arch/arm/mach-tegra/Kconfig

   1 if TEGRA
   2
   3 config TEGRA_COMMON
   4         bool "Tegra common options"
   5         select DM
   6         select DM_ETH
   7         select DM_GPIO
   8         select DM_I2C
   9         select DM_KEYBOARD
  10         select DM_PCI
  11         select DM_PCI_COMPAT
  12         select DM_PWM
  13         select DM_SERIAL
  14         select DM_SPI
  15         select DM_SPI_FLASH
  16         select OF_CONTROL
  17         select VIDCONSOLE_AS_LCD if DM_VIDEO
  18
  19 config TEGRA_ARMV7_COMMON
  20         bool "Tegra 32-bit common options"
  21         select CPU_V7
  22         select SPL
  23         select SUPPORT_SPL
  24         select TEGRA_COMMON
  25         select TEGRA_GPIO
  26
  27 config TEGRA_ARMV8_COMMON
  28         bool "Tegra 64-bit common options"
  29         select ARM64
  30         select TEGRA_COMMON
  31
  32 choice
  33         prompt "Tegra SoC select"
  34         optional
  35
  36 config TEGRA20
  37         bool "Tegra20 family"
  38         select TEGRA_ARMV7_COMMON
  39
  40 config TEGRA30
  41         bool "Tegra30 family"
  42         select TEGRA_ARMV7_COMMON
  43
  44 config TEGRA114
  45         bool "Tegra114 family"
  46         select TEGRA_ARMV7_COMMON
  47
  48 config TEGRA124
  49         bool "Tegra124 family"
  50         select TEGRA_ARMV7_COMMON
  51
  52 config TEGRA210
  53         bool "Tegra210 family"
  54         select TEGRA_GPIO
  55         select TEGRA_ARMV8_COMMON
  56
  57 config TEGRA186
  58         bool "Tegra186 family"
  59         select DM_MAILBOX
  60         select TEGRA186_GPIO
  61         select TEGRA_ARMV8_COMMON
  62         select TEGRA_HSP
  63
  64 endchoice
  65
  66 config TEGRA_DISCONNECT_UDC_ON_BOOT
  67         bool "Disconnect USB device mode controller on boot"
  68         default y
  69         help
  70           When loading U-Boot into RAM over USB protocols using tools such as
  71           tegrarcm or L4T's exec-uboot.sh/tegraflash.py, Tegra's USB device
  72           mode controller is initialized and enumerated by the host PC running
  73           the tool. Unfortunately, these tools do not shut down the USB
  74           controller before executing the downloaded code, and so the host PC
  75           does not "de-enumerate" the USB device. This option shuts down the
  76           USB controller when U-Boot boots to avoid leaving a stale USB device
  77           present.
  78
  79 config SYS_MALLOC_F_LEN
  80         default 0x1800
  81
  82 source "arch/arm/mach-tegra/tegra20/Kconfig"
  83 source "arch/arm/mach-tegra/tegra30/Kconfig"
  84 source "arch/arm/mach-tegra/tegra114/Kconfig"
  85 source "arch/arm/mach-tegra/tegra124/Kconfig"
  86 source "arch/arm/mach-tegra/tegra210/Kconfig"
  87 source "arch/arm/mach-tegra/tegra186/Kconfig"
  88
  89 endif