arch/arm/boot/dts/kirkwood-ts219.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 / {
   3         model = "QNAP TS219 family";
   4         compatible = "qnap,ts219", "marvell,kirkwood";
   5
   6         memory {
   7                 device_type = "memory";
   8                 reg = <0x00000000 0x20000000>;
   9         };
  10
  11         chosen {
  12                 bootargs = "console=ttyS0,115200n8";
  13                 stdout-path = &uart0;
  14         };
  15
  16         ocp@f1000000 {
  17                 i2c@11000 {
  18                         status = "okay";
  19                         clock-frequency = <400000>;
  20
  21                         s35390a: s35390a@30 {
  22                                 compatible = "s35390a";
  23                                 reg = <0x30>;
  24                         };
  25                 };
  26                 serial@12000 {
  27                         status = "okay";
  28                 };
  29                 serial@12100 {
  30                         status = "okay";
  31                 };
  32                 poweroff@12100 {
  33                         compatible = "qnap,power-off";
  34                         reg = <0x12100 0x100>;
  35                         clocks = <&gate_clk 7>;
  36                 };
  37                 spi@10600 {
  38                         status = "okay";
  39
  40                         m25p128@0 {
  41                                 #address-cells = <1>;
  42                                 #size-cells = <1>;
  43                                 compatible = "m25p128", "jedec,spi-nor";
  44                                 reg = <0>;
  45                                 spi-max-frequency = <20000000>;
  46                                 mode = <0>;
  47
  48                                 partition@0000000 {
  49                                         reg = <0x00000000 0x00080000>;
  50                                         label = "U-Boot";
  51                                 };
  52
  53                                 partition@00200000 {
  54                                         reg = <0x00200000 0x00200000>;
  55                                         label = "Kernel";
  56                                 };
  57
  58                                 partition@00400000 {
  59                                         reg = <0x00400000 0x00900000>;
  60                                         label = "RootFS1";
  61                                 };
  62                                 partition@00d00000 {
  63                                         reg = <0x00d00000 0x00300000>;
  64                                         label = "RootFS2";
  65                                 };
  66                                 partition@00040000 {
  67                                         reg = <0x00080000 0x00040000>;
  68                                         label = "U-Boot Config";
  69                                 };
  70                                 partition@000c0000 {
  71                                         reg = <0x000c0000 0x00140000>;
  72                                         label = "NAS Config";
  73                                 };
  74                         };
  75                 };
  76                 sata@80000 {
  77                         pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
  78                         pinctrl-names = "default";
  79                         status = "okay";
  80                         nr-ports = <2>;
  81                 };
  82         };
  83 };
  84
  85 &mdio {
  86         status = "okay";
  87
  88         ethphy0: ethernet-phy@X {
  89                 /* overwrite reg property in board file */
  90         };
  91 };
  92
  93 &eth0 {
  94         status = "okay";
  95         ethernet0-port@0 {
  96                 phy-handle = <&ethphy0>;
  97         };
  98 };
  99
 100 &pciec {
 101         status = "okay";
 102 };
 103
 104 &pcie0 {
 105         status = "okay";
 106 };