arch/arm/mach-omap2/am33xx/Kconfig

   1 if AM33XX
   2
   3 choice
   4         prompt "AM33xx board select"
   5         optional
   6
   7 config TARGET_AM335X_EVM
   8         bool "Support am335x_evm"
   9         select BOARD_LATE_INIT
  10         select DM
  11         select DM_SERIAL
  12         select DM_GPIO
  13         select TI_I2C_BOARD_DETECT
  14         help
  15           This option specifies support for the AM335x
  16           GP and HS EVM development platforms. The AM335x
  17           GP EVM is a standalone test, development, and
  18           evaluation module system that enables developers
  19           to write software and develop hardware around
  20           an AM335x processor subsystem.
  21
  22 config TARGET_AM335X_BALTOS
  23         bool "Support am335x_baltos"
  24         select BOARD_LATE_INIT
  25         select DM
  26         select DM_SERIAL
  27         select DM_GPIO
  28
  29 config TARGET_AM335X_IGEP0033
  30         bool "Support am335x_igep0033"
  31         select DM
  32         select DM_SERIAL
  33         select DM_GPIO
  34
  35 config TARGET_AM335X_SHC
  36         bool "Support am335x based shc board from bosch"
  37         select BOARD_LATE_INIT
  38         select DM
  39         select DM_SERIAL
  40         select DM_GPIO
  41
  42 config TARGET_AM335X_SL50
  43         bool "Support am335x_sl50"
  44         select BOARD_LATE_INIT
  45         select DM
  46         select DM_SERIAL
  47         select DM_GPIO
  48
  49 config TARGET_BAV335X
  50         bool "Support bav335x"
  51         select BOARD_LATE_INIT
  52         select DM
  53         select DM_SERIAL
  54         help
  55           The BAV335x OEM Network Processor integrates all the functions of an
  56           embedded network computer in a small, easy to use SODIMM module which
  57           incorporates the popular Texas Instruments Sitara 32bit ARM Coretex-A8
  58           processor, with fast DDR3 512MB SDRAM, 4GB of embedded MMC and a Gigabit
  59           ethernet with simple connection to external connectors.
  60
  61           For more information, visit: http://birdland.com/oem
  62
  63 config TARGET_CM_T335
  64         bool "Support cm_t335"
  65         select DM
  66         select DM_SERIAL
  67         select DM_GPIO
  68
  69 config TARGET_PCM051
  70         bool "Support pcm051"
  71         select DM
  72         select DM_SERIAL
  73         select DM_GPIO
  74
  75 config TARGET_PENGWYN
  76         bool "Support pengwyn"
  77         select DM
  78         select DM_SERIAL
  79         select DM_GPIO
  80
  81 config TARGET_PEPPER
  82         bool "Support pepper"
  83         select DM
  84         select DM_SERIAL
  85         select DM_GPIO
  86
  87 endchoice
  88
  89 endif
  90
  91 if AM43XX
  92
  93 config SPL_EXT_SUPPORT
  94         default y
  95
  96 config SPL_GPIO_SUPPORT
  97         default y
  98
  99 config SPL_I2C_SUPPORT
 100         default y
 101
 102 config TARGET_AM43XX_EVM
 103         bool "Support am43xx_evm"
 104         select BOARD_LATE_INIT
 105         select TI_I2C_BOARD_DETECT
 106         help
 107           This option specifies support for the AM43xx
 108           GP and HS EVM development platforms.The AM437x
 109           GP EVM is a standalone test, development, and
 110           evaluation module system that enables developers
 111           to write software and develop hardware around
 112           an AM43xx processor subsystem.
 113 endif
 114
 115 if AM43XX || AM33XX
 116 config ISW_ENTRY_ADDR
 117         hex "Address in memory or XIP flash of bootloader entry point"
 118         help
 119           After any reset, the boot ROM on the AM43XX SOC
 120           searches the boot media for a valid boot image.
 121           For non-XIP devices, the ROM then copies the
 122           image into internal memory.
 123           For all boot modes, after the ROM processes the
 124           boot image it eventually computes the entry
 125           point address depending on the device type
 126           (secure/non-secure), boot media (xip/non-xip) and
 127           image headers.
 128         default 0x402F4000 if AM43XX
 129         default 0x402F0400 if AM33XX
 130
 131 config PUB_ROM_DATA_SIZE
 132         hex "Size in bytes of the L3 SRAM reserved by ROM to store data"
 133         help
 134           During the device boot, the public ROM uses the top of
 135           the public L3 OCMC RAM to store r/w data like stack,
 136           heap, globals etc. When the ROM is copying the boot
 137           image from the boot media into memory, the image must
 138           not spill over into this area. This value can be used
 139           during compile time to determine the maximum size of a
 140           boot image. Once the ROM transfers control to the boot
 141           image, this area is no longer used, and can be reclaimed
 142           for run time use by the boot image.
 143         default 0x8400
 144 endif