arch/arm/dts/am335x-evmsk.dts

   1 /*
   2  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 /*
  10  * AM335x Starter Kit
  11  * http://www.ti.com/tool/tmdssk3358
  12  */
  13
  14 /dts-v1/;
  15
  16 #include "am33xx.dtsi"
  17 #include <dt-bindings/pwm/pwm.h>
  18 #include <dt-bindings/interrupt-controller/irq.h>
  19
  20 / {
  21         model = "TI AM335x EVM-SK";
  22         compatible = "ti,am335x-evmsk", "ti,am33xx";
  23
  24         chosen {
  25                 stdout-path = &uart0;
  26                 tick-timer = &timer2;
  27         };
  28
  29         cpus {
  30                 cpu@0 {
  31                         cpu0-supply = <&vdd1_reg>;
  32                 };
  33         };
  34
  35         memory {
  36                 device_type = "memory";
  37                 reg = <0x80000000 0x10000000>; /* 256 MB */
  38         };
  39
  40         vbat: fixedregulator@0 {
  41                 compatible = "regulator-fixed";
  42                 regulator-name = "vbat";
  43                 regulator-min-microvolt = <5000000>;
  44                 regulator-max-microvolt = <5000000>;
  45                 regulator-boot-on;
  46         };
  47
  48         lis3_reg: fixedregulator@1 {
  49                 compatible = "regulator-fixed";
  50                 regulator-name = "lis3_reg";
  51                 regulator-boot-on;
  52         };
  53
  54         wl12xx_vmmc: fixedregulator@2 {
  55                 pinctrl-names = "default";
  56                 pinctrl-0 = <&wl12xx_gpio>;
  57                 compatible = "regulator-fixed";
  58                 regulator-name = "vwl1271";
  59                 regulator-min-microvolt = <1800000>;
  60                 regulator-max-microvolt = <1800000>;
  61                 gpio = <&gpio1 29 0>;
  62                 startup-delay-us = <70000>;
  63                 enable-active-high;
  64         };
  65
  66         vtt_fixed: fixedregulator@3 {
  67                 compatible = "regulator-fixed";
  68                 regulator-name = "vtt";
  69                 regulator-min-microvolt = <1500000>;
  70                 regulator-max-microvolt = <1500000>;
  71                 gpio = <&gpio0 7 GPIO_ACTIVE_HIGH>;
  72                 regulator-always-on;
  73                 regulator-boot-on;
  74                 enable-active-high;
  75         };
  76
  77         leds {
  78                 pinctrl-names = "default";
  79                 pinctrl-0 = <&user_leds_s0>;
  80
  81                 compatible = "gpio-leds";
  82
  83                 led@1 {
  84                         label = "evmsk:green:usr0";
  85                         gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
  86                         default-state = "off";
  87                 };
  88
  89                 led@2 {
  90                         label = "evmsk:green:usr1";
  91                         gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
  92                         default-state = "off";
  93                 };
  94
  95                 led@3 {
  96                         label = "evmsk:green:mmc0";
  97                         gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
  98                         linux,default-trigger = "mmc0";
  99                         default-state = "off";
 100                 };
 101
 102                 led@4 {
 103                         label = "evmsk:green:heartbeat";
 104                         gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 105                         linux,default-trigger = "heartbeat";
 106                         default-state = "off";
 107                 };
 108         };
 109
 110         gpio_buttons: gpio_buttons@0 {
 111                 compatible = "gpio-keys";
 112
 113                 switch@1 {
 114                         label = "button0";
 115                         linux,code = <0x100>;
 116                         gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
 117                 };
 118
 119                 switch@2 {
 120                         label = "button1";
 121                         linux,code = <0x101>;
 122                         gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
 123                 };
 124
 125                 switch@3 {
 126                         label = "button2";
 127                         linux,code = <0x102>;
 128                         gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
 129                         wakeup-source;
 130                 };
 131
 132                 switch@4 {
 133                         label = "button3";
 134                         linux,code = <0x103>;
 135                         gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
 136                 };
 137         };
 138
 139         backlight {
 140                 compatible = "pwm-backlight";
 141                 pwms = <&ecap2 0 50000 PWM_POLARITY_INVERTED>;
 142                 brightness-levels = <0 58 61 66 75 90 125 170 255>;
 143                 default-brightness-level = <8>;
 144         };
 145
 146         sound {
 147                 compatible = "simple-audio-card";
 148                 simple-audio-card,name = "AM335x-EVMSK";
 149                 simple-audio-card,widgets =
 150                         "Headphone", "Headphone Jack";
 151                 simple-audio-card,routing =
 152                         "Headphone Jack",       "HPLOUT",
 153                         "Headphone Jack",       "HPROUT";
 154                 simple-audio-card,format = "dsp_b";
 155                 simple-audio-card,bitclock-master = <&sound_master>;
 156                 simple-audio-card,frame-master = <&sound_master>;
 157                 simple-audio-card,bitclock-inversion;
 158
 159                 simple-audio-card,cpu {
 160                         sound-dai = <&mcasp1>;
 161                 };
 162
 163                 sound_master: simple-audio-card,codec {
 164                         sound-dai = <&tlv320aic3106>;
 165                         system-clock-frequency = <24000000>;
 166                 };
 167         };
 168
 169         panel {
 170                 compatible = "ti,tilcdc,panel";
 171                 pinctrl-names = "default", "sleep";
 172                 pinctrl-0 = <&lcd_pins_default>;
 173                 pinctrl-1 = <&lcd_pins_sleep>;
 174                 status = "okay";
 175                 panel-info {
 176                         ac-bias           = <255>;
 177                         ac-bias-intrpt    = <0>;
 178                         dma-burst-sz      = <16>;
 179                         bpp               = <32>;
 180                         fdd               = <0x80>;
 181                         sync-edge         = <0>;
 182                         sync-ctrl         = <1>;
 183                         raster-order      = <0>;
 184                         fifo-th           = <0>;
 185                 };
 186                 display-timings {
 187                         480x272 {
 188                                 hactive         = <480>;
 189                                 vactive         = <272>;
 190                                 hback-porch     = <43>;
 191                                 hfront-porch    = <8>;
 192                                 hsync-len       = <4>;
 193                                 vback-porch     = <12>;
 194                                 vfront-porch    = <4>;
 195                                 vsync-len       = <10>;
 196                                 clock-frequency = <9000000>;
 197                                 hsync-active    = <0>;
 198                                 vsync-active    = <0>;
 199                         };
 200                 };
 201         };
 202 };
 203
 204 &am33xx_pinmux {
 205         pinctrl-names = "default";
 206         pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
 207
 208         lcd_pins_default: lcd_pins_default {
 209                 pinctrl-single,pins = <
 210                         AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1)     /* gpmc_ad8.lcd_data23 */
 211                         AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)     /* gpmc_ad9.lcd_data22 */
 212                         AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)     /* gpmc_ad10.lcd_data21 */
 213                         AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)     /* gpmc_ad11.lcd_data20 */
 214                         AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)     /* gpmc_ad12.lcd_data19 */
 215                         AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)     /* gpmc_ad13.lcd_data18 */
 216                         AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)     /* gpmc_ad14.lcd_data17 */
 217                         AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1)     /* gpmc_ad15.lcd_data16 */
 218                         AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)     /* lcd_data0.lcd_data0 */
 219                         AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)     /* lcd_data1.lcd_data1 */
 220                         AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)     /* lcd_data2.lcd_data2 */
 221                         AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)     /* lcd_data3.lcd_data3 */
 222                         AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)     /* lcd_data4.lcd_data4 */
 223                         AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)     /* lcd_data5.lcd_data5 */
 224                         AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)     /* lcd_data6.lcd_data6 */
 225                         AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)     /* lcd_data7.lcd_data7 */
 226                         AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)     /* lcd_data8.lcd_data8 */
 227                         AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)     /* lcd_data9.lcd_data9 */
 228                         AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)     /* lcd_data10.lcd_data10 */
 229                         AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)     /* lcd_data11.lcd_data11 */
 230                         AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)     /* lcd_data12.lcd_data12 */
 231                         AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)     /* lcd_data13.lcd_data13 */
 232                         AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)     /* lcd_data14.lcd_data14 */
 233                         AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)     /* lcd_data15.lcd_data15 */
 234                         AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)     /* lcd_vsync.lcd_vsync */
 235                         AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)     /* lcd_hsync.lcd_hsync */
 236                         AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)     /* lcd_pclk.lcd_pclk */
 237                         AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)     /* lcd_ac_bias_en.lcd_ac_bias_en */
 238                 >;
 239         };
 240
 241         lcd_pins_sleep: lcd_pins_sleep {
 242                 pinctrl-single,pins = <
 243                         AM33XX_IOPAD(0x820, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad8.lcd_data23 */
 244                         AM33XX_IOPAD(0x824, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad9.lcd_data22 */
 245                         AM33XX_IOPAD(0x828, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad10.lcd_data21 */
 246                         AM33XX_IOPAD(0x82c, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad11.lcd_data20 */
 247                         AM33XX_IOPAD(0x830, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad12.lcd_data19 */
 248                         AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad13.lcd_data18 */
 249                         AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad14.lcd_data17 */
 250                         AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad15.lcd_data16 */
 251                         AM33XX_IOPAD(0x8a0, PULL_DISABLE | MUX_MODE7)   /* lcd_data0.lcd_data0 */
 252                         AM33XX_IOPAD(0x8a4, PULL_DISABLE | MUX_MODE7)   /* lcd_data1.lcd_data1 */
 253                         AM33XX_IOPAD(0x8a8, PULL_DISABLE | MUX_MODE7)   /* lcd_data2.lcd_data2 */
 254                         AM33XX_IOPAD(0x8ac, PULL_DISABLE | MUX_MODE7)   /* lcd_data3.lcd_data3 */
 255                         AM33XX_IOPAD(0x8b0, PULL_DISABLE | MUX_MODE7)   /* lcd_data4.lcd_data4 */
 256                         AM33XX_IOPAD(0x8b4, PULL_DISABLE | MUX_MODE7)   /* lcd_data5.lcd_data5 */
 257                         AM33XX_IOPAD(0x8b8, PULL_DISABLE | MUX_MODE7)   /* lcd_data6.lcd_data6 */
 258                         AM33XX_IOPAD(0x8bc, PULL_DISABLE | MUX_MODE7)   /* lcd_data7.lcd_data7 */
 259                         AM33XX_IOPAD(0x8c0, PULL_DISABLE | MUX_MODE7)   /* lcd_data8.lcd_data8 */
 260                         AM33XX_IOPAD(0x8c4, PULL_DISABLE | MUX_MODE7)   /* lcd_data9.lcd_data9 */
 261                         AM33XX_IOPAD(0x8c8, PULL_DISABLE | MUX_MODE7)   /* lcd_data10.lcd_data10 */
 262                         AM33XX_IOPAD(0x8cc, PULL_DISABLE | MUX_MODE7)   /* lcd_data11.lcd_data11 */
 263                         AM33XX_IOPAD(0x8d0, PULL_DISABLE | MUX_MODE7)   /* lcd_data12.lcd_data12 */
 264                         AM33XX_IOPAD(0x8d4, PULL_DISABLE | MUX_MODE7)   /* lcd_data13.lcd_data13 */
 265                         AM33XX_IOPAD(0x8d8, PULL_DISABLE | MUX_MODE7)   /* lcd_data14.lcd_data14 */
 266                         AM33XX_IOPAD(0x8dc, PULL_DISABLE | MUX_MODE7)   /* lcd_data15.lcd_data15 */
 267                         AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* lcd_vsync.lcd_vsync */
 268                         AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* lcd_hsync.lcd_hsync */
 269                         AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* lcd_pclk.lcd_pclk */
 270                         AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* lcd_ac_bias_en.lcd_ac_bias_en */
 271                 >;
 272         };
 273
 274
 275         user_leds_s0: user_leds_s0 {
 276                 pinctrl-single,pins = <
 277                         AM33XX_IOPAD(0x810, PIN_OUTPUT_PULLDOWN | MUX_MODE7)    /* gpmc_ad4.gpio1_4 */
 278                         AM33XX_IOPAD(0x814, PIN_OUTPUT_PULLDOWN | MUX_MODE7)    /* gpmc_ad5.gpio1_5 */
 279                         AM33XX_IOPAD(0x818, PIN_OUTPUT_PULLDOWN | MUX_MODE7)    /* gpmc_ad6.gpio1_6 */
 280                         AM33XX_IOPAD(0x81c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)    /* gpmc_ad7.gpio1_7 */
 281                 >;
 282         };
 283
 284         gpio_keys_s0: gpio_keys_s0 {
 285                 pinctrl-single,pins = <
 286                         AM33XX_IOPAD(0x894, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_oen_ren.gpio2_3 */
 287                         AM33XX_IOPAD(0x890, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_advn_ale.gpio2_2 */
 288                         AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_wait0.gpio0_30 */
 289                         AM33XX_IOPAD(0x89c, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ben0_cle.gpio2_5 */
 290                 >;
 291         };
 292
 293         i2c0_pins: pinmux_i2c0_pins {
 294                 pinctrl-single,pins = <
 295                         AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)       /* i2c0_sda.i2c0_sda */
 296                         AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)       /* i2c0_scl.i2c0_scl */
 297                 >;
 298         };
 299
 300         uart0_pins: pinmux_uart0_pins {
 301                 pinctrl-single,pins = <
 302                         AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)       /* uart0_rxd.uart0_rxd */
 303                         AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)    /* uart0_txd.uart0_txd */
 304                 >;
 305         };
 306
 307         clkout2_pin: pinmux_clkout2_pin {
 308                 pinctrl-single,pins = <
 309                         AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)    /* xdma_event_intr1.clkout2 */
 310                 >;
 311         };
 312
 313         ecap2_pins: backlight_pins {
 314                 pinctrl-single,pins = <
 315                         AM33XX_IOPAD(0x99c, MUX_MODE4)  /* mcasp0_ahclkr.ecap2_in_pwm2_out */
 316                 >;
 317         };
 318
 319         cpsw_default: cpsw_default {
 320                 pinctrl-single,pins = <
 321                         /* Slave 1 */
 322                         AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* mii1_txen.rgmii1_tctl */
 323                         AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* mii1_rxdv.rgmii1_rctl */
 324                         AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* mii1_txd3.rgmii1_td3 */
 325                         AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* mii1_txd2.rgmii1_td2 */
 326                         AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* mii1_txd1.rgmii1_td1 */
 327                         AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* mii1_txd0.rgmii1_td0 */
 328                         AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* mii1_txclk.rgmii1_tclk */
 329                         AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* mii1_rxclk.rgmii1_rclk */
 330                         AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* mii1_rxd3.rgmii1_rd3 */
 331                         AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* mii1_rxd2.rgmii1_rd2 */
 332                         AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* mii1_rxd1.rgmii1_rd1 */
 333                         AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* mii1_rxd0.rgmii1_rd0 */
 334
 335                         /* Slave 2 */
 336                         AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* gpmc_a0.rgmii2_tctl */
 337                         AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* gpmc_a1.rgmii2_rctl */
 338                         AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* gpmc_a2.rgmii2_td3 */
 339                         AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* gpmc_a3.rgmii2_td2 */
 340                         AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* gpmc_a4.rgmii2_td1 */
 341                         AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* gpmc_a5.rgmii2_td0 */
 342                         AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* gpmc_a6.rgmii2_tclk */
 343                         AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* gpmc_a7.rgmii2_rclk */
 344                         AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* gpmc_a8.rgmii2_rd3 */
 345                         AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* gpmc_a9.rgmii2_rd2 */
 346                         AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* gpmc_a10.rgmii2_rd1 */
 347                         AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* gpmc_a11.rgmii2_rd0 */
 348                 >;
 349         };
 350
 351         cpsw_sleep: cpsw_sleep {
 352                 pinctrl-single,pins = <
 353                         /* Slave 1 reset value */
 354                         AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
 355                         AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
 356                         AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 357                         AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
 358                         AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
 359                         AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
 360                         AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 361                         AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
 362                         AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
 363                         AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
 364                         AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 365                         AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
 366
 367                         /* Slave 2 reset value*/
 368                         AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
 369                         AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
 370                         AM33XX_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
 371                         AM33XX_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 372                         AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
 373                         AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
 374                         AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
 375                         AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 376                         AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
 377                         AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
 378                         AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
 379                         AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 380                 >;
 381         };
 382
 383         davinci_mdio_default: davinci_mdio_default {
 384                 pinctrl-single,pins = <
 385                         /* MDIO */
 386                         AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)       /* mdio_data.mdio_data */
 387                         AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)                      /* mdio_clk.mdio_clk */
 388                 >;
 389         };
 390
 391         davinci_mdio_sleep: davinci_mdio_sleep {
 392                 pinctrl-single,pins = <
 393                         /* MDIO reset value */
 394                         AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
 395                         AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 396                 >;
 397         };
 398
 399         mmc1_pins: pinmux_mmc1_pins {
 400                 pinctrl-single,pins = <
 401                         AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 402                 >;
 403         };
 404
 405         mcasp1_pins: mcasp1_pins {
 406                 pinctrl-single,pins = <
 407                         AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
 408                         AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
 409                         AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
 410                         AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
 411                 >;
 412         };
 413
 414         mcasp1_pins_sleep: mcasp1_pins_sleep {
 415                 pinctrl-single,pins = <
 416                         AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 417                         AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
 418                         AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
 419                         AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
 420                 >;
 421         };
 422
 423         mmc2_pins: pinmux_mmc2_pins {
 424                 pinctrl-single,pins = <
 425                         AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
 426                         AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
 427                         AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
 428                         AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
 429                         AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
 430                         AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
 431                         AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
 432                 >;
 433         };
 434
 435         wl12xx_gpio: pinmux_wl12xx_gpio {
 436                 pinctrl-single,pins = <
 437                         AM33XX_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
 438                 >;
 439         };
 440 };
 441
 442 &uart0 {
 443         pinctrl-names = "default";
 444         pinctrl-0 = <&uart0_pins>;
 445
 446         status = "okay";
 447 };
 448
 449 &i2c0 {
 450         pinctrl-names = "default";
 451         pinctrl-0 = <&i2c0_pins>;
 452
 453         status = "okay";
 454         clock-frequency = <400000>;
 455
 456         tps: tps@2d {
 457                 reg = <0x2d>;
 458         };
 459
 460         lis331dlh: lis331dlh@18 {
 461                 compatible = "st,lis331dlh", "st,lis3lv02d";
 462                 reg = <0x18>;
 463                 Vdd-supply = <&lis3_reg>;
 464                 Vdd_IO-supply = <&lis3_reg>;
 465
 466                 st,click-single-x;
 467                 st,click-single-y;
 468                 st,click-single-z;
 469                 st,click-thresh-x = <10>;
 470                 st,click-thresh-y = <10>;
 471                 st,click-thresh-z = <10>;
 472                 st,irq1-click;
 473                 st,irq2-click;
 474                 st,wakeup-x-lo;
 475                 st,wakeup-x-hi;
 476                 st,wakeup-y-lo;
 477                 st,wakeup-y-hi;
 478                 st,wakeup-z-lo;
 479                 st,wakeup-z-hi;
 480                 st,min-limit-x = <120>;
 481                 st,min-limit-y = <120>;
 482                 st,min-limit-z = <140>;
 483                 st,max-limit-x = <550>;
 484                 st,max-limit-y = <550>;
 485                 st,max-limit-z = <750>;
 486         };
 487
 488         tlv320aic3106: tlv320aic3106@1b {
 489                 #sound-dai-cells = <0>;
 490                 compatible = "ti,tlv320aic3106";
 491                 reg = <0x1b>;
 492                 status = "okay";
 493
 494                 /* Regulators */
 495                 AVDD-supply = <&vaux2_reg>;
 496                 IOVDD-supply = <&vaux2_reg>;
 497                 DRVDD-supply = <&vaux2_reg>;
 498                 DVDD-supply = <&vbat>;
 499         };
 500 };
 501
 502 &usb {
 503         status = "okay";
 504 };
 505
 506 &usb_ctrl_mod {
 507         status = "okay";
 508 };
 509
 510 &usb0_phy {
 511         status = "okay";
 512 };
 513
 514 &usb1_phy {
 515         status = "okay";
 516 };
 517
 518 &usb0 {
 519         status = "okay";
 520 };
 521
 522 &usb1 {
 523         status = "okay";
 524         dr_mode = "host";
 525 };
 526
 527 &cppi41dma  {
 528         status = "okay";
 529 };
 530
 531 &epwmss2 {
 532         status = "okay";
 533
 534         ecap2: ecap@48304100 {
 535                 status = "okay";
 536                 pinctrl-names = "default";
 537                 pinctrl-0 = <&ecap2_pins>;
 538         };
 539 };
 540
 541 #include "tps65910.dtsi"
 542
 543 &tps {
 544         vcc1-supply = <&vbat>;
 545         vcc2-supply = <&vbat>;
 546         vcc3-supply = <&vbat>;
 547         vcc4-supply = <&vbat>;
 548         vcc5-supply = <&vbat>;
 549         vcc6-supply = <&vbat>;
 550         vcc7-supply = <&vbat>;
 551         vccio-supply = <&vbat>;
 552
 553         regulators {
 554                 vrtc_reg: regulator@0 {
 555                         regulator-always-on;
 556                 };
 557
 558                 vio_reg: regulator@1 {
 559                         regulator-always-on;
 560                 };
 561
 562                 vdd1_reg: regulator@2 {
 563                         /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 564                         regulator-name = "vdd_mpu";
 565                         regulator-min-microvolt = <912500>;
 566                         regulator-max-microvolt = <1312500>;
 567                         regulator-boot-on;
 568                         regulator-always-on;
 569                 };
 570
 571                 vdd2_reg: regulator@3 {
 572                         /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
 573                         regulator-name = "vdd_core";
 574                         regulator-min-microvolt = <912500>;
 575                         regulator-max-microvolt = <1150000>;
 576                         regulator-boot-on;
 577                         regulator-always-on;
 578                 };
 579
 580                 vdd3_reg: regulator@4 {
 581                         regulator-always-on;
 582                 };
 583
 584                 vdig1_reg: regulator@5 {
 585                         regulator-always-on;
 586                 };
 587
 588                 vdig2_reg: regulator@6 {
 589                         regulator-always-on;
 590                 };
 591
 592                 vpll_reg: regulator@7 {
 593                         regulator-always-on;
 594                 };
 595
 596                 vdac_reg: regulator@8 {
 597                         regulator-always-on;
 598                 };
 599
 600                 vaux1_reg: regulator@9 {
 601                         regulator-always-on;
 602                 };
 603
 604                 vaux2_reg: regulator@10 {
 605                         regulator-always-on;
 606                 };
 607
 608                 vaux33_reg: regulator@11 {
 609                         regulator-always-on;
 610                 };
 611
 612                 vmmc_reg: regulator@12 {
 613                         regulator-min-microvolt = <1800000>;
 614                         regulator-max-microvolt = <3300000>;
 615                         regulator-always-on;
 616                 };
 617         };
 618 };
 619
 620 &mac {
 621         pinctrl-names = "default", "sleep";
 622         pinctrl-0 = <&cpsw_default>;
 623         pinctrl-1 = <&cpsw_sleep>;
 624         dual_emac = <1>;
 625         status = "okay";
 626 };
 627
 628 &davinci_mdio {
 629         pinctrl-names = "default", "sleep";
 630         pinctrl-0 = <&davinci_mdio_default>;
 631         pinctrl-1 = <&davinci_mdio_sleep>;
 632         status = "okay";
 633
 634         ethphy0: ethernet-phy@0 {
 635                 reg = <0>;
 636         };
 637
 638         ethphy1: ethernet-phy@1 {
 639                 reg = <1>;
 640         };
 641 };
 642
 643 &cpsw_emac0 {
 644         phy-handle = <&ethphy0>;
 645         phy-mode = "rgmii-id";
 646         dual_emac_res_vlan = <1>;
 647 };
 648
 649 &cpsw_emac1 {
 650         phy-handle = <&ethphy1>;
 651         phy-mode = "rgmii-id";
 652         dual_emac_res_vlan = <2>;
 653 };
 654
 655 &mmc1 {
 656         status = "okay";
 657         vmmc-supply = <&vmmc_reg>;
 658         bus-width = <4>;
 659         pinctrl-names = "default";
 660         pinctrl-0 = <&mmc1_pins>;
 661         cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 662 };
 663
 664 &sham {
 665         status = "okay";
 666 };
 667
 668 &aes {
 669         status = "okay";
 670 };
 671
 672 &gpio0 {
 673         ti,no-reset-on-init;
 674 };
 675
 676 &mmc2 {
 677         status = "okay";
 678         vmmc-supply = <&wl12xx_vmmc>;
 679         ti,non-removable;
 680         bus-width = <4>;
 681         cap-power-off-card;
 682         pinctrl-names = "default";
 683         pinctrl-0 = <&mmc2_pins>;
 684
 685         #address-cells = <1>;
 686         #size-cells = <0>;
 687         wlcore: wlcore@2 {
 688                 compatible = "ti,wl1271";
 689                 reg = <2>;
 690                 interrupt-parent = <&gpio0>;
 691                 interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; /* gpio 31 */
 692                 ref-clock-frequency = <38400000>;
 693         };
 694 };
 695
 696 &mcasp1 {
 697         #sound-dai-cells = <0>;
 698         pinctrl-names = "default", "sleep";
 699         pinctrl-0 = <&mcasp1_pins>;
 700         pinctrl-1 = <&mcasp1_pins_sleep>;
 701
 702         status = "okay";
 703
 704         op-mode = <0>;          /* MCASP_IIS_MODE */
 705         tdm-slots = <2>;
 706         /* 4 serializers */
 707         serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
 708                 0 0 1 2
 709         >;
 710         tx-num-evt = <32>;
 711         rx-num-evt = <32>;
 712 };
 713
 714 &tscadc {
 715         status = "okay";
 716         tsc {
 717                 ti,wires = <4>;
 718                 ti,x-plate-resistance = <200>;
 719                 ti,coordinate-readouts = <5>;
 720                 ti,wire-config = <0x00 0x11 0x22 0x33>;
 721         };
 722 };
 723
 724 &lcdc {
 725       status = "okay";
 726 };