arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts

   1 /*
   2  * dts file for Xilinx ZynqMP zc1751-xm019-dc5
   3  *
   4  * (C) Copyright 2015, Xilinx, Inc.
   5  *
   6  * Siva Durga Prasad <siva.durga.paladugu@xilinx.com>
   7  * Michal Simek <michal.simek@xilinx.com>
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 /dts-v1/;
  13
  14 #include "zynqmp.dtsi"
  15 #include "zynqmp-clk.dtsi"
  16 / {
  17         model = "ZynqMP zc1751-xm019-dc5 RevA";
  18         compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
  19
  20         aliases {
  21                 ethernet0 = &gem1;
  22                 gpio0 = &gpio;
  23                 i2c0 = &i2c0;
  24                 i2c1 = &i2c1;
  25                 mmc0 = &sdhci0;
  26                 serial0 = &uart0;
  27                 serial1 = &uart1;
  28         };
  29
  30         chosen {
  31                 bootargs = "earlycon=cdns,mmio,0xff000000,115200n8";
  32                 stdout-path = "serial0:115200n8";
  33         };
  34
  35         memory@0 {
  36                 device_type = "memory";
  37                 reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
  38         };
  39 };
  40
  41 /* fpd_dma clk 667MHz, lpd_dma 500MHz */
  42 &fpd_dma_chan1 {
  43         status = "okay";
  44 };
  45
  46 &fpd_dma_chan2 {
  47         status = "okay";
  48 };
  49
  50 &fpd_dma_chan3 {
  51         status = "okay";
  52 };
  53
  54 &fpd_dma_chan4 {
  55         status = "okay";
  56 };
  57
  58 &fpd_dma_chan5 {
  59         status = "okay";
  60 };
  61
  62 &fpd_dma_chan6 {
  63         status = "okay";
  64 };
  65
  66 &fpd_dma_chan7 {
  67         status = "okay";
  68 };
  69
  70 &fpd_dma_chan8 {
  71         status = "okay";
  72 };
  73
  74 &gem1 {
  75         status = "okay";
  76         phy-handle = <&phy0>;
  77         phy-mode = "rgmii-id";
  78         phy0: phy@0 {
  79                 reg = <0>;
  80         };
  81 };
  82
  83 &gpio {
  84         status = "okay";
  85 };
  86
  87 /* FIXME: Add device */
  88 &i2c0 {
  89         status = "okay";
  90 };
  91
  92 /* FIXME: Add device */
  93 &i2c1 {
  94         status = "okay";
  95 };
  96
  97 &sdhci0 {
  98         status = "okay";
  99 };
 100
 101 &uart0 {
 102         status = "okay";
 103 };
 104
 105 &uart1 {
 106         status = "okay";
 107 };
 108
 109 &watchdog0 {
 110         status = "okay";
 111 };