]> git.ipfire.org Git - people/ms/u-boot.git/blob - arch/arm/dts/sun8i-h3-orangepi-pc.dts
ARM: dts: dra7: Add supported MMC/SD modes in MMC dt nodes
[people/ms/u-boot.git] / arch / arm / dts / sun8i-h3-orangepi-pc.dts
1 /*
2 * Copyright (C) 2015 Chen-Yu Tsai <wens@csie.org>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
28 * conditions:
29 *
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
32 *
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43 /dts-v1/;
44 #include "sun8i-h3.dtsi"
45 #include "sunxi-common-regulators.dtsi"
46
47 #include <dt-bindings/gpio/gpio.h>
48 #include <dt-bindings/input/input.h>
49 #include <dt-bindings/pinctrl/sun4i-a10.h>
50
51 / {
52 model = "Xunlong Orange Pi PC";
53 compatible = "xunlong,orangepi-pc", "allwinner,sun8i-h3";
54
55 aliases {
56 serial0 = &uart0;
57 };
58
59 chosen {
60 stdout-path = "serial0:115200n8";
61 };
62
63 leds {
64 compatible = "gpio-leds";
65 pinctrl-names = "default";
66 pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
67
68 pwr_led {
69 label = "orangepi:green:pwr";
70 gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
71 default-state = "on";
72 };
73
74 status_led {
75 label = "orangepi:red:status";
76 gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
77 };
78 };
79
80 r_gpio_keys {
81 compatible = "gpio-keys";
82 pinctrl-names = "default";
83 pinctrl-0 = <&sw_r_opc>;
84
85 sw4 {
86 label = "sw4";
87 linux,code = <BTN_0>;
88 gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
89 };
90 };
91 };
92
93 &ehci1 {
94 status = "okay";
95 };
96
97 &ehci2 {
98 status = "okay";
99 };
100
101 &ehci3 {
102 status = "okay";
103 };
104
105 &ir {
106 pinctrl-names = "default";
107 pinctrl-0 = <&ir_pins_a>;
108 status = "okay";
109 };
110
111 &mmc0 {
112 pinctrl-names = "default";
113 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
114 vmmc-supply = <&reg_vcc3v3>;
115 bus-width = <4>;
116 cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
117 cd-inverted;
118 status = "okay";
119 };
120
121 &ohci1 {
122 status = "okay";
123 };
124
125 &ohci2 {
126 status = "okay";
127 };
128
129 &ohci3 {
130 status = "okay";
131 };
132
133 &pio {
134 leds_opc: led_pins@0 {
135 allwinner,pins = "PA15";
136 allwinner,function = "gpio_out";
137 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
138 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
139 };
140 };
141
142 &r_pio {
143 leds_r_opc: led_pins@0 {
144 allwinner,pins = "PL10";
145 allwinner,function = "gpio_out";
146 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
147 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
148 };
149
150 sw_r_opc: key_pins@0 {
151 allwinner,pins = "PL3";
152 allwinner,function = "gpio_in";
153 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
154 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
155 };
156 };
157
158 &uart0 {
159 pinctrl-names = "default";
160 pinctrl-0 = <&uart0_pins_a>;
161 status = "okay";
162 };
163
164 &usbphy {
165 /* USB VBUS is always on */
166 status = "okay";
167 };
168
169 &emac {
170 phy = <&phy1>;
171 phy-mode = "mii";
172 allwinner,use-internal-phy;
173 allwinner,leds-active-low;
174 status = "okay";
175 phy1: ethernet-phy@1 {
176 reg = <1>;
177 };
178 };