arch/Kconfig.nxp

   1 config NXP_ESBC
   2         bool "NXP ESBC (secure boot) functionality"
   3         help
   4           Enable Freescale Secure Boot feature. Normally selected by defconfig.
   5           If unsure, do not change.
   6
   7 menu "Chain of trust / secure boot options"
   8         depends on !FIT_SIGNATURE && NXP_ESBC
   9
  10 config CHAIN_OF_TRUST
  11         select FSL_CAAM
  12         select ARCH_MISC_INIT
  13         select FSL_SEC_MON
  14         select SPL_BOARD_INIT if (ARM && SPL)
  15         select SPL_HASH if (ARM && SPL)
  16         select SHA_HW_ACCEL
  17         select SHA_PROG_HW_ACCEL
  18         select ENV_IS_NOWHERE
  19         select CMD_EXT4 if ARM
  20         select CMD_EXT4_WRITE if ARM
  21         imply CMD_BLOB
  22         imply CMD_HASH if ARM
  23         def_bool y
  24
  25 config CMD_ESBC_VALIDATE
  26         bool "Enable the 'esbc_validate' and 'esbc_halt' commands"
  27         default y
  28         help
  29           This option enables two commands used for secure booting:
  30
  31             esbc_validate - validate signature using RSA verification
  32             esbc_halt - put the core in spin loop (Secure Boot Only)
  33
  34 config ESBC_HDR_LS
  35         bool
  36
  37 config ESBC_ADDR_64BIT
  38         def_bool y
  39         depends on ESBC_HDR_LS && FSL_LAYERSCAPE
  40         help
  41           For Layerscape based platforms, ESBC image Address in Header is 64bit.
  42
  43 config SYS_FSL_SFP_BE
  44         def_bool y
  45         depends on PPC || FSL_LSCH2 || ARCH_LS1021A
  46
  47 config SYS_FSL_SFP_LE
  48         def_bool y
  49         depends on !SYS_FSL_SFP_BE
  50
  51 choice
  52         prompt "SFP IP revision"
  53         default SYS_FSL_SFP_VER_3_0 if PPC
  54         default SYS_FSL_SFP_VER_3_4
  55
  56 config SYS_FSL_SFP_VER_3_0
  57         bool "SFP version 3.0"
  58
  59 config SYS_FSL_SFP_VER_3_2
  60         bool "SFP version 3.2"
  61
  62 config SYS_FSL_SFP_VER_3_4
  63         bool "SFP version 3.4"
  64
  65 endchoice
  66
  67 config SPL_UBOOT_KEY_HASH
  68         string "Non-SRK key hash for U-Boot public/private key pair"
  69         depends on SPL
  70         default ""
  71         help
  72           Set the key hash for U-Boot here if public/private key pair used to
  73           sign U-boot are different from the SRK hash put in the fuse.  Example
  74           of a key hash is
  75           41066b564c6ffcef40ccbc1e0a5d0d519604000c785d97bbefd25e4d288d1c8b.
  76           Otherwise leave this empty.
  77
  78 if PPC
  79
  80 config BOOTSCRIPT_COPY_RAM
  81         bool "Secure boot copies boot script to RAM"
  82         help
  83           On systems that support chain of trust booting, a number of addresses
  84           are required to set variables that are used in the copying and then
  85           verification of different parts of the system.  If enabled, the subsequent
  86           options are for what location to use in each step.
  87
  88 config BS_ADDR_DEVICE
  89         hex "Address in RAM for bs_device"
  90         depends on BOOTSCRIPT_COPY_RAM
  91
  92 config BS_SIZE
  93         hex "The size of bs_size which is the amount read from bs_device"
  94         depends on BOOTSCRIPT_COPY_RAM
  95
  96 config BS_ADDR_RAM
  97         hex "Address in RAM for bs_ram"
  98         depends on BOOTSCRIPT_COPY_RAM
  99
 100 config BS_HDR_ADDR_DEVICE
 101         hex "Address in RAM for bs_hdr_device"
 102         depends on BOOTSCRIPT_COPY_RAM
 103
 104 config BS_HDR_SIZE
 105         hex "The size of bs_hdr_size which is the amount read from bs_hdr_device"
 106         depends on BOOTSCRIPT_COPY_RAM
 107
 108 config BS_HDR_ADDR_RAM
 109         hex "Address in RAM for bs_hdr_ram"
 110         depends on BOOTSCRIPT_COPY_RAM
 111
 112 config BOOTSCRIPT_HDR_ADDR
 113         hex "CONFIG_BOOTSCRIPT_HDR_ADDR"
 114         default BS_ADDR_RAM if BOOTSCRIPT_COPY_RAM
 115
 116 endif
 117
 118 config SYS_FSL_SRK_LE
 119         def_bool y
 120         depends on ARM
 121
 122 config KEY_REVOCATION
 123         def_bool y
 124
 125 endmenu
 126
 127 comment "Other functionality shared between NXP SoCs"
 128
 129 config DEEP_SLEEP
 130         bool "Enable SoC deep sleep feature"
 131         depends on ARCH_T1024 || ARCH_T1040 || ARCH_T1042 || ARCH_LS1021A
 132         default y
 133         help
 134           Indicates this SoC supports deep sleep feature. If deep sleep is
 135           supported, core will start to execute uboot when wakes up.
 136
 137 config LAYERSCAPE_NS_ACCESS
 138         bool "Layerscape non-secure access support"
 139         depends on ARCH_LS1021A || FSL_LSCH2
 140
 141 config PCIE1
 142         bool "PCIe controller #1"
 143         depends on LAYERSCAPE_NS_ACCESS || PPC
 144
 145 config PCIE2
 146         bool "PCIe controller #2"
 147         depends on LAYERSCAPE_NS_ACCESS || PPC
 148
 149 config PCIE3
 150         bool "PCIe controller #3"
 151         depends on LAYERSCAPE_NS_ACCESS || PPC
 152
 153 config PCIE4
 154         bool "PCIe controller #4"
 155         depends on LAYERSCAPE_NS_ACCESS || PPC
 156
 157 config FSL_USE_PCA9547_MUX
 158         bool "Enable PCA9547 I2C Mux on Freescale boards"
 159         depends on PPC || ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3
 160         help
 161          This option enables the PCA9547 I2C mux on Freescale boards.
 162
 163 config VID
 164         bool "Enable Freescale VID"
 165         depends on (PPC || ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3) && (I2C || DM_I2C)
 166         help
 167          This option enables setting core voltage based on individual
 168          values saved in SoC fuses.
 169
 170 config SPL_VID
 171         bool "Enable Freescale VID in SPL"
 172         depends on (PPC || ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3) && (SPL_I2C || DM_SPL_I2C)
 173         help
 174          This option enables setting core voltage based on individual
 175          values saved in SoC fuses, in SPL.
 176
 177 if VID || SPL_VID
 178
 179 config VID_FLS_ENV
 180         string "Environment variable for overriding VDD"
 181         help
 182           This option allows for specifying the environment variable
 183           to check to override VDD information.
 184
 185 config VOL_MONITOR_INA220
 186         bool "Enable the INA220 voltage monitor read"
 187         help
 188           This option enables INA220 voltage monitor read
 189           functionality. It is used by the common VID driver.
 190
 191 config VOL_MONITOR_IR36021_READ
 192         bool "Enable the IR36021 voltage monitor read"
 193         help
 194          This option enables IR36021 voltage monitor read
 195          functionality. It is used by the common VID driver.
 196
 197 config VOL_MONITOR_IR36021_SET
 198         bool "Enable the IR36021 voltage monitor set"
 199         help
 200          This option enables IR36021 voltage monitor set
 201          functionality. It is used by the common VID driver.
 202
 203 config VOL_MONITOR_LTC3882_READ
 204         bool "Enable the LTC3882 voltage monitor read"
 205         help
 206          This option enables LTC3882 voltage monitor read
 207          functionality. It is used by the common VID driver.
 208
 209 config VOL_MONITOR_LTC3882_SET
 210         bool "Enable the LTC3882 voltage monitor set"
 211         help
 212          This option enables LTC3882 voltage monitor set
 213          functionality. It is used by the common VID driver.
 214
 215 config VOL_MONITOR_ISL68233_READ
 216         bool "Enable the ISL68233 voltage monitor read"
 217         help
 218          This option enables ISL68233 voltage monitor read
 219          functionality. It is used by the common VID driver.
 220
 221 config VOL_MONITOR_ISL68233_SET
 222         bool "Enable the ISL68233 voltage monitor set"
 223         help
 224          This option enables ISL68233 voltage monitor set
 225          functionality. It is used by the common VID driver.
 226
 227 endif
 228
 229 config FSL_QIXIS
 230         bool "Enable QIXIS support"
 231         depends on PPC || ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3
 232
 233 config QIXIS_I2C_ACCESS
 234         bool "Access to QIXIS is over i2c"
 235         depends on FSL_QIXIS
 236         default y
 237
 238 config HAS_FSL_DR_USB
 239         def_bool y
 240         depends on USB_EHCI_HCD && PPC