1 Internet Systems Consortium DHCP Distribution
9 Please note that that ISC DHCP is now licensed under the Mozilla Public License,
10 MPL 2.0. Please see https://www.mozilla.org/en-US/MPL/2.0/ to read the MPL 2.0
13 The areas of focus for ISC DHCP 4.4 were:
15 1. Dynamic DNS additions
16 2. dhclient improvements
17 3. Support for dynamic shared libraries
19 Dynamic DNS Improvements:
21 - We added three new server configuration parameters which influence DDNS
24 1. ddns-dual-stack-mixed-mode - alters DNS conflict resolution behavior
25 to mitigate issues with non-compliant clients in dual stack environments.
27 2. ddns-guard-id-must-match - relaxes the DHCID RR client id matching
28 requirement of DNS conflict resolution.
30 3. ddns-other-guard-is-dynamic - alters dual-stack-mixed-mode behavior to
31 allow unguarded DNS entries to be overwritten in certain cases
33 - The server now honors update-static-leases parameter for static DHCPv6
36 dhclient Improvements:
38 - We've added three command line parameters to dhclient:
40 1. --prefix-len-hint - directs dhclient to use the given length as
41 the prefix length hint when requesting prefixes
43 2. --decline-wait-time - instructs the client to wait the given number
44 of seconds after declining an IPv4 address before issuing a discover
46 3. --address-prefix-len - specifies the prefix length passed by dhclient
47 into the client script (via the environment variable ip6_prefixlen) with
48 each IPv6 address. We added this parameter because we have changed the
49 default value from 64 to 128 in order to be compliant with RFC3315bis
50 draft (-09, page 64) and RFC5942, Section 4, point 1.
51 **WARNING**: The new default value of 128 may not be backwardly compatible
52 with your environment. If you are operating without a router, such as
53 between VMs on a host, you may find they cannot see each other with prefix
54 length of 128. In such cases, you'll need to either provide routing or use
55 the command line parameter to set the value to 64. Alternatively you may
56 change the default at compile time by setting DHCLIENT_DEFAULT_PREFIX_LEN
59 - dhclient will now generate a DHCPv6 DECLINE message when the client script
60 indicates a DAD failure
62 Dynamic shared library support:
64 Configure script, configure.ac+lt, which supports libtool is now provided
65 with the source tar ball. This script can be used to configure ISC DHCP
66 to build with libtool and thus use dynamic shared libraries.
70 - The server now supports dhcp-cache-threshold for DHCPv6 operations
71 - The server now supports DHPv6 address allocation based on EUI-64 DUIDs
72 - Experimental support for alternate relay port in the both the server
73 and relay for IPv4, IPv6 and 4o6 (see: draft-ietf-dhc-relay-port-10.txt)
75 For information on how to install, configure and run this software, as
76 well as how to find documentation and report bugs, please consult the
79 ISC DHCP uses standard GNU configure for installation. Please review the
80 output of "./configure --help" to see what options are available.
82 The system has only been tested on Linux, FreeBSD, and Solaris, and may not
83 work on other platforms. Please report any problems and suggested fixes to
86 ISC DHCP is open source software maintained by Internet Systems
87 Consortium. This product includes cryptographic software written
88 by Eric Young (eay@cryptsoft.com).
90 Changes since 4.4.1 (New Features)
92 - A new configuration parameter, ping-cltt-secs (v4 operation only), has
93 been added to allow the user to specify the number of seconds that must
94 elapse since CLTT before a ping check is conducted. Prior to this, the
95 value was hard coded at 60 seconds. Please see the server man pages for
96 a more detailed discussion.
99 - A new configuration parameter, ping-timeout-ms (v4 operation only),
100 has been added that allows the user to specify the amount of time
101 the server waits for a ping-check response in milliseconds rather
102 than in seconds (via ping-timeout). When greater than zero, the value
103 of ping-timeout-ms will override the value of ping-timeout. Thanks
104 to Jay Doran from Bluecat Networks for suggesting this feature.
107 - An experimental tool called, Keama (KEA Migration Assistant), which helps
108 translate ISC DHCP configurations to Kea configurations, is now included
112 Changes since 4.4.1 (Bug Fixes)
114 - Corrected a misuse of the BIND9 DDNS API which caused DDNS updates to be
115 carried out over TCP rather than UDP. The coding error was exposed by
116 migration to BIND9 9.11. Thanks to Jinmei Tatuya at Infoblox for
120 - Bind9 now defaults to requiring python to build. The Makefile for
121 building Bind9 when bundled with ISC DHCP was modified to turn off
125 - Corrected a dual-stack mixed-mode issue that occurs when both
126 ddns-guard-id-must-match and ddns-other-guard-is-dynamic
127 are enabled and that caused the server to incorrectly interpret
128 the presence of a guard record belonging to another client as
129 a case of no guard record at all. Thanks to Fernando Soto
130 from BlueCat Networks for reporting this issue.
133 - Corrected a compilation issue that occurred when building without DNS
134 update ability (e.g. by undefining NSUPDATE).
137 - Corrected an issue that was causing the server, when running in
138 DHPCv4 mode, to segfault when class lease limits are reached.
139 Thanks to Peter Nagy at Porion-Digital for reporting the matter
140 and submitting a patch.
143 - Made minor changes to eliminate warnings when compiled with GCC 9.
144 Thanks to Brett Neumeier for bringing the matter to our attention.
147 - Fixed potential memory leaks in parser error message generation
148 spotted by Coverity, CIDs: 1448191, 1448193, 1448194, 1448195
151 - Updated URL of IEEE oui.txt in contrib/dhcp-lease-list.pl. Thanks
152 to Tommy Smith for contributing the patch.
155 - Fixed define flags when using SO_BINDTODEVICE. Thanks to Joe LeVeque for
159 - Applied a patch from OpenBSD to always set the scope id of outbound
160 DHPCv6 packets. Note this change only applies when compiling under
161 OpenBSD. Thanks to Brad Smith at OpenBSD from bringing it to our
165 - Modified dhclient to not discard config file leases that are
166 duplicates of server-provided leases and to retain such leases
167 after they have been used as the fallback active lease and
168 DHCP service has been restored. This allows them to be used
169 more than once during the lifetime of a dhclient instance.
170 This applies to DHCPv4 operation only.
173 - Corrected a number of reference counter and zero-length buffer leaks.
176 - Closed a small window of time between the installation of graceful
177 shutdown signal handlers and application context startup, during which
178 the receipt of shutdown signal would cause a REQUIRE() assertion to
179 occur. Note this issue is only visible when compiling with
180 ENABLE_GENTLE_SHUTDOWN defined.
183 - Corrected a buffer overflow that can occur when retrieving zone
184 names that are more than 255 characters in length.
187 - The "d" domain name option format was incorrectly handled as text
188 instead of RFC 1035 wire format. Thanks to Jay Doran at BlueCat Networks
189 for reporting this issue.
192 - Improved the error message issued when a host declaration has both
193 a uid and a dhcp-client-identifier. Server configuration parsing will
194 now fail if a host declaration specifies more than one uid.
197 - Updated developer's documentation on building and running unit tests.
198 Removed support for --with-atf=bind as BIND9 no longer bundles in ATF
202 - Fixed a syntax error in ldap.c which cropped up under Ubuntu
203 18.04.1/gcc 7.4.0. Thanks to Charles Hedrick for pointing it out.
206 Changes since 4.4.0 (New Features)
208 Changes since 4.4.0 (Bug Fixes)
210 - A delayed-ack value of 0 (the default), now correctly disables the delayed
211 feature. A change in 4.4.0 prohibited lease updates marking leases active
212 from be written to the lease file when delayed-ack is 0. This in turn,
213 caused servers to lose active lease assignments upon restart.
216 ! Option reference count was not correctly decremented in error path
217 when parsing buffer for options. Reported by Felix Wilhelm, Google
222 ! Corrected an issue where large sized 'X/x' format options were causing
223 option handling logic to overwrite memory when expanding them to human
224 readable form. Reported by Felix Wilhelm, Google Security Team.
228 - Added use of new Bind9 compatibility header files, that are now necessary
229 to supply type definitions for primitive data types, removed from Bind9
230 proper. Altered util/bind.sh to pull from Bind9 repo on gitlab.
234 Changes since 4.4.0b1 (New Features)
236 - Duplicate address detection when binding to a new IPv6 address was added
237 to the following dhclient scripts: linux,freebsd,netbsd,openbsd, and macos.
238 The scripts will check for DAD errors after binding to a new IPv6 address
239 for at most --dad-wait-time seconds. If a DAD error is detected the script
240 will exit with a value of 3, instructing dhclient to decline the address. If
241 dad-wait-time is zero (the default), DAD error checking is not peformed.
244 - Support for sending and receiving additional DHCP4 options has been added
245 to both the dhcpd and dhclient. Specifically: option codes 93,94, and 97
246 (RFC 4578); code 150 (RFC 5859); and codes 209,219, and 211 (RFC 5071).
247 Beyond configuring, sending, requesting, and receiving these options neither
248 server nor client apply any additional logic based on their values.
249 Thanks to Peter Lewis for requesting this change.
252 Changes since 4.4.0b1 (Bug Fixes)
254 - Added clarifying text to dhcpd.conf.5 explaining the class match expressions
255 cannot rely on the results of executable statements.
258 - Fixed a bug which causes dhcpd and dhclient to crash on certain
259 systems when given relative path names for lease or pid files on
260 the command line. Affected systems are those on which the C library
261 function, realpath() does not support a second parameter value of
262 NULL (see manpages for realpath(3)).
265 - Fixed a build issue when building with embedded BIND9 under OpenBSD that
266 was causing BIND9 build to not generate dns/enumclass.h and dns/enumtype.h.
269 - Added <dhcp>/m4/README to the distribution tarball. Some versions of
270 ac_local() treat the absence of the m4 subdirectory as error rather than
271 warning. This was causing the call to autoreconf, necessary for building
272 with libtool, to fail.
275 Changes since 4.4.0a1 (New Features)
277 - Added experimental support for relay port (draft-ietf-dhc-relay-port-10.txt)
278 feature for DHCPv4, DHCPv6 and DHCPv4-over-DHCPv6. Relay port has to be
279 enabled at compile time via --enable-relay-port and is fully backward
280 compatible (i.e. works with previous implementations of servers and relays
281 using the standard ports). A new --rp <relay-port> command line option
282 specifies to dhcrelay an alternate source port for upstream (i.e. toward
283 the server) messages. Thanks to Naiming Shen and Enke Chen of Cisco
284 systems for submitting these patches.
287 - Added --release-on-roam to dhcpd server. When enabled and the server detects
288 that a DHCPv6 client (IAID+DUID) has roamed to a new network, it will release
289 the pre-existing leases on the old network and emit a log statement similar
292 "Client: <id> roamed to new network, releasing lease: <address>"
294 The server will carry out all of the same steps that would normally occur
295 when a client explicitly releases a lease. This behavior is disabled by
296 default and may only be specified globally. Prior to this the server renders
297 the leases unavailable until they expire or the server is restarted. Clients
298 that need leases in multiple networks must supply a unique IAID in each IA.
299 When release-on-roam is disabled (the default) the server maintains the
300 prior behavior of making such leases unavailable until they expire or the
301 server is restarted. Clients that need leases in multiple networks must
302 supply a unique IAID in each IA. This parameter may only be specified at
303 the global level. Thanks to Fernando Soto from BlueCat Networks for
304 suggesting this change.
308 - Support for delayed-ack is now compiled in by default. Prior to this
309 it had to be enabled at compile time via --enable-delayed-acks. The
310 default value for delayed-ack, however, has been changed from 28 to 0
311 (i.e. disabled). This was done to minimize the impact on users not
312 currently using the feature. Please note that the delayed-ack feature
313 is not currently compatible with support for DHPCv4-over-DHCPv6 so
314 when a 4to6 port command line argument enables this in the server the
315 delayed-ack value is reset to 0.
318 - The server (-6) now honors the parameter, update-static-leases, for static
319 (fixed-address6) DHCPv6 leases. It is worth noting that because stateful
320 data is not retained by the server for static leases, each time a client
321 requests or renews a static lease, the server will perform DDNS updates for
322 it. This may have significant performance implications for environments
323 with many clients that request or renew static leases often. Similarly,
324 the DNS entries will not be removed by server when a client issues a RELEASE
325 nor if the lease is deleted from the configuration. In such cases the DNS
326 entries must be removed manually. This feature is disabled by default.
327 Thanks to both Bill Shirley and dgutier-at-cern-dot-ch for requesting
333 - Added to the server (-6) a new statement, local-address6, which specifies
334 the source address of packets sent by the server. An additional flag,
335 bind-local-address6, disabled by default, binds the service socket to
336 to local-address6. Note that bind-local-address does not work with direct
337 clients: a relay has to forward packets to the server using the
338 local-address6 destination.
341 Changes since 4.4.0a1 (Bugs)
343 - The server now recognizes environment variables PATH_DHCPD_DB and
344 PATH_DHCPD_PID. These had been incorrectly compiled out of the code
345 unless DHCPv6 support was disabled. Additionally, the server man
346 pages were corrected to accurately reflect how the server chooses
347 file names (see lease-file-name and pid-file-name statements). Thanks
348 to Fernando Soto at Bluecat Networks for bringing this matter to our
352 - Removed an "Impossible condition" error upon exit in the dhcpd server that
353 has been shutdown via OMAPI. This condition was only apparent under Solaris
354 when building with --enable-use-sockets and --enable-ipv4-pktinfo.
357 - Corrected some minor Coverity issues: CID 1426059, 1426058, and 1426057.
360 - Added missing text to dhclient.8 and expanded release note coverage
361 for --address-prefix-len changes.
363 Changes since 4.3.6 (New Features)
365 - Added --enable-bind-install to install embedded bind includes and
366 libraries. Default is to not install them (it was the previous
367 behavior). If you'd like to change the includedir and/or libdir
368 installation directories to something different than for ISC DHCP
369 you must pass them using the --with-bind-extra-config configuration
373 - Added support of dynamic shared libraries with libtool. A new
374 --enable-libtool configuration parameter is available but
375 should not be used directly: *please* read the build configuration
376 section in the README file for the recommended procedure.
379 - IPv6 operation now supports an EUI-64 based address allocation which will
380 calculate addresses for clients with EUI-64 DUIDs based on those DUIDs when
381 enabled by setting use-eui-64 true. The parameter may defined down to the
382 pool scope. Note this feature must be compiled in by defining EUI_64 in
383 includes/site.h. This flag is undefined by default.
386 - The directory includes/isc-dhcp and it's only occupant, dst.h, have
387 been removed from the source tree. They are obsolete for branches
391 - Replaced ISC licensing with Mozilla Public License, MPL 2.0 licensing
392 throughout. Please see https://www.mozilla.org/en-US/MPL/2.0/ to read
393 the MPL 2.0 license terms.
396 - Load balancing for failover peers can now be disabled by setting
397 "load balance max secs" to 0. Doing so for both peers means both
398 servers will respond to all DHCPDISCOVERs or DHCPREQUESTs as soon as
402 - Added a new dhclient command line parameter, --prefix-len-hint <length>.
403 When used in conjunction with -P, it directs dhclient to use the given
404 length as the prefix length hint when requesting prefixes. Thanks to both
405 Indy, of the FireballISO open source project and H. Peter Anvin for
406 suggesting this change.
412 - dhclient will now wait for 10 seconds after declining an IPv4 address
413 before issuing a discover. This is in keeping with RFC 2131, section 3.1.5.
414 Prior to this dhclient did not wait at all. The amount of time dhclient
415 waits can be specified via a new command line parameter:
416 --decline-wait-time <seconds>. A value of zero equates to no wait at all.
417 Thanks to Pavel Kankovsky for bringing this matter to our attention.
418 **NOTE: THIS IS CHANGE IN DEFAULT BEHAVIOR.
421 - dhclient will now include the lease address when logging DHCPOFFERs,
422 DHCPREQUESTs, DHCPACKs, DHCPRELEASEs, and DHCPDECLINEs. Additionally,
423 DHCPOFFERs will be logged before their corresponding DHCPREQUESTs are
427 - When given the -T command line argument, in addition to reading the
428 current lease file, the server will write the leases to a temporary
429 lease file. This can help detect issues in server configuration that
430 only surface when leases are written to the file. The current lease
431 file will not be modified and the temporary lease file is removed upon
432 completion of the test.
435 - dhclient will now generate a DHCPv6 DECLINE message containing all IA_NA
436 addresses which for which the client script indicates a DAD failure. After
437 receiving the DECLINE reply, dhclient will restart the solicit process.
438 Note, the client script must exit with a value of 3 to signify that the
439 address failed DAD. Thanks to Jiri Popelka of Red Hat for submitting the
440 patch that was the foundation for this change.
441 **NOTE: THIS IS CHANGE IN DEFAULT BEHAVIOR.
446 - Replaced compilation option, enable-secs-byteorder, with a run-time, server
447 configuration parameter, check-secs-byte-order. When enabled, the
448 server will check for clients that do the byte ordering on the secs field
449 incorrectly. This field should be in network byte order but some clients
450 get it wrong. When this parameter is enabled the server will examine the
451 secs field and if it looks wrong (high byte non zero and low byte zero) swap
452 the bytes. The default is disabled. This parameter is only useful when
453 doing load balancing within failover.
456 - The default value for server (-6) parameter, prefix-length-mode, has been
457 changed from "exact" to "prefer". In "prefer" mode the server will offer
458 the first available prefix with the same length as that requested by the
459 client. If none are found then it will offer the first available prefix of
460 any length. This is more in line with with RFC 8168 and should improve
461 the out-of-the-box user experience.
462 **NOTE: THIS IS CHANGE IN DEFAULT BEHAVIOR.
465 - Added support for 'dhcp-cache-threshold' to IPv6 operation: If a client
466 renews before 'dhcp-cache-threshold' percent of its lease has elapsed
467 (default 25%), the server will reuse the allocated lease (provide a
468 lease within the currently allocated lease-time) rather than extend or
469 renew the lease. This allows the server to reply without needlessly
470 writing leases to disk. The preferred and valid lease lifetimes
471 sent to the client will be reduced by the age of the lease. The option
472 may be specified down to the pool level and is supported for all three
473 pool types: NA, TA, and PD.
476 - Added three new server configuration parameters which influence DDNS:
477 1. ddns-dual-stack-mixed-mode - alters DNS conflict resolution behavior
478 to mitigate issues with non-compliant clients in dual stack environments.
480 2. ddns-guard-id-must-match - relaxes the DHCID RR client id matching
481 requirement of DNS conflict resolution.
483 3. ddns-other-guard-is-dynamic - alters dual-stack-mixed-mode behavior to
484 allow unguarded DNS entries to be overwritten in certain cases
489 - A "key-algorithm <algorithm>" statement has been added to omshell to
490 allow the specification of the key algorithm to use during transaction
491 authentication. Prior to this it was hard-coded to be hmac-md5. It now
492 supports all of the same algorithms as the dhcpd server: hmac-md5 (the
493 default), hmac-sha1, hmac-sha224, hmac-sha256, hmac-sha384, and hmac-sha512.
496 - Added a server configuration parameter, persist-eui-64-leases, which
497 determines whether or not EUI-64 based leases are written to the
498 leases file. Default is true.
501 - Changed the default value of the prefix length passed by dhclient into the
502 client script for each IPv6 address from 64 to 128. This was done to comply
503 with RFC3315bis draft (-09, page 64) and RFC5942, Section 4, point 1.
504 In addition, dhclient now supports a command line argument,
505 --address-prefix-len, which may be used to override the default value.
506 **WARNING**: This change may not be backwardly compatible with your
507 environment. If you are operating without a router, such as between VMs on
508 a host, you may find they cannot see each with prefix length of 128. In
509 such cases, you'll need to either provide routing or use the command line
510 parameter to set the value to 64. Alternatively you may change the default
511 at compile time by setting DHCLIENT_DEFAULT_PREFIX_LEN in includes/site.h.
515 - Modified dhclient (-6) to bypass sending a confirm (INIT REBOOT) when it has
516 only expired address associations. Thanks to Jiri Popelka at Red Hat for
517 raising the issue and submitting the patch.
519 Changes since 4.3.6 (Bugs):
521 - Corrected an issue where the server would return a client's previously
522 released prefix lease even when the client provides a prefix length
523 hint that does not match the prior lease. Now the server will only
524 return the previous lease if it exactly matches the hint. If not
525 it will attempt to allocate a new prefix based on the hint and the
526 prefix-length-mode. Thanks to Tim DeNike - Lightspeed Communications
527 for pointing out the error of our ways.
530 - Added explicit include of BIND9 isc/util.h to adapt to revisions
531 in BIND9 (see BIND9 ticket #46311). Prior to this the build was failing
532 with implicit function declarations errors for POST() and INSIST().
535 - Added to code ignore empty IPv4 host name option (code 12). While RFC 2132
536 states the option cannot be empty, some clients are apparently capable of
537 sending it. Prior to this the server was attempting to use it and store it
538 in the lease file causing issues with DDNS and so forth.
541 - Corrected dhclient command line parsing for --dad-wait-time that causes
542 even valid values to fail as invalid on some environments.
545 - Replaced iasubopt::heap_index with separate values for active and inactive
546 heaps: iasubopt::active_index and iasubopt::inactive_index. This was done
547 to accommodate a change in behavior in BIND9 isc_heap_delete().
550 ! Plugged a socket descriptor leak in OMAPI, that can occur when there is
551 data pending to be written to an OMAPI connection, when the connection
552 is closed by the reader. Thanks to Pavel Zhukov at RedHat for bringing
553 this issue to our attention and whose patch helped guide us in the right
557 - The ability of the server to send back dhcp6.vendor-opts values has been
558 restored. A change in 4.3.5 (see #29246) which enabled it to send back the
559 FQDN option unfortunately broke its ability send back dhcp6.vendor-opts.
560 Thanks to Sumant Gupta (sumantgupta at gmail dot com) of Landis+Gry for
561 bringing this issue to our attention.
564 Changes since 4.3.6b1
570 - The server now allows the client identifier (option 61) to own leases
571 in more than one subnet concurrently. Prior to this the server would
572 incorrectly release an existing lease in one subnet prior to assigning
573 a lease in another subnet. Note that the prior behavior can be still
574 be achieved by enabling one-lease-per-client. Thanks to both David Zych at
575 the University of Illinois and Norm Proffitt of Infoblox for reporting
576 the issue; and Norm for suggesting a solution.
579 - When replying to a DHCPINFORM, the server will now include options specified
580 at the pool scope, provided the ciaddr field of the DHCPINFORM is populated.
581 Prior to this the server only evaluated options down to the subnet scope.
582 Thanks to Fernando Soto at BlueCat Networks for reporting the issue.
586 - When memory allocation fails in a repeated way the process writes
587 "Run out of memory." on the standard error and exists with status 1.
590 - The new lmdb (Lightning Memory DataBase) bind9 configure option is
591 now disabled by default to avoid the presence of this library to be
592 detected which can lead to a link failure.
595 - The linux interface discovery code has been modified to use getifaddrs()
596 as is done for BSD and OS-X. Prior to this the code would only recognize
597 the first address on an interface and thereby omit vlans.
598 Thanks to Jiri Popelka at Redhat, Marius Tomaschewski at SUSE, and Wei
599 Kong at Novell, who all submitted patches.
606 - Fixed a bug in OMAPI that causes omshell to crash when a name-value
607 pair with a zero length value is shipped in an object. Thanks to
608 Fernando Soto at BlueCat Networks for reporting the issue and
612 - On 64-bit platforms, dhclient now generates the correct value for the
613 script environment variable, "expiry", the lease expiry value exceeds
614 0x7FFFFFFF. Prior to this such values would produce negative values
615 for expiry in the script environment.
618 - Common timer logic was modified to cap the maximum timeout values at
619 0x7FFFFFFF - 1. Values larger than that were causing fatal timer out of
620 range errors on 64-bit platforms. Thanks to Jiri Popelka at Red Hat for
624 - DHCP6 FQDN option unpacking code now correctly handles values that contain
625 spaces, special, or non-printable characters. Prior to this the buffer
626 size needed was underestimated causing a conversion error message to
627 be logged and DNS updates to be skipped. Thanks to Fernando Soto at
628 BlueCat Networks for bringing the matter to our attention.
631 - When running in -6 mode, dhclient can enforce the require option statement
632 and will discard offered leases that do not contain all the required
633 options specified in the client configuration. If not enabled the client
634 will still consider such leases. This must be enabled at compile time
635 (see ENFORCE_DHCPV6_CLIENT_REQUIRE in includes/site.h). Thanks to
636 Mritunjaykumar Dubey at Nokia for reporting the issue.
639 - Altered DHCPv4 lease time calculation to avoid roll over errors on 64-bit
640 OS systems when using -1 or large values for default-lease-time. Rollover
641 values will be replaced with 0x7FFFFFFF - 1. This alleviates unintentionally
642 short expiration times being handed out when infinite lease times (-1) in
643 conjunction with failover. Our thanks to Alessandro Gherardi for bringing
644 the issue to our attention.
647 - Added new compile time option --with-srv-conf-file which specifies a
648 default location of the server configuration file.
651 - Added --dad-wait-time parameter to dhclient. It specifies the maximum time,
652 in seconds, that the client process should wait for the duplicate address
653 detection to complete before initiating DHCP requests. This value is
654 propagated to the dhclient script and the script is responsible for waiting
655 the specified amount of time or until DAD has completed. If the script does
656 not support it, specifying this parameter has no effect. The default value
657 is 0 which specifies that the script should not wait for DAD. With this
658 change the following scripts have been modified to support the new parameter:
659 freebsd, linux, macos, netbsd, openbsd.
662 - The server nows checks both the address and length of a prefix delegation
663 when attempting to match it to a prefix pool. This ensures the server
664 responds properly when pool configurations change such that once valid,
665 "in-pool" delegations are now treated as being invalid. During lease
666 file loading at startup, the server will discard any PD leases that
667 are deemed "out-of-pool" either by address or mis-matched prefix length.
668 Clients seeking to renew or rebind such leases will get a response of
669 No Binding in the case of the former, and the prefix delegation with
670 lifetimes set to zero in the case of the latter. Thanks to Mark Nejedlo
671 at TDS Telecom for reporting this issue.
674 - Modified DDNS support initialization such that DNS related ports will only be
675 opened by the server (dhcpd) at startup if ddns-update-style is not "none";
676 by dhclient only if and when the it first attempts an update; and never by
677 dhcrelay. Prior to this all three always did the initialization at startup
678 which causes them to always open on and listen for traffic on two random
679 ports. Thanks to Rodney Beede for reporting this issue.
683 - Added error logging to two memory allocation failure checks. Thanks to Bill
684 Parker (wp02855 at gmail dot com) for reporting the issue.
687 - Corrected a dhclient -6 issue that caused the client to crash with an
688 "Impossible condition" error after de-preferencing its only IA binding.
689 The crash occurred when server configuration changes rendered the existing
690 binding out-of-range and no other leases were available to offer. Thanks
691 to Pierre Clerissi for bringing this issue to our attention.
694 - By defining CALL_SCRIPT_ON_ONETRY_FAIL in includes/site.h, dhclient will
695 now call the script with reason set to FAIL when run with -1 (one try) and
696 there are no server responses. This applies to IPv4 mode only. Thanks for a
697 patch by Martin Pitt which got to us via Andrew Pollock.
700 - The server now detects failover peers that are not referenced in at least
701 one pool when run with the command line option for test mode, -T. Prior to
702 this the check was performed too far down stream to be detected in test mode.
705 - Linux script updated. The script is now based on Debian version. It uses
706 ip tool from iproute2 package and ifconfig is no longer used. This also
707 addresses an issue of calling arping with inappropriate parameter.
711 - Changed severity of the log message indicating UDP checksum errors in
712 the received packets from 'info' to 'debug' to avoid logging excessive
713 number of false positives when UDP checksum offloading is enabled.
716 - The directory minires has been removed from the source tree. It has
717 long been obsolete for branches other than v4_1_esv. Additionally,
718 includes/minires.h was renamed includes/ns_name.h.
721 - Replaced ifconfig parameters "add" and "delete" with "alias" and "-alias"
722 for IPv6 mode in the client scripts, netbsd and openbsd. This was
723 preventing IPv6 addresses from being added or removed from interfaces.
724 Thanks to Tim Dean for reporting this issue.
727 Changes since 4.3.5b1
729 - Corrected a bug which could cause the server to sporadically crash while
730 loading lease files with the lease-id-format is set to "hex". Our thanks
731 to Jay Ford, University of Iowa for reporting the issue.
734 - Eliminated a noisy, but otherwise harmless debug log statment that may
735 appear during server startup when building with --enable-binary-leases
736 and configuring multiple pools in a shared network. Thanks to Fernando
737 Soto from BlueCat Networks for reporting the issue and supplying a patch.
742 - Fixed util/bindvar.sh error handling.
745 - Correct error message in relay to use remote id length instead
746 of circuit id length.
749 - Add logic to test directory Makefiles to avoid copying Attfile(s)
750 when building within the source tree. This eliminates a noisy but
751 otherwise harmless error message when running "make check".
754 - Leases are now scrubbed of certain prior use information when pool
755 re-balancing reassigns them from one FO peer to the other. This
756 corrects an issue where leases that were offered but not used
757 by the client retained the client hostname from the original
758 client. Thanks to Pavel Polacek, Jan Evangelista Purkyne University
759 for reporting the issue.
762 - In the LDAP code and schema add some missing '6' characters to use
763 the v6 instead of the v4 versions. Thanks to Denis Taranushin for
764 reporting this issue and supplying its patch.
767 - Correct how the pick-first-value expression is written to a lease
768 file. Previously it was written as a concat expression due to
769 a cut and paste error.
772 - Modify the DDNS code to clean up the PTR record even if there
773 are issues while cleaning up the A or AAAA records.
776 - Added global configuration parameter, abandon-lease-time, which determines
777 the amount of time a lease remains abandoned. The default is 84600 seconds.
778 Additionaly, the server now conducts a ping check (if ping checks are
779 enabled) prior to offering an abandoned lease to client. Our thanks to
780 David Zych at University of Illinois for reporting the issue and working
781 with us to produce a viable solution.
784 - Correct handling of interface names during interface discovery. This
785 addresses an issue where interface names of 15 characters in length
786 could lead to crashes or interface recognition errors during startup
787 of dhcpd, dhclient, and dhcrelay.
790 - Updates to contrib/dhcp-lease-list.pl to make it more friendly.
791 The updates are: looking for the lease file in more places and skipping
792 the "processing complete" output when creating machine readable
793 output. Thanks to Cameron Paine (cbp at null dot net) for the
797 - When reusing a lease for dhcp-cache-threshold return the hostname
798 to the original lease. Also if the host pointer, UID or hardware address
799 change don't allow reuse of the lease.
800 Thanks to Michael Vincent for reporting this and helping us
801 verify the problem and fix.
804 - Change dmalloc to use a size_t as the length argument to bring it
805 in line with the call it will make to malloc().
808 - If the failover socket can't be bound, close it. Otherwise if the
809 user configures an incorrect address in the failover stanza the
810 server will continue to open new sockets every 90 seconds until
814 - Add DHCPv4-mode, dhcrelay command line options, "-iu" and "-id", that
815 allow interfaces to be upstream or downstream respectively. Upstream
816 interfaces will accept and forward only BOOTP replies, while downstream
817 interfaces will accept and forward only BOOTP requests.
820 - Clean up some memory references in the vendor-class construct.
823 Changes since 4.3.4b1
829 - Corrected a static analyzer warning in common/execute.c
832 - ISC DHCP now follows the common convention to use the base name a
833 program is invoked with (aka argv[0], vs. a builtin name) for
834 logs. This should help differentiate syslog entries for DHCPv4 and
835 DHCPv6 servers. You can define OLD_LOG_NAME in includes/site.h to
836 keep the previous behavior.
839 - The Linux packet filter code now correctly treats only the least significant
840 12 bits in an inbound packet's TCI value as the VLAN id (per IEEE 802.1Q).
841 Prior to this it was using the entire 16 bit value as the VLAN id and
842 incorrectly discarding packets. Thanks to Jiri Popelka at Red Hat for
843 reporting this issue and supplying its patch.
846 - Fixed several static analysis issues such as potential null
847 references, unchecked strdup returns. Thanks to Bill Parker (wp02855 at
848 gmail dot com) who identified these issues and supplied patches to
853 - Corrected compilation errors that prohibited building the server
854 and its ATF unit tests when failover is disabled.
857 - Added the lease address to the end of the debug level log message
858 emitted when an existing lease is renewed within the dhcp-cache-threshold.
859 Thanks to Nathan Neulinger at Missouri S&T for suggesting the change.
862 - Added dhcpv6 and delayed-ack to settings listed in the "Features:"
863 section of the configure script output. Additionally, all of the
864 features reported on will now always show either a "yes" or "no"
865 value. Prior to this features left to their default setting would
869 - Added a parameter, authoring-byte-order, to the lease file. This value
870 is automatically added to the top of new lease files by the server and
871 indicates the internal byte order (big endian or little endian) of the
872 server. This permits lease files generated on a server with one form of
873 byte order to be used on a server with the opposite form. Our thanks to
874 Timothe Litt for calling this to our attention and for the suggestions
878 - Fixed a small memory leak in the DHCPv6 version of the client code.
879 This is unlikely to cause significant issues in actual use.
882 - Corrected a few minor memory leaks in omapi's dereferencing of
883 host objects. Thanks to Jiri Popelka at Red Hat for reporting
884 the issue and supplying the patches.
888 - Cleaned up some of the Make infrastructure to make --with-libbind
889 work better. Though it still only works with an absolute path.
892 - Made the embedded bind libraries able to be cross compiled
893 (please refer to the bind9 documentation to learn how to cross
894 compile DHCP and its bind library dependency).
897 - Update the client code to better support getting IA_NAs and IA_PDs
898 in the same packet, see RFC7550 for some discussion.
901 ! Update the bounds checking when receiving a packet.
902 Thanks to Sebastian Poehn from Sophos for the bug report and a suggested
907 - When handling an incorrect command line for dhcpd, dhclient or dhcrelay
908 print out a specific error message about the first error in addition
909 to the usage string. This may be disabled by editing includes/site.h.
913 - The configure script will now exit with an error message if it cannot find
914 a GNU-style make tool (needed when building BIND libraries) or pkg-config
915 (needed to locate ATF used for building unit tests). Prior to this the
916 script would exit indicating success causing subsequent attempts to build
917 the software to fail.
920 - Properly terminate strings before passing them to regex and fix
921 a boundary error when creating certain new data strings.
922 Thanks to Andrey Jr. Melnikov for the bug report.
925 - Option expressions, such as prepend and append, are now supported when
926 running dhclient for IPv6. Prior to this such statements in the
927 client configuration file would be parsed but have no affect. Thanks
928 to Jiri Popelka at Red Hat for reporting the issue.
931 - A failover primary server will now accept a binding status update from the
932 secondary which transitions a lease from ACTIVE to ABANDONED. This accounts
933 for instances in which a client declines a lease and only the secondary
934 server receives it. Prior to this the primary server would reject such an
935 update as an "invalid state transition".
938 - Properly allocate memory for a bpf filter.
939 Thanks to Bill Parker (wp02855 at gmail dot com) who identified this issue.
942 - Updated contrib/dhcp-lease-list.pl to handle garbage in the oui file better
943 and to print out the hostnames a bit better.
944 Thanks to Antoine Beaupré from Debian for the suggested patch.
947 - The DHCPv6 server now handles long valid and preferred lease times better.
948 Values that would cause the internal end time of the lease to wrap are
949 modified to work as infinite.
952 - Updated support for cross compiling by allowing the library archiver
953 to be set at configure time via the environment variable 'AR'.
956 - The server will now match DHCPv6 relayed clients to host declarations
957 which include the "hardware" statement, if the relay connected to the
958 client supplies the client's hardware address via client-linklayer-address
959 option as per RFC 6939.
962 - Allow a filename to be specified instead of /dev/random during
963 configuration. This is passed to the BIND configuration to allow
964 for cross compilation.
967 - Add more option definitions.
970 - Correct outputting of long lines in the lease file when writing
971 a lease that includes long strings in an execute statement.
974 - The server will now correctly treat a lease as reserved when the client
975 requests an infinite lease time (i.e. OxFFFFFFFF) and "infinite-is-reserved"
976 is enabled. Prior to this the server would halt. In addition, corrections
977 were made to the server to allow a lease's flags field to be set via omapi.
978 Prior to this, the server, depending on the host architecture, would
979 incorrectly parse the new flags value from the omapi message.
982 - ISC DHCP can now be configured and built from a directory other than
983 the top level source directory. Note that "make distcheck" uses this
987 - Add support for RFC 3527 to dhcrelay. A new, dhcrelay command line argument,
988 "-U <interface>" enables the addition of a RFC 3527 compliant link selection
989 suboption to the agent option added for clients directly connected to the
994 - Add a new global DHCPv6 option, dhcpv6-set-tee-times, which when enabled
995 instructs the server to calculate T1 and T2 as recommended in RFC 3315,
999 - Corrected minor Coverity issues.
1002 - Add support for RFC 7341 DHCPv4 over DHCPv6 with a new configuration
1003 option "--enable-dhcpv4o6". Note this feature requires DHCPv6 support
1004 and is not compatible with delayed-ack. Both client and server use 2
1005 processes which communicate over UDP on a pair of sockets. The new
1006 "-4o6 <port>" command line argument enables DHCPv4 over DHCPv6 support
1007 and specifies the consecutive ports to use for inter-process communication.
1008 Please look at doc/DHCPv4-over-DHCPv6 for more details.
1011 - Correct interface name formation when using DLPI under Solaris 11. As of
1012 Solaris 11, ethernet device files are located in "/dev/net". The configure
1013 script has been modified to detect this situation and adjust the directory
1014 used accordingly. Thanks to Jarkko Torppa for reporting this issue and
1019 - Add a dereference call when handling an error condition while
1023 - Add a new parameter, lease-id-format, to both dhcpd and dhclient. The
1024 parameter controls the format in which certain values are written to lease
1025 files. Formats supported are octal - quoted string containing octal
1026 escapes, and hex - unquoted, colon separated hex digits. Thanks to
1027 Jay Ford, University of Iowa for bringing the issue to our attention.
1030 ! Add an option in site.h to limit the number of failover and control
1031 connections the server will accept. By default this is 200.
1035 Changes since 4.3.3b1
1041 - The server now does a better check to see if it can allocate the memory
1042 for large blocks of v4 leases and should provide a slightly better error
1043 message. Note well: the server pre-allocates v4 addresses, if you use
1044 a large range, such as a /8, the server will attempt to use a large
1045 amount of memory and may not start if there either isn't enough memory
1046 or the size exceeds what the code supports.
1049 - The server will now reject unicast Request, Renew, Decline, and Release
1050 messages from a client unless the server would have sent that client the
1051 dhcp6.unicast option. This behavior is in compliance with paragraph 1 in
1052 each of the sections 18.2,1, 18.2.3, 18.2.6, and 18.2.7 of RFC 3315. Prior
1053 to this, the server would simply accept the messages. Now, in order for
1054 the server to accept such a message, the server configuration must include
1055 the dhcp6.unicast option either globally or within the shared network to
1056 which the requested lease belongs. In other words, the server will map
1057 the first IA_XX address found within the client message to a shared-network
1058 and look for the presence of the unicast option there and then globally.
1059 Thanks to Jiri Popelka at Red Hat for this issue and his patch which
1063 - The ATF (Automated Testing Framework) tools used for optional unit tests
1064 can now be built from its embedded sources in bind, solving the
1065 atf-run / atf-report issue with recent (>= 0.20) versions of ATF.
1066 The new configuration option is "./configure --with-atf=bind".
1067 [ISC-Bugs #38754, #39300]
1069 - Corrected a compilation error introduced by the fix for ISC-Bugs #22806.
1070 On older linuxes that do not include the tpacket_auxdata structure don't
1071 bother allocating the cmsgbuf as it isn't necessary and we don't have
1072 a proper length for it.
1075 - Remove the dst directory. This was replaced in 4.2.0 with the dst
1076 code from the Bind libraries but we continued to include it for
1077 backwards compatibility. As we have now released 4.3.x it seems
1078 reasonable to remove it.
1081 - Write out the DUID server id on startup in all cases, previously if it
1082 was read in from server-duid option in the config or lease files for
1083 DHCPv4 it would not be written to the new lease file.
1086 - When parsing dates for leases convert dates past 2038 to "never".
1087 This avoids problems with integer overflows in the date and time
1088 handling code for people that decide to use very large lease times
1089 or add a lease entry with a date far in the future.
1092 - Leave the siaddr field clear when sending a NACK as per RFC 2131
1096 - In the client don't send expired addresses to the script as part of
1097 the binding process. Thanks to Sven Trenkel at Google for reporting
1098 the issue and suggesting the patch.
1101 - While parsing IPv6 addresses treat "add" as part of the address instead
1105 - Add support for accessing the v4 lease queues (active, free etc) in a
1106 binary fashion instead of needing to walk through a linear list to
1107 insert, find or remove an entry from the queues. In addition add a
1108 compile time option "--enable-binary-leases" to enable the new code
1109 or to continue using the old code. The old code is the default.
1110 Thanks to Fernando Soto from BlueCat Networks for the patch.
1113 - Delayed-ack now works properly with Failover. Prior to this, bind updates
1114 post startup were being queued but never delivered. Among other things, this
1115 was causing leases to not transition from expired or released to free.
1118 - Clean up parsing of v6 lease files a bit to avoid infinite loops if the
1119 lease file is corrupt in certain ways.
1122 - Corrected a crash in dhclient that occurs during lease renewal if the
1123 client is performing its own DNS updates. Thanks to Jiri Popelka at Red Hat
1127 - Corrected an issue in v6 lease file parsing. Prior to this, when encountering
1128 a lease with an address for which no configured pool exists, the server was
1129 declaring the lease file corrupt and incorrectly skipping over the subsequent
1130 entry in the file. The server will now emit a log message indicating that
1131 no pool was found for the address (or prefix) and correctly resume parsing
1132 with the next entry in the lease file. Our thanks to Michal Žejdl for
1133 reporting the issue.
1136 - Be more liberal in finding a subnet group associated with a static
1137 prefix. When we added the class matching code for v6 we also added
1138 a requirement that the static prefix must be within a subnet the
1139 client was in, in order to find the proper statements. We now
1140 look for a subnet based on the prefix, failing that on the static
1141 address for the client and failing that on the shared network
1145 - Add a new action expression "parse_vendor_options", which can be used
1146 to parse a vendor-encapsualted-option received by the server based on
1147 the encoding specified by the vendor-option-space statement.
1150 - Enhance the PARANOIA patch to include fchown() the lease file to
1151 allow it to be manipulated after the server does a chown().
1152 Thanks to Jiri Popelka at Red Hat for the patch.
1155 - Relax the requirement that prefix pools must be within the subnet.
1156 This was added in as part of #32453 in order to avoid configuration
1157 mistakes but is being removed as prefixes aren't required to be
1158 within the same subnet and many people configure them in that fashion.
1161 - Fixed a server crash that could occur when the server attempts to remove
1162 the billing class from the last lease billed to a dynamic class after said
1163 class has been deleted. Our thanks to Lasse Pesonen for reporting the
1167 - LDAP Patches - Numerous small patches submitted by contributors have
1168 been applied to the contributed code which supplies LDAP support.
1169 In addition, two larger submissions have also been included. The
1170 first adds support for IPv6 configuration and the second provides
1171 GSSAPI authentication. We would like to thank the following for their
1172 contributions (alphabetically):
1174 Bill Parker (wp02855 at gmail dot com)
1175 Jiri Popelka at Red Hat
1176 Marius Tomaschewski at SUSE
1177 (william at adelaide.edu.au), The University of Adelaide
1193 - Handle an out of memory condition in the client a bit better.
1194 Thanks to Frédéric Perrin from Brocade for finding the issue
1195 and suggesting a patch.
1198 Changes since 4.3.2rc2
1201 Changes since 4.3.2rc1
1203 - Corrected a compilation error introduced by the fix for ISC-Bugs #37415.
1204 The error occurs on Linux variants that do not support VLAN tag information
1205 in packet auxiliary data. The configure script now only enables inclusion
1206 of the VLAN tag-based logic if it is supported by the underlying OS.
1209 Changes since 4.3.2b1
1211 - Specifying the option, --disable-debug, on the configure script command line
1212 now disables debug features. Prior to this, specifying --disable-debug
1213 incorrectly enabled debug features. Thanks to Gustavo Zacarias for reporting
1217 - Unit test execution now uses a path augmented during configuration
1218 processing of the --with-atf option to locate ATF runtime tools, atf-run
1219 and atf-report. For most installations of ATF, this should alleviate the
1220 need to manually include them in the PATH, as was formerly required.
1221 If the configure script cannot locate the tools it will emit a warning,
1222 informing the user that the tools must be in the PATH when running unit
1224 Secondly, please note that "make check" will now exit with a failure status
1225 code (non-zero) if one or more unit tests fail. This means that invoking
1226 "make check" from an upper level directory will cause the make process to
1227 STOP after the first test subdirectory with failed test(s). To force all
1228 tests in all subdirectories to run, regardless of individual test outcome,
1229 use the command "make -k check".
1234 - Corrected parser's right brace matching when a statement contains an error.
1237 - TSIG-authenticated dynamic DNS updates now support the use of these
1238 additional algorithms: hmac-sha1, hmac-sha224, hmac-sha256, hmac-sha384,
1242 - Added check for invalid failover message type. Thanks to Tobias Stoeckmann
1243 working with the OpenBSD project who spotted the issue and provided the
1247 - Corrected rate limiting checks for bad packet logging. Thanks to Tobias
1248 Stoeckmann working with the OpenBSD project who spotted the issue and
1252 - Log statements depicting what files will be used by the server now occur
1253 after the configuration file has been processed.
1256 - Addressed Coverity issues reported as of 07-31-2014:
1257 [ISC-Bugs #36712] Corrects Coverity reported "high" impact issues.
1258 [ISC-Bugs #36933] Corrects Coverity reported "medium" impact issues
1259 [ISC-Bugs #37708] Fixes compilation error in dst_api.c seen in older
1260 compilers that was introduced by #36712
1262 - Server now supports a failover split value of 256.
1265 - Remove unneeded error #defines. These defines were included in case
1266 external programs required the older versions of the macro. They
1267 have been #ifdeffed for now and will be removed at a future date.
1268 See site.h for the #define to include them again, but you should
1269 switch to using the DHCP_R_* versions instead of the ISC_R_* versions.
1270 Also ISC_R_MULTIPLE has been removed as it is also defined in bind.
1273 - Added checks in range6 and prefix6 statement parsing to ensure addresses
1274 are within the declared subnet. Thanks to Jiri Popelka at Red Hat for the
1275 bug report and patch.
1282 - Addressed checksum issues:
1283 Added checksum readiness check to Linux packet filtering which eliminates
1284 invalid packet drops due to checksum errors when checksum offloading is
1285 in use. Based on dhcp-4.2.2-xen-checksum.patch made to the Fedora project.
1292 Inbound packets with UDP checksums of 0xffff now validate correctly rather
1297 - Added the echo-client-id configuration parameter to the server configuration.
1298 The server now supports RFC 6842 compliant behavior by setting a new
1299 configuration parameter, echo-client-id. When enabled, the server will
1300 include the client identifier option (Option code 61) if received, in its
1301 responses. The server identifier returned in NAKs (if enabled) will now
1302 be the globally defined value (if one) if the server cannot attribute the
1303 inbound request to a known subnet.
1307 - Added support of the configuration parameter, use-host-decl-names, to
1308 BOOTP request handling.
1311 - Added logic to ignore the signal, SIGPIPE, which ensures write failures
1312 will be delivered as errors rather than as SIGPIPE signals on all OSs.
1313 Thanks to Marius Tomaschewski from SUSE who reported the issue and provided
1314 the patch upon which the fix is based.
1317 - In the failover code, handle the case of communications being interrupted
1318 when the servers are dealing with POTENTIAL-CONFLICT. This patch allows
1319 the primary to accept the secondary moving from POTENTIAL-CONFLICT to
1320 RESOLUTION-INTERRUPTED as well as handling the bind update process better.
1321 In addition the code to resend update or update all requests has been
1322 modified to send requests more often.
1326 - By default, the server will now choose the value to use in the forward DNS
1327 name from the following in order of preference:
1329 1. FQDN option if provided by the client
1330 2. Host name option if provided by the client
1331 3. Configured option host-name if defined
1333 As before, this may be overridden by defining ddns-hostname to the desired
1334 value (or expression). In addition, the server logic has been extended to
1335 use the value of the host name declaration if use-host-decl-names is enabled
1336 and no other value is available.
1339 - DNS updates were being attempted when dhcp-cache-threshold enabled the use of
1340 the existing lease and the forward DNS name had not changed. This has been
1345 - Corrected an issue which caused dhclient to incorrectly form the result when
1346 prepending or appending to the IPv4 domain-search option, received from the
1347 server, when either of the values being combined contain compressed
1351 - Added the server-id-check parameter to the server configuration.
1352 This parameter allows run-time control over whether or not a server,
1353 participating in failover, verifies the dhcp-server-identifier option in
1354 DHCP REQUESTs against the server's id before processing the request.
1355 Formerly, enabling this behavior was done at compilation time through
1356 the use of the #define, SERVER_ID_CHECK, which has been removed from site.h
1357 The functionality is now only available through the new runtime parameter.
1360 - During startup, when the server encounters a lease whose binding state is
1361 FTS_BACKUP but whose pool has no configured failover peer, it will reset the
1362 lease's binding state to FTS_FREE. This allows the leases to be reclaimed
1363 by the server after a pool's configuration has changed from failover to
1364 standalone. Prior to this such leases would remain stuck in the backup state
1365 making them unavailable for assignment. Note this conversion will occur
1366 whether or not the server is compiled for failover.
1369 - Fixed a small issue in the treatment of hosts in the inform processing
1370 that could cause the response to an inform to include information from
1371 the wrong scope. The two examples we've heard of are getting subnet
1372 instead of group information associated with a host entry, or getting
1373 global information instead of subnet if the host entry was built via
1374 omapi. Thanks to Julien Soula at University of Lille for finding the
1375 bug and supplying a patch.
1378 - Avoid calling pool_timer() recursively from supersede_lease(). This could
1379 result in leases changing state incorrectly or delaying the running of the
1380 leae expiration code.
1383 - Move the check for a PID file and process to be before we rewrite the
1384 lease file. This avoids the possibility of starting a second instance
1385 of a server which changes the current lease file confusing the first
1386 instance. This check is only included if the admin hasn't disabled PID
1391 - In the client code change the way preferred_life and max_life are printed
1392 for environment variables to be unsigned rather than signed.
1393 Thanks to Jiri Popelka at Red Hat for the bug report and patch.
1396 - Modified Linux packet handling such that packets received via VLAN are now
1397 seen only by the VLAN interface. Prior to this, such packets were seen by
1398 both the VLAN interface and its parent (physical) interface, causing the
1399 server to respond to both. Note this remains an issue for non-Linux OSs.
1400 Thanks to Jiri Popelka at Red Hat for the patch.
1406 - Log content has been changed to more directly suggest that admins should
1407 check for multiple IPv6 clients attempting to use the same DUID when only
1408 abandoned addresses are available. Debug level logging will now emit counts
1409 of the total number of, in-use, and abandoned addresses in a shared subnet
1410 when the server finds no addresses available for a given DUID. Lastly,
1411 threshold logging is now automatically disabled for shared subnets whose
1412 total number of possible addresses exceeds (2^64)-1.
1416 - Added a global parameter, prefix-length-mode, which may be used to determine
1417 how the server uses a non-zero value for prefix-length supplied by clients
1418 when soliciting DHCPv6 prefixes. The server supports selection modes of:
1419 ignore, prefer, exact, minimum and maximum which are described in detail in
1420 the server man pages. The prior behavior of the server was to only offer a
1421 prefix whose length exactly matched the prefix-length value requested. If
1422 no such prefixes were available, the server returned a status of none
1423 available. Note the default mode, "exact", provides this same behavior.
1427 - Corrected inconsistencies in dhcrelay's setting the upper interface hop count
1428 limit such that it now sets it to 32 when the upstream address is a multicast
1429 address per RFC 3315 Section 20. Prior to this if the -u argument preceded
1430 the -l argument on the command line or if the same interface was specified
1431 for both; the logic to set the hop limit count for the upper interface was
1432 skipped. This caused the hop count limit to be set to the default value
1433 (typically 1) in the outbound upstream packets.
1436 Changes since 4.3.1b1
1438 - Modify the linux and openwrt dhclient scripts to process information
1439 from a stateless request. Thanks to Jiri Popelka at Red Hat for the
1440 bug report and patch.
1443 - Remove more unused RCSID tags. These weren't noticed in 4.3 as
1444 the code isn't used anymore but we remove them here to keep the
1445 code consistent across versions.
1450 - Tidy up several small tickets.
1451 Correct parsing of DUID from config file, previously the LL type
1452 was put in the wrong place in the DUID string.
1454 Add code to parse "do-forward-updates" as well as "do-forward-update"
1455 Thanks to Jiri Popelka at Red Hat.
1457 Remove log_priority as it isn't currently used.
1459 Increase the size of the buffer used for reading interface information.
1462 - Remove an extra set of the msg_controllen variable.
1465 - Add a more understandable error message if a configuration attempts
1466 to add multiple keys for a single zone. Thanks to a patch from Jiri
1470 - Fix some minor issues in the dst code.
1473 - Properly #ifdef functions so that the code can compile without NSUPDATE.
1476 - Update the partner's stos (start time of state, basically when we last
1477 heard from this partner) field when updating the state in failover.
1480 - Modify the overload processing to allow space for the remote agent ID.
1482 Handle the ordering of the SUBNET_MASK option even if it is the last
1486 - Remove the code that allows a server to follow RFC3315 instead of
1487 the subsequent errata from August 2010 when determining which IAs
1488 to include if no addresses will be assigned.
1491 - Remove unused RCSID tags.
1494 - Correct the v6 client timing code. When doing the timing backoff
1495 for MRT limit it to MRD.
1496 Thanks to Jiri Popelka at Red Hat for the bug report and fix.
1499 - Add a log entry when killing a client and remove the PID files
1500 when a server, relay or client are killed.
1504 - Some minor cleanups in the client code.
1505 In addition to checking for dhcpc check for bootpc in the services list.
1507 Correct the client code to only try to get a lease once when the
1508 given the "-1" argument.
1509 Thanks to Jiri Popelka at Red Hat for the bug report and fix.
1511 When asked for the version don't send the output to syslog.
1513 Add the next server information to the environment variables for
1514 use by the client script. In order to avoid changing the client
1515 lease file the next server information isn't written to it.
1516 Thanks to Tomas Hozza at Red Hat for the suggestion and a prototype fix.
1519 - Several updates to the dhcp server code.
1520 When not in quiet mode print out the files being used.
1522 As accessing some pid files may require privileges move the dropping
1523 of permission bits due to the paranoia patch to be after the pid code.
1524 Thanks to Jiri Popelka at Red Hat for the bug report and fix.
1526 When processing a "--version" request don't output the version information
1529 - Add the "enable-log-pid" build option to the configure script. When enabled
1530 this causes the client, server and relay programs to include the PID
1531 number in syslog messages.
1532 Thanks to Marius Tomaschewski for the suggestion and proto-patch.
1535 - Add a #define to specify the prefix length used when a client attempts
1536 to configure an address. This can be modified by editing includes/site.h.
1537 By default it is set to 64. While 128 might be a better choice it would
1538 also be a change for currently running systems, so we have left it at 64.
1541 - Add a run time option to the client "-df" to allow the administrator to
1542 point to a second lease file the client can search for a DUID. This can
1543 be used to allow a v4 and a v6 instance of the client to share a DUID.
1544 The second file will only be searched if there isn't a DUID in the main
1545 lease file and the DUID will be written out to the main lease file.
1548 - Have the client fsync the lease file to avoid lease corruption if the
1549 client hibernates or otherwise shuts down.
1552 - Add a check for L2VLAN in bpf.c to help support VLAN interfaces
1553 Thanks to Steinar Haug for the suggestion.
1556 - Modify the handling of the resolv.conf file to allow the DHCP
1557 process to start up even if the resolv.conf file has problems.
1560 - Add threshold logging functionality. Two new options,
1561 log-threshold-low and log-threshold-high, indicate to the
1562 server if and when it should log an error message as addresses
1566 - Add code to properly dereference a pointer in the dhclient code
1567 on an error condition.
1570 - Add code to help clean up soft leases.
1573 - Disable the gentle shutdown functionality until we can determine
1574 the best way to present it to remove or reduce the side effects.
1577 Changes since 4.3.0rc1
1580 Changes since 4.3.0b1
1582 - Tidy up receive packet processing.
1583 Thanks to Brad Plank of GTA for reporting the issue and suggesting
1587 Changes since 4.3.0a1
1589 - Modify the message displayed when a process hits a fatal error.
1590 The new message is much shorter and simply points to the README
1591 and our website for directions on bug submissions.
1594 Changes since 4.2.0 (new features)
1596 - If a client renews before 'dhcp-cache-threshold' percent of its lease
1597 has elapsed (default 25%), the server will reuse the allocated lease
1598 (provide a lease within the currently allocated lease-time) rather
1599 than extend or renew the lease. This absolves the server of needing
1600 to perform an fsync() operation on the lease database before reply,
1601 which improves performance. [ISC-Bugs #22228]
1602 Updated this patch to support asynchronous DDNS. If the server is
1603 attempting to do DDNS on a lease it should be updated and written to
1604 disk even if that wouldn't be necessary due to the thresholding.
1607 - The 'no available billing' log line now also logs the name of the last
1608 matching billing class tried before failing to provide a billing.
1611 - A problem with missing get_hw_addr function when --enable-use-sockets
1612 was used is now solved on GNU/Linux, BSD and GNU/Hurd systems. Note
1613 that use-sockets feature was not tested on those systems. Client and
1614 server code no longer use MAX_PATH constant that is not defined on
1615 GNU/Hurd systems. [ISC-Bugs #25979]
1617 - Add a perl script in the contrib directory, dhcp-lease-list.pl, which
1618 can parse v4 lease files and output the lease information in a more
1619 human friendly manner. This was written by Christian Hammers with
1620 some updates by vom and ISC. This is contributed code and is not
1621 supported by ISC; however it may be useful to some users.
1624 - Add support in v6 for on-commit, on-expire and on-release.
1627 - Add support for using classes with v6.
1630 - Update the DDNS code to current standards and allow for sharing
1631 of DDNS entries between v4 and v6 clients. The new code is used
1632 if the ddns-update-style is set to "standard", the older code is
1633 still available if ddns-update-style is set to "interim". The
1634 oldest DDNS code "ad-hoc" has been removed. Thanks to Thomas Pegeot
1635 who submitted a patch for this issue. This patch is based on
1636 that work with some modifications.
1639 - Add a configuration option to the server to suppress using fsync().
1640 Enabling this option will mean that fsync() is never called. This
1641 may provide better performance but there is also a risk that a lease
1642 will not be properly written to the disk after it has been issued
1643 to a client and before the server stops. Using this option is
1647 - Add some logging statements to indicate when the server is ready
1648 to serve. One statement is emitted after the server has finished
1649 reading its files and is about to enter the dispatch loop.
1650 This is "Server starting service.".
1651 The second is emitted when a server determines that both it and
1652 its failover peer are in the normal state.
1653 This is "failover peer <name>: Both servers normal."
1656 - Add support for accessing options from v6 relays. The v6relay
1657 statement allows the administrator to choose which relay to
1658 use when searching for an option, see the dhcp-options man page
1659 for a description. The host-identifier option has also been
1660 updated to support the use of relay options, see the dhcpd.conf
1661 man page for a description.
1664 - When doing DDNS if there isn't an appropriate zone statement attempt
1665 to find a reasonable nameserver via a DNS resolver. This restores
1666 some functionality that was lost in the transition to asynchronous
1667 DDNS. Due to the lack of security and increase in fragility of the
1668 system when using this feature we strongly recommend the use of
1669 appropriate zone statements rather than using this functionality.
1672 - Add support for specifying the address from which to send
1673 DDNS updates on the DHCP server. There are two new options
1674 "ddns-local-address4" and "ddns-local-address6" that each take
1675 one instance of their respective address types.
1678 - Add ignore-client-uids option in the server. This option causes
1679 the server to not record a client's uid in its lease. This
1680 violates the specification but may also be useful when a client
1681 can dual boot using different client ids but the same mac address.
1682 Thank you to Brian De Wolf at Cal Poly Pomona for the patch.
1686 - Extend the DHCPINFORM processing to honor the subnet selection option
1687 and take host declarations into account.
1688 Thanks to Christof Chen for testing and submitting the patch.
1691 - Extend the hardware expression to look into the lease structure
1692 for a hardware address if there is no packet. This allows the
1693 server to find the hardware address during on-expiry processing.
1696 - Add definitions for some options that have been specified by the IETF.
1700 Changes since 4.2.0 (bug fixes)
1702 - When using 'ignore client-updates;', the FQDN returned to the client
1703 is no longer truncated to one octet.
1705 - Cleaned up an unused hardware address variable in nak_lease().
1707 - Manpage entries for the ia-pd and ia-prefix options were updated to
1708 reflect support for prefix delegation.
1710 - Cleaned up some compiler warnings
1712 - An optimization described in the failover protocol draft is now included,
1713 which permits a DHCP server operating in communications-interrupted state
1714 to 'rewind' a lease to the state most recently transmitted to its peer,
1715 greatly increasing a server's endurance in communications-interrupted.
1716 This is supported using a new 'rewind state' record on the dhcpd.leases
1717 entry for each lease.
1719 - Fix the trace code which was broken by the changes to the DDNS code.
1721 - Update the fsync code to work with the changes to the DDNS code. It now
1722 uses a timer instead of noticing if there are no more packets to process.
1724 - When constructing the DNS name structure from a text string append
1725 the root to relative names. This satisfies a requirement in the DNS
1726 library that names be absolute instead of relative and prevents DHCP
1727 from crashing. [ISC-Bugs #21054]
1729 - "The LDAP Patch" that has been circulating for some time, written by
1730 Brian Masney and S.Kalyanasundraram and maintained for application to
1731 the DHCP-4 sources by David Cantrell has been included. Please be
1732 advised that these sources were contributed, and do not yet meet the
1733 high standards we place on production sources we include by default.
1734 As a result, the LDAP features are only included by using a compile-time
1735 option which defaults off, and if you enable it you do so under your
1736 own recognizance. We will be improving this software over time.
1739 - Prohibit including lease time information in a response to a DHCP INFORM.
1742 ! Accept a client id of length 0 while hashing. Previously the server would
1743 exit if it attempted to hash a zero length client id, providing attackers
1744 with a simple denial of service attack. [ISC-Bugs #21253]
1745 CERT: VU#541921 - CVE: CVE-2010-2156
1747 - A memory leak in ddns processing was closed. [ISC-Bugs #21377]
1749 - Modify the exception handling for initial context creation. Previously
1750 we would try and clean up before exiting. This could present problems
1751 when the cleanup required part of the context that wasn't available. It
1752 also didn't do much as we exited afterwards anyway. Now we simply log
1753 the error and exit. [ISC-Bugs #21093]
1755 - A bug was fixed that could cause the DHCPv6 server to advertise/assign a
1756 previously allocated (active) lease to a client that has changed subnets,
1757 despite being on different shared networks. Dynamic prefixes specifically
1758 allocated in shared networks also now are not offered if the client has
1759 moved. [ISC-Bugs #21152]
1761 - Add some debugging output for use with the DDNS code. [ISC-Bugs #20916]
1763 - Fix the trace code to handle timing events better and to truncate a file
1764 before using instead of overwriting it. [ISC-Bugs #20969]
1766 - Modify the determination of the default TTL to use for DDNS updates.
1767 The user may still configure the ttl via ddns-ttl. The default for
1768 both v4 and v6 is now 1/2 the (preferred) lease time with a limit. The
1769 previous defaults (1/2 lease time without a limit for v4 and a default
1770 value for v6) may be used by defining USE_OLD_DDNS_TTL in site.h
1773 - libisc/libdns is now brought up to version 9.7.1rc1. This corrects
1774 three reported flaws in ISC DHCP;
1776 o DHCP processes (dhcpd, dhclient) fail to start if one of either the
1777 IPv4 or IPv6 address families is not present. [ISC-Bugs #21122]
1779 o Assertion failure when attempting to cancel a previously running DDNS
1780 update. [ISC-Bugs #21133]
1782 o Compilation failure of libisc/libdns due to the use of a flexible
1783 array member. [ISC-Bugs #21316]
1785 - Add declaration for variable in debug code in alloc.c. [ISC-Bugs #21472]
1787 - Documentation cleanup covering multiple tickets
1788 [ISC-Bugs #20265] [ISC-Bugs #20259] minor cleanup
1789 [ISC-Bugs #20263] add text describing some default values
1790 [ISC-Bugs #20193] single quotes at the start of a line indicate a control
1791 line to nroff, escape them if we actually want a quote.
1792 [ISC-Bugs #18916] sync the pointer to web pages amongst the different docs
1794 - 'get-host-names true;' now also works even if 'use-host-decl-names true;'
1795 was also configured. The nature of this repair also fixes another
1796 error; the host-name supplied by a client is no longer overridden by a
1797 reverse lookup of the lease address. Thanks to a patch from Wilco Baan
1798 Hofman supplied to us by the Debian package maintenance team.
1799 [ISC-Bugs #21691] {Debian Bug#509445}
1801 - The .TH tag for the dhcp-options manpage was typo repaired
1802 thanks to a report from jidanni and the Debian package maintenance
1803 team. [ISC-Bugs #21676] {Debian Bug#563613}
1805 - More documentation changes - primarily to put the options in the dhclient
1806 and dhcpd man pages into the standard form. Thanks in part to a patch
1807 from David Cantrell at Red Hat.
1808 [ISC-Bugs #20264] and parts of [ISC-Bugs #17744] dhclient.8 changes
1810 - Add code to clear the pointer to an object in an OMAPI handle when the
1811 object is freed due to a dereference. [ISC-Bugs #21306]
1813 - Fixed a bug that leaks host record references onto lease structures,
1814 causing the server to apply configuration intended for one host to any
1815 other innocent clients that come along later. [ISC-Bugs #22018]
1818 [ISC-Bugs #19566] When trying to find the zone for a name for ddns allow
1819 the name to be at the apex of the zone.
1820 [ISC-Bugs #19617] Restrict length of interface name read from command line
1821 in dhcpd - based on a patch from David Cantrell at Red Hat.
1822 [ISC-Bugs #20039] Correct some error messages in dhcpd.c
1823 [ISC-Bugs #20070] Better range check on values when creating a DHCID.
1824 [ISC-Bugs #20198] Avoid writing past the end of the field when adding
1825 overly long file or server names to a packet and add a log message
1826 if the configuration supplied overly long names for these fields.
1827 Thanks to Martin Pala.
1828 [ISC-Bugs #21497] Add a little more randomness to rng seed in client
1829 thanks to a patch from Jeremiah Jinno.
1831 - Correct error handling in DLPI [ISC-Bugs #20378]
1833 - Remove __sun__ and __hpux__ typedefs in osdep.h as they are now being
1834 checked in configure. [ISC-Bugs #20443]
1836 - Modify how the cmsg header is allocated the v6 send and received routines
1837 to compile on more compilers. [ISC-Bugs #20524]
1839 - When parsing a domain name free the memory for the name after we are
1840 done with it. [ISC-Bugs #20824]
1842 - Add an elapsed time option to the release message and refactor the
1843 code to move most of the common code to a single routine.
1846 - Two identical log messages for commit_leases() have been disambiguated.
1849 - Parse date strings more properly - the code now handles semi-colons in
1850 date strings correctly. Thanks to a patch from Jiri Popelka at Red Hat.
1851 [ISC-Bugs #21501, #20598]
1853 - Fixes to lease input and output.
1854 [ISC-Bugs #20418] - Some systems don't support the "%s" argument to
1855 strftime, paste together the same string using mktime instead.
1856 [ISC-Bugs #19596] - When parsing iaid values accept printable
1858 [ISC-Bugs #21585] - Always print time values in omshell as hex
1859 instead of ascii if the values happen to be printable characters.
1861 - Minor changes for scripts, configure.ac and Makefiles
1862 [ISC-Bugs #19147] Use domain-search instead of domain-name in manual and
1863 example conf file. Thanks to a patch from David Cantrell
1865 [ISC-Bugs #19761] Restore address when doing a rebind in DHCPv6
1866 [ISC-Bugs #19945] Properly close the quote on some arguments.
1867 [ISC-Bugs #20952] Add 64 bit types to configure.ac
1868 [ISC-Bugs #21308] Add "PATH=" to CLIENT_PATH environment variable
1870 - Update the code to parse dhcpv6 lease files to accept a semi-colon at
1871 the end of the max-life and preferred-life clauses. In order to be
1872 backwards compatible with older lease files not finding a semi-colon
1873 is also accepted. [ISC-Bugs #22303].
1875 ! Handle a relay forward message with an unspecified address in the
1876 link address field. Previously such a message would cause the
1877 server to crash. Thanks to a report from John Gibbins. [ISC-Bugs #21992]
1878 CERT: VU#102047 CVE: CVE-2010-3611
1880 - ./configure on longer searches for -lcrypto to explicitly link against.
1881 This fixes a bug where 'dhclient' would have shared library dependencies
1882 on '/usr/lib'. [ISC-Bugs #21967]
1884 - Handle pipe failures more gracefully. Some OSes pass a SIGPIPE
1885 signal to a process and will kill the process if the signal isn't
1886 caught. This patch adds code to turn off the SIGPIPE signal via
1887 a setsockopt() call. The signal is already being ignored as part
1888 of the ISC library. [ISC-Bugs #22269]
1890 - Restore printing of values in omshell to the style pre 21585. For
1891 21585 we changed the print routines to always display time values
1892 as a hex list. This had a side effect of printing all data strings
1893 as a hex list. We shall investigate other ways of displaying time
1894 values more usefully. [ISC-Bugs #22626]
1896 ! Fix the handling of connection requests on the failover port.
1897 Previously a connection request from a source that wasn't
1898 listed as a failover peer would cause the server to become
1899 non-responsive. Thanks to a report from Brad Bendily, brad@bendily.com.
1901 CERT: VU#159528 CVE: CVE-2010-3616
1903 - Don't pass the ISC_R_INPROGRESS status to the omapi signal handlers.
1904 Passing it through to the handlers caused the omshell program to fail
1905 to connect to the server. [ISC-Bugs #21839]
1907 - Fix the parenthesis in the code to process configuration statements
1908 beginning with "auth". The previous arrangement caused
1909 "auto-partner-down" to be processed incorrectly. [ISC-Bugs #21854]
1911 - Limit the timeout period allowed in the dispatch code to 2^^32-1 seconds.
1912 Thanks to a report from Jiri Popelka at Red Hat.
1913 [ISC-Bugs #22033], [Red Hat Bug #628258]
1915 - When processing the format flags for a given option consume the
1916 flag indicating an optional value correctly. A symptom of this
1917 bug was an infinite loop when trying to parse the slp-service-scope
1918 option. Thanks to a patch from Marius Tomaschewski.
1921 - Disable the use of kqueue in the ISC library. This avoids a problem
1922 between the fork and socket code that caused the dhcpd process to
1923 use all available cpu if the program daemonized itself.
1926 ! When processing a request in the DHCPv6 server code that specifies
1927 an address that is tagged as abandoned (meaning we received a
1928 decline request for it previously) don't attempt to move it from
1929 the inactive to active pool as doing so can result in the server
1930 crashing on an assert failure. Also retag the lease as active
1931 and reset its timeout value.
1934 - Removed the restriction on using IPv6 addresses in IPv4 mode. This
1935 allows IPv4 options which contain IPv6 addresses to be specified. For
1936 example the 6rd option can be specified and used like this:
1939 option 6rd code 212 = { integer 8, integer 8,
1940 ip6-address, array of ip-address };
1941 option 6rd 16 10 2001:: 1.2.3.4, 5.6.7.8;
1943 - Handle some DDNS corner cases better. Maintain the DDNS transaction
1944 information when updating a lease and cancel any existing transactions
1945 when removing the ddns information.
1948 - Some fixes for LDAP
1949 [ISC-Bugs #21783] - Include lber library when building ldap
1950 [ISC-Bugs #22888] - Enable the ldap code when buidling common
1951 The above fixes are from Jiri Popelka at Red Hat.
1953 - Modify the dlpi code to accept getmsg() returning a positive value.
1956 ! In dhclient check the data for some string options for
1957 reasonableness before passing it along to the script that
1958 interfaces with the OS.
1962 - DHCPv6 server now responds properly if client asks for a prefix that
1963 is already assigned to a different client. [ISC-Bugs #23948]
1965 - Add the option "--no-pid" to the client, relay and server code,
1966 to disable writing a pid file. Add the option "-pf pidfile"
1967 to the relay to allow the user to supply the pidfile name at
1968 runtime. Add the "with-relay6-pid-file" option to configure
1969 to allow the user to supply the pidfile name for the relay
1970 in v6 mode at configure time.
1971 [ISC-Bugs #23351] [ISC-Bugs #17541]
1973 - 'dhclient' no longer waits a random interval after first starting up to
1974 begin in the INIT state. This conforms to RFC 2131, but elects not to
1975 implement a 'SHOULD' direction in section 4.1. The goal of this change
1976 is to start up faster. [ISC-Bugs #19660]
1978 - Added 'initial-delay' parameter that specifies maximum amount of time
1979 before client goes to the INIT state. The default value is 0. In previous
1980 versions of the code client could wait up to 5 seconds. The old behavior
1981 may be restored by using 'initial-delay 5;' in the client config file.
1984 - ICMP ping-check should now sit closer to precisely the number of seconds
1985 configured (or default 1), due to making use of the new microsecond
1986 scale timer internally to dhcpd. This corrects a bug where the server
1987 may immediately timeout an ICMP ping-check if it was made late in the
1988 current second. [ISC-Bugs #19660]
1990 - The DHCP client will schedule renewal and rebinding events in
1991 microseconds if the DHCP server provided a lease-time that would result
1992 in sub-1-second timers. This corrects a bug where a 2-second or lower
1993 lease-time would cause the DHCP client to enter an infinite loop by
1994 scheduling renewal at zero seconds. [ISC-Bugs #19660]
1996 - Client lease records are recorded at most once every 15 seconds. This
1997 keeps the client from filling the lease database disk quickly on very small
1998 lease times. [ISC-Bugs #19660]
2000 - To defend against RFC 2131 non-compliant DHCP servers which fail to
2001 advertise a lease-time (either mangled, or zero in value) the DHCP
2002 client now adds the server to the reject list ACL and returns to INIT
2003 state to hopefully find an RFC 2131 compliant server (or retry in INIT
2004 forever). [ISC-Bugs #19660]
2006 - Parameters configured to evaluate from user defined function calls can
2007 now be correctly written to dhcpd.leases (as on 'on events' or dynamic
2008 host records inserted via OMAPI). [ISC-Bugs #22266]
2010 - If a 'next-server' parameter is configured in a dynamic host record via
2011 OMAPI as a domain name, the syntax written to disk is now correctly parsed
2012 upon restart. [ISC-Bugs #22266]
2014 - The DHCP server now responds to DHCPLEASEQUERY messages from agents using
2015 IP addresses not covered by a subnet in configuration. Whether or not to
2016 respond to such an agent is still governed by the 'allow leasequery;'
2017 configuration parameter, in the case of an agent not covered by a configured
2018 subnet the root configuration area is examined. Server now also returns
2019 vendor-class-id option, if client sent it. [ISC-Bugs #21094]
2021 - Documentation fixes
2022 [ISC-Bugs #17959] add text to AIX section describing how to have it send
2023 responses to the all-ones address.
2024 [ISC-Bugs #19615] update the includes in dhcpctl/dhcpctl.3 to be more correct
2025 [ISC-Bugs #20676] update dhcpd.conf.5 to include the RFC numbers for DDNS
2027 - Relay no longer crashes, when DHCP packet is received over interface without
2028 any IPv4 address assigned. Also extended logging message about discarding
2029 packets with invalid hlen with information about relevant interface name.
2032 - Relay now properly logs that packet was received over interface without
2033 global IPv6 address [ISC-Bugs #24070]
2035 - Linux Packet Filter interface improvement. sockaddr_pkt structure is used,
2036 rather than sockaddr. Packet ethertype is now forced to ETH_P_IP.
2039 - Minor code cleanups - but note port change for #23196
2040 [ISC-Bugs #23470] - Modify when an ignore return macro is defined to
2041 handle unsed error return warnings for more versions of gcc.
2042 [ISC-Bugs #23196] - Modify the reply handling in the server code to
2043 send to a specified port rather than to the source port for the incoming
2044 message. Sending to the source port was test code that should have
2045 been removed. The previous functionality may be restored by defining
2046 REPLY_TO_SOURCE_PORT in the includes/site.h file. We suggest you don't
2047 enable this except for testing purposes.
2048 [ISC-Bugs #22695] - Close a file descriptor in an error path.
2049 [ISC-Bugs #19368] - Tidy up variable types in validate_port.
2051 - Code cleanup: remove obsolete PROTO, KandR, INLINE and ANSI_DECL macros
2054 - Compilation problem with gcc4.5 and omshell.c resolved. [ISC-Bugs #23831]
2056 - Client Script fixes
2057 [ISC-Bugs #23045] Typos in client/scripts/openbsd
2058 [ISC-Bugs #23565] In the client scripts add a zone id (interface id) if
2059 the domain search address is link local.
2060 [ISC-Bugs #1277] In some of the client scripts add code to handle the
2061 case of the default router information being changed without the address
2064 - Documentation cleanup
2065 [ISC-Bugs #23326] Updated References document, several man page updates
2067 - Server no longer complains about NULL pointer when configured
2068 server-identifier expression fails to evaluate. [ISC-Bugs #24547]
2070 - Convert ISC_R_INPROGRESS status to ISC_R_SUCCESS when called from other
2071 than the dispatch handler. This fixes an issue where omshell, when
2072 run from the same platform as the server, would appear to fail to
2073 connect. This is a companion to #21839. [ISC-Bugs #23592]
2075 - Enlarge the buffer size used by the Omshell code and some of the
2076 print routines to allow for greater than 60 characters or, when
2077 printing as hex strings, 20 characters. [ISC-Bugs #22743]
2079 - In Solaris 11 switch to using sockets instead of DLPI, thanks
2080 to a patch form Oracle. [ISC-Bugs #24634].
2082 - Strict checks for content of domain-name DHCPv4 option can now be
2083 configured during compilation time. Even though RFC2132 does not allow
2084 to store more than one domain in domain-name option, such behavior is
2085 now enabled by default, but this may change some time in the future.
2086 See ACCEPT_LIST_IN_DOMAIN_NAME define in includes/site.h.
2089 - DNS Update fix. A misconfigured server could crash during DNS update
2090 processing if the configuration included overlapping pools or
2091 multiple fixed-address entries for a single address. This issue
2092 affected both IPv4 and IPv6. The fix allows a server to detect such
2093 conditions, provides the user with extra information and recommended
2094 steps to fix the problem. If the user enables the appropriate option
2095 in site.h then server will be terminated
2098 ! Two packets were found that cause a server to halt. The code
2099 has been updated to properly process or reject the packets as
2100 appropriate. Thanks to David Zych at University of Illinois
2101 for reporting this issue. [ISC-Bugs #24960]
2102 One CVE number for each class of packet.
2106 - Fix the code that checks for an existing DDNS transaction to cancel
2107 when removing DDNS information, so that we will continue with the
2108 processing if we have a lease even if it doesn't have an outstanding
2109 transaction. [ISC-Bugs #24682]
2111 - Add AM_MAINTAINER_MODE to configure.ac to avoid rebuilding
2112 configuration files. [ISC-Bugs #24107]
2114 - Add support for passing DDNS information to a DNS server over
2115 an IPv6 address. [ISC-Bugs #22647]
2117 - Enhanced patch for 23595 to handle IPv4 fixed addresses more
2118 cleanly. [ISC-Bugs #23595]
2120 ! Add a check for a null pointer before calling the regexec function.
2121 Without this check we could, under some circumstances, pass
2122 a null pointer to the regexec function causing it to segfault.
2123 Thanks to a report from BlueCat Networks.
2127 ! Modify the DDNS handling code. In a previous patch we added logging
2128 code to the DDNS handling. This code included a bug that caused it
2129 to attempt to dereference a NULL pointer and eventually segfault.
2130 While reviewing the code as we addressed this problem, we determined
2131 that some of the updates to the lease structures would not work as
2132 planned since the structures being updated were in the process of
2133 being freed: these updates were removed. In addition we removed an
2134 incorrect call to the DDNS removal function that could cause a failure
2135 during the removal of DDNS information from the DNS server.
2136 Thanks to Jasper Jongmans for reporting this issue.
2140 - Fixed the code that checks if an address the server is planning
2141 to hand out is in a reserved range. This would appear as
2142 the server being out of addresses in pools with particular ranges.
2145 - In the DDNS code handle error conditions more gracefully and add more
2146 logging code. The major change is to handle unexpected cancel events
2147 from the DNS client code.
2150 - Tidy up the receive calls and eliminate the need for found_pkt.
2153 - Add support for Infiniband over sockets to the server and
2154 relay code. We've tested this on Solaris and hope to expand
2155 support for Infiniband in the future. This patch also corrects
2156 some issues we found in the socket code.
2159 - Add a compile time check for the presence of the noreturn attribute
2160 and use it for log_fatal if it's available. This will help code
2161 checking programs to eliminate false positives.
2164 - Fixed many compilation problems ("set, but not used" warnings) for
2165 gcc 4.6 that may affect Ubuntu 11.10 users. [ISC-Bugs #27588]
2167 - Modify the code that determines if an outstanding DDNS request
2168 should be cancelled. This patch results in cancelling the
2169 outstanding request less often. It fixes the problem caused
2170 by a client doing a release where the TXT and PTR records
2171 weren't removed from the DNS.
2174 - Use offsetof() instead of sizeof() to get the sizes for dhcpv6_relay_packet
2175 and dhcpv6_packet in several more places. Thanks to a report from
2176 Bruno Verstuyft and Vincent Demaertelaere of Excentis.
2179 - Remove outdated note in the description of the bootp keyword about the
2180 option not satisfying the requirement of failover peers for denying
2181 dynamic bootp clients.
2184 - Multiple items to clean up IPv6 address processing.
2185 When processing an IA that we've seen check to see if the
2186 addresses are usable (not in use by somebody else) before
2188 When reading in leases from the file discard expired addresses.
2189 When picking an address for a client include the IA ID in
2190 addition to the client ID to generally pick different addresses
2192 [ISC-Bugs #23138] [ISC-Bugs #27945] [ISC-Bugs #25586]
2195 - Remove unnecessary checks in the lease query code and clean up
2196 several compiler issues (some dereferences of NULL and treating
2197 an int as a boolean).
2200 - Fix the NA and PD allocation code to handle the case where a client
2201 provides a preference and the server doesn't have any addresses or
2202 prefixes available. Previously the server ignored the request with
2203 this patch it replies with a NoAddrsAvail or NoPrefixAvail response.
2204 By default the code performs according to the errata of August 2010
2205 for RFC 3315 section 17.2.2; to enable the previous style see the
2206 section on RFC3315_PRE_ERRATA_2010_08 in includes/site.h. This option
2207 may be removed in the future.
2208 Thanks to Jiri Popelka at Red Hat for the patch.
2211 - Fix up some issues found by static analysis.
2212 A potential memory leak and NULL dereference in omapi.
2213 The use of a boolean test instead of a bitwise test in dst.
2216 - Rotate the lease file when running in v6 mode.
2217 Thanks to Christoph Moench-Tegeder at Astaro for the
2218 report and the first version of the patch.
2221 - Correct code to calculate timing values in client to compare
2222 rebind value to infinity instead of renew value.
2223 Thanks to Chenda Huang from H3C Technologies Co., Limited
2224 for reporting this issue.
2227 - Fix some issues in the code for parsing and printing options.
2228 [ISC-Bugs #22625] - properly print options that have several fields
2229 followed by an array of something for example "fIa"
2230 [ISC-Bugs #27289] - properly parse options in declarations that have
2231 several fields followed by an array of something for example "fIa"
2232 [ISC-Bugs #27296] - properly determine if we parsed a 16 or 32 bit
2233 value in evaluate_numeric_expression (extract-int).
2234 [ISC-Bugs #27314] - properly parse a zero length option from
2235 a lease file. Thanks to Marius Tomaschewski from SUSE for the report
2236 and prototype patch for this ticket as well as ticket 27289.
2238 ! Previously the server code was relaxed to allow packets with zero
2239 length client ids to be processed. Under some situations use of
2240 zero length client ids can cause the server to go into an infinite
2241 loop. As such ids are not valid according to RFC 2132 section 9.14
2242 the server no longer accepts them. Client ids with a length of 1
2243 are also invalid but the server still accepts them in order to
2244 minimize disruption. The restriction will likely be tightened in
2245 the future to disallow ids with a length of 1.
2246 Thanks to Markus Hietava of Codenomicon CROSS project for the
2247 finding this issue and CERT-FI for vulnerability coordination.
2251 ! When attempting to convert a DUID from a client id option
2252 into a hardware address handle unexpected client ids properly.
2253 Thanks to Markus Hietava of Codenomicon CROSS project for the
2254 finding this issue and CERT-FI for vulnerability coordination.
2258 ! A pair of memory leaks were found and fixed. Thanks to
2259 Glen Eustace of Massey University, New Zealand for finding
2264 - Existing legacy unit-tests have been migrated to Automated Test
2265 Framework (ATF). Several new tests have been developed. To enable
2266 unit-tests, please use --with-atf in configure script. A Developer's
2267 Guide has been added. To generate it, please use make devel in
2268 the doc directory. It is currently in early stages of development,
2269 but is expected to grow in the near future. [ISC-Bugs 25901]
2271 ! An issue with the use of lease times was found and fixed. Making
2272 certain changes to the end time of an IPv6 lease could cause the
2273 server to abort. Thanks to Glen Eustace of Massey University,
2274 New Zealand for finding this issue.
2278 - Update the memory leakage debug code to work with v6.
2281 - Relax the requirements for deleting an A or AAAA record.
2282 Previously the DDNS removal code required both the A or AAAA
2283 record and the TXT record to exist. This requirement could
2284 cause problems if something interrupted the removal leaving
2285 the TXT record alone. This relaxation was codified in RFC 4703.
2288 - Modify the failover code to handle incorrect peer names
2289 better. Previously the structure holding the name might
2290 have been freed inappropriately in some cases and not
2291 freed in other cases.
2294 - Add a configure option, enable-secs-byteorder, to deal with
2295 clients that do the byte ordering on the secs field incorrectly.
2296 This field should be in network byte order but some clients
2297 get it wrong. When this option is enabled the server will examine
2298 the secs field and if it looks wrong (high byte non zero and low
2299 byte zero) swap the bytes. The default is disabled. This option
2300 is only useful when doing load balancing within failover.
2303 - Fix a set of issues that were discovered via a code inspection
2304 tool. Thanks to Jiri Popelka and Tomas Hozza Red Hat for the logs
2308 - Parsing unquoted base64 strings improved. Parser now properly handles
2309 strings that contain reserved names. [ISC-Bugs #23048]
2311 - Modify the nak_lease function to make some attempts to find a
2312 server-identifier option to use for the NAK.
2315 - The client now passes information about the options it requested
2316 from the server to the script code via environment variables.
2317 These variables are of the form requested_<option_name>=1 with
2318 the option name being the same as used in the new_* and old_*
2322 - Add support for a simple check that the server id in a request message
2323 to a failover peer matches the server id of the server. This support
2324 is enabled by editing the file includes/site.h and uncommenting the
2325 definition for SERVER_ID_CHECK. The option has several restrictions
2326 and issues - please read the comment in the site.h file before
2330 - Tidy up some compiler issues in the debug code.
2333 - Move the dhcpd.conf example file to dhcpd.conf.example to avoid
2334 overwriting the dhcpd.conf file when installing a new version of
2335 ISC DHCP. The user will now need to manual copy and edit the
2336 dhcpd.conf file as desired.
2339 - Check the status value when trying to read from a connection to
2340 see if it may have been closed. If it appears closed don't try
2341 to read from it again. This avoids a potential busy-wait like
2342 loop when the peer names are mismatched.
2345 - Remove an unused variable to keep compilers happy.
2348 - Modify test makefiles to be more similar to standard makefiles
2349 and comment out a currently unused test.
2352 - Address static analysis warnings.
2353 [ISC-Bugs #33510] [ISC-Bugs #33511]
2355 - Silence benign static analysis warnings.
2358 - Add check for 64-bit package for atf.
2361 - Use newer auto* tool packages and turn on RFC_3542 support on Mac OS.
2364 - Remove a variable when it isn't being used due to #ifdefs to avoid
2365 a compiler warning on Solaris using GCC.
2368 - Add a check for too much whitespace in a config or lease file.
2369 Thanks to Paolo Pellegrino for finding the issue and a suggestion
2373 - Fix several problems with using OMAPI to manipulate class and subclass
2377 - Added a sleep call after killing the old client to allow time
2378 for the sockets to be cleaned. This should allow the -r option
2379 to work more consistently.
2382 - Missing files for ISC DHCP Developer's Guide are now included in
2383 the release tarballs. To generate this documentation, please use
2384 make devel command in doc directory. [ISC-Bugs #32767]
2386 - Update client script for use with openwrt.
2389 - Fix the socket handling for DHCPv6 clients to allow multiple instances
2390 of a client on a single machine to work properly. Previously only
2391 one client would receive the packets. Thanks to Jiri Popelka at Red Hat
2392 for the bug report and a potential patch.
2395 - Added support for gentle shutdown after signal is received.
2396 [ISC-Bugs #32692] [ISC-Bugs 34945]
2398 - Enhance the DHCPv6 server logging to include the addresses that are assigned
2402 - Fix an operation in the DDNS code to be a bitwise instead of logical or.
2406 Changes since 4.1.0 (new features)
2408 - Failover port configuration can now be left to defaults (port 647) as
2409 described in the -12 revision of the Failover draft (and assigned by
2410 IANA). Thanks in part to a patch from David Cantrell at Red Hat.
2412 - If configured, dhclient may now transmit to an anycast MAC address,
2413 rather than using a broadcast address. Thanks to a patch from David
2414 Cantrell at Red Hat.
2416 - Added client support for setting interface MTU and metric, thanks to
2417 Roy "UberLord" Marples <roy@marples.name>.
2419 - Added client -D option to specify DUID type to send.
2421 - A new failover configuration parameter has been introduced for those
2422 environments where DHCP servers can be reasonably guaranteed to be
2423 "down" when the failover TCP socket is severed, "auto-partner-down".
2424 This parameter is not generally safe, and by default is disabled, so
2425 please carefully review the documentation of this parameter in the
2426 dhcpd.conf(5) manpage before determining to use it yourself.
2428 - Added a configuration function, 'gethostname()', which calls the system
2429 function of the same name and presents the results as a data expression.
2430 This function can be used to incorporate the system level hostname of
2431 the system the DHCP software is operating on in responses or queries (such
2432 as including a failover partner's hostname in a dhcp message or binding
2433 scope, or having a DHCP client send any system hostname in the host-name or
2434 FQDN options by default).
2436 - The dhcp-renewal-time and dhcp-rebinding-time options may now be configured
2437 for DHCPv4 operation and used independently of the dhcp-lease-time
2438 calculations. Invalid renew and rebinding times (e.g., greater than the
2439 determined lease time) are omitted.
2441 - Processing the DHCP to DNS server transactions in an asynchronous fashion,
2442 the DHCP server or client can now continue with its processing while
2443 awaiting replies from the DNS server.
2445 - The 'hardware [ethernet|etc] ...;' parameter in host records has been
2446 extended to attempt to match DHCPv6 clients by the last octets of a
2447 DUID-LL or DUID-LLT provided by the client.
2449 Changes since 4.1.0 (bug fixes)
2451 - Remove infinite loop in token_print_indent_concat().
2453 - Validate the argument to the -p option.
2455 - The notorious 'option <unknown> ... larger than buffer' log line,
2456 which is seen in some malformed DHCP client packets, was modified.
2457 It now logs the universe name, and does not log the length values
2458 (which are bogus corruption read from the packet anyway). It also
2459 carries a hopefully more useful explanation.
2461 - Suppress spurious warnings from configure about --datarootdir
2463 - A bug was fixed that caused the server not to answer some valid Solicit
2464 and Request packets, if the dynamic range covering any requested addresses
2465 had been deleted from configuration.
2467 - Update the code to deal with GCC 4.3. This included two sets of changes.
2468 The first is to the configuration files to include the use of
2469 AC_USE_SYSTEM_EXTENSIONS. The second is to deal with return values that
2472 - The db-time-format option was documented in manpages.
2474 - Using reserved leases no longer results in 'lease with binding state
2475 free not on its queue' error messages, thanks to a patch from Frode
2478 - Fix a build error in dhcrelay, using older versions of gcc with
2481 - Two uninitialized stack structures are now memset to zero, thanks to a
2482 patch from David Cantrell at Red Hat.
2484 - Fixed a cosmetic bug where pretty-printing valid domain-search options would
2485 result in an erroneous error log message ('garbage in format string').
2487 - A bug in DLPI packet transmission (Solaris, HP/UX) that caused the server
2488 to stop receiving packets is fixed. The same fix also means that the MAC
2489 address will no longer appear 'bogus' on DLPI-based systems.
2491 - A bug in select handling was discovered where the results of one select()
2492 call were discarded, causing the server to process the next select() call
2493 and use more system calls than required. This has been repaired - the
2494 sockets will be handled after the first return from select(), resulting in
2497 - The update-conflict-detection feature would leave an FQDN updated without
2498 a DHCID (still currently implemented as a TXT RR). This would cause later
2499 expiration or release events to fail to remove the domain name. The feature
2500 now also inserts the client's up to date DHCID record, so records may safely
2501 be removed at expiration or release time. Thanks to a patch submitted by
2504 - Memory leak in the load_balance_mine() function is fixed. This would
2505 leak ~20-30 octets per DHCPDISCOVER packet while failover was in use
2506 and in normal state.
2508 - Various compilation fixes have been included for the memory related
2509 DEBUG #defines in includes/site.h.
2511 - Fixed Linux client script 'unary operator expected' errors with DHCPv6.
2513 - Fixed setting hostname in Linux hosts that require hostname argument
2514 to be double-quoted. Also allow server-provided hostname to
2515 override hostnames 'localhost' and '(none)'.
2517 - Fixed failover reconnection retry code to continue to retry to reconnect
2518 rather than restarting the listener.
2520 - Compilation on Solaris with USE_SOCKETS defined in includes/site.h has
2521 been repaired. Other USE_ overrides should work better.
2523 - A check for the local flavor of IFNAMSIZ had a broken 'else' condition,
2524 that probably still resulted in the correct behaviour (but wouldn't use
2525 a larger defined value provided by the host OS).
2527 - Fixed a bug where an OMAPI socket disconnection message would not result
2528 in scheduling a failover reconnection, if the link had not negotiated a
2529 failover connect yet (e.g.: connection refused, asynch socket connect()
2532 - A bug was fixed that caused the 'conflict-done' state to fail to be parsed
2533 in failover state records.
2535 ! A stack overflow vulnerability was fixed in dhclient that could allow
2536 remote attackers to execute arbitrary commands as root on the system,
2537 or simply terminate the client, by providing an over-long subnet-mask
2538 option. CERT VU#410676 - CVE-2009-0692
2540 - Fixed a bug where relay agent options would never be returned when
2541 processing a DHCPINFORM.
2543 - Versions 3.0.x syntax with multiple name->code option definitions is now
2544 supported. Note that, similarly to 3.0.x, for by-code lookups only the
2545 last option definition is used.
2547 - Fixed a bug where a time difference of greater than 60 seconds between a
2548 failover pair could cause the primary to crash on contact with the
2549 secondary. Thanks to a patch from Steinar Haug.
2551 - Don't look for IPv6 interfaces on Linux when running in DHCPv4 mode.
2552 Thanks to patches from Matthew Newton and David Cantrell.
2554 - Secondary servers in a failover pair will now perform ddns removals if
2555 they had performed ddns updates on a lease that is expiring, or was
2556 released through the primary. As part of the same fix, stale binding scopes
2557 will now be removed if a change in identity of a lease's active client is
2558 detected, rather than simply if a lease is noticed to have expired (which it
2559 may have expired without a failover server noticing in some situations).
2561 - A patch supplied by David Cantrell at RedHat was applied that detects
2562 invalid calling parameters given to the ns_name_ntop() function.
2563 Specifically, it detects if the caller passed a pointer and size pair
2564 that causes the pointer to integer-wrap past zero.
2566 ! Fixed a fenceposting bug when a client had two host records configured,
2567 one using 'uid' and the other using 'hardware ethernet'. CVE-2009-1892
2569 - Fixed the check in the dhcp_interface_signal_handler routine to verify
2570 the existence of the linked signal handler before calling it.
2572 - Both host and subnet6 configuration groups are now included whether a
2573 fixed-address6 (DHCPv6) is in use or not. Host scoped configuration takes
2574 precedence. This fixes two bugs, one where host scoped configuration
2575 would not be included from a non-fixed-address6 host record, and the equal
2576 and opposite bug where subnet6 scoped configuration would not be used when
2577 over-riding values were not present in a matching fixed-address6 host
2580 - ./configure now checks to ensure the intX_t and u_intX_t types are defined,
2581 correcting a compilation failure when using Sun's compiler.
2583 - Modified the handling of a connection to avoid releasing the omapi io
2584 object for the connection while it is still in use. One symptom from
2585 this error was a segfault when a failover secondary attempted to connect
2586 to the failover primary if their clocks were not synchronized.
2588 - Clean up to allow compilation with gcc 2.95.4 on FreeBSD. Remove an
2589 extra semi-colon from common/dns.c and moved setting a variable to NULL
2590 in server/dhcpv6.c to allow the compiler to decide that the variable
2591 was always properly set.
2593 Changes since 4.1.0b1
2595 - A missing "else" in dhcrelay.c could have caused an interface not to
2598 Changes since 4.1.0a2
2600 - A cosmetic bug in DHCPDECLINE processing was fixed which caused all
2601 successful DHCPDECLINEs to be logged as "not found" rather than
2604 - Added configuration file examples for DHCPv6.
2606 - Some failover debugging #defines have been better defined and some
2607 high frequency messages moved to a deeper debugging symbol.
2609 - The CLTT parameter in failover is now only updated by client activity,
2610 and not by failover binding updates (taking on the peer's CLTT).
2612 - Failover BNDUPD messages are now discarded if they conflict with an
2613 update that has been transmitted, but not acknowledged.
2615 - A bug cleaning up unknown-xxx temporary option definitions was fixed.
2617 - Delayed-ack is now a compile-time option, compiled out by default.
2618 This feature is simply too experimental for right now, and causes
2619 some problems to some failover installations. We will revisit this
2622 - The !inet_pton() call in res_mkupdrec was adjusted to '<= 0' as
2623 inet_pton returns either 1, 0, or -1.
2625 - A dhclient-script for MacOS X has been included, which enables
2626 'dhclient -6' support.
2628 - DDNS removal routines were updated so that the DHCID is not removed until
2629 the client has been deprived of all A and AAAA records (not only the last
2630 one of either of those). This resolves a bug where dual stack clients
2631 would not be able to regain their names after either expiration event.
2633 Changes since 4.1.0a1
2635 - Corrected list of failover state values in dhcpd man page.
2637 - Fixed a bug that caused some request types to be logged incorrectly.
2639 - Clients that sent a parameter request list containing the
2640 routers option before the subnet mask option were receiving
2641 only the latter. Fixed.
2643 - The server wasn't always sending the FQDN option when it should.
2645 - A partner-down failover server no longer emits 'peer holds all free leases'
2646 if it is able to newly-allocate one of the peer's leases.
2648 - Fixed a coredump when adding a class via OMAPI.
2650 - Check whether files are zero length before trying to parse them.
2652 - Ari Edelkind's PARANOIA patch has been included and may be compiled in
2653 via two ./configure parameters, --enable-paranoia and
2654 --enable-early-chroot.
2656 - ./configure was extended to cover many optional build features, such
2657 as failover, server tracing, debugging, and the execute() command.
2659 - There is now a default 1/4 of a second scheduled delay between delayed
2660 fsync()'s, it can be configured by the max-ack-delay configuration
2663 - A bug was fixed where the length of a hostname was miscalculated, so that
2664 hosts were given odd-looking domain names ("foo.bar.ba.example.com").
2666 - Shared network selection should be done from the innermost relay
2667 valid link-address field, rather than the outermost.
2669 - Prefix pools are attached to shared network scopes.
2671 - Merged IA_XX related structures.
2673 - Add DHCPv6 files in configure.
2675 - A memory leak when using omapi has been fixed.
2677 - DHCPv6 vendor-class options (VSIO) are now only sent when they appear
2678 on the DHCPv6 ORO. This resolves a bug where VSIO options were placed
2679 in IA_NA encapsulated options fields.
2681 - Integrated client with stateless, temporary address and prefix delegation
2684 - A double-dereference in dhclient transmission of DHCPDECLINEs was
2687 - Fix handling of format code 'Z'.
2689 - Support "-1" argument in DHCPv6.
2691 - Merge DHCPv6-only "dhcrelay6" into general-purpose "dhcrelay" (use
2692 "-6" option to select DHCPv6 mode).
2694 - Fix handling of -A and -a flags in dhcrelay; it was failing to expand
2695 packet size as needed to add relay agent options.
2697 - A bug in subnet6 parsing where options contained in subnet6 clauses would
2698 not be applied to clients addressed within that network was repaired.
2700 - When configuring a "subnet {}" or "subnet6 {}" without an explicit
2701 shared-network enclosing it, the DHCP software would synthesize a
2702 shared-network to contain the subnet. However, all configuration
2703 parameters within the subnet more intuitively belong "to any client
2704 on that interface", or rather the synthesized shared-network. So,
2705 when a shared-network is synthesized, it is used to contain the
2706 configuration present inside the subnet {} clause. This means that
2707 the configuration will be valid for all clients on that network, not
2708 just those addressed out of the stated subnet. If you intended the
2709 opposite, the workaround is to explicitly configure an empty
2712 - A bug was fixed where Information-Request processing was not sourcing
2713 configured option values.
2715 - A warning was added since the DHCPv6 processing software does not yet
2716 support class statements.
2718 - Compilation warnings on GCC 4.3 relating to bootp source address
2719 selection were repaired.
2721 - The v6 BSD socket method was updated to use a single UDP BSD socket
2722 no matter how many interfaces are involved, differentiating the
2723 interfaces the packets were received on by the interface index supplied
2726 - The relay agent no longer listens to the All DHCP Servers Multicast
2729 - A bug was fixed in data_string_sprintfa() where va_start was only called
2730 once for two invocations of vsprintf() variants.
2732 - ERO (RFC 4994) server support.
2734 - Basic and partial DHCPv6 leasequery support.
2736 - Reliable DHCPv6 release (previous behavior, send release and exit, is
2737 still available with dhclient -6 -1 -r).
2739 Changes since 4.0.0 (new features)
2741 - Added DHCPv6 rapid commit support.
2743 - Added explicit parser support for zero-length DHCP options, such as
2744 rapid-commit, via format code 'Z'.
2746 - It's now possible to update the "ends" field of a lease with OMAPI.
2747 This is useful if you want not only to release a lease, but also make
2748 it available for reuse right away. Hat tip to Christof Chen.
2750 - Fixed definition of the iaaddr hash functions to use the correct
2751 functions when referencing and dereferencing memory.
2753 - Some definitions not in phase with the IANA registry were updated.
2755 - Allocated interface IDs are better controlled ('u' bit set to zero,
2756 reserved IDs avoided).
2758 - Unicast options are taken into account only for RENEWs.
2760 - NoAddrsAvail answers to SOLICITs are always ADVERTISEs even when a SOLICIT
2761 carries a rapid-commit option.
2763 - Return in place of raise an impossible condition when one tries to release
2764 an empty active lease.
2766 - Timer granularity is now 1/100s in the DHCPv6 client.
2768 - The dhclient-script was updated to create a host route for the default
2769 gateway if the supplied subnet mask for an IPv4 address was a /32. This
2770 allows the client to work in 'captive' network environments, where the
2771 operator does not want clients to crosstalk directly.
2773 - MINUS tokens should be parsable again.
2775 - Multiple (up to "delayed-ack x;" maximum) DHCPv4 packets are now queued and
2776 released in bursts after single fsync() events when the upper limit is
2777 reached or if the receiving sockets go dry. The practical upshot is
2778 that fsync-coupled server performance is now multiplicitively increased.
2779 The default delayed ack limit is 28. Thanks entirely to a patch from
2782 Changes since 4.0.0 (bug fixes)
2784 - DHCP now builds on AIX.
2786 - Exit with warning when DHCPv6-specific statements are used in the
2787 config file but -6 is not specified.
2789 - Fixed "--version" flag in dhcrelay
2791 - The 'min-secs' configuration parameter's log message has been updated to
2794 - The warning logged when an address range doesn't fit in the subnets
2795 they were declared has been updated to be more helpful and identify the
2796 typo in configuration that created the spanning addresses.
2798 - A bug in failover pool rebalancing that caused POOLREQ message ping-pongs
2801 - A flaw in failover pool rebalancing that could cause POOLREQ messages to
2802 be sent outside of the min-balance/max-balance scheduled intervals has
2805 - A cosmetic bug during potential-conflict recovery that caused the peer's
2806 'conflict-done' state message to be logged as 'unknown-state' has been
2807 repaired. It is now logged correctly.
2809 - A bug was fixed where the 'giaddr' may be used to find the client's subnet
2810 rather than its own 'ciaddr'.
2812 - A log message was introduced to clarify the situation where a failover
2813 'address' parameter (the server's local address) did not resolve to an
2816 - The minimum site code value was set to 224 in 3.1.0 to track RFC3942. This
2817 broke a lot of legacy site local configurations. The new code in place will
2818 track site local space minimum option codes and logs a warning to encourage
2819 updates and exploration of site local code migration problems. Option
2820 codes less than 128 in site local spaces remain inaccessible.
2822 - A possible relay agent option bug was repaired where random server
2823 initialization state may have been used to signal the relay agent
2824 information options sub-option code for the 'END' of the option space.
2826 - Fixes to allow code to compile and run on Solaris 9.
2828 - Fixes to allow code to compile on Mac OS X Leopard (10.5).
2830 - When server is configured with options that it overrides, a warning is
2831 issued when the configuration file is read, rather than at the time the
2832 option is overridden. This was important, because the warning was given
2833 every time the option was overridden, which could create a lot of
2834 unnecessary logging.
2836 - Fixed a compilation problems on platforms that define a value for FDDI,
2837 which conflicts with a dhcp configuration syntax token by the same name.
2839 - When a failover server suspects it has encountered a peer running a
2840 version 3.0.x failover server, a warning that the failover wire protocol
2841 is incompatible is printed.
2843 - The failover server no longer issues a floating point error if it encounters
2844 a previously undefined option code.
2846 - Fix startup error messages to report a missing "subnet6 declaration", rather
2847 than a missing "subnet declaration", when running as a DHCPv6 server.
2849 - DHCPv6 client timestamp in DUID was based on the year 1970 rather
2852 - Warn when attempting to use a hardware parameter in DHCPv6.
2854 - DHCPv6 released resources are now marked as released by the client.
2856 - 'Soft' bindings have no more side-effects.
2858 Changes since 4.0.0b3
2860 - The reverse dns name for PTR updates on IPv6 addresses has been fixed to
2861 use ip6.arpa. rather than default to in-addr.arpa and require user
2864 - dhc6_lease_destroy() and dhc6_ia_destroy() now set lease and IA pointers
2865 to NULL after freeing, to prevent subsequent accesses to freed memory.
2867 - The DHCPv6 server would not send the preference option unless the
2868 client requested it, via the ORO. This has been fixed, so the DHCPv6
2869 server will always send the preference value if it is configured.
2871 - When addresses were passed as hints to the server in an IA, they were
2872 incorrectly handled, sometimes being treated as an error. Now the
2873 server will treat these as hints and ignore them if it cannot supply
2874 a requested address.
2876 - If the client had multiple addresses, and one expired (was not renewed
2877 by the server), the client would continue to attempt to renew the same
2878 old address over and over. Now, the client will omit any expired
2879 addresses from future Confirm, Renew, or Rebind messages.
2881 - dhclient -6 will now select renew/rebind timers based upon the longest
2882 address expiration time rather than the shortest expiration time, in
2883 order to avoid cascading renewals in the event a server elects not to
2884 extend one of multiple IAADDR leases.
2886 - The server now limits clients that request multiple addresses to one
2887 address per IA by default, which can be adjusted through the
2888 "limit-addrs-per-ia" configuration option.
2890 - The DHCPv6 client now issues fresh transaction IDs on Renew and Rebind
2891 message exchanges, rather than using the most recent ID.
2893 - The DHCPv6 server now replies to Information-Request messages.
2895 - A bug was fixed in the dhclient-script for BSDs to correctly carry error
2896 codes through some conditions.
2898 - The parsing of some options in the dhclient lease file, in particular
2899 the success DHCPv6 status-code, was fixed.
2901 - A bug was fixed that caused the DHCPv6 ORO option to be corrupted with
2902 seemingly random values.
2904 - A reference overleak in DHCPv6 shared network processing was repaired.
2906 - ./configure now autodetects local database locations rather than trying
2907 to put dhcpd.leases and dhclient.leases in /usr/local/var/db, which no
2910 - Regression fix for bug where server advertised a IPv6 address in
2911 response to a SOLICIT but would not return the address in response
2914 - A bug was fixed where the DHCPv6 server puts the NoAddrsAvail status
2915 code in the IA_NA was fixed. The status code now appears in the root
2918 Changes since 4.0.0b2
2920 - Clarified error message when lease limit exceeded
2922 - Relative time may now be used as a qualifier for 'allow' and 'deny' access
2923 control lists. These directives may be used to assist in re-addressing
2924 address pools without having to constantly reconfigure the server. Please
2925 see 'man dhcpd.conf' for more information on allow/deny 'after time' syntax.
2926 Thanks to a patch from Christof Chen.
2928 - The server will now include multiple IA_NA's and multiple IAADDRs within
2929 them, if advertised by the client. It still only seeks to allocate one
2932 Changes since 4.0.0b1
2934 - Use different paths for PID and lease files when running in DHCPv4
2935 or DHCPv6 mode, so that servers for both protocols can be run
2936 simultaneously on a single interface.
2938 - Fixed a buffer overflow error which could have allowed a denial
2939 of service under unusual server configurations
2941 - Eliminated a spurious error message from the client
2943 - A number of bugs with the internal handling of lease state on the
2944 server have been fixed. Some of these could cause server crashes.
2946 - The peer_wants_leases() changes pulled up from 3.1.0 were corrected,
2947 'never used' leases will no longer consistently shift between servers
2948 on every pool rebalance run.
2950 - sendmsg()/recvmsg() control buffers are now declared in such a way to
2951 ensure they are correctly aligned on all (esp. 64-bit) architectures.
2953 - The client leasing subsystem was streamlined and corrected to account
2954 more closely for changes in client link attachment selection.
2956 Changes since 4.0.0a3
2958 - The DHCP server no longer requires a "ddns-update-style" statement,
2959 and now defaults to "none", which means DNS updates are disabled.
2961 - Log messages when failover peer names mismatch have been improved to
2962 point out the problem.
2964 - Bug where server advertised a IPv6 address in response to a SOLICIT
2965 but would not return the address in response to a REQUEST. Thanks to
2966 Dennis Kou for finding the bug.
2968 - Fixed an error causing the server to lock up on lease expiration,
2969 reported independently by Jothilingam Vasu and Dennis Kou.
2971 - Fixed a ./configure bug where compile tests were failing due to
2972 "-Werror" (unused variable) rather than the actual test failure. Lead
2973 to inconsistent and unworkable auto-configurations.
2975 - Compilation with DLPI and -Werror has been repaired.
2977 - Error in decoding IA_NA option if multiple interfaces are present
2978 fixed by Marcus Goller.
2980 - DHCPv6 server Confirm message processing has been enhanced - it no
2981 longer replies only to clients with host {} records, it now replies
2982 as directed in RFC3315 section 18.2.2 - that is, to all clients
2983 regardless of the existence of bindings.
2985 - A core dump during expired lease cleanup has been repaired.
2987 - DDNS updates state information are now stored in 'binding scopes' that
2988 follow the leases through their lifecycles. This enables DDNS teardowns
2989 on leases that are assigned and expired inbetween a server restart (the
2990 state is recovered from dhcpd.leases). Arbitrary user-specified binding
2991 scopes ('set var = "value";') are not yet supported.
2993 - Additional compilation problems on HP/UX have been repaired.
2995 Changes since 4.0.0a2
2997 - Fix for startup where there are no IPv4 addresses on an interface.
2998 Thanks to Marcus Goller for reporting the bug.
3000 - Fixed file descriptor leak on listen failure. Thanks to Tom Clark.
3002 - Bug in server configuration parser caused server to get stuck on
3003 startup for certain bad pool declarations. Thanks to Guillaume
3004 Knispel for the bug report and fix.
3006 - Code cleaned to remove warnings reported by "gcc -Wall".
3008 - DHCPv6 is now the default. You can disable DHCPv6 support using the
3009 "--disable-dhcpv6" flag when you run the configure script.
3011 - An internal database inconsistency bug was repaired where the server
3012 would segfault if a client attempted to renew a lease that had been
3013 loaded from persistent storage.
3015 - 'request' and 'also request' syntaxes have been added to accommodate
3016 the DHCPv6 client configuration. 'send dhcp6.oro' is no longer
3019 - Bug fixed where configuration file parsing did not work with
3020 zero-length options; this made it impossible to set the
3021 rapid-commit option.
3023 - Bogus messages about host records with IPv4 fixed-addresses being of
3024 non-128-bits in length were removed.
3026 Changes since 4.0.0a1
3028 - Bug in octal parsing fixed. Thanks to Bernd Fuhrmann for the report
3031 - Autoconf now supplies proper flags for Solaris DHCPv6 builds.
3033 - Fix for parsing error on some IPv6 addresses.
3035 - Invalid CIDR representation for IPv6 subnets or ranges now checked
3036 for when loading configuration.
3038 - Compilation on HP/UX has been repaired. The changes should generally
3039 apply to any architecture that supplies SIOCGLIFCONF but does not
3040 use 'struct lifconf' structures to pass values.
3042 - Two new operators, ~= and ~~, have been integrated to implement
3043 boolean matches by regular expression (such as may be used in
3044 class matching statements). Thanks to a patch by Alexandr S.
3045 Agranovsky, which underwent slight modification.
3047 - Fix for icmp packets on 64-bit systems (bug introduced in 4.0).
3049 - A bug was fixed in interface discovery wherein an error identifying
3050 a server-configured interface with no IPv4 addresses would SEGV.
3052 - Fixed a bug in which write_lease() might report a failure incorrectly
3054 - Added support for DHCPv6 Release messages
3056 - Added -x option to dhclient, which triggers dhclient processes
3057 to exit gracefully without releasing leases first
3059 - All binaries (client, server, relay) now change directories
3060 to / before going into daemon mode, so as not to hold $CWD open
3062 - Fixed a bug parsing DHCPv6 client-id's in host-identifier statements
3064 - Fixed a bug with the 'ddns-updates' boolean server configuration
3065 parameter, which caused the server to fail.
3067 Changes since 4.0.0-20070413
3069 - Old (expired) leases are now cleaned.
3071 - IPv6 subnets now have support for arbitrary allocation ranges via
3072 a new 'range6' configuration directive.
3074 - An obviated option code hash lookup to find D6O_CLIENTID was removed.
3076 - Corrected some situations where variables might be used without being
3079 - Silenced several other compiler warnings.
3081 - Include the more standard sys/uio.h rather than rely upon other
3082 header files to include it (fixes a BSD 4.2 compile failure).
3084 - Duplicate dhclient-script updates for DHCPv6 to all provided scripts.
3086 - DHCPv4 I/O methods that failed to sense hardware address were corrected.
3088 - DHCPv4 is now the default (as documented) rather than DHCPv6. The default
3089 was set to DHCPv6 to facilitate ease early development, and forgotten.
3091 - Corrected a segmentation violation in DHCPv4 socket processing.
3093 - dhclient will now fork() into the background once it binds to an
3094 IPv6 address, or immediately if the -n flag is supplied.
3096 - -q is now the default behaviour on dhclient, with -d or -v enabling
3097 non-quiet (stderr logging) mode.
3099 - Fix documentation of the domain-search atom (quoted, with commas).
3101 - Document DHCPv6 options presently in the default table.
3103 - Replaced ./configure shellscripting with GNU Autoconf.
3105 Changes since 3.1.0 (NEW FEATURES)
3107 - DHCPv6 Client and Server protocol support. Use '-6' to run the daemons
3108 as v6-only. Use '-4' to run the daemons as v4-only (default. There is
3109 no support currently for both.
3111 - Server support for multiple IA_NA options, containing at most one
3114 - Client support for one IA_NA option, containing any number of IAADDR
3117 - Server support for the DHCPv6 Information-request message.
3119 - Inappropriate unicast DHCPv6 messages sent to the server are now
3120 discarded, and this has rearchitected the IO system slightly.
3122 - The DHCPv6 server DUID defaults to type 1, is persistently stored in
3123 the leases database, and can be over-ridden (either completely, or by
3124 specifying type 1 or type 2).
3126 - The server only uses Rapid-Commit if it has been configured with the
3127 Rapid-Commit option and the client requests it.
3129 - DDNS support. We now update AAAA records in the same place we would
3130 update A records, if we have an IPv6 address. We also generate IP6.ARPA
3131 style names for PTR records if we're dealing with an IPv6 address. Both
3132 A and AAAA updates are done using the same 'fqdn.' virtual option space
3133 (although the DHCPv4 FQDN and DHCPv6 FQDN options are formatted
3134 differently, they both use the same code here).
3136 - The Linux dhclient-script attempts to set and remove assigned addresses,
3137 and to configure /etc/resolv.conf from nameserver and domain name
3138 configurations. It can be extended to configure other parameters.
3140 - Initial DHCPv6 lease support.
3142 - The IO system now tracks all local IP addresses, so that the DHCP
3143 applications (particularly the dhcrelay) can discern between what frames
3144 were transmitted to it, and what frames are being carried through it which
3145 it should not intercept.
3147 Changes since 3.1.0 (Maintenance)
3149 - A bug was repaired where MAC Address Affinity for virgin leases always
3150 mapped to the primary. Virgin leases now have an interleaved preference
3151 between primary and secondary.
3153 - A bug was repaired where MAC Address Affinity for clients with no client
3154 identifier was sometimes mishashed to the peer. Load balancing during
3155 runtime and pool rebalancing were opposing.
3157 - An assertion in lease counting relating to reserved leases was repaired.
3159 - The subnet-mask option inclusion now conforms with RFC2132 section 3.3;
3160 it will only appear prior to the routers option if it is present on the
3161 Parameter-Request-List. The subnet-mask option will also only be
3162 included by default (if it is not on the PRL) in response to DISCOVER
3163 or REQUEST messages.
3165 - The FQDN option is only supplied if the client supplied an FQDN option or
3166 if the FQDN option was explicitly requested on the PRL.
3168 - Dynamic BOOTP leases are now load balanced in failover.
3170 Changes since 3.1.0rc1
3172 - The parse warning that 'deny dynamic bootp;' must be configured for
3173 failover protected subnets was removed.
3175 Changes since 3.1.0b2
3177 - Failover rebalance events no longer play ping pong with round errors
3178 (moving leases between free and back to backup where there are an
3179 odd number of leases).
3181 - The 'pool' log line has been split into two messages, one before the
3182 rebalance run, and one after.
3184 - Any queued BNDACKs are transmitted before transmitting new BNDUPDs.
3185 This enforces the correct sequence of events for the remote server
3186 processing these messages.
3188 Changes since 3.1.0b1
3190 - Fixed a bug that caused OMAPI clients to freeze when opening lease
3193 - A new server config option "fqdn-reply" specifies whether the server
3194 should send out option 81 (FQDN). Defaults to "on". If set to "off",
3195 the FQDN option is not sent, even if the client requested it. This is
3196 needed because some clients misbehave otherwise. Thanks to Christof Chen
3199 - Allow trace output files (-tf option) to be overwritten, rather than
3200 crashing dhcpd if the file already exists
3202 - A bug was fixed that caused dhcpd to segfault if a pool was declared
3203 outside the scope of a subnet in dhcpd.conf.
3205 - Some uninitialized values were repaired in dhcpleasequery.c that
3206 caused the server to abort.
3208 - A new server config option, 'do-reverse-updates', has been added
3209 which causes the server to abstain from performing updates on PTR
3210 records. Thanks to a patch from Christof Chen at Allianz.
3212 - A bug was repaired in subencapsulation support, where spaces separated
3213 by empty spaces would not get included.
3215 - A bug in dhclient was repaired which caused it to send parameter request
3216 lists of 55 bytes in length no matter how long the declared PRL was.
3218 - 'dhcp.c(3953): non-null pointer' has been repaired. This fixes a flaw
3219 wherein the DHCPv4 server may ignore a configured server-identifier.
3221 - A flaw in failover startup sequences was repaired that sometimes left
3222 the primary DHCP server's pool rebalance schedules unscheduled.
3224 - Corrected a flaw that broke encapsulated spaces included due to presence
3225 on the parameter request list.
3227 Changes since 3.1.0a3
3229 - Some spelling fixes.
3231 Changes since 3.1.0a2
3233 - A bug was fixed where attempting to permit leasequeries results in a
3234 fatal internal error, "Unable to find server option 49".
3236 - A bug was fixed in dhclient rendering the textual output form of the
3237 domain-search option syntax.
3239 Changes since 3.1.0a1
3241 - A bug in the FQDN universe that added FQDN codes to the NWIP universe's
3242 hash table was repaired.
3244 - The servers now try harder to transmit pending binding updates when
3245 entering normal state.
3247 - UPDREQ/UPDREQALL handling was optimized - it no longer dequeues and
3248 requeues all pending updates. This should reduce the number of spurious
3249 'xid mismatch' log messages.
3251 - An option definition referencing leak was fixed, which resulted in early
3252 termination of dhclient upon the renewal event.
3254 - Some default hash table sizes were tweaked, some upwards, some downwards.
3255 3.1.0a1's tables resulted in a reduction in default server memory use.
3256 The new selected values provide more of a zero sum (increasing the size
3257 of tables likely to be populated, decreasing the size of tables unlikely).
3259 - Lease structures appear in three separate hashes: by IP address, by UID,
3260 and by hardware address. One type of table was used for all three, and
3261 improvements to IP address hashing were applied to all three (so UID and
3262 hardware addresses were treated like 4-byte integers). There are now two
3263 types of tables, and the uid/hw hashes use functions more appropriate
3266 - The max-lease-misbalance percentage no longer causes scheduled rebalance
3267 runs to be skipped: it still governs the schedule, but every scheduled
3268 run will attempt balance.
3270 - A segfault bug in recursive encapsulation support has been corrected.
3272 Changes since 3.0 (New Features)
3274 - A workaround for certain STSN servers that send a mangled domain-name
3275 option was introduced for dhclient. The client will now accept corrupted
3276 server responses, if they contain a valid DHCP_MESSAGE_TYPE (OFFER, ACK,
3277 or NAK). The server will continue to not accept corrupt client packets.
3279 - Support for 'reserved' (pseudo-static) and BOOTP leases via failover
3282 - Support for adding, removing, and managing class and subclass statements
3285 - The failover implementation was updated to comply with revision 12 of
3288 - 'make install' now creates the initial zero-length dhcpd.leases file if
3289 one does not already exist on the system.
3291 - RFC3942 compliance, site-local option spaces start at 224 now, not 128.
3293 - The Load Balance Algorithm was misimplemented. The current implementation
3296 - lcase() and ucase() configuration expressions have been added which adjust
3297 their arguments from upper to lower and lower to upper cases respectively.
3298 Thanks to a patch from Albert Herranz.
3300 - The dhclient 'reject ...;' statement, which rejects leases given by named
3301 server-identifiers, now permits address ranges to be specified in CIDR
3302 notation. Thanks to a patch from David Boyce.
3304 - The subnet-mask option is now supplied by default, but at lowest
3305 priority. This helps a small minority of clients that provide parameter
3306 request lists, but do not list the subnet-mask option because they were
3307 designed to interoperate with a server that behaves in this manner.
3309 - The FQDN option is similarly supplied even if it does not appear on the
3310 parameter request list, but not to the exclusion of options that do
3311 appear at the parameter request list. Up until now it had ultimate
3312 priority over the client's parameter request list.
3314 - Varying option space code and length bit widths (8/16/32) are now
3315 supported. This is a milestone in achieving RFC 3925 "VIVSO" and
3318 - A new common (server or client) option, 'db-time-format local;', has
3319 been added which prints the local time in /var/db/dhcpd.leases rather
3320 than UTC. Thanks to a patch from Ken Lalonde.
3322 - Some patches to improve DHCP Server startup speed from Andrew Matheson
3323 have been incorporated.
3325 - Failover pairs now implement 'MAC Affinity' on leases moving from the
3326 active to free states. Leases that belonged to the failover secondary
3327 are moved to BACKUP state rather than FREE upon exiting EXPIRED state.
3328 If lease rebalancing must move leases, it tries first to move leases
3329 that belong to the peer in need.
3331 - The server no longer sends POOLREQ messages unless the pool is severely
3332 misbalanced in the peer's favor (see 'man dhcpd.conf' for more details).
3334 - Pool rebalance events no longer happen upon successfully allocating a
3335 lease. Instead, they happen on a schedule. See 'man dhcpd.conf' for the
3336 min-balance and max-balance statements for more information.
3338 - The DHCP Relay Agent Information Option / Link Selection Sub-Option
3339 is now supported. (See RFC3527 for details).
3341 - A new DDNS related server option, update-conflict-detection, has been
3342 added. If this option is enabled, dhcpd will perform normal DHCID
3343 conflict resolution (the default). If this option is disabled, it will
3344 instead trust the assigned name implicitly (removing any other bindings
3345 on that name). This option has not been made available in dhclient.
3347 - In those cases where the DHCP software manufactures an IP header (to
3348 transmit via bpf, lpf, etc), the IP TTL the software selects has been
3349 increased from 16 to 128. This is intended to match Microsoft Windows
3350 DHCP Client behaviour, to increase compatibility.
3352 - 'ignore client-updates;' now has behaviour that is different from
3353 'deny client-updates;'. The client's request is not truly ignored,
3354 rather it is encouraged. Should this value be configured, the server
3355 updates DNS as though client-updates were set to 'deny'. That is, it
3356 enters into DNS whatever it is configured to do already, provided it is
3357 configured to. Then it sends a response to the client that lets the
3358 client believe it is performing client updates (which it will), probably
3359 for a different name. In essence, this lets the client do as it will,
3360 ignoring this aspect of their request.
3362 - Support for compressed 'domain name list' style DHCP option contents, and
3363 in particular the domain search option (#119) was added.
3365 - The DHCP LEASEQUERY protocol as defined in RFC4388 is now implemented.
3366 LEASEQUERY lets you query the DHCP server for information about a lease,
3367 using either an IP address, MAC address, or client identifier. Thanks
3368 to a patch from Justin Haddad.
3370 - DHCPD is now RFC2131 section 4.1 compliant (broadcast to all-ones ip and
3371 ethernet mac address) on the SCO platform specifically without any strange
3372 ifconfig hacks. Many thanks go to the Kroger Co. for donating the
3373 hardware and funding the development.
3375 - A new common configuration executable statement, execute(), has been
3376 added. This permits dhcpd or dhclient to execute a named external
3377 program with command line arguments specified from other configuration
3378 language. Thanks to a patch written by Mattias Ronnblom, gotten to us
3381 - A new dhcp server option 'adaptive-lease-time-threshold' has been added
3382 which causes the server to substantially reduce lease-times if there are
3383 few (configured percentage) remaining leases. Thanks to a patch submitted
3386 - Encapsulated option spaces within encapsulated option spaces is now
3389 Changes since 3.0.6rc1
3391 - supersede_lease() now requeues leases in their respective hardware
3392 address hash bucket. This mirrors client identifier behaviour.
3396 - Assorted fixes for broken network devices: Packet length is now
3397 determined from the IP header length field to finally calculate the
3398 UDP payload length, because some NIC drivers return more data than
3399 they actually received.
3401 - UDP packets are now stored in aligned data structures.
3403 - A logic error in omapi interface code was repaired that might result in
3404 incorrectly indicating 'up' state when any flags were set, rather than
3405 specifically the INTERFACE_REQUESTED flag. Thanks to a patch from
3406 Jochen Voss which got to us via Andrew Pollock at Debian.
3408 - A reference leak on binding scopes set by ddns updates was repaired.
3410 - A memory leak in the minires_nsendsigned() function call was repaired.
3411 Effectively, this leaked ~176 bytes per DDNS update.
3413 - In the case where an "L2" DHCP Relay Agent (one that does not set giaddr)
3414 was directly attached to the same broadcast domain as the DHCP server,
3415 the RFC3046 relay agent information option was not being returned to the
3416 relay in the server's replies. This was fixed; the dhcp server no longer
3417 requires the giaddr to reply with relay agent information. Note that
3418 this also improves compatibility with L2 devices that "intercept" DHCP
3419 packets and expect relay agent information even in unicast (renewal)
3420 replies. Thanks to a patch from Pekka Silvonen.
3422 - A bug was fixed where the BOOTP header 'sname' field had a value, the
3423 copy written to persistent storage was actually the contents of the
3426 - A bug was fixed where the nwip virtual option space was referencing
3427 the fqdn option's virtual option space's option cache.
3429 - Timestamp parsing errors that indicated missing "minutes" fields rather
3430 than the actually missing "seconds" fields have been repaired thanks to
3431 a patch from Kevin Steves.
3433 - A grammar error in the dhclient.8 manpage was repaired thanks to a patch
3436 - Several spelling typos were repaired, and some cross-references to other
3437 relevant documents were included in the manpages, thanks to a patch
3438 by Andrew Pollock which got to us via Tomas Pospisek.
3440 - Some bugs were fixed in the 'emergency relay agent options hologram'
3441 which is used to retain relay agent option contents from when the
3442 client was in INIT or REBIND states. This should solve problems where
3443 relay agent options were not echoed from the server, even when giaddr
3446 - dhclient now closes its descriptor to dhclient.leases prior to executing
3447 dhclient-script. Thanks to a patch from Tomas Pospisek.
3449 - The server's "by client-id" and "by hardware address" hash table lists
3450 are now sorted according to the preference to re-allocate that lease to
3451 returning clients. This should eliminate pool starvation problems
3452 arising when "INIT" clients were given new leases rather than presently
3455 Changes since 3.0.5rc1
3457 - A bug was repaired in fixes to the dhclient, which sought to run the
3458 dhclient-script with the 'EXPIRE' state should it receive a NAK in
3459 response to a REQUEST. The client now iterates the PREINIT state
3460 after the EXPIRE state, so that interfaces that might be configured
3461 'down' can be brought back 'up' and initialized.
3463 - DHCPINFORM handling for clients that properly set ciaddr and come to the
3464 server via a relay aget has been repaired.
3468 - A warning that host statements declared within subnet or shared-network
3469 scopes are actually global has been added.
3471 - The default minimum lease time (if min-lease-time was not specified)
3472 was raised from 0 to 300. 0 is not thought to be sensible, and is
3473 known to be damaging.
3475 - Added additional fatal error sanity checks surrounding lease binding
3476 state count calculations (free/active counts used for failover pool
3479 - Some time value size fixes in 3.0.4 brought on from FreeBSD /usr/ports were
3480 misapplied to server values rather than client values. The server no longer
3481 advertises 8-byte lease-time options when on 64-bit platforms.
3483 - A bug where leases not in ACTIVE state would get billed to billed classes
3484 (classes with lease limitations) was fixed. Non-active leases OFFERed
3485 to clients are no longer billed (but billing is checked before offering).
3487 - The dhcpd.conf.5 manpage was updated in regard to the ddns-domainname
3488 configuration option - the default configuration and results should be
3491 - If the dhclient were to receive a DHCPNAK while it was in the RENEW
3492 state (and consequently, had an active, 'bound' address and related
3493 configuration options), it would fail to 'tear down' this information
3494 before proceeding into INIT state. dhclient now iterates the dhclient-
3495 script with the 'EXPIRE' action to cause these teardowns prior to entering
3496 INIT state. Thanks to a patch from Chris Zimmerman.
3498 - The omapi.1 manpage had some formatting errors repaired thanks to a patch
3499 from Yoshihiko Sarumaru.
3501 - A few lines of code that were failover-specific were moved within
3502 #if defined() clauses so that compilation without failover could be
3505 - The log message emitted when the 'leased-address' value was not available
3506 in dhcpd.conf "executable statements" has been updated to be more helpful.
3507 Manpage information for this value has also been updated.
3509 - Abandoned or dissociated (err condition) leases now remove any related
3510 dynamic dns bindings. Thanks to a patch from Patrick Schoo.
3512 - Attempting to write a new lease file to replace a corrupt (due to
3513 encountering non-retryable errors during writing) lease file should
3514 no longer result in an infinite recursion.
3516 - Host declaration hardware addresses and client identifiers may only be
3517 configured once. dhcpd will now fail to load config files that specify
3518 multiple identifiers (previous versions would silently over-ride the
3519 value with the later configured value).
3521 - Several option codes that have been allocated since our last release
3522 have been named and documented.
3524 - Option names of the form "unknown-123" have been removed from the in-
3525 memory hash tables. In order to support options of these names that
3526 may appear in dhclient.leases or similar in previous versions, the
3527 parser will now find the new option code definition, or mock up a
3528 generic option code definition. This should result in a smooth
3529 transition from one name to the other, as the new name is used to
3532 Changes since 3.0.4rc1
3534 - The dhcp-options.5 manpage was updated to correct indentation errors
3535 thanks to a patch from Jean Delvare.
3537 Changes since 3.0.4b3
3539 - Some manual pages were clarified pursuant to discussion on the dhcp-server
3542 Changes since 3.0.4b2
3544 - Null-termination sensing for certain clients that unfortunately require
3545 it in DHCPINFORM processing was repaired.
3547 - The host-name option and a few others were moved from "X" format to "t"
3548 format to be compatible with new NULL handling functions.
3550 - DHCPINFORM processing is a little more careful about return addressing
3551 its responses, or if responding via a relay. The INFORM related
3552 messages also log the 'effective client ip address' rather than the
3553 client's supplied ciaddr (since some clients produce null ciaddrs).
3555 - The server was inappropriately sending leases to the RESET state in the
3556 event that multiple active leases were found to match a singly-identified
3557 client. This was changed to RELEASED (by accepting a different, ACTIVE
3558 binding, the client is implicitly releasing its lease). This repairs a
3559 bug wherein secondary servers in failover pairs detecting this condition
3560 move leases to RESET, and primaries refuse to accept that state
3561 transition (properly).
3563 - The memset-after-dmalloc() changes made in 3.0.4b1 have been backed out.
3565 Changes since 3.0.4b1
3567 - Command line parsing in omshell was repaired - it no longer closes
3568 STDIN after reading one line.
3570 - The resolver library no longer closes the /etc/resolv.conf file
3571 descriptor it opened twice.
3573 - Changes to trailing NULL removal in 't' option-atoms has been rethought,
3574 it now includes 'd' (domain name) types, and tries hard not to rewind an
3575 option beyond the start of the text field it is un-terminating.
3579 - A DDNS update handling function was misusing the DNS error codes, rather
3580 than the internal generic result enumeration. The result is a confusing
3581 syslog line, logging the wrong condition.
3583 - The DHCP Server was not checking pool balance in the case where it brought
3584 a non-ACTIVE lease out of storage for a client that was returning to use
3585 a lease it once had long ago, and had since expired.
3587 - Failover peers no longer bother to look for free leases to allocate when
3588 they already found the client's ACTIVE lease. DISCOVERs are load balanced
3589 whether freely-allocated or not, unless the server doubts the peer has
3592 - Fixed a bug in dhcrelay agent addition code that suppressed trailing
3593 PAD options - it was suppressing only one trailing PAD option, rather
3594 than the entire block of them.
3596 ! Fixed some unlikely overlapping-region memcpy() bugs in dhcrelay agent
3597 option addition and stripping code. Added a few sanity checks. Although
3598 highly improbable, due to requiring the reception of a DHCP datagram well
3599 in excess of all known to be used physical MTU limitations, it is possible
3600 this may have been used in a stack overflow security vulnerability. Thanks
3601 to a patch from infamous42md.
3603 ! Added some sanity checks to OMAPI connection/authentication code.
3604 Although highly improbable, due to having to deliver in excess of 2^32
3605 bytes of data via the OMAPI channel, not to mention requiring dhcpd to
3606 be able to malloc() a memory region 2^32 bytes in size, it was possible
3607 this might have resulted in a heap overflow security vulnerability.
3608 Thanks to a patch from infamous42md.
3610 - dmalloc() memset()'s the non-debug (data) portion of the allocated
3611 memory to zero. Code that memset()'s the result returned by dmalloc() to
3612 zero is redundant. These redundancies were removed.
3614 - Some type declaration corrections to u_int16_t were made in common/tr.c
3615 (Token Ring support) thanks to a patch from Jason Vas Dias at Red Hat.
3617 - A failover bug that was allowing leases that EXPIRED or were RELEASED
3618 where tsfp and tstp are identical timestamps to languish in these
3619 transitional states has been repaired. As a side effect, lease
3620 databases should be kept more consistent overall, not just for these
3621 transitional states.
3623 - If the lease db is deleted out from under the daemon, and it moves to rewrite
3624 the db, it will go ahead with the operation and move the new db into place
3625 once it detects the old db does not exist.
3627 - dhclient now ignores IRDA, SIT, and IEEE1394 network interfaces, as it
3628 is either nonsensical or (in the case of IEEE1394) is not known to support
3629 these interfaces. Thanks to Marius Gedminas and Andrew Pollock of Debian.
3631 - Some previously undocumented reasons for dhclient-script invoking has
3632 been documented in the dhclient-script.8 manpage.
3634 - Failover potential expiry calculations (TSTP) have been corrected. Results
3635 should be substantially more consistent, and proper given the constraints.
3637 - Adjusted lease state validation checks in potential-conflict, to
3638 account for possible clock skew similarly to normal state, and several
3639 previously illegal transitions were made legal (ex: active->released).
3641 - An impossible sanity check was removed from omapi/buffer.c, thanks to a
3642 patch from 'infamous42md'.
3644 - An OMAPI host/network byte order problem in lease time values has been
3647 - Several minor bugs, largely relating to treating 8-byte time values as
3648 4-byte entities, have been repaired after careful review of the FreeBSD
3649 ports collection's patch set. Thanks to the nameless entities who have
3650 contributed to the FreeBSD ports.
3652 - When writing a trace file, the file is now created with permissions 0600,
3653 to help administrators avoid accidentally publicising sensitive config
3656 - The calculation of the maximum size of DHCP packets no longer includes
3657 Ethernet framing overhead. The result is that the 'Maximum Message
3658 Size' option advertised by clients, or the default value 576, is no
3659 longer reduced by 14 bytes, and instead directly reflects the IP level
3660 MTU (and the default, minimum allowed IP MTU of 576).
3662 - The special status of RELEASED/EXPIRED/RESET leases when a server
3663 is operating in partner-down was fixed. It no longer requires a
3664 lease be twice the MCLT beyond STOS to 'reallocate', and the expiry
3665 event to turn these into FREE leases without peer acknowledgement
3666 (after STOS+MCLT) has been repaired.
3668 - Compilation on older Solaris systems (lacking /usr/include/sys/int_types.h)
3671 - "append"ing a string onto the end of a "t" type option (such as the
3672 domain-name field) that had been improperly NULL-terminated by the
3673 DHCP server will no longer result in a truncated string containing
3674 only the option from the server, and not the expected appended value.
3675 Thanks to a patch from Jason Vas Dias at Red Hat.
3677 - File handlers on configuration state (config files and lease dbs) should
3678 be treated consistently, regardless of whether TRACING is defined or not.
3680 - The Linux build environment has had some minor improvements - better
3681 sensing of 64-bit pointer sizes (only used for establishing an icmp_id),
3682 and corrections to #if operators regarding LINUX_MAJOR should it ever
3685 - The server now tries harder to survive the condition where it is unable
3686 to open a new lease file to rewrite the lease state database.
3688 Changes since 3.0.3b3
3690 - dhclient.conf documentation for interface {} was updated to reflect recent
3691 discussion on the dhcp-hackers mailing list.
3693 - In response to reports that the software does not compile on GCC 4.0.0,
3694 -Werror was removed from Makefile.conf for all platforms that used it.
3695 We will address the true problem in a future release; this is a temporary
3698 Changes since 3.0.3b2
3700 - An error in code changes introduced in 3.0.3b2 was corrected, which caused
3701 static BOOTP clients to receive random addresses.
3703 Changes since 3.0.3b1
3705 - A bug was fixed in BOOTPREQUEST handling code wherein stale references to
3706 host records would be left behind on leases that were not allocated to the
3707 client currently booting (eg in the case where the host was denied booting).
3709 - The dhcpd.conf.5 manpage was updated to be more clear in regards to
3710 multiple host declarations (thanks to Vincent McIntyre). 'Interim' style
3711 dynamic updates were also retouched.
3715 - A bug was fixed where a server might load balance a DHCP REQUEST to its
3716 peer after already choosing not to load balance the preceding DISCOVER.
3717 The peer cannot allocate the originating server's lease.
3719 - In the case where a secondary server lost its stable storage while the
3720 primary was still in communications-interrupted, and came back online,
3721 the lease databases would not be fully transferred to the secondary.
3722 This was due to the secondary errantly sending an extra UPDREQ message
3723 when the primary made its state transition to PARTNER-DOWN known.
3725 - The package will now compile cleanly in gcc 3.3 and 3.4. As a side effect,
3726 lease structures will be 9 bytes smaller on all platforms. Thanks to
3727 Jason Vas Dias at Red Hat.
3729 - Interface discovery code in DISCOVER_UNCONFIGURED mode is now
3730 properly restricted to only detecting broadcast interfaces. Thanks
3731 to a patch from Jason Vas Dias at Red Hat.
3733 - decode_udp_ip_header was changed so that the IP address was copied out
3734 to a variable, rather than referenced by a pointer. This enforces 4-byte
3735 alignment of the 32-bit IP address value. Thanks to a patch from Dr.
3738 - An incorrect log message was corrected thanks to a patch from
3741 - A bug in DDNS was repaired, where if the server's first DDNS action was
3742 a DDNS removal rather than a DDNS update, the resolver library's
3743 retransmit timer and retry timer was set to the default, implying a
3744 15 second timeout interval. Which is a little excessive in a synchronous,
3745 single-threaded system. In all cases, ISC DHCP should now hold fast to
3746 a 1-second timeout, trying only once.
3748 - The siaddr field was being improperly set to the server-identifier when
3749 responding to DHCP messages. RFC2131 clarified the siaddr field as
3750 meaning the 'next server in the bootstrap process', eg a tftp server.
3751 The siaddr field is now left zeroed unless next-server is configured.
3753 - mockup_lease() could have returned in an error condition (or in the
3754 condition where no fixed-address was found matching the shared
3755 network) with stale references to a host record. This is probably not
3756 a memory leak since host records generally never die anyway.
3758 - A bug was repaired where failover servers would let stale client identifiers
3759 persist on leases that were reallocated to new clients not sending an id.
3761 - Binding scopes ("set var = value;") are now removed from leases allocated
3762 by failover peers if the lease had expired. This should help reduce the
3763 number of stale binding scopes on leases.
3765 - A small memory leak was closed involving client identifiers larger than
3766 7 bytes, and failover.
3768 - Configuring a subnet in dhcpd.conf with a subnet mask of 32 bits might
3769 cause an internal function to overflow heap. Thanks to Jason Vas Dias
3772 - Some inconsistencies in treating numbers that the lexer parsed as 'NUMBER'
3773 or 'NUMBER_OR_NAME' was repaired. Hexadecimal parsing is affected, and
3776 - In several cases, parse warnings were being issued before the lexical
3777 token had been advanced to the token whose value was causing an error...
3778 causing parse warnings to claim the problem is on the wrong token.
3780 - Host declarations matching on client identifier for dynamic leases will
3781 no longer match fixed-address host declarations (this is now identical
3782 to behaviour for host records matching on hardware address).
3784 Changes since 3.0.2rc3
3786 - A previously undocumented configuration directive, 'local-address',
3787 was documented in the dhcpd.conf manpage.
3789 Changes since 3.0.2rc2
3791 - Two variables introduced in 3.0.2b1 were used without being initialized
3792 in the case where neither the FILE nor SNAME fields were available for
3793 overloading. This was repaired.
3795 - A heretofore believed to be impossible corner case of the option
3796 overloading implementation turned out to be possible ("Unable to sort
3797 overloaded options after 10 tries."). The implementation was reworked
3798 to consider the case of an option so large it would require more than
3799 three chunks to fit.
3801 - Many other instances of variables being used without being initialized
3804 - An uninitialized variable in omapi_io_destroy() led to the discovery
3805 that this function may result in orphaned pointers (and hence, a memory
3808 Changes since 3.0.2rc1
3810 - allocate_lease() was rewritten to repair a bug in which the server would
3811 try to allocate an ABANDONED lease when FREE leases were available.
3813 Changes since 3.0.2b1
3815 - Some dhcp-eval.5 manpage formatting was repaired.
3819 - A bug was fixed in the server's 'option overloading' implementation,
3820 where options loaded into the 'file' and 'sname' packet fields were
3821 not aligned precisely as rfc2131 dictates.
3823 - The FreeBSD client script was changed to support the case where a domain
3824 name was not provided by the server.
3826 - A memory leak in 'omshell' per each command line parsed was
3827 repaired, thanks to a patch from Jarkko Torppa.
3829 - Log functions writing to stderr were adjusted to use the STDERR_FILENO
3830 system definition rather than '2'. This is a no-op for 90% of platforms.
3832 - One call to trace_write_packet_iov() counted the number of io vectors
3833 incorrectly, causing inconsistent tracefiles. This was fixed.
3835 - Some expression parse failure memory leaks were closed.
3837 - A host byte order problem in tracefiles was repaired.
3839 - Pools configured in DHCPD for failover possessing permission lists that
3840 previously were assumed to not include dynamic bootp clients are now
3841 a little more pessimistic. The result is, dhcpd will nag you about just
3842 about most pools that possess a 'allow' statement with no 'deny' that
3843 would definitely match a dynamic bootp client.
3845 - The 'ddns-update-style' configuration warning bit now insists that
3846 the configuration be globally scoped.
3848 - Two memory leaks in dhclient were closed thanks to a patch from Felix
3851 - Some minor but excellently pedantic documentation errors were fixed
3852 thanks to a patch from Thomas Klausner.
3854 - Bugs in operator precedence in executable statements have been repaired
3855 once again. More legal syntaxes should be parsed legally.
3857 - Failing to initialize a tracefile for any reason if a tracefile was
3858 specified is now a fatal error. Thanks to a patch from Albert Herranz.
3860 - Corrected a bug in which the number of leases transferred as calculated
3861 by the failover primary and sent to peers in POOLRESP responses may be
3862 incorrect. This value is not believed to be used by other failover
3863 implementations, excepting perhaps as logged information.
3865 - Corrected a bug in which 'dhcp_failover_send_poolresp()' was in fact
3866 sending POOLREQ messages instead of POOLRESP mesasges. This message
3867 was essentially ignored since failover secondaries effectively do not
3868 respond to POOLREQ messages.
3870 - Type definitions for various bitwidths of integers in the sunos5-5
3871 build of ISC DHCP have been fixed. It should compile and run more
3872 easily when built in 64-bit for this platform.
3874 - "allow known-clients;" is now a legal syntax, to avoid confusion.
3876 - If one dhcp server chooses to 'load balance' a request to its failover
3877 peer, it first checks to see if it believes said peer has a free
3878 lease to allocate before ignoring the DISCOVER.
3880 - log() was logging a work buffer, rather than the value returned by
3881 executing the statements configured by the user. In some cases,
3882 the work buffer and the intended results were the same. In some other
3883 cases, they were not. This was fixed thanks to a patch from Gunnar
3884 Fjone and directconnect.no.
3886 - Compiler warnings for some string type conversions was fixed, thanks
3887 to Andreas Gustafsson.
3889 - The netbsd build environments were simplified to one, in which
3890 -Wconversion is not used, thanks to Andreas Gustafsson.
3892 - How randomness in the backoff-cutoff dhclient configuration variable
3893 is implemented was better documented in the manpage, and the behaviour
3894 of dhclient in REQUEST timeout handling was changed to match that of
3895 DISCOVER timeout handling.
3897 - Omapi was hardened against clients that pass in null values, thanks
3898 to a patch from Mark Jason Dominus.
3900 - A bug was fixed in dhclient that kept it from doing client-side
3901 ddns updates. Thanks to a patch from Andreas Gustafsson, which
3902 underwent some modification after review by Jason Vas Dias.
3904 - Failover implementations disconnected due to the network between
3905 them (rather than one of the two shutting down) will now try to
3906 re-establish the failover connection every 5 seconds, rather than
3907 to simply try once and give up until one of them is restarted.
3908 Thanks to a patch from Ulf Ekberg from Infoblox, and field testing
3909 by Greger V. Teigre which led to an enhancement to it.
3911 - A problem that kept DHCP Failover secondaries from tearing down
3912 ddns records was repaired. Thanks to a patch from Ulf Ekberg from
3915 - 64bit pointer sizes are detected properly on FreeBSD now.
3917 - A bug was repaired where the DHCP server would leave stale references
3918 to host records on leases it once thought about offering to certain
3919 clients. The result would be to apply host and 'known' scopes to the
3920 wrong clients (possibly denying booting). NOTE: The 'mis-host' patch
3921 that was being circulated as a workaround is not the way this bug was
3922 fixed. If you were a victim of this bug in 3.0.1, you are cautioned
3923 to proceed carefully and see if it fixes your problem.
3925 - A bug was repaired in the server's DHCPINFORM handling, where it
3926 tried to divine the client's address from the source packet and
3927 would get it wrong. Thanks to Anshuman Singh Rawat.
3929 - A log message was introduced to help illuminate the case where the
3930 server was unable to find a lease to assign to any BOOTP client.
3931 Thanks to Daniel Baker.
3933 - A minor dhcpd.conf.5 manpage error was fixed.
3935 Changes since 3.0.1rc14
3937 - The global variable 'cur_time' was centralized and is now uniformly of a
3938 type #defined in system-dependent headers. It had previously been defined
3939 in one of many places as a 32-bit value, and this causes mayhem on 64-bit
3940 big endian systems. It probably wasn't too healthy on little endian
3943 - A printf format string error introduced in rc14 was repaired.
3945 - AIX system-dependent header file was altered to only define NO_SNPRINTF
3946 if the condition used to #ifdef in vsnprintf in AIX' header files
3949 - The Alpha/OSF system-dependent header file was altered to define
3950 NO_SNPRINTF on OS revisions older than 4.0G.
3952 - omapip/test.c had string.h added to its includes.
3954 Changes since 3.0.1rc13
3956 ! CAN-2004-0460 - CERT VU#317350: Five stack overflow exploits were closed
3957 in logging messages with excessively long hostnames provided by the
3958 clients. It is highly probable that these could have been used by
3959 attackers to gain arbitrary root access on systems using ISC DHCP 3.0.1
3960 release candidates 12 or 13. Special thanks to Gregory Duchemin for
3961 both finding and solving the problem.
3963 ! CAN-2004-0461 - CERT VU#654390: Once the above was closed, an opening
3964 in log_*() functions was evidenced, on some specific platforms where
3965 vsnprintf() was not believed to be available and calls were wrapped to
3966 sprintf() instead. Again, credit goes to Gregory Duchemin for finding
3967 the problem. Calls to snprintf() are now linked to a distribution-local
3968 snprintf implementation, only in those cases where the architecture is
3969 not known to provide one (see includes/cf/[arch].h). If you experience
3970 linking problems with snprintf/vsnprintf or 'isc_print_' functions, this
3971 is where to look. This vulnerability did not exist in any previously
3972 published version of ISC DHCP.
3974 - Compilation on hpux 11.11 was repaired.
3976 - 'The cross-compile bug fix' was backed out.
3978 Changes since 3.0.1rc12
3980 - Fixed a bug in omapi lease lookup function, to form the hardware
3981 address for the hash lookup correctly, thanks to a patch from
3984 - Fixed a bug where dhcrelay was sending relayed responses back to the
3985 broadcast address, but with the source's unicast mac address. Should
3986 now conform to rfc2131 section 4.1.
3988 - Cross-compile bug fix; use $(AR) instead of ar. Thanks to Morten Brorup.
3990 - Fixed a crash bug in dhclient where dhcpd servers that do not provide
3991 renewal times results in an FPE. As a side effect, dhclient can now
3992 properly handle 0xFFFFFFFF (-1) expiry times supplied by servers. Thanks
3993 to a patch from Burt Silverman.
3995 - The 'ping timeout' debugs from rc12 were removed to -DDEBUG only,
3996 and reformatted to correct a compilation error on Solaris platforms.
3998 - A patch was applied which fixes a case where leases read from the
3999 leases database do not properly over-ride previously read leases.
4001 - dhcpctl.3 manpage was tweaked.
4003 Changes since 3.0.1rc11
4005 - A patch from Steve Campbell was applied with minor modifications to
4006 permit reverse dns PTR record updates with values containing spaces.
4008 - A patch from Florian Lohoff was applied with some modifications to
4009 dhcrelay. It now discards packets whose hop count exceeds 10 by default,
4010 and a command-line option (-c) can be used to set this threshold.
4012 - A failover bug relating to identifying peers by name length instead of
4015 - Declaring failover configs within shared-network statements should no
4016 longer result in error.
4018 - The -nw command line option to dhclient now works.
4020 - Thanks to a patch from Michael Richardson:
4021 - Some problems with long option processing have been fixed.
4022 - Some fixes to minires so that updates of KEY records will work.
4024 - contrib/ms2isc was updated by Shu-Min Chang of the Intel Corporation.
4025 see contrib/ms2isc/readme.txt for revision notes.
4027 - Dhclient no longer uses shell commands to kill another instance of
4028 itself, it sends the signal directly. Thanks to a patch from Martin
4031 - The FreeBSD dhclient-script was changed so that a failure to write to
4032 /etc/resolv.conf does not prematurely end the script. This keeps dhclient
4033 from looping infinitely when this is the case. Thanks to a patch from
4036 - A patch from Bill Stephens was applied which resolves a problem with lease
4037 expiry times in failover configurations.
4039 - A memory leak in configuration parsing was closed thanks to a patch from
4042 - The function which discovers interfaces will now skip non-broadcast or
4043 point-to-point interfaces, thanks to a patch from David Brownlee.
4045 - Options not yet known by the dhcpd or dhclient have had their names
4046 changed such that they do not contain # symbols, in case they should ever
4047 appear in a lease file. An option that might have been named "#144" is
4050 - Another patch from Bill Stephens which allows the ping-check timeout to
4051 be configured as 'ping-timeout'. Defaults to 1.
4053 Changes since 3.0.1rc10
4055 - Potential buffer overflows in minires repaired.
4057 - A change to the linux client script to use /bin/bash, since /bin/sh may
4060 - Some missing va_end cleanups thanks to a patch from Thomas Klausner.
4062 - A correction of boolean parsing syntax validation - some illegal syntaxes
4063 that worked before are now detected and produce errs, some legal syntaxes
4064 that errored before will now work properly.
4066 - Some search-and-replace errors that caused some options to change their
4069 - Shu-min Chang of the Intel corporation has contributed a perl script and
4070 module that converts the MS NT4 DHCP configuration to a ISC DHCP3
4073 - Applied the remainder of the dhcpctl memory leak patch provided by Bill
4074 Squier at ReefEdge, Inc. (groo@reefedge.com).
4076 - Missing non-optional failover peer configurations will now result in a soft
4077 error rather than a null dereference.
4079 Changes since 3.0.1rc9
4081 - A format string was corrected to fix compiler warnings.
4083 - A number of spelling corrections were made in the man pages.
4085 - The dhclient.conf.5 man page was changed to refer to do-forward-updates
4086 rather than a configuration option that doesn't exist.
4088 - A FreeBSD-specific bug in the interface removal handling was fixed.
4090 - A Linux-specific Token Ring detection problem was fixed.
4092 - Hashes removed from as-yet-unknown agent options, having those options
4093 appear in reality before we know about them will no longer produce
4094 self-corrupting lease databases.
4096 - dhclient will use the proper port numbers now when using the -g option.
4098 - A order-of-operations bug with 2 match clauses in 1 class statement is
4099 fixed thanks to a patch from Andrew Matheson.
4101 - Compilation problems on Solaris were fixed.
4103 - Compilation problems when built with DEBUG or DEBUG_PACKET were repaired.
4105 - A fix to the dhcp ack process which makes certain group options will be
4106 included in the first DHCPOFFER message was made thanks to a patch from
4109 - A few memory leaks were repaired thanks to patches from Bill Squier at
4110 ReefEdge, Inc. (groo@reefedge.com).
4112 - A fix for shared-networks that sometimes give clients options for the
4113 wrong subnets (in particular, 'option routers') was applied, thanks to
4114 Ted Lemon for the patch.
4116 - Omshell's handling of dotted octets as values was changed such that dots
4117 one after the other produce zero values in the integer string.
4119 Changes since 3.0.1rc8
4121 - Fix a format string vulnerability in the server that could lead to a
4122 remote root compromise (discovered by NGSEC Research Team, www.ngsec.com).
4124 - Add additional support for NetBSD/sparc64.
4126 - Fix a bug in the command-line parsing of the client. Also, resolve
4129 - Add better support for shells other than bash in the Linux client
4132 - Various build fixes for modern versions of FreeBSD and Linux.
4134 - Fix a bad bounds check when printing binding state names.
4136 - Clarify documentation about fixed-address and multiple addresses.
4138 - Fix a typo in the authoritative error message.
4140 - Make a log entry when we can't write a billing class.
4142 - Use conversion targets that are the right size on all architectures.
4144 - Increment the hop count when relaying.
4146 - Log a message when lease state is changed through OMAPI.
4148 - Don't rerun the shared_network when evaluating the pool.
4150 - Fix a reversed test in the parser.
4152 - Change the type of rbuf_max.
4154 - Make FTS_LAST a manifest constant to quiet warnings.
4156 Changes since 3.0.1rc7
4158 - Fix two compiler warnings that are generated when compiling on Solaris
4159 with gcc. These stop the build, even though they weren't actually
4160 errors, because we prefer that our builds generate no warnings.
4162 Changes since 3.0.1rc6
4164 - Don't allow a lease that's in the EXPIRED, RELEASED or RESET state
4167 - Implement lease stealing for cases where the primary has fewer leases
4168 than the secondary, as called for by the standard.
4170 - Add a fudge factor to the lease expiry acceptance code, (suggested
4171 by Kevin Miller of CMU).
4173 - Fix a bug in permit_list_match that made it much too willing to say
4174 that two permit lists matched.
4176 - Unless DEBUG_DNS_UPDATES is defined, print more user-friendly (and
4177 also more compact) messages about DNS updates.
4179 - Fix a bug in generating wire-format domain names for the FQDN option.
4181 - Fix a bug where the FQDN option would not be returned if the client
4182 requested it, contrary to the standard.
4184 - On Darwin, use the FreeBSD DHCP client script.
4186 - On NetBSD/sparc, don't check for casting warnings.
4188 - Add a flag in the DHCP client to disable updating the client's A
4189 record when sending an FQDN option indicating that the client is
4190 going to update its A record.
4192 - In the client, don't attempt a DNS update until one second after
4193 configuring the new IP address, and if the update times out, keep
4194 trying until a response, positive or negative, is received from the
4197 - Fix an uninitialized memory bug in the DHCP client.
4199 - Apply some FreeBSD-specific bug fixes suggested by Murray Stokely.
4201 - Fix a bug in ns_parserr(), where it was returning the wrong sort
4202 of result code in some cases (suggested by Ben Harris of the
4205 - Fix a bug in is_identifier(), where it was checking against EOF
4206 instead of the END_OF_FILE token (also suggested by Ben Harris).
4208 - Fix a bug where if an option universe contained no options, the
4209 DHCP server could dump core (Walter Steiner).
4211 - Fix a bug in the handling of encapsulated options.
4213 - Fix a bug that prevented NWIP suboptions from being processed.
4215 - Delete the FTS_BOOTP and FTS_RESERVED states and implement them
4216 as modifier flags to the FTS_ACTIVE state, as called for in the
4217 failover protocol standard.
4219 - Fix bugs in the pool merging code that resulted in references and
4220 dereferences of null pointers. This bug had no impact unless the
4221 POINTER_DEBUG flag was defined.
4223 - In the server, added a do-forward-updates flag that can be used to
4224 disable forward updates in all cases, so that sites that want the
4225 clients to take sole responsibility for updating their A record can
4228 - Make it possible to disable optimization of PTR record updates.
4230 Changes since 3.0.1rc5
4232 - Include some new documentation and changes provided by Karl Auer.
4234 - Add a workaround for some Lexmark printers that send a double-NUL-
4235 terminated host-name option, which would break DNS updates.
4237 - Fix an off-by-one error in the MAC-address checking code for
4238 DHCPRELEASE that was added in 3.0.1rc5.
4240 - Fix a bug where client-specific information was not being discarded
4241 from the lease when it expired or was released, resulting in
4242 problems if the lease was reallocated to a different client.
4244 - If more than one allocation pool is specified that has the same set
4245 of constraints as another allocation pool on the same shared
4246 network, merge the two pools.
4248 - Don't print an error in fallback_discard, since this just causes
4249 confusion and does not appear to be helping to encourage anyone to
4252 Changes since 3.0.1rc4
4254 - Fix a bug that would cause the DHCP server to spin if asked to parse
4255 a certain kind of incorrect statement.
4257 - Fix a related bug that would prevent an error from being reported in
4260 - Additional documentation.
4262 - Make sure that the hardware address matches the lease when
4263 processing a DHCPRELEASE message.
4265 Changes since 3.0.1rc3
4267 - A minor bug fix in the arguments to a logging function call.
4268 - Documentation update for dhcpd.conf.
4270 Changes since 3.0.1rc2
4272 - Allow the primary to send a POOLREQ message. This isn't what the current
4273 failover draft says to do, so we may have to back it out if I can't get the
4274 authors to relent, but the scheme for balancing that's specified in the
4275 current draft seems needlessly hairy, so I'm floating a trial balloon.
4276 The rc1 code did not implement the method described in the draft either.
4278 Changes since 3.0.1rc1
4280 - Treat NXDOMAIN and NXRRSET as success when we are trying to delete a
4281 domain or RRSET. This allows the DHCP server to forget about a name
4282 it added to the DNS once it's been removed, even if the DHCP server
4283 wasn't the one that removed it.
4285 - Install defaults for failover maximum outstanding updates and maximum
4286 silent time. This prevents problems that might occur if these values
4287 were not configured.
4289 - Don't do DDNS deletes if ddns-update-style is none.
4291 - Return relay agent information options in DHCPNAK. This prevents DHCPNAK
4292 messages from being dropped when the relay agent information option contains
4293 routing information.
4295 - Fix a problem where coming up in recover wouldn't result in an update
4298 - Add some more chatty messages when we start a recovery update and when it's
4301 - Fix a possible problem where some state might have been left around
4302 after the peer lost contact and regained contact about how many updates
4305 - Don't nix a lease update because of a lease conflict. This test has
4306 never (as far as I know) prevented a mistake, and it appears to cause
4307 problems with failover.
4309 - Add support in rc history code for keeping a selective history, rather
4310 than a history of all references and dereferences. This code is only used
4311 when extensive additional debugging is enabled.
4315 - Make allocators for hash tables. As a side effect, this fixes a memory
4316 smash in the subclass allocation code.
4318 - Fix a small bug in omshell where if you try to close an object when
4319 no object is open, it dumps core.
4321 - Fix an obscure coredump that could occur on shutdown.
4323 - Fix a bug in the recording of host declaration rubouts in the lease file.
4325 - Fix two potential spins in the host deletion code.
4327 - Fix a core dump that would happen if an application tried to update
4328 a host object attribute with a null value.
4330 Changes since 3.0 Release Candidate 12
4332 - Fix a memory leak in the evaluation code.
4334 - Fix an obscure core dump.
4336 - Print a couple of new warnings when parsing the configuration file
4337 when crucial information is left out.
4339 - Log "no free leases" as an error.
4341 - Documentation updates.
4343 Changes since 3.0 Release Candidate 11
4345 - Always return a subnet selection option if one is sent.
4347 - Fix a warning that was being printed because an automatic data
4348 structure wasn't zeroed.
4350 - Fix some failover state transitions that were being handled
4353 - When supersede_lease is called on a lease whose end time has already
4354 expired, but for which a state transition has not yet been done, do
4355 a state transition. This fixes the case where if the secondary
4356 allocated a lease to a client and the lease "expired" while the
4357 secondary was in partner-down, no expiry event would actually
4358 happen, so the lease would remain active until the primary was
4361 Changes since 3.0 Release Candidate 10
4363 - Fix a bug that was preventing released leases from changing state
4364 in failover-enabled pools.
4366 - Fix a core dump in the client identifier finder code (for host
4369 - Finish fixing a bug where bogus data would sometimes get logged to
4370 the dhclient.leases file because it was opened as descriptor 2.
4372 - Fix the Linux dhclient-script according to suggestions made by
4373 several people on the dhcp-client mailing list.
4375 - Log successful DNS updates at LOG_INFO, not LOG_ERROR.
4377 - Print an error message and refuse to run if a failover peer is
4378 defined but not referenced by any pools.
4380 - Correct a confusing error message in failover.
4382 Changes since 3.0 Release Candidate 9
4384 - Fix a bug in lease allocation for Dynamic BOOTP clients.
4386 Changes since 3.0 Release Candidate 8 Patchlevel 2
4388 - Fix a bug that prevented update-static-leases from working.
4390 - Document failover-state OMAPI object.
4392 - Fix a compilation error on SunOS 4.
4394 Changes since 3.0 Release Candidate 8 Patchlevel 1
4396 - Fix a parsing bug that broke dns updates (both interim and ad-hoc).
4397 This was introduced in rc8pl1 as an unintended result of the memory
4398 leakage fixes that were in pl1.
4400 - Fix a long-standing bug where the server would record that an update
4401 had been done for a client with no name, even though no update had
4402 been done, and then when the client's lease expired the deletion of
4403 that nonexistant record would time out because the name was the null
4406 - Clean up the omshell, dhcpctl and omapi man pages a bit.
4408 Changes since 3.0 Release Candidate 8
4410 - Fix a bug that could cause the DHCP server to spin if
4411 one-lease-per-client was enabled.
4413 - Fix a bug that was causing core dumps on BSD/os in the presence of
4416 - In partner-down state, don't restrict lease lengths to MCLT.
4418 - On the failover secondary, record the MCLT received from the primary
4419 so that if we come up without a connection to the primary we don't
4420 wind up giving out zero-length leases.
4422 - Fix some compilation problems on BSD/os.
4424 - Fix a bunch of memory leaks.
4426 - Fix a couple of bugs in the option printer.
4428 - Fix an obscure error reporting bug in the dns update code, and also
4429 make the message clearer when a key algorithm isn't supported.
4431 - Fix a bug in the tracing code that prevented trace runs that used
4432 tcp connections from being played back.
4434 - Add some additional debugging capability for catching memory leaks
4437 - Make the client release the lease correctly on shutdown.
4439 - Add some configurability to the build system.
4441 - Install omshell manual page in man1, not man8.
4443 - Craig Gwydir sent in a patch that fixes a long-standing bug in the
4444 DHCP client that could cause core dumps, but that for some reason
4445 hadn't been noticed until now.
4447 Changes since 3.0 Release Candidate 7
4449 - Fix a bug in failover where we weren't sending updates after a
4450 transition from communications-interrupted to normal.
4452 - Handle expired/released/reset -> free transition according to the
4453 protocol specification (this works - the other way not only wasn't
4454 conformant, but also didn't work).
4456 - Add a control object in both client and server that allows either
4457 daemon to be shut down cleanly.
4459 - When writing a lease, if we run out of disk space, shut down the
4460 output file and insist on writing a new one before proceeding.
4462 - In the server, if the OMAPI listener port is occupied, keep trying
4463 to get it, rather than simply giving up and exiting.
4465 - Support fetching variables from leases and also updating and adding
4466 variables to leases via OMAPI.
4468 - If two failover peers have wildly different clocks, refuse to start
4471 - Fix a bug in the DNS update code that could cause core dumps when
4472 running on alpha processors.
4474 - Fixed a bug in ddns updates for static lease entries, thanks to a
4475 patch from Andrey M Linkevitch.
4477 - Add support for Darwin/MacOS X
4479 - Install omshell (including new documentation).
4481 - Support DNS updates in the client (this is a very obscure feature
4482 that most DHCP client users probably will not be able to use).
4484 - Somewhat cleaner status logging in the client.
4486 - Make OMAPI key naming syntax compatible with the way keys are
4487 actually named (key names are domain names).
4489 - Fix a bug in the lease file writer.
4491 - Install DHCP ISC headers in a different place than BIND 9 ISC
4492 headers, to avoid causing trouble in BIND 9 builds.
4494 - Don't send updates for attributes on an object when the attributes
4495 haven't changed. Support deleting attributes on remote objects.
4497 - Fix a number of bugs in omshell, and add the unset and refresh
4500 - Handle disconnects in OMAPI a little bit more intelligently (so that
4501 the caller gets ECONNRESET instead of EINVAL).
4503 - Fix a bunch of bugs in the handling of clients that have existing
4504 leases when the try to renew their leases while failover is
4507 Changes since 3.0 Release Candidate 6
4509 - Fix a core dump that could happen when processing a DHCPREQUEST from
4510 a client that had a host declaration that contained both a
4511 fixed-address declaration and a dhcp-client-identifier option
4512 declaration, if the client identifier was longer than nine bytes.
4514 - Fix a memory leak that could happen in certain obscure cases when
4515 using omapi to manipulate leases.
4517 - Fix some bugs and omissions in omshell.
4519 Changes since 3.0 Release Candidate 5
4521 - Fix a bug in omapi_object_dereference that prevented objects in
4522 chains from having their reference counts decreased on dereference.
4524 - Fix a bug in omapi_object_dereference that would prevent object
4525 chains from being freed upon removal of the last reference external
4528 - Fix a number of other memory leaks in the OMAPI protocol subsystem.
4530 - Add code in the OMAPI protocol handler to trace memory leakage.
4532 - Clean up the memory allocation/reference history printer.
4534 - Support input of dotted quads and colon-separated hex lists as
4535 attribute values in omshell.
4537 - Fix a typo in the Linux interface discovery code.
4539 - Conditionalize a piece of trace code that wasn't conditional.
4541 Changes since 3.0 Release Candidate 4
4543 - Fix a bug that would prevent leases from being abandoned properly on
4546 - Fix failover peer OMAPI support.
4548 - In failover, correctly handle expiration of leases. Previously,
4549 leases would never be reclaimed because they couldn't make the
4550 transition from EXPIRED to FREE.
4552 - Fix some broken failover state transitions.
4554 - Documentation fixes.
4556 - Take out an unnecessary check in DHCP relay agent information option
4557 stashing code that was preventing REBINDING clients from rebinding.
4559 - Prevent failover peers from allocating leases in DHCPREQUEST
4560 processing if the lease belongs to the other server.
4562 - Record server version in lease file introductory comment.
4564 - Correctly report connection errors in OMAPI and failover.
4566 - Make authentication signature algorithm name comparisons in OMAPI
4569 - Fix compile problem on SunOS 4.x
4571 - If a signature algorithm is not terminated with '.', terminate it so
4572 that comparisons between fully-qualified names will work
4575 - Different SIOCGIFCONF probe code, may "fix" problem on some Linux
4576 systems with the probe not working correctly.
4578 - Don't allow user to type omapi key on command line of omshell.
4580 Changes since 3.0 Release Candidate 3
4582 - Do lease billing on startup in a way that I *think* will finally do
4583 the billing correctly - the previous method could overbill as a
4584 result of duplicate leases.
4586 - Document OMAPI server objects.
4588 Changes since 3.0 Release Candidate 2 Patchlevel 1
4590 - Fix some problems in the DDNS update code. Thanks to Albert
4591 Herranz for figuring out the main problem.
4593 - Fix some reference counting errors on host entries that were causing
4596 - Fix a byte-swap bug in the token ring code, thanks to Jochen
4599 - Fix a bug in lease billing, thanks to Jonas Bulow.
4601 Changes since 3.0 Release Candidate 2
4603 - Change the conditions under which a DHCPRELEASE is actually
4604 committed to be consistent with lease binding states rather than
4605 using the lease end time. This may fix some problems with the
4608 - Fix a bug where lease updates would fail on Digital Unix (and maybe
4609 others) because malloc was called with a size of zero.
4611 - Fix a core dump that happens when the DHCP server can't create its
4614 Changes since 3.0 Release Candidate 1 Patchlevel 1
4616 - Fix the dhcp_failover_put_message to not attempt to allocate a
4617 zero-length buffer. Some versions of malloc() fail if you try to
4618 allocate a zero-length buffer, and this was causing problems on,
4621 - Fix a case where the failover code was printing an error message
4622 when no error had occurred.
4624 - Fix a problem where when a server went down and back up again, the
4625 peer would not see a state transition and so would stay in the
4626 non-communicating state.
4628 - Be smart about going into recover_wait.
4630 - Fix a problem in the failover implementation where peers would fail
4631 to come into sync if interrupted in the RECOVER state. This could
4632 have been the cause of some problems people have reported recently.
4634 - Fix a problem with billing classes where they would not be unbilled
4635 when the client lease expired.
4637 - If select fails, figure out which descriptor is bad, and cut it out
4638 of the I/O loop. This prevents a potentially nasty spin. I
4639 haven't heard any report it in a while, but it came up consistently
4642 - Fix a bug in the relay agent where if you specified interfaces on
4643 the command line, it would fail.
4645 - Fix a couple of small bugs in the omapi connection object (no known
4648 - Add the missing 3.0 Beta 1 lease conversion script.
4650 - Read dhcp client script hooks if they exist, rather than only if
4653 Changes since 3.0 Release Candidate 1
4655 - Fix a memory smash that happens when fixed-address leases are used.
4656 ANY SITE AT WHICH FIXED-ADDRESS STATEMENTS ARE BEING USED SHOULD
4657 UPGRADE IMMEDIATELY. This has been a long-standing bug - thanks to
4658 Alvise Nobile for discovering it and helping me to find it!
4660 - Fix a small bug in binary-to-ascii, thanks to H. Peter Anvin of
4663 - There is a known problem with the DHCP server doing failover on
4664 Compaq Alpha systems. This patchlevel is not a release candidate
4665 because of this bug. The bug should be straightforward to fix, so
4666 a new release candidate is expected shortly.
4668 - There is a known problem in the DDNS update code that is probably a
4669 bug, and is not, as far as we know, fixed in this patchlevel.
4671 Changes since 3.0 Beta 2 Patchlevel 24
4673 - Went over problematic failover state transitions and made them all
4674 work, so that failover should now much less fragile.
4676 - Add some dhcpctl and omapi documentation
4678 - Fix compile errors when compiling with unusual predefines.
4680 - Make Token Ring work on Linux 2.4
4682 - Fix the Digital Unix BPF_WORDALIGN bug.
4684 - Fix some dhcp client documentation errors.
4686 - Update some parts of the README file.
4688 - Support GCC on SCO.
4690 Changes since 3.0 Beta 2 Patchlevel 23
4692 - Fix a bug in the DNS update code where a status code was not being
4693 checked. This may have been causing core dumps.
4695 - When parsing the lease file, if a lease declaration includes a
4696 billing class statement, and the lease already has a billing class,
4697 unbill the old class.
4699 - When processing failover transactions, where acks will be deferred,
4700 process the state transition immediately.
4702 - Don't try to use the new SIOCGIFCONF buffer size detection code on
4703 Linux 2.0, which doesn't provide this functionality.
4705 - Apply a patch suggested by Tuan Uong for a problem in dlpi.c.
4707 - Fix a problem in using the which command in the configure script.
4709 - Fix a parse error in the client when setting up an omapi listener.
4711 - Document the -n and -g flags to the client.
4713 - Make sure there is always a stdin and stdout on startup. This
4714 prevents shell scripts from accidentally writing error messages into
4715 configuration files that happen to be opened as stderr.
4717 - If an interface is removed, the client will now notice that it is
4718 gone rather than spinning. This has only been tested on NetBSD.
4720 - The client will attempt to get an address even if it can't create a
4723 - Don't overwrite tracefiles.
4725 - Fix some memory allocation bugs in failover.
4727 Changes since 3.0 Beta 2 Patchlevel 22
4729 - Apply some patches suggested by Cyrille Lefevre, who is maintaining
4730 the FreeBSD ISC DHCP Distribution port.
4732 - Fix a core dump in DHCPRELEASE.
4734 Changes since 3.0 Beta 2 Patchlevel 21
4736 - This time for sure: fix the spin described in the changes for pl20.
4738 Changes since 3.0 Beta 2 Patchlevel 20
4740 - Fix a problem with Linux detecting large numbers of interfaces (Ben)
4742 - Fix a memory smash in the quotify code, which was introduced in
4745 - Actually fix the spin described in the changes for pl20. The
4746 previous fix only partially fixed the problem - enough to get it
4747 past the regression test.
4749 Changes since 3.0 Beta 2 Patchlevel 19
4751 - Fix a bug that could cause the server to abort if compiled with
4752 POINTER_DEBUG enabled.
4754 - Fix a bug that could cause the server to spin when responding to a
4757 - Apply Joost Mulders' suggested patches for DLPI on x86.
4759 - Support NUL characters in quoted strings.
4761 - Install unformatted man pages on SunOS.
4763 Changes since 3.0 Beta 2 Patchlevel 18
4765 - Allow the server to be placed in partner-down state using OMAPI.
4768 - Implement omshell, which can be used to do arbitrary things to the
4769 server (in theory). (Damien Neil)
4771 - Fix a case where if a client had two different leases the server could
4772 actually dereference the second one when it hadn't been referenced,
4773 leading to memory corruption and a core dump. (James Brister)
4775 - Fix a case where a client could request the address of another client's
4776 lease, but find_lease wouldn't detect that the other client had it, and
4777 would attempt to allocate it to the client, resulting in a lease conflict
4780 - Fix a case where a client with more than one client identifier could be
4781 given a lease where the hardware address was correct but the client
4782 identifier was not, resulting in a lease conflict message.
4784 - Fix a problem where the server could write out a colon-separated
4785 hex list as a value for a variable, which would then not parse.
4786 The fix is to always write strings as quoted strings, with any
4787 non-printable characters quoted as octal escape sequences. So
4788 a file written the old way still won't work, but new files written
4791 - Fix documentation for sending non-standard options.
4793 - Use unparsable names for unknown options. WARNING: this will
4794 break any configuration files that use the option-nnn convention.
4795 If you want to continue to use this convention for some options,
4796 please be sure to write a definition, like this:
4798 option option-nnn code nnn = string;
4800 You can use a descriptive name instead of option-nnn if you like.
4802 - Fix a problem where we would see a DHCPDISCOVER/DHCPOFFER/
4803 DHCPREQUEST/DHCPACK/DHCPREQUEST/DHCPNAK sequence. This was the
4804 result of a deceptively silly bug in supersede_lease.
4806 - Fix client script exit status check, according to a fix supplied by
4809 - Fix an endianness bug in the tracefile support, regarding ICMP
4812 - Fix a bug in the client where the medium would not work correctly if
4813 it contained quoted strings.
4815 ** there was no pl17 **
4817 Changes since 3.0 Beta 2 Patchlevel 16
4819 - Add support for transaction tracing. This allows the state of the
4820 DHCP server on startup, and all the subsequent transactions, to be
4821 recorded in a file which can then be played back to reproduce the
4822 behaviour of the DHCP server. This can be used to quickly
4823 reproduce bugs that cause core dumps or corruption, and also for
4824 tracking down memory leaks.
4826 - Incorporate some bug fixes provided by Joost Mulders for the DLPI
4827 package which should clear up problems people have been seeing on
4830 - Fix bugs in the handling of options stored as linked lists (agent
4831 options, fqdn options and nwip options) that could cause memory
4832 corruption and core dumps.
4834 - Fix a bug in DHCPREQUEST handling that resulted in DHCPNAK messages
4835 not being send in some cases when they were needed.
4837 - Make the lease structure somewhat more compact.
4839 - Make initial failover startup *much* faster. This was researched
4840 and implemented by Damien Neil.
4842 - Add a --version flag to all executables, which prints the program
4843 name and version to standard output.
4845 - Don't rewrite the lease file every thousand leases.
4847 - A bug in nit.c for older SunOS machines was fixed by a patch sent in
4848 by Takeshi Hagiwara.
4850 - Fix a memory corruption bug in the DHCP client.
4852 - Lots of documentation updates.
4854 - Add a feature allowing environment variables to be passed to the
4855 DHCP client script on the DHCP client command line.
4857 - Fix client medium support, which had been broken for some time.
4859 - Fix a bug in the DHCP client initial startup backoff interval, which
4860 would cause two DHCPDISCOVERS to be sent back-to-back on startup.
4862 Changes since 3.0 Beta 2 Patchlevel 15
4864 - Some documentation tweaks.
4866 - Maybe fix a problem in the DLPI code.
4868 - Fix some error code space inconsistencies in ddns update code.
4870 - Support relay agents that intercept unicast DHCP messages to stuff
4871 agent options into them.
4873 - Fix a small memory leak in the relay agent option support code.
4875 - Fix a core dump that would occur if a packet was sent with no
4878 Changes since 3.0 Beta 2 Patchlevel 14
4880 - Finish fixing a long-standing bug in the agent options code. This
4881 was causing core dumps and failing to operate correctly - in
4882 particular, agent option stashing wasn't working. Agent option
4883 stashing should now be working, meaning that agent options can be
4884 used in class statements to control address allocation.
4886 - Fix up documentation.
4888 - Fix a couple of small memory leaks that would have added up
4889 significantly in a high-demand situation.
4891 - Add a log-facility configuration parameter.
4893 - Fix a compile error on some older operating systems.
4895 - Add the ability in the client to execute certain statements before
4896 transmitting packets to the server. Handy for debugging; not much
4897 practical use otherwise.
4899 - Don't send faked-out giaddr when renewing or bound - again, useful
4902 Changes since 3.0 Beta 2 Patchlevel 13
4904 - Fixed a problem where the fqdn decoder would sometimes try to store
4905 an option with an (unsigned) negative length, resulting in a core
4906 dump on some systems.
4908 - Work around the Win98 DHCP client, which NUL-terminates the FQDN
4911 - Work around Win98 and Win2k clients that will claim they want to do
4912 the update even when they don't have any way to do it.
4914 - Fix some log messages that can be printed when failover is operating
4915 that were not printing enough information.
4917 - It was possible for a DHCPDISCOVER to get an allocation even when
4918 the state machine said the server shouldn't be responding.
4920 - Don't load balance DHCPREQUESTs from clients in RENEWING and
4921 REBINDING, since in RENEWING, if we heard it, it's for us, and in
4922 REBINDING, the client wouldn't have got to REBINDING if its primary
4925 - When we get a bogus state lease binding state transition, don't do
4929 Changes since 3.0 Beta 2 Patchlevel 12
4931 - Fixed a couple of silly compile errors.
4933 Changes since 3.0 Beta 2 Patchlevel 11
4935 - Albert Herranz tracked down and fixed a subtle bug in the base64
4936 decoder that would prevent any key with an 'x' in its base64
4937 representation from working correctly.
4939 - Thanks to Chris Cheney and Michael Sanders, we have a fix for the
4940 hang that they both spotted in the DHCP server - when
4941 one-lease-per-client was set, the code to release the "other" lease
4944 - Fix a problem with alignment of the input buffer in bpf in cases
4945 where two packets arrive in the same bpf read.
4947 - Fix a problem where the relay agent would crash if you specified an
4948 interface name on the command line.
4950 - Add the ability to conditionalize client behaviour based on the
4953 - Add support for the FQDN option, and added support for a new way of
4954 doing ddns updates (ddns update style interim) that allows more than
4955 one DHCP server to update the DNS for the same network(s). This
4956 was implemented by Damien Neil with some additional functionality
4959 - Damien added a "log" statement, so that the configuration file can
4960 be made to log debugging information and other information.
4962 - Fixed a bug that caused option buffers not to be terminated with an
4965 - Fixed a long-standing bug in the support for option spaces where the
4966 options are stored as an ordered list rather than in a hash table,
4967 which could theoretically result in memory pool corruption.
4969 - Prevent hardware declarations with no actual hardware address from
4970 being written as something unparsable, and behave correctly in the
4971 face of a null hardware address on input.
4973 - Allow key names to be FQDNs, and qualify the algorithm name if it is
4974 specified unqualified.
4976 - Modify the DDNS update code so that it never prints the "resolver
4977 failed" message, but instead says *why* the resolver failed.
4979 - Officially support the subnet selection option, which now has an
4982 - Fix a build bug on MacOS X.
4984 - Allow administrator to disable ping checking.
4986 - Clean up dhcpd.conf documentation and add more information about how
4989 Changes since 3.0 Beta 2 Patchlevel 10
4991 - Fix a bug introduced during debugging (!) and accidentally committed
4994 Changes since 3.0 Beta 2 Patchlevel 9
4996 - Fix DHCP client handling of vendor encapsulated options.
4998 - Fix a bug in the handling of relay agent information options introduced
5001 - Stash agent options on client leases by default, and use the stashed
5002 options at renewal time.
5004 - Add the ability to test the client's binding state in the client
5005 configuration language.
5007 - Fix a core dump in the DNS update code.
5009 - Fix some expression evaluation bugs that were causing updates to be
5010 done when no client hostname was received.
5012 - Fix expression evaluation debugging printfs.
5014 - Teach pretty_print_option to print options in option spaces other than
5015 the DHCP option space.
5017 - Add a warning message if the RHS of a not is not boolean.
5019 - Never select for more than a day, because some implementations of
5020 select will just fail if the timeout is too long (!).
5022 - Fix a case where a DHCPDISCOVER from an unknown network would be
5025 - Fix a bug where if a client requested an IP address for which a different
5026 client had the lease, the DHCP server would reallocate it anyway.
5028 - Fix the DNS update code so that if the client changes its name, the DNS
5029 will be correctly updated.
5031 Changes since 3.0 Beta 2 Patchlevel 8
5033 - Oops, there was another subtle math error in the header-length
5036 Changes since 3.0 Beta 2 Patchlevel 7
5038 - Oops, forgot to byte-swap udp header length before bounds-checking it.
5040 Changes since 3.0 Beta 2 Patchlevel 6
5042 - Fix a possible DoS attack where a client could cause the checksummer
5043 to dump core. This was a read, not a write, so it shouldn't be
5044 possible to exploit it any further than that.
5046 - Implement client- and server-side support for using the Client FQDN
5049 - Support for other option spaces in the client has been added. This
5050 means that it is now possible to define a vendor option space on the
5051 client, request options in that space from the server (which must
5052 define the same option space), and then use those options in the
5053 client. This also allows NWIP and Client FQDN options to be used
5056 - Add object initializer support. This means that objects can now be
5057 initialized to something other than all-zeros when allocated, which
5058 makes, e.g., the interface object support code a little more robust.
5060 - Fix an off-by-one bug in the host stuffer. This was causing host
5061 deletes not the work, and may also have been causing OMAPI
5062 connections to get dropped. Thanks to James Brister for tracking
5065 - Fixed a core dump in the interface discovery code that is triggered
5066 when there is no subnet declaration for an interface, but the server
5067 decides to continue running. Thanks to Shane Kerr for tracking
5068 down and fixing this problem.
5070 Changes since 3.0 Beta 2 Patchlevel 5
5072 - Fix a bug in the recent enhancement to the interface discovery code
5073 to support arbitrary-length interface lists.
5075 - Support NUL-terminated DHCP options when initializing client-script
5078 - Fix suffix operator.
5080 - Fix NetWare/IP option parsing.
5082 - Better error/status checking in dhcpctl initialization and omapi
5085 - Fix a potential memory smash in dhcpctl code.
5087 - Fix SunOS4 and (maybe) Ultrix builds.
5089 - Fix a bug where a certain sort of incoming packet could cause a core
5090 dump on Solaris (and probably elsewhere).
5092 - Add some more safety checks in error logging code.
5094 - Add support for ISC_R_INCOMPLETE in OMAPI protocol connection code.
5096 - Fix relay agent so that if an interface is specified on the command
5097 line, the relay agent does not dump core.
5099 - Fix class matching so that match if can be combined with match or
5102 - Do not allow spurious leases in the lease database to introduce
5103 potentially bogus leases into the in-memory database.
5105 - Fix a byte-order problem in the client hardware address type code
5108 - Be slightly less picky about what sort of hardware addresses OMAPI
5109 can install in host declarations.
5111 Changes since 3.0 Beta 2 Patchlevel 4
5113 - Incorporated Peter Marschall's proposed change to array/record
5114 parsing, which allows things like the slp-agent option to be encoded
5115 correctly. Thanks very much to Peter for taking the initiative to
5116 do this, and for doing such a careful job of it (e.g., updating the
5119 - Added an encoding for the slp-agent option. :')
5121 - Fixed SunOS 4 build. Thanks to Robert Elz for responding to my
5122 request for help on this with patches!
5124 - Incorporated a change that should fix a problem reported by Philippe
5125 Jumelle where when the network connection between two servers is
5126 lost, they never reconnect.
5128 - Fix client script files other than that for NetBSD to actually use
5129 make_resolv_conf as documented in the manual page.
5131 - Fix a bug in the packet handling code that could result in a core
5134 - Fix a bug in the bootp code where responses on the local net would
5135 be sent to the wrong MAC address. Thanks to Jerry Schave for
5138 Changes since 3.0 Beta 2 Patchlevel 3
5140 - In the DHCP client, execute client statements prior to using the values
5141 of options, so that the client configuration can overridden, e.g., the
5144 - Fix a reference counting error that would result in very reproducible
5145 failures in updates, as well as occasional core dumps, if a zone was
5146 declared without a key.
5148 - Fix some Linux 2.0 compilation problems.
5150 - Fix a bug in scope evaluation during execution of "on" statements that
5151 caused values not to be recorded on leases.
5153 - If the dhcp-max-message-size option is specified in scope, and the
5154 client didn't send this option, use the one specified in scope to
5155 determine the maximum size of the response.
5157 Changes since 3.0 Beta 2 Patchlevel 2
5159 - Fix a case where spawning subclasses were being allocated
5160 incorrectly, resulting in a core dump.
5162 - Fix a case where the DHCP server might inappropriately NAK a
5165 - Fix a place dhcprequest() where static leases could leak.
5167 - Include memory.h in omapip_p.h so that we don't get warnings about
5170 Changes since 3.0 Beta 2 Patchlevel 1
5172 - Notice when SIOCFIGCONF returns more data than fit in the buffer -
5173 allocate a larger buffer, and retry. Thanks to Greg Fausak for
5176 - In the server, if no interfaces were configured, report an error and
5179 - Don't ever record a state of 'startup'.
5181 - Don't try to evaluate the local failover binding address if none was
5182 specified. Thanks to Joseph Breu for finding this.