1 Internet Systems Consortium DHCP Distribution
9 The major "theme" for ISC DHCP 4.4.x ....
11 <TBD PRIOR TO RELEASE OF 4.4.0>
13 For information on how to install, configure and run this software, as
14 well as how to find documentation and report bugs, please consult the
17 ISC DHCP uses standard GNU configure for installation. Please review the
18 output of "./configure --help" to see what options are available.
20 The system has only been tested on Linux, FreeBSD, and Solaris, and may not
21 work on other platforms. Please report any problems and suggested fixes to
24 ISC DHCP is open source software maintained by Internet Systems
25 Consortium. This product includes cryptographic software written
26 by Eric Young (eay@cryptsoft.com).
28 Please note that as of version 4.4.0, ISC DHCP is licensed under the Mozilla
29 Public License, MPL 2.0. Please see https://www.mozilla.org/en-US/MPL/2.0/
30 to read the MPL 2.0 license terms.
32 Older versions already published under the ISC license will remain under the
33 ISC license. Those unsure whether or not the license change affects their use
34 of ISC DHCP, or who wish to discuss how to comply with the license may contact
35 ISC at info@isc.org or use https://www.isc.org/mission/contact/.
37 We welcome comments from DHCP users, about this or anything else we do. Email
38 Vicky Risk, Product Manager at vicky@isc.org or discuss on
39 dhcp-users@lists.isc.org.
41 Changes since 4.3.0 (new features)
43 - Insert the raw data from a fully encapsualted option into the option cache.
44 This allows "exists" to check for the option if any sub options exist. It
45 also adds the raw data to the environment variables supplied to the client
49 - Pass configure arguments which begin with an upper case letter, e.g.
50 CFLAGS, to the embedded bind configure, so it is no longer required
51 to use environment variables to get the same effect.
54 - Added --enable-kqueue, --enable-epoll, --enable-devpoll and a more
55 general --with-bind-extra-config to pass extra options to the
56 embedded bind configure. Note we had mixed experiences with this
57 so it is at the user risk, i.e., they are NOT SUPPORTED yet.
60 - Changed the way the embedded bind Makefile is updated by configure.
61 The only user visible side effect is that --with-libbind now requires
62 either "no" or an (absolute) path, i.e. "yes" is no longer valid.
65 - Added the support for git repositories in the util/bind.sh script.
66 When you build ISC DHCP from a git repo, i.e., without a "bind"
67 directory populated as in the release distribution file, you may now
68 create the bind directory, change to it and clone the private
69 (repo.isc.org/proj/git/prod/bind9.git) or the public
70 (https://source.isc.org/git/bind9.git) git repository into
71 bind/bind9 and then invoke the util/bind.sh script as usual.
72 Note this option is incompatible with "make dist" (and make "distcheck")
73 because no bind/bind.tar.gz nor bind/version.tmp files are available.
76 - Use the embedded bind libraries where they are built (vs where they
80 - Use last version (9.11) of plain embedded bind libraries in place of
81 older (9.9) version of export bind libraries.
84 - Using "make distcheck" now works with external bind libraries (aka
85 configure --with-libbind).
88 - The server now allows the client identifier (option 61) to own leases
89 in more than one subnet concurrently. Prior to this the server would
90 incorrectly release an existing lease in one subnet prior to assigning
91 a lease in another subnet. Note that the prior behavior can be still
92 be achieved by enabling one-lease-per-client. Thanks to both David Zych at
93 the University of Illinois and Norm Proffitt of Infoblox for reporting
94 the issue; and Norm for suggesting a solution.
97 - Added --enable-bind-install to install embedded bind includes and
98 libraries. Default is to not install them (it was the previous
99 behavior). If you'd like to change the includedir and/or libdir
100 installation directories to something different than for ISC DHCP
101 you must pass them using the --with-bind-extra-config configuration
105 - Added support of dynamic shared libraries with libtool. A new
106 --enable-libtool configuration parameter is available but
107 should not be used directly: *please* read the build configuration
108 section in the README file for the recommended procedure.
111 - IPv6 operation now supports an EUI-64 based address allocation which will
112 calculate addresses for clients with EUI-64 DUIDs based on those DUIDs when
113 enabled by setting use-eui-64 true. The parameter may defined down to the
114 pool scope. Note this feature must be compiled in by defining EUI_64 in
115 includes/site.h. This flag is undefined by default.
118 - Added new compile time option --with-srv-conf-file which specifies a
119 default location of the server configuration file.
122 - Added --dad-wait-time parameter to dhclient. It specifies the maximum time,
123 in seconds, that the client process should wait for the duplicate address
124 detection to complete before initiating DHCP requests. This value is
125 propagated to the dhclient script and the script is responsible for waiting
126 the specified amount of time or until DAD has completed. If the script does
127 not support it, specifying this parameter has no effect. The default value
128 is 0 which specifies that the script should not wait for DAD. With this
129 change the following scripts have been modified to support the new parameter:
130 freebsd, linux, macos, netbsd, openbsd.
133 - Modified DDNS support initialization such that DNS related ports will only be
134 opened by the server (dhcpd) at startup if ddns-update-style is not "none";
135 by dhclient only if and when the it first attempts an update; and never by
136 dhcrelay. Prior to this all three always did the initialization at startup
137 which causes them to always open on and listen for traffic on two random
138 ports. Thanks to Rodney Beede for reporting the issue.
142 - Added error logging to two memory allocation failure checks. Thanks to Bill
143 Parker (wp02855 at gmail dot com) for reporting the issue.
146 - Corrected a dhclient -6 issue that caused the client to crash with an
147 "Impossible condition" error after de-preferencing its only IA binding.
148 The crash occurred when server configuration changes rendered the existing
149 binding out-of-range and no other leases were available to offer. Thanks
150 to Pierre Clerissi for bringing this issue to our attention.
153 - By defining CALL_SCRIPT_ON_ONETRY_FAIL in includes/site.h, dhclient will
154 now call the script with reason set to FAIL when run with -1 (one try) and
155 there are no server responses. This applies to IPv4 mode only. Thanks for a
156 patch by Martin Pitt which got to us via Andrew Pollock.
159 - Linux script updated. The script is now based on Debian version. It uses
160 ip tool from iproute2 package and ifconfig is no longer used. This also
161 addresses an issue of calling arping with inappropriate parameter.
165 - The directory minires has been removed from the source tree. It has
166 long been obsolete for branches other than v4_1_esv. Additionally,
167 includes/minires.h was renamed includes/ns_name.h.
170 - The directory includes/isc-dhcp and it's only occupant, dst.h, have
171 been removed from the source tree. They are obsolete for branches
175 - Replaced ISC licensing with Mozilla Public License, MPL 2.0 licensing
176 throughout. Please see https://www.mozilla.org/en-US/MPL/2.0/ to read
177 the MPL 2.0 license terms.
180 Changes since 4.3.0 (bug fixes)
182 - Tidy up several small tickets.
183 Correct parsing of DUID from config file, previously the LL type
184 was put in the wrong place in the DUID string.
187 Add code to parse "do-forward-updates" as well as "do-forward-update"
188 Thanks to Jiri Popelka at Red Hat.
191 Remove log_priority as it isn't currently used.
194 Increase the size of the buffer used for reading interface information.
197 - Remove an extra set of the msg_controllen variable.
200 - Add a more understandable error message if a configuration attempts
201 to add multiple keys for a single zone. Thanks to a patch from Jiri
205 - Fix some minor issues in the dst code.
208 - Properly #ifdef functions so that the code can compile without NSUPDATE.
211 - Update the partner's stos (start time of state, basically when we last
212 heard from this partner) field when updating the state in failover.
215 - Modify the overload processing to allow space for the remote agent ID.
217 Handle the ordering of the SUBNET_MASK option even if it is the last
221 - Remove the code that allows a server to follow RFC3315 instead of
222 the subsequent errata from August 2010 when determining which IAs
223 to include if no addresses will be assigned.
226 - Remove unused RCSID tags.
229 - Correct the v6 client timing code. When doing the timing backoff
230 for MRT limit it to MRD.
231 Thanks to Jiri Popelka at Red Hat for the bug report and fix.
234 - Add a log entry when killing a client and remove the PID files
235 when a server, relay or client are killed.
239 - Some minor cleanups in the client code.
240 In addition to checking for dhcpc check for bootpc in the services list.
242 Correct the client code to only try to get a lease once when the
243 given the "-1" argument.
244 Thanks to Jiri Popelka at Red Hat for the bug report and fix.
246 When asked for the version don't send the output to syslog.
248 Add the next server information to the environment variables for
249 use by the client script. In order to avoid changing the client
250 lease file the next server information isn't written to it.
251 Thanks to Tomas Hozza at Red Hat for the suggestion and a prototype fix.
254 - Several updates to the dhcp server code.
255 When not in quiet mode print out the files being used.
257 As accessing some pid files may require privileges move the dropping
258 of permission bits due to the paranoia patch to be after the pid code.
259 Thanks to Jiri Popelka at Red Hat for the bug report and fix.
261 When processing a "--version" request don't output the version information
264 - Add the "enable-log-pid" build option to the configure script. When enabled
265 this causes the client, server and relay programs to include the PID
266 number in syslog messages.
267 Thanks to Marius Tomaschewski for the suggestion and proto-patch.
270 - Add a #define to specify the prefix length used when a client attempts
271 to configure an address. This can be modified by editing includes/site.h.
272 By default it is set to 64. While 128 might be a better choice it would
273 also be a change for currently running systems, so we have left it at 64.
276 - Add a run time option to the client "-df" to allow the administrator to
277 point to a second lease file the client can search for a DUID. This can
278 be used to allow a v4 and a v6 instance of the client to share a DUID.
279 The second file will only be searched if there isn't a DUID in the main
280 lease file and the DUID will be written out to the main lease file.
283 - Have the client fsync the lease file to avoid lease corruption if the
284 client hibernates or otherwise shuts down.
287 - Add a check for L2VLAN in bpf.c to help support VLAN interfaces
288 Thanks to Steinar Haug for the suggestion.
291 - Modify the handling of the resolv.conf file to allow the DHCP
292 process to start up even if the resolv.conf file has problems.
295 - Add threshold logging functionality. Two new options,
296 log-threshold-low and log-threshold-high, indicate to the
297 server if and when it should log an error message as addresses
301 - Add code to properly dereference a pointer in the dhclient code
302 on an error condition.
305 - Add code to help clean up soft leases.
308 - Disable the gentle shutdown functionality until we can determine
309 the best way to present it to remove or reduce the side effects.
312 - Modify the message displayed when a process hits a fatal error.
313 The new message is much shorter and simply points to the README
314 and our website for directions on bug submissions.
317 - Handle an absent resolv.conf file better.
320 - Tidy up receive packet processing.
321 Thanks to Brad Plank of GTA for reporting the issue and suggesting
325 - Corrected parser's right brace matching when a statement contains an error.
328 - TSIG-authenticated dynamic DNS updates now support the use of these
329 additional algorithms: hmac-sha1, hmac-sha224, hmac-sha256, hmac-sha384,
333 - Added check for invalid failover message type. Thanks to Tobias Stoeckmann
334 working with the OpenBSD project who spotted the issue and provided the
338 - Corrected rate limiting checks for bad packet logging. Thanks to Tobias
339 Stoeckmann working with the OpenBSD project who spotted the issue and
343 - Log statements depicting what files will be used by the server now occur
344 after the configuration file has been processed.
347 - Addressed Coverity issues reported as of 07-31-2014:
348 [ISC-Bugs #36712] Corrects Coverity reported "high" impact issues.
349 [ISC-Bugs #36933] Corrects Coverity reported "medium" impact issues
350 [ISC-Bugs #37708] Fixes compilation error in dst_api.c seen in older
351 compilers that was introduced by #36712
353 - Server now supports a failover split value of 256.
356 - Remove unneeded error #defines. These defines were included in case
357 external programs required the older versions of the macro. They
358 have been #ifdeffed for now and will be removed at a future date.
359 See site.h for the #define to include them again, but you should
360 switch to using the DHCP_R_* versions instead of the ISC_R_* versions.
361 Also ISC_R_MULTIPLE has been removed as it is also defined in bind.
364 - Added checks in range6 and prefix6 statement parsing to ensure addresses
365 are within the declared subnet. Thanks to Jiri Popelka at Red Hat for the
366 bug report and patch.
373 - Addressed checksum issues:
374 Added checksum readiness check to Linux packet filtering which eliminates
375 invalid packet drops due to checksum errors when checksum offloading is
376 in use. Based on dhcp-4.2.2-xen-checksum.patch made to the Fedora project.
383 Inbound packets with UDP checksums of 0xffff now validate correctly rather
388 - Added the echo-client-id configuration parameter to the server configuration.
389 The server now supports RFC 6842 compliant behavior by setting a new
390 configuration parameter, echo-client-id. When enabled, the server will
391 include the client identifier option (Option code 61) if received, in its
392 responses. The server identifier returned in NAKs (if enabled) will now
393 be the globally defined value (if one) if the server cannot attribute the
394 inbound request to a known subnet.
398 - Added support of the configuration parameter, use-host-decl-names, to
399 BOOTP request handling.
402 - Added logic to ignore the signal, SIGPIPE, which ensures write failures
403 will be delivered as errors rather than as SIGPIPE signals on all OSs.
404 Thanks to Marius Tomaschewski from SUSE who reported the issue and provided
405 the patch upon which the fix is based.
408 - In the failover code, handle the case of communications being interrupted
409 when the servers are dealing with POTENTIAL-CONFLICT. This patch allows
410 the primary to accept the secondary moving from POTENTIAL-CONFLICT to
411 RESOLUTION-INTERRUPTED as well as handling the bind update process better.
412 In addition the code to resend update or update all requests has been
413 modified to send requests more often.
417 - By default, the server will now choose the value to use in the forward DNS
418 name from the following in order of preference:
420 1. FQDN option if provided by the client
421 2. Host name option if provided by the client
422 3. Configured option host-name if defined
424 As before, this may be overridden by defining ddns-hostname to the desired
425 value (or expression). In addition, the server logic has been extended to
426 use the value of the host name declaration if use-host-decl-names is enabled
427 and no other value is available.
430 - DNS updates were being attempted when dhcp-cache-threshold enabled the use of
431 the existing lease and the forward DNS name had not changed. This has been
436 - Corrected an issue which caused dhclient to incorrectly form the result when
437 prepending or appending to the IPv4 domain-search option, received from the
438 server, when either of the values being combined contain compressed
442 - Added the server-id-check parameter to the server configuration.
443 This parameter allows run-time control over whether or not a server,
444 participating in failover, verifies the dhcp-server-identifier option in
445 DHCP REQUESTs against the server's id before processing the request.
446 Formerly, enabling this behavior was done at compilation time through
447 the use of the #define, SERVER_ID_CHECK, which has been removed from site.h
448 The functionality is now only available through the new runtime parameter.
451 - During startup, when the server encounters a lease whose binding state is
452 FTS_BACKUP but whose pool has no configured failover peer, it will reset the
453 lease's binding state to FTS_FREE. This allows the leases to be reclaimed
454 by the server after a pool's configuration has changed from failover to
455 standalone. Prior to this such leases would remain stuck in the backup state
456 making them unavailable for assignment. Note this conversion will occur
457 whether or not the server is compiled for failover.
460 - Fixed a small issue in the treatment of hosts in the inform processing
461 that could cause the response to an inform to include information from
462 the wrong scope. The two examples we've heard of are getting subnet
463 instead of group information associated with a host entry, or getting
464 global information instead of subnet if the host entry was built via
465 omapi. Thanks to Julien Soula at University of Lille for finding the
466 bug and supplying a patch.
469 - Avoid calling pool_timer() recursively from supersede_lease(). This could
470 result in leases changing state incorrectly or delaying the running of the
471 leae expiration code.
474 - Move the check for a PID file and process to be before we rewrite the
475 lease file. This avoids the possibility of starting a second instance
476 of a server which changes the current lease file confusing the first
477 instance. This check is only included if the admin hasn't disabled PID
482 - In the client code change the way preferred_life and max_life are printed
483 for environment variables to be unsigned rather than signed.
484 Thanks to Jiri Popelka at Red Hat for the bug report and patch.
487 - Modified Linux packet handling such that packets received via VLAN are now
488 seen only by the VLAN interface. Prior to this, such packets were seen by
489 both the VLAN interface and its parent (physical) interface, causing the
490 server to respond to both. Note this remains an issue for non-Linux OSs.
491 Thanks to Jiri Popelka at Red Hat for the patch.
497 - Log content has been changed to more directly suggest that admins should
498 check for multiple IPv6 clients attempting to use the same DUID when only
499 abandoned addresses are available. Debug level logging will now emit counts
500 of the total number of, in-use, and abandoned addresses in a shared subnet
501 when the server finds no addresses available for a given DUID. Lastly,
502 threshold logging is now automatically disabled for shared subnets whose
503 total number of possible addresses exceeds (2^64)-1.
507 - Added a global parameter, prefix-length-mode, which may be used to determine
508 how the server uses a non-zero value for prefix-length supplied by clients
509 when soliciting DHCPv6 prefixes. The server supports selection modes of:
510 ignore, prefer, exact, minimum and maximum which are described in detail in
511 the server man pages. The prior behavior of the server was to only offer a
512 prefix whose length exactly matched the prefix-length value requested. If
513 no such prefixes were available, the server returned a status of none
514 available. Note the default mode, "exact", provides this same behavior.
518 - Corrected inconsistencies in dhcrelay's setting the upper interface hop count
519 limit such that it now sets it to 32 when the upstream address is a multicast
520 address per RFC 3315 Section 20. Prior to this if the -u argument preceded
521 the -l argument on the command line or if the same interface was specified
522 for both; the logic to set the hop limit count for the upper interface was
523 skipped. This caused the hop count limit to be set to the default value
524 (typically 1) in the outbound upstream packets.
527 - Modify the linux and openwrt dhclient scripts to process information
528 from a stateless request. Thanks to Jiri Popelka at Red Hat for the
529 bug report and patch.
532 - Remove more unused RCSID tags. These weren't noticed in 4.3 as
533 the code isn't used anymore but we remove them here to keep the
534 code consistent across versions.
537 - The server now does a better check to see if it can allocate the memory
538 for large blocks of v4 leases and should provide a slightly better error
539 message. Note well: the server pre-allocates v4 addresses, if you use
540 a large range, such as a /8, the server will attempt to use a large
541 amount of memory and may not start if there either isn't enough memory
542 or the size exceeds what the code supports.
545 - The server will now reject unicast Request, Renew, Decline, and Release
546 messages from a client unless the server would have sent that client the
547 dhcp6.unicast option. This behavior is in compliance with paragraph 1 in
548 each of the sections 18.2,1, 18.2.3, 18.2.6, and 18.2.7 of RFC 3315. Prior
549 to this, the server would simply accept the messages. Now, in order for
550 the server to accept such a message, the server configuration must include
551 the dhcp6.unicast option either globally or within the shared network to
552 which the requested lease belongs. In other words, the server will map
553 the first IA_XX address found within the client message to a shared-network
554 and look for the presence of the unicast option there and then globally.
555 Thanks to Jiri Popelka at Red Hat for this issue and his patch which
559 - The ATF (Automated Testing Framework) tools used for optional unit tests
560 can now be built from its embedded sources in bind, solving the
561 atf-run / atf-report issue with recent (>= 0.20) versions of ATF.
562 The new configuration option is "./configure --with-atf=bind".
563 [ISC-Bugs #38754, #39300]
565 - Corrected a compilation error introduced by the fix for ISC-Bugs #22806.
566 On older linuxes that do not include the tpacket_auxdata structure don't
567 bother allocating the cmsgbuf as it isn't necessary and we don't have
568 a proper length for it.
571 - Remove the dst directory. This was replaced in 4.2.0 with the dst
572 code from the Bind libraries but we continued to include it for
573 backwards compatibility. As we have now released 4.3.x it seems
574 reasonable to remove it.
577 - Write out the DUID server id on startup in all cases, previously if it
578 was read in from server-duid option in the config or lease files for
579 DHCPv4 it would not be written to the new lease file.
582 - When parsing dates for leases convert dates past 2038 to "never".
583 This avoids problems with integer overflows in the date and time
584 handling code for people that decide to use very large lease times
585 or add a lease entry with a date far in the future.
588 - Leave the siaddr field clear when sending a NACK as per RFC 2131
592 - In the client don't send expired addresses to the script as part of
593 the binding process. Thanks to Sven Trenkel at Google for reporting
594 the issue and suggesting the patch.
597 - While parsing IPv6 addresses treat "add" as part of the address instead
601 - Add support for accessing the v4 lease queues (active, free etc) in a
602 binary fashion instead of needing to walk through a linear list to
603 insert, find or remove an entry from the queues. In addition add a
604 compile time option "--enable-binary-leases" to enable the new code
605 or to continue using the old code. The old code is the default.
606 Thanks to Fernando Soto from BlueCat Networks for the patch.
609 - Delayed-ack now works properly with Failover. Prior to this, bind updates
610 post startup were being queued but never delivered. Among other things, this
611 was causing leases to not transition from expired or released to free.
614 - Clean up parsing of v6 lease files a bit to avoid infinite loops if the
615 lease file is corrupt in certain ways.
618 - Corrected a crash in dhclient that occurs during lease renewal if the
619 client is performing its own DNS updates. Thanks to Jiri Popelka at Red Hat
623 - Corrected an issue in v6 lease file parsing. Prior to this, when encountering
624 a lease with an address for which no configured pool exists, the server was
625 declaring the lease file corrupt and incorrectly skipping over the subsequent
626 entry in the file. The server will now emit a log message indicating that
627 no pool was found for the address (or prefix) and correctly resume parsing
628 with the next entry in the lease file. Our thanks to Michal Žejdl for
632 - Be more liberal in finding a subnet group associated with a static
633 prefix. When we added the class matching code for v6 we also added
634 a requirement that the static prefix must be within a subnet the
635 client was in, in order to find the proper statements. We now
636 look for a subnet based on the prefix, failing that on the static
637 address for the client and failing that on the shared network
641 - Add a new action expression "parse_vendor_options", which can be used
642 to parse a vendor-encapsualted-option received by the server based on
643 the encoding specified by the vendor-option-space statement.
646 - Enhance the PARANOIA patch to include fchown() the lease file to
647 allow it to be manipulated after the server does a chown().
648 Thanks to Jiri Popelka at Red Hat for the patch.
651 - Relax the requirement that prefix pools must be within the subnet.
652 This was added in as part of #32453 in order to avoid configuration
653 mistakes but is being removed as prefixes aren't required to be
654 within the same subnet and many people configure them in that fashion.
657 - Fixed a server crash that could occur when the server attempts to remove
658 the billing class from the last lease billed to a dynamic class after said
659 class has been deleted. Our thanks to Lasse Pesonen for reporting the
663 - LDAP Patches - Numerous small patches submitted by contributors have
664 been applied to the contributed code which supplies LDAP support.
665 In addition, two larger submissions have also been included. The
666 first adds support for IPv6 configuration and the second provides
667 GSSAPI authentication. We would like to thank the following for their
668 contributions (alphabetically):
670 Bill Parker (wp02855 at gmail dot com)
671 Jiri Popelka at Red Hat
672 Marius Tomaschewski at SUSE
673 (william at adelaide.edu.au), The University of Adelaide
689 - Handle an out of memory condition in the client a bit better.
690 Thanks to Frédéric Perrin from Brocade for finding the issue
691 and suggesting a patch.
694 - Corrected a compilation error introduced by the fix for ISC-Bugs #37415.
695 The error occurs on Linux variants that do not support VLAN tag information
696 in packet auxiliary data. The configure script now only enables inclusion
697 of the VLAN tag-based logic if it is supported by the underlying OS.
700 - Specifying the option, --disable-debug, on the configure script command line
701 now disables debug features. Prior to this, specifying --disable-debug
702 incorrectly enabled debug features. Thanks to Gustavo Zacarias for reporting
706 - Unit test execution now uses a path augmented during configuration
707 processing of the --with-atf option to locate ATF runtime tools, atf-run
708 and atf-report. For most installations of ATF, this should alleviate the
709 need to manually include them in the PATH, as was formerly required.
710 If the configure script cannot locate the tools it will emit a warning,
711 informing the user that the tools must be in the PATH when running unit
713 Secondly, please note that "make check" will now exit with a failure status
714 code (non-zero) if one or more unit tests fail. This means that invoking
715 "make check" from an upper level directory will cause the make process to
716 STOP after the first test subdirectory with failed test(s). To force all
717 tests in all subdirectories to run, regardless of individual test outcome,
718 use the command "make -k check".
721 - Corrected a static analyzer warning in common/execute.c
724 - ISC DHCP now follows the common convention to use the base name a
725 program is invoked with (aka argv[0], vs. a builtin name) for
726 logs. This should help differentiate syslog entries for DHCPv4 and
727 DHCPv6 servers. You can define OLD_LOG_NAME in includes/site.h to
728 keep the previous behavior.
731 - The Linux packet filter code now correctly treats only the least significant
732 12 bits in an inbound packet's TCI value as the VLAN id (per IEEE 802.1Q).
733 Prior to this it was using the entire 16 bit value as the VLAN id and
734 incorrectly discarding packets. Thanks to Jiri Popelka at Red Hat for
735 reporting this issue and supplying its patch.
738 - Fixed several static analysis issues such as potential null
739 references, unchecked strdup returns. Thanks to Bill Parker (wp02855 at
740 gmail dot com) who identified these issues and supplied patches to
745 - Corrected compilation errors that prohibited building the server
746 and its ATF unit tests when failover is disabled.
749 - Added the lease address to the end of the debug level log message
750 emitted when an existing lease is renewed within the dhcp-cache-threshold.
751 Thanks to Nathan Neulinger at Missouri S&T for suggesting the change.
754 - Added dhcpv6 and delayed-ack to settings listed in the "Features:"
755 section of the configure script output. Additionally, all of the
756 features reported on will now always show either a "yes" or "no"
757 value. Prior to this features left to their default setting would
761 - Added a parameter, authoring-byte-order, to the lease file. This value
762 is automatically added to the top of new lease files by the server and
763 indicates the internal byte order (big endian or little endian) of the
764 server. This permits lease files generated on a server with one form of
765 byte order to be used on a server with the opposite form. Our thanks to
766 Timothe Litt for calling this to our attention and for the suggestions
770 - Fixed a small memory leak in the DHCPv6 version of the client code.
771 This is unlikely to cause significant issues in actual use.
774 - Corrected a few minor memory leaks in omapi's dereferencing of
775 host objects. Thanks to Jiri Popelka at Red Hat for reporting
776 the issue and supplying the patches.
780 - Cleaned up some of the Make infrastructure to make --with-libbind
781 work better. Though it still only works with an absolute path.
784 - Made the embedded bind libraries able to be cross compiled
785 (please refer to the bind9 documentation to learn how to cross
786 compile DHCP and its bind library dependency).
789 - Update the client code to better support getting IA_NAs and IA_PDs
790 in the same packet, see RFC7550 for some discussion.
793 ! Update the bounds checking when receiving a packet.
794 Thanks to Sebastian Poehn from Sophos for the bug report and a suggested
799 - When handling an incorrect command line for dhcpd, dhclient or dhcrelay
800 print out a specific error message about the first error in addition
801 to the usage string. This may be disabled by editing includes/site.h.
805 - The configure script will now exit with an error message if it cannot find
806 a GNU-style make tool (needed when building BIND libraries) or pkg-config
807 (needed to locate ATF used for building unit tests). Prior to this the
808 script would exit indicating success causing subsequent attempts to build
809 the software to fail.
812 - Properly terminate strings before passing them to regex and fix
813 a boundary error when creating certain new data strings.
814 Thanks to Andrey Jr. Melnikov for the bug report.
817 - Option expressions, such as prepend and append, are now supported when
818 running dhclient for IPv6. Prior to this such statements in the
819 client configuration file would be parsed but have no affect. Thanks
820 to Jiri Popelka at Red Hat for reporting the issue.
823 - A failover primary server will now accept a binding status update from the
824 secondary which transitions a lease from ACTIVE to ABANDONED. This accounts
825 for instances in which a client declines a lease and only the secondary
826 server receives it. Prior to this the primary server would reject such an
827 update as an "invalid state transition".
830 - Properly allocate memory for a bpf filter.
831 Thanks to Bill Parker (wp02855 at gmail dot com) who identified this issue.
834 - Updated contrib/dhcp-lease-list.pl to handle garbage in the oui file better
835 and to print out the hostnames a bit better.
836 Thanks to Antoine Beaupré from Debian for the suggested patch.
839 - The DHCPv6 server now handles long valid and preferred lease times better.
840 Values that would cause the internal end time of the lease to wrap are
841 modified to work as infinite.
844 - Updated support for cross compiling by allowing the library archiver
845 to be set at configure time via the environment variable 'AR'.
848 - The server will now match DHCPv6 relayed clients to host declarations
849 which include the "hardware" statement, if the relay connected to the
850 client supplies the client's hardware address via client-linklayer-address
851 option as per RFC 6939.
854 - Allow a filename to be specified instead of /dev/random during
855 configuration. This is passed to the BIND configuration to allow
856 for cross compilation.
859 - Add more option definitions.
862 - Correct outputting of long lines in the lease file when writing
863 a lease that includes long strings in an execute statement.
866 - The server will now correctly treat a lease as reserved when the client
867 requests an infinite lease time (i.e. OxFFFFFFFF) and "infinite-is-reserved"
868 is enabled. Prior to this the server would halt. In addition, corrections
869 were made to the server to allow a lease's flags field to be set via omapi.
870 Prior to this, the server, depending on the host architecture, would
871 incorrectly parse the new flags value from the omapi message.
874 - ISC DHCP can now be configured and built from a directory other than
875 the top level source directory. Note that "make distcheck" uses this
879 - Add support for RFC 3527 to dhcrelay. A new, dhcrelay command line argument,
880 "-U <interface>" enables the addition of a RFC 3527 compliant link selection
881 suboption to the agent option added for clients directly connected to the
886 - Add a new global DHCPv6 option, dhcpv6-set-tee-times, which when enabled
887 instructs the server to calculate T1 and T2 as recommended in RFC 3315,
891 - Corrected minor Coverity issues.
894 - Add support for RFC 7341 DHCPv4 over DHCPv6 with a new configuration
895 option "--enable-dhcpv4o6". Note this feature requires DHCPv6 support
896 and is not compatible with delayed-ack. Both client and server use 2
897 processes which communicate over UDP on a pair of sockets. The new
898 "-4o6 <port>" command line argument enables DHCPv4 over DHCPv6 support
899 and specifies the consecutive ports to use for inter-process communication.
900 Please look at doc/DHCPv4-over-DHCPv6 for more details.
903 - Correct interface name formation when using DLPI under Solaris 11. As of
904 Solaris 11, ethernet device files are located in "/dev/net". The configure
905 script has been modified to detect this situation and adjust the directory
906 used accordingly. Thanks to Jarkko Torppa for reporting this issue and
911 - Add a dereference call when handling an error condition while
915 - Add a new parameter, lease-id-format, to both dhcpd and dhclient. The
916 parameter controls the format in which certain values are written to lease
917 files. Formats supported are octal - quoted string containing octal
918 escapes, and hex - unquoted, colon separated hex digits. Thanks to
919 Jay Ford, University of Iowa for bringing the issue to our attention.
922 ! Add an option in site.h to limit the number of failover and control
923 connections the server will accept. By default this is 200.
927 - Fixed util/bindvar.sh error handling.
930 - Correct error message in relay to use remote id length instead
931 of circuit id length.
934 - Add support for including an encapsulated option in a response
935 from the DHCPv6 server. This allows the v6 FQDN option to be
936 returned in responses.
939 - Add logic to test directory Makefiles to avoid copying Attfile(s)
940 when building within the source tree. This eliminates a noisy but
941 otherwise harmless error message when running "make check".
944 - Leases are now scrubbed of certain prior use information when pool
945 re-balancing reassigns them from one FO peer to the other. This
946 corrects an issue where leases that were offered but not used
947 by the client retained the client hostname from the original
948 client. Thanks to Pavel Polacek, Jan Evangelista Purkyne University
949 for reporting the issue.
952 - In the LDAP code and schema add some missing '6' characters to use
953 the v6 instead of the v4 versions. Thanks to Denis Taranushin for
954 reporting this issue and supplying its patch.
957 - Correct how the pick-first-value expression is written to a lease
958 file. Previously it was written as a concat expression due to
959 a cut and paste error.
962 - Modify the DDNS code to clean up the PTR record even if there
963 are issues while cleaning up the A or AAAA records.
966 - Added global configuration parameter, abandon-lease-time, which determines
967 the amount of time a lease remains abandoned. The default is 84600 seconds.
968 Additionaly, the server now conducts a ping check (if ping checks are
969 enabled) prior to offering an abandoned lease to client. Our thanks to
970 David Zych at University of Illinois for reporting the issue and working
971 with us to produce a viable solution.
974 - Correct handling of interface names during interface discovery. This
975 addresses an issue where interface names of 15 characters in length
976 could lead to crashes or interface recognition errors during startup
977 of dhcpd, dhclient, and dhcrelay.
980 - Updates to contrib/dhcp-lease-list.pl to make it more friendly.
981 The updates are: looking for the lease file in more places and skipping
982 the "processing complete" output when creating machine readable
983 output. Thanks to Cameron Paine (cbp at null dot net) for the
987 - When reusing a lease for dhcp-cache-threshold return the hostname
988 to the original lease. Also if the host pointer, UID or hardware address
989 change don't allow reuse of the lease.
990 Thanks to Michael Vincent for reporting this and helping us
991 verify the problem and fix.
994 - Change dmalloc to use a size_t as the length argument to bring it
995 in line with the call it will make to malloc().
998 - If the failover socket can't be bound, close it. Otherwise if the
999 user configures an incorrect address in the failover stanza the
1000 server will continue to open new sockets every 90 seconds until
1004 - Add DHCPv4-mode, dhcrelay command line options, "-iu" and "-id", that
1005 allow interfaces to be upstream or downstream respectively. Upstream
1006 interfaces will accept and forward only BOOTP replies, while downstream
1007 interfaces will accept and forward only BOOTP requests.
1010 - Clean up some memory references in the vendor-class construct.
1013 - Removed an extraneous expression in omapi socket callback function. Prior
1014 to this change, the logic was techinically incorrect but other factors
1015 ensured the outcome itself was correct. This change was made primarily
1016 for code clarity. Thanks to Ganesh Pinjala for bringing the issue to our
1020 - Corrected a bug which could cause the server to sporadically crash while
1021 loading lease files with the lease-id-format is set to "hex". Our thanks
1022 to Jay Ford, University of Iowa for reporting the issue.
1025 - Eliminated a noisy, but otherwise harmless debug log statment that may
1026 appear during server startup when building with --enable-binary-leases
1027 and configuring multiple pools in a shared network. Thanks to Fernando
1028 Soto from BlueCat Networks for reporting the issue and supplying a patch.
1031 - The configure script for use with libtool now catches a failure to
1032 execute autoreconf. Prior to this, autoreconf failures would go undetected
1033 causing the legacy configure script to loop when run with --enable-libtool.
1036 - When replying to a DHCPINFORM, the server will now include options specified
1037 at the pool scope, provided the ciaddr field of the DHCPINFORM is populated.
1038 Prior to this the server only evaluated options down to the subnet scope.
1039 Thanks to Fernando Soto at BlueCat Networks for reporting the issue.
1043 - When memory allocation fails in a repeated way the process writes
1044 "Run out of memory." on the standard error and exists with status 1.
1047 - The new lmdb (Lightning Memory DataBase) bind9 configure option is
1048 now disabled by default to avoid the presence of this library to be
1049 detected which can lead to a link failure.
1052 - The linux interface discovery code has been modified to use getifaddrs()
1053 as is done for BSD and OS-X. Prior to this the code would only recognize
1054 the first address on an interface and thereby omit vlans.
1055 Thanks to Jiri Popelka at Redhat, Marius Tomaschewski at SUSE, and Wei
1056 Kong at Novell, who all submitted patches.
1063 - Fixed a bug in OMAPI that causes omshell to crash when a name-value
1064 pair with a zero length value is shipped in an object. Thanks to
1065 Fernando Soto at BlueCat Networks for reporting the issue and
1066 supplying the patch.
1069 - On 64-bit platforms, dhclient now generates the correct value for the
1070 script environment variable, "expiry", the lease expiry value exceeds
1071 0x7FFFFFFF. Prior to this such values would produce negative values
1072 for expiry in the script environment.
1075 - Common timer logic was modified to cap the maximum timeout values at
1076 0x7FFFFFFF - 1. Values larger than that were causing fatal timer out of
1077 range errors on 64-bit platforms. Thanks to Jiri Popelka at Red Hat for
1078 reporting the issue.
1081 - DHCP6 FQDN option unpacking code now correctly handles values that contain
1082 spaces, special, or non-printable characters. Prior to this the buffer
1083 size needed was underestimated causing a conversion error message to
1084 be logged and DNS updates to be skipped. Thanks to Fernando Soto at
1085 BlueCat Networks for bringing the matter to our attention.
1088 - When running in -6 mode, dhclient now enforces the require option statement
1089 and will discard offered leases that do not contain all the required
1090 options specified in the client configuration. Prior to this the client
1091 would still consider such leases. This may be disabled at compile time
1092 (see ENFORCE_DHCPV6_CLIENT_REQUIRE in includes/site.h). Thanks to
1093 Mritunjaykumar Dubey at Nokia for reporting the issue.
1096 - Altered DHCPv4 lease time calculation to avoid roll over errors on 64-bit
1097 OS systems when using -1 or large values for default-lease-time. Rollover
1098 values will be replaced with 0x7FFFFFFF - 1. This alleviates unintentionally
1099 short expiration times being handed out when infinite lease times (-1) in
1100 conjunction with failover. Our thanks to Alessandro Gherardi for bringing
1101 the issue to our attention.
1104 - The server nows checks both the address and length of a prefix delegation
1105 when attempting to match it to a prefix pool. This ensures the server
1106 responds properly when pool configurations change such that once valid,
1107 "in-pool" delegations are now treated as being invalid. During lease
1108 file loading at startup, the server will discard any PD leases that
1109 are deemed "out-of-pool" either by address or mis-matched prefix length.
1110 Clients seeking to renew or rebind such leases will get a response of
1111 No Binding in the case of the former, and the prefix delegation with
1112 lifetimes set to zero in the case of the latter. Thanks to Mark Nejedlo
1113 at TDS Telecom for reporting this issue.
1116 - The server now detects failover peers that are not referenced in at least
1117 one pool when run with the command line option for test mode, -T. Prior to
1118 this the check was performed too far down stream to be detected in test mode.
1121 - Changed severity of the log message indicating UDP checksum errors in
1122 the received packets from 'info' to 'debug' to avoid logging excessive
1123 number of false positives when UDP checksum offloading is enabled.
1126 - Replaced ifconfig parameters "add" and "delete" with "alias" and "-alias"
1127 for IPv6 mode in the client scripts, netbsd and openbsd. This was
1128 preventing IPv6 addresses from being added or removed from interfaces.
1129 Thanks to Tim Dean for reporting this issue.
1132 - Corrected an issue where the server would return a client's previously
1133 released prefix lease even when the client provides a prefix length
1134 hint that does not match the prior lease. Now the server will only
1135 return the previous lease if it exactly matches the hint. If not
1136 it will attempt to allocate a new prefix based on the hint and the
1137 prefix-length-mode. Thanks to Tim DeNike - Lightspeed Communications
1138 for pointing out the error of our ways.
1141 Changes since 4.2.0 (new features)
1143 - If a client renews before 'dhcp-cache-threshold' percent of its lease
1144 has elapsed (default 25%), the server will reuse the allocated lease
1145 (provide a lease within the currently allocated lease-time) rather
1146 than extend or renew the lease. This absolves the server of needing
1147 to perform an fsync() operation on the lease database before reply,
1148 which improves performance. [ISC-Bugs #22228]
1149 Updated this patch to support asynchronous DDNS. If the server is
1150 attempting to do DDNS on a lease it should be updated and written to
1151 disk even if that wouldn't be necessary due to the thresholding.
1154 - The 'no available billing' log line now also logs the name of the last
1155 matching billing class tried before failing to provide a billing.
1158 - A problem with missing get_hw_addr function when --enable-use-sockets
1159 was used is now solved on GNU/Linux, BSD and GNU/Hurd systems. Note
1160 that use-sockets feature was not tested on those systems. Client and
1161 server code no longer use MAX_PATH constant that is not defined on
1162 GNU/Hurd systems. [ISC-Bugs #25979]
1164 - Add a perl script in the contrib directory, dhcp-lease-list.pl, which
1165 can parse v4 lease files and output the lease information in a more
1166 human friendly manner. This was written by Christian Hammers with
1167 some updates by vom and ISC. This is contributed code and is not
1168 supported by ISC; however it may be useful to some users.
1171 - Add support in v6 for on-commit, on-expire and on-release.
1174 - Add support for using classes with v6.
1177 - Update the DDNS code to current standards and allow for sharing
1178 of DDNS entries between v4 and v6 clients. The new code is used
1179 if the ddns-update-style is set to "standard", the older code is
1180 still available if ddns-update-style is set to "interim". The
1181 oldest DDNS code "ad-hoc" has been removed. Thanks to Thomas Pegeot
1182 who submitted a patch for this issue. This patch is based on
1183 that work with some modifications.
1186 - Add a configuration option to the server to suppress using fsync().
1187 Enabling this option will mean that fsync() is never called. This
1188 may provide better performance but there is also a risk that a lease
1189 will not be properly written to the disk after it has been issued
1190 to a client and before the server stops. Using this option is
1194 - Add some logging statements to indicate when the server is ready
1195 to serve. One statement is emitted after the server has finished
1196 reading its files and is about to enter the dispatch loop.
1197 This is "Server starting service.".
1198 The second is emitted when a server determines that both it and
1199 its failover peer are in the normal state.
1200 This is "failover peer <name>: Both servers normal."
1203 - Add support for accessing options from v6 relays. The v6relay
1204 statement allows the administrator to choose which relay to
1205 use when searching for an option, see the dhcp-options man page
1206 for a description. The host-identifier option has also been
1207 updated to support the use of relay options, see the dhcpd.conf
1208 man page for a description.
1211 - When doing DDNS if there isn't an appropriate zone statement attempt
1212 to find a reasonable nameserver via a DNS resolver. This restores
1213 some functionality that was lost in the transition to asynchronous
1214 DDNS. Due to the lack of security and increase in fragility of the
1215 system when using this feature we strongly recommend the use of
1216 appropriate zone statements rather than using this functionality.
1219 - Add support for specifying the address from which to send
1220 DDNS updates on the DHCP server. There are two new options
1221 "ddns-local-address4" and "ddns-local-address6" that each take
1222 one instance of their respective address types.
1225 - Add ignore-client-uids option in the server. This option causes
1226 the server to not record a client's uid in its lease. This
1227 violates the specification but may also be useful when a client
1228 can dual boot using different client ids but the same mac address.
1229 Thank you to Brian De Wolf at Cal Poly Pomona for the patch.
1233 - Extend the DHCPINFORM processing to honor the subnet selection option
1234 and take host declarations into account.
1235 Thanks to Christof Chen for testing and submitting the patch.
1238 - Extend the hardware expression to look into the lease structure
1239 for a hardware address if there is no packet. This allows the
1240 server to find the hardware address during on-expiry processing.
1243 - Add definitions for some options that have been specified by the IETF.
1247 Changes since 4.2.0 (bug fixes)
1249 - When using 'ignore client-updates;', the FQDN returned to the client
1250 is no longer truncated to one octet.
1252 - Cleaned up an unused hardware address variable in nak_lease().
1254 - Manpage entries for the ia-pd and ia-prefix options were updated to
1255 reflect support for prefix delegation.
1257 - Cleaned up some compiler warnings
1259 - An optimization described in the failover protocol draft is now included,
1260 which permits a DHCP server operating in communications-interrupted state
1261 to 'rewind' a lease to the state most recently transmitted to its peer,
1262 greatly increasing a server's endurance in communications-interrupted.
1263 This is supported using a new 'rewind state' record on the dhcpd.leases
1264 entry for each lease.
1266 - Fix the trace code which was broken by the changes to the DDNS code.
1268 - Update the fsync code to work with the changes to the DDNS code. It now
1269 uses a timer instead of noticing if there are no more packets to process.
1271 - When constructing the DNS name structure from a text string append
1272 the root to relative names. This satisfies a requirement in the DNS
1273 library that names be absolute instead of relative and prevents DHCP
1274 from crashing. [ISC-Bugs #21054]
1276 - "The LDAP Patch" that has been circulating for some time, written by
1277 Brian Masney and S.Kalyanasundraram and maintained for application to
1278 the DHCP-4 sources by David Cantrell has been included. Please be
1279 advised that these sources were contributed, and do not yet meet the
1280 high standards we place on production sources we include by default.
1281 As a result, the LDAP features are only included by using a compile-time
1282 option which defaults off, and if you enable it you do so under your
1283 own recognizance. We will be improving this software over time.
1286 - Prohibit including lease time information in a response to a DHCP INFORM.
1289 ! Accept a client id of length 0 while hashing. Previously the server would
1290 exit if it attempted to hash a zero length client id, providing attackers
1291 with a simple denial of service attack. [ISC-Bugs #21253]
1292 CERT: VU#541921 - CVE: CVE-2010-2156
1294 - A memory leak in ddns processing was closed. [ISC-Bugs #21377]
1296 - Modify the exception handling for initial context creation. Previously
1297 we would try and clean up before exiting. This could present problems
1298 when the cleanup required part of the context that wasn't available. It
1299 also didn't do much as we exited afterwards anyway. Now we simply log
1300 the error and exit. [ISC-Bugs #21093]
1302 - A bug was fixed that could cause the DHCPv6 server to advertise/assign a
1303 previously allocated (active) lease to a client that has changed subnets,
1304 despite being on different shared networks. Dynamic prefixes specifically
1305 allocated in shared networks also now are not offered if the client has
1306 moved. [ISC-Bugs #21152]
1308 - Add some debugging output for use with the DDNS code. [ISC-Bugs #20916]
1310 - Fix the trace code to handle timing events better and to truncate a file
1311 before using instead of overwriting it. [ISC-Bugs #20969]
1313 - Modify the determination of the default TTL to use for DDNS updates.
1314 The user may still configure the ttl via ddns-ttl. The default for
1315 both v4 and v6 is now 1/2 the (preferred) lease time with a limit. The
1316 previous defaults (1/2 lease time without a limit for v4 and a default
1317 value for v6) may be used by defining USE_OLD_DDNS_TTL in site.h
1320 - libisc/libdns is now brought up to version 9.7.1rc1. This corrects
1321 three reported flaws in ISC DHCP;
1323 o DHCP processes (dhcpd, dhclient) fail to start if one of either the
1324 IPv4 or IPv6 address families is not present. [ISC-Bugs #21122]
1326 o Assertion failure when attempting to cancel a previously running DDNS
1327 update. [ISC-Bugs #21133]
1329 o Compilation failure of libisc/libdns due to the use of a flexible
1330 array member. [ISC-Bugs #21316]
1332 - Add declaration for variable in debug code in alloc.c. [ISC-Bugs #21472]
1334 - Documentation cleanup covering multiple tickets
1335 [ISC-Bugs #20265] [ISC-Bugs #20259] minor cleanup
1336 [ISC-Bugs #20263] add text describing some default values
1337 [ISC-Bugs #20193] single quotes at the start of a line indicate a control
1338 line to nroff, escape them if we actually want a quote.
1339 [ISC-Bugs #18916] sync the pointer to web pages amongst the different docs
1341 - 'get-host-names true;' now also works even if 'use-host-decl-names true;'
1342 was also configured. The nature of this repair also fixes another
1343 error; the host-name supplied by a client is no longer overridden by a
1344 reverse lookup of the lease address. Thanks to a patch from Wilco Baan
1345 Hofman supplied to us by the Debian package maintenance team.
1346 [ISC-Bugs #21691] {Debian Bug#509445}
1348 - The .TH tag for the dhcp-options manpage was typo repaired
1349 thanks to a report from jidanni and the Debian package maintenance
1350 team. [ISC-Bugs #21676] {Debian Bug#563613}
1352 - More documentation changes - primarily to put the options in the dhclient
1353 and dhcpd man pages into the standard form. Thanks in part to a patch
1354 from David Cantrell at Red Hat.
1355 [ISC-Bugs #20264] and parts of [ISC-Bugs #17744] dhclient.8 changes
1357 - Add code to clear the pointer to an object in an OMAPI handle when the
1358 object is freed due to a dereference. [ISC-Bugs #21306]
1360 - Fixed a bug that leaks host record references onto lease structures,
1361 causing the server to apply configuration intended for one host to any
1362 other innocent clients that come along later. [ISC-Bugs #22018]
1365 [ISC-Bugs #19566] When trying to find the zone for a name for ddns allow
1366 the name to be at the apex of the zone.
1367 [ISC-Bugs #19617] Restrict length of interface name read from command line
1368 in dhcpd - based on a patch from David Cantrell at Red Hat.
1369 [ISC-Bugs #20039] Correct some error messages in dhcpd.c
1370 [ISC-Bugs #20070] Better range check on values when creating a DHCID.
1371 [ISC-Bugs #20198] Avoid writing past the end of the field when adding
1372 overly long file or server names to a packet and add a log message
1373 if the configuration supplied overly long names for these fields.
1374 Thanks to Martin Pala.
1375 [ISC-Bugs #21497] Add a little more randomness to rng seed in client
1376 thanks to a patch from Jeremiah Jinno.
1378 - Correct error handling in DLPI [ISC-Bugs #20378]
1380 - Remove __sun__ and __hpux__ typedefs in osdep.h as they are now being
1381 checked in configure. [ISC-Bugs #20443]
1383 - Modify how the cmsg header is allocated the v6 send and received routines
1384 to compile on more compilers. [ISC-Bugs #20524]
1386 - When parsing a domain name free the memory for the name after we are
1387 done with it. [ISC-Bugs #20824]
1389 - Add an elapsed time option to the release message and refactor the
1390 code to move most of the common code to a single routine.
1393 - Two identical log messages for commit_leases() have been disambiguated.
1396 - Parse date strings more properly - the code now handles semi-colons in
1397 date strings correctly. Thanks to a patch from Jiri Popelka at Red Hat.
1398 [ISC-Bugs #21501, #20598]
1400 - Fixes to lease input and output.
1401 [ISC-Bugs #20418] - Some systems don't support the "%s" argument to
1402 strftime, paste together the same string using mktime instead.
1403 [ISC-Bugs #19596] - When parsing iaid values accept printable
1405 [ISC-Bugs #21585] - Always print time values in omshell as hex
1406 instead of ascii if the values happen to be printable characters.
1408 - Minor changes for scripts, configure.ac and Makefiles
1409 [ISC-Bugs #19147] Use domain-search instead of domain-name in manual and
1410 example conf file. Thanks to a patch from David Cantrell
1412 [ISC-Bugs #19761] Restore address when doing a rebind in DHCPv6
1413 [ISC-Bugs #19945] Properly close the quote on some arguments.
1414 [ISC-Bugs #20952] Add 64 bit types to configure.ac
1415 [ISC-Bugs #21308] Add "PATH=" to CLIENT_PATH environment variable
1417 - Update the code to parse dhcpv6 lease files to accept a semi-colon at
1418 the end of the max-life and preferred-life clauses. In order to be
1419 backwards compatible with older lease files not finding a semi-colon
1420 is also accepted. [ISC-Bugs #22303].
1422 ! Handle a relay forward message with an unspecified address in the
1423 link address field. Previously such a message would cause the
1424 server to crash. Thanks to a report from John Gibbins. [ISC-Bugs #21992]
1425 CERT: VU#102047 CVE: CVE-2010-3611
1427 - ./configure on longer searches for -lcrypto to explicitly link against.
1428 This fixes a bug where 'dhclient' would have shared library dependencies
1429 on '/usr/lib'. [ISC-Bugs #21967]
1431 - Handle pipe failures more gracefully. Some OSes pass a SIGPIPE
1432 signal to a process and will kill the process if the signal isn't
1433 caught. This patch adds code to turn off the SIGPIPE signal via
1434 a setsockopt() call. The signal is already being ignored as part
1435 of the ISC library. [ISC-Bugs #22269]
1437 - Restore printing of values in omshell to the style pre 21585. For
1438 21585 we changed the print routines to always display time values
1439 as a hex list. This had a side effect of printing all data strings
1440 as a hex list. We shall investigate other ways of displaying time
1441 values more usefully. [ISC-Bugs #22626]
1443 ! Fix the handling of connection requests on the failover port.
1444 Previously a connection request from a source that wasn't
1445 listed as a failover peer would cause the server to become
1446 non-responsive. Thanks to a report from Brad Bendily, brad@bendily.com.
1448 CERT: VU#159528 CVE: CVE-2010-3616
1450 - Don't pass the ISC_R_INPROGRESS status to the omapi signal handlers.
1451 Passing it through to the handlers caused the omshell program to fail
1452 to connect to the server. [ISC-Bugs #21839]
1454 - Fix the parenthesis in the code to process configuration statements
1455 beginning with "auth". The previous arrangement caused
1456 "auto-partner-down" to be processed incorrectly. [ISC-Bugs #21854]
1458 - Limit the timeout period allowed in the dispatch code to 2^^32-1 seconds.
1459 Thanks to a report from Jiri Popelka at Red Hat.
1460 [ISC-Bugs #22033], [Red Hat Bug #628258]
1462 - When processing the format flags for a given option consume the
1463 flag indicating an optional value correctly. A symptom of this
1464 bug was an infinite loop when trying to parse the slp-service-scope
1465 option. Thanks to a patch from Marius Tomaschewski.
1468 - Disable the use of kqueue in the ISC library. This avoids a problem
1469 between the fork and socket code that caused the dhcpd process to
1470 use all available cpu if the program daemonized itself.
1473 ! When processing a request in the DHCPv6 server code that specifies
1474 an address that is tagged as abandoned (meaning we received a
1475 decline request for it previously) don't attempt to move it from
1476 the inactive to active pool as doing so can result in the server
1477 crashing on an assert failure. Also retag the lease as active
1478 and reset its timeout value.
1481 - Removed the restriction on using IPv6 addresses in IPv4 mode. This
1482 allows IPv4 options which contain IPv6 addresses to be specified. For
1483 example the 6rd option can be specified and used like this:
1486 option 6rd code 212 = { integer 8, integer 8,
1487 ip6-address, array of ip-address };
1488 option 6rd 16 10 2001:: 1.2.3.4, 5.6.7.8;
1490 - Handle some DDNS corner cases better. Maintain the DDNS transaction
1491 information when updating a lease and cancel any existing transactions
1492 when removing the ddns information.
1495 - Some fixes for LDAP
1496 [ISC-Bugs #21783] - Include lber library when building ldap
1497 [ISC-Bugs #22888] - Enable the ldap code when buidling common
1498 The above fixes are from Jiri Popelka at Red Hat.
1500 - Modify the dlpi code to accept getmsg() returning a positive value.
1503 ! In dhclient check the data for some string options for
1504 reasonableness before passing it along to the script that
1505 interfaces with the OS.
1509 - DHCPv6 server now responds properly if client asks for a prefix that
1510 is already assigned to a different client. [ISC-Bugs #23948]
1512 - Add the option "--no-pid" to the client, relay and server code,
1513 to disable writing a pid file. Add the option "-pf pidfile"
1514 to the relay to allow the user to supply the pidfile name at
1515 runtime. Add the "with-relay6-pid-file" option to configure
1516 to allow the user to supply the pidfile name for the relay
1517 in v6 mode at configure time.
1518 [ISC-Bugs #23351] [ISC-Bugs #17541]
1520 - 'dhclient' no longer waits a random interval after first starting up to
1521 begin in the INIT state. This conforms to RFC 2131, but elects not to
1522 implement a 'SHOULD' direction in section 4.1. The goal of this change
1523 is to start up faster. [ISC-Bugs #19660]
1525 - Added 'initial-delay' parameter that specifies maximum amount of time
1526 before client goes to the INIT state. The default value is 0. In previous
1527 versions of the code client could wait up to 5 seconds. The old behavior
1528 may be restored by using 'initial-delay 5;' in the client config file.
1531 - ICMP ping-check should now sit closer to precisely the number of seconds
1532 configured (or default 1), due to making use of the new microsecond
1533 scale timer internally to dhcpd. This corrects a bug where the server
1534 may immediately timeout an ICMP ping-check if it was made late in the
1535 current second. [ISC-Bugs #19660]
1537 - The DHCP client will schedule renewal and rebinding events in
1538 microseconds if the DHCP server provided a lease-time that would result
1539 in sub-1-second timers. This corrects a bug where a 2-second or lower
1540 lease-time would cause the DHCP client to enter an infinite loop by
1541 scheduling renewal at zero seconds. [ISC-Bugs #19660]
1543 - Client lease records are recorded at most once every 15 seconds. This
1544 keeps the client from filling the lease database disk quickly on very small
1545 lease times. [ISC-Bugs #19660]
1547 - To defend against RFC 2131 non-compliant DHCP servers which fail to
1548 advertise a lease-time (either mangled, or zero in value) the DHCP
1549 client now adds the server to the reject list ACL and returns to INIT
1550 state to hopefully find an RFC 2131 compliant server (or retry in INIT
1551 forever). [ISC-Bugs #19660]
1553 - Parameters configured to evaluate from user defined function calls can
1554 now be correctly written to dhcpd.leases (as on 'on events' or dynamic
1555 host records inserted via OMAPI). [ISC-Bugs #22266]
1557 - If a 'next-server' parameter is configured in a dynamic host record via
1558 OMAPI as a domain name, the syntax written to disk is now correctly parsed
1559 upon restart. [ISC-Bugs #22266]
1561 - The DHCP server now responds to DHCPLEASEQUERY messages from agents using
1562 IP addresses not covered by a subnet in configuration. Whether or not to
1563 respond to such an agent is still governed by the 'allow leasequery;'
1564 configuration parameter, in the case of an agent not covered by a configured
1565 subnet the root configuration area is examined. Server now also returns
1566 vendor-class-id option, if client sent it. [ISC-Bugs #21094]
1568 - Documentation fixes
1569 [ISC-Bugs #17959] add text to AIX section describing how to have it send
1570 responses to the all-ones address.
1571 [ISC-Bugs #19615] update the includes in dhcpctl/dhcpctl.3 to be more correct
1572 [ISC-Bugs #20676] update dhcpd.conf.5 to include the RFC numbers for DDNS
1574 - Relay no longer crashes, when DHCP packet is received over interface without
1575 any IPv4 address assigned. Also extended logging message about discarding
1576 packets with invalid hlen with information about relevant interface name.
1579 - Relay now properly logs that packet was received over interface without
1580 global IPv6 address [ISC-Bugs #24070]
1582 - Linux Packet Filter interface improvement. sockaddr_pkt structure is used,
1583 rather than sockaddr. Packet ethertype is now forced to ETH_P_IP.
1586 - Minor code cleanups - but note port change for #23196
1587 [ISC-Bugs #23470] - Modify when an ignore return macro is defined to
1588 handle unsed error return warnings for more versions of gcc.
1589 [ISC-Bugs #23196] - Modify the reply handling in the server code to
1590 send to a specified port rather than to the source port for the incoming
1591 message. Sending to the source port was test code that should have
1592 been removed. The previous functionality may be restored by defining
1593 REPLY_TO_SOURCE_PORT in the includes/site.h file. We suggest you don't
1594 enable this except for testing purposes.
1595 [ISC-Bugs #22695] - Close a file descriptor in an error path.
1596 [ISC-Bugs #19368] - Tidy up variable types in validate_port.
1598 - Code cleanup: remove obsolete PROTO, KandR, INLINE and ANSI_DECL macros
1601 - Compilation problem with gcc4.5 and omshell.c resolved. [ISC-Bugs #23831]
1603 - Client Script fixes
1604 [ISC-Bugs #23045] Typos in client/scripts/openbsd
1605 [ISC-Bugs #23565] In the client scripts add a zone id (interface id) if
1606 the domain search address is link local.
1607 [ISC-Bugs #1277] In some of the client scripts add code to handle the
1608 case of the default router information being changed without the address
1611 - Documentation cleanup
1612 [ISC-Bugs #23326] Updated References document, several man page updates
1614 - Server no longer complains about NULL pointer when configured
1615 server-identifier expression fails to evaluate. [ISC-Bugs #24547]
1617 - Convert ISC_R_INPROGRESS status to ISC_R_SUCCESS when called from other
1618 than the dispatch handler. This fixes an issue where omshell, when
1619 run from the same platform as the server, would appear to fail to
1620 connect. This is a companion to #21839. [ISC-Bugs #23592]
1622 - Enlarge the buffer size used by the Omshell code and some of the
1623 print routines to allow for greater than 60 characters or, when
1624 printing as hex strings, 20 characters. [ISC-Bugs #22743]
1626 - In Solaris 11 switch to using sockets instead of DLPI, thanks
1627 to a patch form Oracle. [ISC-Bugs #24634].
1629 - Strict checks for content of domain-name DHCPv4 option can now be
1630 configured during compilation time. Even though RFC2132 does not allow
1631 to store more than one domain in domain-name option, such behavior is
1632 now enabled by default, but this may change some time in the future.
1633 See ACCEPT_LIST_IN_DOMAIN_NAME define in includes/site.h.
1636 - DNS Update fix. A misconfigured server could crash during DNS update
1637 processing if the configuration included overlapping pools or
1638 multiple fixed-address entries for a single address. This issue
1639 affected both IPv4 and IPv6. The fix allows a server to detect such
1640 conditions, provides the user with extra information and recommended
1641 steps to fix the problem. If the user enables the appropriate option
1642 in site.h then server will be terminated
1645 ! Two packets were found that cause a server to halt. The code
1646 has been updated to properly process or reject the packets as
1647 appropriate. Thanks to David Zych at University of Illinois
1648 for reporting this issue. [ISC-Bugs #24960]
1649 One CVE number for each class of packet.
1653 - Fix the code that checks for an existing DDNS transaction to cancel
1654 when removing DDNS information, so that we will continue with the
1655 processing if we have a lease even if it doesn't have an outstanding
1656 transaction. [ISC-Bugs #24682]
1658 - Add AM_MAINTAINER_MODE to configure.ac to avoid rebuilding
1659 configuration files. [ISC-Bugs #24107]
1661 - Add support for passing DDNS information to a DNS server over
1662 an IPv6 address. [ISC-Bugs #22647]
1664 - Enhanced patch for 23595 to handle IPv4 fixed addresses more
1665 cleanly. [ISC-Bugs #23595]
1667 ! Add a check for a null pointer before calling the regexec function.
1668 Without this check we could, under some circumstances, pass
1669 a null pointer to the regexec function causing it to segfault.
1670 Thanks to a report from BlueCat Networks.
1674 ! Modify the DDNS handling code. In a previous patch we added logging
1675 code to the DDNS handling. This code included a bug that caused it
1676 to attempt to dereference a NULL pointer and eventually segfault.
1677 While reviewing the code as we addressed this problem, we determined
1678 that some of the updates to the lease structures would not work as
1679 planned since the structures being updated were in the process of
1680 being freed: these updates were removed. In addition we removed an
1681 incorrect call to the DDNS removal function that could cause a failure
1682 during the removal of DDNS information from the DNS server.
1683 Thanks to Jasper Jongmans for reporting this issue.
1687 - Fixed the code that checks if an address the server is planning
1688 to hand out is in a reserved range. This would appear as
1689 the server being out of addresses in pools with particular ranges.
1692 - In the DDNS code handle error conditions more gracefully and add more
1693 logging code. The major change is to handle unexpected cancel events
1694 from the DNS client code.
1697 - Tidy up the receive calls and eliminate the need for found_pkt.
1700 - Add support for Infiniband over sockets to the server and
1701 relay code. We've tested this on Solaris and hope to expand
1702 support for Infiniband in the future. This patch also corrects
1703 some issues we found in the socket code.
1706 - Add a compile time check for the presence of the noreturn attribute
1707 and use it for log_fatal if it's available. This will help code
1708 checking programs to eliminate false positives.
1711 - Fixed many compilation problems ("set, but not used" warnings) for
1712 gcc 4.6 that may affect Ubuntu 11.10 users. [ISC-Bugs #27588]
1714 - Modify the code that determines if an outstanding DDNS request
1715 should be cancelled. This patch results in cancelling the
1716 outstanding request less often. It fixes the problem caused
1717 by a client doing a release where the TXT and PTR records
1718 weren't removed from the DNS.
1721 - Use offsetof() instead of sizeof() to get the sizes for dhcpv6_relay_packet
1722 and dhcpv6_packet in several more places. Thanks to a report from
1723 Bruno Verstuyft and Vincent Demaertelaere of Excentis.
1726 - Remove outdated note in the description of the bootp keyword about the
1727 option not satisfying the requirement of failover peers for denying
1728 dynamic bootp clients.
1731 - Multiple items to clean up IPv6 address processing.
1732 When processing an IA that we've seen check to see if the
1733 addresses are usable (not in use by somebody else) before
1735 When reading in leases from the file discard expired addresses.
1736 When picking an address for a client include the IA ID in
1737 addition to the client ID to generally pick different addresses
1739 [ISC-Bugs #23138] [ISC-Bugs #27945] [ISC-Bugs #25586]
1742 - Remove unnecessary checks in the lease query code and clean up
1743 several compiler issues (some dereferences of NULL and treating
1744 an int as a boolean).
1747 - Fix the NA and PD allocation code to handle the case where a client
1748 provides a preference and the server doesn't have any addresses or
1749 prefixes available. Previously the server ignored the request with
1750 this patch it replies with a NoAddrsAvail or NoPrefixAvail response.
1751 By default the code performs according to the errata of August 2010
1752 for RFC 3315 section 17.2.2; to enable the previous style see the
1753 section on RFC3315_PRE_ERRATA_2010_08 in includes/site.h. This option
1754 may be removed in the future.
1755 Thanks to Jiri Popelka at Red Hat for the patch.
1758 - Fix up some issues found by static analysis.
1759 A potential memory leak and NULL dereference in omapi.
1760 The use of a boolean test instead of a bitwise test in dst.
1763 - Rotate the lease file when running in v6 mode.
1764 Thanks to Christoph Moench-Tegeder at Astaro for the
1765 report and the first version of the patch.
1768 - Correct code to calculate timing values in client to compare
1769 rebind value to infinity instead of renew value.
1770 Thanks to Chenda Huang from H3C Technologies Co., Limited
1771 for reporting this issue.
1774 - Fix some issues in the code for parsing and printing options.
1775 [ISC-Bugs #22625] - properly print options that have several fields
1776 followed by an array of something for example "fIa"
1777 [ISC-Bugs #27289] - properly parse options in declarations that have
1778 several fields followed by an array of something for example "fIa"
1779 [ISC-Bugs #27296] - properly determine if we parsed a 16 or 32 bit
1780 value in evaluate_numeric_expression (extract-int).
1781 [ISC-Bugs #27314] - properly parse a zero length option from
1782 a lease file. Thanks to Marius Tomaschewski from SUSE for the report
1783 and prototype patch for this ticket as well as ticket 27289.
1785 ! Previously the server code was relaxed to allow packets with zero
1786 length client ids to be processed. Under some situations use of
1787 zero length client ids can cause the server to go into an infinite
1788 loop. As such ids are not valid according to RFC 2132 section 9.14
1789 the server no longer accepts them. Client ids with a length of 1
1790 are also invalid but the server still accepts them in order to
1791 minimize disruption. The restriction will likely be tightened in
1792 the future to disallow ids with a length of 1.
1793 Thanks to Markus Hietava of Codenomicon CROSS project for the
1794 finding this issue and CERT-FI for vulnerability coordination.
1798 ! When attempting to convert a DUID from a client id option
1799 into a hardware address handle unexpected client ids properly.
1800 Thanks to Markus Hietava of Codenomicon CROSS project for the
1801 finding this issue and CERT-FI for vulnerability coordination.
1805 ! A pair of memory leaks were found and fixed. Thanks to
1806 Glen Eustace of Massey University, New Zealand for finding
1811 - Existing legacy unit-tests have been migrated to Automated Test
1812 Framework (ATF). Several new tests have been developed. To enable
1813 unit-tests, please use --with-atf in configure script. A Developer's
1814 Guide has been added. To generate it, please use make devel in
1815 the doc directory. It is currently in early stages of development,
1816 but is expected to grow in the near future. [ISC-Bugs 25901]
1818 ! An issue with the use of lease times was found and fixed. Making
1819 certain changes to the end time of an IPv6 lease could cause the
1820 server to abort. Thanks to Glen Eustace of Massey University,
1821 New Zealand for finding this issue.
1825 - Update the memory leakage debug code to work with v6.
1828 - Relax the requirements for deleting an A or AAAA record.
1829 Previously the DDNS removal code required both the A or AAAA
1830 record and the TXT record to exist. This requirement could
1831 cause problems if something interrupted the removal leaving
1832 the TXT record alone. This relaxation was codified in RFC 4703.
1835 - Modify the failover code to handle incorrect peer names
1836 better. Previously the structure holding the name might
1837 have been freed inappropriately in some cases and not
1838 freed in other cases.
1841 - Add a configure option, enable-secs-byteorder, to deal with
1842 clients that do the byte ordering on the secs field incorrectly.
1843 This field should be in network byte order but some clients
1844 get it wrong. When this option is enabled the server will examine
1845 the secs field and if it looks wrong (high byte non zero and low
1846 byte zero) swap the bytes. The default is disabled. This option
1847 is only useful when doing load balancing within failover.
1850 - Fix a set of issues that were discovered via a code inspection
1851 tool. Thanks to Jiri Popelka and Tomas Hozza Red Hat for the logs
1855 - Parsing unquoted base64 strings improved. Parser now properly handles
1856 strings that contain reserved names. [ISC-Bugs #23048]
1858 - Modify the nak_lease function to make some attempts to find a
1859 server-identifier option to use for the NAK.
1862 - The client now passes information about the options it requested
1863 from the server to the script code via environment variables.
1864 These variables are of the form requested_<option_name>=1 with
1865 the option name being the same as used in the new_* and old_*
1869 - Add support for a simple check that the server id in a request message
1870 to a failover peer matches the server id of the server. This support
1871 is enabled by editing the file includes/site.h and uncommenting the
1872 definition for SERVER_ID_CHECK. The option has several restrictions
1873 and issues - please read the comment in the site.h file before
1877 - Tidy up some compiler issues in the debug code.
1880 - Move the dhcpd.conf example file to dhcpd.conf.example to avoid
1881 overwriting the dhcpd.conf file when installing a new version of
1882 ISC DHCP. The user will now need to manual copy and edit the
1883 dhcpd.conf file as desired.
1886 - Check the status value when trying to read from a connection to
1887 see if it may have been closed. If it appears closed don't try
1888 to read from it again. This avoids a potential busy-wait like
1889 loop when the peer names are mismatched.
1892 - Remove an unused variable to keep compilers happy.
1895 - Modify test makefiles to be more similar to standard makefiles
1896 and comment out a currently unused test.
1899 - Address static analysis warnings.
1900 [ISC-Bugs #33510] [ISC-Bugs #33511]
1902 - Silence benign static analysis warnings.
1905 - Add check for 64-bit package for atf.
1908 - Use newer auto* tool packages and turn on RFC_3542 support on Mac OS.
1911 - Remove a variable when it isn't being used due to #ifdefs to avoid
1912 a compiler warning on Solaris using GCC.
1915 - Add a check for too much whitespace in a config or lease file.
1916 Thanks to Paolo Pellegrino for finding the issue and a suggestion
1920 - Fix several problems with using OMAPI to manipulate class and subclass
1924 - Added a sleep call after killing the old client to allow time
1925 for the sockets to be cleaned. This should allow the -r option
1926 to work more consistently.
1929 - Missing files for ISC DHCP Developer's Guide are now included in
1930 the release tarballs. To generate this documentation, please use
1931 make devel command in doc directory. [ISC-Bugs #32767]
1933 - Update client script for use with openwrt.
1936 - Fix the socket handling for DHCPv6 clients to allow multiple instances
1937 of a client on a single machine to work properly. Previously only
1938 one client would receive the packets. Thanks to Jiri Popelka at Red Hat
1939 for the bug report and a potential patch.
1942 - Added support for gentle shutdown after signal is received.
1943 [ISC-Bugs #32692] [ISC-Bugs 34945]
1945 - Enhance the DHCPv6 server logging to include the addresses that are assigned
1949 - Fix an operation in the DDNS code to be a bitwise instead of logical or.
1953 Changes since 4.1.0 (new features)
1955 - Failover port configuration can now be left to defaults (port 647) as
1956 described in the -12 revision of the Failover draft (and assigned by
1957 IANA). Thanks in part to a patch from David Cantrell at Red Hat.
1959 - If configured, dhclient may now transmit to an anycast MAC address,
1960 rather than using a broadcast address. Thanks to a patch from David
1961 Cantrell at Red Hat.
1963 - Added client support for setting interface MTU and metric, thanks to
1964 Roy "UberLord" Marples <roy@marples.name>.
1966 - Added client -D option to specify DUID type to send.
1968 - A new failover configuration parameter has been introduced for those
1969 environments where DHCP servers can be reasonably guaranteed to be
1970 "down" when the failover TCP socket is severed, "auto-partner-down".
1971 This parameter is not generally safe, and by default is disabled, so
1972 please carefully review the documentation of this parameter in the
1973 dhcpd.conf(5) manpage before determining to use it yourself.
1975 - Added a configuration function, 'gethostname()', which calls the system
1976 function of the same name and presents the results as a data expression.
1977 This function can be used to incorporate the system level hostname of
1978 the system the DHCP software is operating on in responses or queries (such
1979 as including a failover partner's hostname in a dhcp message or binding
1980 scope, or having a DHCP client send any system hostname in the host-name or
1981 FQDN options by default).
1983 - The dhcp-renewal-time and dhcp-rebinding-time options may now be configured
1984 for DHCPv4 operation and used independently of the dhcp-lease-time
1985 calculations. Invalid renew and rebinding times (e.g., greater than the
1986 determined lease time) are omitted.
1988 - Processing the DHCP to DNS server transactions in an asynchronous fashion,
1989 the DHCP server or client can now continue with its processing while
1990 awaiting replies from the DNS server.
1992 - The 'hardware [ethernet|etc] ...;' parameter in host records has been
1993 extended to attempt to match DHCPv6 clients by the last octets of a
1994 DUID-LL or DUID-LLT provided by the client.
1996 Changes since 4.1.0 (bug fixes)
1998 - Remove infinite loop in token_print_indent_concat().
2000 - Validate the argument to the -p option.
2002 - The notorious 'option <unknown> ... larger than buffer' log line,
2003 which is seen in some malformed DHCP client packets, was modified.
2004 It now logs the universe name, and does not log the length values
2005 (which are bogus corruption read from the packet anyway). It also
2006 carries a hopefully more useful explanation.
2008 - Suppress spurious warnings from configure about --datarootdir
2010 - A bug was fixed that caused the server not to answer some valid Solicit
2011 and Request packets, if the dynamic range covering any requested addresses
2012 had been deleted from configuration.
2014 - Update the code to deal with GCC 4.3. This included two sets of changes.
2015 The first is to the configuration files to include the use of
2016 AC_USE_SYSTEM_EXTENSIONS. The second is to deal with return values that
2019 - The db-time-format option was documented in manpages.
2021 - Using reserved leases no longer results in 'lease with binding state
2022 free not on its queue' error messages, thanks to a patch from Frode
2025 - Fix a build error in dhcrelay, using older versions of gcc with
2028 - Two uninitialized stack structures are now memset to zero, thanks to a
2029 patch from David Cantrell at Red Hat.
2031 - Fixed a cosmetic bug where pretty-printing valid domain-search options would
2032 result in an erroneous error log message ('garbage in format string').
2034 - A bug in DLPI packet transmission (Solaris, HP/UX) that caused the server
2035 to stop receiving packets is fixed. The same fix also means that the MAC
2036 address will no longer appear 'bogus' on DLPI-based systems.
2038 - A bug in select handling was discovered where the results of one select()
2039 call were discarded, causing the server to process the next select() call
2040 and use more system calls than required. This has been repaired - the
2041 sockets will be handled after the first return from select(), resulting in
2044 - The update-conflict-detection feature would leave an FQDN updated without
2045 a DHCID (still currently implemented as a TXT RR). This would cause later
2046 expiration or release events to fail to remove the domain name. The feature
2047 now also inserts the client's up to date DHCID record, so records may safely
2048 be removed at expiration or release time. Thanks to a patch submitted by
2051 - Memory leak in the load_balance_mine() function is fixed. This would
2052 leak ~20-30 octets per DHCPDISCOVER packet while failover was in use
2053 and in normal state.
2055 - Various compilation fixes have been included for the memory related
2056 DEBUG #defines in includes/site.h.
2058 - Fixed Linux client script 'unary operator expected' errors with DHCPv6.
2060 - Fixed setting hostname in Linux hosts that require hostname argument
2061 to be double-quoted. Also allow server-provided hostname to
2062 override hostnames 'localhost' and '(none)'.
2064 - Fixed failover reconnection retry code to continue to retry to reconnect
2065 rather than restarting the listener.
2067 - Compilation on Solaris with USE_SOCKETS defined in includes/site.h has
2068 been repaired. Other USE_ overrides should work better.
2070 - A check for the local flavor of IFNAMSIZ had a broken 'else' condition,
2071 that probably still resulted in the correct behaviour (but wouldn't use
2072 a larger defined value provided by the host OS).
2074 - Fixed a bug where an OMAPI socket disconnection message would not result
2075 in scheduling a failover reconnection, if the link had not negotiated a
2076 failover connect yet (e.g.: connection refused, asynch socket connect()
2079 - A bug was fixed that caused the 'conflict-done' state to fail to be parsed
2080 in failover state records.
2082 ! A stack overflow vulnerability was fixed in dhclient that could allow
2083 remote attackers to execute arbitrary commands as root on the system,
2084 or simply terminate the client, by providing an over-long subnet-mask
2085 option. CERT VU#410676 - CVE-2009-0692
2087 - Fixed a bug where relay agent options would never be returned when
2088 processing a DHCPINFORM.
2090 - Versions 3.0.x syntax with multiple name->code option definitions is now
2091 supported. Note that, similarly to 3.0.x, for by-code lookups only the
2092 last option definition is used.
2094 - Fixed a bug where a time difference of greater than 60 seconds between a
2095 failover pair could cause the primary to crash on contact with the
2096 secondary. Thanks to a patch from Steinar Haug.
2098 - Don't look for IPv6 interfaces on Linux when running in DHCPv4 mode.
2099 Thanks to patches from Matthew Newton and David Cantrell.
2101 - Secondary servers in a failover pair will now perform ddns removals if
2102 they had performed ddns updates on a lease that is expiring, or was
2103 released through the primary. As part of the same fix, stale binding scopes
2104 will now be removed if a change in identity of a lease's active client is
2105 detected, rather than simply if a lease is noticed to have expired (which it
2106 may have expired without a failover server noticing in some situations).
2108 - A patch supplied by David Cantrell at RedHat was applied that detects
2109 invalid calling parameters given to the ns_name_ntop() function.
2110 Specifically, it detects if the caller passed a pointer and size pair
2111 that causes the pointer to integer-wrap past zero.
2113 ! Fixed a fenceposting bug when a client had two host records configured,
2114 one using 'uid' and the other using 'hardware ethernet'. CVE-2009-1892
2116 - Fixed the check in the dhcp_interface_signal_handler routine to verify
2117 the existence of the linked signal handler before calling it.
2119 - Both host and subnet6 configuration groups are now included whether a
2120 fixed-address6 (DHCPv6) is in use or not. Host scoped configuration takes
2121 precedence. This fixes two bugs, one where host scoped configuration
2122 would not be included from a non-fixed-address6 host record, and the equal
2123 and opposite bug where subnet6 scoped configuration would not be used when
2124 over-riding values were not present in a matching fixed-address6 host
2127 - ./configure now checks to ensure the intX_t and u_intX_t types are defined,
2128 correcting a compilation failure when using Sun's compiler.
2130 - Modified the handling of a connection to avoid releasing the omapi io
2131 object for the connection while it is still in use. One symptom from
2132 this error was a segfault when a failover secondary attempted to connect
2133 to the failover primary if their clocks were not synchronized.
2135 - Clean up to allow compilation with gcc 2.95.4 on FreeBSD. Remove an
2136 extra semi-colon from common/dns.c and moved setting a variable to NULL
2137 in server/dhcpv6.c to allow the compiler to decide that the variable
2138 was always properly set.
2140 Changes since 4.1.0b1
2142 - A missing "else" in dhcrelay.c could have caused an interface not to
2145 Changes since 4.1.0a2
2147 - A cosmetic bug in DHCPDECLINE processing was fixed which caused all
2148 successful DHCPDECLINEs to be logged as "not found" rather than
2151 - Added configuration file examples for DHCPv6.
2153 - Some failover debugging #defines have been better defined and some
2154 high frequency messages moved to a deeper debugging symbol.
2156 - The CLTT parameter in failover is now only updated by client activity,
2157 and not by failover binding updates (taking on the peer's CLTT).
2159 - Failover BNDUPD messages are now discarded if they conflict with an
2160 update that has been transmitted, but not acknowledged.
2162 - A bug cleaning up unknown-xxx temporary option definitions was fixed.
2164 - Delayed-ack is now a compile-time option, compiled out by default.
2165 This feature is simply too experimental for right now, and causes
2166 some problems to some failover installations. We will revisit this
2169 - The !inet_pton() call in res_mkupdrec was adjusted to '<= 0' as
2170 inet_pton returns either 1, 0, or -1.
2172 - A dhclient-script for MacOS X has been included, which enables
2173 'dhclient -6' support.
2175 - DDNS removal routines were updated so that the DHCID is not removed until
2176 the client has been deprived of all A and AAAA records (not only the last
2177 one of either of those). This resolves a bug where dual stack clients
2178 would not be able to regain their names after either expiration event.
2180 Changes since 4.1.0a1
2182 - Corrected list of failover state values in dhcpd man page.
2184 - Fixed a bug that caused some request types to be logged incorrectly.
2186 - Clients that sent a parameter request list containing the
2187 routers option before the subnet mask option were receiving
2188 only the latter. Fixed.
2190 - The server wasn't always sending the FQDN option when it should.
2192 - A partner-down failover server no longer emits 'peer holds all free leases'
2193 if it is able to newly-allocate one of the peer's leases.
2195 - Fixed a coredump when adding a class via OMAPI.
2197 - Check whether files are zero length before trying to parse them.
2199 - Ari Edelkind's PARANOIA patch has been included and may be compiled in
2200 via two ./configure parameters, --enable-paranoia and
2201 --enable-early-chroot.
2203 - ./configure was extended to cover many optional build features, such
2204 as failover, server tracing, debugging, and the execute() command.
2206 - There is now a default 1/4 of a second scheduled delay between delayed
2207 fsync()'s, it can be configured by the max-ack-delay configuration
2210 - A bug was fixed where the length of a hostname was miscalculated, so that
2211 hosts were given odd-looking domain names ("foo.bar.ba.example.com").
2213 - Shared network selection should be done from the innermost relay
2214 valid link-address field, rather than the outermost.
2216 - Prefix pools are attached to shared network scopes.
2218 - Merged IA_XX related structures.
2220 - Add DHCPv6 files in configure.
2222 - A memory leak when using omapi has been fixed.
2224 - DHCPv6 vendor-class options (VSIO) are now only sent when they appear
2225 on the DHCPv6 ORO. This resolves a bug where VSIO options were placed
2226 in IA_NA encapsulated options fields.
2228 - Integrated client with stateless, temporary address and prefix delegation
2231 - A double-dereference in dhclient transmission of DHCPDECLINEs was
2234 - Fix handling of format code 'Z'.
2236 - Support "-1" argument in DHCPv6.
2238 - Merge DHCPv6-only "dhcrelay6" into general-purpose "dhcrelay" (use
2239 "-6" option to select DHCPv6 mode).
2241 - Fix handling of -A and -a flags in dhcrelay; it was failing to expand
2242 packet size as needed to add relay agent options.
2244 - A bug in subnet6 parsing where options contained in subnet6 clauses would
2245 not be applied to clients addressed within that network was repaired.
2247 - When configuring a "subnet {}" or "subnet6 {}" without an explicit
2248 shared-network enclosing it, the DHCP software would synthesize a
2249 shared-network to contain the subnet. However, all configuration
2250 parameters within the subnet more intuitively belong "to any client
2251 on that interface", or rather the synthesized shared-network. So,
2252 when a shared-network is synthesized, it is used to contain the
2253 configuration present inside the subnet {} clause. This means that
2254 the configuration will be valid for all clients on that network, not
2255 just those addressed out of the stated subnet. If you intended the
2256 opposite, the workaround is to explicitly configure an empty
2259 - A bug was fixed where Information-Request processing was not sourcing
2260 configured option values.
2262 - A warning was added since the DHCPv6 processing software does not yet
2263 support class statements.
2265 - Compilation warnings on GCC 4.3 relating to bootp source address
2266 selection were repaired.
2268 - The v6 BSD socket method was updated to use a single UDP BSD socket
2269 no matter how many interfaces are involved, differentiating the
2270 interfaces the packets were received on by the interface index supplied
2273 - The relay agent no longer listens to the All DHCP Servers Multicast
2276 - A bug was fixed in data_string_sprintfa() where va_start was only called
2277 once for two invocations of vsprintf() variants.
2279 - ERO (RFC 4994) server support.
2281 - Basic and partial DHCPv6 leasequery support.
2283 - Reliable DHCPv6 release (previous behavior, send release and exit, is
2284 still available with dhclient -6 -1 -r).
2286 Changes since 4.0.0 (new features)
2288 - Added DHCPv6 rapid commit support.
2290 - Added explicit parser support for zero-length DHCP options, such as
2291 rapid-commit, via format code 'Z'.
2293 - It's now possible to update the "ends" field of a lease with OMAPI.
2294 This is useful if you want not only to release a lease, but also make
2295 it available for reuse right away. Hat tip to Christof Chen.
2297 - Fixed definition of the iaaddr hash functions to use the correct
2298 functions when referencing and dereferencing memory.
2300 - Some definitions not in phase with the IANA registry were updated.
2302 - Allocated interface IDs are better controlled ('u' bit set to zero,
2303 reserved IDs avoided).
2305 - Unicast options are taken into account only for RENEWs.
2307 - NoAddrsAvail answers to SOLICITs are always ADVERTISEs even when a SOLICIT
2308 carries a rapid-commit option.
2310 - Return in place of raise an impossible condition when one tries to release
2311 an empty active lease.
2313 - Timer granularity is now 1/100s in the DHCPv6 client.
2315 - The dhclient-script was updated to create a host route for the default
2316 gateway if the supplied subnet mask for an IPv4 address was a /32. This
2317 allows the client to work in 'captive' network environments, where the
2318 operator does not want clients to crosstalk directly.
2320 - MINUS tokens should be parsable again.
2322 - Multiple (up to "delayed-ack x;" maximum) DHCPv4 packets are now queued and
2323 released in bursts after single fsync() events when the upper limit is
2324 reached or if the receiving sockets go dry. The practical upshot is
2325 that fsync-coupled server performance is now multiplicitively increased.
2326 The default delayed ack limit is 28. Thanks entirely to a patch from
2329 Changes since 4.0.0 (bug fixes)
2331 - DHCP now builds on AIX.
2333 - Exit with warning when DHCPv6-specific statements are used in the
2334 config file but -6 is not specified.
2336 - Fixed "--version" flag in dhcrelay
2338 - The 'min-secs' configuration parameter's log message has been updated to
2341 - The warning logged when an address range doesn't fit in the subnets
2342 they were declared has been updated to be more helpful and identify the
2343 typo in configuration that created the spanning addresses.
2345 - A bug in failover pool rebalancing that caused POOLREQ message ping-pongs
2348 - A flaw in failover pool rebalancing that could cause POOLREQ messages to
2349 be sent outside of the min-balance/max-balance scheduled intervals has
2352 - A cosmetic bug during potential-conflict recovery that caused the peer's
2353 'conflict-done' state message to be logged as 'unknown-state' has been
2354 repaired. It is now logged correctly.
2356 - A bug was fixed where the 'giaddr' may be used to find the client's subnet
2357 rather than its own 'ciaddr'.
2359 - A log message was introduced to clarify the situation where a failover
2360 'address' parameter (the server's local address) did not resolve to an
2363 - The minimum site code value was set to 224 in 3.1.0 to track RFC3942. This
2364 broke a lot of legacy site local configurations. The new code in place will
2365 track site local space minimum option codes and logs a warning to encourage
2366 updates and exploration of site local code migration problems. Option
2367 codes less than 128 in site local spaces remain inaccessible.
2369 - A possible relay agent option bug was repaired where random server
2370 initialization state may have been used to signal the relay agent
2371 information options sub-option code for the 'END' of the option space.
2373 - Fixes to allow code to compile and run on Solaris 9.
2375 - Fixes to allow code to compile on Mac OS X Leopard (10.5).
2377 - When server is configured with options that it overrides, a warning is
2378 issued when the configuration file is read, rather than at the time the
2379 option is overridden. This was important, because the warning was given
2380 every time the option was overridden, which could create a lot of
2381 unnecessary logging.
2383 - Fixed a compilation problems on platforms that define a value for FDDI,
2384 which conflicts with a dhcp configuration syntax token by the same name.
2386 - When a failover server suspects it has encountered a peer running a
2387 version 3.0.x failover server, a warning that the failover wire protocol
2388 is incompatible is printed.
2390 - The failover server no longer issues a floating point error if it encounters
2391 a previously undefined option code.
2393 - Fix startup error messages to report a missing "subnet6 declaration", rather
2394 than a missing "subnet declaration", when running as a DHCPv6 server.
2396 - DHCPv6 client timestamp in DUID was based on the year 1970 rather
2399 - Warn when attempting to use a hardware parameter in DHCPv6.
2401 - DHCPv6 released resources are now marked as released by the client.
2403 - 'Soft' bindings have no more side-effects.
2405 Changes since 4.0.0b3
2407 - The reverse dns name for PTR updates on IPv6 addresses has been fixed to
2408 use ip6.arpa. rather than default to in-addr.arpa and require user
2411 - dhc6_lease_destroy() and dhc6_ia_destroy() now set lease and IA pointers
2412 to NULL after freeing, to prevent subsequent accesses to freed memory.
2414 - The DHCPv6 server would not send the preference option unless the
2415 client requested it, via the ORO. This has been fixed, so the DHCPv6
2416 server will always send the preference value if it is configured.
2418 - When addresses were passed as hints to the server in an IA, they were
2419 incorrectly handled, sometimes being treated as an error. Now the
2420 server will treat these as hints and ignore them if it cannot supply
2421 a requested address.
2423 - If the client had multiple addresses, and one expired (was not renewed
2424 by the server), the client would continue to attempt to renew the same
2425 old address over and over. Now, the client will omit any expired
2426 addresses from future Confirm, Renew, or Rebind messages.
2428 - dhclient -6 will now select renew/rebind timers based upon the longest
2429 address expiration time rather than the shortest expiration time, in
2430 order to avoid cascading renewals in the event a server elects not to
2431 extend one of multiple IAADDR leases.
2433 - The server now limits clients that request multiple addresses to one
2434 address per IA by default, which can be adjusted through the
2435 "limit-addrs-per-ia" configuration option.
2437 - The DHCPv6 client now issues fresh transaction IDs on Renew and Rebind
2438 message exchanges, rather than using the most recent ID.
2440 - The DHCPv6 server now replies to Information-Request messages.
2442 - A bug was fixed in the dhclient-script for BSDs to correctly carry error
2443 codes through some conditions.
2445 - The parsing of some options in the dhclient lease file, in particular
2446 the success DHCPv6 status-code, was fixed.
2448 - A bug was fixed that caused the DHCPv6 ORO option to be corrupted with
2449 seemingly random values.
2451 - A reference overleak in DHCPv6 shared network processing was repaired.
2453 - ./configure now autodetects local database locations rather than trying
2454 to put dhcpd.leases and dhclient.leases in /usr/local/var/db, which no
2457 - Regression fix for bug where server advertised a IPv6 address in
2458 response to a SOLICIT but would not return the address in response
2461 - A bug was fixed where the DHCPv6 server puts the NoAddrsAvail status
2462 code in the IA_NA was fixed. The status code now appears in the root
2465 Changes since 4.0.0b2
2467 - Clarified error message when lease limit exceeded
2469 - Relative time may now be used as a qualifier for 'allow' and 'deny' access
2470 control lists. These directives may be used to assist in re-addressing
2471 address pools without having to constantly reconfigure the server. Please
2472 see 'man dhcpd.conf' for more information on allow/deny 'after time' syntax.
2473 Thanks to a patch from Christof Chen.
2475 - The server will now include multiple IA_NA's and multiple IAADDRs within
2476 them, if advertised by the client. It still only seeks to allocate one
2479 Changes since 4.0.0b1
2481 - Use different paths for PID and lease files when running in DHCPv4
2482 or DHCPv6 mode, so that servers for both protocols can be run
2483 simultaneously on a single interface.
2485 - Fixed a buffer overflow error which could have allowed a denial
2486 of service under unusual server configurations
2488 - Eliminated a spurious error message from the client
2490 - A number of bugs with the internal handling of lease state on the
2491 server have been fixed. Some of these could cause server crashes.
2493 - The peer_wants_leases() changes pulled up from 3.1.0 were corrected,
2494 'never used' leases will no longer consistently shift between servers
2495 on every pool rebalance run.
2497 - sendmsg()/recvmsg() control buffers are now declared in such a way to
2498 ensure they are correctly aligned on all (esp. 64-bit) architectures.
2500 - The client leasing subsystem was streamlined and corrected to account
2501 more closely for changes in client link attachment selection.
2503 Changes since 4.0.0a3
2505 - The DHCP server no longer requires a "ddns-update-style" statement,
2506 and now defaults to "none", which means DNS updates are disabled.
2508 - Log messages when failover peer names mismatch have been improved to
2509 point out the problem.
2511 - Bug where server advertised a IPv6 address in response to a SOLICIT
2512 but would not return the address in response to a REQUEST. Thanks to
2513 Dennis Kou for finding the bug.
2515 - Fixed an error causing the server to lock up on lease expiration,
2516 reported independently by Jothilingam Vasu and Dennis Kou.
2518 - Fixed a ./configure bug where compile tests were failing due to
2519 "-Werror" (unused variable) rather than the actual test failure. Lead
2520 to inconsistent and unworkable auto-configurations.
2522 - Compilation with DLPI and -Werror has been repaired.
2524 - Error in decoding IA_NA option if multiple interfaces are present
2525 fixed by Marcus Goller.
2527 - DHCPv6 server Confirm message processing has been enhanced - it no
2528 longer replies only to clients with host {} records, it now replies
2529 as directed in RFC3315 section 18.2.2 - that is, to all clients
2530 regardless of the existence of bindings.
2532 - A core dump during expired lease cleanup has been repaired.
2534 - DDNS updates state information are now stored in 'binding scopes' that
2535 follow the leases through their lifecycles. This enables DDNS teardowns
2536 on leases that are assigned and expired inbetween a server restart (the
2537 state is recovered from dhcpd.leases). Arbitrary user-specified binding
2538 scopes ('set var = "value";') are not yet supported.
2540 - Additional compilation problems on HP/UX have been repaired.
2542 Changes since 4.0.0a2
2544 - Fix for startup where there are no IPv4 addresses on an interface.
2545 Thanks to Marcus Goller for reporting the bug.
2547 - Fixed file descriptor leak on listen failure. Thanks to Tom Clark.
2549 - Bug in server configuration parser caused server to get stuck on
2550 startup for certain bad pool declarations. Thanks to Guillaume
2551 Knispel for the bug report and fix.
2553 - Code cleaned to remove warnings reported by "gcc -Wall".
2555 - DHCPv6 is now the default. You can disable DHCPv6 support using the
2556 "--disable-dhcpv6" flag when you run the configure script.
2558 - An internal database inconsistency bug was repaired where the server
2559 would segfault if a client attempted to renew a lease that had been
2560 loaded from persistent storage.
2562 - 'request' and 'also request' syntaxes have been added to accommodate
2563 the DHCPv6 client configuration. 'send dhcp6.oro' is no longer
2566 - Bug fixed where configuration file parsing did not work with
2567 zero-length options; this made it impossible to set the
2568 rapid-commit option.
2570 - Bogus messages about host records with IPv4 fixed-addresses being of
2571 non-128-bits in length were removed.
2573 Changes since 4.0.0a1
2575 - Bug in octal parsing fixed. Thanks to Bernd Fuhrmann for the report
2578 - Autoconf now supplies proper flags for Solaris DHCPv6 builds.
2580 - Fix for parsing error on some IPv6 addresses.
2582 - Invalid CIDR representation for IPv6 subnets or ranges now checked
2583 for when loading configuration.
2585 - Compilation on HP/UX has been repaired. The changes should generally
2586 apply to any architecture that supplies SIOCGLIFCONF but does not
2587 use 'struct lifconf' structures to pass values.
2589 - Two new operators, ~= and ~~, have been integrated to implement
2590 boolean matches by regular expression (such as may be used in
2591 class matching statements). Thanks to a patch by Alexandr S.
2592 Agranovsky, which underwent slight modification.
2594 - Fix for icmp packets on 64-bit systems (bug introduced in 4.0).
2596 - A bug was fixed in interface discovery wherein an error identifying
2597 a server-configured interface with no IPv4 addresses would SEGV.
2599 - Fixed a bug in which write_lease() might report a failure incorrectly
2601 - Added support for DHCPv6 Release messages
2603 - Added -x option to dhclient, which triggers dhclient processes
2604 to exit gracefully without releasing leases first
2606 - All binaries (client, server, relay) now change directories
2607 to / before going into daemon mode, so as not to hold $CWD open
2609 - Fixed a bug parsing DHCPv6 client-id's in host-identifier statements
2611 - Fixed a bug with the 'ddns-updates' boolean server configuration
2612 parameter, which caused the server to fail.
2614 Changes since 4.0.0-20070413
2616 - Old (expired) leases are now cleaned.
2618 - IPv6 subnets now have support for arbitrary allocation ranges via
2619 a new 'range6' configuration directive.
2621 - An obviated option code hash lookup to find D6O_CLIENTID was removed.
2623 - Corrected some situations where variables might be used without being
2626 - Silenced several other compiler warnings.
2628 - Include the more standard sys/uio.h rather than rely upon other
2629 header files to include it (fixes a BSD 4.2 compile failure).
2631 - Duplicate dhclient-script updates for DHCPv6 to all provided scripts.
2633 - DHCPv4 I/O methods that failed to sense hardware address were corrected.
2635 - DHCPv4 is now the default (as documented) rather than DHCPv6. The default
2636 was set to DHCPv6 to facilitate ease early development, and forgotten.
2638 - Corrected a segmentation violation in DHCPv4 socket processing.
2640 - dhclient will now fork() into the background once it binds to an
2641 IPv6 address, or immediately if the -n flag is supplied.
2643 - -q is now the default behaviour on dhclient, with -d or -v enabling
2644 non-quiet (stderr logging) mode.
2646 - Fix documentation of the domain-search atom (quoted, with commas).
2648 - Document DHCPv6 options presently in the default table.
2650 - Replaced ./configure shellscripting with GNU Autoconf.
2652 Changes since 3.1.0 (NEW FEATURES)
2654 - DHCPv6 Client and Server protocol support. Use '-6' to run the daemons
2655 as v6-only. Use '-4' to run the daemons as v4-only (default. There is
2656 no support currently for both.
2658 - Server support for multiple IA_NA options, containing at most one
2661 - Client support for one IA_NA option, containing any number of IAADDR
2664 - Server support for the DHCPv6 Information-request message.
2666 - Inappropriate unicast DHCPv6 messages sent to the server are now
2667 discarded, and this has rearchitected the IO system slightly.
2669 - The DHCPv6 server DUID defaults to type 1, is persistently stored in
2670 the leases database, and can be over-ridden (either completely, or by
2671 specifying type 1 or type 2).
2673 - The server only uses Rapid-Commit if it has been configured with the
2674 Rapid-Commit option and the client requests it.
2676 - DDNS support. We now update AAAA records in the same place we would
2677 update A records, if we have an IPv6 address. We also generate IP6.ARPA
2678 style names for PTR records if we're dealing with an IPv6 address. Both
2679 A and AAAA updates are done using the same 'fqdn.' virtual option space
2680 (although the DHCPv4 FQDN and DHCPv6 FQDN options are formatted
2681 differently, they both use the same code here).
2683 - The Linux dhclient-script attempts to set and remove assigned addresses,
2684 and to configure /etc/resolv.conf from nameserver and domain name
2685 configurations. It can be extended to configure other parameters.
2687 - Initial DHCPv6 lease support.
2689 - The IO system now tracks all local IP addresses, so that the DHCP
2690 applications (particularly the dhcrelay) can discern between what frames
2691 were transmitted to it, and what frames are being carried through it which
2692 it should not intercept.
2694 Changes since 3.1.0 (Maintenance)
2696 - A bug was repaired where MAC Address Affinity for virgin leases always
2697 mapped to the primary. Virgin leases now have an interleaved preference
2698 between primary and secondary.
2700 - A bug was repaired where MAC Address Affinity for clients with no client
2701 identifier was sometimes mishashed to the peer. Load balancing during
2702 runtime and pool rebalancing were opposing.
2704 - An assertion in lease counting relating to reserved leases was repaired.
2706 - The subnet-mask option inclusion now conforms with RFC2132 section 3.3;
2707 it will only appear prior to the routers option if it is present on the
2708 Parameter-Request-List. The subnet-mask option will also only be
2709 included by default (if it is not on the PRL) in response to DISCOVER
2710 or REQUEST messages.
2712 - The FQDN option is only supplied if the client supplied an FQDN option or
2713 if the FQDN option was explicitly requested on the PRL.
2715 - Dynamic BOOTP leases are now load balanced in failover.
2717 Changes since 3.1.0rc1
2719 - The parse warning that 'deny dynamic bootp;' must be configured for
2720 failover protected subnets was removed.
2722 Changes since 3.1.0b2
2724 - Failover rebalance events no longer play ping pong with round errors
2725 (moving leases between free and back to backup where there are an
2726 odd number of leases).
2728 - The 'pool' log line has been split into two messages, one before the
2729 rebalance run, and one after.
2731 - Any queued BNDACKs are transmitted before transmitting new BNDUPDs.
2732 This enforces the correct sequence of events for the remote server
2733 processing these messages.
2735 Changes since 3.1.0b1
2737 - Fixed a bug that caused OMAPI clients to freeze when opening lease
2740 - A new server config option "fqdn-reply" specifies whether the server
2741 should send out option 81 (FQDN). Defaults to "on". If set to "off",
2742 the FQDN option is not sent, even if the client requested it. This is
2743 needed because some clients misbehave otherwise. Thanks to Christof Chen
2746 - Allow trace output files (-tf option) to be overwritten, rather than
2747 crashing dhcpd if the file already exists
2749 - A bug was fixed that caused dhcpd to segfault if a pool was declared
2750 outside the scope of a subnet in dhcpd.conf.
2752 - Some uninitialized values were repaired in dhcpleasequery.c that
2753 caused the server to abort.
2755 - A new server config option, 'do-reverse-updates', has been added
2756 which causes the server to abstain from performing updates on PTR
2757 records. Thanks to a patch from Christof Chen at Allianz.
2759 - A bug was repaired in subencapsulation support, where spaces separated
2760 by empty spaces would not get included.
2762 - A bug in dhclient was repaired which caused it to send parameter request
2763 lists of 55 bytes in length no matter how long the declared PRL was.
2765 - 'dhcp.c(3953): non-null pointer' has been repaired. This fixes a flaw
2766 wherein the DHCPv4 server may ignore a configured server-identifier.
2768 - A flaw in failover startup sequences was repaired that sometimes left
2769 the primary DHCP server's pool rebalance schedules unscheduled.
2771 - Corrected a flaw that broke encapsulated spaces included due to presence
2772 on the parameter request list.
2774 Changes since 3.1.0a3
2776 - Some spelling fixes.
2778 Changes since 3.1.0a2
2780 - A bug was fixed where attempting to permit leasequeries results in a
2781 fatal internal error, "Unable to find server option 49".
2783 - A bug was fixed in dhclient rendering the textual output form of the
2784 domain-search option syntax.
2786 Changes since 3.1.0a1
2788 - A bug in the FQDN universe that added FQDN codes to the NWIP universe's
2789 hash table was repaired.
2791 - The servers now try harder to transmit pending binding updates when
2792 entering normal state.
2794 - UPDREQ/UPDREQALL handling was optimized - it no longer dequeues and
2795 requeues all pending updates. This should reduce the number of spurious
2796 'xid mismatch' log messages.
2798 - An option definition referencing leak was fixed, which resulted in early
2799 termination of dhclient upon the renewal event.
2801 - Some default hash table sizes were tweaked, some upwards, some downwards.
2802 3.1.0a1's tables resulted in a reduction in default server memory use.
2803 The new selected values provide more of a zero sum (increasing the size
2804 of tables likely to be populated, decreasing the size of tables unlikely).
2806 - Lease structures appear in three separate hashes: by IP address, by UID,
2807 and by hardware address. One type of table was used for all three, and
2808 improvements to IP address hashing were applied to all three (so UID and
2809 hardware addresses were treated like 4-byte integers). There are now two
2810 types of tables, and the uid/hw hashes use functions more appropriate
2813 - The max-lease-misbalance percentage no longer causes scheduled rebalance
2814 runs to be skipped: it still governs the schedule, but every scheduled
2815 run will attempt balance.
2817 - A segfault bug in recursive encapsulation support has been corrected.
2819 Changes since 3.0 (New Features)
2821 - A workaround for certain STSN servers that send a mangled domain-name
2822 option was introduced for dhclient. The client will now accept corrupted
2823 server responses, if they contain a valid DHCP_MESSAGE_TYPE (OFFER, ACK,
2824 or NAK). The server will continue to not accept corrupt client packets.
2826 - Support for 'reserved' (pseudo-static) and BOOTP leases via failover
2829 - Support for adding, removing, and managing class and subclass statements
2832 - The failover implementation was updated to comply with revision 12 of
2835 - 'make install' now creates the initial zero-length dhcpd.leases file if
2836 one does not already exist on the system.
2838 - RFC3942 compliance, site-local option spaces start at 224 now, not 128.
2840 - The Load Balance Algorithm was misimplemented. The current implementation
2843 - lcase() and ucase() configuration expressions have been added which adjust
2844 their arguments from upper to lower and lower to upper cases respectively.
2845 Thanks to a patch from Albert Herranz.
2847 - The dhclient 'reject ...;' statement, which rejects leases given by named
2848 server-identifiers, now permits address ranges to be specified in CIDR
2849 notation. Thanks to a patch from David Boyce.
2851 - The subnet-mask option is now supplied by default, but at lowest
2852 priority. This helps a small minority of clients that provide parameter
2853 request lists, but do not list the subnet-mask option because they were
2854 designed to interoperate with a server that behaves in this manner.
2856 - The FQDN option is similarly supplied even if it does not appear on the
2857 parameter request list, but not to the exclusion of options that do
2858 appear at the parameter request list. Up until now it had ultimate
2859 priority over the client's parameter request list.
2861 - Varying option space code and length bit widths (8/16/32) are now
2862 supported. This is a milestone in achieving RFC 3925 "VIVSO" and
2865 - A new common (server or client) option, 'db-time-format local;', has
2866 been added which prints the local time in /var/db/dhcpd.leases rather
2867 than UTC. Thanks to a patch from Ken Lalonde.
2869 - Some patches to improve DHCP Server startup speed from Andrew Matheson
2870 have been incorporated.
2872 - Failover pairs now implement 'MAC Affinity' on leases moving from the
2873 active to free states. Leases that belonged to the failover secondary
2874 are moved to BACKUP state rather than FREE upon exiting EXPIRED state.
2875 If lease rebalancing must move leases, it tries first to move leases
2876 that belong to the peer in need.
2878 - The server no longer sends POOLREQ messages unless the pool is severely
2879 misbalanced in the peer's favor (see 'man dhcpd.conf' for more details).
2881 - Pool rebalance events no longer happen upon successfully allocating a
2882 lease. Instead, they happen on a schedule. See 'man dhcpd.conf' for the
2883 min-balance and max-balance statements for more information.
2885 - The DHCP Relay Agent Information Option / Link Selection Sub-Option
2886 is now supported. (See RFC3527 for details).
2888 - A new DDNS related server option, update-conflict-detection, has been
2889 added. If this option is enabled, dhcpd will perform normal DHCID
2890 conflict resolution (the default). If this option is disabled, it will
2891 instead trust the assigned name implicitly (removing any other bindings
2892 on that name). This option has not been made available in dhclient.
2894 - In those cases where the DHCP software manufactures an IP header (to
2895 transmit via bpf, lpf, etc), the IP TTL the software selects has been
2896 increased from 16 to 128. This is intended to match Microsoft Windows
2897 DHCP Client behaviour, to increase compatibility.
2899 - 'ignore client-updates;' now has behaviour that is different from
2900 'deny client-updates;'. The client's request is not truly ignored,
2901 rather it is encouraged. Should this value be configured, the server
2902 updates DNS as though client-updates were set to 'deny'. That is, it
2903 enters into DNS whatever it is configured to do already, provided it is
2904 configured to. Then it sends a response to the client that lets the
2905 client believe it is performing client updates (which it will), probably
2906 for a different name. In essence, this lets the client do as it will,
2907 ignoring this aspect of their request.
2909 - Support for compressed 'domain name list' style DHCP option contents, and
2910 in particular the domain search option (#119) was added.
2912 - The DHCP LEASEQUERY protocol as defined in RFC4388 is now implemented.
2913 LEASEQUERY lets you query the DHCP server for information about a lease,
2914 using either an IP address, MAC address, or client identifier. Thanks
2915 to a patch from Justin Haddad.
2917 - DHCPD is now RFC2131 section 4.1 compliant (broadcast to all-ones ip and
2918 ethernet mac address) on the SCO platform specifically without any strange
2919 ifconfig hacks. Many thanks go to the Kroger Co. for donating the
2920 hardware and funding the development.
2922 - A new common configuration executable statement, execute(), has been
2923 added. This permits dhcpd or dhclient to execute a named external
2924 program with command line arguments specified from other configuration
2925 language. Thanks to a patch written by Mattias Ronnblom, gotten to us
2928 - A new dhcp server option 'adaptive-lease-time-threshold' has been added
2929 which causes the server to substantially reduce lease-times if there are
2930 few (configured percentage) remaining leases. Thanks to a patch submitted
2933 - Encapsulated option spaces within encapsulated option spaces is now
2936 Changes since 3.0.6rc1
2938 - supersede_lease() now requeues leases in their respective hardware
2939 address hash bucket. This mirrors client identifier behaviour.
2943 - Assorted fixes for broken network devices: Packet length is now
2944 determined from the IP header length field to finally calculate the
2945 UDP payload length, because some NIC drivers return more data than
2946 they actually received.
2948 - UDP packets are now stored in aligned data structures.
2950 - A logic error in omapi interface code was repaired that might result in
2951 incorrectly indicating 'up' state when any flags were set, rather than
2952 specifically the INTERFACE_REQUESTED flag. Thanks to a patch from
2953 Jochen Voss which got to us via Andrew Pollock at Debian.
2955 - A reference leak on binding scopes set by ddns updates was repaired.
2957 - A memory leak in the minires_nsendsigned() function call was repaired.
2958 Effectively, this leaked ~176 bytes per DDNS update.
2960 - In the case where an "L2" DHCP Relay Agent (one that does not set giaddr)
2961 was directly attached to the same broadcast domain as the DHCP server,
2962 the RFC3046 relay agent information option was not being returned to the
2963 relay in the server's replies. This was fixed; the dhcp server no longer
2964 requires the giaddr to reply with relay agent information. Note that
2965 this also improves compatibility with L2 devices that "intercept" DHCP
2966 packets and expect relay agent information even in unicast (renewal)
2967 replies. Thanks to a patch from Pekka Silvonen.
2969 - A bug was fixed where the BOOTP header 'sname' field had a value, the
2970 copy written to persistent storage was actually the contents of the
2973 - A bug was fixed where the nwip virtual option space was referencing
2974 the fqdn option's virtual option space's option cache.
2976 - Timestamp parsing errors that indicated missing "minutes" fields rather
2977 than the actually missing "seconds" fields have been repaired thanks to
2978 a patch from Kevin Steves.
2980 - A grammar error in the dhclient.8 manpage was repaired thanks to a patch
2983 - Several spelling typos were repaired, and some cross-references to other
2984 relevant documents were included in the manpages, thanks to a patch
2985 by Andrew Pollock which got to us via Tomas Pospisek.
2987 - Some bugs were fixed in the 'emergency relay agent options hologram'
2988 which is used to retain relay agent option contents from when the
2989 client was in INIT or REBIND states. This should solve problems where
2990 relay agent options were not echoed from the server, even when giaddr
2993 - dhclient now closes its descriptor to dhclient.leases prior to executing
2994 dhclient-script. Thanks to a patch from Tomas Pospisek.
2996 - The server's "by client-id" and "by hardware address" hash table lists
2997 are now sorted according to the preference to re-allocate that lease to
2998 returning clients. This should eliminate pool starvation problems
2999 arising when "INIT" clients were given new leases rather than presently
3002 Changes since 3.0.5rc1
3004 - A bug was repaired in fixes to the dhclient, which sought to run the
3005 dhclient-script with the 'EXPIRE' state should it receive a NAK in
3006 response to a REQUEST. The client now iterates the PREINIT state
3007 after the EXPIRE state, so that interfaces that might be configured
3008 'down' can be brought back 'up' and initialized.
3010 - DHCPINFORM handling for clients that properly set ciaddr and come to the
3011 server via a relay aget has been repaired.
3015 - A warning that host statements declared within subnet or shared-network
3016 scopes are actually global has been added.
3018 - The default minimum lease time (if min-lease-time was not specified)
3019 was raised from 0 to 300. 0 is not thought to be sensible, and is
3020 known to be damaging.
3022 - Added additional fatal error sanity checks surrounding lease binding
3023 state count calculations (free/active counts used for failover pool
3026 - Some time value size fixes in 3.0.4 brought on from FreeBSD /usr/ports were
3027 misapplied to server values rather than client values. The server no longer
3028 advertises 8-byte lease-time options when on 64-bit platforms.
3030 - A bug where leases not in ACTIVE state would get billed to billed classes
3031 (classes with lease limitations) was fixed. Non-active leases OFFERed
3032 to clients are no longer billed (but billing is checked before offering).
3034 - The dhcpd.conf.5 manpage was updated in regard to the ddns-domainname
3035 configuration option - the default configuration and results should be
3038 - If the dhclient were to receive a DHCPNAK while it was in the RENEW
3039 state (and consequently, had an active, 'bound' address and related
3040 configuration options), it would fail to 'tear down' this information
3041 before proceeding into INIT state. dhclient now iterates the dhclient-
3042 script with the 'EXPIRE' action to cause these teardowns prior to entering
3043 INIT state. Thanks to a patch from Chris Zimmerman.
3045 - The omapi.1 manpage had some formatting errors repaired thanks to a patch
3046 from Yoshihiko Sarumaru.
3048 - A few lines of code that were failover-specific were moved within
3049 #if defined() clauses so that compilation without failover could be
3052 - The log message emitted when the 'leased-address' value was not available
3053 in dhcpd.conf "executable statements" has been updated to be more helpful.
3054 Manpage information for this value has also been updated.
3056 - Abandoned or dissociated (err condition) leases now remove any related
3057 dynamic dns bindings. Thanks to a patch from Patrick Schoo.
3059 - Attempting to write a new lease file to replace a corrupt (due to
3060 encountering non-retryable errors during writing) lease file should
3061 no longer result in an infinite recursion.
3063 - Host declaration hardware addresses and client identifiers may only be
3064 configured once. dhcpd will now fail to load config files that specify
3065 multiple identifiers (previous versions would silently over-ride the
3066 value with the later configured value).
3068 - Several option codes that have been allocated since our last release
3069 have been named and documented.
3071 - Option names of the form "unknown-123" have been removed from the in-
3072 memory hash tables. In order to support options of these names that
3073 may appear in dhclient.leases or similar in previous versions, the
3074 parser will now find the new option code definition, or mock up a
3075 generic option code definition. This should result in a smooth
3076 transition from one name to the other, as the new name is used to
3079 Changes since 3.0.4rc1
3081 - The dhcp-options.5 manpage was updated to correct indentation errors
3082 thanks to a patch from Jean Delvare.
3084 Changes since 3.0.4b3
3086 - Some manual pages were clarified pursuant to discussion on the dhcp-server
3089 Changes since 3.0.4b2
3091 - Null-termination sensing for certain clients that unfortunately require
3092 it in DHCPINFORM processing was repaired.
3094 - The host-name option and a few others were moved from "X" format to "t"
3095 format to be compatible with new NULL handling functions.
3097 - DHCPINFORM processing is a little more careful about return addressing
3098 its responses, or if responding via a relay. The INFORM related
3099 messages also log the 'effective client ip address' rather than the
3100 client's supplied ciaddr (since some clients produce null ciaddrs).
3102 - The server was inappropriately sending leases to the RESET state in the
3103 event that multiple active leases were found to match a singly-identified
3104 client. This was changed to RELEASED (by accepting a different, ACTIVE
3105 binding, the client is implicitly releasing its lease). This repairs a
3106 bug wherein secondary servers in failover pairs detecting this condition
3107 move leases to RESET, and primaries refuse to accept that state
3108 transition (properly).
3110 - The memset-after-dmalloc() changes made in 3.0.4b1 have been backed out.
3112 Changes since 3.0.4b1
3114 - Command line parsing in omshell was repaired - it no longer closes
3115 STDIN after reading one line.
3117 - The resolver library no longer closes the /etc/resolv.conf file
3118 descriptor it opened twice.
3120 - Changes to trailing NULL removal in 't' option-atoms has been rethought,
3121 it now includes 'd' (domain name) types, and tries hard not to rewind an
3122 option beyond the start of the text field it is un-terminating.
3126 - A DDNS update handling function was misusing the DNS error codes, rather
3127 than the internal generic result enumeration. The result is a confusing
3128 syslog line, logging the wrong condition.
3130 - The DHCP Server was not checking pool balance in the case where it brought
3131 a non-ACTIVE lease out of storage for a client that was returning to use
3132 a lease it once had long ago, and had since expired.
3134 - Failover peers no longer bother to look for free leases to allocate when
3135 they already found the client's ACTIVE lease. DISCOVERs are load balanced
3136 whether freely-allocated or not, unless the server doubts the peer has
3139 - Fixed a bug in dhcrelay agent addition code that suppressed trailing
3140 PAD options - it was suppressing only one trailing PAD option, rather
3141 than the entire block of them.
3143 ! Fixed some unlikely overlapping-region memcpy() bugs in dhcrelay agent
3144 option addition and stripping code. Added a few sanity checks. Although
3145 highly improbable, due to requiring the reception of a DHCP datagram well
3146 in excess of all known to be used physical MTU limitations, it is possible
3147 this may have been used in a stack overflow security vulnerability. Thanks
3148 to a patch from infamous42md.
3150 ! Added some sanity checks to OMAPI connection/authentication code.
3151 Although highly improbable, due to having to deliver in excess of 2^32
3152 bytes of data via the OMAPI channel, not to mention requiring dhcpd to
3153 be able to malloc() a memory region 2^32 bytes in size, it was possible
3154 this might have resulted in a heap overflow security vulnerability.
3155 Thanks to a patch from infamous42md.
3157 - dmalloc() memset()'s the non-debug (data) portion of the allocated
3158 memory to zero. Code that memset()'s the result returned by dmalloc() to
3159 zero is redundant. These redundancies were removed.
3161 - Some type declaration corrections to u_int16_t were made in common/tr.c
3162 (Token Ring support) thanks to a patch from Jason Vas Dias at Red Hat.
3164 - A failover bug that was allowing leases that EXPIRED or were RELEASED
3165 where tsfp and tstp are identical timestamps to languish in these
3166 transitional states has been repaired. As a side effect, lease
3167 databases should be kept more consistent overall, not just for these
3168 transitional states.
3170 - If the lease db is deleted out from under the daemon, and it moves to rewrite
3171 the db, it will go ahead with the operation and move the new db into place
3172 once it detects the old db does not exist.
3174 - dhclient now ignores IRDA, SIT, and IEEE1394 network interfaces, as it
3175 is either nonsensical or (in the case of IEEE1394) is not known to support
3176 these interfaces. Thanks to Marius Gedminas and Andrew Pollock of Debian.
3178 - Some previously undocumented reasons for dhclient-script invoking has
3179 been documented in the dhclient-script.8 manpage.
3181 - Failover potential expiry calculations (TSTP) have been corrected. Results
3182 should be substantially more consistent, and proper given the constraints.
3184 - Adjusted lease state validation checks in potential-conflict, to
3185 account for possible clock skew similarly to normal state, and several
3186 previously illegal transitions were made legal (ex: active->released).
3188 - An impossible sanity check was removed from omapi/buffer.c, thanks to a
3189 patch from 'infamous42md'.
3191 - An OMAPI host/network byte order problem in lease time values has been
3194 - Several minor bugs, largely relating to treating 8-byte time values as
3195 4-byte entities, have been repaired after careful review of the FreeBSD
3196 ports collection's patch set. Thanks to the nameless entities who have
3197 contributed to the FreeBSD ports.
3199 - When writing a trace file, the file is now created with permissions 0600,
3200 to help administrators avoid accidentally publicising sensitive config
3203 - The calculation of the maximum size of DHCP packets no longer includes
3204 Ethernet framing overhead. The result is that the 'Maximum Message
3205 Size' option advertised by clients, or the default value 576, is no
3206 longer reduced by 14 bytes, and instead directly reflects the IP level
3207 MTU (and the default, minimum allowed IP MTU of 576).
3209 - The special status of RELEASED/EXPIRED/RESET leases when a server
3210 is operating in partner-down was fixed. It no longer requires a
3211 lease be twice the MCLT beyond STOS to 'reallocate', and the expiry
3212 event to turn these into FREE leases without peer acknowledgement
3213 (after STOS+MCLT) has been repaired.
3215 - Compilation on older Solaris systems (lacking /usr/include/sys/int_types.h)
3218 - "append"ing a string onto the end of a "t" type option (such as the
3219 domain-name field) that had been improperly NULL-terminated by the
3220 DHCP server will no longer result in a truncated string containing
3221 only the option from the server, and not the expected appended value.
3222 Thanks to a patch from Jason Vas Dias at Red Hat.
3224 - File handlers on configuration state (config files and lease dbs) should
3225 be treated consistently, regardless of whether TRACING is defined or not.
3227 - The Linux build environment has had some minor improvements - better
3228 sensing of 64-bit pointer sizes (only used for establishing an icmp_id),
3229 and corrections to #if operators regarding LINUX_MAJOR should it ever
3232 - The server now tries harder to survive the condition where it is unable
3233 to open a new lease file to rewrite the lease state database.
3235 Changes since 3.0.3b3
3237 - dhclient.conf documentation for interface {} was updated to reflect recent
3238 discussion on the dhcp-hackers mailing list.
3240 - In response to reports that the software does not compile on GCC 4.0.0,
3241 -Werror was removed from Makefile.conf for all platforms that used it.
3242 We will address the true problem in a future release; this is a temporary
3245 Changes since 3.0.3b2
3247 - An error in code changes introduced in 3.0.3b2 was corrected, which caused
3248 static BOOTP clients to receive random addresses.
3250 Changes since 3.0.3b1
3252 - A bug was fixed in BOOTPREQUEST handling code wherein stale references to
3253 host records would be left behind on leases that were not allocated to the
3254 client currently booting (eg in the case where the host was denied booting).
3256 - The dhcpd.conf.5 manpage was updated to be more clear in regards to
3257 multiple host declarations (thanks to Vincent McIntyre). 'Interim' style
3258 dynamic updates were also retouched.
3262 - A bug was fixed where a server might load balance a DHCP REQUEST to its
3263 peer after already choosing not to load balance the preceding DISCOVER.
3264 The peer cannot allocate the originating server's lease.
3266 - In the case where a secondary server lost its stable storage while the
3267 primary was still in communications-interrupted, and came back online,
3268 the lease databases would not be fully transferred to the secondary.
3269 This was due to the secondary errantly sending an extra UPDREQ message
3270 when the primary made its state transition to PARTNER-DOWN known.
3272 - The package will now compile cleanly in gcc 3.3 and 3.4. As a side effect,
3273 lease structures will be 9 bytes smaller on all platforms. Thanks to
3274 Jason Vas Dias at Red Hat.
3276 - Interface discovery code in DISCOVER_UNCONFIGURED mode is now
3277 properly restricted to only detecting broadcast interfaces. Thanks
3278 to a patch from Jason Vas Dias at Red Hat.
3280 - decode_udp_ip_header was changed so that the IP address was copied out
3281 to a variable, rather than referenced by a pointer. This enforces 4-byte
3282 alignment of the 32-bit IP address value. Thanks to a patch from Dr.
3285 - An incorrect log message was corrected thanks to a patch from
3288 - A bug in DDNS was repaired, where if the server's first DDNS action was
3289 a DDNS removal rather than a DDNS update, the resolver library's
3290 retransmit timer and retry timer was set to the default, implying a
3291 15 second timeout interval. Which is a little excessive in a synchronous,
3292 single-threaded system. In all cases, ISC DHCP should now hold fast to
3293 a 1-second timeout, trying only once.
3295 - The siaddr field was being improperly set to the server-identifier when
3296 responding to DHCP messages. RFC2131 clarified the siaddr field as
3297 meaning the 'next server in the bootstrap process', eg a tftp server.
3298 The siaddr field is now left zeroed unless next-server is configured.
3300 - mockup_lease() could have returned in an error condition (or in the
3301 condition where no fixed-address was found matching the shared
3302 network) with stale references to a host record. This is probably not
3303 a memory leak since host records generally never die anyway.
3305 - A bug was repaired where failover servers would let stale client identifiers
3306 persist on leases that were reallocated to new clients not sending an id.
3308 - Binding scopes ("set var = value;") are now removed from leases allocated
3309 by failover peers if the lease had expired. This should help reduce the
3310 number of stale binding scopes on leases.
3312 - A small memory leak was closed involving client identifiers larger than
3313 7 bytes, and failover.
3315 - Configuring a subnet in dhcpd.conf with a subnet mask of 32 bits might
3316 cause an internal function to overflow heap. Thanks to Jason Vas Dias
3319 - Some inconsistencies in treating numbers that the lexer parsed as 'NUMBER'
3320 or 'NUMBER_OR_NAME' was repaired. Hexadecimal parsing is affected, and
3323 - In several cases, parse warnings were being issued before the lexical
3324 token had been advanced to the token whose value was causing an error...
3325 causing parse warnings to claim the problem is on the wrong token.
3327 - Host declarations matching on client identifier for dynamic leases will
3328 no longer match fixed-address host declarations (this is now identical
3329 to behaviour for host records matching on hardware address).
3331 Changes since 3.0.2rc3
3333 - A previously undocumented configuration directive, 'local-address',
3334 was documented in the dhcpd.conf manpage.
3336 Changes since 3.0.2rc2
3338 - Two variables introduced in 3.0.2b1 were used without being initialized
3339 in the case where neither the FILE nor SNAME fields were available for
3340 overloading. This was repaired.
3342 - A heretofore believed to be impossible corner case of the option
3343 overloading implementation turned out to be possible ("Unable to sort
3344 overloaded options after 10 tries."). The implementation was reworked
3345 to consider the case of an option so large it would require more than
3346 three chunks to fit.
3348 - Many other instances of variables being used without being initialized
3351 - An uninitialized variable in omapi_io_destroy() led to the discovery
3352 that this function may result in orphaned pointers (and hence, a memory
3355 Changes since 3.0.2rc1
3357 - allocate_lease() was rewritten to repair a bug in which the server would
3358 try to allocate an ABANDONED lease when FREE leases were available.
3360 Changes since 3.0.2b1
3362 - Some dhcp-eval.5 manpage formatting was repaired.
3366 - A bug was fixed in the server's 'option overloading' implementation,
3367 where options loaded into the 'file' and 'sname' packet fields were
3368 not aligned precisely as rfc2131 dictates.
3370 - The FreeBSD client script was changed to support the case where a domain
3371 name was not provided by the server.
3373 - A memory leak in 'omshell' per each command line parsed was
3374 repaired, thanks to a patch from Jarkko Torppa.
3376 - Log functions writing to stderr were adjusted to use the STDERR_FILENO
3377 system definition rather than '2'. This is a no-op for 90% of platforms.
3379 - One call to trace_write_packet_iov() counted the number of io vectors
3380 incorrectly, causing inconsistent tracefiles. This was fixed.
3382 - Some expression parse failure memory leaks were closed.
3384 - A host byte order problem in tracefiles was repaired.
3386 - Pools configured in DHCPD for failover possessing permission lists that
3387 previously were assumed to not include dynamic bootp clients are now
3388 a little more pessimistic. The result is, dhcpd will nag you about just
3389 about most pools that possess a 'allow' statement with no 'deny' that
3390 would definitely match a dynamic bootp client.
3392 - The 'ddns-update-style' configuration warning bit now insists that
3393 the configuration be globally scoped.
3395 - Two memory leaks in dhclient were closed thanks to a patch from Felix
3398 - Some minor but excellently pedantic documentation errors were fixed
3399 thanks to a patch from Thomas Klausner.
3401 - Bugs in operator precedence in executable statements have been repaired
3402 once again. More legal syntaxes should be parsed legally.
3404 - Failing to initialize a tracefile for any reason if a tracefile was
3405 specified is now a fatal error. Thanks to a patch from Albert Herranz.
3407 - Corrected a bug in which the number of leases transferred as calculated
3408 by the failover primary and sent to peers in POOLRESP responses may be
3409 incorrect. This value is not believed to be used by other failover
3410 implementations, excepting perhaps as logged information.
3412 - Corrected a bug in which 'dhcp_failover_send_poolresp()' was in fact
3413 sending POOLREQ messages instead of POOLRESP mesasges. This message
3414 was essentially ignored since failover secondaries effectively do not
3415 respond to POOLREQ messages.
3417 - Type definitions for various bitwidths of integers in the sunos5-5
3418 build of ISC DHCP have been fixed. It should compile and run more
3419 easily when built in 64-bit for this platform.
3421 - "allow known-clients;" is now a legal syntax, to avoid confusion.
3423 - If one dhcp server chooses to 'load balance' a request to its failover
3424 peer, it first checks to see if it believes said peer has a free
3425 lease to allocate before ignoring the DISCOVER.
3427 - log() was logging a work buffer, rather than the value returned by
3428 executing the statements configured by the user. In some cases,
3429 the work buffer and the intended results were the same. In some other
3430 cases, they were not. This was fixed thanks to a patch from Gunnar
3431 Fjone and directconnect.no.
3433 - Compiler warnings for some string type conversions was fixed, thanks
3434 to Andreas Gustafsson.
3436 - The netbsd build environments were simplified to one, in which
3437 -Wconversion is not used, thanks to Andreas Gustafsson.
3439 - How randomness in the backoff-cutoff dhclient configuration variable
3440 is implemented was better documented in the manpage, and the behaviour
3441 of dhclient in REQUEST timeout handling was changed to match that of
3442 DISCOVER timeout handling.
3444 - Omapi was hardened against clients that pass in null values, thanks
3445 to a patch from Mark Jason Dominus.
3447 - A bug was fixed in dhclient that kept it from doing client-side
3448 ddns updates. Thanks to a patch from Andreas Gustafsson, which
3449 underwent some modification after review by Jason Vas Dias.
3451 - Failover implementations disconnected due to the network between
3452 them (rather than one of the two shutting down) will now try to
3453 re-establish the failover connection every 5 seconds, rather than
3454 to simply try once and give up until one of them is restarted.
3455 Thanks to a patch from Ulf Ekberg from Infoblox, and field testing
3456 by Greger V. Teigre which led to an enhancement to it.
3458 - A problem that kept DHCP Failover secondaries from tearing down
3459 ddns records was repaired. Thanks to a patch from Ulf Ekberg from
3462 - 64bit pointer sizes are detected properly on FreeBSD now.
3464 - A bug was repaired where the DHCP server would leave stale references
3465 to host records on leases it once thought about offering to certain
3466 clients. The result would be to apply host and 'known' scopes to the
3467 wrong clients (possibly denying booting). NOTE: The 'mis-host' patch
3468 that was being circulated as a workaround is not the way this bug was
3469 fixed. If you were a victim of this bug in 3.0.1, you are cautioned
3470 to proceed carefully and see if it fixes your problem.
3472 - A bug was repaired in the server's DHCPINFORM handling, where it
3473 tried to divine the client's address from the source packet and
3474 would get it wrong. Thanks to Anshuman Singh Rawat.
3476 - A log message was introduced to help illuminate the case where the
3477 server was unable to find a lease to assign to any BOOTP client.
3478 Thanks to Daniel Baker.
3480 - A minor dhcpd.conf.5 manpage error was fixed.
3482 Changes since 3.0.1rc14
3484 - The global variable 'cur_time' was centralized and is now uniformly of a
3485 type #defined in system-dependent headers. It had previously been defined
3486 in one of many places as a 32-bit value, and this causes mayhem on 64-bit
3487 big endian systems. It probably wasn't too healthy on little endian
3490 - A printf format string error introduced in rc14 was repaired.
3492 - AIX system-dependent header file was altered to only define NO_SNPRINTF
3493 if the condition used to #ifdef in vsnprintf in AIX' header files
3496 - The Alpha/OSF system-dependent header file was altered to define
3497 NO_SNPRINTF on OS revisions older than 4.0G.
3499 - omapip/test.c had string.h added to its includes.
3501 Changes since 3.0.1rc13
3503 ! CAN-2004-0460 - CERT VU#317350: Five stack overflow exploits were closed
3504 in logging messages with excessively long hostnames provided by the
3505 clients. It is highly probable that these could have been used by
3506 attackers to gain arbitrary root access on systems using ISC DHCP 3.0.1
3507 release candidates 12 or 13. Special thanks to Gregory Duchemin for
3508 both finding and solving the problem.
3510 ! CAN-2004-0461 - CERT VU#654390: Once the above was closed, an opening
3511 in log_*() functions was evidenced, on some specific platforms where
3512 vsnprintf() was not believed to be available and calls were wrapped to
3513 sprintf() instead. Again, credit goes to Gregory Duchemin for finding
3514 the problem. Calls to snprintf() are now linked to a distribution-local
3515 snprintf implementation, only in those cases where the architecture is
3516 not known to provide one (see includes/cf/[arch].h). If you experience
3517 linking problems with snprintf/vsnprintf or 'isc_print_' functions, this
3518 is where to look. This vulnerability did not exist in any previously
3519 published version of ISC DHCP.
3521 - Compilation on hpux 11.11 was repaired.
3523 - 'The cross-compile bug fix' was backed out.
3525 Changes since 3.0.1rc12
3527 - Fixed a bug in omapi lease lookup function, to form the hardware
3528 address for the hash lookup correctly, thanks to a patch from
3531 - Fixed a bug where dhcrelay was sending relayed responses back to the
3532 broadcast address, but with the source's unicast mac address. Should
3533 now conform to rfc2131 section 4.1.
3535 - Cross-compile bug fix; use $(AR) instead of ar. Thanks to Morten Brorup.
3537 - Fixed a crash bug in dhclient where dhcpd servers that do not provide
3538 renewal times results in an FPE. As a side effect, dhclient can now
3539 properly handle 0xFFFFFFFF (-1) expiry times supplied by servers. Thanks
3540 to a patch from Burt Silverman.
3542 - The 'ping timeout' debugs from rc12 were removed to -DDEBUG only,
3543 and reformatted to correct a compilation error on Solaris platforms.
3545 - A patch was applied which fixes a case where leases read from the
3546 leases database do not properly over-ride previously read leases.
3548 - dhcpctl.3 manpage was tweaked.
3550 Changes since 3.0.1rc11
3552 - A patch from Steve Campbell was applied with minor modifications to
3553 permit reverse dns PTR record updates with values containing spaces.
3555 - A patch from Florian Lohoff was applied with some modifications to
3556 dhcrelay. It now discards packets whose hop count exceeds 10 by default,
3557 and a command-line option (-c) can be used to set this threshold.
3559 - A failover bug relating to identifying peers by name length instead of
3562 - Declaring failover configs within shared-network statements should no
3563 longer result in error.
3565 - The -nw command line option to dhclient now works.
3567 - Thanks to a patch from Michael Richardson:
3568 - Some problems with long option processing have been fixed.
3569 - Some fixes to minires so that updates of KEY records will work.
3571 - contrib/ms2isc was updated by Shu-Min Chang of the Intel Corporation.
3572 see contrib/ms2isc/readme.txt for revision notes.
3574 - Dhclient no longer uses shell commands to kill another instance of
3575 itself, it sends the signal directly. Thanks to a patch from Martin
3578 - The FreeBSD dhclient-script was changed so that a failure to write to
3579 /etc/resolv.conf does not prematurely end the script. This keeps dhclient
3580 from looping infinitely when this is the case. Thanks to a patch from
3583 - A patch from Bill Stephens was applied which resolves a problem with lease
3584 expiry times in failover configurations.
3586 - A memory leak in configuration parsing was closed thanks to a patch from
3589 - The function which discovers interfaces will now skip non-broadcast or
3590 point-to-point interfaces, thanks to a patch from David Brownlee.
3592 - Options not yet known by the dhcpd or dhclient have had their names
3593 changed such that they do not contain # symbols, in case they should ever
3594 appear in a lease file. An option that might have been named "#144" is
3597 - Another patch from Bill Stephens which allows the ping-check timeout to
3598 be configured as 'ping-timeout'. Defaults to 1.
3600 Changes since 3.0.1rc10
3602 - Potential buffer overflows in minires repaired.
3604 - A change to the linux client script to use /bin/bash, since /bin/sh may
3607 - Some missing va_end cleanups thanks to a patch from Thomas Klausner.
3609 - A correction of boolean parsing syntax validation - some illegal syntaxes
3610 that worked before are now detected and produce errs, some legal syntaxes
3611 that errored before will now work properly.
3613 - Some search-and-replace errors that caused some options to change their
3616 - Shu-min Chang of the Intel corporation has contributed a perl script and
3617 module that converts the MS NT4 DHCP configuration to a ISC DHCP3
3620 - Applied the remainder of the dhcpctl memory leak patch provided by Bill
3621 Squier at ReefEdge, Inc. (groo@reefedge.com).
3623 - Missing non-optional failover peer configurations will now result in a soft
3624 error rather than a null dereference.
3626 Changes since 3.0.1rc9
3628 - A format string was corrected to fix compiler warnings.
3630 - A number of spelling corrections were made in the man pages.
3632 - The dhclient.conf.5 man page was changed to refer to do-forward-updates
3633 rather than a configuration option that doesn't exist.
3635 - A FreeBSD-specific bug in the interface removal handling was fixed.
3637 - A Linux-specific Token Ring detection problem was fixed.
3639 - Hashes removed from as-yet-unknown agent options, having those options
3640 appear in reality before we know about them will no longer produce
3641 self-corrupting lease databases.
3643 - dhclient will use the proper port numbers now when using the -g option.
3645 - A order-of-operations bug with 2 match clauses in 1 class statement is
3646 fixed thanks to a patch from Andrew Matheson.
3648 - Compilation problems on Solaris were fixed.
3650 - Compilation problems when built with DEBUG or DEBUG_PACKET were repaired.
3652 - A fix to the dhcp ack process which makes certain group options will be
3653 included in the first DHCPOFFER message was made thanks to a patch from
3656 - A few memory leaks were repaired thanks to patches from Bill Squier at
3657 ReefEdge, Inc. (groo@reefedge.com).
3659 - A fix for shared-networks that sometimes give clients options for the
3660 wrong subnets (in particular, 'option routers') was applied, thanks to
3661 Ted Lemon for the patch.
3663 - Omshell's handling of dotted octets as values was changed such that dots
3664 one after the other produce zero values in the integer string.
3666 Changes since 3.0.1rc8
3668 - Fix a format string vulnerability in the server that could lead to a
3669 remote root compromise (discovered by NGSEC Research Team, www.ngsec.com).
3671 - Add additional support for NetBSD/sparc64.
3673 - Fix a bug in the command-line parsing of the client. Also, resolve
3676 - Add better support for shells other than bash in the Linux client
3679 - Various build fixes for modern versions of FreeBSD and Linux.
3681 - Fix a bad bounds check when printing binding state names.
3683 - Clarify documentation about fixed-address and multiple addresses.
3685 - Fix a typo in the authoritative error message.
3687 - Make a log entry when we can't write a billing class.
3689 - Use conversion targets that are the right size on all architectures.
3691 - Increment the hop count when relaying.
3693 - Log a message when lease state is changed through OMAPI.
3695 - Don't rerun the shared_network when evaluating the pool.
3697 - Fix a reversed test in the parser.
3699 - Change the type of rbuf_max.
3701 - Make FTS_LAST a manifest constant to quiet warnings.
3703 Changes since 3.0.1rc7
3705 - Fix two compiler warnings that are generated when compiling on Solaris
3706 with gcc. These stop the build, even though they weren't actually
3707 errors, because we prefer that our builds generate no warnings.
3709 Changes since 3.0.1rc6
3711 - Don't allow a lease that's in the EXPIRED, RELEASED or RESET state
3714 - Implement lease stealing for cases where the primary has fewer leases
3715 than the secondary, as called for by the standard.
3717 - Add a fudge factor to the lease expiry acceptance code, (suggested
3718 by Kevin Miller of CMU).
3720 - Fix a bug in permit_list_match that made it much too willing to say
3721 that two permit lists matched.
3723 - Unless DEBUG_DNS_UPDATES is defined, print more user-friendly (and
3724 also more compact) messages about DNS updates.
3726 - Fix a bug in generating wire-format domain names for the FQDN option.
3728 - Fix a bug where the FQDN option would not be returned if the client
3729 requested it, contrary to the standard.
3731 - On Darwin, use the FreeBSD DHCP client script.
3733 - On NetBSD/sparc, don't check for casting warnings.
3735 - Add a flag in the DHCP client to disable updating the client's A
3736 record when sending an FQDN option indicating that the client is
3737 going to update its A record.
3739 - In the client, don't attempt a DNS update until one second after
3740 configuring the new IP address, and if the update times out, keep
3741 trying until a response, positive or negative, is received from the
3744 - Fix an uninitialized memory bug in the DHCP client.
3746 - Apply some FreeBSD-specific bug fixes suggested by Murray Stokely.
3748 - Fix a bug in ns_parserr(), where it was returning the wrong sort
3749 of result code in some cases (suggested by Ben Harris of the
3752 - Fix a bug in is_identifier(), where it was checking against EOF
3753 instead of the END_OF_FILE token (also suggested by Ben Harris).
3755 - Fix a bug where if an option universe contained no options, the
3756 DHCP server could dump core (Walter Steiner).
3758 - Fix a bug in the handling of encapsulated options.
3760 - Fix a bug that prevented NWIP suboptions from being processed.
3762 - Delete the FTS_BOOTP and FTS_RESERVED states and implement them
3763 as modifier flags to the FTS_ACTIVE state, as called for in the
3764 failover protocol standard.
3766 - Fix bugs in the pool merging code that resulted in references and
3767 dereferences of null pointers. This bug had no impact unless the
3768 POINTER_DEBUG flag was defined.
3770 - In the server, added a do-forward-updates flag that can be used to
3771 disable forward updates in all cases, so that sites that want the
3772 clients to take sole responsibility for updating their A record can
3775 - Make it possible to disable optimization of PTR record updates.
3777 Changes since 3.0.1rc5
3779 - Include some new documentation and changes provided by Karl Auer.
3781 - Add a workaround for some Lexmark printers that send a double-NUL-
3782 terminated host-name option, which would break DNS updates.
3784 - Fix an off-by-one error in the MAC-address checking code for
3785 DHCPRELEASE that was added in 3.0.1rc5.
3787 - Fix a bug where client-specific information was not being discarded
3788 from the lease when it expired or was released, resulting in
3789 problems if the lease was reallocated to a different client.
3791 - If more than one allocation pool is specified that has the same set
3792 of constraints as another allocation pool on the same shared
3793 network, merge the two pools.
3795 - Don't print an error in fallback_discard, since this just causes
3796 confusion and does not appear to be helping to encourage anyone to
3799 Changes since 3.0.1rc4
3801 - Fix a bug that would cause the DHCP server to spin if asked to parse
3802 a certain kind of incorrect statement.
3804 - Fix a related bug that would prevent an error from being reported in
3807 - Additional documentation.
3809 - Make sure that the hardware address matches the lease when
3810 processing a DHCPRELEASE message.
3812 Changes since 3.0.1rc3
3814 - A minor bug fix in the arguments to a logging function call.
3815 - Documentation update for dhcpd.conf.
3817 Changes since 3.0.1rc2
3819 - Allow the primary to send a POOLREQ message. This isn't what the current
3820 failover draft says to do, so we may have to back it out if I can't get the
3821 authors to relent, but the scheme for balancing that's specified in the
3822 current draft seems needlessly hairy, so I'm floating a trial balloon.
3823 The rc1 code did not implement the method described in the draft either.
3825 Changes since 3.0.1rc1
3827 - Treat NXDOMAIN and NXRRSET as success when we are trying to delete a
3828 domain or RRSET. This allows the DHCP server to forget about a name
3829 it added to the DNS once it's been removed, even if the DHCP server
3830 wasn't the one that removed it.
3832 - Install defaults for failover maximum outstanding updates and maximum
3833 silent time. This prevents problems that might occur if these values
3834 were not configured.
3836 - Don't do DDNS deletes if ddns-update-style is none.
3838 - Return relay agent information options in DHCPNAK. This prevents DHCPNAK
3839 messages from being dropped when the relay agent information option contains
3840 routing information.
3842 - Fix a problem where coming up in recover wouldn't result in an update
3845 - Add some more chatty messages when we start a recovery update and when it's
3848 - Fix a possible problem where some state might have been left around
3849 after the peer lost contact and regained contact about how many updates
3852 - Don't nix a lease update because of a lease conflict. This test has
3853 never (as far as I know) prevented a mistake, and it appears to cause
3854 problems with failover.
3856 - Add support in rc history code for keeping a selective history, rather
3857 than a history of all references and dereferences. This code is only used
3858 when extensive additional debugging is enabled.
3862 - Make allocators for hash tables. As a side effect, this fixes a memory
3863 smash in the subclass allocation code.
3865 - Fix a small bug in omshell where if you try to close an object when
3866 no object is open, it dumps core.
3868 - Fix an obscure coredump that could occur on shutdown.
3870 - Fix a bug in the recording of host declaration rubouts in the lease file.
3872 - Fix two potential spins in the host deletion code.
3874 - Fix a core dump that would happen if an application tried to update
3875 a host object attribute with a null value.
3877 Changes since 3.0 Release Candidate 12
3879 - Fix a memory leak in the evaluation code.
3881 - Fix an obscure core dump.
3883 - Print a couple of new warnings when parsing the configuration file
3884 when crucial information is left out.
3886 - Log "no free leases" as an error.
3888 - Documentation updates.
3890 Changes since 3.0 Release Candidate 11
3892 - Always return a subnet selection option if one is sent.
3894 - Fix a warning that was being printed because an automatic data
3895 structure wasn't zeroed.
3897 - Fix some failover state transitions that were being handled
3900 - When supersede_lease is called on a lease whose end time has already
3901 expired, but for which a state transition has not yet been done, do
3902 a state transition. This fixes the case where if the secondary
3903 allocated a lease to a client and the lease "expired" while the
3904 secondary was in partner-down, no expiry event would actually
3905 happen, so the lease would remain active until the primary was
3908 Changes since 3.0 Release Candidate 10
3910 - Fix a bug that was preventing released leases from changing state
3911 in failover-enabled pools.
3913 - Fix a core dump in the client identifier finder code (for host
3916 - Finish fixing a bug where bogus data would sometimes get logged to
3917 the dhclient.leases file because it was opened as descriptor 2.
3919 - Fix the Linux dhclient-script according to suggestions made by
3920 several people on the dhcp-client mailing list.
3922 - Log successful DNS updates at LOG_INFO, not LOG_ERROR.
3924 - Print an error message and refuse to run if a failover peer is
3925 defined but not referenced by any pools.
3927 - Correct a confusing error message in failover.
3929 Changes since 3.0 Release Candidate 9
3931 - Fix a bug in lease allocation for Dynamic BOOTP clients.
3933 Changes since 3.0 Release Candidate 8 Patchlevel 2
3935 - Fix a bug that prevented update-static-leases from working.
3937 - Document failover-state OMAPI object.
3939 - Fix a compilation error on SunOS 4.
3941 Changes since 3.0 Release Candidate 8 Patchlevel 1
3943 - Fix a parsing bug that broke dns updates (both interim and ad-hoc).
3944 This was introduced in rc8pl1 as an unintended result of the memory
3945 leakage fixes that were in pl1.
3947 - Fix a long-standing bug where the server would record that an update
3948 had been done for a client with no name, even though no update had
3949 been done, and then when the client's lease expired the deletion of
3950 that nonexistant record would time out because the name was the null
3953 - Clean up the omshell, dhcpctl and omapi man pages a bit.
3955 Changes since 3.0 Release Candidate 8
3957 - Fix a bug that could cause the DHCP server to spin if
3958 one-lease-per-client was enabled.
3960 - Fix a bug that was causing core dumps on BSD/os in the presence of
3963 - In partner-down state, don't restrict lease lengths to MCLT.
3965 - On the failover secondary, record the MCLT received from the primary
3966 so that if we come up without a connection to the primary we don't
3967 wind up giving out zero-length leases.
3969 - Fix some compilation problems on BSD/os.
3971 - Fix a bunch of memory leaks.
3973 - Fix a couple of bugs in the option printer.
3975 - Fix an obscure error reporting bug in the dns update code, and also
3976 make the message clearer when a key algorithm isn't supported.
3978 - Fix a bug in the tracing code that prevented trace runs that used
3979 tcp connections from being played back.
3981 - Add some additional debugging capability for catching memory leaks
3984 - Make the client release the lease correctly on shutdown.
3986 - Add some configurability to the build system.
3988 - Install omshell manual page in man1, not man8.
3990 - Craig Gwydir sent in a patch that fixes a long-standing bug in the
3991 DHCP client that could cause core dumps, but that for some reason
3992 hadn't been noticed until now.
3994 Changes since 3.0 Release Candidate 7
3996 - Fix a bug in failover where we weren't sending updates after a
3997 transition from communications-interrupted to normal.
3999 - Handle expired/released/reset -> free transition according to the
4000 protocol specification (this works - the other way not only wasn't
4001 conformant, but also didn't work).
4003 - Add a control object in both client and server that allows either
4004 daemon to be shut down cleanly.
4006 - When writing a lease, if we run out of disk space, shut down the
4007 output file and insist on writing a new one before proceeding.
4009 - In the server, if the OMAPI listener port is occupied, keep trying
4010 to get it, rather than simply giving up and exiting.
4012 - Support fetching variables from leases and also updating and adding
4013 variables to leases via OMAPI.
4015 - If two failover peers have wildly different clocks, refuse to start
4018 - Fix a bug in the DNS update code that could cause core dumps when
4019 running on alpha processors.
4021 - Fixed a bug in ddns updates for static lease entries, thanks to a
4022 patch from Andrey M Linkevitch.
4024 - Add support for Darwin/MacOS X
4026 - Install omshell (including new documentation).
4028 - Support DNS updates in the client (this is a very obscure feature
4029 that most DHCP client users probably will not be able to use).
4031 - Somewhat cleaner status logging in the client.
4033 - Make OMAPI key naming syntax compatible with the way keys are
4034 actually named (key names are domain names).
4036 - Fix a bug in the lease file writer.
4038 - Install DHCP ISC headers in a different place than BIND 9 ISC
4039 headers, to avoid causing trouble in BIND 9 builds.
4041 - Don't send updates for attributes on an object when the attributes
4042 haven't changed. Support deleting attributes on remote objects.
4044 - Fix a number of bugs in omshell, and add the unset and refresh
4047 - Handle disconnects in OMAPI a little bit more intelligently (so that
4048 the caller gets ECONNRESET instead of EINVAL).
4050 - Fix a bunch of bugs in the handling of clients that have existing
4051 leases when the try to renew their leases while failover is
4054 Changes since 3.0 Release Candidate 6
4056 - Fix a core dump that could happen when processing a DHCPREQUEST from
4057 a client that had a host declaration that contained both a
4058 fixed-address declaration and a dhcp-client-identifier option
4059 declaration, if the client identifier was longer than nine bytes.
4061 - Fix a memory leak that could happen in certain obscure cases when
4062 using omapi to manipulate leases.
4064 - Fix some bugs and omissions in omshell.
4066 Changes since 3.0 Release Candidate 5
4068 - Fix a bug in omapi_object_dereference that prevented objects in
4069 chains from having their reference counts decreased on dereference.
4071 - Fix a bug in omapi_object_dereference that would prevent object
4072 chains from being freed upon removal of the last reference external
4075 - Fix a number of other memory leaks in the OMAPI protocol subsystem.
4077 - Add code in the OMAPI protocol handler to trace memory leakage.
4079 - Clean up the memory allocation/reference history printer.
4081 - Support input of dotted quads and colon-separated hex lists as
4082 attribute values in omshell.
4084 - Fix a typo in the Linux interface discovery code.
4086 - Conditionalize a piece of trace code that wasn't conditional.
4088 Changes since 3.0 Release Candidate 4
4090 - Fix a bug that would prevent leases from being abandoned properly on
4093 - Fix failover peer OMAPI support.
4095 - In failover, correctly handle expiration of leases. Previously,
4096 leases would never be reclaimed because they couldn't make the
4097 transition from EXPIRED to FREE.
4099 - Fix some broken failover state transitions.
4101 - Documentation fixes.
4103 - Take out an unnecessary check in DHCP relay agent information option
4104 stashing code that was preventing REBINDING clients from rebinding.
4106 - Prevent failover peers from allocating leases in DHCPREQUEST
4107 processing if the lease belongs to the other server.
4109 - Record server version in lease file introductory comment.
4111 - Correctly report connection errors in OMAPI and failover.
4113 - Make authentication signature algorithm name comparisons in OMAPI
4116 - Fix compile problem on SunOS 4.x
4118 - If a signature algorithm is not terminated with '.', terminate it so
4119 that comparisons between fully-qualified names will work
4122 - Different SIOCGIFCONF probe code, may "fix" problem on some Linux
4123 systems with the probe not working correctly.
4125 - Don't allow user to type omapi key on command line of omshell.
4127 Changes since 3.0 Release Candidate 3
4129 - Do lease billing on startup in a way that I *think* will finally do
4130 the billing correctly - the previous method could overbill as a
4131 result of duplicate leases.
4133 - Document OMAPI server objects.
4135 Changes since 3.0 Release Candidate 2 Patchlevel 1
4137 - Fix some problems in the DDNS update code. Thanks to Albert
4138 Herranz for figuring out the main problem.
4140 - Fix some reference counting errors on host entries that were causing
4143 - Fix a byte-swap bug in the token ring code, thanks to Jochen
4146 - Fix a bug in lease billing, thanks to Jonas Bulow.
4148 Changes since 3.0 Release Candidate 2
4150 - Change the conditions under which a DHCPRELEASE is actually
4151 committed to be consistent with lease binding states rather than
4152 using the lease end time. This may fix some problems with the
4155 - Fix a bug where lease updates would fail on Digital Unix (and maybe
4156 others) because malloc was called with a size of zero.
4158 - Fix a core dump that happens when the DHCP server can't create its
4161 Changes since 3.0 Release Candidate 1 Patchlevel 1
4163 - Fix the dhcp_failover_put_message to not attempt to allocate a
4164 zero-length buffer. Some versions of malloc() fail if you try to
4165 allocate a zero-length buffer, and this was causing problems on,
4168 - Fix a case where the failover code was printing an error message
4169 when no error had occurred.
4171 - Fix a problem where when a server went down and back up again, the
4172 peer would not see a state transition and so would stay in the
4173 non-communicating state.
4175 - Be smart about going into recover_wait.
4177 - Fix a problem in the failover implementation where peers would fail
4178 to come into sync if interrupted in the RECOVER state. This could
4179 have been the cause of some problems people have reported recently.
4181 - Fix a problem with billing classes where they would not be unbilled
4182 when the client lease expired.
4184 - If select fails, figure out which descriptor is bad, and cut it out
4185 of the I/O loop. This prevents a potentially nasty spin. I
4186 haven't heard any report it in a while, but it came up consistently
4189 - Fix a bug in the relay agent where if you specified interfaces on
4190 the command line, it would fail.
4192 - Fix a couple of small bugs in the omapi connection object (no known
4195 - Add the missing 3.0 Beta 1 lease conversion script.
4197 - Read dhcp client script hooks if they exist, rather than only if
4200 Changes since 3.0 Release Candidate 1
4202 - Fix a memory smash that happens when fixed-address leases are used.
4203 ANY SITE AT WHICH FIXED-ADDRESS STATEMENTS ARE BEING USED SHOULD
4204 UPGRADE IMMEDIATELY. This has been a long-standing bug - thanks to
4205 Alvise Nobile for discovering it and helping me to find it!
4207 - Fix a small bug in binary-to-ascii, thanks to H. Peter Anvin of
4210 - There is a known problem with the DHCP server doing failover on
4211 Compaq Alpha systems. This patchlevel is not a release candidate
4212 because of this bug. The bug should be straightforward to fix, so
4213 a new release candidate is expected shortly.
4215 - There is a known problem in the DDNS update code that is probably a
4216 bug, and is not, as far as we know, fixed in this patchlevel.
4218 Changes since 3.0 Beta 2 Patchlevel 24
4220 - Went over problematic failover state transitions and made them all
4221 work, so that failover should now much less fragile.
4223 - Add some dhcpctl and omapi documentation
4225 - Fix compile errors when compiling with unusual predefines.
4227 - Make Token Ring work on Linux 2.4
4229 - Fix the Digital Unix BPF_WORDALIGN bug.
4231 - Fix some dhcp client documentation errors.
4233 - Update some parts of the README file.
4235 - Support GCC on SCO.
4237 Changes since 3.0 Beta 2 Patchlevel 23
4239 - Fix a bug in the DNS update code where a status code was not being
4240 checked. This may have been causing core dumps.
4242 - When parsing the lease file, if a lease declaration includes a
4243 billing class statement, and the lease already has a billing class,
4244 unbill the old class.
4246 - When processing failover transactions, where acks will be deferred,
4247 process the state transition immediately.
4249 - Don't try to use the new SIOCGIFCONF buffer size detection code on
4250 Linux 2.0, which doesn't provide this functionality.
4252 - Apply a patch suggested by Tuan Uong for a problem in dlpi.c.
4254 - Fix a problem in using the which command in the configure script.
4256 - Fix a parse error in the client when setting up an omapi listener.
4258 - Document the -n and -g flags to the client.
4260 - Make sure there is always a stdin and stdout on startup. This
4261 prevents shell scripts from accidentally writing error messages into
4262 configuration files that happen to be opened as stderr.
4264 - If an interface is removed, the client will now notice that it is
4265 gone rather than spinning. This has only been tested on NetBSD.
4267 - The client will attempt to get an address even if it can't create a
4270 - Don't overwrite tracefiles.
4272 - Fix some memory allocation bugs in failover.
4274 Changes since 3.0 Beta 2 Patchlevel 22
4276 - Apply some patches suggested by Cyrille Lefevre, who is maintaining
4277 the FreeBSD ISC DHCP Distribution port.
4279 - Fix a core dump in DHCPRELEASE.
4281 Changes since 3.0 Beta 2 Patchlevel 21
4283 - This time for sure: fix the spin described in the changes for pl20.
4285 Changes since 3.0 Beta 2 Patchlevel 20
4287 - Fix a problem with Linux detecting large numbers of interfaces (Ben)
4289 - Fix a memory smash in the quotify code, which was introduced in
4292 - Actually fix the spin described in the changes for pl20. The
4293 previous fix only partially fixed the problem - enough to get it
4294 past the regression test.
4296 Changes since 3.0 Beta 2 Patchlevel 19
4298 - Fix a bug that could cause the server to abort if compiled with
4299 POINTER_DEBUG enabled.
4301 - Fix a bug that could cause the server to spin when responding to a
4304 - Apply Joost Mulders' suggested patches for DLPI on x86.
4306 - Support NUL characters in quoted strings.
4308 - Install unformatted man pages on SunOS.
4310 Changes since 3.0 Beta 2 Patchlevel 18
4312 - Allow the server to be placed in partner-down state using OMAPI.
4315 - Implement omshell, which can be used to do arbitrary things to the
4316 server (in theory). (Damien Neil)
4318 - Fix a case where if a client had two different leases the server could
4319 actually dereference the second one when it hadn't been referenced,
4320 leading to memory corruption and a core dump. (James Brister)
4322 - Fix a case where a client could request the address of another client's
4323 lease, but find_lease wouldn't detect that the other client had it, and
4324 would attempt to allocate it to the client, resulting in a lease conflict
4327 - Fix a case where a client with more than one client identifier could be
4328 given a lease where the hardware address was correct but the client
4329 identifier was not, resulting in a lease conflict message.
4331 - Fix a problem where the server could write out a colon-separated
4332 hex list as a value for a variable, which would then not parse.
4333 The fix is to always write strings as quoted strings, with any
4334 non-printable characters quoted as octal escape sequences. So
4335 a file written the old way still won't work, but new files written
4338 - Fix documentation for sending non-standard options.
4340 - Use unparsable names for unknown options. WARNING: this will
4341 break any configuration files that use the option-nnn convention.
4342 If you want to continue to use this convention for some options,
4343 please be sure to write a definition, like this:
4345 option option-nnn code nnn = string;
4347 You can use a descriptive name instead of option-nnn if you like.
4349 - Fix a problem where we would see a DHCPDISCOVER/DHCPOFFER/
4350 DHCPREQUEST/DHCPACK/DHCPREQUEST/DHCPNAK sequence. This was the
4351 result of a deceptively silly bug in supersede_lease.
4353 - Fix client script exit status check, according to a fix supplied by
4356 - Fix an endianness bug in the tracefile support, regarding ICMP
4359 - Fix a bug in the client where the medium would not work correctly if
4360 it contained quoted strings.
4362 ** there was no pl17 **
4364 Changes since 3.0 Beta 2 Patchlevel 16
4366 - Add support for transaction tracing. This allows the state of the
4367 DHCP server on startup, and all the subsequent transactions, to be
4368 recorded in a file which can then be played back to reproduce the
4369 behaviour of the DHCP server. This can be used to quickly
4370 reproduce bugs that cause core dumps or corruption, and also for
4371 tracking down memory leaks.
4373 - Incorporate some bug fixes provided by Joost Mulders for the DLPI
4374 package which should clear up problems people have been seeing on
4377 - Fix bugs in the handling of options stored as linked lists (agent
4378 options, fqdn options and nwip options) that could cause memory
4379 corruption and core dumps.
4381 - Fix a bug in DHCPREQUEST handling that resulted in DHCPNAK messages
4382 not being send in some cases when they were needed.
4384 - Make the lease structure somewhat more compact.
4386 - Make initial failover startup *much* faster. This was researched
4387 and implemented by Damien Neil.
4389 - Add a --version flag to all executables, which prints the program
4390 name and version to standard output.
4392 - Don't rewrite the lease file every thousand leases.
4394 - A bug in nit.c for older SunOS machines was fixed by a patch sent in
4395 by Takeshi Hagiwara.
4397 - Fix a memory corruption bug in the DHCP client.
4399 - Lots of documentation updates.
4401 - Add a feature allowing environment variables to be passed to the
4402 DHCP client script on the DHCP client command line.
4404 - Fix client medium support, which had been broken for some time.
4406 - Fix a bug in the DHCP client initial startup backoff interval, which
4407 would cause two DHCPDISCOVERS to be sent back-to-back on startup.
4409 Changes since 3.0 Beta 2 Patchlevel 15
4411 - Some documentation tweaks.
4413 - Maybe fix a problem in the DLPI code.
4415 - Fix some error code space inconsistencies in ddns update code.
4417 - Support relay agents that intercept unicast DHCP messages to stuff
4418 agent options into them.
4420 - Fix a small memory leak in the relay agent option support code.
4422 - Fix a core dump that would occur if a packet was sent with no
4425 Changes since 3.0 Beta 2 Patchlevel 14
4427 - Finish fixing a long-standing bug in the agent options code. This
4428 was causing core dumps and failing to operate correctly - in
4429 particular, agent option stashing wasn't working. Agent option
4430 stashing should now be working, meaning that agent options can be
4431 used in class statements to control address allocation.
4433 - Fix up documentation.
4435 - Fix a couple of small memory leaks that would have added up
4436 significantly in a high-demand situation.
4438 - Add a log-facility configuration parameter.
4440 - Fix a compile error on some older operating systems.
4442 - Add the ability in the client to execute certain statements before
4443 transmitting packets to the server. Handy for debugging; not much
4444 practical use otherwise.
4446 - Don't send faked-out giaddr when renewing or bound - again, useful
4449 Changes since 3.0 Beta 2 Patchlevel 13
4451 - Fixed a problem where the fqdn decoder would sometimes try to store
4452 an option with an (unsigned) negative length, resulting in a core
4453 dump on some systems.
4455 - Work around the Win98 DHCP client, which NUL-terminates the FQDN
4458 - Work around Win98 and Win2k clients that will claim they want to do
4459 the update even when they don't have any way to do it.
4461 - Fix some log messages that can be printed when failover is operating
4462 that were not printing enough information.
4464 - It was possible for a DHCPDISCOVER to get an allocation even when
4465 the state machine said the server shouldn't be responding.
4467 - Don't load balance DHCPREQUESTs from clients in RENEWING and
4468 REBINDING, since in RENEWING, if we heard it, it's for us, and in
4469 REBINDING, the client wouldn't have got to REBINDING if its primary
4472 - When we get a bogus state lease binding state transition, don't do
4476 Changes since 3.0 Beta 2 Patchlevel 12
4478 - Fixed a couple of silly compile errors.
4480 Changes since 3.0 Beta 2 Patchlevel 11
4482 - Albert Herranz tracked down and fixed a subtle bug in the base64
4483 decoder that would prevent any key with an 'x' in its base64
4484 representation from working correctly.
4486 - Thanks to Chris Cheney and Michael Sanders, we have a fix for the
4487 hang that they both spotted in the DHCP server - when
4488 one-lease-per-client was set, the code to release the "other" lease
4491 - Fix a problem with alignment of the input buffer in bpf in cases
4492 where two packets arrive in the same bpf read.
4494 - Fix a problem where the relay agent would crash if you specified an
4495 interface name on the command line.
4497 - Add the ability to conditionalize client behaviour based on the
4500 - Add support for the FQDN option, and added support for a new way of
4501 doing ddns updates (ddns update style interim) that allows more than
4502 one DHCP server to update the DNS for the same network(s). This
4503 was implemented by Damien Neil with some additional functionality
4506 - Damien added a "log" statement, so that the configuration file can
4507 be made to log debugging information and other information.
4509 - Fixed a bug that caused option buffers not to be terminated with an
4512 - Fixed a long-standing bug in the support for option spaces where the
4513 options are stored as an ordered list rather than in a hash table,
4514 which could theoretically result in memory pool corruption.
4516 - Prevent hardware declarations with no actual hardware address from
4517 being written as something unparsable, and behave correctly in the
4518 face of a null hardware address on input.
4520 - Allow key names to be FQDNs, and qualify the algorithm name if it is
4521 specified unqualified.
4523 - Modify the DDNS update code so that it never prints the "resolver
4524 failed" message, but instead says *why* the resolver failed.
4526 - Officially support the subnet selection option, which now has an
4529 - Fix a build bug on MacOS X.
4531 - Allow administrator to disable ping checking.
4533 - Clean up dhcpd.conf documentation and add more information about how
4536 Changes since 3.0 Beta 2 Patchlevel 10
4538 - Fix a bug introduced during debugging (!) and accidentally committed
4541 Changes since 3.0 Beta 2 Patchlevel 9
4543 - Fix DHCP client handling of vendor encapsulated options.
4545 - Fix a bug in the handling of relay agent information options introduced
4548 - Stash agent options on client leases by default, and use the stashed
4549 options at renewal time.
4551 - Add the ability to test the client's binding state in the client
4552 configuration language.
4554 - Fix a core dump in the DNS update code.
4556 - Fix some expression evaluation bugs that were causing updates to be
4557 done when no client hostname was received.
4559 - Fix expression evaluation debugging printfs.
4561 - Teach pretty_print_option to print options in option spaces other than
4562 the DHCP option space.
4564 - Add a warning message if the RHS of a not is not boolean.
4566 - Never select for more than a day, because some implementations of
4567 select will just fail if the timeout is too long (!).
4569 - Fix a case where a DHCPDISCOVER from an unknown network would be
4572 - Fix a bug where if a client requested an IP address for which a different
4573 client had the lease, the DHCP server would reallocate it anyway.
4575 - Fix the DNS update code so that if the client changes its name, the DNS
4576 will be correctly updated.
4578 Changes since 3.0 Beta 2 Patchlevel 8
4580 - Oops, there was another subtle math error in the header-length
4583 Changes since 3.0 Beta 2 Patchlevel 7
4585 - Oops, forgot to byte-swap udp header length before bounds-checking it.
4587 Changes since 3.0 Beta 2 Patchlevel 6
4589 - Fix a possible DoS attack where a client could cause the checksummer
4590 to dump core. This was a read, not a write, so it shouldn't be
4591 possible to exploit it any further than that.
4593 - Implement client- and server-side support for using the Client FQDN
4596 - Support for other option spaces in the client has been added. This
4597 means that it is now possible to define a vendor option space on the
4598 client, request options in that space from the server (which must
4599 define the same option space), and then use those options in the
4600 client. This also allows NWIP and Client FQDN options to be used
4603 - Add object initializer support. This means that objects can now be
4604 initialized to something other than all-zeros when allocated, which
4605 makes, e.g., the interface object support code a little more robust.
4607 - Fix an off-by-one bug in the host stuffer. This was causing host
4608 deletes not the work, and may also have been causing OMAPI
4609 connections to get dropped. Thanks to James Brister for tracking
4612 - Fixed a core dump in the interface discovery code that is triggered
4613 when there is no subnet declaration for an interface, but the server
4614 decides to continue running. Thanks to Shane Kerr for tracking
4615 down and fixing this problem.
4617 Changes since 3.0 Beta 2 Patchlevel 5
4619 - Fix a bug in the recent enhancement to the interface discovery code
4620 to support arbitrary-length interface lists.
4622 - Support NUL-terminated DHCP options when initializing client-script
4625 - Fix suffix operator.
4627 - Fix NetWare/IP option parsing.
4629 - Better error/status checking in dhcpctl initialization and omapi
4632 - Fix a potential memory smash in dhcpctl code.
4634 - Fix SunOS4 and (maybe) Ultrix builds.
4636 - Fix a bug where a certain sort of incoming packet could cause a core
4637 dump on Solaris (and probably elsewhere).
4639 - Add some more safety checks in error logging code.
4641 - Add support for ISC_R_INCOMPLETE in OMAPI protocol connection code.
4643 - Fix relay agent so that if an interface is specified on the command
4644 line, the relay agent does not dump core.
4646 - Fix class matching so that match if can be combined with match or
4649 - Do not allow spurious leases in the lease database to introduce
4650 potentially bogus leases into the in-memory database.
4652 - Fix a byte-order problem in the client hardware address type code
4655 - Be slightly less picky about what sort of hardware addresses OMAPI
4656 can install in host declarations.
4658 Changes since 3.0 Beta 2 Patchlevel 4
4660 - Incorporated Peter Marschall's proposed change to array/record
4661 parsing, which allows things like the slp-agent option to be encoded
4662 correctly. Thanks very much to Peter for taking the initiative to
4663 do this, and for doing such a careful job of it (e.g., updating the
4666 - Added an encoding for the slp-agent option. :')
4668 - Fixed SunOS 4 build. Thanks to Robert Elz for responding to my
4669 request for help on this with patches!
4671 - Incorporated a change that should fix a problem reported by Philippe
4672 Jumelle where when the network connection between two servers is
4673 lost, they never reconnect.
4675 - Fix client script files other than that for NetBSD to actually use
4676 make_resolv_conf as documented in the manual page.
4678 - Fix a bug in the packet handling code that could result in a core
4681 - Fix a bug in the bootp code where responses on the local net would
4682 be sent to the wrong MAC address. Thanks to Jerry Schave for
4685 Changes since 3.0 Beta 2 Patchlevel 3
4687 - In the DHCP client, execute client statements prior to using the values
4688 of options, so that the client configuration can overridden, e.g., the
4691 - Fix a reference counting error that would result in very reproducible
4692 failures in updates, as well as occasional core dumps, if a zone was
4693 declared without a key.
4695 - Fix some Linux 2.0 compilation problems.
4697 - Fix a bug in scope evaluation during execution of "on" statements that
4698 caused values not to be recorded on leases.
4700 - If the dhcp-max-message-size option is specified in scope, and the
4701 client didn't send this option, use the one specified in scope to
4702 determine the maximum size of the response.
4704 Changes since 3.0 Beta 2 Patchlevel 2
4706 - Fix a case where spawning subclasses were being allocated
4707 incorrectly, resulting in a core dump.
4709 - Fix a case where the DHCP server might inappropriately NAK a
4712 - Fix a place dhcprequest() where static leases could leak.
4714 - Include memory.h in omapip_p.h so that we don't get warnings about
4717 Changes since 3.0 Beta 2 Patchlevel 1
4719 - Notice when SIOCFIGCONF returns more data than fit in the buffer -
4720 allocate a larger buffer, and retry. Thanks to Greg Fausak for
4723 - In the server, if no interfaces were configured, report an error and
4726 - Don't ever record a state of 'startup'.
4728 - Don't try to evaluate the local failover binding address if none was
4729 specified. Thanks to Joseph Breu for finding this.
projects / thirdparty / dhcp.git / blob