arch/arm/boot/dts/qcom-ipq4019.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (c) 2015, The Linux Foundation. All rights reserved.
   4  */
   5
   6 /dts-v1/;
   7
   8 #include <dt-bindings/clock/qcom,gcc-ipq4019.h>
   9 #include <dt-bindings/interrupt-controller/arm-gic.h>
  10 #include <dt-bindings/interrupt-controller/irq.h>
  11
  12 / {
  13         #address-cells = <1>;
  14         #size-cells = <1>;
  15
  16         model = "Qualcomm Technologies, Inc. IPQ4019";
  17         compatible = "qcom,ipq4019";
  18         interrupt-parent = <&intc>;
  19
  20         reserved-memory {
  21                 #address-cells = <0x1>;
  22                 #size-cells = <0x1>;
  23                 ranges;
  24
  25                 smem_region: smem@87e00000 {
  26                         reg = <0x87e00000 0x080000>;
  27                         no-map;
  28                 };
  29
  30                 tz@87e80000 {
  31                         reg = <0x87e80000 0x180000>;
  32                         no-map;
  33                 };
  34         };
  35
  36         aliases {
  37                 spi0 = &blsp1_spi1;
  38                 spi1 = &blsp1_spi2;
  39                 i2c0 = &blsp1_i2c3;
  40                 i2c1 = &blsp1_i2c4;
  41         };
  42
  43         cpus {
  44                 #address-cells = <1>;
  45                 #size-cells = <0>;
  46                 cpu@0 {
  47                         device_type = "cpu";
  48                         compatible = "arm,cortex-a7";
  49                         enable-method = "qcom,kpss-acc-v2";
  50                         next-level-cache = <&L2>;
  51                         qcom,acc = <&acc0>;
  52                         qcom,saw = <&saw0>;
  53                         reg = <0x0>;
  54                         clocks = <&gcc GCC_APPS_CLK_SRC>;
  55                         clock-frequency = <0>;
  56                         clock-latency = <256000>;
  57                         operating-points-v2 = <&cpu0_opp_table>;
  58                 };
  59
  60                 cpu@1 {
  61                         device_type = "cpu";
  62                         compatible = "arm,cortex-a7";
  63                         enable-method = "qcom,kpss-acc-v2";
  64                         next-level-cache = <&L2>;
  65                         qcom,acc = <&acc1>;
  66                         qcom,saw = <&saw1>;
  67                         reg = <0x1>;
  68                         clocks = <&gcc GCC_APPS_CLK_SRC>;
  69                         clock-frequency = <0>;
  70                         clock-latency = <256000>;
  71                         operating-points-v2 = <&cpu0_opp_table>;
  72                 };
  73
  74                 cpu@2 {
  75                         device_type = "cpu";
  76                         compatible = "arm,cortex-a7";
  77                         enable-method = "qcom,kpss-acc-v2";
  78                         next-level-cache = <&L2>;
  79                         qcom,acc = <&acc2>;
  80                         qcom,saw = <&saw2>;
  81                         reg = <0x2>;
  82                         clocks = <&gcc GCC_APPS_CLK_SRC>;
  83                         clock-frequency = <0>;
  84                         clock-latency = <256000>;
  85                         operating-points-v2 = <&cpu0_opp_table>;
  86                 };
  87
  88                 cpu@3 {
  89                         device_type = "cpu";
  90                         compatible = "arm,cortex-a7";
  91                         enable-method = "qcom,kpss-acc-v2";
  92                         next-level-cache = <&L2>;
  93                         qcom,acc = <&acc3>;
  94                         qcom,saw = <&saw3>;
  95                         reg = <0x3>;
  96                         clocks = <&gcc GCC_APPS_CLK_SRC>;
  97                         clock-frequency = <0>;
  98                         clock-latency = <256000>;
  99                         operating-points-v2 = <&cpu0_opp_table>;
 100                 };
 101
 102                 L2: l2-cache {
 103                         compatible = "cache";
 104                         cache-level = <2>;
 105                         qcom,saw = <&saw_l2>;
 106                 };
 107         };
 108
 109         cpu0_opp_table: opp_table0 {
 110                 compatible = "operating-points-v2";
 111                 opp-shared;
 112
 113                 opp-48000000 {
 114                         opp-hz = /bits/ 64 <48000000>;
 115                         clock-latency-ns = <256000>;
 116                 };
 117                 opp-200000000 {
 118                         opp-hz = /bits/ 64 <200000000>;
 119                         clock-latency-ns = <256000>;
 120                 };
 121                 opp-500000000 {
 122                         opp-hz = /bits/ 64 <500000000>;
 123                         clock-latency-ns = <256000>;
 124                 };
 125                 opp-716000000 {
 126                         opp-hz = /bits/ 64 <716000000>;
 127                         clock-latency-ns = <256000>;
 128                 };
 129         };
 130
 131         memory {
 132                 device_type = "memory";
 133                 reg = <0x0 0x0>;
 134         };
 135
 136         pmu {
 137                 compatible = "arm,cortex-a7-pmu";
 138                 interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
 139                                          IRQ_TYPE_LEVEL_HIGH)>;
 140         };
 141
 142         clocks {
 143                 sleep_clk: sleep_clk {
 144                         compatible = "fixed-clock";
 145                         clock-frequency = <32000>;
 146                         clock-output-names = "gcc_sleep_clk_src";
 147                         #clock-cells = <0>;
 148                 };
 149
 150                 xo: xo {
 151                         compatible = "fixed-clock";
 152                         clock-frequency = <48000000>;
 153                         #clock-cells = <0>;
 154                 };
 155         };
 156
 157         firmware {
 158                 scm {
 159                         compatible = "qcom,scm-ipq4019";
 160                 };
 161         };
 162
 163         timer {
 164                 compatible = "arm,armv7-timer";
 165                 interrupts = <1 2 0xf08>,
 166                              <1 3 0xf08>,
 167                              <1 4 0xf08>,
 168                              <1 1 0xf08>;
 169                 clock-frequency = <48000000>;
 170                 always-on;
 171         };
 172
 173         soc {
 174                 #address-cells = <1>;
 175                 #size-cells = <1>;
 176                 ranges;
 177                 compatible = "simple-bus";
 178
 179                 intc: interrupt-controller@b000000 {
 180                         compatible = "qcom,msm-qgic2";
 181                         interrupt-controller;
 182                         #interrupt-cells = <3>;
 183                         reg = <0x0b000000 0x1000>,
 184                         <0x0b002000 0x1000>;
 185                 };
 186
 187                 gcc: clock-controller@1800000 {
 188                         compatible = "qcom,gcc-ipq4019";
 189                         #clock-cells = <1>;
 190                         #power-domain-cells = <1>;
 191                         #reset-cells = <1>;
 192                         reg = <0x1800000 0x60000>;
 193                 };
 194
 195                 prng: rng@22000 {
 196                         compatible = "qcom,prng";
 197                         reg = <0x22000 0x140>;
 198                         clocks = <&gcc GCC_PRNG_AHB_CLK>;
 199                         clock-names = "core";
 200                         status = "disabled";
 201                 };
 202
 203                 tlmm: pinctrl@1000000 {
 204                         compatible = "qcom,ipq4019-pinctrl";
 205                         reg = <0x01000000 0x300000>;
 206                         gpio-controller;
 207                         gpio-ranges = <&tlmm 0 0 100>;
 208                         #gpio-cells = <2>;
 209                         interrupt-controller;
 210                         #interrupt-cells = <2>;
 211                         interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 212                 };
 213
 214                 vqmmc: regulator@1948000 {
 215                         compatible = "qcom,vqmmc-ipq4019-regulator";
 216                         reg = <0x01948000 0x4>;
 217                         regulator-name = "vqmmc";
 218                         regulator-min-microvolt = <1500000>;
 219                         regulator-max-microvolt = <3000000>;
 220                         regulator-always-on;
 221                         status = "disabled";
 222                 };
 223
 224                 sdhci: sdhci@7824900 {
 225                         compatible = "qcom,sdhci-msm-v4";
 226                         reg = <0x7824900 0x11c>, <0x7824000 0x800>;
 227                         interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 228                         interrupt-names = "hc_irq", "pwr_irq";
 229                         bus-width = <8>;
 230                         clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>,
 231                                  <&gcc GCC_DCD_XO_CLK>;
 232                         clock-names = "core", "iface", "xo";
 233                         status = "disabled";
 234                 };
 235
 236                 blsp_dma: dma-controller@7884000 {
 237                         compatible = "qcom,bam-v1.7.0";
 238                         reg = <0x07884000 0x23000>;
 239                         interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
 240                         clocks = <&gcc GCC_BLSP1_AHB_CLK>;
 241                         clock-names = "bam_clk";
 242                         #dma-cells = <1>;
 243                         qcom,ee = <0>;
 244                         status = "disabled";
 245                 };
 246
 247                 blsp1_spi1: spi@78b5000 { /* BLSP1 QUP1 */
 248                         compatible = "qcom,spi-qup-v2.2.1";
 249                         reg = <0x78b5000 0x600>;
 250                         interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 251                         clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
 252                                  <&gcc GCC_BLSP1_AHB_CLK>;
 253                         clock-names = "core", "iface";
 254                         #address-cells = <1>;
 255                         #size-cells = <0>;
 256                         dmas = <&blsp_dma 4>, <&blsp_dma 5>;
 257                         dma-names = "tx", "rx";
 258                         status = "disabled";
 259                 };
 260
 261                 blsp1_spi2: spi@78b6000 { /* BLSP1 QUP2 */
 262                         compatible = "qcom,spi-qup-v2.2.1";
 263                         reg = <0x78b6000 0x600>;
 264                         interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 265                         clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
 266                                 <&gcc GCC_BLSP1_AHB_CLK>;
 267                         clock-names = "core", "iface";
 268                         #address-cells = <1>;
 269                         #size-cells = <0>;
 270                         dmas = <&blsp_dma 6>, <&blsp_dma 7>;
 271                         dma-names = "tx", "rx";
 272                         status = "disabled";
 273                 };
 274
 275                 blsp1_i2c3: i2c@78b7000 { /* BLSP1 QUP3 */
 276                         compatible = "qcom,i2c-qup-v2.2.1";
 277                         reg = <0x78b7000 0x600>;
 278                         interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 279                         clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
 280                                  <&gcc GCC_BLSP1_AHB_CLK>;
 281                         clock-names = "core", "iface";
 282                         #address-cells = <1>;
 283                         #size-cells = <0>;
 284                         dmas = <&blsp_dma 8>, <&blsp_dma 9>;
 285                         dma-names = "tx", "rx";
 286                         status = "disabled";
 287                 };
 288
 289                 blsp1_i2c4: i2c@78b8000 { /* BLSP1 QUP4 */
 290                         compatible = "qcom,i2c-qup-v2.2.1";
 291                         reg = <0x78b8000 0x600>;
 292                         interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
 293                         clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
 294                                  <&gcc GCC_BLSP1_AHB_CLK>;
 295                         clock-names = "core", "iface";
 296                         #address-cells = <1>;
 297                         #size-cells = <0>;
 298                         dmas = <&blsp_dma 10>, <&blsp_dma 11>;
 299                         dma-names = "tx", "rx";
 300                         status = "disabled";
 301                 };
 302
 303                 cryptobam: dma-controller@8e04000 {
 304                         compatible = "qcom,bam-v1.7.0";
 305                         reg = <0x08e04000 0x20000>;
 306                         interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
 307                         clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
 308                         clock-names = "bam_clk";
 309                         #dma-cells = <1>;
 310                         qcom,ee = <1>;
 311                         qcom,controlled-remotely;
 312                         status = "disabled";
 313                 };
 314
 315                 crypto: crypto@8e3a000 {
 316                         compatible = "qcom,crypto-v5.1";
 317                         reg = <0x08e3a000 0x6000>;
 318                         clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
 319                                  <&gcc GCC_CRYPTO_AXI_CLK>,
 320                                  <&gcc GCC_CRYPTO_CLK>;
 321                         clock-names = "iface", "bus", "core";
 322                         dmas = <&cryptobam 2>, <&cryptobam 3>;
 323                         dma-names = "rx", "tx";
 324                         status = "disabled";
 325                 };
 326
 327                 acc0: clock-controller@b088000 {
 328                         compatible = "qcom,kpss-acc-v2";
 329                         reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
 330                 };
 331
 332                 acc1: clock-controller@b098000 {
 333                         compatible = "qcom,kpss-acc-v2";
 334                         reg = <0x0b098000 0x1000>, <0xb008000 0x1000>;
 335                 };
 336
 337                 acc2: clock-controller@b0a8000 {
 338                         compatible = "qcom,kpss-acc-v2";
 339                         reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>;
 340                 };
 341
 342                 acc3: clock-controller@b0b8000 {
 343                         compatible = "qcom,kpss-acc-v2";
 344                         reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
 345                 };
 346
 347                 saw0: regulator@b089000 {
 348                         compatible = "qcom,saw2";
 349                         reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>;
 350                         regulator;
 351                 };
 352
 353                 saw1: regulator@b099000 {
 354                         compatible = "qcom,saw2";
 355                         reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>;
 356                         regulator;
 357                 };
 358
 359                 saw2: regulator@b0a9000 {
 360                         compatible = "qcom,saw2";
 361                         reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>;
 362                         regulator;
 363                 };
 364
 365                 saw3: regulator@b0b9000 {
 366                         compatible = "qcom,saw2";
 367                         reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>;
 368                         regulator;
 369                 };
 370
 371                 saw_l2: regulator@b012000 {
 372                         compatible = "qcom,saw2";
 373                         reg = <0xb012000 0x1000>;
 374                         regulator;
 375                 };
 376
 377                 blsp1_uart1: serial@78af000 {
 378                         compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 379                         reg = <0x78af000 0x200>;
 380                         interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 381                         status = "disabled";
 382                         clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
 383                                 <&gcc GCC_BLSP1_AHB_CLK>;
 384                         clock-names = "core", "iface";
 385                         dmas = <&blsp_dma 0>, <&blsp_dma 1>;
 386                         dma-names = "tx", "rx";
 387                 };
 388
 389                 blsp1_uart2: serial@78b0000 {
 390                         compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 391                         reg = <0x78b0000 0x200>;
 392                         interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 393                         status = "disabled";
 394                         clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
 395                                 <&gcc GCC_BLSP1_AHB_CLK>;
 396                         clock-names = "core", "iface";
 397                         dmas = <&blsp_dma 2>, <&blsp_dma 3>;
 398                         dma-names = "tx", "rx";
 399                 };
 400
 401                 watchdog: watchdog@b017000 {
 402                         compatible = "qcom,kpss-wdt", "qcom,kpss-wdt-ipq4019";
 403                         reg = <0xb017000 0x40>;
 404                         clocks = <&sleep_clk>;
 405                         timeout-sec = <10>;
 406                         status = "disabled";
 407                 };
 408
 409                 restart@4ab000 {
 410                         compatible = "qcom,pshold";
 411                         reg = <0x4ab000 0x4>;
 412                 };
 413
 414                 pcie0: pci@40000000 {
 415                         compatible = "qcom,pcie-ipq4019", "snps,dw-pcie";
 416                         reg =  <0x40000000 0xf1d
 417                                 0x40000f20 0xa8
 418                                 0x80000 0x2000
 419                                 0x40100000 0x1000>;
 420                         reg-names = "dbi", "elbi", "parf", "config";
 421                         device_type = "pci";
 422                         linux,pci-domain = <0>;
 423                         bus-range = <0x00 0xff>;
 424                         num-lanes = <1>;
 425                         #address-cells = <3>;
 426                         #size-cells = <2>;
 427
 428                         ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000>,
 429                                  <0x82000000 0 0x40300000 0x40300000 0 0x00d00000>;
 430
 431                         interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 432                         interrupt-names = "msi";
 433                         #interrupt-cells = <1>;
 434                         interrupt-map-mask = <0 0 0 0x7>;
 435                         interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
 436                                         <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
 437                                         <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
 438                                         <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 439                         clocks = <&gcc GCC_PCIE_AHB_CLK>,
 440                                  <&gcc GCC_PCIE_AXI_M_CLK>,
 441                                  <&gcc GCC_PCIE_AXI_S_CLK>;
 442                         clock-names = "aux",
 443                                       "master_bus",
 444                                       "slave_bus";
 445
 446                         resets = <&gcc PCIE_AXI_M_ARES>,
 447                                  <&gcc PCIE_AXI_S_ARES>,
 448                                  <&gcc PCIE_PIPE_ARES>,
 449                                  <&gcc PCIE_AXI_M_VMIDMT_ARES>,
 450                                  <&gcc PCIE_AXI_S_XPU_ARES>,
 451                                  <&gcc PCIE_PARF_XPU_ARES>,
 452                                  <&gcc PCIE_PHY_ARES>,
 453                                  <&gcc PCIE_AXI_M_STICKY_ARES>,
 454                                  <&gcc PCIE_PIPE_STICKY_ARES>,
 455                                  <&gcc PCIE_PWR_ARES>,
 456                                  <&gcc PCIE_AHB_ARES>,
 457                                  <&gcc PCIE_PHY_AHB_ARES>;
 458                         reset-names = "axi_m",
 459                                       "axi_s",
 460                                       "pipe",
 461                                       "axi_m_vmid",
 462                                       "axi_s_xpu",
 463                                       "parf",
 464                                       "phy",
 465                                       "axi_m_sticky",
 466                                       "pipe_sticky",
 467                                       "pwr",
 468                                       "ahb",
 469                                       "phy_ahb";
 470
 471                         status = "disabled";
 472                 };
 473
 474                 qpic_bam: dma-controller@7984000 {
 475                         compatible = "qcom,bam-v1.7.0";
 476                         reg = <0x7984000 0x1a000>;
 477                         interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 478                         clocks = <&gcc GCC_QPIC_CLK>;
 479                         clock-names = "bam_clk";
 480                         #dma-cells = <1>;
 481                         qcom,ee = <0>;
 482                         status = "disabled";
 483                 };
 484
 485                 nand: nand-controller@79b0000 {
 486                         compatible = "qcom,ipq4019-nand";
 487                         reg = <0x79b0000 0x1000>;
 488                         #address-cells = <1>;
 489                         #size-cells = <0>;
 490                         clocks = <&gcc GCC_QPIC_CLK>,
 491                                  <&gcc GCC_QPIC_AHB_CLK>;
 492                         clock-names = "core", "aon";
 493
 494                         dmas = <&qpic_bam 0>,
 495                                <&qpic_bam 1>,
 496                                <&qpic_bam 2>;
 497                         dma-names = "tx", "rx", "cmd";
 498                         status = "disabled";
 499
 500                         nand@0 {
 501                                 reg = <0>;
 502
 503                                 nand-ecc-strength = <4>;
 504                                 nand-ecc-step-size = <512>;
 505                                 nand-bus-width = <8>;
 506                         };
 507                 };
 508
 509                 wifi0: wifi@a000000 {
 510                         compatible = "qcom,ipq4019-wifi";
 511                         reg = <0xa000000 0x200000>;
 512                         resets = <&gcc WIFI0_CPU_INIT_RESET>,
 513                                  <&gcc WIFI0_RADIO_SRIF_RESET>,
 514                                  <&gcc WIFI0_RADIO_WARM_RESET>,
 515                                  <&gcc WIFI0_RADIO_COLD_RESET>,
 516                                  <&gcc WIFI0_CORE_WARM_RESET>,
 517                                  <&gcc WIFI0_CORE_COLD_RESET>;
 518                         reset-names = "wifi_cpu_init", "wifi_radio_srif",
 519                                       "wifi_radio_warm", "wifi_radio_cold",
 520                                       "wifi_core_warm", "wifi_core_cold";
 521                         clocks = <&gcc GCC_WCSS2G_CLK>,
 522                                  <&gcc GCC_WCSS2G_REF_CLK>,
 523                                  <&gcc GCC_WCSS2G_RTC_CLK>;
 524                         clock-names = "wifi_wcss_cmd", "wifi_wcss_ref",
 525                                       "wifi_wcss_rtc";
 526                         interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>,
 527                                      <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>,
 528                                      <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
 529                                      <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
 530                                      <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
 531                                      <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>,
 532                                      <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>,
 533                                      <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>,
 534                                      <GIC_SPI 40 IRQ_TYPE_EDGE_RISING>,
 535                                      <GIC_SPI 41 IRQ_TYPE_EDGE_RISING>,
 536                                      <GIC_SPI 42 IRQ_TYPE_EDGE_RISING>,
 537                                      <GIC_SPI 43 IRQ_TYPE_EDGE_RISING>,
 538                                      <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
 539                                      <GIC_SPI 45 IRQ_TYPE_EDGE_RISING>,
 540                                      <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>,
 541                                      <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>,
 542                                      <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
 543                         interrupt-names =  "msi0",  "msi1",  "msi2",  "msi3",
 544                                            "msi4",  "msi5",  "msi6",  "msi7",
 545                                            "msi8",  "msi9", "msi10", "msi11",
 546                                           "msi12", "msi13", "msi14", "msi15",
 547                                           "legacy";
 548                         status = "disabled";
 549                 };
 550
 551                 wifi1: wifi@a800000 {
 552                         compatible = "qcom,ipq4019-wifi";
 553                         reg = <0xa800000 0x200000>;
 554                         resets = <&gcc WIFI1_CPU_INIT_RESET>,
 555                                  <&gcc WIFI1_RADIO_SRIF_RESET>,
 556                                  <&gcc WIFI1_RADIO_WARM_RESET>,
 557                                  <&gcc WIFI1_RADIO_COLD_RESET>,
 558                                  <&gcc WIFI1_CORE_WARM_RESET>,
 559                                  <&gcc WIFI1_CORE_COLD_RESET>;
 560                         reset-names = "wifi_cpu_init", "wifi_radio_srif",
 561                                       "wifi_radio_warm", "wifi_radio_cold",
 562                                       "wifi_core_warm", "wifi_core_cold";
 563                         clocks = <&gcc GCC_WCSS5G_CLK>,
 564                                  <&gcc GCC_WCSS5G_REF_CLK>,
 565                                  <&gcc GCC_WCSS5G_RTC_CLK>;
 566                         clock-names = "wifi_wcss_cmd", "wifi_wcss_ref",
 567                                       "wifi_wcss_rtc";
 568                         interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
 569                                      <GIC_SPI 49 IRQ_TYPE_EDGE_RISING>,
 570                                      <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>,
 571                                      <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
 572                                      <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
 573                                      <GIC_SPI 53 IRQ_TYPE_EDGE_RISING>,
 574                                      <GIC_SPI 54 IRQ_TYPE_EDGE_RISING>,
 575                                      <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
 576                                      <GIC_SPI 56 IRQ_TYPE_EDGE_RISING>,
 577                                      <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>,
 578                                      <GIC_SPI 58 IRQ_TYPE_EDGE_RISING>,
 579                                      <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>,
 580                                      <GIC_SPI 60 IRQ_TYPE_EDGE_RISING>,
 581                                      <GIC_SPI 61 IRQ_TYPE_EDGE_RISING>,
 582                                      <GIC_SPI 62 IRQ_TYPE_EDGE_RISING>,
 583                                      <GIC_SPI 63 IRQ_TYPE_EDGE_RISING>,
 584                                      <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
 585                         interrupt-names =  "msi0",  "msi1",  "msi2",  "msi3",
 586                                            "msi4",  "msi5",  "msi6",  "msi7",
 587                                            "msi8",  "msi9", "msi10", "msi11",
 588                                           "msi12", "msi13", "msi14", "msi15",
 589                                           "legacy";
 590                         status = "disabled";
 591                 };
 592
 593                 mdio: mdio@90000 {
 594                         #address-cells = <1>;
 595                         #size-cells = <0>;
 596                         compatible = "qcom,ipq4019-mdio";
 597                         reg = <0x90000 0x64>;
 598                         status = "disabled";
 599
 600                         ethphy0: ethernet-phy@0 {
 601                                 reg = <0>;
 602                         };
 603
 604                         ethphy1: ethernet-phy@1 {
 605                                 reg = <1>;
 606                         };
 607
 608                         ethphy2: ethernet-phy@2 {
 609                                 reg = <2>;
 610                         };
 611
 612                         ethphy3: ethernet-phy@3 {
 613                                 reg = <3>;
 614                         };
 615
 616                         ethphy4: ethernet-phy@4 {
 617                                 reg = <4>;
 618                         };
 619                 };
 620
 621                 usb3_ss_phy: ssphy@9a000 {
 622                         compatible = "qcom,usb-ss-ipq4019-phy";
 623                         #phy-cells = <0>;
 624                         reg = <0x9a000 0x800>;
 625                         reg-names = "phy_base";
 626                         resets = <&gcc USB3_UNIPHY_PHY_ARES>;
 627                         reset-names = "por_rst";
 628                         status = "disabled";
 629                 };
 630
 631                 usb3_hs_phy: hsphy@a6000 {
 632                         compatible = "qcom,usb-hs-ipq4019-phy";
 633                         #phy-cells = <0>;
 634                         reg = <0xa6000 0x40>;
 635                         reg-names = "phy_base";
 636                         resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>;
 637                         reset-names = "por_rst", "srif_rst";
 638                         status = "disabled";
 639                 };
 640
 641                 usb3: usb3@8af8800 {
 642                         compatible = "qcom,ipq4019-dwc3", "qcom,dwc3";
 643                         reg = <0x8af8800 0x100>;
 644                         #address-cells = <1>;
 645                         #size-cells = <1>;
 646                         clocks = <&gcc GCC_USB3_MASTER_CLK>,
 647                                  <&gcc GCC_USB3_SLEEP_CLK>,
 648                                  <&gcc GCC_USB3_MOCK_UTMI_CLK>;
 649                         clock-names = "core", "sleep", "mock_utmi";
 650                         ranges;
 651                         status = "disabled";
 652
 653                         dwc3@8a00000 {
 654                                 compatible = "snps,dwc3";
 655                                 reg = <0x8a00000 0xf8000>;
 656                                 interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
 657                                 phys = <&usb3_hs_phy>, <&usb3_ss_phy>;
 658                                 phy-names = "usb2-phy", "usb3-phy";
 659                                 dr_mode = "host";
 660                         };
 661                 };
 662
 663                 usb2_hs_phy: hsphy@a8000 {
 664                         compatible = "qcom,usb-hs-ipq4019-phy";
 665                         #phy-cells = <0>;
 666                         reg = <0xa8000 0x40>;
 667                         reg-names = "phy_base";
 668                         resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>;
 669                         reset-names = "por_rst", "srif_rst";
 670                         status = "disabled";
 671                 };
 672
 673                 usb2: usb2@60f8800 {
 674                         compatible = "qcom,ipq4019-dwc3", "qcom,dwc3";
 675                         reg = <0x60f8800 0x100>;
 676                         #address-cells = <1>;
 677                         #size-cells = <1>;
 678                         clocks = <&gcc GCC_USB2_MASTER_CLK>,
 679                                  <&gcc GCC_USB2_SLEEP_CLK>,
 680                                  <&gcc GCC_USB2_MOCK_UTMI_CLK>;
 681                         clock-names = "master", "sleep", "mock_utmi";
 682                         ranges;
 683                         status = "disabled";
 684
 685                         dwc3@6000000 {
 686                                 compatible = "snps,dwc3";
 687                                 reg = <0x6000000 0xf8000>;
 688                                 interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
 689                                 phys = <&usb2_hs_phy>;
 690                                 phy-names = "usb2-phy";
 691                                 dr_mode = "host";
 692                         };
 693                 };
 694         };
 695 };