arch/arm/boot/dts/r8a7791-koelsch.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Device Tree Source for the Koelsch board
   4  *
   5  * Copyright (C) 2013 Renesas Electronics Corporation
   6  * Copyright (C) 2013-2014 Renesas Solutions Corp.
   7  * Copyright (C) 2014 Cogent Embedded, Inc.
   8  */
   9
  10 /*
  11  * SSI-AK4643
  12  *
  13  * SW1: 1: AK4643
  14  *      2: CN22
  15  *      3: ADV7511
  16  *
  17  * This command is required when Playback/Capture
  18  *
  19  *      amixer set "LINEOUT Mixer DACL" on
  20  *      amixer set "DVC Out" 100%
  21  *      amixer set "DVC In" 100%
  22  *
  23  * You can use Mute
  24  *
  25  *      amixer set "DVC Out Mute" on
  26  *      amixer set "DVC In Mute" on
  27  *
  28  * You can use Volume Ramp
  29  *
  30  *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
  31  *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
  32  *      amixer set "DVC Out Ramp" on
  33  *      aplay xxx.wav &
  34  *      amixer set "DVC Out"  80%  // Volume Down
  35  *      amixer set "DVC Out" 100%  // Volume Up
  36  */
  37
  38 /dts-v1/;
  39 #include "r8a7791.dtsi"
  40 #include <dt-bindings/gpio/gpio.h>
  41 #include <dt-bindings/input/input.h>
  42
  43 / {
  44         model = "Koelsch";
  45         compatible = "renesas,koelsch", "renesas,r8a7791";
  46
  47         aliases {
  48                 serial0 = &scif0;
  49                 serial1 = &scif1;
  50                 i2c9 = &gpioi2c1;
  51                 i2c10 = &gpioi2c2;
  52                 i2c11 = &gpioi2c4;
  53                 i2c12 = &i2cexio1;
  54                 i2c13 = &i2chdmi;
  55                 i2c14 = &i2cexio4;
  56         };
  57
  58         chosen {
  59                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
  60                 stdout-path = "serial0:115200n8";
  61         };
  62
  63         memory@40000000 {
  64                 device_type = "memory";
  65                 reg = <0 0x40000000 0 0x40000000>;
  66         };
  67
  68         memory@200000000 {
  69                 device_type = "memory";
  70                 reg = <2 0x00000000 0 0x40000000>;
  71         };
  72
  73         lbsc {
  74                 #address-cells = <1>;
  75                 #size-cells = <1>;
  76         };
  77
  78         keyboard {
  79                 compatible = "gpio-keys";
  80
  81                 key-1 {
  82                         gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
  83                         linux,code = <KEY_1>;
  84                         label = "SW2-1";
  85                         wakeup-source;
  86                         debounce-interval = <20>;
  87                 };
  88                 key-2 {
  89                         gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
  90                         linux,code = <KEY_2>;
  91                         label = "SW2-2";
  92                         wakeup-source;
  93                         debounce-interval = <20>;
  94                 };
  95                 key-3 {
  96                         gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
  97                         linux,code = <KEY_3>;
  98                         label = "SW2-3";
  99                         wakeup-source;
 100                         debounce-interval = <20>;
 101                 };
 102                 key-4 {
 103                         gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
 104                         linux,code = <KEY_4>;
 105                         label = "SW2-4";
 106                         wakeup-source;
 107                         debounce-interval = <20>;
 108                 };
 109                 key-a {
 110                         gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 111                         linux,code = <KEY_A>;
 112                         label = "SW30";
 113                         wakeup-source;
 114                         debounce-interval = <20>;
 115                 };
 116                 key-b {
 117                         gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
 118                         linux,code = <KEY_B>;
 119                         label = "SW31";
 120                         wakeup-source;
 121                         debounce-interval = <20>;
 122                 };
 123                 key-c {
 124                         gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
 125                         linux,code = <KEY_C>;
 126                         label = "SW32";
 127                         wakeup-source;
 128                         debounce-interval = <20>;
 129                 };
 130                 key-d {
 131                         gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
 132                         linux,code = <KEY_D>;
 133                         label = "SW33";
 134                         wakeup-source;
 135                         debounce-interval = <20>;
 136                 };
 137                 key-e {
 138                         gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
 139                         linux,code = <KEY_E>;
 140                         label = "SW34";
 141                         wakeup-source;
 142                         debounce-interval = <20>;
 143                 };
 144                 key-f {
 145                         gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
 146                         linux,code = <KEY_F>;
 147                         label = "SW35";
 148                         wakeup-source;
 149                         debounce-interval = <20>;
 150                 };
 151                 key-g {
 152                         gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
 153                         linux,code = <KEY_G>;
 154                         label = "SW36";
 155                         wakeup-source;
 156                         debounce-interval = <20>;
 157                 };
 158         };
 159
 160         leds {
 161                 compatible = "gpio-leds";
 162                 led6 {
 163                         gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 164                         label = "LED6";
 165                 };
 166                 led7 {
 167                         gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
 168                         label = "LED7";
 169                 };
 170                 led8 {
 171                         gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
 172                         label = "LED8";
 173                 };
 174         };
 175
 176         vcc_sdhi0: regulator-vcc-sdhi0 {
 177                 compatible = "regulator-fixed";
 178
 179                 regulator-name = "SDHI0 Vcc";
 180                 regulator-min-microvolt = <3300000>;
 181                 regulator-max-microvolt = <3300000>;
 182
 183                 gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
 184                 enable-active-high;
 185         };
 186
 187         vccq_sdhi0: regulator-vccq-sdhi0 {
 188                 compatible = "regulator-gpio";
 189
 190                 regulator-name = "SDHI0 VccQ";
 191                 regulator-min-microvolt = <1800000>;
 192                 regulator-max-microvolt = <3300000>;
 193
 194                 gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
 195                 gpios-states = <1>;
 196                 states = <3300000 1>, <1800000 0>;
 197         };
 198
 199         vcc_sdhi1: regulator-vcc-sdhi1 {
 200                 compatible = "regulator-fixed";
 201
 202                 regulator-name = "SDHI1 Vcc";
 203                 regulator-min-microvolt = <3300000>;
 204                 regulator-max-microvolt = <3300000>;
 205
 206                 gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
 207                 enable-active-high;
 208         };
 209
 210         vccq_sdhi1: regulator-vccq-sdhi1 {
 211                 compatible = "regulator-gpio";
 212
 213                 regulator-name = "SDHI1 VccQ";
 214                 regulator-min-microvolt = <1800000>;
 215                 regulator-max-microvolt = <3300000>;
 216
 217                 gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
 218                 gpios-states = <1>;
 219                 states = <3300000 1>, <1800000 0>;
 220         };
 221
 222         vcc_sdhi2: regulator-vcc-sdhi2 {
 223                 compatible = "regulator-fixed";
 224
 225                 regulator-name = "SDHI2 Vcc";
 226                 regulator-min-microvolt = <3300000>;
 227                 regulator-max-microvolt = <3300000>;
 228
 229                 gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
 230                 enable-active-high;
 231         };
 232
 233         vccq_sdhi2: regulator-vccq-sdhi2 {
 234                 compatible = "regulator-gpio";
 235
 236                 regulator-name = "SDHI2 VccQ";
 237                 regulator-min-microvolt = <1800000>;
 238                 regulator-max-microvolt = <3300000>;
 239
 240                 gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
 241                 gpios-states = <1>;
 242                 states = <3300000 1>, <1800000 0>;
 243         };
 244
 245         audio_clock: audio_clock {
 246                 compatible = "fixed-clock";
 247                 #clock-cells = <0>;
 248                 clock-frequency = <11289600>;
 249         };
 250
 251         rsnd_ak4643: sound {
 252                 compatible = "simple-audio-card";
 253
 254                 simple-audio-card,format = "left_j";
 255                 simple-audio-card,bitclock-master = <&sndcodec>;
 256                 simple-audio-card,frame-master = <&sndcodec>;
 257
 258                 sndcpu: simple-audio-card,cpu {
 259                         sound-dai = <&rcar_sound>;
 260                 };
 261
 262                 sndcodec: simple-audio-card,codec {
 263                         sound-dai = <&ak4643>;
 264                         clocks = <&audio_clock>;
 265                 };
 266         };
 267
 268         hdmi-in {
 269                 compatible = "hdmi-connector";
 270                 type = "a";
 271
 272                 port {
 273                         hdmi_con_in: endpoint {
 274                                 remote-endpoint = <&adv7612_in>;
 275                         };
 276                 };
 277         };
 278
 279         cec_clock: cec-clock {
 280                 compatible = "fixed-clock";
 281                 #clock-cells = <0>;
 282                 clock-frequency = <12000000>;
 283         };
 284
 285         hdmi-out {
 286                 compatible = "hdmi-connector";
 287                 type = "a";
 288
 289                 port {
 290                         hdmi_con_out: endpoint {
 291                                 remote-endpoint = <&adv7511_out>;
 292                         };
 293                 };
 294         };
 295
 296         x2_clk: x2-clock {
 297                 compatible = "fixed-clock";
 298                 #clock-cells = <0>;
 299                 clock-frequency = <74250000>;
 300         };
 301
 302         x13_clk: x13-clock {
 303                 compatible = "fixed-clock";
 304                 #clock-cells = <0>;
 305                 clock-frequency = <148500000>;
 306         };
 307
 308         gpioi2c1: i2c-9 {
 309                 #address-cells = <1>;
 310                 #size-cells = <0>;
 311                 compatible = "i2c-gpio";
 312                 status = "disabled";
 313                 scl-gpios = <&gpio7 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 314                 sda-gpios = <&gpio7 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 315                 i2c-gpio,delay-us = <5>;
 316         };
 317
 318         gpioi2c2: i2c-10 {
 319                 #address-cells = <1>;
 320                 #size-cells = <0>;
 321                 compatible = "i2c-gpio";
 322                 status = "disabled";
 323                 scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 324                 sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 325                 i2c-gpio,delay-us = <5>;
 326         };
 327
 328         gpioi2c4: i2c-11 {
 329                 #address-cells = <1>;
 330                 #size-cells = <0>;
 331                 compatible = "i2c-gpio";
 332                 status = "disabled";
 333                 scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 334                 sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 335                 i2c-gpio,delay-us = <5>;
 336         };
 337
 338         /*
 339          * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
 340          * A fallback to GPIO is provided.
 341          */
 342         i2cexio1: i2c-12 {
 343                 compatible = "i2c-demux-pinctrl";
 344                 i2c-parent = <&i2c1>, <&gpioi2c1>;
 345                 i2c-bus-name = "i2c-exio1";
 346                 #address-cells = <1>;
 347                 #size-cells = <0>;
 348         };
 349
 350         /*
 351          * A fallback to GPIO is provided for I2C2.
 352          */
 353         i2chdmi: i2c-13 {
 354                 compatible = "i2c-demux-pinctrl";
 355                 i2c-parent = <&i2c2>, <&gpioi2c2>;
 356                 i2c-bus-name = "i2c-hdmi";
 357                 #address-cells = <1>;
 358                 #size-cells = <0>;
 359
 360                 ak4643: codec@12 {
 361                         compatible = "asahi-kasei,ak4643";
 362                         #sound-dai-cells = <0>;
 363                         reg = <0x12>;
 364                 };
 365
 366                 composite-in@20 {
 367                         compatible = "adi,adv7180";
 368                         reg = <0x20>;
 369                         remote = <&vin1>;
 370
 371                         port {
 372                                 adv7180: endpoint {
 373                                         bus-width = <8>;
 374                                         remote-endpoint = <&vin1ep>;
 375                                 };
 376                         };
 377                 };
 378
 379                 hdmi@39 {
 380                         compatible = "adi,adv7511w";
 381                         reg = <0x39>;
 382                         interrupt-parent = <&gpio3>;
 383                         interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 384                         clocks = <&cec_clock>;
 385                         clock-names = "cec";
 386
 387                         adi,input-depth = <8>;
 388                         adi,input-colorspace = "rgb";
 389                         adi,input-clock = "1x";
 390
 391                         ports {
 392                                 #address-cells = <1>;
 393                                 #size-cells = <0>;
 394
 395                                 port@0 {
 396                                         reg = <0>;
 397                                         adv7511_in: endpoint {
 398                                                 remote-endpoint = <&du_out_rgb>;
 399                                         };
 400                                 };
 401
 402                                 port@1 {
 403                                         reg = <1>;
 404                                         adv7511_out: endpoint {
 405                                                 remote-endpoint = <&hdmi_con_out>;
 406                                         };
 407                                 };
 408                         };
 409                 };
 410
 411                 hdmi-in@4c {
 412                         compatible = "adi,adv7612";
 413                         reg = <0x4c>;
 414                         interrupt-parent = <&gpio4>;
 415                         interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 416                         default-input = <0>;
 417
 418                         ports {
 419                                 #address-cells = <1>;
 420                                 #size-cells = <0>;
 421
 422                                 port@0 {
 423                                         reg = <0>;
 424                                         adv7612_in: endpoint {
 425                                                 remote-endpoint = <&hdmi_con_in>;
 426                                         };
 427                                 };
 428
 429                                 port@2 {
 430                                         reg = <2>;
 431                                         adv7612_out: endpoint {
 432                                                 remote-endpoint = <&vin0ep2>;
 433                                         };
 434                                 };
 435                         };
 436                 };
 437
 438                 eeprom@50 {
 439                         compatible = "renesas,r1ex24002", "atmel,24c02";
 440                         reg = <0x50>;
 441                         pagesize = <16>;
 442                 };
 443         };
 444
 445         /*
 446          * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
 447          * A fallback to GPIO is provided.
 448          */
 449         i2cexio4: i2c-14 {
 450                 compatible = "i2c-demux-pinctrl";
 451                 i2c-parent = <&i2c4>, <&gpioi2c4>;
 452                 i2c-bus-name = "i2c-exio4";
 453                 #address-cells = <1>;
 454                 #size-cells = <0>;
 455         };
 456 };
 457
 458 &du {
 459         pinctrl-0 = <&du_pins>;
 460         pinctrl-names = "default";
 461         status = "okay";
 462
 463         clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
 464                  <&x13_clk>, <&x2_clk>;
 465         clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
 466
 467         ports {
 468                 port@0 {
 469                         endpoint {
 470                                 remote-endpoint = <&adv7511_in>;
 471                         };
 472                 };
 473         };
 474 };
 475
 476 &lvds0 {
 477         ports {
 478                 port@1 {
 479                         lvds_connector: endpoint {
 480                         };
 481                 };
 482         };
 483 };
 484
 485 &extal_clk {
 486         clock-frequency = <20000000>;
 487 };
 488
 489 &pfc {
 490         pinctrl-0 = <&scif_clk_pins>;
 491         pinctrl-names = "default";
 492
 493         i2c1_pins: i2c1 {
 494                 groups = "i2c1";
 495                 function = "i2c1";
 496         };
 497
 498         i2c2_pins: i2c2 {
 499                 groups = "i2c2";
 500                 function = "i2c2";
 501         };
 502
 503         i2c4_pins: i2c4 {
 504                 groups = "i2c4_c";
 505                 function = "i2c4";
 506         };
 507
 508         du_pins: du {
 509                 groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
 510                 function = "du";
 511         };
 512
 513         scif0_pins: scif0 {
 514                 groups = "scif0_data_d";
 515                 function = "scif0";
 516         };
 517
 518         scif1_pins: scif1 {
 519                 groups = "scif1_data_d";
 520                 function = "scif1";
 521         };
 522
 523         scif_clk_pins: scif_clk {
 524                 groups = "scif_clk";
 525                 function = "scif_clk";
 526         };
 527
 528         ether_pins: ether {
 529                 groups = "eth_link", "eth_mdio", "eth_rmii";
 530                 function = "eth";
 531         };
 532
 533         phy1_pins: phy1 {
 534                 groups = "intc_irq0";
 535                 function = "intc";
 536         };
 537
 538         pmic_irq_pins: pmicirq {
 539                 groups = "intc_irq2";
 540                 function = "intc";
 541         };
 542
 543         sdhi0_pins: sd0 {
 544                 groups = "sdhi0_data4", "sdhi0_ctrl";
 545                 function = "sdhi0";
 546                 power-source = <3300>;
 547         };
 548
 549         sdhi0_pins_uhs: sd0_uhs {
 550                 groups = "sdhi0_data4", "sdhi0_ctrl";
 551                 function = "sdhi0";
 552                 power-source = <1800>;
 553         };
 554
 555         sdhi1_pins: sd1 {
 556                 groups = "sdhi1_data4", "sdhi1_ctrl";
 557                 function = "sdhi1";
 558                 power-source = <3300>;
 559         };
 560
 561         sdhi1_pins_uhs: sd1_uhs {
 562                 groups = "sdhi1_data4", "sdhi1_ctrl";
 563                 function = "sdhi1";
 564                 power-source = <1800>;
 565         };
 566
 567         sdhi2_pins: sd2 {
 568                 groups = "sdhi2_data4", "sdhi2_ctrl";
 569                 function = "sdhi2";
 570                 power-source = <3300>;
 571         };
 572
 573         sdhi2_pins_uhs: sd2_uhs {
 574                 groups = "sdhi2_data4", "sdhi2_ctrl";
 575                 function = "sdhi2";
 576                 power-source = <1800>;
 577         };
 578
 579         qspi_pins: qspi {
 580                 groups = "qspi_ctrl", "qspi_data4";
 581                 function = "qspi";
 582         };
 583
 584         msiof0_pins: msiof0 {
 585                 groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
 586                                  "msiof0_tx";
 587                 function = "msiof0";
 588         };
 589
 590         usb0_pins: usb0 {
 591                 groups = "usb0";
 592                 function = "usb0";
 593         };
 594
 595         usb1_pins: usb1 {
 596                 groups = "usb1";
 597                 function = "usb1";
 598         };
 599
 600         vin0_pins: vin0 {
 601                 groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
 602                 function = "vin0";
 603         };
 604
 605         vin1_pins: vin1 {
 606                 groups = "vin1_data8", "vin1_clk";
 607                 function = "vin1";
 608         };
 609
 610         sound_pins: sound {
 611                 groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
 612                 function = "ssi";
 613         };
 614
 615         sound_clk_pins: sound_clk {
 616                 groups = "audio_clk_a";
 617                 function = "audio_clk";
 618         };
 619 };
 620
 621 &ether {
 622         pinctrl-0 = <&ether_pins &phy1_pins>;
 623         pinctrl-names = "default";
 624
 625         phy-handle = <&phy1>;
 626         renesas,ether-link-active-low;
 627         status = "okay";
 628
 629         phy1: ethernet-phy@1 {
 630                 reg = <1>;
 631                 interrupt-parent = <&irqc0>;
 632                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 633                 micrel,led-mode = <1>;
 634                 reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
 635         };
 636 };
 637
 638 &cmt0 {
 639         status = "okay";
 640 };
 641
 642 &rwdt {
 643         timeout-sec = <60>;
 644         status = "okay";
 645 };
 646
 647 &sata0 {
 648         status = "okay";
 649 };
 650
 651 &scif0 {
 652         pinctrl-0 = <&scif0_pins>;
 653         pinctrl-names = "default";
 654
 655         status = "okay";
 656 };
 657
 658 &scif1 {
 659         pinctrl-0 = <&scif1_pins>;
 660         pinctrl-names = "default";
 661
 662         status = "okay";
 663 };
 664
 665 &scif_clk {
 666         clock-frequency = <14745600>;
 667 };
 668
 669 &sdhi0 {
 670         pinctrl-0 = <&sdhi0_pins>;
 671         pinctrl-1 = <&sdhi0_pins_uhs>;
 672         pinctrl-names = "default", "state_uhs";
 673
 674         vmmc-supply = <&vcc_sdhi0>;
 675         vqmmc-supply = <&vccq_sdhi0>;
 676         cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
 677         wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
 678         sd-uhs-sdr50;
 679         sd-uhs-sdr104;
 680         status = "okay";
 681 };
 682
 683 &sdhi1 {
 684         pinctrl-0 = <&sdhi1_pins>;
 685         pinctrl-1 = <&sdhi1_pins_uhs>;
 686         pinctrl-names = "default", "state_uhs";
 687
 688         vmmc-supply = <&vcc_sdhi1>;
 689         vqmmc-supply = <&vccq_sdhi1>;
 690         cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 691         wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
 692         sd-uhs-sdr50;
 693         status = "okay";
 694 };
 695
 696 &sdhi2 {
 697         pinctrl-0 = <&sdhi2_pins>;
 698         pinctrl-1 = <&sdhi2_pins_uhs>;
 699         pinctrl-names = "default", "state_uhs";
 700
 701         vmmc-supply = <&vcc_sdhi2>;
 702         vqmmc-supply = <&vccq_sdhi2>;
 703         cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
 704         sd-uhs-sdr50;
 705         status = "okay";
 706 };
 707
 708 &qspi {
 709         pinctrl-0 = <&qspi_pins>;
 710         pinctrl-names = "default";
 711
 712         status = "okay";
 713
 714         flash: flash@0 {
 715                 compatible = "spansion,s25fl512s", "jedec,spi-nor";
 716                 reg = <0>;
 717                 spi-max-frequency = <30000000>;
 718                 spi-tx-bus-width = <4>;
 719                 spi-rx-bus-width = <4>;
 720                 spi-cpha;
 721                 spi-cpol;
 722                 m25p,fast-read;
 723
 724                 partitions {
 725                         compatible = "fixed-partitions";
 726                         #address-cells = <1>;
 727                         #size-cells = <1>;
 728
 729                         partition@0 {
 730                                 label = "loader";
 731                                 reg = <0x00000000 0x00080000>;
 732                                 read-only;
 733                         };
 734                         partition@80000 {
 735                                 label = "user";
 736                                 reg = <0x00080000 0x00580000>;
 737                                 read-only;
 738                         };
 739                         partition@600000 {
 740                                 label = "flash";
 741                                 reg = <0x00600000 0x03a00000>;
 742                         };
 743                 };
 744         };
 745 };
 746
 747 &msiof0 {
 748         pinctrl-0 = <&msiof0_pins>;
 749         pinctrl-names = "default";
 750
 751         status = "okay";
 752
 753         pmic: pmic@0 {
 754                 compatible = "renesas,r2a11302ft";
 755                 reg = <0>;
 756                 spi-max-frequency = <6000000>;
 757                 spi-cpol;
 758                 spi-cpha;
 759         };
 760 };
 761
 762 &i2c1 {
 763         pinctrl-0 = <&i2c1_pins>;
 764         pinctrl-names = "i2c-exio1";
 765 };
 766
 767 &i2c2 {
 768         pinctrl-0 = <&i2c2_pins>;
 769         pinctrl-names = "i2c-hdmi";
 770
 771         clock-frequency = <100000>;
 772 };
 773
 774 &i2c4 {
 775         pinctrl-0 = <&i2c4_pins>;
 776         pinctrl-names = "i2c-exio4";
 777 };
 778
 779 &i2c6 {
 780         pinctrl-names = "default";
 781         pinctrl-0 = <&pmic_irq_pins>;
 782         status = "okay";
 783         clock-frequency = <100000>;
 784
 785         pmic@58 {
 786                 compatible = "dlg,da9063";
 787                 reg = <0x58>;
 788                 interrupt-parent = <&irqc0>;
 789                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 790                 interrupt-controller;
 791
 792                 rtc {
 793                         compatible = "dlg,da9063-rtc";
 794                 };
 795
 796                 wdt {
 797                         compatible = "dlg,da9063-watchdog";
 798                 };
 799         };
 800
 801         vdd_dvfs: regulator@68 {
 802                 compatible = "dlg,da9210";
 803                 reg = <0x68>;
 804                 interrupt-parent = <&irqc0>;
 805                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 806
 807                 regulator-min-microvolt = <1000000>;
 808                 regulator-max-microvolt = <1000000>;
 809                 regulator-boot-on;
 810                 regulator-always-on;
 811         };
 812 };
 813
 814 &pci0 {
 815         status = "okay";
 816         pinctrl-0 = <&usb0_pins>;
 817         pinctrl-names = "default";
 818 };
 819
 820 &pci1 {
 821         status = "okay";
 822         pinctrl-0 = <&usb1_pins>;
 823         pinctrl-names = "default";
 824 };
 825
 826 &hsusb {
 827         status = "okay";
 828         pinctrl-0 = <&usb0_pins>;
 829         pinctrl-names = "default";
 830         renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
 831 };
 832
 833 &usbphy {
 834         status = "okay";
 835 };
 836
 837 &pcie_bus_clk {
 838         clock-frequency = <100000000>;
 839 };
 840
 841 &pciec {
 842         status = "okay";
 843 };
 844
 845 &cpu0 {
 846         cpu0-supply = <&vdd_dvfs>;
 847 };
 848
 849 /* HDMI video input */
 850 &vin0 {
 851         status = "okay";
 852         pinctrl-0 = <&vin0_pins>;
 853         pinctrl-names = "default";
 854
 855         port {
 856                 vin0ep2: endpoint {
 857                         remote-endpoint = <&adv7612_out>;
 858                         bus-width = <24>;
 859                         hsync-active = <0>;
 860                         vsync-active = <0>;
 861                         pclk-sample = <1>;
 862                         data-active = <1>;
 863                 };
 864         };
 865 };
 866
 867 /* composite video input */
 868 &vin1 {
 869         status = "okay";
 870         pinctrl-0 = <&vin1_pins>;
 871         pinctrl-names = "default";
 872
 873         port {
 874                 vin1ep: endpoint {
 875                         remote-endpoint = <&adv7180>;
 876                         bus-width = <8>;
 877                 };
 878         };
 879 };
 880
 881 &rcar_sound {
 882         pinctrl-0 = <&sound_pins &sound_clk_pins>;
 883         pinctrl-names = "default";
 884
 885         /* Single DAI */
 886         #sound-dai-cells = <0>;
 887
 888         status = "okay";
 889
 890         rcar_sound,dai {
 891                 dai0 {
 892                         playback = <&ssi0 &src2 &dvc0>;
 893                         capture  = <&ssi1 &src3 &dvc1>;
 894                 };
 895         };
 896 };
 897
 898 &ssi1 {
 899         shared-pin;
 900 };