]> git.ipfire.org Git - thirdparty/kernel/linux.git/blob - arch/arm64/Kconfig.platforms
arm64: imx: Fix build error without CONFIG_SOC_BUS
[thirdparty/kernel/linux.git] / arch / arm64 / Kconfig.platforms
1 menu "Platform selection"
2
3 config ARCH_ACTIONS
4 bool "Actions Semi Platforms"
5 select OWL_TIMER
6 select PINCTRL
7 help
8 This enables support for the Actions Semiconductor S900 SoC family.
9
10 config ARCH_AGILEX
11 bool "Intel's Agilex SoCFPGA Family"
12 help
13 This enables support for Intel's Agilex SoCFPGA Family.
14
15 config ARCH_SUNXI
16 bool "Allwinner sunxi 64-bit SoC Family"
17 select ARCH_HAS_RESET_CONTROLLER
18 select GENERIC_IRQ_CHIP
19 select PINCTRL
20 select RESET_CONTROLLER
21 help
22 This enables support for Allwinner sunxi based SoCs like the A64.
23
24 config ARCH_ALPINE
25 bool "Annapurna Labs Alpine platform"
26 select ALPINE_MSI if PCI
27 help
28 This enables support for the Annapurna Labs Alpine
29 Soc family.
30
31 config ARCH_BCM2835
32 bool "Broadcom BCM2835 family"
33 select TIMER_OF
34 select GPIOLIB
35 select MFD_CORE
36 select PINCTRL
37 select PINCTRL_BCM2835
38 select ARM_AMBA
39 select ARM_TIMER_SP804
40 select HAVE_ARM_ARCH_TIMER
41 help
42 This enables support for the Broadcom BCM2837 SoC.
43 This SoC is used in the Raspberry Pi 3 device.
44
45 config ARCH_BCM_IPROC
46 bool "Broadcom iProc SoC Family"
47 select COMMON_CLK_IPROC
48 select GPIOLIB
49 select PINCTRL
50 help
51 This enables support for Broadcom iProc based SoCs
52
53 config ARCH_BERLIN
54 bool "Marvell Berlin SoC Family"
55 select DW_APB_ICTL
56 select GPIOLIB
57 select PINCTRL
58 help
59 This enables support for Marvell Berlin SoC Family
60
61 config ARCH_BITMAIN
62 bool "Bitmain SoC Platforms"
63 help
64 This enables support for the Bitmain SoC Family.
65
66 config ARCH_BRCMSTB
67 bool "Broadcom Set-Top-Box SoCs"
68 select BRCMSTB_L2_IRQ
69 select GENERIC_IRQ_CHIP
70 help
71 This enables support for Broadcom's ARMv8 Set Top Box SoCs
72
73 config ARCH_EXYNOS
74 bool "ARMv8 based Samsung Exynos SoC family"
75 select COMMON_CLK_SAMSUNG
76 select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS
77 select EXYNOS_PMU
78 select HAVE_S3C2410_WATCHDOG if WATCHDOG
79 select HAVE_S3C_RTC if RTC_CLASS
80 select PINCTRL
81 select PINCTRL_EXYNOS
82 select PM_GENERIC_DOMAINS if PM
83 select SOC_SAMSUNG
84 help
85 This enables support for ARMv8 based Samsung Exynos SoC family.
86
87 config ARCH_K3
88 bool "Texas Instruments Inc. K3 multicore SoC architecture"
89 select PM_GENERIC_DOMAINS if PM
90 select MAILBOX
91 select TI_MESSAGE_MANAGER
92 select TI_SCI_PROTOCOL
93 select TI_SCI_INTR_IRQCHIP
94 select TI_SCI_INTA_IRQCHIP
95 help
96 This enables support for Texas Instruments' K3 multicore SoC
97 architecture.
98
99 config ARCH_LAYERSCAPE
100 bool "ARMv8 based Freescale Layerscape SoC family"
101 select EDAC_SUPPORT
102 help
103 This enables support for the Freescale Layerscape SoC family.
104
105 config ARCH_LG1K
106 bool "LG Electronics LG1K SoC Family"
107 help
108 This enables support for LG Electronics LG1K SoC Family
109
110 config ARCH_HISI
111 bool "Hisilicon SoC Family"
112 select ARM_TIMER_SP804
113 select HISILICON_IRQ_MBIGEN if PCI
114 select PINCTRL
115 help
116 This enables support for Hisilicon ARMv8 SoC family
117
118 config ARCH_MEDIATEK
119 bool "MediaTek SoC Family"
120 select ARM_GIC
121 select PINCTRL
122 select MTK_TIMER
123 help
124 This enables support for MediaTek MT27xx, MT65xx, MT76xx
125 & MT81xx ARMv8 SoCs
126
127 config ARCH_MESON
128 bool "Amlogic Platforms"
129 select PINCTRL
130 select PINCTRL_MESON
131 select COMMON_CLK_GXBB
132 select COMMON_CLK_AXG
133 select COMMON_CLK_G12A
134 select MESON_IRQ_GPIO
135 help
136 This enables support for the arm64 based Amlogic SoCs
137 such as the s905, S905X/D, S912, A113X/D or S905X/D2
138
139 config ARCH_MVEBU
140 bool "Marvell EBU SoC Family"
141 select ARMADA_AP806_SYSCON
142 select ARMADA_CP110_SYSCON
143 select ARMADA_37XX_CLK
144 select GPIOLIB
145 select GPIOLIB_IRQCHIP
146 select MVEBU_GICP
147 select MVEBU_ICU
148 select MVEBU_ODMI
149 select MVEBU_PIC
150 select MVEBU_SEI
151 select OF_GPIO
152 select PINCTRL
153 select PINCTRL_ARMADA_37XX
154 select PINCTRL_ARMADA_AP806
155 select PINCTRL_ARMADA_CP110
156 help
157 This enables support for Marvell EBU familly, including:
158 - Armada 3700 SoC Family
159 - Armada 7K SoC Family
160 - Armada 8K SoC Family
161
162 config ARCH_MXC
163 bool "ARMv8 based NXP i.MX SoC family"
164 select ARM64_ERRATUM_843419
165 select ARM64_ERRATUM_845719 if COMPAT
166 select IMX_GPCV2
167 select IMX_GPCV2_PM_DOMAINS
168 select PM
169 select PM_GENERIC_DOMAINS
170 select SOC_BUS
171 help
172 This enables support for the ARMv8 based SoCs in the
173 NXP i.MX family.
174
175 config ARCH_QCOM
176 bool "Qualcomm Platforms"
177 select GPIOLIB
178 select PINCTRL
179 help
180 This enables support for the ARMv8 based Qualcomm chipsets.
181
182 config ARCH_REALTEK
183 bool "Realtek Platforms"
184 help
185 This enables support for the ARMv8 based Realtek chipsets,
186 like the RTD1295.
187
188 config ARCH_RENESAS
189 bool "Renesas SoC Platforms"
190 select GPIOLIB
191 select PINCTRL
192 select SOC_BUS
193 help
194 This enables support for the ARMv8 based Renesas SoCs.
195
196 config ARCH_ROCKCHIP
197 bool "Rockchip Platforms"
198 select ARCH_HAS_RESET_CONTROLLER
199 select GPIOLIB
200 select PINCTRL
201 select PINCTRL_ROCKCHIP
202 select PM
203 select ROCKCHIP_TIMER
204 help
205 This enables support for the ARMv8 based Rockchip chipsets,
206 like the RK3368.
207
208 config ARCH_SEATTLE
209 bool "AMD Seattle SoC Family"
210 help
211 This enables support for AMD Seattle SOC Family
212
213 config ARCH_STRATIX10
214 bool "Altera's Stratix 10 SoCFPGA Family"
215 help
216 This enables support for Altera's Stratix 10 SoCFPGA Family.
217
218 config ARCH_SYNQUACER
219 bool "Socionext SynQuacer SoC Family"
220
221 config ARCH_TEGRA
222 bool "NVIDIA Tegra SoC Family"
223 select ARCH_HAS_RESET_CONTROLLER
224 select ARM_GIC_PM
225 select CLKDEV_LOOKUP
226 select CLKSRC_MMIO
227 select TIMER_OF
228 select GENERIC_CLOCKEVENTS
229 select GPIOLIB
230 select PINCTRL
231 select PM
232 select PM_GENERIC_DOMAINS
233 select RESET_CONTROLLER
234 help
235 This enables support for the NVIDIA Tegra SoC family.
236
237 config ARCH_SPRD
238 bool "Spreadtrum SoC platform"
239 help
240 Support for Spreadtrum ARM based SoCs
241
242 config ARCH_THUNDER
243 bool "Cavium Inc. Thunder SoC Family"
244 help
245 This enables support for Cavium's Thunder Family of SoCs.
246
247 config ARCH_THUNDER2
248 bool "Cavium ThunderX2 Server Processors"
249 select GPIOLIB
250 help
251 This enables support for Cavium's ThunderX2 CN99XX family of
252 server processors.
253
254 config ARCH_UNIPHIER
255 bool "Socionext UniPhier SoC Family"
256 select ARCH_HAS_RESET_CONTROLLER
257 select PINCTRL
258 select RESET_CONTROLLER
259 help
260 This enables support for Socionext UniPhier SoC family.
261
262 config ARCH_VEXPRESS
263 bool "ARMv8 software model (Versatile Express)"
264 select COMMON_CLK_VERSATILE
265 select GPIOLIB
266 select PM
267 select PM_GENERIC_DOMAINS
268 select POWER_RESET_VEXPRESS
269 select VEXPRESS_CONFIG
270 help
271 This enables support for the ARMv8 software model (Versatile
272 Express).
273
274 config ARCH_VULCAN
275 def_bool n
276
277 config ARCH_XGENE
278 bool "AppliedMicro X-Gene SOC Family"
279 help
280 This enables support for AppliedMicro X-Gene SOC Family
281
282 config ARCH_ZX
283 bool "ZTE ZX SoC Family"
284 select PINCTRL
285 help
286 This enables support for ZTE ZX SoC Family
287
288 config ARCH_ZYNQMP
289 bool "Xilinx ZynqMP Family"
290 select ZYNQMP_FIRMWARE
291 help
292 This enables support for Xilinx ZynqMP Family
293
294 endmenu