arch/arm/mach-uniphier/include/mach/sc-regs.h

   1 /*
   2  * UniPhier SC (System Control) block registers
   3  *
   4  * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef ARCH_SC_REGS_H
  10 #define ARCH_SC_REGS_H
  11
  12 #if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3)
  13 #define SC_BASE_ADDR                    0xf1840000
  14 #else
  15 #define SC_BASE_ADDR                    0x61840000
  16 #endif
  17
  18 #define SC_DPLLCTRL                     (SC_BASE_ADDR | 0x1200)
  19 #define SC_DPLLCTRL_SSC_EN              (0x1 << 31)
  20 #define SC_DPLLCTRL_FOUTMODE_MASK        (0xf << 16)
  21 #define SC_DPLLCTRL_SSC_RATE            (0x1 << 15)
  22
  23 #define SC_DPLLCTRL2                    (SC_BASE_ADDR | 0x1204)
  24 #define SC_DPLLCTRL2_NRSTDS             (0x1 << 28)
  25
  26 #define SC_DPLLCTRL3                    (SC_BASE_ADDR | 0x1208)
  27 #define SC_DPLLCTRL3_LPFSEL_COEF2       (0x0 << 31)
  28 #define SC_DPLLCTRL3_LPFSEL_COEF3       (0x1 << 31)
  29
  30 #define SC_UPLLCTRL                     (SC_BASE_ADDR | 0x1210)
  31
  32 #define SC_VPLL27ACTRL                  (SC_BASE_ADDR | 0x1270)
  33 #define SC_VPLL27ACTRL2                 (SC_BASE_ADDR | 0x1274)
  34 #define SC_VPLL27ACTRL3                 (SC_BASE_ADDR | 0x1278)
  35
  36 #define SC_VPLL27BCTRL                  (SC_BASE_ADDR | 0x1290)
  37 #define SC_VPLL27BCTRL2                 (SC_BASE_ADDR | 0x1294)
  38 #define SC_VPLL27BCTRL3                 (SC_BASE_ADDR | 0x1298)
  39
  40 #define SC_RSTCTRL                      (SC_BASE_ADDR | 0x2000)
  41 #define SC_RSTCTRL_NRST_USB3B0          (0x1 << 17)     /* USB3 #0 bus */
  42 #define SC_RSTCTRL_NRST_USB3C0          (0x1 << 16)     /* USB3 #0 core */
  43 #define SC_RSTCTRL_NRST_ETHER           (0x1 << 12)
  44 #define SC_RSTCTRL_NRST_STDMAC          (0x1 << 10)
  45 #define SC_RSTCTRL_NRST_GIO             (0x1 <<  6)
  46 #define SC_RSTCTRL_NRST_UMC1            (0x1 <<  5)
  47 #define SC_RSTCTRL_NRST_UMC0            (0x1 <<  4)
  48 #define SC_RSTCTRL_NRST_NAND            (0x1 <<  2)
  49
  50 #define SC_RSTCTRL2                     (SC_BASE_ADDR | 0x2004)
  51 #define SC_RSTCTRL2_NRST_USB3B1         (0x1 << 17)     /* USB3 #1 bus */
  52 #define SC_RSTCTRL2_NRST_USB3C1         (0x1 << 16)     /* USB3 #1 core */
  53
  54 #define SC_RSTCTRL3                     (SC_BASE_ADDR | 0x2008)
  55
  56 #define SC_CLKCTRL                      (SC_BASE_ADDR | 0x2104)
  57 #define SC_CLKCTRL_CEN_USB31            (0x1 << 17)     /* USB3 #1 */
  58 #define SC_CLKCTRL_CEN_USB30            (0x1 << 16)     /* USB3 #0 */
  59 #define SC_CLKCTRL_CEN_ETHER            (0x1 << 12)
  60 #define SC_CLKCTRL_CEN_MIO              (0x1 << 11)
  61 #define SC_CLKCTRL_CEN_STDMAC           (0x1 << 10)
  62 #define SC_CLKCTRL_CEN_GIO              (0x1 <<  6)
  63 #define SC_CLKCTRL_CEN_UMC              (0x1 <<  4)
  64 #define SC_CLKCTRL_CEN_NAND             (0x1 <<  2)
  65 #define SC_CLKCTRL_CEN_SBC              (0x1 <<  1)
  66 #define SC_CLKCTRL_CEN_PERI             (0x1 <<  0)
  67
  68 /* System reset control register */
  69 #define SC_IRQTIMSET                    (SC_BASE_ADDR | 0x3000)
  70 #define SC_SLFRSTSEL                    (SC_BASE_ADDR | 0x3010)
  71 #define SC_SLFRSTCTL                    (SC_BASE_ADDR | 0x3014)
  72
  73 #endif /* ARCH_SC_REGS_H */