]> git.ipfire.org Git - thirdparty/linux.git/blob - arch/arm/mach-u300/core.c
projects / thirdparty / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
ARM: delete struct sys_timer
[thirdparty/linux.git] / arch / arm / mach-u300 / core.c
1 /*
2 *
3 * arch/arm/mach-u300/core.c
4 *
5 *
6 * Copyright (C) 2007-2012 ST-Ericsson SA
7 * License terms: GNU General Public License (GPL) version 2
8 * Core platform support, IRQ handling and device definitions.
9 * Author: Linus Walleij <linus.walleij@stericsson.com>
10 */
11 #include <linux/kernel.h>
12 #include <linux/init.h>
13 #include <linux/spinlock.h>
14 #include <linux/interrupt.h>
15 #include <linux/bitops.h>
16 #include <linux/device.h>
17 #include <linux/mm.h>
18 #include <linux/termios.h>
19 #include <linux/dmaengine.h>
20 #include <linux/amba/bus.h>
21 #include <linux/amba/mmci.h>
22 #include <linux/amba/serial.h>
23 #include <linux/platform_device.h>
24 #include <linux/gpio.h>
25 #include <linux/clk.h>
26 #include <linux/err.h>
27 #include <linux/mtd/nand.h>
28 #include <linux/mtd/fsmc.h>
29 #include <linux/pinctrl/machine.h>
30 #include <linux/pinctrl/pinconf-generic.h>
31 #include <linux/dma-mapping.h>
32 #include <linux/platform_data/clk-u300.h>
33 #include <linux/platform_data/pinctrl-coh901.h>
34
35 #include <asm/types.h>
36 #include <asm/setup.h>
37 #include <asm/memory.h>
38 #include <asm/hardware/vic.h>
39 #include <asm/mach/map.h>
40 #include <asm/mach-types.h>
41 #include <asm/mach/arch.h>
42
43 #include <mach/coh901318.h>
44 #include <mach/hardware.h>
45 #include <mach/syscon.h>
46 #include <mach/irqs.h>
47
48 #include "timer.h"
49 #include "spi.h"
50 #include "i2c.h"
51 #include "u300-gpio.h"
52 #include "dma_channels.h"
53
54 /*
55 * Static I/O mappings that are needed for booting the U300 platforms. The
56 * only things we need are the areas where we find the timer, syscon and
57 * intcon, since the remaining device drivers will map their own memory
58 * physical to virtual as the need arise.
59 */
60 static struct map_desc u300_io_desc[] __initdata = {
61 {
62 .virtual = U300_SLOW_PER_VIRT_BASE,
63 .pfn = __phys_to_pfn(U300_SLOW_PER_PHYS_BASE),
64 .length = SZ_64K,
65 .type = MT_DEVICE,
66 },
67 {
68 .virtual = U300_AHB_PER_VIRT_BASE,
69 .pfn = __phys_to_pfn(U300_AHB_PER_PHYS_BASE),
70 .length = SZ_32K,
71 .type = MT_DEVICE,
72 },
73 {
74 .virtual = U300_FAST_PER_VIRT_BASE,
75 .pfn = __phys_to_pfn(U300_FAST_PER_PHYS_BASE),
76 .length = SZ_32K,
77 .type = MT_DEVICE,
78 },
79 };
80
81 static void __init u300_map_io(void)
82 {
83 iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc));
84 }
85
86 /*
87 * Declaration of devices found on the U300 board and
88 * their respective memory locations.
89 */
90
91 static struct amba_pl011_data uart0_plat_data = {
92 #ifdef CONFIG_COH901318
93 .dma_filter = coh901318_filter_id,
94 .dma_rx_param = (void *) U300_DMA_UART0_RX,
95 .dma_tx_param = (void *) U300_DMA_UART0_TX,
96 #endif
97 };
98
99 /* Slow device at 0x3000 offset */
100 static AMBA_APB_DEVICE(uart0, "uart0", 0, U300_UART0_BASE,
101 { IRQ_U300_UART0 }, &uart0_plat_data);
102
103 /* The U335 have an additional UART1 on the APP CPU */
104 static struct amba_pl011_data uart1_plat_data = {
105 #ifdef CONFIG_COH901318
106 .dma_filter = coh901318_filter_id,
107 .dma_rx_param = (void *) U300_DMA_UART1_RX,
108 .dma_tx_param = (void *) U300_DMA_UART1_TX,
109 #endif
110 };
111
112 /* Fast device at 0x7000 offset */
113 static AMBA_APB_DEVICE(uart1, "uart1", 0, U300_UART1_BASE,
114 { IRQ_U300_UART1 }, &uart1_plat_data);
115
116 /* AHB device at 0x4000 offset */
117 static AMBA_APB_DEVICE(pl172, "pl172", 0, U300_EMIF_CFG_BASE, { }, NULL);
118
119 /* Fast device at 0x6000 offset */
120 static AMBA_APB_DEVICE(pl022, "pl022", 0, U300_SPI_BASE,
121 { IRQ_U300_SPI }, NULL);
122
123 /* Fast device at 0x1000 offset */
124 #define U300_MMCSD_IRQS { IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 }
125
126 static struct mmci_platform_data mmcsd_platform_data = {
127 /*
128 * Do not set ocr_mask or voltage translation function,
129 * we have a regulator we can control instead.
130 */
131 .f_max = 24000000,
132 .gpio_wp = -1,
133 .gpio_cd = U300_GPIO_PIN_MMC_CD,
134 .cd_invert = true,
135 .capabilities = MMC_CAP_MMC_HIGHSPEED |
136 MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
137 #ifdef CONFIG_COH901318
138 .dma_filter = coh901318_filter_id,
139 .dma_rx_param = (void *) U300_DMA_MMCSD_RX_TX,
140 /* Don't specify a TX channel, this RX channel is bidirectional */
141 #endif
142 };
143
144 static AMBA_APB_DEVICE(mmcsd, "mmci", 0, U300_MMCSD_BASE,
145 U300_MMCSD_IRQS, &mmcsd_platform_data);
146
147 /*
148 * The order of device declaration may be important, since some devices
149 * have dependencies on other devices being initialized first.
150 */
151 static struct amba_device *amba_devs[] __initdata = {
152 &uart0_device,
153 &uart1_device,
154 &pl022_device,
155 &pl172_device,
156 &mmcsd_device,
157 };
158
159 /* Here follows a list of all hw resources that the platform devices
160 * allocate. Note, clock dependencies are not included
161 */
162
163 static struct resource gpio_resources[] = {
164 {
165 .start = U300_GPIO_BASE,
166 .end = (U300_GPIO_BASE + SZ_4K - 1),
167 .flags = IORESOURCE_MEM,
168 },
169 {
170 .name = "gpio0",
171 .start = IRQ_U300_GPIO_PORT0,
172 .end = IRQ_U300_GPIO_PORT0,
173 .flags = IORESOURCE_IRQ,
174 },
175 {
176 .name = "gpio1",
177 .start = IRQ_U300_GPIO_PORT1,
178 .end = IRQ_U300_GPIO_PORT1,
179 .flags = IORESOURCE_IRQ,
180 },
181 {
182 .name = "gpio2",
183 .start = IRQ_U300_GPIO_PORT2,
184 .end = IRQ_U300_GPIO_PORT2,
185 .flags = IORESOURCE_IRQ,
186 },
187 {
188 .name = "gpio3",
189 .start = IRQ_U300_GPIO_PORT3,
190 .end = IRQ_U300_GPIO_PORT3,
191 .flags = IORESOURCE_IRQ,
192 },
193 {
194 .name = "gpio4",
195 .start = IRQ_U300_GPIO_PORT4,
196 .end = IRQ_U300_GPIO_PORT4,
197 .flags = IORESOURCE_IRQ,
198 },
199 {
200 .name = "gpio5",
201 .start = IRQ_U300_GPIO_PORT5,
202 .end = IRQ_U300_GPIO_PORT5,
203 .flags = IORESOURCE_IRQ,
204 },
205 {
206 .name = "gpio6",
207 .start = IRQ_U300_GPIO_PORT6,
208 .end = IRQ_U300_GPIO_PORT6,
209 .flags = IORESOURCE_IRQ,
210 },
211 };
212
213 static struct resource keypad_resources[] = {
214 {
215 .start = U300_KEYPAD_BASE,
216 .end = U300_KEYPAD_BASE + SZ_4K - 1,
217 .flags = IORESOURCE_MEM,
218 },
219 {
220 .name = "coh901461-press",
221 .start = IRQ_U300_KEYPAD_KEYBF,
222 .end = IRQ_U300_KEYPAD_KEYBF,
223 .flags = IORESOURCE_IRQ,
224 },
225 {
226 .name = "coh901461-release",
227 .start = IRQ_U300_KEYPAD_KEYBR,
228 .end = IRQ_U300_KEYPAD_KEYBR,
229 .flags = IORESOURCE_IRQ,
230 },
231 };
232
233 static struct resource rtc_resources[] = {
234 {
235 .start = U300_RTC_BASE,
236 .end = U300_RTC_BASE + SZ_4K - 1,
237 .flags = IORESOURCE_MEM,
238 },
239 {
240 .start = IRQ_U300_RTC,
241 .end = IRQ_U300_RTC,
242 .flags = IORESOURCE_IRQ,
243 },
244 };
245
246 /*
247 * Fsmc does have IRQs: #43 and #44 (NFIF and NFIF2)
248 * but these are not yet used by the driver.
249 */
250 static struct resource fsmc_resources[] = {
251 {
252 .name = "nand_addr",
253 .start = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_ALE,
254 .end = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_ALE + SZ_16K - 1,
255 .flags = IORESOURCE_MEM,
256 },
257 {
258 .name = "nand_cmd",
259 .start = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_CLE,
260 .end = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_CLE + SZ_16K - 1,
261 .flags = IORESOURCE_MEM,
262 },
263 {
264 .name = "nand_data",
265 .start = U300_NAND_CS0_PHYS_BASE,
266 .end = U300_NAND_CS0_PHYS_BASE + SZ_16K - 1,
267 .flags = IORESOURCE_MEM,
268 },
269 {
270 .name = "fsmc_regs",
271 .start = U300_NAND_IF_PHYS_BASE,
272 .end = U300_NAND_IF_PHYS_BASE + SZ_4K - 1,
273 .flags = IORESOURCE_MEM,
274 },
275 };
276
277 static struct resource i2c0_resources[] = {
278 {
279 .start = U300_I2C0_BASE,
280 .end = U300_I2C0_BASE + SZ_4K - 1,
281 .flags = IORESOURCE_MEM,
282 },
283 {
284 .start = IRQ_U300_I2C0,
285 .end = IRQ_U300_I2C0,
286 .flags = IORESOURCE_IRQ,
287 },
288 };
289
290 static struct resource i2c1_resources[] = {
291 {
292 .start = U300_I2C1_BASE,
293 .end = U300_I2C1_BASE + SZ_4K - 1,
294 .flags = IORESOURCE_MEM,
295 },
296 {
297 .start = IRQ_U300_I2C1,
298 .end = IRQ_U300_I2C1,
299 .flags = IORESOURCE_IRQ,
300 },
301
302 };
303
304 static struct resource wdog_resources[] = {
305 {
306 .start = U300_WDOG_BASE,
307 .end = U300_WDOG_BASE + SZ_4K - 1,
308 .flags = IORESOURCE_MEM,
309 },
310 {
311 .start = IRQ_U300_WDOG,
312 .end = IRQ_U300_WDOG,
313 .flags = IORESOURCE_IRQ,
314 }
315 };
316
317 static struct resource dma_resource[] = {
318 {
319 .start = U300_DMAC_BASE,
320 .end = U300_DMAC_BASE + PAGE_SIZE - 1,
321 .flags = IORESOURCE_MEM,
322 },
323 {
324 .start = IRQ_U300_DMA,
325 .end = IRQ_U300_DMA,
326 .flags = IORESOURCE_IRQ,
327 }
328 };
329
330 /* points out all dma slave channels.
331 * Syntax is [A1, B1, A2, B2, .... ,-1,-1]
332 * Select all channels from A to B, end of list is marked with -1,-1
333 */
334 static int dma_slave_channels[] = {
335 U300_DMA_MSL_TX_0, U300_DMA_SPI_RX,
336 U300_DMA_UART1_TX, U300_DMA_UART1_RX, -1, -1};
337
338 /* points out all dma memcpy channels. */
339 static int dma_memcpy_channels[] = {
340 U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_8, -1, -1};
341
342 /** register dma for memory access
343 *
344 * active 1 means dma intends to access memory
345 * 0 means dma wont access memory
346 */
347 static void coh901318_access_memory_state(struct device *dev, bool active)
348 {
349 }
350
351 #define flags_memcpy_config (COH901318_CX_CFG_CH_DISABLE | \
352 COH901318_CX_CFG_RM_MEMORY_TO_MEMORY | \
353 COH901318_CX_CFG_LCR_DISABLE | \
354 COH901318_CX_CFG_TC_IRQ_ENABLE | \
355 COH901318_CX_CFG_BE_IRQ_ENABLE)
356 #define flags_memcpy_lli_chained (COH901318_CX_CTRL_TC_ENABLE | \
357 COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
358 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
359 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
360 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
361 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
362 COH901318_CX_CTRL_MASTER_MODE_M1RW | \
363 COH901318_CX_CTRL_TCP_DISABLE | \
364 COH901318_CX_CTRL_TC_IRQ_DISABLE | \
365 COH901318_CX_CTRL_HSP_DISABLE | \
366 COH901318_CX_CTRL_HSS_DISABLE | \
367 COH901318_CX_CTRL_DDMA_LEGACY | \
368 COH901318_CX_CTRL_PRDD_SOURCE)
369 #define flags_memcpy_lli (COH901318_CX_CTRL_TC_ENABLE | \
370 COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
371 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
372 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
373 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
374 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
375 COH901318_CX_CTRL_MASTER_MODE_M1RW | \
376 COH901318_CX_CTRL_TCP_DISABLE | \
377 COH901318_CX_CTRL_TC_IRQ_DISABLE | \
378 COH901318_CX_CTRL_HSP_DISABLE | \
379 COH901318_CX_CTRL_HSS_DISABLE | \
380 COH901318_CX_CTRL_DDMA_LEGACY | \
381 COH901318_CX_CTRL_PRDD_SOURCE)
382 #define flags_memcpy_lli_last (COH901318_CX_CTRL_TC_ENABLE | \
383 COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
384 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
385 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
386 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
387 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
388 COH901318_CX_CTRL_MASTER_MODE_M1RW | \
389 COH901318_CX_CTRL_TCP_DISABLE | \
390 COH901318_CX_CTRL_TC_IRQ_ENABLE | \
391 COH901318_CX_CTRL_HSP_DISABLE | \
392 COH901318_CX_CTRL_HSS_DISABLE | \
393 COH901318_CX_CTRL_DDMA_LEGACY | \
394 COH901318_CX_CTRL_PRDD_SOURCE)
395
396 const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
397 {
398 .number = U300_DMA_MSL_TX_0,
399 .name = "MSL TX 0",
400 .priority_high = 0,
401 .dev_addr = U300_MSL_BASE + 0 * 0x40 + 0x20,
402 },
403 {
404 .number = U300_DMA_MSL_TX_1,
405 .name = "MSL TX 1",
406 .priority_high = 0,
407 .dev_addr = U300_MSL_BASE + 1 * 0x40 + 0x20,
408 .param.config = COH901318_CX_CFG_CH_DISABLE |
409 COH901318_CX_CFG_LCR_DISABLE |
410 COH901318_CX_CFG_TC_IRQ_ENABLE |
411 COH901318_CX_CFG_BE_IRQ_ENABLE,
412 .param.ctrl_lli_chained = 0 |
413 COH901318_CX_CTRL_TC_ENABLE |
414 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
415 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
416 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
417 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
418 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
419 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
420 COH901318_CX_CTRL_TCP_DISABLE |
421 COH901318_CX_CTRL_TC_IRQ_DISABLE |
422 COH901318_CX_CTRL_HSP_ENABLE |
423 COH901318_CX_CTRL_HSS_DISABLE |
424 COH901318_CX_CTRL_DDMA_LEGACY |
425 COH901318_CX_CTRL_PRDD_SOURCE,
426 .param.ctrl_lli = 0 |
427 COH901318_CX_CTRL_TC_ENABLE |
428 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
429 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
430 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
431 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
432 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
433 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
434 COH901318_CX_CTRL_TCP_ENABLE |
435 COH901318_CX_CTRL_TC_IRQ_DISABLE |
436 COH901318_CX_CTRL_HSP_ENABLE |
437 COH901318_CX_CTRL_HSS_DISABLE |
438 COH901318_CX_CTRL_DDMA_LEGACY |
439 COH901318_CX_CTRL_PRDD_SOURCE,
440 .param.ctrl_lli_last = 0 |
441 COH901318_CX_CTRL_TC_ENABLE |
442 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
443 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
444 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
445 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
446 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
447 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
448 COH901318_CX_CTRL_TCP_ENABLE |
449 COH901318_CX_CTRL_TC_IRQ_ENABLE |
450 COH901318_CX_CTRL_HSP_ENABLE |
451 COH901318_CX_CTRL_HSS_DISABLE |
452 COH901318_CX_CTRL_DDMA_LEGACY |
453 COH901318_CX_CTRL_PRDD_SOURCE,
454 },
455 {
456 .number = U300_DMA_MSL_TX_2,
457 .name = "MSL TX 2",
458 .priority_high = 0,
459 .dev_addr = U300_MSL_BASE + 2 * 0x40 + 0x20,
460 .param.config = COH901318_CX_CFG_CH_DISABLE |
461 COH901318_CX_CFG_LCR_DISABLE |
462 COH901318_CX_CFG_TC_IRQ_ENABLE |
463 COH901318_CX_CFG_BE_IRQ_ENABLE,
464 .param.ctrl_lli_chained = 0 |
465 COH901318_CX_CTRL_TC_ENABLE |
466 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
467 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
468 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
469 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
470 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
471 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
472 COH901318_CX_CTRL_TCP_DISABLE |
473 COH901318_CX_CTRL_TC_IRQ_DISABLE |
474 COH901318_CX_CTRL_HSP_ENABLE |
475 COH901318_CX_CTRL_HSS_DISABLE |
476 COH901318_CX_CTRL_DDMA_LEGACY |
477 COH901318_CX_CTRL_PRDD_SOURCE,
478 .param.ctrl_lli = 0 |
479 COH901318_CX_CTRL_TC_ENABLE |
480 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
481 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
482 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
483 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
484 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
485 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
486 COH901318_CX_CTRL_TCP_ENABLE |
487 COH901318_CX_CTRL_TC_IRQ_DISABLE |
488 COH901318_CX_CTRL_HSP_ENABLE |
489 COH901318_CX_CTRL_HSS_DISABLE |
490 COH901318_CX_CTRL_DDMA_LEGACY |
491 COH901318_CX_CTRL_PRDD_SOURCE,
492 .param.ctrl_lli_last = 0 |
493 COH901318_CX_CTRL_TC_ENABLE |
494 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
495 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
496 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
497 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
498 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
499 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
500 COH901318_CX_CTRL_TCP_ENABLE |
501 COH901318_CX_CTRL_TC_IRQ_ENABLE |
502 COH901318_CX_CTRL_HSP_ENABLE |
503 COH901318_CX_CTRL_HSS_DISABLE |
504 COH901318_CX_CTRL_DDMA_LEGACY |
505 COH901318_CX_CTRL_PRDD_SOURCE,
506 .desc_nbr_max = 10,
507 },
508 {
509 .number = U300_DMA_MSL_TX_3,
510 .name = "MSL TX 3",
511 .priority_high = 0,
512 .dev_addr = U300_MSL_BASE + 3 * 0x40 + 0x20,
513 .param.config = COH901318_CX_CFG_CH_DISABLE |
514 COH901318_CX_CFG_LCR_DISABLE |
515 COH901318_CX_CFG_TC_IRQ_ENABLE |
516 COH901318_CX_CFG_BE_IRQ_ENABLE,
517 .param.ctrl_lli_chained = 0 |
518 COH901318_CX_CTRL_TC_ENABLE |
519 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
520 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
521 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
522 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
523 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
524 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
525 COH901318_CX_CTRL_TCP_DISABLE |
526 COH901318_CX_CTRL_TC_IRQ_DISABLE |
527 COH901318_CX_CTRL_HSP_ENABLE |
528 COH901318_CX_CTRL_HSS_DISABLE |
529 COH901318_CX_CTRL_DDMA_LEGACY |
530 COH901318_CX_CTRL_PRDD_SOURCE,
531 .param.ctrl_lli = 0 |
532 COH901318_CX_CTRL_TC_ENABLE |
533 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
534 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
535 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
536 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
537 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
538 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
539 COH901318_CX_CTRL_TCP_ENABLE |
540 COH901318_CX_CTRL_TC_IRQ_DISABLE |
541 COH901318_CX_CTRL_HSP_ENABLE |
542 COH901318_CX_CTRL_HSS_DISABLE |
543 COH901318_CX_CTRL_DDMA_LEGACY |
544 COH901318_CX_CTRL_PRDD_SOURCE,
545 .param.ctrl_lli_last = 0 |
546 COH901318_CX_CTRL_TC_ENABLE |
547 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
548 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
549 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
550 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
551 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
552 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
553 COH901318_CX_CTRL_TCP_ENABLE |
554 COH901318_CX_CTRL_TC_IRQ_ENABLE |
555 COH901318_CX_CTRL_HSP_ENABLE |
556 COH901318_CX_CTRL_HSS_DISABLE |
557 COH901318_CX_CTRL_DDMA_LEGACY |
558 COH901318_CX_CTRL_PRDD_SOURCE,
559 },
560 {
561 .number = U300_DMA_MSL_TX_4,
562 .name = "MSL TX 4",
563 .priority_high = 0,
564 .dev_addr = U300_MSL_BASE + 4 * 0x40 + 0x20,
565 .param.config = COH901318_CX_CFG_CH_DISABLE |
566 COH901318_CX_CFG_LCR_DISABLE |
567 COH901318_CX_CFG_TC_IRQ_ENABLE |
568 COH901318_CX_CFG_BE_IRQ_ENABLE,
569 .param.ctrl_lli_chained = 0 |
570 COH901318_CX_CTRL_TC_ENABLE |
571 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
572 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
573 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
574 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
575 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
576 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
577 COH901318_CX_CTRL_TCP_DISABLE |
578 COH901318_CX_CTRL_TC_IRQ_DISABLE |
579 COH901318_CX_CTRL_HSP_ENABLE |
580 COH901318_CX_CTRL_HSS_DISABLE |
581 COH901318_CX_CTRL_DDMA_LEGACY |
582 COH901318_CX_CTRL_PRDD_SOURCE,
583 .param.ctrl_lli = 0 |
584 COH901318_CX_CTRL_TC_ENABLE |
585 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
586 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
587 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
588 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
589 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
590 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
591 COH901318_CX_CTRL_TCP_ENABLE |
592 COH901318_CX_CTRL_TC_IRQ_DISABLE |
593 COH901318_CX_CTRL_HSP_ENABLE |
594 COH901318_CX_CTRL_HSS_DISABLE |
595 COH901318_CX_CTRL_DDMA_LEGACY |
596 COH901318_CX_CTRL_PRDD_SOURCE,
597 .param.ctrl_lli_last = 0 |
598 COH901318_CX_CTRL_TC_ENABLE |
599 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
600 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
601 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
602 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
603 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
604 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
605 COH901318_CX_CTRL_TCP_ENABLE |
606 COH901318_CX_CTRL_TC_IRQ_ENABLE |
607 COH901318_CX_CTRL_HSP_ENABLE |
608 COH901318_CX_CTRL_HSS_DISABLE |
609 COH901318_CX_CTRL_DDMA_LEGACY |
610 COH901318_CX_CTRL_PRDD_SOURCE,
611 },
612 {
613 .number = U300_DMA_MSL_TX_5,
614 .name = "MSL TX 5",
615 .priority_high = 0,
616 .dev_addr = U300_MSL_BASE + 5 * 0x40 + 0x20,
617 },
618 {
619 .number = U300_DMA_MSL_TX_6,
620 .name = "MSL TX 6",
621 .priority_high = 0,
622 .dev_addr = U300_MSL_BASE + 6 * 0x40 + 0x20,
623 },
624 {
625 .number = U300_DMA_MSL_RX_0,
626 .name = "MSL RX 0",
627 .priority_high = 0,
628 .dev_addr = U300_MSL_BASE + 0 * 0x40 + 0x220,
629 },
630 {
631 .number = U300_DMA_MSL_RX_1,
632 .name = "MSL RX 1",
633 .priority_high = 0,
634 .dev_addr = U300_MSL_BASE + 1 * 0x40 + 0x220,
635 .param.config = COH901318_CX_CFG_CH_DISABLE |
636 COH901318_CX_CFG_LCR_DISABLE |
637 COH901318_CX_CFG_TC_IRQ_ENABLE |
638 COH901318_CX_CFG_BE_IRQ_ENABLE,
639 .param.ctrl_lli_chained = 0 |
640 COH901318_CX_CTRL_TC_ENABLE |
641 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
642 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
643 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
644 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
645 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
646 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
647 COH901318_CX_CTRL_TCP_DISABLE |
648 COH901318_CX_CTRL_TC_IRQ_DISABLE |
649 COH901318_CX_CTRL_HSP_ENABLE |
650 COH901318_CX_CTRL_HSS_DISABLE |
651 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
652 COH901318_CX_CTRL_PRDD_DEST,
653 .param.ctrl_lli = 0,
654 .param.ctrl_lli_last = 0 |
655 COH901318_CX_CTRL_TC_ENABLE |
656 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
657 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
658 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
659 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
660 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
661 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
662 COH901318_CX_CTRL_TCP_DISABLE |
663 COH901318_CX_CTRL_TC_IRQ_ENABLE |
664 COH901318_CX_CTRL_HSP_ENABLE |
665 COH901318_CX_CTRL_HSS_DISABLE |
666 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
667 COH901318_CX_CTRL_PRDD_DEST,
668 },
669 {
670 .number = U300_DMA_MSL_RX_2,
671 .name = "MSL RX 2",
672 .priority_high = 0,
673 .dev_addr = U300_MSL_BASE + 2 * 0x40 + 0x220,
674 .param.config = COH901318_CX_CFG_CH_DISABLE |
675 COH901318_CX_CFG_LCR_DISABLE |
676 COH901318_CX_CFG_TC_IRQ_ENABLE |
677 COH901318_CX_CFG_BE_IRQ_ENABLE,
678 .param.ctrl_lli_chained = 0 |
679 COH901318_CX_CTRL_TC_ENABLE |
680 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
681 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
682 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
683 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
684 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
685 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
686 COH901318_CX_CTRL_TCP_DISABLE |
687 COH901318_CX_CTRL_TC_IRQ_DISABLE |
688 COH901318_CX_CTRL_HSP_ENABLE |
689 COH901318_CX_CTRL_HSS_DISABLE |
690 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
691 COH901318_CX_CTRL_PRDD_DEST,
692 .param.ctrl_lli = 0 |
693 COH901318_CX_CTRL_TC_ENABLE |
694 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
695 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
696 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
697 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
698 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
699 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
700 COH901318_CX_CTRL_TCP_DISABLE |
701 COH901318_CX_CTRL_TC_IRQ_ENABLE |
702 COH901318_CX_CTRL_HSP_ENABLE |
703 COH901318_CX_CTRL_HSS_DISABLE |
704 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
705 COH901318_CX_CTRL_PRDD_DEST,
706 .param.ctrl_lli_last = 0 |
707 COH901318_CX_CTRL_TC_ENABLE |
708 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
709 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
710 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
711 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
712 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
713 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
714 COH901318_CX_CTRL_TCP_DISABLE |
715 COH901318_CX_CTRL_TC_IRQ_ENABLE |
716 COH901318_CX_CTRL_HSP_ENABLE |
717 COH901318_CX_CTRL_HSS_DISABLE |
718 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
719 COH901318_CX_CTRL_PRDD_DEST,
720 },
721 {
722 .number = U300_DMA_MSL_RX_3,
723 .name = "MSL RX 3",
724 .priority_high = 0,
725 .dev_addr = U300_MSL_BASE + 3 * 0x40 + 0x220,
726 .param.config = COH901318_CX_CFG_CH_DISABLE |
727 COH901318_CX_CFG_LCR_DISABLE |
728 COH901318_CX_CFG_TC_IRQ_ENABLE |
729 COH901318_CX_CFG_BE_IRQ_ENABLE,
730 .param.ctrl_lli_chained = 0 |
731 COH901318_CX_CTRL_TC_ENABLE |
732 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
733 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
734 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
735 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
736 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
737 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
738 COH901318_CX_CTRL_TCP_DISABLE |
739 COH901318_CX_CTRL_TC_IRQ_DISABLE |
740 COH901318_CX_CTRL_HSP_ENABLE |
741 COH901318_CX_CTRL_HSS_DISABLE |
742 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
743 COH901318_CX_CTRL_PRDD_DEST,
744 .param.ctrl_lli = 0 |
745 COH901318_CX_CTRL_TC_ENABLE |
746 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
747 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
748 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
749 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
750 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
751 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
752 COH901318_CX_CTRL_TCP_DISABLE |
753 COH901318_CX_CTRL_TC_IRQ_ENABLE |
754 COH901318_CX_CTRL_HSP_ENABLE |
755 COH901318_CX_CTRL_HSS_DISABLE |
756 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
757 COH901318_CX_CTRL_PRDD_DEST,
758 .param.ctrl_lli_last = 0 |
759 COH901318_CX_CTRL_TC_ENABLE |
760 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
761 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
762 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
763 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
764 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
765 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
766 COH901318_CX_CTRL_TCP_DISABLE |
767 COH901318_CX_CTRL_TC_IRQ_ENABLE |
768 COH901318_CX_CTRL_HSP_ENABLE |
769 COH901318_CX_CTRL_HSS_DISABLE |
770 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
771 COH901318_CX_CTRL_PRDD_DEST,
772 },
773 {
774 .number = U300_DMA_MSL_RX_4,
775 .name = "MSL RX 4",
776 .priority_high = 0,
777 .dev_addr = U300_MSL_BASE + 4 * 0x40 + 0x220,
778 .param.config = COH901318_CX_CFG_CH_DISABLE |
779 COH901318_CX_CFG_LCR_DISABLE |
780 COH901318_CX_CFG_TC_IRQ_ENABLE |
781 COH901318_CX_CFG_BE_IRQ_ENABLE,
782 .param.ctrl_lli_chained = 0 |
783 COH901318_CX_CTRL_TC_ENABLE |
784 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
785 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
786 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
787 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
788 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
789 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
790 COH901318_CX_CTRL_TCP_DISABLE |
791 COH901318_CX_CTRL_TC_IRQ_DISABLE |
792 COH901318_CX_CTRL_HSP_ENABLE |
793 COH901318_CX_CTRL_HSS_DISABLE |
794 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
795 COH901318_CX_CTRL_PRDD_DEST,
796 .param.ctrl_lli = 0 |
797 COH901318_CX_CTRL_TC_ENABLE |
798 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
799 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
800 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
801 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
802 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
803 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
804 COH901318_CX_CTRL_TCP_DISABLE |
805 COH901318_CX_CTRL_TC_IRQ_ENABLE |
806 COH901318_CX_CTRL_HSP_ENABLE |
807 COH901318_CX_CTRL_HSS_DISABLE |
808 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
809 COH901318_CX_CTRL_PRDD_DEST,
810 .param.ctrl_lli_last = 0 |
811 COH901318_CX_CTRL_TC_ENABLE |
812 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
813 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
814 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
815 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
816 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
817 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
818 COH901318_CX_CTRL_TCP_DISABLE |
819 COH901318_CX_CTRL_TC_IRQ_ENABLE |
820 COH901318_CX_CTRL_HSP_ENABLE |
821 COH901318_CX_CTRL_HSS_DISABLE |
822 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
823 COH901318_CX_CTRL_PRDD_DEST,
824 },
825 {
826 .number = U300_DMA_MSL_RX_5,
827 .name = "MSL RX 5",
828 .priority_high = 0,
829 .dev_addr = U300_MSL_BASE + 5 * 0x40 + 0x220,
830 .param.config = COH901318_CX_CFG_CH_DISABLE |
831 COH901318_CX_CFG_LCR_DISABLE |
832 COH901318_CX_CFG_TC_IRQ_ENABLE |
833 COH901318_CX_CFG_BE_IRQ_ENABLE,
834 .param.ctrl_lli_chained = 0 |
835 COH901318_CX_CTRL_TC_ENABLE |
836 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
837 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
838 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
839 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
840 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
841 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
842 COH901318_CX_CTRL_TCP_DISABLE |
843 COH901318_CX_CTRL_TC_IRQ_DISABLE |
844 COH901318_CX_CTRL_HSP_ENABLE |
845 COH901318_CX_CTRL_HSS_DISABLE |
846 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
847 COH901318_CX_CTRL_PRDD_DEST,
848 .param.ctrl_lli = 0 |
849 COH901318_CX_CTRL_TC_ENABLE |
850 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
851 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
852 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
853 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
854 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
855 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
856 COH901318_CX_CTRL_TCP_DISABLE |
857 COH901318_CX_CTRL_TC_IRQ_ENABLE |
858 COH901318_CX_CTRL_HSP_ENABLE |
859 COH901318_CX_CTRL_HSS_DISABLE |
860 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
861 COH901318_CX_CTRL_PRDD_DEST,
862 .param.ctrl_lli_last = 0 |
863 COH901318_CX_CTRL_TC_ENABLE |
864 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
865 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
866 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
867 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
868 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
869 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
870 COH901318_CX_CTRL_TCP_DISABLE |
871 COH901318_CX_CTRL_TC_IRQ_ENABLE |
872 COH901318_CX_CTRL_HSP_ENABLE |
873 COH901318_CX_CTRL_HSS_DISABLE |
874 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
875 COH901318_CX_CTRL_PRDD_DEST,
876 },
877 {
878 .number = U300_DMA_MSL_RX_6,
879 .name = "MSL RX 6",
880 .priority_high = 0,
881 .dev_addr = U300_MSL_BASE + 6 * 0x40 + 0x220,
882 },
883 /*
884 * Don't set up device address, burst count or size of src
885 * or dst bus for this peripheral - handled by PrimeCell
886 * DMA extension.
887 */
888 {
889 .number = U300_DMA_MMCSD_RX_TX,
890 .name = "MMCSD RX TX",
891 .priority_high = 0,
892 .param.config = COH901318_CX_CFG_CH_DISABLE |
893 COH901318_CX_CFG_LCR_DISABLE |
894 COH901318_CX_CFG_TC_IRQ_ENABLE |
895 COH901318_CX_CFG_BE_IRQ_ENABLE,
896 .param.ctrl_lli_chained = 0 |
897 COH901318_CX_CTRL_TC_ENABLE |
898 COH901318_CX_CTRL_MASTER_MODE_M1RW |
899 COH901318_CX_CTRL_TCP_ENABLE |
900 COH901318_CX_CTRL_TC_IRQ_DISABLE |
901 COH901318_CX_CTRL_HSP_ENABLE |
902 COH901318_CX_CTRL_HSS_DISABLE |
903 COH901318_CX_CTRL_DDMA_LEGACY,
904 .param.ctrl_lli = 0 |
905 COH901318_CX_CTRL_TC_ENABLE |
906 COH901318_CX_CTRL_MASTER_MODE_M1RW |
907 COH901318_CX_CTRL_TCP_ENABLE |
908 COH901318_CX_CTRL_TC_IRQ_DISABLE |
909 COH901318_CX_CTRL_HSP_ENABLE |
910 COH901318_CX_CTRL_HSS_DISABLE |
911 COH901318_CX_CTRL_DDMA_LEGACY,
912 .param.ctrl_lli_last = 0 |
913 COH901318_CX_CTRL_TC_ENABLE |
914 COH901318_CX_CTRL_MASTER_MODE_M1RW |
915 COH901318_CX_CTRL_TCP_DISABLE |
916 COH901318_CX_CTRL_TC_IRQ_ENABLE |
917 COH901318_CX_CTRL_HSP_ENABLE |
918 COH901318_CX_CTRL_HSS_DISABLE |
919 COH901318_CX_CTRL_DDMA_LEGACY,
920
921 },
922 {
923 .number = U300_DMA_MSPRO_TX,
924 .name = "MSPRO TX",
925 .priority_high = 0,
926 },
927 {
928 .number = U300_DMA_MSPRO_RX,
929 .name = "MSPRO RX",
930 .priority_high = 0,
931 },
932 /*
933 * Don't set up device address, burst count or size of src
934 * or dst bus for this peripheral - handled by PrimeCell
935 * DMA extension.
936 */
937 {
938 .number = U300_DMA_UART0_TX,
939 .name = "UART0 TX",
940 .priority_high = 0,
941 .param.config = COH901318_CX_CFG_CH_DISABLE |
942 COH901318_CX_CFG_LCR_DISABLE |
943 COH901318_CX_CFG_TC_IRQ_ENABLE |
944 COH901318_CX_CFG_BE_IRQ_ENABLE,
945 .param.ctrl_lli_chained = 0 |
946 COH901318_CX_CTRL_TC_ENABLE |
947 COH901318_CX_CTRL_MASTER_MODE_M1RW |
948 COH901318_CX_CTRL_TCP_ENABLE |
949 COH901318_CX_CTRL_TC_IRQ_DISABLE |
950 COH901318_CX_CTRL_HSP_ENABLE |
951 COH901318_CX_CTRL_HSS_DISABLE |
952 COH901318_CX_CTRL_DDMA_LEGACY,
953 .param.ctrl_lli = 0 |
954 COH901318_CX_CTRL_TC_ENABLE |
955 COH901318_CX_CTRL_MASTER_MODE_M1RW |
956 COH901318_CX_CTRL_TCP_ENABLE |
957 COH901318_CX_CTRL_TC_IRQ_ENABLE |
958 COH901318_CX_CTRL_HSP_ENABLE |
959 COH901318_CX_CTRL_HSS_DISABLE |
960 COH901318_CX_CTRL_DDMA_LEGACY,
961 .param.ctrl_lli_last = 0 |
962 COH901318_CX_CTRL_TC_ENABLE |
963 COH901318_CX_CTRL_MASTER_MODE_M1RW |
964 COH901318_CX_CTRL_TCP_ENABLE |
965 COH901318_CX_CTRL_TC_IRQ_ENABLE |
966 COH901318_CX_CTRL_HSP_ENABLE |
967 COH901318_CX_CTRL_HSS_DISABLE |
968 COH901318_CX_CTRL_DDMA_LEGACY,
969 },
970 {
971 .number = U300_DMA_UART0_RX,
972 .name = "UART0 RX",
973 .priority_high = 0,
974 .param.config = COH901318_CX_CFG_CH_DISABLE |
975 COH901318_CX_CFG_LCR_DISABLE |
976 COH901318_CX_CFG_TC_IRQ_ENABLE |
977 COH901318_CX_CFG_BE_IRQ_ENABLE,
978 .param.ctrl_lli_chained = 0 |
979 COH901318_CX_CTRL_TC_ENABLE |
980 COH901318_CX_CTRL_MASTER_MODE_M1RW |
981 COH901318_CX_CTRL_TCP_ENABLE |
982 COH901318_CX_CTRL_TC_IRQ_DISABLE |
983 COH901318_CX_CTRL_HSP_ENABLE |
984 COH901318_CX_CTRL_HSS_DISABLE |
985 COH901318_CX_CTRL_DDMA_LEGACY,
986 .param.ctrl_lli = 0 |
987 COH901318_CX_CTRL_TC_ENABLE |
988 COH901318_CX_CTRL_MASTER_MODE_M1RW |
989 COH901318_CX_CTRL_TCP_ENABLE |
990 COH901318_CX_CTRL_TC_IRQ_ENABLE |
991 COH901318_CX_CTRL_HSP_ENABLE |
992 COH901318_CX_CTRL_HSS_DISABLE |
993 COH901318_CX_CTRL_DDMA_LEGACY,
994 .param.ctrl_lli_last = 0 |
995 COH901318_CX_CTRL_TC_ENABLE |
996 COH901318_CX_CTRL_MASTER_MODE_M1RW |
997 COH901318_CX_CTRL_TCP_ENABLE |
998 COH901318_CX_CTRL_TC_IRQ_ENABLE |
999 COH901318_CX_CTRL_HSP_ENABLE |
1000 COH901318_CX_CTRL_HSS_DISABLE |
1001 COH901318_CX_CTRL_DDMA_LEGACY,
1002 },
1003 {
1004 .number = U300_DMA_APEX_TX,
1005 .name = "APEX TX",
1006 .priority_high = 0,
1007 },
1008 {
1009 .number = U300_DMA_APEX_RX,
1010 .name = "APEX RX",
1011 .priority_high = 0,
1012 },
1013 {
1014 .number = U300_DMA_PCM_I2S0_TX,
1015 .name = "PCM I2S0 TX",
1016 .priority_high = 1,
1017 .dev_addr = U300_PCM_I2S0_BASE + 0x14,
1018 .param.config = COH901318_CX_CFG_CH_DISABLE |
1019 COH901318_CX_CFG_LCR_DISABLE |
1020 COH901318_CX_CFG_TC_IRQ_ENABLE |
1021 COH901318_CX_CFG_BE_IRQ_ENABLE,
1022 .param.ctrl_lli_chained = 0 |
1023 COH901318_CX_CTRL_TC_ENABLE |
1024 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
1025 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
1026 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
1027 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
1028 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
1029 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1030 COH901318_CX_CTRL_TCP_DISABLE |
1031 COH901318_CX_CTRL_TC_IRQ_DISABLE |
1032 COH901318_CX_CTRL_HSP_ENABLE |
1033 COH901318_CX_CTRL_HSS_DISABLE |
1034 COH901318_CX_CTRL_DDMA_LEGACY |
1035 COH901318_CX_CTRL_PRDD_SOURCE,
1036 .param.ctrl_lli = 0 |
1037 COH901318_CX_CTRL_TC_ENABLE |
1038 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
1039 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
1040 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
1041 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
1042 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
1043 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1044 COH901318_CX_CTRL_TCP_ENABLE |
1045 COH901318_CX_CTRL_TC_IRQ_DISABLE |
1046 COH901318_CX_CTRL_HSP_ENABLE |
1047 COH901318_CX_CTRL_HSS_DISABLE |
1048 COH901318_CX_CTRL_DDMA_LEGACY |
1049 COH901318_CX_CTRL_PRDD_SOURCE,
1050 .param.ctrl_lli_last = 0 |
1051 COH901318_CX_CTRL_TC_ENABLE |
1052 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
1053 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
1054 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
1055 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
1056 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
1057 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1058 COH901318_CX_CTRL_TCP_ENABLE |
1059 COH901318_CX_CTRL_TC_IRQ_DISABLE |
1060 COH901318_CX_CTRL_HSP_ENABLE |
1061 COH901318_CX_CTRL_HSS_DISABLE |
1062 COH901318_CX_CTRL_DDMA_LEGACY |
1063 COH901318_CX_CTRL_PRDD_SOURCE,
1064 },
1065 {
1066 .number = U300_DMA_PCM_I2S0_RX,
1067 .name = "PCM I2S0 RX",
1068 .priority_high = 1,
1069 .dev_addr = U300_PCM_I2S0_BASE + 0x10,
1070 .param.config = COH901318_CX_CFG_CH_DISABLE |
1071 COH901318_CX_CFG_LCR_DISABLE |
1072 COH901318_CX_CFG_TC_IRQ_ENABLE |
1073 COH901318_CX_CFG_BE_IRQ_ENABLE,
1074 .param.ctrl_lli_chained = 0 |
1075 COH901318_CX_CTRL_TC_ENABLE |
1076 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
1077 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
1078 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
1079 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
1080 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
1081 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1082 COH901318_CX_CTRL_TCP_DISABLE |
1083 COH901318_CX_CTRL_TC_IRQ_DISABLE |
1084 COH901318_CX_CTRL_HSP_ENABLE |
1085 COH901318_CX_CTRL_HSS_DISABLE |
1086 COH901318_CX_CTRL_DDMA_LEGACY |
1087 COH901318_CX_CTRL_PRDD_DEST,
1088 .param.ctrl_lli = 0 |
1089 COH901318_CX_CTRL_TC_ENABLE |
1090 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
1091 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
1092 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
1093 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
1094 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
1095 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1096 COH901318_CX_CTRL_TCP_ENABLE |
1097 COH901318_CX_CTRL_TC_IRQ_DISABLE |
1098 COH901318_CX_CTRL_HSP_ENABLE |
1099 COH901318_CX_CTRL_HSS_DISABLE |
1100 COH901318_CX_CTRL_DDMA_LEGACY |
1101 COH901318_CX_CTRL_PRDD_DEST,
1102 .param.ctrl_lli_last = 0 |
1103 COH901318_CX_CTRL_TC_ENABLE |
1104 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
1105 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
1106 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
1107 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
1108 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
1109 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1110 COH901318_CX_CTRL_TCP_ENABLE |
1111 COH901318_CX_CTRL_TC_IRQ_ENABLE |
1112 COH901318_CX_CTRL_HSP_ENABLE |
1113 COH901318_CX_CTRL_HSS_DISABLE |
1114 COH901318_CX_CTRL_DDMA_LEGACY |
1115 COH901318_CX_CTRL_PRDD_DEST,
1116 },
1117 {
1118 .number = U300_DMA_PCM_I2S1_TX,
1119 .name = "PCM I2S1 TX",
1120 .priority_high = 1,
1121 .dev_addr = U300_PCM_I2S1_BASE + 0x14,
1122 .param.config = COH901318_CX_CFG_CH_DISABLE |
1123 COH901318_CX_CFG_LCR_DISABLE |
1124 COH901318_CX_CFG_TC_IRQ_ENABLE |
1125 COH901318_CX_CFG_BE_IRQ_ENABLE,
1126 .param.ctrl_lli_chained = 0 |
1127 COH901318_CX_CTRL_TC_ENABLE |
1128 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
1129 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
1130 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
1131 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
1132 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
1133 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1134 COH901318_CX_CTRL_TCP_DISABLE |
1135 COH901318_CX_CTRL_TC_IRQ_DISABLE |
1136 COH901318_CX_CTRL_HSP_ENABLE |
1137 COH901318_CX_CTRL_HSS_DISABLE |
1138 COH901318_CX_CTRL_DDMA_LEGACY |
1139 COH901318_CX_CTRL_PRDD_SOURCE,
1140 .param.ctrl_lli = 0 |
1141 COH901318_CX_CTRL_TC_ENABLE |
1142 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
1143 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
1144 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
1145 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
1146 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
1147 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1148 COH901318_CX_CTRL_TCP_ENABLE |
1149 COH901318_CX_CTRL_TC_IRQ_DISABLE |
1150 COH901318_CX_CTRL_HSP_ENABLE |
1151 COH901318_CX_CTRL_HSS_DISABLE |
1152 COH901318_CX_CTRL_DDMA_LEGACY |
1153 COH901318_CX_CTRL_PRDD_SOURCE,
1154 .param.ctrl_lli_last = 0 |
1155 COH901318_CX_CTRL_TC_ENABLE |
1156 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
1157 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
1158 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
1159 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
1160 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
1161 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1162 COH901318_CX_CTRL_TCP_ENABLE |
1163 COH901318_CX_CTRL_TC_IRQ_ENABLE |
1164 COH901318_CX_CTRL_HSP_ENABLE |
1165 COH901318_CX_CTRL_HSS_DISABLE |
1166 COH901318_CX_CTRL_DDMA_LEGACY |
1167 COH901318_CX_CTRL_PRDD_SOURCE,
1168 },
1169 {
1170 .number = U300_DMA_PCM_I2S1_RX,
1171 .name = "PCM I2S1 RX",
1172 .priority_high = 1,
1173 .dev_addr = U300_PCM_I2S1_BASE + 0x10,
1174 .param.config = COH901318_CX_CFG_CH_DISABLE |
1175 COH901318_CX_CFG_LCR_DISABLE |
1176 COH901318_CX_CFG_TC_IRQ_ENABLE |
1177 COH901318_CX_CFG_BE_IRQ_ENABLE,
1178 .param.ctrl_lli_chained = 0 |
1179 COH901318_CX_CTRL_TC_ENABLE |
1180 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
1181 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
1182 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
1183 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
1184 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
1185 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1186 COH901318_CX_CTRL_TCP_DISABLE |
1187 COH901318_CX_CTRL_TC_IRQ_DISABLE |
1188 COH901318_CX_CTRL_HSP_ENABLE |
1189 COH901318_CX_CTRL_HSS_DISABLE |
1190 COH901318_CX_CTRL_DDMA_LEGACY |
1191 COH901318_CX_CTRL_PRDD_DEST,
1192 .param.ctrl_lli = 0 |
1193 COH901318_CX_CTRL_TC_ENABLE |
1194 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
1195 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
1196 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
1197 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
1198 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
1199 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1200 COH901318_CX_CTRL_TCP_ENABLE |
1201 COH901318_CX_CTRL_TC_IRQ_DISABLE |
1202 COH901318_CX_CTRL_HSP_ENABLE |
1203 COH901318_CX_CTRL_HSS_DISABLE |
1204 COH901318_CX_CTRL_DDMA_LEGACY |
1205 COH901318_CX_CTRL_PRDD_DEST,
1206 .param.ctrl_lli_last = 0 |
1207 COH901318_CX_CTRL_TC_ENABLE |
1208 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
1209 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
1210 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
1211 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
1212 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
1213 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1214 COH901318_CX_CTRL_TCP_ENABLE |
1215 COH901318_CX_CTRL_TC_IRQ_ENABLE |
1216 COH901318_CX_CTRL_HSP_ENABLE |
1217 COH901318_CX_CTRL_HSS_DISABLE |
1218 COH901318_CX_CTRL_DDMA_LEGACY |
1219 COH901318_CX_CTRL_PRDD_DEST,
1220 },
1221 {
1222 .number = U300_DMA_XGAM_CDI,
1223 .name = "XGAM CDI",
1224 .priority_high = 0,
1225 },
1226 {
1227 .number = U300_DMA_XGAM_PDI,
1228 .name = "XGAM PDI",
1229 .priority_high = 0,
1230 },
1231 /*
1232 * Don't set up device address, burst count or size of src
1233 * or dst bus for this peripheral - handled by PrimeCell
1234 * DMA extension.
1235 */
1236 {
1237 .number = U300_DMA_SPI_TX,
1238 .name = "SPI TX",
1239 .priority_high = 0,
1240 .param.config = COH901318_CX_CFG_CH_DISABLE |
1241 COH901318_CX_CFG_LCR_DISABLE |
1242 COH901318_CX_CFG_TC_IRQ_ENABLE |
1243 COH901318_CX_CFG_BE_IRQ_ENABLE,
1244 .param.ctrl_lli_chained = 0 |
1245 COH901318_CX_CTRL_TC_ENABLE |
1246 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1247 COH901318_CX_CTRL_TCP_DISABLE |
1248 COH901318_CX_CTRL_TC_IRQ_DISABLE |
1249 COH901318_CX_CTRL_HSP_ENABLE |
1250 COH901318_CX_CTRL_HSS_DISABLE |
1251 COH901318_CX_CTRL_DDMA_LEGACY,
1252 .param.ctrl_lli = 0 |
1253 COH901318_CX_CTRL_TC_ENABLE |
1254 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1255 COH901318_CX_CTRL_TCP_DISABLE |
1256 COH901318_CX_CTRL_TC_IRQ_ENABLE |
1257 COH901318_CX_CTRL_HSP_ENABLE |
1258 COH901318_CX_CTRL_HSS_DISABLE |
1259 COH901318_CX_CTRL_DDMA_LEGACY,
1260 .param.ctrl_lli_last = 0 |
1261 COH901318_CX_CTRL_TC_ENABLE |
1262 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1263 COH901318_CX_CTRL_TCP_DISABLE |
1264 COH901318_CX_CTRL_TC_IRQ_ENABLE |
1265 COH901318_CX_CTRL_HSP_ENABLE |
1266 COH901318_CX_CTRL_HSS_DISABLE |
1267 COH901318_CX_CTRL_DDMA_LEGACY,
1268 },
1269 {
1270 .number = U300_DMA_SPI_RX,
1271 .name = "SPI RX",
1272 .priority_high = 0,
1273 .param.config = COH901318_CX_CFG_CH_DISABLE |
1274 COH901318_CX_CFG_LCR_DISABLE |
1275 COH901318_CX_CFG_TC_IRQ_ENABLE |
1276 COH901318_CX_CFG_BE_IRQ_ENABLE,
1277 .param.ctrl_lli_chained = 0 |
1278 COH901318_CX_CTRL_TC_ENABLE |
1279 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1280 COH901318_CX_CTRL_TCP_DISABLE |
1281 COH901318_CX_CTRL_TC_IRQ_DISABLE |
1282 COH901318_CX_CTRL_HSP_ENABLE |
1283 COH901318_CX_CTRL_HSS_DISABLE |
1284 COH901318_CX_CTRL_DDMA_LEGACY,
1285 .param.ctrl_lli = 0 |
1286 COH901318_CX_CTRL_TC_ENABLE |
1287 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1288 COH901318_CX_CTRL_TCP_DISABLE |
1289 COH901318_CX_CTRL_TC_IRQ_ENABLE |
1290 COH901318_CX_CTRL_HSP_ENABLE |
1291 COH901318_CX_CTRL_HSS_DISABLE |
1292 COH901318_CX_CTRL_DDMA_LEGACY,
1293 .param.ctrl_lli_last = 0 |
1294 COH901318_CX_CTRL_TC_ENABLE |
1295 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1296 COH901318_CX_CTRL_TCP_DISABLE |
1297 COH901318_CX_CTRL_TC_IRQ_ENABLE |
1298 COH901318_CX_CTRL_HSP_ENABLE |
1299 COH901318_CX_CTRL_HSS_DISABLE |
1300 COH901318_CX_CTRL_DDMA_LEGACY,
1301
1302 },
1303 {
1304 .number = U300_DMA_GENERAL_PURPOSE_0,
1305 .name = "GENERAL 00",
1306 .priority_high = 0,
1307
1308 .param.config = flags_memcpy_config,
1309 .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1310 .param.ctrl_lli = flags_memcpy_lli,
1311 .param.ctrl_lli_last = flags_memcpy_lli_last,
1312 },
1313 {
1314 .number = U300_DMA_GENERAL_PURPOSE_1,
1315 .name = "GENERAL 01",
1316 .priority_high = 0,
1317
1318 .param.config = flags_memcpy_config,
1319 .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1320 .param.ctrl_lli = flags_memcpy_lli,
1321 .param.ctrl_lli_last = flags_memcpy_lli_last,
1322 },
1323 {
1324 .number = U300_DMA_GENERAL_PURPOSE_2,
1325 .name = "GENERAL 02",
1326 .priority_high = 0,
1327
1328 .param.config = flags_memcpy_config,
1329 .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1330 .param.ctrl_lli = flags_memcpy_lli,
1331 .param.ctrl_lli_last = flags_memcpy_lli_last,
1332 },
1333 {
1334 .number = U300_DMA_GENERAL_PURPOSE_3,
1335 .name = "GENERAL 03",
1336 .priority_high = 0,
1337
1338 .param.config = flags_memcpy_config,
1339 .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1340 .param.ctrl_lli = flags_memcpy_lli,
1341 .param.ctrl_lli_last = flags_memcpy_lli_last,
1342 },
1343 {
1344 .number = U300_DMA_GENERAL_PURPOSE_4,
1345 .name = "GENERAL 04",
1346 .priority_high = 0,
1347
1348 .param.config = flags_memcpy_config,
1349 .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1350 .param.ctrl_lli = flags_memcpy_lli,
1351 .param.ctrl_lli_last = flags_memcpy_lli_last,
1352 },
1353 {
1354 .number = U300_DMA_GENERAL_PURPOSE_5,
1355 .name = "GENERAL 05",
1356 .priority_high = 0,
1357
1358 .param.config = flags_memcpy_config,
1359 .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1360 .param.ctrl_lli = flags_memcpy_lli,
1361 .param.ctrl_lli_last = flags_memcpy_lli_last,
1362 },
1363 {
1364 .number = U300_DMA_GENERAL_PURPOSE_6,
1365 .name = "GENERAL 06",
1366 .priority_high = 0,
1367
1368 .param.config = flags_memcpy_config,
1369 .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1370 .param.ctrl_lli = flags_memcpy_lli,
1371 .param.ctrl_lli_last = flags_memcpy_lli_last,
1372 },
1373 {
1374 .number = U300_DMA_GENERAL_PURPOSE_7,
1375 .name = "GENERAL 07",
1376 .priority_high = 0,
1377
1378 .param.config = flags_memcpy_config,
1379 .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1380 .param.ctrl_lli = flags_memcpy_lli,
1381 .param.ctrl_lli_last = flags_memcpy_lli_last,
1382 },
1383 {
1384 .number = U300_DMA_GENERAL_PURPOSE_8,
1385 .name = "GENERAL 08",
1386 .priority_high = 0,
1387
1388 .param.config = flags_memcpy_config,
1389 .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1390 .param.ctrl_lli = flags_memcpy_lli,
1391 .param.ctrl_lli_last = flags_memcpy_lli_last,
1392 },
1393 {
1394 .number = U300_DMA_UART1_TX,
1395 .name = "UART1 TX",
1396 .priority_high = 0,
1397 },
1398 {
1399 .number = U300_DMA_UART1_RX,
1400 .name = "UART1 RX",
1401 .priority_high = 0,
1402 }
1403 };
1404
1405
1406 static struct coh901318_platform coh901318_platform = {
1407 .chans_slave = dma_slave_channels,
1408 .chans_memcpy = dma_memcpy_channels,
1409 .access_memory_state = coh901318_access_memory_state,
1410 .chan_conf = chan_config,
1411 .max_channels = U300_DMA_CHANNELS,
1412 };
1413
1414 static struct resource pinctrl_resources[] = {
1415 {
1416 .start = U300_SYSCON_BASE,
1417 .end = U300_SYSCON_BASE + SZ_4K - 1,
1418 .flags = IORESOURCE_MEM,
1419 },
1420 };
1421
1422 static struct platform_device wdog_device = {
1423 .name = "coh901327_wdog",
1424 .id = -1,
1425 .num_resources = ARRAY_SIZE(wdog_resources),
1426 .resource = wdog_resources,
1427 };
1428
1429 static struct platform_device i2c0_device = {
1430 .name = "stu300",
1431 .id = 0,
1432 .num_resources = ARRAY_SIZE(i2c0_resources),
1433 .resource = i2c0_resources,
1434 };
1435
1436 static struct platform_device i2c1_device = {
1437 .name = "stu300",
1438 .id = 1,
1439 .num_resources = ARRAY_SIZE(i2c1_resources),
1440 .resource = i2c1_resources,
1441 };
1442
1443 static struct platform_device pinctrl_device = {
1444 .name = "pinctrl-u300",
1445 .id = -1,
1446 .num_resources = ARRAY_SIZE(pinctrl_resources),
1447 .resource = pinctrl_resources,
1448 };
1449
1450 /*
1451 * The different variants have a few different versions of the
1452 * GPIO block, with different number of ports.
1453 */
1454 static struct u300_gpio_platform u300_gpio_plat = {
1455 .ports = 7,
1456 .gpio_base = 0,
1457 };
1458
1459 static struct platform_device gpio_device = {
1460 .name = "u300-gpio",
1461 .id = -1,
1462 .num_resources = ARRAY_SIZE(gpio_resources),
1463 .resource = gpio_resources,
1464 .dev = {
1465 .platform_data = &u300_gpio_plat,
1466 },
1467 };
1468
1469 static struct platform_device keypad_device = {
1470 .name = "keypad",
1471 .id = -1,
1472 .num_resources = ARRAY_SIZE(keypad_resources),
1473 .resource = keypad_resources,
1474 };
1475
1476 static struct platform_device rtc_device = {
1477 .name = "rtc-coh901331",
1478 .id = -1,
1479 .num_resources = ARRAY_SIZE(rtc_resources),
1480 .resource = rtc_resources,
1481 };
1482
1483 static struct mtd_partition u300_partitions[] = {
1484 {
1485 .name = "bootrecords",
1486 .offset = 0,
1487 .size = SZ_128K,
1488 },
1489 {
1490 .name = "free",
1491 .offset = SZ_128K,
1492 .size = 8064 * SZ_1K,
1493 },
1494 {
1495 .name = "platform",
1496 .offset = 8192 * SZ_1K,
1497 .size = 253952 * SZ_1K,
1498 },
1499 };
1500
1501 static struct fsmc_nand_platform_data nand_platform_data = {
1502 .partitions = u300_partitions,
1503 .nr_partitions = ARRAY_SIZE(u300_partitions),
1504 .options = NAND_SKIP_BBTSCAN,
1505 .width = FSMC_NAND_BW8,
1506 };
1507
1508 static struct platform_device nand_device = {
1509 .name = "fsmc-nand",
1510 .id = -1,
1511 .resource = fsmc_resources,
1512 .num_resources = ARRAY_SIZE(fsmc_resources),
1513 .dev = {
1514 .platform_data = &nand_platform_data,
1515 },
1516 };
1517
1518 static struct platform_device dma_device = {
1519 .name = "coh901318",
1520 .id = -1,
1521 .resource = dma_resource,
1522 .num_resources = ARRAY_SIZE(dma_resource),
1523 .dev = {
1524 .platform_data = &coh901318_platform,
1525 .coherent_dma_mask = ~0,
1526 },
1527 };
1528
1529 static unsigned long pin_pullup_conf[] = {
1530 PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 1),
1531 };
1532
1533 static unsigned long pin_highz_conf[] = {
1534 PIN_CONF_PACKED(PIN_CONFIG_BIAS_HIGH_IMPEDANCE, 0),
1535 };
1536
1537 /* Pin control settings */
1538 static struct pinctrl_map __initdata u300_pinmux_map[] = {
1539 /* anonymous maps for chip power and EMIFs */
1540 PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "power"),
1541 PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "emif0"),
1542 PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "emif1"),
1543 /* per-device maps for MMC/SD, SPI and UART */
1544 PIN_MAP_MUX_GROUP_DEFAULT("mmci", "pinctrl-u300", NULL, "mmc0"),
1545 PIN_MAP_MUX_GROUP_DEFAULT("pl022", "pinctrl-u300", NULL, "spi0"),
1546 PIN_MAP_MUX_GROUP_DEFAULT("uart0", "pinctrl-u300", NULL, "uart0"),
1547 /* This pin is used for clock return rather than GPIO */
1548 PIN_MAP_CONFIGS_PIN_DEFAULT("mmci", "pinctrl-u300", "PIO APP GPIO 11",
1549 pin_pullup_conf),
1550 /* This pin is used for card detect */
1551 PIN_MAP_CONFIGS_PIN_DEFAULT("mmci", "pinctrl-u300", "PIO MS INS",
1552 pin_highz_conf),
1553 };
1554
1555 /*
1556 * Notice that AMBA devices are initialized before platform devices.
1557 *
1558 */
1559 static struct platform_device *platform_devs[] __initdata = {
1560 &dma_device,
1561 &i2c0_device,
1562 &i2c1_device,
1563 &keypad_device,
1564 &rtc_device,
1565 &pinctrl_device,
1566 &gpio_device,
1567 &nand_device,
1568 &wdog_device,
1569 };
1570
1571 /*
1572 * Interrupts: the U300 platforms have two pl190 ARM PrimeCells connected
1573 * together so some interrupts are connected to the first one and some
1574 * to the second one.
1575 */
1576 static void __init u300_init_irq(void)
1577 {
1578 u32 mask[2] = {0, 0};
1579 struct clk *clk;
1580 int i;
1581
1582 /* initialize clocking early, we want to clock the INTCON */
1583 u300_clk_init(U300_SYSCON_VBASE);
1584
1585 /* Bootstrap EMIF and SEMI clocks */
1586 clk = clk_get_sys("pl172", NULL);
1587 BUG_ON(IS_ERR(clk));
1588 clk_prepare_enable(clk);
1589 clk = clk_get_sys("semi", NULL);
1590 BUG_ON(IS_ERR(clk));
1591 clk_prepare_enable(clk);
1592
1593 /* Clock the interrupt controller */
1594 clk = clk_get_sys("intcon", NULL);
1595 BUG_ON(IS_ERR(clk));
1596 clk_prepare_enable(clk);
1597
1598 for (i = 0; i < U300_VIC_IRQS_END; i++)
1599 set_bit(i, (unsigned long *) &mask[0]);
1600 vic_init((void __iomem *) U300_INTCON0_VBASE, IRQ_U300_INTCON0_START,
1601 mask[0], mask[0]);
1602 vic_init((void __iomem *) U300_INTCON1_VBASE, IRQ_U300_INTCON1_START,
1603 mask[1], mask[1]);
1604 }
1605
1606
1607 /*
1608 * U300 platforms peripheral handling
1609 */
1610 struct db_chip {
1611 u16 chipid;
1612 const char *name;
1613 };
1614
1615 /*
1616 * This is a list of the Digital Baseband chips used in the U300 platform.
1617 */
1618 static struct db_chip db_chips[] __initdata = {
1619 {
1620 .chipid = 0xb800,
1621 .name = "DB3000",
1622 },
1623 {
1624 .chipid = 0xc000,
1625 .name = "DB3100",
1626 },
1627 {
1628 .chipid = 0xc800,
1629 .name = "DB3150",
1630 },
1631 {
1632 .chipid = 0xd800,
1633 .name = "DB3200",
1634 },
1635 {
1636 .chipid = 0xe000,
1637 .name = "DB3250",
1638 },
1639 {
1640 .chipid = 0xe800,
1641 .name = "DB3210",
1642 },
1643 {
1644 .chipid = 0xf000,
1645 .name = "DB3350 P1x",
1646 },
1647 {
1648 .chipid = 0xf100,
1649 .name = "DB3350 P2x",
1650 },
1651 {
1652 .chipid = 0x0000, /* List terminator */
1653 .name = NULL,
1654 }
1655 };
1656
1657 static void __init u300_init_check_chip(void)
1658 {
1659
1660 u16 val;
1661 struct db_chip *chip;
1662 const char *chipname;
1663 const char unknown[] = "UNKNOWN";
1664
1665 /* Read out and print chip ID */
1666 val = readw(U300_SYSCON_VBASE + U300_SYSCON_CIDR);
1667 /* This is in funky bigendian order... */
1668 val = (val & 0xFFU) << 8 | (val >> 8);
1669 chip = db_chips;
1670 chipname = unknown;
1671
1672 for ( ; chip->chipid; chip++) {
1673 if (chip->chipid == (val & 0xFF00U)) {
1674 chipname = chip->name;
1675 break;
1676 }
1677 }
1678 printk(KERN_INFO "Initializing U300 system on %s baseband chip " \
1679 "(chip ID 0x%04x)\n", chipname, val);
1680
1681 if ((val & 0xFF00U) != 0xf000 && (val & 0xFF00U) != 0xf100) {
1682 printk(KERN_ERR "Platform configured for BS335 " \
1683 " with DB3350 but %s detected, expect problems!",
1684 chipname);
1685 }
1686 }
1687
1688 /*
1689 * Some devices and their resources require reserved physical memory from
1690 * the end of the available RAM. This function traverses the list of devices
1691 * and assigns actual addresses to these.
1692 */
1693 static void __init u300_assign_physmem(void)
1694 {
1695 unsigned long curr_start = __pa(high_memory);
1696 int i, j;
1697
1698 for (i = 0; i < ARRAY_SIZE(platform_devs); i++) {
1699 for (j = 0; j < platform_devs[i]->num_resources; j++) {
1700 struct resource *const res =
1701 &platform_devs[i]->resource[j];
1702
1703 if (IORESOURCE_MEM == res->flags &&
1704 0 == res->start) {
1705 res->start = curr_start;
1706 res->end += curr_start;
1707 curr_start += resource_size(res);
1708
1709 printk(KERN_INFO "core.c: Mapping RAM " \
1710 "%#x-%#x to device %s:%s\n",
1711 res->start, res->end,
1712 platform_devs[i]->name, res->name);
1713 }
1714 }
1715 }
1716 }
1717
1718 static void __init u300_init_machine(void)
1719 {
1720 int i;
1721 u16 val;
1722
1723 /* Check what platform we run and print some status information */
1724 u300_init_check_chip();
1725
1726 /* Initialize SPI device with some board specifics */
1727 u300_spi_init(&pl022_device);
1728
1729 /* Register the AMBA devices in the AMBA bus abstraction layer */
1730 for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
1731 struct amba_device *d = amba_devs[i];
1732 amba_device_register(d, &iomem_resource);
1733 }
1734
1735 u300_assign_physmem();
1736
1737 /* Initialize pinmuxing */
1738 pinctrl_register_mappings(u300_pinmux_map,
1739 ARRAY_SIZE(u300_pinmux_map));
1740
1741 /* Register subdevices on the I2C buses */
1742 u300_i2c_register_board_devices();
1743
1744 /* Register the platform devices */
1745 platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
1746
1747 /* Register subdevices on the SPI bus */
1748 u300_spi_register_board_devices();
1749
1750 /* Enable SEMI self refresh */
1751 val = readw(U300_SYSCON_VBASE + U300_SYSCON_SMCR) |
1752 U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE;
1753 writew(val, U300_SYSCON_VBASE + U300_SYSCON_SMCR);
1754 }
1755
1756 /* Forward declare this function from the watchdog */
1757 void coh901327_watchdog_reset(void);
1758
1759 static void u300_restart(char mode, const char *cmd)
1760 {
1761 switch (mode) {
1762 case 's':
1763 case 'h':
1764 #ifdef CONFIG_COH901327_WATCHDOG
1765 coh901327_watchdog_reset();
1766 #endif
1767 break;
1768 default:
1769 /* Do nothing */
1770 break;
1771 }
1772 /* Wait for system do die/reset. */
1773 while (1);
1774 }
1775
1776 MACHINE_START(U300, "Ericsson AB U335 S335/B335 Prototype Board")
1777 /* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */
1778 .atag_offset = 0x100,
1779 .map_io = u300_map_io,
1780 .nr_irqs = 0,
1781 .init_irq = u300_init_irq,
1782 .handle_irq = vic_handle_irq,
1783 .init_time = u300_timer_init,
1784 .init_machine = u300_init_machine,
1785 .restart = u300_restart,
1786 MACHINE_END
A mirror of Linus' kernel repository