arch/arm/cpu/armv8/zynqmp/Kconfig

   1 if ARCH_ZYNQMP
   2
   3 config SPL_FAT_SUPPORT
   4         default y
   5
   6 config SPL_LIBCOMMON_SUPPORT
   7         default y
   8
   9 config SPL_LIBDISK_SUPPORT
  10         default y
  11
  12 config SPL_LIBGENERIC_SUPPORT
  13         default y
  14
  15 config SPL_MMC_SUPPORT
  16         default y if MMC_SDHCI_ZYNQ
  17
  18 config SPL_SERIAL_SUPPORT
  19         default y
  20
  21 config SPL_SPI_FLASH_SUPPORT
  22         default y if ZYNQ_QSPI
  23
  24 config SPL_SPI_SUPPORT
  25         default y if ZYNQ_QSPI
  26
  27 config SYS_BOARD
  28         default "zynqmp"
  29
  30 config SYS_VENDOR
  31         string "Vendor name"
  32         default "xilinx"
  33
  34 config SYS_SOC
  35         default "zynqmp"
  36
  37 config SYS_CONFIG_NAME
  38         string "Board configuration name"
  39         default "xilinx_zynqmp"
  40         help
  41           This option contains information about board configuration name.
  42           Based on this option include/configs/<CONFIG_SYS_CONFIG_NAME>.h header
  43           will be used for board configuration.
  44
  45 config BOOT_INIT_FILE
  46         string "boot.bin init register filename"
  47         depends on SPL
  48         default ""
  49         help
  50           Add register writes to boot.bin format (max 256 pairs).
  51           Expect a table of register-value pairs, e.g. "0x12345678 0x4321"
  52
  53 config ZYNQMP_USB
  54         bool "Configure ZynqMP USB"
  55
  56 config SYS_MALLOC_F_LEN
  57         default 0x600
  58
  59 config SPL_ZYNQMP_ALT_BOOTMODE_ENABLED
  60         bool "Overwrite SPL bootmode"
  61         depends on SPL
  62         help
  63           Overwrite bootmode selected via boot mode pins to tell SPL what should
  64           be the next boot device.
  65
  66 config SPL_ZYNQMP_ALT_BOOTMODE
  67         hex
  68         default 0x0 if JTAG_MODE
  69         default 0x1 if QSPI_MODE_24BIT
  70         default 0x2 if QSPI_MODE_32BIT
  71         default 0x3 if SD_MODE
  72         default 0x4 if NAND_MODE
  73         default 0x5 if SD_MODE1
  74         default 0x6 if EMMC_MODE
  75         default 0x7 if USB_MODE
  76         default 0xa if SW_USBHOST_MODE
  77         default 0xb if SW_SATA_MODE
  78
  79 choice
  80         prompt "Boot mode"
  81         depends on SPL_ZYNQMP_ALT_BOOTMODE_ENABLED
  82         default JTAG
  83
  84 config JTAG_MODE
  85         bool "JTAG_MODE"
  86
  87 config QSPI_MODE_24BIT
  88         bool "QSPI_MODE_24BIT"
  89
  90 config QSPI_MODE_32BIT
  91         bool "QSPI_MODE_32BIT"
  92
  93 config SD_MODE
  94         bool "SD_MODE"
  95
  96 config SD_MODE1
  97         bool "SD_MODE1"
  98
  99 config NAND_MODE
 100         bool "NAND_MODE"
 101
 102 config EMMC_MODE
 103         bool "EMMC_MODE"
 104
 105 config USB_MODE
 106         bool "USB"
 107
 108 config SW_USBHOST_MODE
 109         bool "SW USBHOST_MODE"
 110
 111 config SW_SATA_MODE
 112         bool "SW SATA_MODE"
 113
 114 endchoice
 115
 116 endif