arch/arm/dts/imx8mm-venice-gw7901.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Copyright 2020 Gateworks Corporation
   4  */
   5
   6 /dts-v1/;
   7
   8 #include <dt-bindings/gpio/gpio.h>
   9 #include <dt-bindings/input/linux-event-codes.h>
  10 #include <dt-bindings/leds/common.h>
  11 #include <dt-bindings/phy/phy-imx8-pcie.h>
  12
  13 #include "imx8mm.dtsi"
  14
  15 / {
  16         model = "Gateworks Venice GW7901 i.MX8MM board";
  17         compatible = "gw,imx8mm-gw7901", "fsl,imx8mm";
  18
  19         aliases {
  20                 ethernet0 = &fec1;
  21                 ethernet1 = &lan1;
  22                 ethernet2 = &lan2;
  23                 ethernet3 = &lan3;
  24                 ethernet4 = &lan4;
  25                 usb0 = &usbotg1;
  26                 usb1 = &usbotg2;
  27         };
  28
  29         chosen {
  30                 stdout-path = &uart2;
  31         };
  32
  33         memory@40000000 {
  34                 device_type = "memory";
  35                 reg = <0x0 0x40000000 0 0x80000000>;
  36         };
  37
  38         gpio-keys {
  39                 compatible = "gpio-keys";
  40
  41                 key-user-pb {
  42                         label = "user_pb";
  43                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  44                         linux,code = <BTN_0>;
  45                 };
  46
  47                 key-user-pb1x {
  48                         label = "user_pb1x";
  49                         linux,code = <BTN_1>;
  50                         interrupt-parent = <&gsc>;
  51                         interrupts = <0>;
  52                 };
  53
  54                 key-erased {
  55                         label = "key_erased";
  56                         linux,code = <BTN_2>;
  57                         interrupt-parent = <&gsc>;
  58                         interrupts = <1>;
  59                 };
  60
  61                 key-eeprom-wp {
  62                         label = "eeprom_wp";
  63                         linux,code = <BTN_3>;
  64                         interrupt-parent = <&gsc>;
  65                         interrupts = <2>;
  66                 };
  67
  68                 key-tamper {
  69                         label = "tamper";
  70                         linux,code = <BTN_4>;
  71                         interrupt-parent = <&gsc>;
  72                         interrupts = <5>;
  73                 };
  74
  75                 switch-hold {
  76                         label = "switch_hold";
  77                         linux,code = <BTN_5>;
  78                         interrupt-parent = <&gsc>;
  79                         interrupts = <7>;
  80                 };
  81         };
  82
  83         led-controller {
  84                 compatible = "gpio-leds";
  85
  86                 led-0 {
  87                         function = LED_FUNCTION_STATUS;
  88                         color = <LED_COLOR_ID_RED>;
  89                         label = "led01_red";
  90                         gpios = <&leds_gpio 0 GPIO_ACTIVE_HIGH>;
  91                         default-state = "off";
  92                 };
  93
  94                 led-1 {
  95                         function = LED_FUNCTION_STATUS;
  96                         color = <LED_COLOR_ID_GREEN>;
  97                         label = "led01_grn";
  98                         gpios = <&leds_gpio 1 GPIO_ACTIVE_HIGH>;
  99                         default-state = "off";
 100                 };
 101
 102                 led-2 {
 103                         function = LED_FUNCTION_STATUS;
 104                         color = <LED_COLOR_ID_RED>;
 105                         label = "led02_red";
 106                         gpios = <&leds_gpio 2 GPIO_ACTIVE_HIGH>;
 107                         default-state = "off";
 108                 };
 109
 110                 led-3 {
 111                         function = LED_FUNCTION_STATUS;
 112                         color = <LED_COLOR_ID_GREEN>;
 113                         label = "led02_grn";
 114                         gpios = <&leds_gpio 3 GPIO_ACTIVE_HIGH>;
 115                         default-state = "off";
 116                 };
 117
 118                 led-4 {
 119                         function = LED_FUNCTION_STATUS;
 120                         color = <LED_COLOR_ID_RED>;
 121                         label = "led03_red";
 122                         gpios = <&leds_gpio 4 GPIO_ACTIVE_HIGH>;
 123                         default-state = "off";
 124                 };
 125
 126                 led-5 {
 127                         function = LED_FUNCTION_STATUS;
 128                         color = <LED_COLOR_ID_GREEN>;
 129                         label = "led03_grn";
 130                         gpios = <&leds_gpio 5 GPIO_ACTIVE_HIGH>;
 131                         default-state = "off";
 132                 };
 133
 134                 led-6 {
 135                         function = LED_FUNCTION_STATUS;
 136                         color = <LED_COLOR_ID_RED>;
 137                         label = "led04_red";
 138                         gpios = <&leds_gpio 8 GPIO_ACTIVE_HIGH>;
 139                         default-state = "off";
 140                 };
 141
 142                 led-7 {
 143                         function = LED_FUNCTION_STATUS;
 144                         color = <LED_COLOR_ID_GREEN>;
 145                         label = "led04_grn";
 146                         gpios = <&leds_gpio 9 GPIO_ACTIVE_HIGH>;
 147                         default-state = "off";
 148                 };
 149
 150                 led-8 {
 151                         function = LED_FUNCTION_STATUS;
 152                         color = <LED_COLOR_ID_RED>;
 153                         label = "led05_red";
 154                         gpios = <&leds_gpio 10 GPIO_ACTIVE_HIGH>;
 155                         default-state = "off";
 156                 };
 157
 158                 led-9 {
 159                         function = LED_FUNCTION_STATUS;
 160                         color = <LED_COLOR_ID_GREEN>;
 161                         label = "led05_grn";
 162                         gpios = <&leds_gpio 11 GPIO_ACTIVE_HIGH>;
 163                         default-state = "off";
 164                 };
 165
 166                 led-a {
 167                         function = LED_FUNCTION_STATUS;
 168                         color = <LED_COLOR_ID_RED>;
 169                         label = "led06_red";
 170                         gpios = <&leds_gpio 12 GPIO_ACTIVE_HIGH>;
 171                         default-state = "off";
 172                 };
 173
 174                 led-b {
 175                         function = LED_FUNCTION_STATUS;
 176                         color = <LED_COLOR_ID_GREEN>;
 177                         label = "led06_grn";
 178                         gpios = <&leds_gpio 13 GPIO_ACTIVE_HIGH>;
 179                         default-state = "off";
 180                 };
 181         };
 182
 183         pcie0_refclk: pcie0-refclk {
 184                 compatible = "fixed-clock";
 185                 #clock-cells = <0>;
 186                 clock-frequency = <100000000>;
 187         };
 188
 189         reg_3p3v: regulator-3p3v {
 190                 compatible = "regulator-fixed";
 191                 regulator-name = "3P3V";
 192                 regulator-min-microvolt = <3300000>;
 193                 regulator-max-microvolt = <3300000>;
 194         };
 195
 196         regulator-ioexp {
 197                 pinctrl-names = "default";
 198                 pinctrl-0 = <&pinctrl_reg_ioexp>;
 199                 compatible = "regulator-fixed";
 200                 regulator-name = "ioexp";
 201                 gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
 202                 enable-active-high;
 203                 startup-delay-us = <100>;
 204                 regulator-min-microvolt = <3300000>;
 205                 regulator-max-microvolt = <3300000>;
 206                 regulator-always-on;
 207         };
 208
 209         regulator-isouart {
 210                 pinctrl-names = "default";
 211                 pinctrl-0 = <&pinctrl_reg_isouart>;
 212                 compatible = "regulator-fixed";
 213                 regulator-name = "iso_uart";
 214                 gpio = <&gpio1 13 GPIO_ACTIVE_LOW>;
 215                 startup-delay-us = <100>;
 216                 regulator-min-microvolt = <3300000>;
 217                 regulator-max-microvolt = <3300000>;
 218                 regulator-always-on;
 219         };
 220
 221         reg_usb2_vbus: regulator-usb2 {
 222                 pinctrl-names = "default";
 223                 pinctrl-0 = <&pinctrl_reg_usb2>;
 224                 compatible = "regulator-fixed";
 225                 regulator-name = "usb_usb2_vbus";
 226                 gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
 227                 enable-active-high;
 228                 regulator-min-microvolt = <5000000>;
 229                 regulator-max-microvolt = <5000000>;
 230         };
 231
 232         reg_wifi: regulator-wifi {
 233                 pinctrl-names = "default";
 234                 pinctrl-0 = <&pinctrl_reg_wl>;
 235                 compatible = "regulator-fixed";
 236                 regulator-name = "wifi";
 237                 gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>;
 238                 enable-active-high;
 239                 startup-delay-us = <100>;
 240                 regulator-min-microvolt = <3300000>;
 241                 regulator-max-microvolt = <3300000>;
 242         };
 243 };
 244
 245 &ddrc {
 246         operating-points-v2 = <&ddrc_opp_table>;
 247
 248         ddrc_opp_table: opp-table {
 249                 compatible = "operating-points-v2";
 250
 251                 opp-25M {
 252                         opp-hz = /bits/ 64 <25000000>;
 253                 };
 254
 255                 opp-100M {
 256                         opp-hz = /bits/ 64 <100000000>;
 257                 };
 258
 259                 opp-750M {
 260                         opp-hz = /bits/ 64 <750000000>;
 261                 };
 262         };
 263 };
 264
 265 &disp_blk_ctrl {
 266         status = "disabled";
 267 };
 268
 269 &ecspi1 {
 270         pinctrl-names = "default";
 271         pinctrl-0 = <&pinctrl_spi1>;
 272         cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
 273         status = "okay";
 274
 275         flash@0 {
 276                 compatible = "jedec,spi-nor";
 277                 reg = <0>;
 278                 spi-max-frequency = <40000000>;
 279                 status = "okay";
 280         };
 281 };
 282
 283 &fec1 {
 284         pinctrl-names = "default";
 285         pinctrl-0 = <&pinctrl_fec1>;
 286         phy-mode = "rgmii-id";
 287         local-mac-address = [00 00 00 00 00 00];
 288         status = "okay";
 289
 290         fixed-link {
 291                 speed = <1000>;
 292                 full-duplex;
 293         };
 294 };
 295
 296 &gpio1 {
 297         gpio-line-names = "uart1_rs422#", "", "", "uart1_rs485#",
 298                 "", "uart1_rs232#", "dig1_in", "dig1_out",
 299                 "", "", "", "", "", "", "", "",
 300                 "", "", "", "", "", "", "", "",
 301                 "", "", "", "", "", "", "", "";
 302 };
 303
 304 &gpio4 {
 305         gpio-line-names = "", "", "", "",
 306                 "", "", "uart3_rs232#", "uart3_rs422#",
 307                 "uart3_rs485#", "", "", "", "", "", "", "",
 308                 "", "", "", "", "", "", "", "",
 309                 "", "", "", "uart4_rs485#", "", "sim1det#", "sim2det#", "";
 310 };
 311
 312 &gpio5 {
 313         gpio-line-names = "", "", "", "dig2_out", "dig2_in", "sim2sel", "", "",
 314                 "", "", "uart4_rs232#", "", "", "uart4_rs422#", "", "",
 315                 "", "", "", "", "", "", "", "",
 316                 "", "", "", "", "", "", "", "";
 317 };
 318
 319 &gpu_2d {
 320         status = "disabled";
 321 };
 322
 323 &gpu_3d {
 324         status = "disabled";
 325 };
 326
 327 &i2c1 {
 328         clock-frequency = <100000>;
 329         pinctrl-names = "default", "gpio";
 330         pinctrl-0 = <&pinctrl_i2c1>;
 331         pinctrl-1 = <&pinctrl_i2c1_gpio>;
 332         scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 333         sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 334         status = "okay";
 335
 336         gsc: gsc@20 {
 337                 compatible = "gw,gsc";
 338                 reg = <0x20>;
 339                 pinctrl-0 = <&pinctrl_gsc>;
 340                 interrupt-parent = <&gpio4>;
 341                 interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
 342                 interrupt-controller;
 343                 #interrupt-cells = <1>;
 344
 345                 adc {
 346                         compatible = "gw,gsc-adc";
 347                         #address-cells = <1>;
 348                         #size-cells = <0>;
 349
 350                         channel@6 {
 351                                 gw,mode = <0>;
 352                                 reg = <0x06>;
 353                                 label = "temp";
 354                         };
 355
 356                         channel@8 {
 357                                 gw,mode = <1>;
 358                                 reg = <0x08>;
 359                                 label = "vdd_bat";
 360                         };
 361
 362                         channel@82 {
 363                                 gw,mode = <2>;
 364                                 reg = <0x82>;
 365                                 label = "vin_aux1";
 366                                 gw,voltage-divider-ohms = <22100 1000>;
 367                         };
 368
 369                         channel@84 {
 370                                 gw,mode = <2>;
 371                                 reg = <0x84>;
 372                                 label = "vin_aux2";
 373                                 gw,voltage-divider-ohms = <22100 1000>;
 374                         };
 375
 376                         channel@86 {
 377                                 gw,mode = <2>;
 378                                 reg = <0x86>;
 379                                 label = "vdd_vin";
 380                                 gw,voltage-divider-ohms = <22100 1000>;
 381                         };
 382
 383                         channel@88 {
 384                                 gw,mode = <2>;
 385                                 reg = <0x88>;
 386                                 label = "vdd_3p3";
 387                                 gw,voltage-divider-ohms = <10000 10000>;
 388                         };
 389
 390                         channel@8c {
 391                                 gw,mode = <2>;
 392                                 reg = <0x8c>;
 393                                 label = "vdd_2p5";
 394                                 gw,voltage-divider-ohms = <10000 10000>;
 395                         };
 396
 397                         channel@8e {
 398                                 gw,mode = <2>;
 399                                 reg = <0x8e>;
 400                                 label = "vdd_0p95";
 401                         };
 402
 403                         channel@90 {
 404                                 gw,mode = <2>;
 405                                 reg = <0x90>;
 406                                 label = "vdd_soc";
 407                         };
 408
 409                         channel@92 {
 410                                 gw,mode = <2>;
 411                                 reg = <0x92>;
 412                                 label = "vdd_arm";
 413                         };
 414
 415                         channel@98 {
 416                                 gw,mode = <2>;
 417                                 reg = <0x98>;
 418                                 label = "vdd_1p8";
 419                         };
 420
 421                         channel@9a {
 422                                 gw,mode = <2>;
 423                                 reg = <0x9a>;
 424                                 label = "vdd_1p2";
 425                         };
 426
 427                         channel@9c {
 428                                 gw,mode = <2>;
 429                                 reg = <0x9c>;
 430                                 label = "vdd_dram";
 431                         };
 432
 433                         channel@a2 {
 434                                 gw,mode = <2>;
 435                                 reg = <0xa2>;
 436                                 label = "vdd_gsc";
 437                                 gw,voltage-divider-ohms = <10000 10000>;
 438                         };
 439                 };
 440         };
 441
 442         gpio: gpio@23 {
 443                 compatible = "nxp,pca9555";
 444                 reg = <0x23>;
 445                 gpio-controller;
 446                 #gpio-cells = <2>;
 447                 interrupt-parent = <&gsc>;
 448                 interrupts = <4>;
 449         };
 450
 451         eeprom@50 {
 452                 compatible = "atmel,24c02";
 453                 reg = <0x50>;
 454                 pagesize = <16>;
 455         };
 456
 457         eeprom@51 {
 458                 compatible = "atmel,24c02";
 459                 reg = <0x51>;
 460                 pagesize = <16>;
 461         };
 462
 463         eeprom@52 {
 464                 compatible = "atmel,24c02";
 465                 reg = <0x52>;
 466                 pagesize = <16>;
 467         };
 468
 469         eeprom@53 {
 470                 compatible = "atmel,24c02";
 471                 reg = <0x53>;
 472                 pagesize = <16>;
 473         };
 474
 475         rtc@68 {
 476                 compatible = "dallas,ds1672";
 477                 reg = <0x68>;
 478         };
 479 };
 480
 481 &i2c2 {
 482         clock-frequency = <400000>;
 483         pinctrl-names = "default", "gpio";
 484         pinctrl-0 = <&pinctrl_i2c2>;
 485         pinctrl-1 = <&pinctrl_i2c2_gpio>;
 486         scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 487         sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 488         status = "okay";
 489
 490         pmic@4b {
 491                 compatible = "rohm,bd71847";
 492                 reg = <0x4b>;
 493                 pinctrl-names = "default";
 494                 pinctrl-0 = <&pinctrl_pmic>;
 495                 interrupt-parent = <&gpio3>;
 496                 interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
 497                 rohm,reset-snvs-powered;
 498                 #clock-cells = <0>;
 499                 clocks = <&osc_32k 0>;
 500                 clock-output-names = "clk-32k-out";
 501
 502                 regulators {
 503                         /* vdd_soc: 0.805-0.900V (typ=0.8V) */
 504                         BUCK1 {
 505                                 regulator-name = "buck1";
 506                                 regulator-min-microvolt = <700000>;
 507                                 regulator-max-microvolt = <1300000>;
 508                                 regulator-boot-on;
 509                                 regulator-always-on;
 510                                 regulator-ramp-delay = <1250>;
 511                         };
 512
 513                         /* vdd_arm: 0.805-1.0V (typ=0.9V) */
 514                         BUCK2 {
 515                                 regulator-name = "buck2";
 516                                 regulator-min-microvolt = <700000>;
 517                                 regulator-max-microvolt = <1300000>;
 518                                 regulator-boot-on;
 519                                 regulator-always-on;
 520                                 regulator-ramp-delay = <1250>;
 521                                 rohm,dvs-run-voltage = <1000000>;
 522                                 rohm,dvs-idle-voltage = <900000>;
 523                         };
 524
 525                         /* vdd_0p9: 0.805-1.0V (typ=0.9V) */
 526                         BUCK3 {
 527                                 regulator-name = "buck3";
 528                                 regulator-min-microvolt = <700000>;
 529                                 regulator-max-microvolt = <1350000>;
 530                                 regulator-boot-on;
 531                                 regulator-always-on;
 532                         };
 533
 534                         /* vdd_3p3 */
 535                         BUCK4 {
 536                                 regulator-name = "buck4";
 537                                 regulator-min-microvolt = <3000000>;
 538                                 regulator-max-microvolt = <3300000>;
 539                                 regulator-boot-on;
 540                                 regulator-always-on;
 541                         };
 542
 543                         /* vdd_1p8 */
 544                         BUCK5 {
 545                                 regulator-name = "buck5";
 546                                 regulator-min-microvolt = <1605000>;
 547                                 regulator-max-microvolt = <1995000>;
 548                                 regulator-boot-on;
 549                                 regulator-always-on;
 550                         };
 551
 552                         /* vdd_dram */
 553                         BUCK6 {
 554                                 regulator-name = "buck6";
 555                                 regulator-min-microvolt = <800000>;
 556                                 regulator-max-microvolt = <1400000>;
 557                                 regulator-boot-on;
 558                                 regulator-always-on;
 559                         };
 560
 561                         /* nvcc_snvs_1p8 */
 562                         LDO1 {
 563                                 regulator-name = "ldo1";
 564                                 regulator-min-microvolt = <1600000>;
 565                                 regulator-max-microvolt = <1900000>;
 566                                 regulator-boot-on;
 567                                 regulator-always-on;
 568                         };
 569
 570                         /* vdd_snvs_0p8 */
 571                         LDO2 {
 572                                 regulator-name = "ldo2";
 573                                 regulator-min-microvolt = <800000>;
 574                                 regulator-max-microvolt = <900000>;
 575                                 regulator-boot-on;
 576                                 regulator-always-on;
 577                         };
 578
 579                         /* vdda_1p8 */
 580                         LDO3 {
 581                                 regulator-name = "ldo3";
 582                                 regulator-min-microvolt = <1800000>;
 583                                 regulator-max-microvolt = <3300000>;
 584                                 regulator-boot-on;
 585                                 regulator-always-on;
 586                         };
 587
 588                         LDO4 {
 589                                 regulator-name = "ldo4";
 590                                 regulator-min-microvolt = <900000>;
 591                                 regulator-max-microvolt = <1800000>;
 592                                 regulator-boot-on;
 593                                 regulator-always-on;
 594                         };
 595
 596                         LDO6 {
 597                                 regulator-name = "ldo6";
 598                                 regulator-min-microvolt = <900000>;
 599                                 regulator-max-microvolt = <1800000>;
 600                                 regulator-boot-on;
 601                                 regulator-always-on;
 602                         };
 603                 };
 604         };
 605 };
 606
 607 &i2c3 {
 608         clock-frequency = <400000>;
 609         pinctrl-names = "default", "gpio";
 610         pinctrl-0 = <&pinctrl_i2c3>;
 611         pinctrl-1 = <&pinctrl_i2c3_gpio>;
 612         scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 613         sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 614         status = "okay";
 615
 616         leds_gpio: gpio@20 {
 617                 compatible = "nxp,pca9555";
 618                 reg = <0x20>;
 619                 gpio-controller;
 620                 #gpio-cells = <2>;
 621         };
 622
 623         switch: switch@5f {
 624                 compatible = "microchip,ksz9897";
 625                 reg = <0x5f>;
 626                 pinctrl-0 = <&pinctrl_ksz>;
 627                 interrupt-parent = <&gpio4>;
 628                 interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
 629                 phy-mode = "rgmii-id";
 630
 631                 ports {
 632                         #address-cells = <1>;
 633                         #size-cells = <0>;
 634
 635                         lan1: port@0 {
 636                                 reg = <0>;
 637                                 label = "lan1";
 638                                 phy-mode = "internal";
 639                                 local-mac-address = [00 00 00 00 00 00];
 640                         };
 641
 642                         lan2: port@1 {
 643                                 reg = <1>;
 644                                 label = "lan2";
 645                                 phy-mode = "internal";
 646                                 local-mac-address = [00 00 00 00 00 00];
 647                         };
 648
 649                         lan3: port@2 {
 650                                 reg = <2>;
 651                                 label = "lan3";
 652                                 phy-mode = "internal";
 653                                 local-mac-address = [00 00 00 00 00 00];
 654                         };
 655
 656                         lan4: port@3 {
 657                                 reg = <3>;
 658                                 label = "lan4";
 659                                 phy-mode = "internal";
 660                                 local-mac-address = [00 00 00 00 00 00];
 661                         };
 662
 663                         port@5 {
 664                                 reg = <5>;
 665                                 label = "cpu";
 666                                 ethernet = <&fec1>;
 667                                 phy-mode = "rgmii-id";
 668
 669                                 fixed-link {
 670                                         speed = <1000>;
 671                                         full-duplex;
 672                                 };
 673                         };
 674                 };
 675         };
 676
 677         crypto@60 {
 678                 compatible = "atmel,atecc508a";
 679                 reg = <0x60>;
 680         };
 681 };
 682
 683 &i2c4 {
 684         clock-frequency = <400000>;
 685         pinctrl-names = "default", "gpio";
 686         pinctrl-0 = <&pinctrl_i2c4>;
 687         pinctrl-1 = <&pinctrl_i2c4_gpio>;
 688         scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 689         sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 690         status = "okay";
 691 };
 692
 693 &pcie_phy {
 694         fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
 695         fsl,clkreq-unsupported;
 696         clocks = <&pcie0_refclk>;
 697         clock-names = "ref";
 698         status = "okay";
 699 };
 700
 701 &pcie0 {
 702         pinctrl-names = "default";
 703         pinctrl-0 = <&pinctrl_pcie0>;
 704         reset-gpio = <&gpio5 2 GPIO_ACTIVE_LOW>;
 705         clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
 706                  <&pcie0_refclk>;
 707         clock-names = "pcie", "pcie_aux", "pcie_bus";
 708         assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
 709                           <&clk IMX8MM_CLK_PCIE1_CTRL>;
 710         assigned-clock-rates = <10000000>, <250000000>;
 711         assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
 712                                  <&clk IMX8MM_SYS_PLL2_250M>;
 713         status = "okay";
 714 };
 715
 716 &pgc_gpu {
 717         status = "disabled";
 718 };
 719
 720 &pgc_gpumix {
 721         status = "disabled";
 722 };
 723
 724 &pgc_mipi {
 725         status = "disabled";
 726 };
 727
 728 &uart1 {
 729         pinctrl-names = "default";
 730         pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>;
 731         rts-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
 732         cts-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
 733         dtr-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 734         dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
 735         dcd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 736         uart-has-rtscts;
 737         status = "okay";
 738 };
 739
 740 /* console */
 741 &uart2 {
 742         pinctrl-names = "default";
 743         pinctrl-0 = <&pinctrl_uart2>;
 744         status = "okay";
 745 };
 746
 747 &uart3 {
 748         pinctrl-names = "default";
 749         pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
 750         cts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
 751         rts-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
 752         uart-has-rtscts;
 753         status = "okay";
 754 };
 755
 756 &uart4 {
 757         pinctrl-names = "default";
 758         pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_uart4_gpio>;
 759         cts-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
 760         rts-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
 761         uart-has-rtscts;
 762         status = "okay";
 763 };
 764
 765 &usbotg1 {
 766         dr_mode = "host";
 767         disable-over-current;
 768         status = "okay";
 769 };
 770
 771 &usbotg2 {
 772         dr_mode = "host";
 773         vbus-supply = <&reg_usb2_vbus>;
 774         status = "okay";
 775 };
 776
 777 /* SDIO WiFi */
 778 &usdhc1 {
 779         pinctrl-names = "default";
 780         pinctrl-0 = <&pinctrl_usdhc1>;
 781         bus-width = <4>;
 782         non-removable;
 783         vmmc-supply = <&reg_wifi>;
 784         status = "okay";
 785 };
 786
 787 /* microSD */
 788 &usdhc2 {
 789         pinctrl-names = "default", "state_100mhz", "state_200mhz";
 790         pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
 791         pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
 792         pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
 793         cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 794         bus-width = <4>;
 795         vmmc-supply = <&reg_3p3v>;
 796         status = "okay";
 797 };
 798
 799 /* eMMC */
 800 &usdhc3 {
 801         pinctrl-names = "default", "state_100mhz", "state_200mhz";
 802         pinctrl-0 = <&pinctrl_usdhc3>;
 803         pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 804         pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 805         bus-width = <8>;
 806         non-removable;
 807         status = "okay";
 808 };
 809
 810 &wdog1 {
 811         pinctrl-names = "default";
 812         pinctrl-0 = <&pinctrl_wdog>;
 813         fsl,ext-reset-output;
 814         status = "okay";
 815 };
 816
 817 &iomuxc {
 818         pinctrl-names = "default";
 819         pinctrl-0 = <&pinctrl_hog>;
 820
 821         pinctrl_hog: hoggrp {
 822                 fsl,pins = <
 823                         MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3         0x40000041 /* DIG2_OUT */
 824                         MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4         0x40000041 /* DIG2_IN */
 825                         MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6       0x40000041 /* DIG1_IN */
 826                         MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7       0x40000041 /* DIG1_OUT */
 827                         MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30        0x40000041 /* SIM2DET# */
 828                         MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29        0x40000041 /* SIM1DET# */
 829                         MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5    0x40000041 /* SIM2SEL */
 830                 >;
 831         };
 832
 833         pinctrl_fec1: fec1grp {
 834                 fsl,pins = <
 835                         MX8MM_IOMUXC_ENET_MDC_ENET1_MDC                 0x3
 836                         MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO               0x3
 837                         MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3           0x1f
 838                         MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2           0x1f
 839                         MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1           0x1f
 840                         MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0           0x1f
 841                         MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3           0x91
 842                         MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2           0x91
 843                         MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1           0x91
 844                         MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0           0x91
 845                         MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC           0x1f
 846                         MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC           0x91
 847                         MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL     0x91
 848                         MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL     0x1f
 849                         MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18               0x19 /* IRQ# */
 850                         MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19               0x19 /* RST# */
 851                 >;
 852         };
 853
 854         pinctrl_gsc: gscgrp {
 855                 fsl,pins = <
 856                         MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16       0x159
 857                 >;
 858         };
 859
 860         pinctrl_i2c1: i2c1grp {
 861                 fsl,pins = <
 862                         MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL          0x400001c3
 863                         MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA          0x400001c3
 864                 >;
 865         };
 866
 867         pinctrl_i2c1_gpio: i2c1gpiogrp {
 868                 fsl,pins = <
 869                         MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14        0x400001c3
 870                         MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15        0x400001c3
 871                 >;
 872         };
 873
 874         pinctrl_i2c2: i2c2grp {
 875                 fsl,pins = <
 876                         MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL          0x400001c3
 877                         MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA          0x400001c3
 878                 >;
 879         };
 880
 881         pinctrl_i2c2_gpio: i2c2gpiogrp {
 882                 fsl,pins = <
 883                         MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16        0x400001c3
 884                         MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17        0x400001c3
 885                 >;
 886         };
 887
 888         pinctrl_i2c3: i2c3grp {
 889                 fsl,pins = <
 890                         MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL          0x400001c3
 891                         MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA          0x400001c3
 892                 >;
 893         };
 894
 895         pinctrl_i2c3_gpio: i2c3gpiogrp {
 896                 fsl,pins = <
 897                         MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18        0x400001c3
 898                         MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19        0x400001c3
 899                 >;
 900         };
 901
 902         pinctrl_i2c4: i2c4grp {
 903                 fsl,pins = <
 904                         MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL          0x400001c3
 905                         MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA          0x400001c3
 906                 >;
 907         };
 908
 909         pinctrl_i2c4_gpio: i2c4gpiogrp {
 910                 fsl,pins = <
 911                         MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20        0x400001c3
 912                         MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21        0x400001c3
 913                 >;
 914         };
 915
 916         pinctrl_ksz: kszgrp {
 917                 fsl,pins = <
 918                         MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18       0x41
 919                         MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19       0x41 /* RST# */
 920                 >;
 921         };
 922
 923         pinctrl_pcie0: pciegrp {
 924                 fsl,pins = <
 925                         MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31       0x40000041 /* WDIS# */
 926                         MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2        0x41
 927                 >;
 928         };
 929
 930         pinctrl_pmic: pmicgrp {
 931                 fsl,pins = <
 932                         MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20        0x41
 933                 >;
 934         };
 935
 936         pinctrl_reg_isouart: regisouartgrp {
 937                 fsl,pins = <
 938                         MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13      0x40000041
 939                 >;
 940         };
 941
 942         pinctrl_reg_ioexp: regioexpgrp {
 943                 fsl,pins = <
 944                         MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21       0x40000041
 945                 >;
 946         };
 947
 948         pinctrl_reg_wl: regwlgrp {
 949                 fsl,pins = <
 950                         MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25       0x40000041
 951                 >;
 952         };
 953
 954         pinctrl_reg_usb2: regusb1grp {
 955                 fsl,pins = <
 956                         MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2        0x41
 957                         MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17       0x140
 958                         MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC     0x140
 959                 >;
 960         };
 961
 962         pinctrl_spi1: spi1grp {
 963                 fsl,pins = <
 964                         MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK    0x82
 965                         MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI    0x82
 966                         MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO    0x82
 967                         MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9       0x140
 968                 >;
 969         };
 970
 971         pinctrl_uart1: uart1grp {
 972                 fsl,pins = <
 973                         MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX     0x140
 974                         MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX     0x140
 975                         MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1       0x140
 976                         MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10      0x140
 977                         MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11      0x140
 978                         MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12      0x140
 979                         MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14      0x140
 980                 >;
 981         };
 982
 983         pinctrl_uart1_gpio: uart1gpiogrp {
 984                 fsl,pins = <
 985                         MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0       0x40000041 /* RS422# */
 986                         MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3       0x40000041 /* RS485# */
 987                         MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5       0x40000041 /* RS232# */
 988                 >;
 989         };
 990
 991         pinctrl_uart2: uart2grp {
 992                 fsl,pins = <
 993                         MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
 994                         MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
 995                 >;
 996         };
 997
 998         pinctrl_uart3: uart3grp {
 999                 fsl,pins = <
1000                         MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX     0x140
1001                         MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX     0x140
1002                         MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9        0x140
1003                         MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10       0x140
1004                 >;
1005         };
1006
1007         pinctrl_uart3_gpio: uart3gpiogrp {
1008                 fsl,pins = <
1009                         MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6        0x40000110 /* RS232# */
1010                         MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7        0x40000110 /* RS422# */
1011                         MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8        0x40000110 /* RS485# */
1012                 >;
1013         };
1014
1015         pinctrl_uart4: uart4grp {
1016                 fsl,pins = <
1017                         MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX     0x140
1018                         MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX     0x140
1019                         MX8MM_IOMUXC_ECSPI2_MOSI_GPIO5_IO11     0x140
1020                         MX8MM_IOMUXC_ECSPI2_MISO_GPIO5_IO12     0x140
1021                 >;
1022         };
1023
1024         pinctrl_uart4_gpio: uart4gpiogrp {
1025                 fsl,pins = <
1026
1027                         MX8MM_IOMUXC_ECSPI2_SCLK_GPIO5_IO10     0x40000041 /* RS232# */
1028                         MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13      0x40000041 /* RS422# */
1029                         MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27       0x40000041 /* RS485# */
1030                 >;
1031         };
1032
1033         pinctrl_usdhc1: usdhc1grp {
1034                 fsl,pins = <
1035                         MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK         0x190
1036                         MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD         0x1d0
1037                         MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0     0x1d0
1038                         MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1     0x1d0
1039                         MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2     0x1d0
1040                         MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3     0x1d0
1041                 >;
1042         };
1043
1044         pinctrl_usdhc2: usdhc2grp {
1045                 fsl,pins = <
1046                         MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK         0x190
1047                         MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD         0x1d0
1048                         MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0     0x1d0
1049                         MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1     0x1d0
1050                         MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2     0x1d0
1051                         MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3     0x1d0
1052                 >;
1053         };
1054
1055         pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
1056                 fsl,pins = <
1057                         MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK         0x194
1058                         MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD         0x1d4
1059                         MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0     0x1d4
1060                         MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1     0x1d4
1061                         MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2     0x1d4
1062                         MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3     0x1d4
1063                 >;
1064         };
1065
1066         pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
1067                 fsl,pins = <
1068                         MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK         0x196
1069                         MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD         0x1d6
1070                         MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0     0x1d6
1071                         MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1     0x1d6
1072                         MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2     0x1d6
1073                         MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3     0x1d6
1074                 >;
1075         };
1076
1077         pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
1078                 fsl,pins = <
1079                         MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12        0x1c4
1080                         MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT  0x1d0
1081                 >;
1082         };
1083
1084         pinctrl_usdhc3: usdhc3grp {
1085                 fsl,pins = <
1086                         MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK       0x190
1087                         MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD       0x1d0
1088                         MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0   0x1d0
1089                         MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1   0x1d0
1090                         MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2   0x1d0
1091                         MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3   0x1d0
1092                         MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4     0x1d0
1093                         MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5    0x1d0
1094                         MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6    0x1d0
1095                         MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7      0x1d0
1096                         MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE   0x190
1097                 >;
1098         };
1099
1100         pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
1101                 fsl,pins = <
1102                         MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK       0x194
1103                         MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD       0x1d4
1104                         MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0   0x1d4
1105                         MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1   0x1d4
1106                         MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2   0x1d4
1107                         MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3   0x1d4
1108                         MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4     0x1d4
1109                         MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5    0x1d4
1110                         MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6    0x1d4
1111                         MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7      0x1d4
1112                         MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE   0x194
1113                 >;
1114         };
1115
1116         pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
1117                 fsl,pins = <
1118                         MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK       0x196
1119                         MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD       0x1d6
1120                         MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0   0x1d6
1121                         MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1   0x1d6
1122                         MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2   0x1d6
1123                         MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3   0x1d6
1124                         MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4     0x1d6
1125                         MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5    0x1d6
1126                         MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6    0x1d6
1127                         MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7      0x1d6
1128                         MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE   0x196
1129                 >;
1130         };
1131
1132         pinctrl_wdog: wdoggrp {
1133                 fsl,pins = <
1134                         MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B    0xc6
1135                 >;
1136         };
1137 };