1 Internet Systems Consortium DHCP Distribution
9 The major "theme" for ISC DHCP 4.3.x was to update the support for
10 DHCPv6 to include several of the features that have been available
11 for DHCPv4. These include:
13 - Support the use of classes
15 - Support for on_commit, on_expiry and on_release statements
17 - Better logging of address assignments
19 - Support for using DHCPv6 relay options in expressions
21 This release also adds suppport for the standard DDNS as described in the
22 current RFCs as well as enhancing support for dynamically adding and removing
25 There are a number of DHCPv6 limitations and features missing in this
26 release, which will be addressed in the future:
28 - Only Solaris, Linux, FreeBSD, NetBSD, and OpenBSD are supported.
30 - DHCPv6 includes human-readable text in status code messages, in
31 English. A method to reconfigure or support other languages would
34 - The "host-identifier" option is limited to a simple token.
36 - The client and server can only operate DHCPv4 or DHCPv6 at a time,
37 not both. To use both protocols simultaneously, two instances of the
38 relevant daemon are required, one with the '-6' command line option.
40 For information on how to install, configure and run this software, as
41 well as how to find documentation and report bugs, please consult the
44 ISC DHCP uses standard GNU configure for installation. Please review the
45 output of "./configure --help" to see what options are available.
47 The system has only been tested on Linux, FreeBSD, and Solaris, and may not
48 work on other platforms. Please report any problems and suggested fixes to
51 ISC DHCP is open source software maintained by Internet Systems
52 Consortium. This product includes cryptographic software written
53 by Eric Young (eay@cryptsoft.com).
57 - Corrected a static analyzer warning in common/execute.c
60 - ISC DHCP now follows the common convention to use the base name a
61 program is invoked with (aka argv[0], vs. a builtin name) for
62 logs. This should help differentiate syslog entires for DHCPv4 and
63 DHCPv6 servers. You can define OLD_LOG_NAME in includes/site.h to
64 keep the previous behavior.
67 - The linux packet filter code now correctly treats only least significant
68 12 bits an inbound packet's TCI value as the VLAN id (per IEEE 802.1Q).
69 Prior to this it was using the entire 16 bit value as the VLAN id and
70 incorrectly discarding packets. Thanks to Jiri Popelka at Red Hat for
71 reporting this issue and supplying its patch.
74 - Fixed several issues static analysis issues such as potential null
75 references, unchecked strdup returns. Thanks to Bill Parker (wp02855 at
76 gmail dot com) who identified these issues and supplied patches to
81 - Corrected compilation errors that prohibited building the server
82 and its ATF unit tests when failover is disabled.
85 - Added the lease address to the end of the debug level log message
86 emitted when an existing lease is renewed within the dhcp-cache-threshold.
87 Thanks to Nathan Neulinger at Missouri S&T for suggesting the change.
90 - Added dhcpv6 and delayed-ack to settings listed in the "Features:"
91 section of the configure script output. Additionally, all of the
92 features reported on will now always show either a "yes" or "no"
93 value. Prior to this features left to their default setting would
97 - Added a parameter, authoring-byte-order, to the lease file. This value
98 is automatically added to the top of new lease files by the server and
99 indicates the internal byte order (big endian or little endian) of the
100 server. This permits lease files generated on a server with one form of
101 byte order to be used on a server with the opposite form. Our thanks to
102 Timothe Litt for calling this to our attention and for the suggestions
106 - Fixed a small memory leak in the DHCPv6 version of the client code.
107 This is unlikely to cause significant issues in actual use.
110 - Corrected a few minor memory leaks in omapi's dereferencing of
111 host objects. Thanks to Jiri Popelka at Red Hat for reporting
112 the issue and supplying the patches.
116 - Cleaned up some of the Make infrastructure to make --with-libbind
117 work better. Though it still only works with an absolute path.
120 - Made the embedded bind libraries able to be cross compiled
121 (please refer to the bind9 documentation to learn how to cross
122 compile DHCP and its bind library dependency).
125 - Update the client code to better support getting IA_NAs and IA_PDs
126 in the same packet, see RFC7550 for some discussion.
129 ! Update the bounds checking when receiving a packet.
130 Thanks to Sebastian Poehn from Sophos for the bug report and a suggested
135 - When handling an incorrect command line for dhcpd, dhclient or dhcrelay
136 print out a specific error message about the first error in addition
137 to the usage string. This may be disabled by editing includes/site.h.
141 - The configure script will now exit with an error message if it cannot find
142 a GNU-style make tool (needed when building BIND libraries) or pkg-config
143 (needed to locate ATF used for building unit tests). Prior to this the
144 script would exit indicating success causing subsequent attempts to build
145 the software to fail.
148 - Properly terminate strings before passing them to regex and fix
149 a boudnary error when creating certain new data strings.
150 Thanks to Andrey Jr. Melnikov for the bug report.
153 - Option expressions, such as prepend and append, are now supported when
154 running dhclient for IPv6. Prior to this such statements in the
155 client configuration file would be parsed but have no affect. Thanks
156 to Jiri Popelka at Red Hat for reporting the issue.
159 - A failover primary server will now accept a binding status update from the
160 secondary which transitions a lease from ACTIVE to ABANDONED. This accounts
161 for instances in which a client declines a lease and only the secondary
162 server receives it. Prior to this the primary server would reject such an
163 update as an "invalid state transition".
166 - Properly allocate memory for a bpf filter.
167 Thanks to Bill Parker (wp02855 at gmail dot com) who identified this issue.
170 - Updated contrib/dhcp-lease-list.pl to handle garbage in the oui file better
171 and to print out the hostnames a bit better.
172 Thanks to Antoine Beaupré from Debian for the suggested patch.
175 - Updated support for cross compiling by allowing the library archiver
176 to be set at configure time via the environment variable 'AR'.
179 Changes since 4.3.3b1
185 - The server now does a better check to see if it can allocate the memory
186 for large blocks of v4 leases and should provide a slightly better error
187 message. Note well: the server pre-allocates v4 addresses, if you use
188 a large range, such as a /8, the server will attempt to use a large
189 amount of memory and may not start if there either isn't enough memory
190 or the size exceeds what the code supports.
193 - The server will now reject unicast Request, Renew, Decline, and Release
194 messages from a client unless the server would have sent that client the
195 dhcp6.unicast option. This behavior is in compliance with paragraph 1 in
196 each of the sections 18.2,1, 18.2.3, 18.2.6, and 18.2.7 of RFC 3315. Prior
197 to this, the server would simply accept the messages. Now, in order for
198 the server to accept such a message, the server configuration must include
199 the dhcp6.unicast option either globally or within the shared network to
200 which the requested lease belongs. In other words, the server will map
201 the first IA_XX address found within the client message to a shared-network
202 and look for the presence of the unicast option there and then globally.
203 Thanks to Jiri Popelka at Red Hat for this issue and his patch which
207 - The ATF (Automated Testing Framework) tools used for optional unit tests
208 can now be built from its embedded sources in bind, solving the
209 atf-run / atf-report issue with recent (>= 0.20) versions of ATF.
210 The new configuration option is "./configure --with-atf=bind".
211 [ISC-Bugs #38754, #39300]
213 - Corrected a compilation error introduced by the fix for ISC-Bugs #22806.
214 On older linuxes that do not include the tpacket_auxdata structure don't
215 bother allocating the cmsgbuf as it isn't necessary and we don't have
216 a proper length for it.
219 - Remove the dst directory. This was replaced in 4.2.0 with the dst
220 code from the Bind libraries but we continued to include it for
221 backwards compatibility. As we have now released 4.3.x it seems
222 reasonable to remove it.
225 - Write out the DUID server id on startup in all cases, previously if it
226 was read in from server-duid option in the config or lease files for
227 DHCPv4 it would not be written to the new lease file.
230 - When parsing dates for leases convert dates past 2038 to "never".
231 This avoids problems with integer overflows in the date and time
232 handling code for people that decide to use very large lease times
233 or add a lease entry with a date far in the future.
236 - Leave the siaddr field clear when sending a NACK as per RFC 2131
240 - In the client don't send expired addresses to the script as part of
241 the binding process. Thanks to Sven Trenkel at Google for reporting
242 the issue and suggesting the patch.
245 - While parsing IPv6 addresses treat "add" as part of the address instead
249 - Add support for accessing the v4 lease queues (active, free etc) in a
250 binary fashion instead of needing to walk through a linear list to
251 insert, find or remove an entry from the queues. In addition add a
252 compile time option "--enable-binary-leases" to enable the new code
253 or to continue using the old code. The old code is the default.
254 Thanks to Fernando Soto from BlueCat Networks for the patch.
257 - Delayed-ack now works properly with Failover. Prior to this, bind updates
258 post startup were being queued but never delivered. Among other things, this
259 was causing leases to not transition from expired or released to free.
262 - Clean up parsing of v6 lease files a bit to avoid infinite loops if the
263 lease file is corrupt in certain ways.
266 - Corrected a crash in dhclient that occurs during lease renewal if the
267 client is performing its own DNS updates. Thanks to Jiri Popelka at Red Hat
271 - Corrected an issue in v6 lease file parsing. Prior to this, when encountering
272 a lease with an address for which no configured pool exists, the server was
273 declaring the lease file corrupt and incorrectly skipping over the subsequent
274 entry in the file. The server will now emit a log message indicating that
275 no pool was found for the address (or prefix) and correctly resume parsing
276 with the next entry in the lease file. Our thanks to Michal Žejdl for
280 - Be more liberal in finding a subnet group associated with a static
281 prefix. When we added the class matching code for v6 we also added
282 a requirement that the static prefix must be within a subnet the
283 client was in, in order to find the proper statements. We now
284 look for a subnet based on the prefix, failing that on the static
285 address for the client and failing that on the shared network
289 - Add a new action expression "parse_vendor_options", which can be used
290 to parse a vendor-encapsualted-option received by the server based on
291 the encoding specified by the vendor-option-space statement.
294 - Enhance the PARANOIA patch to include fchown() the lease file to
295 allow it to be manipulated after the server does a chown().
296 Thanks to Jiri Popelka at Red Hat for the patch.
299 - Relax the requirement that prefix pools must be within the subnet.
300 This was added in as part of #32453 in order to avoid configuration
301 mistakes but is being removed as prefixes aren't required to be
302 within the same subnet and many people configure them in that fashion.
305 - Fixed a server crash that could occur when the server attempts to remove
306 the billing class from the last lease billed to a dynamic class after said
307 class has been deleted. Our thanks to Lasse Pesonen for reporting the
311 - LDAP Patches - Numerous small patches submitted by contributors have
312 been applied to the contributed code which supplies LDAP support.
313 In addition, two larger submissions have also been included. The
314 first adds support for IPv6 configuration and the second provides
315 GSSAPI authentication. We would like to thank the following for their
316 contributions (alphabetically):
318 Bill Parker (wp02855 at gmail dot com)
319 Jiri Popelka at Red Hat
320 Marius Tomaschewski at SUSE
321 (william at adelaide.edu.au), The University of Adelaide
337 - Handle an out of memory condition in the client a bit better.
338 Thanks to Frédéric Perrin from Brocade for finding the issue
339 and suggesting a patch.
342 Changes since 4.3.2rc2
345 Changes since 4.3.2rc1
347 - Corrected a compilation error introduced by the fix for ISC-Bugs #37415.
348 The error occurs on Linux variants that do not support VLAN tag information
349 in packet auxiliary data. The configure script now only enables inclusion
350 of the VLAN tag-based logic if it is supported by the underlying OS.
353 Changes since 4.3.2b1
355 - Specifying the option, --disable-debug, on the configure script command line
356 now disables debug features. Prior to this, specifying --disable-debug
357 incorrectly enabled debug features. Thanks to Gustavo Zacarias for reporting
361 - Unit test execution now uses a path augmented during configuration
362 processing of the --with-atf option to locate ATF runtime tools, atf-run
363 and atf-report. For most installations of ATF, this should alleviate the
364 need to manually include them in the PATH, as was formerly required.
365 If the configure script cannot locate the tools it will emit a warning,
366 informing the user that the tools must be in the PATH when running unit
368 Secondly, please note that "make check" will now exit with a failure status
369 code (non-zero) if one or more unit tests fail. This means that invoking
370 "make check" from an upper level directory will cause the make process to
371 STOP after the first test subdirectory with failed test(s). To force all
372 tests in all subdirectories to run, regardless of individual test outcome,
373 use the command "make -k check".
378 - Corrected parser's right brace matching when a statement contains an error.
381 - TSIG-authenticated dynamic DNS updates now support the use of these
382 additional algorithms: hmac-sha1, hmac-sha224, hmac-sha256, hmac-sha384,
386 - Added check for invalid failover message type. Thanks to Tobias Stoeckmann
387 working with the OpenBSD project who spotted the issue and provided the
391 - Corrected rate limiting checks for bad packet logging. Thanks to Tobias
392 Stoeckmann working with the OpenBSD project who spotted the issue and
396 - Log statements depicting what files will be used by the server now occur
397 after the configuration file has been processed.
400 - Addressed Coverity issues reported as of 07-31-2014:
401 [ISC-Bugs #36712] Corrects Coverity reported "high" impact issues.
402 [ISC-Bugs #36933] Corrects Coverity reported "medium" impact issues
403 [ISC-Bugs #37708] Fixes compilation error in dst_api.c seen in older
404 compilers that was introduced by #36712
406 - Server now supports a failover split value of 256.
409 - Remove unneeded error #defines. These defines were included in case
410 external programs required the older versions of the macro. They
411 have been #ifdeffed for now and will be removed at a future date.
412 See site.h for the #define to include them again, but you should
413 switch to using the DHCP_R_* versions instead of the ISC_R_* versions.
414 Also ISC_R_MULTIPLE has been removed as it is also defined in bind.
417 - Added checks in range6 and prefix6 statement parsing to ensure addresses
418 are within the declared subnet. Thanks to Jiri Popelka at Red Hat for the
419 bug report and patch.
426 - Addressed checksum issues:
427 Added checksum readiness check to Linux packet filtering which eliminates
428 invalid packet drops due to checksum errors when checksum offloading is
429 in use. Based on dhcp-4.2.2-xen-checksum.patch made to the Fedora project.
436 Inbound packets with UDP checksums of 0xffff now validate correctly rather
441 - Added the echo-client-id configuration parameter to the server configuration.
442 The server now supports RFC 6842 compliant behavior by setting a new
443 configuration parameter, echo-client-id. When enabled, the server will
444 include the client identifier option (Option code 61) if received, in its
445 responses. The server identifier returned in NAKs (if enabled) will now
446 be the globally defined value (if one) if the server cannot attribute the
447 inbound request to a known subnet.
451 - Added support of the configuration parameter, use-host-decl-names, to
452 BOOTP request handling.
455 - Added logic to ignore the signal, SIGPIPE, which ensures write failures
456 will be delivered as errors rather than as SIGPIPE signals on all OSs.
457 Thanks to Marius Tomaschewski from SUSE who reported the issue and provided
458 the patch upon which the fix is based.
461 - In the failover code, handle the case of communications being interrupted
462 when the servers are dealing with POTENTIAL-CONFLICT. This patch allows
463 the primary to accept the secondary moving from POTENTIAL-CONFLICT to
464 RESOLUTION-INTERRUPTED as well as handling the bind update process better.
465 In addition the code to resend update or update all requests has been
466 modified to send requests more often.
470 - By default, the server will now choose the value to use in the forward DNS
471 name from the following in order of preference:
473 1. FQDN option if provided by the client
474 2. Host name option if provided by the client
475 3. Configured option host-name if defined
477 As before, this may be overridden by defining ddns-hostname to the desired
478 value (or expression). In addition, the server logic has been extended to
479 use the value of the host name declaration if use-host-decl-names is enabled
480 and no other value is available.
483 - DNS updates were being attempted when dhcp-cache-threshold enabled the use of
484 the existing lease and the forward DNS name had not changed. This has been
489 - Corrected an issue which caused dhclient to incorrectly form the result when
490 prepending or appending to the IPv4 domain-search option, received from the
491 server, when either of the values being combined contain compressed
495 - Added the server-id-check parameter to the server configuration.
496 This parameter allows run-time control over whether or not a server,
497 participating in failover, verifies the dhcp-server-identifier option in
498 DHCP REQUESTs against the server's id before processing the request.
499 Formerly, enabling this behavior was done at compilation time through
500 the use of the #define, SERVER_ID_CHECK, which has been removed from site.h
501 The functionality is now only available through the new runtime parameter.
504 - During startup, when the server encounters a lease whose binding state is
505 FTS_BACKUP but whose pool has no configured failover peer, it will reset the
506 lease's binding state to FTS_FREE. This allows the leases to be reclaimed
507 by the server after a pool's configuration has changed from failover to
508 standalone. Prior to this such leases would remain stuck in the backup state
509 making them unavailable for assignment. Note this conversion will occur
510 whether or not the server is compiled for failover.
513 - Fixed a small issue in the treatment of hosts in the inform processing
514 that could cause the response to an inform to include information from
515 the wrong scope. The two examples we've heard of are getting subnet
516 instead of group information associated with a host entry, or getting
517 global information instead of subnet if the host entry was built via
518 omapi. Thanks to Julien Soula at University of Lille for finding the
519 bug and supplying a patch.
522 - Avoid calling pool_timer() recursively from supersede_lease(). This could
523 result in leases changing state incorrectly or delaying the running of the
524 leae expiration code.
527 - Move the check for a PID file and process to be before we rewrite the
528 lease file. This avoids the possibility of starting a second instance
529 of a server which changes the current lease file confusing the first
530 instance. This check is only included if the admin hasn't disabled PID
535 - In the client code change the way preferred_life and max_life are printed
536 for environment variables to be unsigned rather than signed.
537 Thanks to Jiri Popelka at Red Hat for the bug report and patch.
540 - Modified linux packet handling such that packets received via VLAN are now
541 seen only by the VLAN interface. Prior to this, such packets were seen by
542 both the VLAN interface and its parent (physical) interface, causing the
543 server to respond to both. Note this remains an issue for non-Linux OSs.
544 Thanks to Jiri Popelka at Red Hat for the patch.
550 - Log content has been changed to more directly suggest that admins should
551 check for multiple IPv6 clients attempting to use the same DUID when only
552 abandoned addresses are available. Debug level logging will now emit counts
553 of the total number of, in-use, and abandoned addresses in a shared subnet
554 when the server finds no addresses available for a given DUID. Lastly,
555 threshold logging is now automatically disabled for shared subnets whose
556 total number of possible addresses exceeds (2^64)-1.
560 - Added a global parameter, prefix-length-mode, which may be used to determine
561 how the server uses a non-zero value for prefix-length supplied by clients
562 when soliciting DHCPv6 prefixes. The server supports selection modes of:
563 ignore, prefer, exact, minimum and maximum which are described in detail in
564 the server man pages. The prior behavior of the server was to only offer a
565 prefix whose length exactly matched the prefix-length value requested. If
566 no such prefixes were available, the server returned a status of none
567 available. Note the default mode, "exact", provides this same behavior.
571 - Corrected inconsistencies in dhcrelay's setting the upper interface hop count
572 limit such that it now sets it to 32 when the upstream address is a multicast
573 address per RFC 3315 Section 20. Prior to this if the -u argument preceded
574 the -l argument on the command line or if the same interface was specified
575 for both; the logic to set the hop limit count for the upper interface was
576 skipped. This caused the hop count limit to be set to the default value
577 (typically 1) in the outbound upstream packets.
581 Changes since 4.3.1b1
583 - Modify the linux and openwrt dhclient scripts to process information
584 from a stateless request. Thanks to Jiri Popelka at Red Hat for the
585 bug report and patch.
588 - Remove more unused RCSID tags. These weren't noticed in 4.3 as
589 the code isn't used anymore but we remove them here to keep the
590 code consistent across versions.
595 - Tidy up several small tickets.
596 Correct parsing of DUID from config file, previously the LL type
597 was put in the wrong place in the DUID string.
599 Add code to parse "do-forward-updates" as well as "do-forward-update"
600 Thanks to Jiri Popelka at Red Hat.
602 Remove log_priority as it isn't currently used.
604 Increase the size of the buffer used for reading interface information.
607 - Remove an extra set of the msg_controllen variable.
610 - Add a more understandable error message if a configuration attempts
611 to add multiple keys for a single zone. Thanks to a patch from Jiri
615 - Fix some minor issues in the dst code.
618 - Properly #ifdef functions so that the code can compile without NSUPDATE.
621 - Update the partner's stos (start time of state, basically when we last
622 heard from this partner) field when updating the state in failover.
625 - Modify the overload processing to allow space for the remote agent ID.
627 Handle the ordering of the SUBNET_MASK option even if it is the last
631 - Remove the code that allows a server to follow RFC3315 instead of
632 the subsequent errata from August 2010 when determining which IAs
633 to include if no addresses will be assigned.
636 - Remove unused RCSID tags.
639 - Correct the v6 client timing code. When doing the timing backoff
640 for MRT limit it to MRD.
641 Thanks to Jiri Popelka at Red Hat for the bug report and fix.
644 - Add a log entry when killing a client and remove the PID files
645 when a server, relay or client are killed.
649 - Some minor cleanups in the client code.
650 In addition to checking for dhcpc check for bootpc in the services list.
652 Correct the client code to only try to get a lease once when the
653 given the "-1" argument.
654 Thanks to Jiri Popelka at Red Hat for the bug report and fix.
656 When asked for the version don't send the output to syslog.
658 Add the next server information to the environment variables for
659 use by the client script. In order to avoid changing the client
660 lease file the next server information isn't written to it.
661 Thanks to Tomas Hozza at Red Hat for the suggestion and a prototype fix.
664 - Several updates to the dhcp server code.
665 When not in quiet mode print out the files being used.
667 As accessing some pid files may require privileges move the dropping
668 of permission bits due to the paranoia patch to be after the pid code.
669 Thanks to Jiri Popelka at Red Hat for the bug report and fix.
671 When processing a "--version" request don't output the version information
674 - Add the "enable-log-pid" build option to the configure script. When enabled
675 this causes the client, server and relay programs to include the PID
676 number in syslog messages.
677 Thanks to Marius Tomaschewski for the suggestion and proto-patch.
680 - Add a #define to specify the prefix length used when a client attempts
681 to configure an address. This can be modified by editing includes/site.h.
682 By default it is set to 64. While 128 might be a better choice it would
683 also be a change for currently running systems, so we have left it at 64.
686 - Add a run time option to the client "-df" to allow the administrator to
687 point to a second lease file the client can search for a DUID. This can
688 be used to allow a v4 and a v6 instance of the client to share a DUID.
689 The second file will only be searched if there isn't a DUID in the main
690 lease file and the DUID will be written out to the main lease file.
693 - Have the client fsync the lease file to avoid lease corruption if the
694 client hibernates or otherwise shuts down.
697 - Add a check for L2VLAN in bpf.c to help support VLAN interfaces
698 Thanks to Steinar Haug for the suggestion.
701 - Modify the handling of the resolv.conf file to allow the DHCP
702 process to start up even if the resolv.conf file has problems.
705 - Add threshold logging functionality. Two new options,
706 log-threshold-low and log-threshold-high, indicate to the
707 server if and when it should log an error message as addresses
711 - Add code to properly dereference a pointer in the dhclient code
712 on an error condition.
715 - Add code to help clean up soft leases.
718 - Disable the gentle shutdown functionality until we can determine
719 the best way to present it to remove or reduce the side effects.
722 Changes since 4.3.0rc1
725 Changes since 4.3.0b1
727 - Tidy up receive packet processing.
728 Thanks to Brad Plank of GTA for reporting the issue and suggesting
732 Changes since 4.3.0a1
734 - Modify the message displayed when a process hits a fatal error.
735 The new message is much shorter and simply points to the README
736 and our website for directions on bug submissions.
739 - Handle an absent resolv.conf file better.
742 Changes since 4.2.0 (new features)
744 - If a client renews before 'dhcp-cache-threshold' percent of its lease
745 has elapsed (default 25%), the server will reuse the allocated lease
746 (provide a lease within the currently allocated lease-time) rather
747 than extend or renew the lease. This absolves the server of needing
748 to perform an fsync() operation on the lease database before reply,
749 which improves performance. [ISC-Bugs #22228]
750 Updated this patch to support asynchronous DDNS. If the server is
751 attempting to do DDNS on a lease it should be updated and written to
752 disk even if that wouldn't be necessary due to the thresholding.
755 - The 'no available billing' log line now also logs the name of the last
756 matching billing class tried before failing to provide a billing.
759 - A problem with missing get_hw_addr function when --enable-use-sockets
760 was used is now solved on GNU/Linux, BSD and GNU/Hurd systems. Note
761 that use-sockets feature was not tested on those systems. Client and
762 server code no longer use MAX_PATH constant that is not defined on
763 GNU/Hurd systems. [ISC-Bugs #25979]
765 - Add a perl script in the contrib directory, dhcp-lease-list.pl, which
766 can parse v4 lease files and output the lease information in a more
767 human friendly manner. This was written by Christian Hammers with
768 some updates by vom and ISC. This is contributed code and is not
769 supported by ISC; however it may be useful to some users.
772 - Add support in v6 for on-commit, on-expire and on-release.
775 - Add support for using classes with v6.
778 - Update the DDNS code to current standards and allow for sharing
779 of DDNS entries between v4 and v6 clients. The new code is used
780 if the ddns-update-style is set to "standard", the older code is
781 still available if ddns-update-style is set to "interim". The
782 oldest DDNS code "ad-hoc" has been removed. Thanks to Thomas Pegeot
783 who submitted a patch for this issue. This patch is based on
784 that work with some modifications.
787 - Add a configuration option to the server to suppress using fsync().
788 Enabling this option will mean that fsync() is never called. This
789 may provide better performance but there is also a risk that a lease
790 will not be properly written to the disk after it has been issued
791 to a client and before the server stops. Using this option is
795 - Add some logging statements to indicate when the server is ready
796 to serve. One statement is emitted after the server has finished
797 reading its files and is about to enter the dispatch loop.
798 This is "Server starting service.".
799 The second is emitted when a server determines that both it and
800 its failover peer are in the normal state.
801 This is "failover peer <name>: Both servers normal."
804 - Add support for accessing options from v6 relays. The v6relay
805 statement allows the administrator to choose which relay to
806 use when searching for an option, see the dhcp-options man page
807 for a description. The host-identifier option has also been
808 updated to support the use of relay options, see the dhcpd.conf
809 man page for a description.
812 - When doing DDNS if there isn't an appropriate zone statement attempt
813 to find a reasonable nameserver via a DNS resolver. This restores
814 some functionality that was lost in the transition to asynchronous
815 DDNS. Due to the lack of security and increase in fragility of the
816 system when using this feature we strongly recommend the use of
817 appropriate zone statements rather than using this functionality.
820 - Add support for specifying the address from which to send
821 DDNS updates on the DHCP server. There are two new options
822 "ddns-local-address4" and "ddns-local-address6" that each take
823 one instance of their respective address types.
826 - Add ignore-client-uids option in the server. This option causes
827 the server to not record a client's uid in its lease. This
828 violates the specification but may also be useful when a client
829 can dual boot using different client ids but the same mac address.
830 Thank you to Brian De Wolf at Cal Poly Pomona for the patch.
834 - Extend the DHCPINFORM processing to honor the subnet selection option
835 and take host declarations into account.
836 Thanks to Christof Chen for testing and submitting the patch.
839 - Extend the hardware expression to look into the lease structure
840 for a hardware address if there is no packet. This allows the
841 server to find the hardware address during on-expiry processing.
844 - Add definitions for some options that have been specified by the IETF.
848 Changes since 4.2.0 (bug fixes)
850 - When using 'ignore client-updates;', the FQDN returned to the client
851 is no longer truncated to one octet.
853 - Cleaned up an unused hardware address variable in nak_lease().
855 - Manpage entries for the ia-pd and ia-prefix options were updated to
856 reflect support for prefix delegation.
858 - Cleaned up some compiler warnings
860 - An optimization described in the failover protocol draft is now included,
861 which permits a DHCP server operating in communications-interrupted state
862 to 'rewind' a lease to the state most recently transmitted to its peer,
863 greatly increasing a server's endurance in communications-interrupted.
864 This is supported using a new 'rewind state' record on the dhcpd.leases
865 entry for each lease.
867 - Fix the trace code which was broken by the changes to the DDNS code.
869 - Update the fsync code to work with the changes to the DDNS code. It now
870 uses a timer instead of noticing if there are no more packets to process.
872 - When constructing the DNS name structure from a text string append
873 the root to relative names. This satisfies a requirement in the DNS
874 library that names be absolute instead of relative and prevents DHCP
875 from crashing. [ISC-Bugs #21054]
877 - "The LDAP Patch" that has been circulating for some time, written by
878 Brian Masney and S.Kalyanasundraram and maintained for application to
879 the DHCP-4 sources by David Cantrell has been included. Please be
880 advised that these sources were contributed, and do not yet meet the
881 high standards we place on production sources we include by default.
882 As a result, the LDAP features are only included by using a compile-time
883 option which defaults off, and if you enable it you do so under your
884 own recognizance. We will be improving this software over time.
887 - Prohibit including lease time information in a response to a DHCP INFORM.
890 ! Accept a client id of length 0 while hashing. Previously the server would
891 exit if it attempted to hash a zero length client id, providing attackers
892 with a simple denial of service attack. [ISC-Bugs #21253]
893 CERT: VU#541921 - CVE: CVE-2010-2156
895 - A memory leak in ddns processing was closed. [ISC-Bugs #21377]
897 - Modify the exception handling for initial context creation. Previously
898 we would try and clean up before exiting. This could present problems
899 when the cleanup required part of the context that wasn't available. It
900 also didn't do much as we exited afterwards anyway. Now we simply log
901 the error and exit. [ISC-Bugs #21093]
903 - A bug was fixed that could cause the DHCPv6 server to advertise/assign a
904 previously allocated (active) lease to a client that has changed subnets,
905 despite being on different shared networks. Dynamic prefixes specifically
906 allocated in shared networks also now are not offered if the client has
907 moved. [ISC-Bugs #21152]
909 - Add some debugging output for use with the DDNS code. [ISC-Bugs #20916]
911 - Fix the trace code to handle timing events better and to truncate a file
912 before using instead of overwriting it. [ISC-Bugs #20969]
914 - Modify the determination of the default TTL to use for DDNS updates.
915 The user may still configure the ttl via ddns-ttl. The default for
916 both v4 and v6 is now 1/2 the (preferred) lease time with a limit. The
917 previous defaults (1/2 lease time without a limit for v4 and a default
918 value for v6) may be used by defining USE_OLD_DDNS_TTL in site.h
921 - libisc/libdns is now brought up to version 9.7.1rc1. This corrects
922 three reported flaws in ISC DHCP;
924 o DHCP processes (dhcpd, dhclient) fail to start if one of either the
925 IPv4 or IPv6 address families is not present. [ISC-Bugs #21122]
927 o Assertion failure when attempting to cancel a previously running DDNS
928 update. [ISC-Bugs #21133]
930 o Compilation failure of libisc/libdns due to the use of a flexible
931 array member. [ISC-Bugs #21316]
933 - Add declaration for variable in debug code in alloc.c. [ISC-Bugs #21472]
935 - Documentation cleanup covering multiple tickets
936 [ISC-Bugs #20265] [ISC-Bugs #20259] minor cleanup
937 [ISC-Bugs #20263] add text describing some default values
938 [ISC-Bugs #20193] single quotes at the start of a line indicate a control
939 line to nroff, escape them if we actually want a quote.
940 [ISC-Bugs #18916] sync the pointer to web pages amongst the different docs
942 - 'get-host-names true;' now also works even if 'use-host-decl-names true;'
943 was also configured. The nature of this repair also fixes another
944 error; the host-name supplied by a client is no longer overridden by a
945 reverse lookup of the lease address. Thanks to a patch from Wilco Baan
946 Hofman supplied to us by the Debian package maintenance team.
947 [ISC-Bugs #21691] {Debian Bug#509445}
949 - The .TH tag for the dhcp-options manpage was typo repaired
950 thanks to a report from jidanni and the Debian package maintenance
951 team. [ISC-Bugs #21676] {Debian Bug#563613}
953 - More documentation changes - primarily to put the options in the dhclient
954 and dhcpd man pages into the standard form. Thanks in part to a patch
955 from David Cantrell at Red Hat.
956 [ISC-Bugs #20264] and parts of [ISC-Bugs #17744] dhclient.8 changes
958 - Add code to clear the pointer to an object in an OMAPI handle when the
959 object is freed due to a dereference. [ISC-Bugs #21306]
961 - Fixed a bug that leaks host record references onto lease structures,
962 causing the server to apply configuration intended for one host to any
963 other innocent clients that come along later. [ISC-Bugs #22018]
966 [ISC-Bugs #19566] When trying to find the zone for a name for ddns allow
967 the name to be at the apex of the zone.
968 [ISC-Bugs #19617] Restrict length of interface name read from command line
969 in dhcpd - based on a patch from David Cantrell at Red Hat.
970 [ISC-Bugs #20039] Correct some error messages in dhcpd.c
971 [ISC-Bugs #20070] Better range check on values when creating a DHCID.
972 [ISC-Bugs #20198] Avoid writing past the end of the field when adding
973 overly long file or server names to a packet and add a log message
974 if the configuration supplied overly long names for these fields.
975 Thanks to Martin Pala.
976 [ISC-Bugs #21497] Add a little more randomness to rng seed in client
977 thanks to a patch from Jeremiah Jinno.
979 - Correct error handling in DLPI [ISC-Bugs #20378]
981 - Remove __sun__ and __hpux__ typedefs in osdep.h as they are now being
982 checked in configure. [ISC-Bugs #20443]
984 - Modify how the cmsg header is allocated the v6 send and received routines
985 to compile on more compilers. [ISC-Bugs #20524]
987 - When parsing a domain name free the memory for the name after we are
988 done with it. [ISC-Bugs #20824]
990 - Add an elapsed time option to the release message and refactor the
991 code to move most of the common code to a single routine.
994 - Two identical log messages for commit_leases() have been disambiguated.
997 - Parse date strings more properly - the code now handles semi-colons in
998 date strings correctly. Thanks to a patch from Jiri Popelka at Red Hat.
999 [ISC-Bugs #21501, #20598]
1001 - Fixes to lease input and output.
1002 [ISC-Bugs #20418] - Some systems don't support the "%s" argument to
1003 strftime, paste together the same string using mktime instead.
1004 [ISC-Bugs #19596] - When parsing iaid values accept printable
1006 [ISC-Bugs #21585] - Always print time values in omshell as hex
1007 instead of ascii if the values happen to be printable characters.
1009 - Minor changes for scripts, configure.ac and Makefiles
1010 [ISC-Bugs #19147] Use domain-search instead of domain-name in manual and
1011 example conf file. Thanks to a patch from David Cantrell
1013 [ISC-Bugs #19761] Restore address when doing a rebind in DHCPv6
1014 [ISC-Bugs #19945] Properly close the quote on some arguments.
1015 [ISC-Bugs #20952] Add 64 bit types to configure.ac
1016 [ISC-Bugs #21308] Add "PATH=" to CLIENT_PATH environment variable
1018 - Update the code to parse dhcpv6 lease files to accept a semi-colon at
1019 the end of the max-life and preferred-life clauses. In order to be
1020 backwards compatible with older lease files not finding a semi-colon
1021 is also accepted. [ISC-Bugs #22303].
1023 ! Handle a relay forward message with an unspecified address in the
1024 link address field. Previously such a message would cause the
1025 server to crash. Thanks to a report from John Gibbons. [ISC-Bugs #21992]
1026 CERT: VU#102047 CVE: CVE-2010-3611
1028 - ./configure on longer searches for -lcrypto to explicitly link against.
1029 This fixes a bug where 'dhclient' would have shared library dependencies
1030 on '/usr/lib'. [ISC-Bugs #21967]
1032 - Handle pipe failures more gracefully. Some OSes pass a SIGPIPE
1033 signal to a process and will kill the process if the signal isn't
1034 caught. This patch adds code to turn off the SIGPIPE signal via
1035 a setsockopt() call. The signal is already being ignored as part
1036 of the ISC library. [ISC-Bugs #22269]
1038 - Restore printing of values in omshell to the style pre 21585. For
1039 21585 we changed the print routines to always display time values
1040 as a hex list. This had a side effect of printing all data strings
1041 as a hex list. We shall investigate other ways of displaying time
1042 values more usefully. [ISC-Bugs #22626]
1044 ! Fix the handling of connection requests on the failover port.
1045 Previously a connection request from a source that wasn't
1046 listed as a failover peer would cause the server to become
1047 non-responsive. Thanks to a report from Brad Bendily, brad@bendily.com.
1049 CERT: VU#159528 CVE: CVE-2010-3616
1051 - Don't pass the ISC_R_INPROGRESS status to the omapi signal handlers.
1052 Passing it through to the handlers caused the omshell program to fail
1053 to connect to the server. [ISC-Bugs #21839]
1055 - Fix the parenthesis in the code to process configuration statements
1056 beginning with "auth". The previous arrangement caused
1057 "auto-partner-down" to be processed incorrectly. [ISC-Bugs #21854]
1059 - Limit the timeout period allowed in the dispatch code to 2^^32-1 seconds.
1060 Thanks to a report from Jiri Popelka at Red Hat.
1061 [ISC-Bugs #22033], [Red Hat Bug #628258]
1063 - When processing the format flags for a given option consume the
1064 flag indicating an optional value correctly. A symptom of this
1065 bug was an infinite loop when trying to parse the slp-service-scope
1066 option. Thanks to a patch from Marius Tomaschewski.
1069 - Disable the use of kqueue in the ISC library. This avoids a problem
1070 between the fork and socket code that caused the dhcpd process to
1071 use all available cpu if the program daemonized itself.
1074 ! When processing a request in the DHCPv6 server code that specifies
1075 an address that is tagged as abandoned (meaning we received a
1076 decline request for it previously) don't attempt to move it from
1077 the inactive to active pool as doing so can result in the server
1078 crashing on an assert failure. Also retag the lease as active
1079 and reset its timeout value.
1082 - Removed the restriction on using IPv6 addresses in IPv4 mode. This
1083 allows IPv4 options which contain IPv6 addresses to be specified. For
1084 example the 6rd option can be specified and used like this:
1087 option 6rd code 212 = { integer 8, integer 8,
1088 ip6-address, array of ip-address };
1089 option 6rd 16 10 2001:: 1.2.3.4, 5.6.7.8;
1091 - Handle some DDNS corner cases better. Maintain the DDNS transaction
1092 information when updating a lease and cancel any existing transactions
1093 when removing the ddns information.
1096 - Some fixes for LDAP
1097 [ISC-Bugs #21783] - Include lber library when building ldap
1098 [ISC-Bugs #22888] - Enable the ldap code when buidling common
1099 The above fixes are from Jiri Popelka at Red Hat.
1101 - Modify the dlpi code to accept getmsg() returning a positive value.
1104 ! In dhclient check the data for some string options for
1105 reasonableness before passing it along to the script that
1106 interfaces with the OS.
1110 - DHCPv6 server now responds properly if client asks for a prefix that
1111 is already assigned to a different client. [ISC-Bugs #23948]
1113 - Add the option "--no-pid" to the client, relay and server code,
1114 to disable writing a pid file. Add the option "-pf pidfile"
1115 to the relay to allow the user to supply the pidfile name at
1116 runtime. Add the "with-relay6-pid-file" option to configure
1117 to allow the user to supply the pidfile name for the relay
1118 in v6 mode at configure time.
1119 [ISC-Bugs #23351] [ISC-Bugs #17541]
1121 - 'dhclient' no longer waits a random interval after first starting up to
1122 begin in the INIT state. This conforms to RFC 2131, but elects not to
1123 implement a 'SHOULD' direction in section 4.1. The goal of this change
1124 is to start up faster. [ISC-Bugs #19660]
1126 - Added 'initial-delay' parameter that specifies maximum amount of time
1127 before client goes to the INIT state. The default value is 0. In previous
1128 versions of the code client could wait up to 5 seconds. The old behavior
1129 may be restored by using 'initial-delay 5;' in the client config file.
1132 - ICMP ping-check should now sit closer to precisely the number of seconds
1133 configured (or default 1), due to making use of the new microsecond
1134 scale timer internally to dhcpd. This corrects a bug where the server
1135 may immediately timeout an ICMP ping-check if it was made late in the
1136 current second. [ISC-Bugs #19660]
1138 - The DHCP client will schedule renewal and rebinding events in
1139 microseconds if the DHCP server provided a lease-time that would result
1140 in sub-1-second timers. This corrects a bug where a 2-second or lower
1141 lease-time would cause the DHCP client to enter an infinite loop by
1142 scheduling renewal at zero seconds. [ISC-Bugs #19660]
1144 - Client lease records are recorded at most once every 15 seconds. This
1145 keeps the client from filling the lease database disk quickly on very small
1146 lease times. [ISC-Bugs #19660]
1148 - To defend against RFC 2131 non-compliant DHCP servers which fail to
1149 advertise a lease-time (either mangled, or zero in value) the DHCP
1150 client now adds the server to the reject list ACL and returns to INIT
1151 state to hopefully find an RFC 2131 compliant server (or retry in INIT
1152 forever). [ISC-Bugs #19660]
1154 - Parameters configured to evaluate from user defined function calls can
1155 now be correctly written to dhcpd.leases (as on 'on events' or dynamic
1156 host records inserted via OMAPI). [ISC-Bugs #22266]
1158 - If a 'next-server' parameter is configured in a dynamic host record via
1159 OMAPI as a domain name, the syntax written to disk is now correctly parsed
1160 upon restart. [ISC-Bugs #22266]
1162 - The DHCP server now responds to DHCPLEASEQUERY messages from agents using
1163 IP addresses not covered by a subnet in configuration. Whether or not to
1164 respond to such an agent is still governed by the 'allow leasequery;'
1165 configuration parameter, in the case of an agent not covered by a configured
1166 subnet the root configuration area is examined. Server now also returns
1167 vendor-class-id option, if client sent it. [ISC-Bugs #21094]
1169 - Documentation fixes
1170 [ISC-Bugs #17959] add text to AIX section describing how to have it send
1171 responses to the all-ones address.
1172 [ISC-Bugs #19615] update the includes in dhcpctl/dhcpctl.3 to be more correct
1173 [ISC-Bugs #20676] update dhcpd.conf.5 to include the RFC numbers for DDNS
1175 - Relay no longer crashes, when DHCP packet is received over interface without
1176 any IPv4 address assigned. Also extended logging message about discarding
1177 packets with invalid hlen with information about relevant interface name.
1180 - Relay now properly logs that packet was received over interface without
1181 global IPv6 address [ISC-Bugs #24070]
1183 - Linux Packet Filter interface improvement. sockaddr_pkt structure is used,
1184 rather than sockaddr. Packet ethertype is now forced to ETH_P_IP.
1187 - Minor code cleanups - but note port change for #23196
1188 [ISC-Bugs #23470] - Modify when an ignore return macro is defined to
1189 handle unsed error return warnings for more versions of gcc.
1190 [ISC-Bugs #23196] - Modify the reply handling in the server code to
1191 send to a specified port rather than to the source port for the incoming
1192 message. Sending to the source port was test code that should have
1193 been removed. The previous functionality may be restored by defining
1194 REPLY_TO_SOURCE_PORT in the includes/site.h file. We suggest you don't
1195 enable this except for testing purposes.
1196 [ISC-Bugs #22695] - Close a file descriptor in an error path.
1197 [ISC-Bugs #19368] - Tidy up variable types in validate_port.
1199 - Code cleanup: remove obsolete PROTO, KandR, INLINE and ANSI_DECL macros
1202 - Compilation problem with gcc4.5 and omshell.c resolved. [ISC-Bugs #23831]
1204 - Client Script fixes
1205 [ISC-Bugs #23045] Typos in client/scripts/openbsd
1206 [ISC-Bugs #23565] In the client scripts add a zone id (interface id) if
1207 the domain search address is link local.
1208 [ISC-Bugs #1277] In some of the client scripts add code to handle the
1209 case of the default router information being changed without the address
1212 - Documentation cleanup
1213 [ISC-Bugs #23326] Updated References document, several man page updates
1215 - Server no longer complains about NULL pointer when configured
1216 server-identifier expression fails to evaluate. [ISC-Bugs #24547]
1218 - Convert ISC_R_INPROGRESS status to ISC_R_SUCCESS when called from other
1219 than the dispatch handler. This fixes an issue where omshell, when
1220 run from the same platform as the server, would appear to fail to
1221 connect. This is a companion to #21839. [ISC-Bugs #23592]
1223 - Enlarge the buffer size used by the Omshell code and some of the
1224 print routines to allow for greater than 60 characters or, when
1225 printing as hex strings, 20 characters. [ISC-Bugs #22743]
1227 - In Solaris 11 switch to using sockets instead of DLPI, thanks
1228 to a patch form Oracle. [ISC-Bugs #24634].
1230 - Strict checks for content of domain-name DHCPv4 option can now be
1231 configured during compilation time. Even though RFC2132 does not allow
1232 to store more than one domain in domain-name option, such behavior is
1233 now enabled by default, but this may change some time in the future.
1234 See ACCEPT_LIST_IN_DOMAIN_NAME define in includes/site.h.
1237 - DNS Update fix. A misconfigured server could crash during DNS update
1238 processing if the configuration included overlapping pools or
1239 multiple fixed-address entries for a single address. This issue
1240 affected both IPv4 and IPv6. The fix allows a server to detect such
1241 conditions, provides the user with extra information and recommended
1242 steps to fix the problem. If the user enables the appropriate option
1243 in site.h then server will be terminated
1246 ! Two packets were found that cause a server to halt. The code
1247 has been updated to properly process or reject the packets as
1248 appropriate. Thanks to David Zych at University of Illinois
1249 for reporting this issue. [ISC-Bugs #24960]
1250 One CVE number for each class of packet.
1254 - Fix the code that checks for an existing DDNS transaction to cancel
1255 when removing DDNS information, so that we will continue with the
1256 processing if we have a lease even if it doesn't have an outstanding
1257 transaction. [ISC-Bugs #24682]
1259 - Add AM_MAINTAINER_MODE to configure.ac to avoid rebuilding
1260 configuration files. [ISC-Bugs #24107]
1262 - Add support for passing DDNS information to a DNS server over
1263 an IPv6 address. [ISC-Bugs #22647]
1265 - Enhanced patch for 23595 to handle IPv4 fixed addresses more
1266 cleanly. [ISC-Bugs #23595]
1268 ! Add a check for a null pointer before calling the regexec function.
1269 Without this check we could, under some circumstances, pass
1270 a null pointer to the regexec function causing it to segfault.
1271 Thanks to a report from BlueCat Networks.
1275 ! Modify the DDNS handling code. In a previous patch we added logging
1276 code to the DDNS handling. This code included a bug that caused it
1277 to attempt to dereference a NULL pointer and eventually segfault.
1278 While reviewing the code as we addressed this problem, we determined
1279 that some of the updates to the lease structures would not work as
1280 planned since the structures being updated were in the process of
1281 being freed: these updates were removed. In addition we removed an
1282 incorrect call to the DDNS removal function that could cause a failure
1283 during the removal of DDNS information from the DNS server.
1284 Thanks to Jasper Jongmans for reporting this issue.
1288 - Fixed the code that checks if an address the server is planning
1289 to hand out is in a reserved range. This would appear as
1290 the server being out of addresses in pools with particular ranges.
1293 - In the DDNS code handle error conditions more gracefully and add more
1294 logging code. The major change is to handle unexpected cancel events
1295 from the DNS client code.
1298 - Tidy up the receive calls and eliminate the need for found_pkt.
1301 - Add support for Infiniband over sockets to the server and
1302 relay code. We've tested this on Solaris and hope to expand
1303 support for Infiniband in the future. This patch also corrects
1304 some issues we found in the socket code.
1307 - Add a compile time check for the presence of the noreturn attribute
1308 and use it for log_fatal if it's available. This will help code
1309 checking programs to eliminate false positives.
1312 - Fixed many compilation problems ("set, but not used" warnings) for
1313 gcc 4.6 that may affect Ubuntu 11.10 users. [ISC-Bugs #27588]
1315 - Modify the code that determines if an outstanding DDNS request
1316 should be cancelled. This patch results in cancelling the
1317 outstanding request less often. It fixes the problem caused
1318 by a client doing a release where the TXT and PTR records
1319 weren't removed from the DNS.
1322 - Use offsetof() instead of sizeof() to get the sizes for dhcpv6_relay_packet
1323 and dhcpv6_packet in several more places. Thanks to a report from
1324 Bruno Verstuyft and Vincent Demaertelaere of Excentis.
1327 - Remove outdated note in the description of the bootp keyword about the
1328 option not satisfying the requirement of failover peers for denying
1329 dynamic bootp clients.
1332 - Multiple items to clean up IPv6 address processing.
1333 When processing an IA that we've seen check to see if the
1334 addresses are usable (not in use by somebody else) before
1336 When reading in leases from the file discard expired addresses.
1337 When picking an address for a client include the IA ID in
1338 addition to the client ID to generally pick different addresses
1340 [ISC-Bugs #23138] [ISC-Bugs #27945] [ISC-Bugs #25586]
1343 - Remove unnecessary checks in the lease query code and clean up
1344 several compiler issues (some dereferences of NULL and treating
1345 an int as a boolean).
1348 - Fix the NA and PD allocation code to handle the case where a client
1349 provides a preference and the server doesn't have any addresses or
1350 prefixes available. Previously the server ignored the request with
1351 this patch it replies with a NoAddrsAvail or NoPrefixAvail response.
1352 By default the code performs according to the errata of August 2010
1353 for RFC 3315 section 17.2.2; to enable the previous style see the
1354 section on RFC3315_PRE_ERRATA_2010_08 in includes/site.h. This option
1355 may be removed in the future.
1356 Thanks to Jiri Popelka at Red Hat for the patch.
1359 - Fix up some issues found by static analysis.
1360 A potential memory leak and NULL dereference in omapi.
1361 The use of a boolean test instead of a bitwise test in dst.
1364 - Rotate the lease file when running in v6 mode.
1365 Thanks to Christoph Moench-Tegeder at Astaro for the
1366 report and the first version of the patch.
1369 - Correct code to calculate timing values in client to compare
1370 rebind value to infinity instead of renew value.
1371 Thanks to Chenda Huang from H3C Technologies Co., Limited
1372 for reporting this issue.
1375 - Fix some issues in the code for parsing and printing options.
1376 [ISC-Bugs #22625] - properly print options that have several fields
1377 followed by an array of something for example "fIa"
1378 [ISC-Bugs #27289] - properly parse options in declarations that have
1379 several fields followed by an array of something for example "fIa"
1380 [ISC-Bugs #27296] - properly determine if we parsed a 16 or 32 bit
1381 value in evaluate_numeric_expression (extract-int).
1382 [ISC-Bugs #27314] - properly parse a zero length option from
1383 a lease file. Thanks to Marius Tomaschewski from SUSE for the report
1384 and prototype patch for this ticket as well as ticket 27289.
1386 ! Previously the server code was relaxed to allow packets with zero
1387 length client ids to be processed. Under some situations use of
1388 zero length client ids can cause the server to go into an infinite
1389 loop. As such ids are not valid according to RFC 2132 section 9.14
1390 the server no longer accepts them. Client ids with a length of 1
1391 are also invalid but the server still accepts them in order to
1392 minimize disruption. The restriction will likely be tightened in
1393 the future to disallow ids with a length of 1.
1394 Thanks to Markus Hietava of Codenomicon CROSS project for the
1395 finding this issue and CERT-FI for vulnerability coordination.
1399 ! When attempting to convert a DUID from a client id option
1400 into a hardware address handle unexpected client ids properly.
1401 Thanks to Markus Hietava of Codenomicon CROSS project for the
1402 finding this issue and CERT-FI for vulnerability coordination.
1406 ! A pair of memory leaks were found and fixed. Thanks to
1407 Glen Eustace of Massey University, New Zealand for finding
1412 - Existing legacy unit-tests have been migrated to Automated Test
1413 Framework (ATF). Several new tests have been developed. To enable
1414 unit-tests, please use --with-atf in configure script. A Developer's
1415 Guide has been added. To generate it, please use make devel in
1416 the doc directory. It is currently in early stages of development,
1417 but is expected to grow in the near future. [ISC-Bugs 25901]
1419 ! An issue with the use of lease times was found and fixed. Making
1420 certain changes to the end time of an IPv6 lease could cause the
1421 server to abort. Thanks to Glen Eustace of Massey University,
1422 New Zealand for finding this issue.
1426 - Update the memory leakage debug code to work with v6.
1429 - Relax the requirements for deleting an A or AAAA record.
1430 Previously the DDNS removal code required both the A or AAAA
1431 record and the TXT record to exist. This requirement could
1432 cause problems if something interrupted the removal leaving
1433 the TXT record alone. This relaxation was codified in RFC 4703.
1436 - Modify the failover code to handle incorrect peer names
1437 better. Previously the structure holding the name might
1438 have been freed inappropriately in some cases and not
1439 freed in other cases.
1442 - Add a configure option, enable-secs-byteorder, to deal with
1443 clients that do the byte ordering on the secs field incorrectly.
1444 This field should be in network byte order but some clients
1445 get it wrong. When this option is enabled the server will examine
1446 the secs field and if it looks wrong (high byte non zero and low
1447 byte zero) swap the bytes. The default is disabled. This option
1448 is only useful when doing load balancing within failover.
1451 - Fix a set of issues that were discovered via a code inspection
1452 tool. Thanks to Jiri Popelka and Tomas Hozza Red Hat for the logs
1456 - Parsing unquoted base64 strings improved. Parser now properly handles
1457 strings that contain reserved names. [ISC-Bugs #23048]
1459 - Modify the nak_lease function to make some attempts to find a
1460 server-identifier option to use for the NAK.
1463 - The client now passes information about the options it requested
1464 from the server to the script code via environment variables.
1465 These variables are of the form requested_<option_name>=1 with
1466 the option name being the same as used in the new_* and old_*
1470 - Add support for a simple check that the server id in a request message
1471 to a failover peer matches the server id of the server. This support
1472 is enabled by editing the file includes/site.h and uncommenting the
1473 definition for SERVER_ID_CHECK. The option has several restrictions
1474 and issues - please read the comment in the site.h file before
1478 - Tidy up some compiler issues in the debug code.
1481 - Move the dhcpd.conf example file to dhcpd.conf.example to avoid
1482 overwriting the dhcpd.conf file when installing a new version of
1483 ISC DHCP. The user will now need to manual copy and edit the
1484 dhcpd.conf file as desired.
1487 - Check the status value when trying to read from a connection to
1488 see if it may have been closed. If it appears closed don't try
1489 to read from it again. This avoids a potential busy-wait like
1490 loop when the peer names are mismatched.
1493 - Remove an unused variable to keep compilers happy.
1496 - Modify test makefiles to be more similar to standard makefiles
1497 and comment out a currently unused test.
1500 - Address static analysis warnings.
1501 [ISC-Bugs #33510] [ISC-Bugs #33511]
1503 - Silence benign static analysis warnings.
1506 - Add check for 64-bit package for atf.
1509 - Use newer auto* tool packages and turn on RFC_3542 support on Mac OS.
1512 - Remove a variable when it isn't being used due to #ifdefs to avoid
1513 a compiler warning on Solaris using GCC.
1516 - Add a check for too much whitespace in a config or lease file.
1517 Thanks to Paolo Pellegrino for finding the issue and a suggestion
1521 - Fix several problems with using OMAPI to manipulate class and subclass
1525 - Added a sleep call after killing the old client to allow time
1526 for the sockets to be cleaned. This should allow the -r option
1527 to work more consistently.
1530 - Missing files for ISC DHCP Developer's Guide are now included in
1531 the release tarballs. To generate this documentation, please use
1532 make devel command in doc directory. [ISC-Bugs #32767]
1534 - Update client script for use with openwrt.
1537 - Fix the socket handling for DHCPv6 clients to allow multiple instances
1538 of a client on a single machine to work properly. Previously only
1539 one client would receive the packets. Thanks to Jiri Popelka at Red Hat
1540 for the bug report and a potential patch.
1543 - Added support for gentle shutdown after signal is received.
1544 [ISC-Bugs #32692] [ISC-Bugs 34945]
1546 - Enhance the DHCPv6 server logging to include the addresses that are assigned
1550 - Fix an operation in the DDNS code to be a bitwise instead of logical or.
1554 Changes since 4.1.0 (new features)
1556 - Failover port configuration can now be left to defaults (port 647) as
1557 described in the -12 revision of the Failover draft (and assigned by
1558 IANA). Thanks in part to a patch from David Cantrell at Red Hat.
1560 - If configured, dhclient may now transmit to an anycast MAC address,
1561 rather than using a broadcast address. Thanks to a patch from David
1562 Cantrell at Red Hat.
1564 - Added client support for setting interface MTU and metric, thanks to
1565 Roy "UberLord" Marples <roy@marples.name>.
1567 - Added client -D option to specify DUID type to send.
1569 - A new failover configuration parameter has been introduced for those
1570 environments where DHCP servers can be reasonably guaranteed to be
1571 "down" when the failover TCP socket is severed, "auto-partner-down".
1572 This parameter is not generally safe, and by default is disabled, so
1573 please carefully review the documentation of this parameter in the
1574 dhcpd.conf(5) manpage before determining to use it yourself.
1576 - Added a configuration function, 'gethostname()', which calls the system
1577 function of the same name and presents the results as a data expression.
1578 This function can be used to incorporate the system level hostname of
1579 the system the DHCP software is operating on in responses or queries (such
1580 as including a failover partner's hostname in a dhcp message or binding
1581 scope, or having a DHCP client send any system hostname in the host-name or
1582 FQDN options by default).
1584 - The dhcp-renewal-time and dhcp-rebinding-time options may now be configured
1585 for DHCPv4 operation and used independently of the dhcp-lease-time
1586 calculations. Invalid renew and rebinding times (e.g., greater than the
1587 determined lease time) are omitted.
1589 - Processing the DHCP to DNS server transactions in an asynchronous fashion,
1590 the DHCP server or client can now continue with its processing while
1591 awaiting replies from the DNS server.
1593 - The 'hardware [ethernet|etc] ...;' parameter in host records has been
1594 extended to attempt to match DHCPv6 clients by the last octets of a
1595 DUID-LL or DUID-LLT provided by the client.
1597 Changes since 4.1.0 (bug fixes)
1599 - Remove infinite loop in token_print_indent_concat().
1601 - Validate the argument to the -p option.
1603 - The notorious 'option <unknown> ... larger than buffer' log line,
1604 which is seen in some malformed DHCP client packets, was modified.
1605 It now logs the universe name, and does not log the length values
1606 (which are bogus corruption read from the packet anyway). It also
1607 carries a hopefully more useful explanation.
1609 - Suppress spurious warnings from configure about --datarootdir
1611 - A bug was fixed that caused the server not to answer some valid Solicit
1612 and Request packets, if the dynamic range covering any requested addresses
1613 had been deleted from configuration.
1615 - Update the code to deal with GCC 4.3. This included two sets of changes.
1616 The first is to the configuration files to include the use of
1617 AC_USE_SYSTEM_EXTENSIONS. The second is to deal with return values that
1620 - The db-time-format option was documented in manpages.
1622 - Using reserved leases no longer results in 'lease with binding state
1623 free not on its queue' error messages, thanks to a patch from Frode
1626 - Fix a build error in dhcrelay, using older versions of gcc with
1629 - Two uninitialized stack structures are now memset to zero, thanks to a
1630 patch from David Cantrell at Red Hat.
1632 - Fixed a cosmetic bug where pretty-printing valid domain-search options would
1633 result in an erroneous error log message ('garbage in format string').
1635 - A bug in DLPI packet transmission (Solaris, HP/UX) that caused the server
1636 to stop receiving packets is fixed. The same fix also means that the MAC
1637 address will no longer appear 'bogus' on DLPI-based systems.
1639 - A bug in select handling was discovered where the results of one select()
1640 call were discarded, causing the server to process the next select() call
1641 and use more system calls than required. This has been repaired - the
1642 sockets will be handled after the first return from select(), resulting in
1645 - The update-conflict-detection feature would leave an FQDN updated without
1646 a DHCID (still currently implemented as a TXT RR). This would cause later
1647 expiration or release events to fail to remove the domain name. The feature
1648 now also inserts the client's up to date DHCID record, so records may safely
1649 be removed at expiration or release time. Thanks to a patch submitted by
1652 - Memory leak in the load_balance_mine() function is fixed. This would
1653 leak ~20-30 octets per DHCPDISCOVER packet while failover was in use
1654 and in normal state.
1656 - Various compilation fixes have been included for the memory related
1657 DEBUG #defines in includes/site.h.
1659 - Fixed Linux client script 'unary operator expected' errors with DHCPv6.
1661 - Fixed setting hostname in Linux hosts that require hostname argument
1662 to be double-quoted. Also allow server-provided hostname to
1663 override hostnames 'localhost' and '(none)'.
1665 - Fixed failover reconnection retry code to continue to retry to reconnect
1666 rather than restarting the listener.
1668 - Compilation on Solaris with USE_SOCKETS defined in includes/site.h has
1669 been repaired. Other USE_ overrides should work better.
1671 - A check for the local flavor of IFNAMSIZ had a broken 'else' condition,
1672 that probably still resulted in the correct behaviour (but wouldn't use
1673 a larger defined value provided by the host OS).
1675 - Fixed a bug where an OMAPI socket disconnection message would not result
1676 in scheduling a failover reconnection, if the link had not negotiated a
1677 failover connect yet (e.g.: connection refused, asynch socket connect()
1680 - A bug was fixed that caused the 'conflict-done' state to fail to be parsed
1681 in failover state records.
1683 ! A stack overflow vulnerability was fixed in dhclient that could allow
1684 remote attackers to execute arbitrary commands as root on the system,
1685 or simply terminate the client, by providing an over-long subnet-mask
1686 option. CERT VU#410676 - CVE-2009-0692
1688 - Fixed a bug where relay agent options would never be returned when
1689 processing a DHCPINFORM.
1691 - Versions 3.0.x syntax with multiple name->code option definitions is now
1692 supported. Note that, similarly to 3.0.x, for by-code lookups only the
1693 last option definition is used.
1695 - Fixed a bug where a time difference of greater than 60 seconds between a
1696 failover pair could cause the primary to crash on contact with the
1697 secondary. Thanks to a patch from Steinar Haug.
1699 - Don't look for IPv6 interfaces on Linux when running in DHCPv4 mode.
1700 Thanks to patches from Matthew Newton and David Cantrell.
1702 - Secondary servers in a failover pair will now perform ddns removals if
1703 they had performed ddns updates on a lease that is expiring, or was
1704 released through the primary. As part of the same fix, stale binding scopes
1705 will now be removed if a change in identity of a lease's active client is
1706 detected, rather than simply if a lease is noticed to have expired (which it
1707 may have expired without a failover server noticing in some situations).
1709 - A patch supplied by David Cantrell at RedHat was applied that detects
1710 invalid calling parameters given to the ns_name_ntop() function.
1711 Specifically, it detects if the caller passed a pointer and size pair
1712 that causes the pointer to integer-wrap past zero.
1714 ! Fixed a fenceposting bug when a client had two host records configured,
1715 one using 'uid' and the other using 'hardware ethernet'. CVE-2009-1892
1717 - Fixed the check in the dhcp_interface_signal_handler routine to verify
1718 the existence of the linked signal handler before calling it.
1720 - Both host and subnet6 configuration groups are now included whether a
1721 fixed-address6 (DHCPv6) is in use or not. Host scoped configuration takes
1722 precedence. This fixes two bugs, one where host scoped configuration
1723 would not be included from a non-fixed-address6 host record, and the equal
1724 and opposite bug where subnet6 scoped configuration would not be used when
1725 over-riding values were not present in a matching fixed-address6 host
1728 - ./configure now checks to ensure the intX_t and u_intX_t types are defined,
1729 correcting a compilation failure when using Sun's compiler.
1731 - Modified the handling of a connection to avoid releasing the omapi io
1732 object for the connection while it is still in use. One symptom from
1733 this error was a segfault when a failover secondary attempted to connect
1734 to the failover primary if their clocks were not synchronized.
1736 - Clean up to allow compilation with gcc 2.95.4 on FreeBSD. Remove an
1737 extra semi-colon from common/dns.c and moved setting a variable to NULL
1738 in server/dhcpv6.c to allow the compiler to decide that the variable
1739 was always properly set.
1741 Changes since 4.1.0b1
1743 - A missing "else" in dhcrelay.c could have caused an interface not to
1746 Changes since 4.1.0a2
1748 - A cosmetic bug in DHCPDECLINE processing was fixed which caused all
1749 successful DHCPDECLINEs to be logged as "not found" rather than
1752 - Added configuration file examples for DHCPv6.
1754 - Some failover debugging #defines have been better defined and some
1755 high frequency messages moved to a deeper debugging symbol.
1757 - The CLTT parameter in failover is now only updated by client activity,
1758 and not by failover binding updates (taking on the peer's CLTT).
1760 - Failover BNDUPD messages are now discarded if they conflict with an
1761 update that has been transmitted, but not acknowledged.
1763 - A bug cleaning up unknown-xxx temporary option definitions was fixed.
1765 - Delayed-ack is now a compile-time option, compiled out by default.
1766 This feature is simply too experimental for right now, and causes
1767 some problems to some failover installations. We will revisit this
1770 - The !inet_pton() call in res_mkupdrec was adjusted to '<= 0' as
1771 inet_pton returns either 1, 0, or -1.
1773 - A dhclient-script for MacOS X has been included, which enables
1774 'dhclient -6' support.
1776 - DDNS removal routines were updated so that the DHCID is not removed until
1777 the client has been deprived of all A and AAAA records (not only the last
1778 one of either of those). This resolves a bug where dual stack clients
1779 would not be able to regain their names after either expiration event.
1781 Changes since 4.1.0a1
1783 - Corrected list of failover state values in dhcpd man page.
1785 - Fixed a bug that caused some request types to be logged incorrectly.
1787 - Clients that sent a parameter request list containing the
1788 routers option before the subnet mask option were receiving
1789 only the latter. Fixed.
1791 - The server wasn't always sending the FQDN option when it should.
1793 - A partner-down failover server no longer emits 'peer holds all free leases'
1794 if it is able to newly-allocate one of the peer's leases.
1796 - Fixed a coredump when adding a class via OMAPI.
1798 - Check whether files are zero length before trying to parse them.
1800 - Ari Edelkind's PARANOIA patch has been included and may be compiled in
1801 via two ./configure parameters, --enable-paranoia and
1802 --enable-early-chroot.
1804 - ./configure was extended to cover many optional build features, such
1805 as failover, server tracing, debugging, and the execute() command.
1807 - There is now a default 1/4 of a second scheduled delay between delayed
1808 fsync()'s, it can be configured by the max-ack-delay configuration
1811 - A bug was fixed where the length of a hostname was miscalculated, so that
1812 hosts were given odd-looking domain names ("foo.bar.ba.example.com").
1814 - Shared network selection should be done from the innermost relay
1815 valid link-address field, rather than the outermost.
1817 - Prefix pools are attached to shared network scopes.
1819 - Merged IA_XX related structures.
1821 - Add DHCPv6 files in configure.
1823 - A memory leak when using omapi has been fixed.
1825 - DHCPv6 vendor-class options (VSIO) are now only sent when they appear
1826 on the DHCPv6 ORO. This resolves a bug where VSIO options were placed
1827 in IA_NA encapsulated options fields.
1829 - Integrated client with stateless, temporary address and prefix delegation
1832 - A double-dereference in dhclient transmission of DHCPDECLINEs was
1835 - Fix handling of format code 'Z'.
1837 - Support "-1" argument in DHCPv6.
1839 - Merge DHCPv6-only "dhcrelay6" into general-purpose "dhcrelay" (use
1840 "-6" option to select DHCPv6 mode).
1842 - Fix handling of -A and -a flags in dhcrelay; it was failing to expand
1843 packet size as needed to add relay agent options.
1845 - A bug in subnet6 parsing where options contained in subnet6 clauses would
1846 not be applied to clients addressed within that network was repaired.
1848 - When configuring a "subnet {}" or "subnet6 {}" without an explicit
1849 shared-network enclosing it, the DHCP software would synthesize a
1850 shared-network to contain the subnet. However, all configuration
1851 parameters within the subnet more intuitively belong "to any client
1852 on that interface", or rather the synthesized shared-network. So,
1853 when a shared-network is synthesized, it is used to contain the
1854 configuration present inside the subnet {} clause. This means that
1855 the configuration will be valid for all clients on that network, not
1856 just those addressed out of the stated subnet. If you intended the
1857 opposite, the workaround is to explicitly configure an empty
1860 - A bug was fixed where Information-Request processing was not sourcing
1861 configured option values.
1863 - A warning was added since the DHCPv6 processing software does not yet
1864 support class statements.
1866 - Compilation warnings on GCC 4.3 relating to bootp source address
1867 selection were repaired.
1869 - The v6 BSD socket method was updated to use a single UDP BSD socket
1870 no matter how many interfaces are involved, differentiating the
1871 interfaces the packets were received on by the interface index supplied
1874 - The relay agent no longer listens to the All DHCP Servers Multicast
1877 - A bug was fixed in data_string_sprintfa() where va_start was only called
1878 once for two invocations of vsprintf() variants.
1880 - ERO (RFC 4994) server support.
1882 - Basic and partial DHCPv6 leasequery support.
1884 - Reliable DHCPv6 release (previous behavior, send release and exit, is
1885 still available with dhclient -6 -1 -r).
1887 Changes since 4.0.0 (new features)
1889 - Added DHCPv6 rapid commit support.
1891 - Added explicit parser support for zero-length DHCP options, such as
1892 rapid-commit, via format code 'Z'.
1894 - It's now possible to update the "ends" field of a lease with OMAPI.
1895 This is useful if you want not only to release a lease, but also make
1896 it available for reuse right away. Hat tip to Christof Chen.
1898 - Fixed definition of the iaaddr hash functions to use the correct
1899 functions when referencing and dereferencing memory.
1901 - Some definitions not in phase with the IANA registry were updated.
1903 - Allocated interface IDs are better controlled ('u' bit set to zero,
1904 reserved IDs avoided).
1906 - Unicast options are taken into account only for RENEWs.
1908 - NoAddrsAvail answers to SOLICITs are always ADVERTISEs even when a SOLICIT
1909 carries a rapid-commit option.
1911 - Return in place of raise an impossible condition when one tries to release
1912 an empty active lease.
1914 - Timer granularity is now 1/100s in the DHCPv6 client.
1916 - The dhclient-script was updated to create a host route for the default
1917 gateway if the supplied subnet mask for an IPv4 address was a /32. This
1918 allows the client to work in 'captive' network environments, where the
1919 operator does not want clients to crosstalk directly.
1921 - MINUS tokens should be parsable again.
1923 - Multiple (up to "delayed-ack x;" maximum) DHCPv4 packets are now queued and
1924 released in bursts after single fsync() events when the upper limit is
1925 reached or if the receiving sockets go dry. The practical upshot is
1926 that fsync-coupled server performance is now multiplicitively increased.
1927 The default delayed ack limit is 28. Thanks entirely to a patch from
1930 Changes since 4.0.0 (bug fixes)
1932 - DHCP now builds on AIX.
1934 - Exit with warning when DHCPv6-specific statements are used in the
1935 config file but -6 is not specified.
1937 - Fixed "--version" flag in dhcrelay
1939 - The 'min-secs' configuration parameter's log message has been updated to
1942 - The warning logged when an address range doesn't fit in the subnets
1943 they were declared has been updated to be more helpful and identify the
1944 typo in configuration that created the spanning addresses.
1946 - A bug in failover pool rebalancing that caused POOLREQ message ping-pongs
1949 - A flaw in failover pool rebalancing that could cause POOLREQ messages to
1950 be sent outside of the min-balance/max-balance scheduled intervals has
1953 - A cosmetic bug during potential-conflict recovery that caused the peer's
1954 'conflict-done' state message to be logged as 'unknown-state' has been
1955 repaired. It is now logged correctly.
1957 - A bug was fixed where the 'giaddr' may be used to find the client's subnet
1958 rather than its own 'ciaddr'.
1960 - A log message was introduced to clarify the situation where a failover
1961 'address' parameter (the server's local address) did not resolve to an
1964 - The minimum site code value was set to 224 in 3.1.0 to track RFC3942. This
1965 broke a lot of legacy site local configurations. The new code in place will
1966 track site local space minimum option codes and logs a warning to encourage
1967 updates and exploration of site local code migration problems. Option
1968 codes less than 128 in site local spaces remain inaccessible.
1970 - A possible relay agent option bug was repaired where random server
1971 initialization state may have been used to signal the relay agent
1972 information options sub-option code for the 'END' of the option space.
1974 - Fixes to allow code to compile and run on Solaris 9.
1976 - Fixes to allow code to compile on Mac OS X Leopard (10.5).
1978 - When server is configured with options that it overrides, a warning is
1979 issued when the configuration file is read, rather than at the time the
1980 option is overridden. This was important, because the warning was given
1981 every time the option was overridden, which could create a lot of
1982 unnecessary logging.
1984 - Fixed a compilation problems on platforms that define a value for FDDI,
1985 which conflicts with a dhcp configuration syntax token by the same name.
1987 - When a failover server suspects it has encountered a peer running a
1988 version 3.0.x failover server, a warning that the failover wire protocol
1989 is incompatible is printed.
1991 - The failover server no longer issues a floating point error if it encounters
1992 a previously undefined option code.
1994 - Fix startup error messages to report a missing "subnet6 declaration", rather
1995 than a missing "subnet declaration", when running as a DHCPv6 server.
1997 - DHCPv6 client timestamp in DUID was based on the year 1970 rather
2000 - Warn when attempting to use a hardware parameter in DHCPv6.
2002 - DHCPv6 released resources are now marked as released by the client.
2004 - 'Soft' bindings have no more side-effects.
2006 Changes since 4.0.0b3
2008 - The reverse dns name for PTR updates on IPv6 addresses has been fixed to
2009 use ip6.arpa. rather than default to in-addr.arpa and require user
2012 - dhc6_lease_destroy() and dhc6_ia_destroy() now set lease and IA pointers
2013 to NULL after freeing, to prevent subsequent accesses to freed memory.
2015 - The DHCPv6 server would not send the preference option unless the
2016 client requested it, via the ORO. This has been fixed, so the DHCPv6
2017 server will always send the preference value if it is configured.
2019 - When addresses were passed as hints to the server in an IA, they were
2020 incorrectly handled, sometimes being treated as an error. Now the
2021 server will treat these as hints and ignore them if it cannot supply
2022 a requested address.
2024 - If the client had multiple addresses, and one expired (was not renewed
2025 by the server), the client would continue to attempt to renew the same
2026 old address over and over. Now, the client will omit any expired
2027 addresses from future Confirm, Renew, or Rebind messages.
2029 - dhclient -6 will now select renew/rebind timers based upon the longest
2030 address expiration time rather than the shortest expiration time, in
2031 order to avoid cascading renewals in the event a server elects not to
2032 extend one of multiple IAADDR leases.
2034 - The server now limits clients that request multiple addresses to one
2035 address per IA by default, which can be adjusted through the
2036 "limit-addrs-per-ia" configuration option.
2038 - The DHCPv6 client now issues fresh transaction IDs on Renew and Rebind
2039 message exchanges, rather than using the most recent ID.
2041 - The DHCPv6 server now replies to Information-Request messages.
2043 - A bug was fixed in the dhclient-script for BSDs to correctly carry error
2044 codes through some conditions.
2046 - The parsing of some options in the dhclient lease file, in particular
2047 the success DHCPv6 status-code, was fixed.
2049 - A bug was fixed that caused the DHCPv6 ORO option to be corrupted with
2050 seemingly random values.
2052 - A reference overleak in DHCPv6 shared network processing was repaired.
2054 - ./configure now autodetects local database locations rather than trying
2055 to put dhcpd.leases and dhclient.leases in /usr/local/var/db, which no
2058 - Regression fix for bug where server advertised a IPv6 address in
2059 response to a SOLICIT but would not return the address in response
2062 - A bug was fixed where the DHCPv6 server puts the NoAddrsAvail status
2063 code in the IA_NA was fixed. The status code now appears in the root
2066 Changes since 4.0.0b2
2068 - Clarified error message when lease limit exceeded
2070 - Relative time may now be used as a qualifier for 'allow' and 'deny' access
2071 control lists. These directives may be used to assist in re-addressing
2072 address pools without having to constantly reconfigure the server. Please
2073 see 'man dhcpd.conf' for more information on allow/deny 'after time' syntax.
2074 Thanks to a patch from Christof Chen.
2076 - The server will now include multiple IA_NA's and multiple IAADDRs within
2077 them, if advertised by the client. It still only seeks to allocate one
2080 Changes since 4.0.0b1
2082 - Use different paths for PID and lease files when running in DHCPv4
2083 or DHCPv6 mode, so that servers for both protocols can be run
2084 simultaneously on a single interface.
2086 - Fixed a buffer overflow error which could have allowed a denial
2087 of service under unusual server configurations
2089 - Eliminated a spurious error message from the client
2091 - A number of bugs with the internal handling of lease state on the
2092 server have been fixed. Some of these could cause server crashes.
2094 - The peer_wants_leases() changes pulled up from 3.1.0 were corrected,
2095 'never used' leases will no longer consistently shift between servers
2096 on every pool rebalance run.
2098 - sendmsg()/recvmsg() control buffers are now declared in such a way to
2099 ensure they are correctly aligned on all (esp. 64-bit) architectures.
2101 - The client leasing subsystem was streamlined and corrected to account
2102 more closely for changes in client link attachment selection.
2104 Changes since 4.0.0a3
2106 - The DHCP server no longer requires a "ddns-update-style" statement,
2107 and now defaults to "none", which means DNS updates are disabled.
2109 - Log messages when failover peer names mismatch have been improved to
2110 point out the problem.
2112 - Bug where server advertised a IPv6 address in response to a SOLICIT
2113 but would not return the address in response to a REQUEST. Thanks to
2114 Dennis Kou for finding the bug.
2116 - Fixed an error causing the server to lock up on lease expiration,
2117 reported independently by Jothilingam Vasu and Dennis Kou.
2119 - Fixed a ./configure bug where compile tests were failing due to
2120 "-Werror" (unused variable) rather than the actual test failure. Lead
2121 to inconsistent and unworkable auto-configurations.
2123 - Compilation with DLPI and -Werror has been repaired.
2125 - Error in decoding IA_NA option if multiple interfaces are present
2126 fixed by Marcus Goller.
2128 - DHCPv6 server Confirm message processing has been enhanced - it no
2129 longer replies only to clients with host {} records, it now replies
2130 as directed in RFC3315 section 18.2.2 - that is, to all clients
2131 regardless of the existence of bindings.
2133 - A core dump during expired lease cleanup has been repaired.
2135 - DDNS updates state information are now stored in 'binding scopes' that
2136 follow the leases through their lifecycles. This enables DDNS teardowns
2137 on leases that are assigned and expired inbetween a server restart (the
2138 state is recovered from dhcpd.leases). Arbitrary user-specified binding
2139 scopes ('set var = "value";') are not yet supported.
2141 - Additional compilation problems on HP/UX have been repaired.
2143 Changes since 4.0.0a2
2145 - Fix for startup where there are no IPv4 addresses on an interface.
2146 Thanks to Marcus Goller for reporting the bug.
2148 - Fixed file descriptor leak on listen failure. Thanks to Tom Clark.
2150 - Bug in server configuration parser caused server to get stuck on
2151 startup for certain bad pool declarations. Thanks to Guillaume
2152 Knispel for the bug report and fix.
2154 - Code cleaned to remove warnings reported by "gcc -Wall".
2156 - DHCPv6 is now the default. You can disable DHCPv6 support using the
2157 "--disable-dhcpv6" flag when you run the configure script.
2159 - An internal database inconsistency bug was repaired where the server
2160 would segfault if a client attempted to renew a lease that had been
2161 loaded from persistent storage.
2163 - 'request' and 'also request' syntaxes have been added to accommodate
2164 the DHCPv6 client configuration. 'send dhcp6.oro' is no longer
2167 - Bug fixed where configuration file parsing did not work with
2168 zero-length options; this made it impossible to set the
2169 rapid-commit option.
2171 - Bogus messages about host records with IPv4 fixed-addresses being of
2172 non-128-bits in length were removed.
2174 Changes since 4.0.0a1
2176 - Bug in octal parsing fixed. Thanks to Bernd Fuhrmann for the report
2179 - Autoconf now supplies proper flags for Solaris DHCPv6 builds.
2181 - Fix for parsing error on some IPv6 addresses.
2183 - Invalid CIDR representation for IPv6 subnets or ranges now checked
2184 for when loading configuration.
2186 - Compilation on HP/UX has been repaired. The changes should generally
2187 apply to any architecture that supplies SIOCGLIFCONF but does not
2188 use 'struct lifconf' structures to pass values.
2190 - Two new operators, ~= and ~~, have been integrated to implement
2191 boolean matches by regular expression (such as may be used in
2192 class matching statements). Thanks to a patch by Alexandr S.
2193 Agranovsky, which underwent slight modification.
2195 - Fix for icmp packets on 64-bit systems (bug introduced in 4.0).
2197 - A bug was fixed in interface discovery wherein an error identifying
2198 a server-configured interface with no IPv4 addresses would SEGV.
2200 - Fixed a bug in which write_lease() might report a failure incorrectly
2202 - Added support for DHCPv6 Release messages
2204 - Added -x option to dhclient, which triggers dhclient processes
2205 to exit gracefully without releasing leases first
2207 - All binaries (client, server, relay) now change directories
2208 to / before going into daemon mode, so as not to hold $CWD open
2210 - Fixed a bug parsing DHCPv6 client-id's in host-identifier statements
2212 - Fixed a bug with the 'ddns-updates' boolean server configuration
2213 parameter, which caused the server to fail.
2215 Changes since 4.0.0-20070413
2217 - Old (expired) leases are now cleaned.
2219 - IPv6 subnets now have support for arbitrary allocation ranges via
2220 a new 'range6' configuration directive.
2222 - An obviated option code hash lookup to find D6O_CLIENTID was removed.
2224 - Corrected some situations where variables might be used without being
2227 - Silenced several other compiler warnings.
2229 - Include the more standard sys/uio.h rather than rely upon other
2230 header files to include it (fixes a BSD 4.2 compile failure).
2232 - Duplicate dhclient-script updates for DHCPv6 to all provided scripts.
2234 - DHCPv4 I/O methods that failed to sense hardware address were corrected.
2236 - DHCPv4 is now the default (as documented) rather than DHCPv6. The default
2237 was set to DHCPv6 to facilitate ease early development, and forgotten.
2239 - Corrected a segmentation violation in DHCPv4 socket processing.
2241 - dhclient will now fork() into the background once it binds to an
2242 IPv6 address, or immediately if the -n flag is supplied.
2244 - -q is now the default behaviour on dhclient, with -d or -v enabling
2245 non-quiet (stderr logging) mode.
2247 - Fix documentation of the domain-search atom (quoted, with commas).
2249 - Document DHCPv6 options presently in the default table.
2251 - Replaced ./configure shellscripting with GNU Autoconf.
2253 Changes since 3.1.0 (NEW FEATURES)
2255 - DHCPv6 Client and Server protocol support. Use '-6' to run the daemons
2256 as v6-only. Use '-4' to run the daemons as v4-only (default. There is
2257 no support currently for both.
2259 - Server support for multiple IA_NA options, containing at most one
2262 - Client support for one IA_NA option, containing any number of IAADDR
2265 - Server support for the DHCPv6 Information-request message.
2267 - Inappropriate unicast DHCPv6 messages sent to the server are now
2268 discarded, and this has rearchitected the IO system slightly.
2270 - The DHCPv6 server DUID defaults to type 1, is persistently stored in
2271 the leases database, and can be over-ridden (either completely, or by
2272 specifying type 1 or type 2).
2274 - The server only uses Rapid-Commit if it has been configured with the
2275 Rapid-Commit option and the client requests it.
2277 - DDNS support. We now update AAAA records in the same place we would
2278 update A records, if we have an IPv6 address. We also generate IP6.ARPA
2279 style names for PTR records if we're dealing with an IPv6 address. Both
2280 A and AAAA updates are done using the same 'fqdn.' virtual option space
2281 (although the DHCPv4 FQDN and DHCPv6 FQDN options are formatted
2282 differently, they both use the same code here).
2284 - The Linux dhclient-script attempts to set and remove assigned addresses,
2285 and to configure /etc/resolv.conf from nameserver and domain name
2286 configurations. It can be extended to configure other parameters.
2288 - Initial DHCPv6 lease support.
2290 - The IO system now tracks all local IP addresses, so that the DHCP
2291 applications (particularly the dhcrelay) can discern between what frames
2292 were transmitted to it, and what frames are being carried through it which
2293 it should not intercept.
2295 Changes since 3.1.0 (Maintenance)
2297 - A bug was repaired where MAC Address Affinity for virgin leases always
2298 mapped to the primary. Virgin leases now have an interleaved preference
2299 between primary and secondary.
2301 - A bug was repaired where MAC Address Affinity for clients with no client
2302 identifier was sometimes mishashed to the peer. Load balancing during
2303 runtime and pool rebalancing were opposing.
2305 - An assertion in lease counting relating to reserved leases was repaired.
2307 - The subnet-mask option inclusion now conforms with RFC2132 section 3.3;
2308 it will only appear prior to the routers option if it is present on the
2309 Parameter-Request-List. The subnet-mask option will also only be
2310 included by default (if it is not on the PRL) in response to DISCOVER
2311 or REQUEST messages.
2313 - The FQDN option is only supplied if the client supplied an FQDN option or
2314 if the FQDN option was explicitly requested on the PRL.
2316 - Dynamic BOOTP leases are now load balanced in failover.
2318 Changes since 3.1.0rc1
2320 - The parse warning that 'deny dynamic bootp;' must be configured for
2321 failover protected subnets was removed.
2323 Changes since 3.1.0b2
2325 - Failover rebalance events no longer play ping pong with round errors
2326 (moving leases between free and back to backup where there are an
2327 odd number of leases).
2329 - The 'pool' log line has been split into two messages, one before the
2330 rebalance run, and one after.
2332 - Any queued BNDACKs are transmitted before transmitting new BNDUPDs.
2333 This enforces the correct sequence of events for the remote server
2334 processing these messages.
2336 Changes since 3.1.0b1
2338 - Fixed a bug that caused OMAPI clients to freeze when opening lease
2341 - A new server config option "fqdn-reply" specifies whether the server
2342 should send out option 81 (FQDN). Defaults to "on". If set to "off",
2343 the FQDN option is not sent, even if the client requested it. This is
2344 needed because some clients misbehave otherwise. Thanks to Christof Chen
2347 - Allow trace output files (-tf option) to be overwritten, rather than
2348 crashing dhcpd if the file already exists
2350 - A bug was fixed that caused dhcpd to segfault if a pool was declared
2351 outside the scope of a subnet in dhcpd.conf.
2353 - Some uninitialized values were repaired in dhcpleasequery.c that
2354 caused the server to abort.
2356 - A new server config option, 'do-reverse-updates', has been added
2357 which causes the server to abstain from performing updates on PTR
2358 records. Thanks to a patch from Christof Chen at Allianz.
2360 - A bug was repaired in subencapsulation support, where spaces separated
2361 by empty spaces would not get included.
2363 - A bug in dhclient was repaired which caused it to send parameter request
2364 lists of 55 bytes in length no matter how long the declared PRL was.
2366 - 'dhcp.c(3953): non-null pointer' has been repaired. This fixes a flaw
2367 wherein the DHCPv4 server may ignore a configured server-identifier.
2369 - A flaw in failover startup sequences was repaired that sometimes left
2370 the primary DHCP server's pool rebalance schedules unscheduled.
2372 - Corrected a flaw that broke encapsulated spaces included due to presence
2373 on the parameter request list.
2375 Changes since 3.1.0a3
2377 - Some spelling fixes.
2379 Changes since 3.1.0a2
2381 - A bug was fixed where attempting to permit leasequeries results in a
2382 fatal internal error, "Unable to find server option 49".
2384 - A bug was fixed in dhclient rendering the textual output form of the
2385 domain-search option syntax.
2387 Changes since 3.1.0a1
2389 - A bug in the FQDN universe that added FQDN codes to the NWIP universe's
2390 hash table was repaired.
2392 - The servers now try harder to transmit pending binding updates when
2393 entering normal state.
2395 - UPDREQ/UPDREQALL handling was optimized - it no longer dequeues and
2396 requeues all pending updates. This should reduce the number of spurious
2397 'xid mismatch' log messages.
2399 - An option definition referencing leak was fixed, which resulted in early
2400 termination of dhclient upon the renewal event.
2402 - Some default hash table sizes were tweaked, some upwards, some downwards.
2403 3.1.0a1's tables resulted in a reduction in default server memory use.
2404 The new selected values provide more of a zero sum (increasing the size
2405 of tables likely to be populated, decreasing the size of tables unlikely).
2407 - Lease structures appear in three separate hashes: by IP address, by UID,
2408 and by hardware address. One type of table was used for all three, and
2409 improvements to IP address hashing were applied to all three (so UID and
2410 hardware addresses were treated like 4-byte integers). There are now two
2411 types of tables, and the uid/hw hashes use functions more appropriate
2414 - The max-lease-misbalance percentage no longer causes scheduled rebalance
2415 runs to be skipped: it still governs the schedule, but every scheduled
2416 run will attempt balance.
2418 - A segfault bug in recursive encapsulation support has been corrected.
2420 Changes since 3.0 (New Features)
2422 - A workaround for certain STSN servers that send a mangled domain-name
2423 option was introduced for dhclient. The client will now accept corrupted
2424 server responses, if they contain a valid DHCP_MESSAGE_TYPE (OFFER, ACK,
2425 or NAK). The server will continue to not accept corrupt client packets.
2427 - Support for 'reserved' (pseudo-static) and BOOTP leases via failover
2430 - Support for adding, removing, and managing class and subclass statements
2433 - The failover implementation was updated to comply with revision 12 of
2436 - 'make install' now creates the initial zero-length dhcpd.leases file if
2437 one does not already exist on the system.
2439 - RFC3942 compliance, site-local option spaces start at 224 now, not 128.
2441 - The Load Balance Algorithm was misimplemented. The current implementation
2444 - lcase() and ucase() configuration expressions have been added which adjust
2445 their arguments from upper to lower and lower to upper cases respectively.
2446 Thanks to a patch from Albert Herranz.
2448 - The dhclient 'reject ...;' statement, which rejects leases given by named
2449 server-identifiers, now permits address ranges to be specified in CIDR
2450 notation. Thanks to a patch from David Boyce.
2452 - The subnet-mask option is now supplied by default, but at lowest
2453 priority. This helps a small minority of clients that provide parameter
2454 request lists, but do not list the subnet-mask option because they were
2455 designed to interoperate with a server that behaves in this manner.
2457 - The FQDN option is similarly supplied even if it does not appear on the
2458 parameter request list, but not to the exclusion of options that do
2459 appear at the parameter request list. Up until now it had ultimate
2460 priority over the client's parameter request list.
2462 - Varying option space code and length bit widths (8/16/32) are now
2463 supported. This is a milestone in achieving RFC 3925 "VIVSO" and
2466 - A new common (server or client) option, 'db-time-format local;', has
2467 been added which prints the local time in /var/db/dhcpd.leases rather
2468 than UTC. Thanks to a patch from Ken Lalonde.
2470 - Some patches to improve DHCP Server startup speed from Andrew Matheson
2471 have been incorporated.
2473 - Failover pairs now implement 'MAC Affinity' on leases moving from the
2474 active to free states. Leases that belonged to the failover secondary
2475 are moved to BACKUP state rather than FREE upon exiting EXPIRED state.
2476 If lease rebalancing must move leases, it tries first to move leases
2477 that belong to the peer in need.
2479 - The server no longer sends POOLREQ messages unless the pool is severely
2480 misbalanced in the peer's favor (see 'man dhcpd.conf' for more details).
2482 - Pool rebalance events no longer happen upon successfully allocating a
2483 lease. Instead, they happen on a schedule. See 'man dhcpd.conf' for the
2484 min-balance and max-balance statements for more information.
2486 - The DHCP Relay Agent Information Option / Link Selection Sub-Option
2487 is now supported. (See RFC3527 for details).
2489 - A new DDNS related server option, update-conflict-detection, has been
2490 added. If this option is enabled, dhcpd will perform normal DHCID
2491 conflict resolution (the default). If this option is disabled, it will
2492 instead trust the assigned name implicitly (removing any other bindings
2493 on that name). This option has not been made available in dhclient.
2495 - In those cases where the DHCP software manufactures an IP header (to
2496 transmit via bpf, lpf, etc), the IP TTL the software selects has been
2497 increased from 16 to 128. This is intended to match Microsoft Windows
2498 DHCP Client behaviour, to increase compatibility.
2500 - 'ignore client-updates;' now has behaviour that is different from
2501 'deny client-updates;'. The client's request is not truly ignored,
2502 rather it is encouraged. Should this value be configured, the server
2503 updates DNS as though client-updates were set to 'deny'. That is, it
2504 enters into DNS whatever it is configured to do already, provided it is
2505 configured to. Then it sends a response to the client that lets the
2506 client believe it is performing client updates (which it will), probably
2507 for a different name. In essence, this lets the client do as it will,
2508 ignoring this aspect of their request.
2510 - Support for compressed 'domain name list' style DHCP option contents, and
2511 in particular the domain search option (#119) was added.
2513 - The DHCP LEASEQUERY protocol as defined in RFC4388 is now implemented.
2514 LEASEQUERY lets you query the DHCP server for information about a lease,
2515 using either an IP address, MAC address, or client identifier. Thanks
2516 to a patch from Justin Haddad.
2518 - DHCPD is now RFC2131 section 4.1 compliant (broadcast to all-ones ip and
2519 ethernet mac address) on the SCO platform specifically without any strange
2520 ifconfig hacks. Many thanks go to the Kroger Co. for donating the
2521 hardware and funding the development.
2523 - A new common configuration executable statement, execute(), has been
2524 added. This permits dhcpd or dhclient to execute a named external
2525 program with command line arguments specified from other configuration
2526 language. Thanks to a patch written by Mattias Ronnblom, gotten to us
2529 - A new dhcp server option 'adaptive-lease-time-threshold' has been added
2530 which causes the server to substantially reduce lease-times if there are
2531 few (configured percentage) remaining leases. Thanks to a patch submitted
2534 - Encapsulated option spaces within encapsulated option spaces is now
2537 Changes since 3.0.6rc1
2539 - supersede_lease() now requeues leases in their respective hardware
2540 address hash bucket. This mirrors client identifier behaviour.
2544 - Assorted fixes for broken network devices: Packet length is now
2545 determined from the IP header length field to finally calculate the
2546 UDP payload length, because some NIC drivers return more data than
2547 they actually received.
2549 - UDP packets are now stored in aligned data structures.
2551 - A logic error in omapi interface code was repaired that might result in
2552 incorrectly indicating 'up' state when any flags were set, rather than
2553 specifically the INTERFACE_REQUESTED flag. Thanks to a patch from
2554 Jochen Voss which got to us via Andrew Pollock at Debian.
2556 - A reference leak on binding scopes set by ddns updates was repaired.
2558 - A memory leak in the minires_nsendsigned() function call was repaired.
2559 Effectively, this leaked ~176 bytes per DDNS update.
2561 - In the case where an "L2" DHCP Relay Agent (one that does not set giaddr)
2562 was directly attached to the same broadcast domain as the DHCP server,
2563 the RFC3046 relay agent information option was not being returned to the
2564 relay in the server's replies. This was fixed; the dhcp server no longer
2565 requires the giaddr to reply with relay agent information. Note that
2566 this also improves compatibility with L2 devices that "intercept" DHCP
2567 packets and expect relay agent information even in unicast (renewal)
2568 replies. Thanks to a patch from Pekka Silvonen.
2570 - A bug was fixed where the BOOTP header 'sname' field had a value, the
2571 copy written to persistent storage was actually the contents of the
2574 - A bug was fixed where the nwip virtual option space was referencing
2575 the fqdn option's virtual option space's option cache.
2577 - Timestamp parsing errors that indicated missing "minutes" fields rather
2578 than the actually missing "seconds" fields have been repaired thanks to
2579 a patch from Kevin Steves.
2581 - A grammar error in the dhclient.8 manpage was repaired thanks to a patch
2584 - Several spelling typos were repaired, and some cross-references to other
2585 relevant documents were included in the manpages, thanks to a patch
2586 by Andrew Pollock which got to us via Tomas Pospisek.
2588 - Some bugs were fixed in the 'emergency relay agent options hologram'
2589 which is used to retain relay agent option contents from when the
2590 client was in INIT or REBIND states. This should solve problems where
2591 relay agent options were not echoed from the server, even when giaddr
2594 - dhclient now closes its descriptor to dhclient.leases prior to executing
2595 dhclient-script. Thanks to a patch from Tomas Pospisek.
2597 - The server's "by client-id" and "by hardware address" hash table lists
2598 are now sorted according to the preference to re-allocate that lease to
2599 returning clients. This should eliminate pool starvation problems
2600 arising when "INIT" clients were given new leases rather than presently
2603 Changes since 3.0.5rc1
2605 - A bug was repaired in fixes to the dhclient, which sought to run the
2606 dhclient-script with the 'EXPIRE' state should it receive a NAK in
2607 response to a REQUEST. The client now iterates the PREINIT state
2608 after the EXPIRE state, so that interfaces that might be configured
2609 'down' can be brought back 'up' and initialized.
2611 - DHCPINFORM handling for clients that properly set ciaddr and come to the
2612 server via a relay aget has been repaired.
2616 - A warning that host statements declared within subnet or shared-network
2617 scopes are actually global has been added.
2619 - The default minimum lease time (if min-lease-time was not specified)
2620 was raised from 0 to 300. 0 is not thought to be sensible, and is
2621 known to be damaging.
2623 - Added additional fatal error sanity checks surrounding lease binding
2624 state count calculations (free/active counts used for failover pool
2627 - Some time value size fixes in 3.0.4 brought on from FreeBSD /usr/ports were
2628 misapplied to server values rather than client values. The server no longer
2629 advertises 8-byte lease-time options when on 64-bit platforms.
2631 - A bug where leases not in ACTIVE state would get billed to billed classes
2632 (classes with lease limitations) was fixed. Non-active leases OFFERed
2633 to clients are no longer billed (but billing is checked before offering).
2635 - The dhcpd.conf.5 manpage was updated in regard to the ddns-domainname
2636 configuration option - the default configuration and results should be
2639 - If the dhclient were to receive a DHCPNAK while it was in the RENEW
2640 state (and consequently, had an active, 'bound' address and related
2641 configuration options), it would fail to 'tear down' this information
2642 before proceeding into INIT state. dhclient now iterates the dhclient-
2643 script with the 'EXPIRE' action to cause these teardowns prior to entering
2644 INIT state. Thanks to a patch from Chris Zimmerman.
2646 - The omapi.1 manpage had some formatting errors repaired thanks to a patch
2647 from Yoshihiko Sarumaru.
2649 - A few lines of code that were failover-specific were moved within
2650 #if defined() clauses so that compilation without failover could be
2653 - The log message emitted when the 'leased-address' value was not available
2654 in dhcpd.conf "executable statements" has been updated to be more helpful.
2655 Manpage information for this value has also been updated.
2657 - Abandoned or dissociated (err condition) leases now remove any related
2658 dynamic dns bindings. Thanks to a patch from Patrick Schoo.
2660 - Attempting to write a new lease file to replace a corrupt (due to
2661 encountering non-retryable errors during writing) lease file should
2662 no longer result in an infinite recursion.
2664 - Host declaration hardware addresses and client identifiers may only be
2665 configured once. dhcpd will now fail to load config files that specify
2666 multiple identifiers (previous versions would silently over-ride the
2667 value with the later configured value).
2669 - Several option codes that have been allocated since our last release
2670 have been named and documented.
2672 - Option names of the form "unknown-123" have been removed from the in-
2673 memory hash tables. In order to support options of these names that
2674 may appear in dhclient.leases or similar in previous versions, the
2675 parser will now find the new option code definition, or mock up a
2676 generic option code definition. This should result in a smooth
2677 transition from one name to the other, as the new name is used to
2680 Changes since 3.0.4rc1
2682 - The dhcp-options.5 manpage was updated to correct indentation errors
2683 thanks to a patch from Jean Delvare.
2685 Changes since 3.0.4b3
2687 - Some manual pages were clarified pursuant to discussion on the dhcp-server
2690 Changes since 3.0.4b2
2692 - Null-termination sensing for certain clients that unfortunately require
2693 it in DHCPINFORM processing was repaired.
2695 - The host-name option and a few others were moved from "X" format to "t"
2696 format to be compatible with new NULL handling functions.
2698 - DHCPINFORM processing is a little more careful about return addressing
2699 its responses, or if responding via a relay. The INFORM related
2700 messages also log the 'effective client ip address' rather than the
2701 client's supplied ciaddr (since some clients produce null ciaddrs).
2703 - The server was inappropriately sending leases to the RESET state in the
2704 event that multiple active leases were found to match a singly-identified
2705 client. This was changed to RELEASED (by accepting a different, ACTIVE
2706 binding, the client is implicitly releasing its lease). This repairs a
2707 bug wherein secondary servers in failover pairs detecting this condition
2708 move leases to RESET, and primaries refuse to accept that state
2709 transition (properly).
2711 - The memset-after-dmalloc() changes made in 3.0.4b1 have been backed out.
2713 Changes since 3.0.4b1
2715 - Command line parsing in omshell was repaired - it no longer closes
2716 STDIN after reading one line.
2718 - The resolver library no longer closes the /etc/resolv.conf file
2719 descriptor it opened twice.
2721 - Changes to trailing NULL removal in 't' option-atoms has been rethought,
2722 it now includes 'd' (domain name) types, and tries hard not to rewind an
2723 option beyond the start of the text field it is un-terminating.
2727 - A DDNS update handling function was misusing the DNS error codes, rather
2728 than the internal generic result enumeration. The result is a confusing
2729 syslog line, logging the wrong condition.
2731 - The DHCP Server was not checking pool balance in the case where it brought
2732 a non-ACTIVE lease out of storage for a client that was returning to use
2733 a lease it once had long ago, and had since expired.
2735 - Failover peers no longer bother to look for free leases to allocate when
2736 they already found the client's ACTIVE lease. DISCOVERs are load balanced
2737 whether freely-allocated or not, unless the server doubts the peer has
2740 - Fixed a bug in dhcrelay agent addition code that suppressed trailing
2741 PAD options - it was suppressing only one trailing PAD option, rather
2742 than the entire block of them.
2744 ! Fixed some unlikely overlapping-region memcpy() bugs in dhcrelay agent
2745 option addition and stripping code. Added a few sanity checks. Although
2746 highly improbable, due to requiring the reception of a DHCP datagram well
2747 in excess of all known to be used physical MTU limitations, it is possible
2748 this may have been used in a stack overflow security vulnerability. Thanks
2749 to a patch from infamous42md.
2751 ! Added some sanity checks to OMAPI connection/authentication code.
2752 Although highly improbable, due to having to deliver in excess of 2^32
2753 bytes of data via the OMAPI channel, not to mention requiring dhcpd to
2754 be able to malloc() a memory region 2^32 bytes in size, it was possible
2755 this might have resulted in a heap overflow security vulnerability.
2756 Thanks to a patch from infamous42md.
2758 - dmalloc() memset()'s the non-debug (data) portion of the allocated
2759 memory to zero. Code that memset()'s the result returned by dmalloc() to
2760 zero is redundant. These redundancies were removed.
2762 - Some type declaration corrections to u_int16_t were made in common/tr.c
2763 (Token Ring support) thanks to a patch from Jason Vas Dias at Red Hat.
2765 - A failover bug that was allowing leases that EXPIRED or were RELEASED
2766 where tsfp and tstp are identical timestamps to languish in these
2767 transitional states has been repaired. As a side effect, lease
2768 databases should be kept more consistent overall, not just for these
2769 transitional states.
2771 - If the lease db is deleted out from under the daemon, and it moves to rewrite
2772 the db, it will go ahead with the operation and move the new db into place
2773 once it detects the old db does not exist.
2775 - dhclient now ignores IRDA, SIT, and IEEE1394 network interfaces, as it
2776 is either nonsensical or (in the case of IEEE1394) is not known to support
2777 these interfaces. Thanks to Marius Gedminas and Andrew Pollock of Debian.
2779 - Some previously undocumented reasons for dhclient-script invoking has
2780 been documented in the dhclient-script.8 manpage.
2782 - Failover potential expiry calculations (TSTP) have been corrected. Results
2783 should be substantially more consistent, and proper given the constraints.
2785 - Adjusted lease state validation checks in potential-conflict, to
2786 account for possible clock skew similarly to normal state, and several
2787 previously illegal transitions were made legal (ex: active->released).
2789 - An impossible sanity check was removed from omapi/buffer.c, thanks to a
2790 patch from 'infamous42md'.
2792 - An OMAPI host/network byte order problem in lease time values has been
2795 - Several minor bugs, largely relating to treating 8-byte time values as
2796 4-byte entities, have been repaired after careful review of the FreeBSD
2797 ports collection's patch set. Thanks to the nameless entities who have
2798 contributed to the FreeBSD ports.
2800 - When writing a trace file, the file is now created with permissions 0600,
2801 to help administrators avoid accidentally publicising sensitive config
2804 - The calculation of the maximum size of DHCP packets no longer includes
2805 Ethernet framing overhead. The result is that the 'Maximum Message
2806 Size' option advertised by clients, or the default value 576, is no
2807 longer reduced by 14 bytes, and instead directly reflects the IP level
2808 MTU (and the default, minimum allowed IP MTU of 576).
2810 - The special status of RELEASED/EXPIRED/RESET leases when a server
2811 is operating in partner-down was fixed. It no longer requires a
2812 lease be twice the MCLT beyond STOS to 'reallocate', and the expiry
2813 event to turn these into FREE leases without peer acknowledgement
2814 (after STOS+MCLT) has been repaired.
2816 - Compilation on older Solaris systems (lacking /usr/include/sys/int_types.h)
2819 - "append"ing a string onto the end of a "t" type option (such as the
2820 domain-name field) that had been improperly NULL-terminated by the
2821 DHCP server will no longer result in a truncated string containing
2822 only the option from the server, and not the expected appended value.
2823 Thanks to a patch from Jason Vas Dias at Red Hat.
2825 - File handlers on configuration state (config files and lease dbs) should
2826 be treated consistently, regardless of whether TRACING is defined or not.
2828 - The Linux build environment has had some minor improvements - better
2829 sensing of 64-bit pointer sizes (only used for establishing an icmp_id),
2830 and corrections to #if operators regarding LINUX_MAJOR should it ever
2833 - The server now tries harder to survive the condition where it is unable
2834 to open a new lease file to rewrite the lease state database.
2836 Changes since 3.0.3b3
2838 - dhclient.conf documentation for interface {} was updated to reflect recent
2839 discussion on the dhcp-hackers mailing list.
2841 - In response to reports that the software does not compile on GCC 4.0.0,
2842 -Werror was removed from Makefile.conf for all platforms that used it.
2843 We will address the true problem in a future release; this is a temporary
2846 Changes since 3.0.3b2
2848 - An error in code changes introduced in 3.0.3b2 was corrected, which caused
2849 static BOOTP clients to receive random addresses.
2851 Changes since 3.0.3b1
2853 - A bug was fixed in BOOTPREQUEST handling code wherein stale references to
2854 host records would be left behind on leases that were not allocated to the
2855 client currently booting (eg in the case where the host was denied booting).
2857 - The dhcpd.conf.5 manpage was updated to be more clear in regards to
2858 multiple host declarations (thanks to Vincent McIntyre). 'Interim' style
2859 dynamic updates were also retouched.
2863 - A bug was fixed where a server might load balance a DHCP REQUEST to its
2864 peer after already choosing not to load balance the preceding DISCOVER.
2865 The peer cannot allocate the originating server's lease.
2867 - In the case where a secondary server lost its stable storage while the
2868 primary was still in communications-interrupted, and came back online,
2869 the lease databases would not be fully transferred to the secondary.
2870 This was due to the secondary errantly sending an extra UPDREQ message
2871 when the primary made its state transition to PARTNER-DOWN known.
2873 - The package will now compile cleanly in gcc 3.3 and 3.4. As a side effect,
2874 lease structures will be 9 bytes smaller on all platforms. Thanks to
2875 Jason Vas Dias at Red Hat.
2877 - Interface discovery code in DISCOVER_UNCONFIGURED mode is now
2878 properly restricted to only detecting broadcast interfaces. Thanks
2879 to a patch from Jason Vas Dias at Red Hat.
2881 - decode_udp_ip_header was changed so that the IP address was copied out
2882 to a variable, rather than referenced by a pointer. This enforces 4-byte
2883 alignment of the 32-bit IP address value. Thanks to a patch from Dr.
2886 - An incorrect log message was corrected thanks to a patch from
2889 - A bug in DDNS was repaired, where if the server's first DDNS action was
2890 a DDNS removal rather than a DDNS update, the resolver library's
2891 retransmit timer and retry timer was set to the default, implying a
2892 15 second timeout interval. Which is a little excessive in a synchronous,
2893 single-threaded system. In all cases, ISC DHCP should now hold fast to
2894 a 1-second timeout, trying only once.
2896 - The siaddr field was being improperly set to the server-identifier when
2897 responding to DHCP messages. RFC2131 clarified the siaddr field as
2898 meaning the 'next server in the bootstrap process', eg a tftp server.
2899 The siaddr field is now left zeroed unless next-server is configured.
2901 - mockup_lease() could have returned in an error condition (or in the
2902 condition where no fixed-address was found matching the shared
2903 network) with stale references to a host record. This is probably not
2904 a memory leak since host records generally never die anyway.
2906 - A bug was repaired where failover servers would let stale client identifiers
2907 persist on leases that were reallocated to new clients not sending an id.
2909 - Binding scopes ("set var = value;") are now removed from leases allocated
2910 by failover peers if the lease had expired. This should help reduce the
2911 number of stale binding scopes on leases.
2913 - A small memory leak was closed involving client identifiers larger than
2914 7 bytes, and failover.
2916 - Configuring a subnet in dhcpd.conf with a subnet mask of 32 bits might
2917 cause an internal function to overflow heap. Thanks to Jason Vas Dias
2920 - Some inconsistencies in treating numbers that the lexer parsed as 'NUMBER'
2921 or 'NUMBER_OR_NAME' was repaired. Hexadecimal parsing is affected, and
2924 - In several cases, parse warnings were being issued before the lexical
2925 token had been advanced to the token whose value was causing an error...
2926 causing parse warnings to claim the problem is on the wrong token.
2928 - Host declarations matching on client identifier for dynamic leases will
2929 no longer match fixed-address host declarations (this is now identical
2930 to behaviour for host records matching on hardware address).
2932 Changes since 3.0.2rc3
2934 - A previously undocumented configuration directive, 'local-address',
2935 was documented in the dhcpd.conf manpage.
2937 Changes since 3.0.2rc2
2939 - Two variables introduced in 3.0.2b1 were used without being initialized
2940 in the case where neither the FILE nor SNAME fields were available for
2941 overloading. This was repaired.
2943 - A heretofore believed to be impossible corner case of the option
2944 overloading implementation turned out to be possible ("Unable to sort
2945 overloaded options after 10 tries."). The implementation was reworked
2946 to consider the case of an option so large it would require more than
2947 three chunks to fit.
2949 - Many other instances of variables being used without being initialized
2952 - An uninitialized variable in omapi_io_destroy() led to the discovery
2953 that this function may result in orphaned pointers (and hence, a memory
2956 Changes since 3.0.2rc1
2958 - allocate_lease() was rewritten to repair a bug in which the server would
2959 try to allocate an ABANDONED lease when FREE leases were available.
2961 Changes since 3.0.2b1
2963 - Some dhcp-eval.5 manpage formatting was repaired.
2967 - A bug was fixed in the server's 'option overloading' implementation,
2968 where options loaded into the 'file' and 'sname' packet fields were
2969 not aligned precisely as rfc2131 dictates.
2971 - The FreeBSD client script was changed to support the case where a domain
2972 name was not provided by the server.
2974 - A memory leak in 'omshell' per each command line parsed was
2975 repaired, thanks to a patch from Jarkko Torppa.
2977 - Log functions writing to stderr were adjusted to use the STDERR_FILENO
2978 system definition rather than '2'. This is a no-op for 90% of platforms.
2980 - One call to trace_write_packet_iov() counted the number of io vectors
2981 incorrectly, causing inconsistent tracefiles. This was fixed.
2983 - Some expression parse failure memory leaks were closed.
2985 - A host byte order problem in tracefiles was repaired.
2987 - Pools configured in DHCPD for failover possessing permission lists that
2988 previously were assumed to not include dynamic bootp clients are now
2989 a little more pessimistic. The result is, dhcpd will nag you about just
2990 about most pools that possess a 'allow' statement with no 'deny' that
2991 would definitely match a dynamic bootp client.
2993 - The 'ddns-update-style' configuration warning bit now insists that
2994 the configuration be globally scoped.
2996 - Two memory leaks in dhclient were closed thanks to a patch from Felix
2999 - Some minor but excellently pedantic documentation errors were fixed
3000 thanks to a patch from Thomas Klausner.
3002 - Bugs in operator precedence in executable statements have been repaired
3003 once again. More legal syntaxes should be parsed legally.
3005 - Failing to initialize a tracefile for any reason if a tracefile was
3006 specified is now a fatal error. Thanks to a patch from Albert Herranz.
3008 - Corrected a bug in which the number of leases transferred as calculated
3009 by the failover primary and sent to peers in POOLRESP responses may be
3010 incorrect. This value is not believed to be used by other failover
3011 implementations, excepting perhaps as logged information.
3013 - Corrected a bug in which 'dhcp_failover_send_poolresp()' was in fact
3014 sending POOLREQ messages instead of POOLRESP mesasges. This message
3015 was essentially ignored since failover secondaries effectively do not
3016 respond to POOLREQ messages.
3018 - Type definitions for various bitwidths of integers in the sunos5-5
3019 build of ISC DHCP have been fixed. It should compile and run more
3020 easily when built in 64-bit for this platform.
3022 - "allow known-clients;" is now a legal syntax, to avoid confusion.
3024 - If one dhcp server chooses to 'load balance' a request to its failover
3025 peer, it first checks to see if it believes said peer has a free
3026 lease to allocate before ignoring the DISCOVER.
3028 - log() was logging a work buffer, rather than the value returned by
3029 executing the statements configured by the user. In some cases,
3030 the work buffer and the intended results were the same. In some other
3031 cases, they were not. This was fixed thanks to a patch from Gunnar
3032 Fjone and directconnect.no.
3034 - Compiler warnings for some string type conversions was fixed, thanks
3035 to Andreas Gustafsson.
3037 - The netbsd build environments were simplified to one, in which
3038 -Wconversion is not used, thanks to Andreas Gustafsson.
3040 - How randomness in the backoff-cutoff dhclient configuration variable
3041 is implemented was better documented in the manpage, and the behaviour
3042 of dhclient in REQUEST timeout handling was changed to match that of
3043 DISCOVER timeout handling.
3045 - Omapi was hardened against clients that pass in null values, thanks
3046 to a patch from Mark Jason Dominus.
3048 - A bug was fixed in dhclient that kept it from doing client-side
3049 ddns updates. Thanks to a patch from Andreas Gustafsson, which
3050 underwent some modification after review by Jason Vas Dias.
3052 - Failover implementations disconnected due to the network between
3053 them (rather than one of the two shutting down) will now try to
3054 re-establish the failover connection every 5 seconds, rather than
3055 to simply try once and give up until one of them is restarted.
3056 Thanks to a patch from Ulf Ekberg from Infoblox, and field testing
3057 by Greger V. Teigre which led to an enhancement to it.
3059 - A problem that kept DHCP Failover secondaries from tearing down
3060 ddns records was repaired. Thanks to a patch from Ulf Ekberg from
3063 - 64bit pointer sizes are detected properly on FreeBSD now.
3065 - A bug was repaired where the DHCP server would leave stale references
3066 to host records on leases it once thought about offering to certain
3067 clients. The result would be to apply host and 'known' scopes to the
3068 wrong clients (possibly denying booting). NOTE: The 'mis-host' patch
3069 that was being circulated as a workaround is not the way this bug was
3070 fixed. If you were a victim of this bug in 3.0.1, you are cautioned
3071 to proceed carefully and see if it fixes your problem.
3073 - A bug was repaired in the server's DHCPINFORM handling, where it
3074 tried to divine the client's address from the source packet and
3075 would get it wrong. Thanks to Anshuman Singh Rawat.
3077 - A log message was introduced to help illuminate the case where the
3078 server was unable to find a lease to assign to any BOOTP client.
3079 Thanks to Daniel Baker.
3081 - A minor dhcpd.conf.5 manpage error was fixed.
3083 Changes since 3.0.1rc14
3085 - The global variable 'cur_time' was centralized and is now uniformly of a
3086 type #defined in system-dependent headers. It had previously been defined
3087 in one of many places as a 32-bit value, and this causes mayhem on 64-bit
3088 big endian systems. It probably wasn't too healthy on little endian
3091 - A printf format string error introduced in rc14 was repaired.
3093 - AIX system-dependent header file was altered to only define NO_SNPRINTF
3094 if the condition used to #ifdef in vsnprintf in AIX' header files
3097 - The Alpha/OSF system-dependent header file was altered to define
3098 NO_SNPRINTF on OS revisions older than 4.0G.
3100 - omapip/test.c had string.h added to its includes.
3102 Changes since 3.0.1rc13
3104 ! CAN-2004-0460 - CERT VU#317350: Five stack overflow exploits were closed
3105 in logging messages with excessively long hostnames provided by the
3106 clients. It is highly probable that these could have been used by
3107 attackers to gain arbitrary root access on systems using ISC DHCP 3.0.1
3108 release candidates 12 or 13. Special thanks to Gregory Duchemin for
3109 both finding and solving the problem.
3111 ! CAN-2004-0461 - CERT VU#654390: Once the above was closed, an opening
3112 in log_*() functions was evidenced, on some specific platforms where
3113 vsnprintf() was not believed to be available and calls were wrapped to
3114 sprintf() instead. Again, credit goes to Gregory Duchemin for finding
3115 the problem. Calls to snprintf() are now linked to a distribution-local
3116 snprintf implementation, only in those cases where the architecture is
3117 not known to provide one (see includes/cf/[arch].h). If you experience
3118 linking problems with snprintf/vsnprintf or 'isc_print_' functions, this
3119 is where to look. This vulnerability did not exist in any previously
3120 published version of ISC DHCP.
3122 - Compilation on hpux 11.11 was repaired.
3124 - 'The cross-compile bug fix' was backed out.
3126 Changes since 3.0.1rc12
3128 - Fixed a bug in omapi lease lookup function, to form the hardware
3129 address for the hash lookup correctly, thanks to a patch from
3132 - Fixed a bug where dhcrelay was sending relayed responses back to the
3133 broadcast address, but with the source's unicast mac address. Should
3134 now conform to rfc2131 section 4.1.
3136 - Cross-compile bug fix; use $(AR) instead of ar. Thanks to Morten Brorup.
3138 - Fixed a crash bug in dhclient where dhcpd servers that do not provide
3139 renewal times results in an FPE. As a side effect, dhclient can now
3140 properly handle 0xFFFFFFFF (-1) expiry times supplied by servers. Thanks
3141 to a patch from Burt Silverman.
3143 - The 'ping timeout' debugs from rc12 were removed to -DDEBUG only,
3144 and reformatted to correct a compilation error on Solaris platforms.
3146 - A patch was applied which fixes a case where leases read from the
3147 leases database do not properly over-ride previously read leases.
3149 - dhcpctl.3 manpage was tweaked.
3151 Changes since 3.0.1rc11
3153 - A patch from Steve Campbell was applied with minor modifications to
3154 permit reverse dns PTR record updates with values containing spaces.
3156 - A patch from Florian Lohoff was applied with some modifications to
3157 dhcrelay. It now discards packets whose hop count exceeds 10 by default,
3158 and a command-line option (-c) can be used to set this threshold.
3160 - A failover bug relating to identifying peers by name length instead of
3163 - Declaring failover configs within shared-network statements should no
3164 longer result in error.
3166 - The -nw command line option to dhclient now works.
3168 - Thanks to a patch from Michael Richardson:
3169 - Some problems with long option processing have been fixed.
3170 - Some fixes to minires so that updates of KEY records will work.
3172 - contrib/ms2isc was updated by Shu-Min Chang of the Intel Corporation.
3173 see contrib/ms2isc/readme.txt for revision notes.
3175 - Dhclient no longer uses shell commands to kill another instance of
3176 itself, it sends the signal directly. Thanks to a patch from Martin
3179 - The FreeBSD dhclient-script was changed so that a failure to write to
3180 /etc/resolv.conf does not prematurely end the script. This keeps dhclient
3181 from looping infinitely when this is the case. Thanks to a patch from
3184 - A patch from Bill Stephens was applied which resolves a problem with lease
3185 expiry times in failover configurations.
3187 - A memory leak in configuration parsing was closed thanks to a patch from
3190 - The function which discovers interfaces will now skip non-broadcast or
3191 point-to-point interfaces, thanks to a patch from David Brownlee.
3193 - Options not yet known by the dhcpd or dhclient have had their names
3194 changed such that they do not contain # symbols, in case they should ever
3195 appear in a lease file. An option that might have been named "#144" is
3198 - Another patch from Bill Stephens which allows the ping-check timeout to
3199 be configured as 'ping-timeout'. Defaults to 1.
3201 Changes since 3.0.1rc10
3203 - Potential buffer overflows in minires repaired.
3205 - A change to the linux client script to use /bin/bash, since /bin/sh may
3208 - Some missing va_end cleanups thanks to a patch from Thomas Klausner.
3210 - A correction of boolean parsing syntax validation - some illegal syntaxes
3211 that worked before are now detected and produce errs, some legal syntaxes
3212 that errored before will now work properly.
3214 - Some search-and-replace errors that caused some options to change their
3217 - Shu-min Chang of the Intel corporation has contributed a perl script and
3218 module that converts the MS NT4 DHCP configuration to a ISC DHCP3
3221 - Applied the remainder of the dhcpctl memory leak patch provided by Bill
3222 Squier at ReefEdge, Inc. (groo@reefedge.com).
3224 - Missing non-optional failover peer configurations will now result in a soft
3225 error rather than a null dereference.
3227 Changes since 3.0.1rc9
3229 - A format string was corrected to fix compiler warnings.
3231 - A number of spelling corrections were made in the man pages.
3233 - The dhclient.conf.5 man page was changed to refer to do-forward-updates
3234 rather than a configuration option that doesn't exist.
3236 - A FreeBSD-specific bug in the interface removal handling was fixed.
3238 - A Linux-specific Token Ring detection problem was fixed.
3240 - Hashes removed from as-yet-unknown agent options, having those options
3241 appear in reality before we know about them will no longer produce
3242 self-corrupting lease databases.
3244 - dhclient will use the proper port numbers now when using the -g option.
3246 - A order-of-operations bug with 2 match clauses in 1 class statement is
3247 fixed thanks to a patch from Andrew Matheson.
3249 - Compilation problems on Solaris were fixed.
3251 - Compilation problems when built with DEBUG or DEBUG_PACKET were repaired.
3253 - A fix to the dhcp ack process which makes certain group options will be
3254 included in the first DHCPOFFER message was made thanks to a patch from
3257 - A few memory leaks were repaired thanks to patches from Bill Squier at
3258 ReefEdge, Inc. (groo@reefedge.com).
3260 - A fix for shared-networks that sometimes give clients options for the
3261 wrong subnets (in particular, 'option routers') was applied, thanks to
3262 Ted Lemon for the patch.
3264 - Omshell's handling of dotted octets as values was changed such that dots
3265 one after the other produce zero values in the integer string.
3267 Changes since 3.0.1rc8
3269 - Fix a format string vulnerability in the server that could lead to a
3270 remote root compromise (discovered by NGSEC Research Team, www.ngsec.com).
3272 - Add additional support for NetBSD/sparc64.
3274 - Fix a bug in the command-line parsing of the client. Also, resolve
3277 - Add better support for shells other than bash in the Linux client
3280 - Various build fixes for modern versions of FreeBSD and Linux.
3282 - Fix a bad bounds check when printing binding state names.
3284 - Clarify documentation about fixed-address and multiple addresses.
3286 - Fix a typo in the authoritative error message.
3288 - Make a log entry when we can't write a billing class.
3290 - Use conversion targets that are the right size on all architectures.
3292 - Increment the hop count when relaying.
3294 - Log a message when lease state is changed through OMAPI.
3296 - Don't rerun the shared_network when evaluating the pool.
3298 - Fix a reversed test in the parser.
3300 - Change the type of rbuf_max.
3302 - Make FTS_LAST a manifest constant to quiet warnings.
3304 Changes since 3.0.1rc7
3306 - Fix two compiler warnings that are generated when compiling on Solaris
3307 with gcc. These stop the build, even though they weren't actually
3308 errors, because we prefer that our builds generate no warnings.
3310 Changes since 3.0.1rc6
3312 - Don't allow a lease that's in the EXPIRED, RELEASED or RESET state
3315 - Implement lease stealing for cases where the primary has fewer leases
3316 than the secondary, as called for by the standard.
3318 - Add a fudge factor to the lease expiry acceptance code, (suggested
3319 by Kevin Miller of CMU).
3321 - Fix a bug in permit_list_match that made it much too willing to say
3322 that two permit lists matched.
3324 - Unless DEBUG_DNS_UPDATES is defined, print more user-friendly (and
3325 also more compact) messages about DNS updates.
3327 - Fix a bug in generating wire-format domain names for the FQDN option.
3329 - Fix a bug where the FQDN option would not be returned if the client
3330 requested it, contrary to the standard.
3332 - On Darwin, use the FreeBSD DHCP client script.
3334 - On NetBSD/sparc, don't check for casting warnings.
3336 - Add a flag in the DHCP client to disable updating the client's A
3337 record when sending an FQDN option indicating that the client is
3338 going to update its A record.
3340 - In the client, don't attempt a DNS update until one second after
3341 configuring the new IP address, and if the update times out, keep
3342 trying until a response, positive or negative, is received from the
3345 - Fix an uninitialized memory bug in the DHCP client.
3347 - Apply some FreeBSD-specific bug fixes suggested by Murray Stokely.
3349 - Fix a bug in ns_parserr(), where it was returning the wrong sort
3350 of result code in some cases (suggested by Ben Harris of the
3353 - Fix a bug in is_identifier(), where it was checking against EOF
3354 instead of the END_OF_FILE token (also suggested by Ben Harris).
3356 - Fix a bug where if an option universe contained no options, the
3357 DHCP server could dump core (Walter Steiner).
3359 - Fix a bug in the handling of encapsulated options.
3361 - Fix a bug that prevented NWIP suboptions from being processed.
3363 - Delete the FTS_BOOTP and FTS_RESERVED states and implement them
3364 as modifier flags to the FTS_ACTIVE state, as called for in the
3365 failover protocol standard.
3367 - Fix bugs in the pool merging code that resulted in references and
3368 dereferences of null pointers. This bug had no impact unless the
3369 POINTER_DEBUG flag was defined.
3371 - In the server, added a do-forward-updates flag that can be used to
3372 disable forward updates in all cases, so that sites that want the
3373 clients to take sole responsibility for updating their A record can
3376 - Make it possible to disable optimization of PTR record updates.
3378 Changes since 3.0.1rc5
3380 - Include some new documentation and changes provided by Karl Auer.
3382 - Add a workaround for some Lexmark printers that send a double-NUL-
3383 terminated host-name option, which would break DNS updates.
3385 - Fix an off-by-one error in the MAC-address checking code for
3386 DHCPRELEASE that was added in 3.0.1rc5.
3388 - Fix a bug where client-specific information was not being discarded
3389 from the lease when it expired or was released, resulting in
3390 problems if the lease was reallocated to a different client.
3392 - If more than one allocation pool is specified that has the same set
3393 of constraints as another allocation pool on the same shared
3394 network, merge the two pools.
3396 - Don't print an error in fallback_discard, since this just causes
3397 confusion and does not appear to be helping to encourage anyone to
3400 Changes since 3.0.1rc4
3402 - Fix a bug that would cause the DHCP server to spin if asked to parse
3403 a certain kind of incorrect statement.
3405 - Fix a related bug that would prevent an error from being reported in
3408 - Additional documentation.
3410 - Make sure that the hardware address matches the lease when
3411 processing a DHCPRELEASE message.
3413 Changes since 3.0.1rc3
3415 - A minor bug fix in the arguments to a logging function call.
3416 - Documentation update for dhcpd.conf.
3418 Changes since 3.0.1rc2
3420 - Allow the primary to send a POOLREQ message. This isn't what the current
3421 failover draft says to do, so we may have to back it out if I can't get the
3422 authors to relent, but the scheme for balancing that's specified in the
3423 current draft seems needlessly hairy, so I'm floating a trial balloon.
3424 The rc1 code did not implement the method described in the draft either.
3426 Changes since 3.0.1rc1
3428 - Treat NXDOMAIN and NXRRSET as success when we are trying to delete a
3429 domain or RRSET. This allows the DHCP server to forget about a name
3430 it added to the DNS once it's been removed, even if the DHCP server
3431 wasn't the one that removed it.
3433 - Install defaults for failover maximum outstanding updates and maximum
3434 silent time. This prevents problems that might occur if these values
3435 were not configured.
3437 - Don't do DDNS deletes if ddns-update-style is none.
3439 - Return relay agent information options in DHCPNAK. This prevents DHCPNAK
3440 messages from being dropped when the relay agent information option contains
3441 routing information.
3443 - Fix a problem where coming up in recover wouldn't result in an update
3446 - Add some more chatty messages when we start a recovery update and when it's
3449 - Fix a possible problem where some state might have been left around
3450 after the peer lost contact and regained contact about how many updates
3453 - Don't nix a lease update because of a lease conflict. This test has
3454 never (as far as I know) prevented a mistake, and it appears to cause
3455 problems with failover.
3457 - Add support in rc history code for keeping a selective history, rather
3458 than a history of all references and dereferences. This code is only used
3459 when extensive additional debugging is enabled.
3463 - Make allocators for hash tables. As a side effect, this fixes a memory
3464 smash in the subclass allocation code.
3466 - Fix a small bug in omshell where if you try to close an object when
3467 no object is open, it dumps core.
3469 - Fix an obscure coredump that could occur on shutdown.
3471 - Fix a bug in the recording of host declaration rubouts in the lease file.
3473 - Fix two potential spins in the host deletion code.
3475 - Fix a core dump that would happen if an application tried to update
3476 a host object attribute with a null value.
3478 Changes since 3.0 Release Candidate 12
3480 - Fix a memory leak in the evaluation code.
3482 - Fix an obscure core dump.
3484 - Print a couple of new warnings when parsing the configuration file
3485 when crucial information is left out.
3487 - Log "no free leases" as an error.
3489 - Documentation updates.
3491 Changes since 3.0 Release Candidate 11
3493 - Always return a subnet selection option if one is sent.
3495 - Fix a warning that was being printed because an automatic data
3496 structure wasn't zeroed.
3498 - Fix some failover state transitions that were being handled
3501 - When supersede_lease is called on a lease whose end time has already
3502 expired, but for which a state transition has not yet been done, do
3503 a state transition. This fixes the case where if the secondary
3504 allocated a lease to a client and the lease "expired" while the
3505 secondary was in partner-down, no expiry event would actually
3506 happen, so the lease would remain active until the primary was
3509 Changes since 3.0 Release Candidate 10
3511 - Fix a bug that was preventing released leases from changing state
3512 in failover-enabled pools.
3514 - Fix a core dump in the client identifier finder code (for host
3517 - Finish fixing a bug where bogus data would sometimes get logged to
3518 the dhclient.leases file because it was opened as descriptor 2.
3520 - Fix the Linux dhclient-script according to suggestions made by
3521 several people on the dhcp-client mailing list.
3523 - Log successful DNS updates at LOG_INFO, not LOG_ERROR.
3525 - Print an error message and refuse to run if a failover peer is
3526 defined but not referenced by any pools.
3528 - Correct a confusing error message in failover.
3530 Changes since 3.0 Release Candidate 9
3532 - Fix a bug in lease allocation for Dynamic BOOTP clients.
3534 Changes since 3.0 Release Candidate 8 Patchlevel 2
3536 - Fix a bug that prevented update-static-leases from working.
3538 - Document failover-state OMAPI object.
3540 - Fix a compilation error on SunOS 4.
3542 Changes since 3.0 Release Candidate 8 Patchlevel 1
3544 - Fix a parsing bug that broke dns updates (both interim and ad-hoc).
3545 This was introduced in rc8pl1 as an unintended result of the memory
3546 leakage fixes that were in pl1.
3548 - Fix a long-standing bug where the server would record that an update
3549 had been done for a client with no name, even though no update had
3550 been done, and then when the client's lease expired the deletion of
3551 that nonexistant record would time out because the name was the null
3554 - Clean up the omshell, dhcpctl and omapi man pages a bit.
3556 Changes since 3.0 Release Candidate 8
3558 - Fix a bug that could cause the DHCP server to spin if
3559 one-lease-per-client was enabled.
3561 - Fix a bug that was causing core dumps on BSD/os in the presence of
3564 - In partner-down state, don't restrict lease lengths to MCLT.
3566 - On the failover secondary, record the MCLT received from the primary
3567 so that if we come up without a connection to the primary we don't
3568 wind up giving out zero-length leases.
3570 - Fix some compilation problems on BSD/os.
3572 - Fix a bunch of memory leaks.
3574 - Fix a couple of bugs in the option printer.
3576 - Fix an obscure error reporting bug in the dns update code, and also
3577 make the message clearer when a key algorithm isn't supported.
3579 - Fix a bug in the tracing code that prevented trace runs that used
3580 tcp connections from being played back.
3582 - Add some additional debugging capability for catching memory leaks
3585 - Make the client release the lease correctly on shutdown.
3587 - Add some configurability to the build system.
3589 - Install omshell manual page in man1, not man8.
3591 - Craig Gwydir sent in a patch that fixes a long-standing bug in the
3592 DHCP client that could cause core dumps, but that for some reason
3593 hadn't been noticed until now.
3595 Changes since 3.0 Release Candidate 7
3597 - Fix a bug in failover where we weren't sending updates after a
3598 transition from communications-interrupted to normal.
3600 - Handle expired/released/reset -> free transition according to the
3601 protocol specification (this works - the other way not only wasn't
3602 conformant, but also didn't work).
3604 - Add a control object in both client and server that allows either
3605 daemon to be shut down cleanly.
3607 - When writing a lease, if we run out of disk space, shut down the
3608 output file and insist on writing a new one before proceeding.
3610 - In the server, if the OMAPI listener port is occupied, keep trying
3611 to get it, rather than simply giving up and exiting.
3613 - Support fetching variables from leases and also updating and adding
3614 variables to leases via OMAPI.
3616 - If two failover peers have wildly different clocks, refuse to start
3619 - Fix a bug in the DNS update code that could cause core dumps when
3620 running on alpha processors.
3622 - Fixed a bug in ddns updates for static lease entries, thanks to a
3623 patch from Andrey M Linkevitch.
3625 - Add support for Darwin/MacOS X
3627 - Install omshell (including new documentation).
3629 - Support DNS updates in the client (this is a very obscure feature
3630 that most DHCP client users probably will not be able to use).
3632 - Somewhat cleaner status logging in the client.
3634 - Make OMAPI key naming syntax compatible with the way keys are
3635 actually named (key names are domain names).
3637 - Fix a bug in the lease file writer.
3639 - Install DHCP ISC headers in a different place than BIND 9 ISC
3640 headers, to avoid causing trouble in BIND 9 builds.
3642 - Don't send updates for attributes on an object when the attributes
3643 haven't changed. Support deleting attributes on remote objects.
3645 - Fix a number of bugs in omshell, and add the unset and refresh
3648 - Handle disconnects in OMAPI a little bit more intelligently (so that
3649 the caller gets ECONNRESET instead of EINVAL).
3651 - Fix a bunch of bugs in the handling of clients that have existing
3652 leases when the try to renew their leases while failover is
3655 Changes since 3.0 Release Candidate 6
3657 - Fix a core dump that could happen when processing a DHCPREQUEST from
3658 a client that had a host declaration that contained both a
3659 fixed-address declaration and a dhcp-client-identifier option
3660 declaration, if the client identifier was longer than nine bytes.
3662 - Fix a memory leak that could happen in certain obscure cases when
3663 using omapi to manipulate leases.
3665 - Fix some bugs and omissions in omshell.
3667 Changes since 3.0 Release Candidate 5
3669 - Fix a bug in omapi_object_dereference that prevented objects in
3670 chains from having their reference counts decreased on dereference.
3672 - Fix a bug in omapi_object_dereference that would prevent object
3673 chains from being freed upon removal of the last reference external
3676 - Fix a number of other memory leaks in the OMAPI protocol subsystem.
3678 - Add code in the OMAPI protocol handler to trace memory leakage.
3680 - Clean up the memory allocation/reference history printer.
3682 - Support input of dotted quads and colon-separated hex lists as
3683 attribute values in omshell.
3685 - Fix a typo in the Linux interface discovery code.
3687 - Conditionalize a piece of trace code that wasn't conditional.
3689 Changes since 3.0 Release Candidate 4
3691 - Fix a bug that would prevent leases from being abandoned properly on
3694 - Fix failover peer OMAPI support.
3696 - In failover, correctly handle expiration of leases. Previously,
3697 leases would never be reclaimed because they couldn't make the
3698 transition from EXPIRED to FREE.
3700 - Fix some broken failover state transitions.
3702 - Documentation fixes.
3704 - Take out an unnecessary check in DHCP relay agent information option
3705 stashing code that was preventing REBINDING clients from rebinding.
3707 - Prevent failover peers from allocating leases in DHCPREQUEST
3708 processing if the lease belongs to the other server.
3710 - Record server version in lease file introductory comment.
3712 - Correctly report connection errors in OMAPI and failover.
3714 - Make authentication signature algorithm name comparisons in OMAPI
3717 - Fix compile problem on SunOS 4.x
3719 - If a signature algorithm is not terminated with '.', terminate it so
3720 that comparisons between fully-qualified names will work
3723 - Different SIOCGIFCONF probe code, may "fix" problem on some Linux
3724 systems with the probe not working correctly.
3726 - Don't allow user to type omapi key on command line of omshell.
3728 Changes since 3.0 Release Candidate 3
3730 - Do lease billing on startup in a way that I *think* will finally do
3731 the billing correctly - the previous method could overbill as a
3732 result of duplicate leases.
3734 - Document OMAPI server objects.
3736 Changes since 3.0 Release Candidate 2 Patchlevel 1
3738 - Fix some problems in the DDNS update code. Thanks to Albert
3739 Herranz for figuring out the main problem.
3741 - Fix some reference counting errors on host entries that were causing
3744 - Fix a byte-swap bug in the token ring code, thanks to Jochen
3747 - Fix a bug in lease billing, thanks to Jonas Bulow.
3749 Changes since 3.0 Release Candidate 2
3751 - Change the conditions under which a DHCPRELEASE is actually
3752 committed to be consistent with lease binding states rather than
3753 using the lease end time. This may fix some problems with the
3756 - Fix a bug where lease updates would fail on Digital Unix (and maybe
3757 others) because malloc was called with a size of zero.
3759 - Fix a core dump that happens when the DHCP server can't create its
3762 Changes since 3.0 Release Candidate 1 Patchlevel 1
3764 - Fix the dhcp_failover_put_message to not attempt to allocate a
3765 zero-length buffer. Some versions of malloc() fail if you try to
3766 allocate a zero-length buffer, and this was causing problems on,
3769 - Fix a case where the failover code was printing an error message
3770 when no error had occurred.
3772 - Fix a problem where when a server went down and back up again, the
3773 peer would not see a state transition and so would stay in the
3774 non-communicating state.
3776 - Be smart about going into recover_wait.
3778 - Fix a problem in the failover implementation where peers would fail
3779 to come into sync if interrupted in the RECOVER state. This could
3780 have been the cause of some problems people have reported recently.
3782 - Fix a problem with billing classes where they would not be unbilled
3783 when the client lease expired.
3785 - If select fails, figure out which descriptor is bad, and cut it out
3786 of the I/O loop. This prevents a potentially nasty spin. I
3787 haven't heard any report it in a while, but it came up consistently
3790 - Fix a bug in the relay agent where if you specified interfaces on
3791 the command line, it would fail.
3793 - Fix a couple of small bugs in the omapi connection object (no known
3796 - Add the missing 3.0 Beta 1 lease conversion script.
3798 - Read dhcp client script hooks if they exist, rather than only if
3801 Changes since 3.0 Release Candidate 1
3803 - Fix a memory smash that happens when fixed-address leases are used.
3804 ANY SITE AT WHICH FIXED-ADDRESS STATEMENTS ARE BEING USED SHOULD
3805 UPGRADE IMMEDIATELY. This has been a long-standing bug - thanks to
3806 Alvise Nobile for discovering it and helping me to find it!
3808 - Fix a small bug in binary-to-ascii, thanks to H. Peter Anvin of
3811 - There is a known problem with the DHCP server doing failover on
3812 Compaq Alpha systems. This patchlevel is not a release candidate
3813 because of this bug. The bug should be straightforward to fix, so
3814 a new release candidate is expected shortly.
3816 - There is a known problem in the DDNS update code that is probably a
3817 bug, and is not, as far as we know, fixed in this patchlevel.
3819 Changes since 3.0 Beta 2 Patchlevel 24
3821 - Went over problematic failover state transitions and made them all
3822 work, so that failover should now much less fragile.
3824 - Add some dhcpctl and omapi documentation
3826 - Fix compile errors when compiling with unusual predefines.
3828 - Make Token Ring work on Linux 2.4
3830 - Fix the Digital Unix BPF_WORDALIGN bug.
3832 - Fix some dhcp client documentation errors.
3834 - Update some parts of the README file.
3836 - Support GCC on SCO.
3838 Changes since 3.0 Beta 2 Patchlevel 23
3840 - Fix a bug in the DNS update code where a status code was not being
3841 checked. This may have been causing core dumps.
3843 - When parsing the lease file, if a lease declaration includes a
3844 billing class statement, and the lease already has a billing class,
3845 unbill the old class.
3847 - When processing failover transactions, where acks will be deferred,
3848 process the state transition immediately.
3850 - Don't try to use the new SIOCGIFCONF buffer size detection code on
3851 Linux 2.0, which doesn't provide this functionality.
3853 - Apply a patch suggested by Tuan Uong for a problem in dlpi.c.
3855 - Fix a problem in using the which command in the configure script.
3857 - Fix a parse error in the client when setting up an omapi listener.
3859 - Document the -n and -g flags to the client.
3861 - Make sure there is always a stdin and stdout on startup. This
3862 prevents shell scripts from accidentally writing error messages into
3863 configuration files that happen to be opened as stderr.
3865 - If an interface is removed, the client will now notice that it is
3866 gone rather than spinning. This has only been tested on NetBSD.
3868 - The client will attempt to get an address even if it can't create a
3871 - Don't overwrite tracefiles.
3873 - Fix some memory allocation bugs in failover.
3875 Changes since 3.0 Beta 2 Patchlevel 22
3877 - Apply some patches suggested by Cyrille Lefevre, who is maintaining
3878 the FreeBSD ISC DHCP Distribution port.
3880 - Fix a core dump in DHCPRELEASE.
3882 Changes since 3.0 Beta 2 Patchlevel 21
3884 - This time for sure: fix the spin described in the changes for pl20.
3886 Changes since 3.0 Beta 2 Patchlevel 20
3888 - Fix a problem with Linux detecting large numbers of interfaces (Ben)
3890 - Fix a memory smash in the quotify code, which was introduced in
3893 - Actually fix the spin described in the changes for pl20. The
3894 previous fix only partially fixed the problem - enough to get it
3895 past the regression test.
3897 Changes since 3.0 Beta 2 Patchlevel 19
3899 - Fix a bug that could cause the server to abort if compiled with
3900 POINTER_DEBUG enabled.
3902 - Fix a bug that could cause the server to spin when responding to a
3905 - Apply Joost Mulders' suggested patches for DLPI on x86.
3907 - Support NUL characters in quoted strings.
3909 - Install unformatted man pages on SunOS.
3911 Changes since 3.0 Beta 2 Patchlevel 18
3913 - Allow the server to be placed in partner-down state using OMAPI.
3916 - Implement omshell, which can be used to do arbitrary things to the
3917 server (in theory). (Damien Neil)
3919 - Fix a case where if a client had two different leases the server could
3920 actually dereference the second one when it hadn't been referenced,
3921 leading to memory corruption and a core dump. (James Brister)
3923 - Fix a case where a client could request the address of another client's
3924 lease, but find_lease wouldn't detect that the other client had it, and
3925 would attempt to allocate it to the client, resulting in a lease conflict
3928 - Fix a case where a client with more than one client identifier could be
3929 given a lease where the hardware address was correct but the client
3930 identifier was not, resulting in a lease conflict message.
3932 - Fix a problem where the server could write out a colon-separated
3933 hex list as a value for a variable, which would then not parse.
3934 The fix is to always write strings as quoted strings, with any
3935 non-printable characters quoted as octal escape sequences. So
3936 a file written the old way still won't work, but new files written
3939 - Fix documentation for sending non-standard options.
3941 - Use unparsable names for unknown options. WARNING: this will
3942 break any configuration files that use the option-nnn convention.
3943 If you want to continue to use this convention for some options,
3944 please be sure to write a definition, like this:
3946 option option-nnn code nnn = string;
3948 You can use a descriptive name instead of option-nnn if you like.
3950 - Fix a problem where we would see a DHCPDISCOVER/DHCPOFFER/
3951 DHCPREQUEST/DHCPACK/DHCPREQUEST/DHCPNAK sequence. This was the
3952 result of a deceptively silly bug in supersede_lease.
3954 - Fix client script exit status check, according to a fix supplied by
3957 - Fix an endianness bug in the tracefile support, regarding ICMP
3960 - Fix a bug in the client where the medium would not work correctly if
3961 it contained quoted strings.
3963 ** there was no pl17 **
3965 Changes since 3.0 Beta 2 Patchlevel 16
3967 - Add support for transaction tracing. This allows the state of the
3968 DHCP server on startup, and all the subsequent transactions, to be
3969 recorded in a file which can then be played back to reproduce the
3970 behaviour of the DHCP server. This can be used to quickly
3971 reproduce bugs that cause core dumps or corruption, and also for
3972 tracking down memory leaks.
3974 - Incorporate some bug fixes provided by Joost Mulders for the DLPI
3975 package which should clear up problems people have been seeing on
3978 - Fix bugs in the handling of options stored as linked lists (agent
3979 options, fqdn options and nwip options) that could cause memory
3980 corruption and core dumps.
3982 - Fix a bug in DHCPREQUEST handling that resulted in DHCPNAK messages
3983 not being send in some cases when they were needed.
3985 - Make the lease structure somewhat more compact.
3987 - Make initial failover startup *much* faster. This was researched
3988 and implemented by Damien Neil.
3990 - Add a --version flag to all executables, which prints the program
3991 name and version to standard output.
3993 - Don't rewrite the lease file every thousand leases.
3995 - A bug in nit.c for older SunOS machines was fixed by a patch sent in
3996 by Takeshi Hagiwara.
3998 - Fix a memory corruption bug in the DHCP client.
4000 - Lots of documentation updates.
4002 - Add a feature allowing environment variables to be passed to the
4003 DHCP client script on the DHCP client command line.
4005 - Fix client medium support, which had been broken for some time.
4007 - Fix a bug in the DHCP client initial startup backoff interval, which
4008 would cause two DHCPDISCOVERS to be sent back-to-back on startup.
4010 Changes since 3.0 Beta 2 Patchlevel 15
4012 - Some documentation tweaks.
4014 - Maybe fix a problem in the DLPI code.
4016 - Fix some error code space inconsistencies in ddns update code.
4018 - Support relay agents that intercept unicast DHCP messages to stuff
4019 agent options into them.
4021 - Fix a small memory leak in the relay agent option support code.
4023 - Fix a core dump that would occur if a packet was sent with no
4026 Changes since 3.0 Beta 2 Patchlevel 14
4028 - Finish fixing a long-standing bug in the agent options code. This
4029 was causing core dumps and failing to operate correctly - in
4030 particular, agent option stashing wasn't working. Agent option
4031 stashing should now be working, meaning that agent options can be
4032 used in class statements to control address allocation.
4034 - Fix up documentation.
4036 - Fix a couple of small memory leaks that would have added up
4037 significantly in a high-demand situation.
4039 - Add a log-facility configuration parameter.
4041 - Fix a compile error on some older operating systems.
4043 - Add the ability in the client to execute certain statements before
4044 transmitting packets to the server. Handy for debugging; not much
4045 practical use otherwise.
4047 - Don't send faked-out giaddr when renewing or bound - again, useful
4050 Changes since 3.0 Beta 2 Patchlevel 13
4052 - Fixed a problem where the fqdn decoder would sometimes try to store
4053 an option with an (unsigned) negative length, resulting in a core
4054 dump on some systems.
4056 - Work around the Win98 DHCP client, which NUL-terminates the FQDN
4059 - Work around Win98 and Win2k clients that will claim they want to do
4060 the update even when they don't have any way to do it.
4062 - Fix some log messages that can be printed when failover is operating
4063 that were not printing enough information.
4065 - It was possible for a DHCPDISCOVER to get an allocation even when
4066 the state machine said the server shouldn't be responding.
4068 - Don't load balance DHCPREQUESTs from clients in RENEWING and
4069 REBINDING, since in RENEWING, if we heard it, it's for us, and in
4070 REBINDING, the client wouldn't have got to REBINDING if its primary
4073 - When we get a bogus state lease binding state transition, don't do
4077 Changes since 3.0 Beta 2 Patchlevel 12
4079 - Fixed a couple of silly compile errors.
4081 Changes since 3.0 Beta 2 Patchlevel 11
4083 - Albert Herranz tracked down and fixed a subtle bug in the base64
4084 decoder that would prevent any key with an 'x' in its base64
4085 representation from working correctly.
4087 - Thanks to Chris Cheney and Michael Sanders, we have a fix for the
4088 hang that they both spotted in the DHCP server - when
4089 one-lease-per-client was set, the code to release the "other" lease
4092 - Fix a problem with alignment of the input buffer in bpf in cases
4093 where two packets arrive in the same bpf read.
4095 - Fix a problem where the relay agent would crash if you specified an
4096 interface name on the command line.
4098 - Add the ability to conditionalize client behaviour based on the
4101 - Add support for the FQDN option, and added support for a new way of
4102 doing ddns updates (ddns update style interim) that allows more than
4103 one DHCP server to update the DNS for the same network(s). This
4104 was implemented by Damien Neil with some additional functionality
4107 - Damien added a "log" statement, so that the configuration file can
4108 be made to log debugging information and other information.
4110 - Fixed a bug that caused option buffers not to be terminated with an
4113 - Fixed a long-standing bug in the support for option spaces where the
4114 options are stored as an ordered list rather than in a hash table,
4115 which could theoretically result in memory pool corruption.
4117 - Prevent hardware declarations with no actual hardware address from
4118 being written as something unparsable, and behave correctly in the
4119 face of a null hardware address on input.
4121 - Allow key names to be FQDNs, and qualify the algorithm name if it is
4122 specified unqualified.
4124 - Modify the DDNS update code so that it never prints the "resolver
4125 failed" message, but instead says *why* the resolver failed.
4127 - Officially support the subnet selection option, which now has an
4130 - Fix a build bug on MacOS X.
4132 - Allow administrator to disable ping checking.
4134 - Clean up dhcpd.conf documentation and add more information about how
4137 Changes since 3.0 Beta 2 Patchlevel 10
4139 - Fix a bug introduced during debugging (!) and accidentally committed
4142 Changes since 3.0 Beta 2 Patchlevel 9
4144 - Fix DHCP client handling of vendor encapsulated options.
4146 - Fix a bug in the handling of relay agent information options introduced
4149 - Stash agent options on client leases by default, and use the stashed
4150 options at renewal time.
4152 - Add the ability to test the client's binding state in the client
4153 configuration language.
4155 - Fix a core dump in the DNS update code.
4157 - Fix some expression evaluation bugs that were causing updates to be
4158 done when no client hostname was received.
4160 - Fix expression evaluation debugging printfs.
4162 - Teach pretty_print_option to print options in option spaces other than
4163 the DHCP option space.
4165 - Add a warning message if the RHS of a not is not boolean.
4167 - Never select for more than a day, because some implementations of
4168 select will just fail if the timeout is too long (!).
4170 - Fix a case where a DHCPDISCOVER from an unknown network would be
4173 - Fix a bug where if a client requested an IP address for which a different
4174 client had the lease, the DHCP server would reallocate it anyway.
4176 - Fix the DNS update code so that if the client changes its name, the DNS
4177 will be correctly updated.
4179 Changes since 3.0 Beta 2 Patchlevel 8
4181 - Oops, there was another subtle math error in the header-length
4184 Changes since 3.0 Beta 2 Patchlevel 7
4186 - Oops, forgot to byte-swap udp header length before bounds-checking it.
4188 Changes since 3.0 Beta 2 Patchlevel 6
4190 - Fix a possible DoS attack where a client could cause the checksummer
4191 to dump core. This was a read, not a write, so it shouldn't be
4192 possible to exploit it any further than that.
4194 - Implement client- and server-side support for using the Client FQDN
4197 - Support for other option spaces in the client has been added. This
4198 means that it is now possible to define a vendor option space on the
4199 client, request options in that space from the server (which must
4200 define the same option space), and then use those options in the
4201 client. This also allows NWIP and Client FQDN options to be used
4204 - Add object initializer support. This means that objects can now be
4205 initialized to something other than all-zeros when allocated, which
4206 makes, e.g., the interface object support code a little more robust.
4208 - Fix an off-by-one bug in the host stuffer. This was causing host
4209 deletes not the work, and may also have been causing OMAPI
4210 connections to get dropped. Thanks to James Brister for tracking
4213 - Fixed a core dump in the interface discovery code that is triggered
4214 when there is no subnet declaration for an interface, but the server
4215 decides to continue running. Thanks to Shane Kerr for tracking
4216 down and fixing this problem.
4218 Changes since 3.0 Beta 2 Patchlevel 5
4220 - Fix a bug in the recent enhancement to the interface discovery code
4221 to support arbitrary-length interface lists.
4223 - Support NUL-terminated DHCP options when initializing client-script
4226 - Fix suffix operator.
4228 - Fix NetWare/IP option parsing.
4230 - Better error/status checking in dhcpctl initialization and omapi
4233 - Fix a potential memory smash in dhcpctl code.
4235 - Fix SunOS4 and (maybe) Ultrix builds.
4237 - Fix a bug where a certain sort of incoming packet could cause a core
4238 dump on Solaris (and probably elsewhere).
4240 - Add some more safety checks in error logging code.
4242 - Add support for ISC_R_INCOMPLETE in OMAPI protocol connection code.
4244 - Fix relay agent so that if an interface is specified on the command
4245 line, the relay agent does not dump core.
4247 - Fix class matching so that match if can be combined with match or
4250 - Do not allow spurious leases in the lease database to introduce
4251 potentially bogus leases into the in-memory database.
4253 - Fix a byte-order problem in the client hardware address type code
4256 - Be slightly less picky about what sort of hardware addresses OMAPI
4257 can install in host declarations.
4259 Changes since 3.0 Beta 2 Patchlevel 4
4261 - Incorporated Peter Marschall's proposed change to array/record
4262 parsing, which allows things like the slp-agent option to be encoded
4263 correctly. Thanks very much to Peter for taking the initiative to
4264 do this, and for doing such a careful job of it (e.g., updating the
4267 - Added an encoding for the slp-agent option. :')
4269 - Fixed SunOS 4 build. Thanks to Robert Elz for responding to my
4270 request for help on this with patches!
4272 - Incorporated a change that should fix a problem reported by Philippe
4273 Jumelle where when the network connection between two servers is
4274 lost, they never reconnect.
4276 - Fix client script files other than that for NetBSD to actually use
4277 make_resolv_conf as documented in the manual page.
4279 - Fix a bug in the packet handling code that could result in a core
4282 - Fix a bug in the bootp code where responses on the local net would
4283 be sent to the wrong MAC address. Thanks to Jerry Schave for
4286 Changes since 3.0 Beta 2 Patchlevel 3
4288 - In the DHCP client, execute client statements prior to using the values
4289 of options, so that the client configuration can overridden, e.g., the
4292 - Fix a reference counting error that would result in very reproducible
4293 failures in updates, as well as occasional core dumps, if a zone was
4294 declared without a key.
4296 - Fix some Linux 2.0 compilation problems.
4298 - Fix a bug in scope evaluation during execution of "on" statements that
4299 caused values not to be recorded on leases.
4301 - If the dhcp-max-message-size option is specified in scope, and the
4302 client didn't send this option, use the one specified in scope to
4303 determine the maximum size of the response.
4305 Changes since 3.0 Beta 2 Patchlevel 2
4307 - Fix a case where spawning subclasses were being allocated
4308 incorrectly, resulting in a core dump.
4310 - Fix a case where the DHCP server might inappropriately NAK a
4313 - Fix a place dhcprequest() where static leases could leak.
4315 - Include memory.h in omapip_p.h so that we don't get warnings about
4318 Changes since 3.0 Beta 2 Patchlevel 1
4320 - Notice when SIOCFIGCONF returns more data than fit in the buffer -
4321 allocate a larger buffer, and retry. Thanks to Greg Fausak for
4324 - In the server, if no interfaces were configured, report an error and
4327 - Don't ever record a state of 'startup'.
4329 - Don't try to evaluate the local failover binding address if none was
4330 specified. Thanks to Joseph Breu for finding this.