arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Lenovo Yoga C630
   4  *
   5  * Copyright (c) 2019, Linaro Ltd.
   6  */
   7
   8 /dts-v1/;
   9
  10 #include <dt-bindings/gpio/gpio.h>
  11 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
  12 #include <dt-bindings/sound/qcom,q6afe.h>
  13 #include <dt-bindings/sound/qcom,q6asm.h>
  14 #include "sdm845.dtsi"
  15 #include "pm8998.dtsi"
  16
  17 / {
  18         model = "Lenovo Yoga C630";
  19         compatible = "lenovo,yoga-c630", "qcom,sdm845";
  20
  21         aliases {
  22                 hsuart0 = &uart6;
  23         };
  24 };
  25
  26 &adsp_pas {
  27         firmware-name = "qcom/LENOVO/81JL/qcadsp850.mbn";
  28         status = "okay";
  29 };
  30
  31 &apps_rsc {
  32         pm8998-rpmh-regulators {
  33                 compatible = "qcom,pm8998-rpmh-regulators";
  34                 qcom,pmic-id = "a";
  35
  36                 vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
  37                 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
  38
  39                 vreg_s2a_1p125: smps2 {
  40                 };
  41
  42                 vreg_s3a_1p35: smps3 {
  43                         regulator-min-microvolt = <1352000>;
  44                         regulator-max-microvolt = <1352000>;
  45                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  46                 };
  47
  48                 vreg_s4a_1p8: smps4 {
  49                         regulator-min-microvolt = <1800000>;
  50                         regulator-max-microvolt = <1800000>;
  51                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  52                 };
  53
  54                 vreg_s5a_2p04: smps5 {
  55                         regulator-min-microvolt = <2040000>;
  56                         regulator-max-microvolt = <2040000>;
  57                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  58                 };
  59
  60                 vreg_s7a_1p025: smps7 {
  61                 };
  62
  63                 vdd_qusb_hs0:
  64                 vdda_hp_pcie_core:
  65                 vdda_mipi_csi0_0p9:
  66                 vdda_mipi_csi1_0p9:
  67                 vdda_mipi_csi2_0p9:
  68                 vdda_mipi_dsi0_pll:
  69                 vdda_mipi_dsi1_pll:
  70                 vdda_qlink_lv:
  71                 vdda_qlink_lv_ck:
  72                 vdda_qrefs_0p875:
  73                 vdda_pcie_core:
  74                 vdda_pll_cc_ebi01:
  75                 vdda_pll_cc_ebi23:
  76                 vdda_sp_sensor:
  77                 vdda_ufs1_core:
  78                 vdda_ufs2_core:
  79                 vdda_usb1_ss_core:
  80                 vdda_usb2_ss_core:
  81                 vreg_l1a_0p875: ldo1 {
  82                         regulator-min-microvolt = <880000>;
  83                         regulator-max-microvolt = <880000>;
  84                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  85                 };
  86
  87                 vddpx_10:
  88                 vreg_l2a_1p2: ldo2 {
  89                         regulator-min-microvolt = <1200000>;
  90                         regulator-max-microvolt = <1200000>;
  91                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  92                         regulator-always-on;
  93                 };
  94
  95                 vreg_l3a_1p0: ldo3 {
  96                 };
  97
  98                 vdd_wcss_cx:
  99                 vdd_wcss_mx:
 100                 vdda_wcss_pll:
 101                 vreg_l5a_0p8: ldo5 {
 102                         regulator-min-microvolt = <800000>;
 103                         regulator-max-microvolt = <800000>;
 104                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 105                 };
 106
 107                 vddpx_13:
 108                 vreg_l6a_1p8: ldo6 {
 109                         regulator-min-microvolt = <1800000>;
 110                         regulator-max-microvolt = <1800000>;
 111                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 112                 };
 113
 114                 vreg_l7a_1p8: ldo7 {
 115                         regulator-min-microvolt = <1800000>;
 116                         regulator-max-microvolt = <1800000>;
 117                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 118                 };
 119
 120                 vreg_l8a_1p2: ldo8 {
 121                 };
 122
 123                 vreg_l9a_1p8: ldo9 {
 124                 };
 125
 126                 vreg_l10a_1p8: ldo10 {
 127                 };
 128
 129                 vreg_l11a_1p0: ldo11 {
 130                 };
 131
 132                 vdd_qfprom:
 133                 vdd_qfprom_sp:
 134                 vdda_apc1_cs_1p8:
 135                 vdda_gfx_cs_1p8:
 136                 vdda_qrefs_1p8:
 137                 vdda_qusb_hs0_1p8:
 138                 vddpx_11:
 139                 vreg_l12a_1p8: ldo12 {
 140                         regulator-min-microvolt = <1800000>;
 141                         regulator-max-microvolt = <1800000>;
 142                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 143                 };
 144
 145                 vddpx_2:
 146                 vreg_l13a_2p95: ldo13 {
 147                 };
 148
 149                 vreg_l14a_1p88: ldo14 {
 150                         regulator-min-microvolt = <1880000>;
 151                         regulator-max-microvolt = <1880000>;
 152                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 153                         regulator-always-on;
 154                 };
 155
 156                 vreg_l15a_1p8: ldo15 {
 157                 };
 158
 159                 vreg_l16a_2p7: ldo16 {
 160                 };
 161
 162                 vreg_l17a_1p3: ldo17 {
 163                         regulator-min-microvolt = <1304000>;
 164                         regulator-max-microvolt = <1304000>;
 165                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 166                 };
 167
 168                 vreg_l18a_2p7: ldo18 {
 169                 };
 170
 171                 vreg_l19a_3p0: ldo19 {
 172                         regulator-min-microvolt = <3100000>;
 173                         regulator-max-microvolt = <3108000>;
 174                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 175                 };
 176
 177                 vreg_l20a_2p95: ldo20 {
 178                         regulator-min-microvolt = <2960000>;
 179                         regulator-max-microvolt = <2960000>;
 180                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 181                 };
 182
 183                 vreg_l21a_2p95: ldo21 {
 184                 };
 185
 186                 vreg_l22a_2p85: ldo22 {
 187                 };
 188
 189                 vreg_l23a_3p3: ldo23 {
 190                 };
 191
 192                 vdda_qusb_hs0_3p1:
 193                 vreg_l24a_3p075: ldo24 {
 194                         regulator-min-microvolt = <3075000>;
 195                         regulator-max-microvolt = <3083000>;
 196                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 197                 };
 198
 199                 vreg_l25a_3p3: ldo25 {
 200                         regulator-min-microvolt = <3104000>;
 201                         regulator-max-microvolt = <3112000>;
 202                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 203                 };
 204
 205                 vdda_hp_pcie_1p2:
 206                 vdda_hv_ebi0:
 207                 vdda_hv_ebi1:
 208                 vdda_hv_ebi2:
 209                 vdda_hv_ebi3:
 210                 vdda_mipi_csi_1p25:
 211                 vdda_mipi_dsi0_1p2:
 212                 vdda_mipi_dsi1_1p2:
 213                 vdda_pcie_1p2:
 214                 vdda_ufs1_1p2:
 215                 vdda_ufs2_1p2:
 216                 vdda_usb1_ss_1p2:
 217                 vdda_usb2_ss_1p2:
 218                 vreg_l26a_1p2: ldo26 {
 219                         regulator-min-microvolt = <1200000>;
 220                         regulator-max-microvolt = <1208000>;
 221                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 222                 };
 223
 224                 vreg_l28a_3p0: ldo28 {
 225                 };
 226
 227                 vreg_lvs1a_1p8: lvs1 {
 228                 };
 229
 230                 vreg_lvs2a_1p8: lvs2 {
 231                 };
 232         };
 233 };
 234
 235 &apps_smmu {
 236         /* TODO: Figure out how to survive booting with this enabled */
 237         status = "disabled";
 238 };
 239
 240 &cdsp_pas {
 241         firmware-name = "qcom/LENOVO/81JL/qccdsp850.mbn";
 242         status = "okay";
 243 };
 244
 245 &gcc {
 246         protected-clocks = <GCC_QSPI_CORE_CLK>,
 247                            <GCC_QSPI_CORE_CLK_SRC>,
 248                            <GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
 249 };
 250
 251 &gpu {
 252         zap-shader {
 253                 memory-region = <&gpu_mem>;
 254                 firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn";
 255         };
 256 };
 257
 258 &i2c1 {
 259         status = "okay";
 260         clock-frequency = <400000>;
 261 };
 262
 263 &i2c3 {
 264         status = "okay";
 265         clock-frequency = <400000>;
 266
 267         hid@15 {
 268                 compatible = "hid-over-i2c";
 269                 reg = <0x15>;
 270                 hid-descr-addr = <0x1>;
 271
 272                 interrupts-extended = <&tlmm 37 IRQ_TYPE_EDGE_RISING>;
 273         };
 274
 275         hid@2c {
 276                 compatible = "hid-over-i2c";
 277                 reg = <0x2c>;
 278                 hid-descr-addr = <0x20>;
 279
 280                 interrupts-extended = <&tlmm 37 IRQ_TYPE_EDGE_RISING>;
 281
 282                 pinctrl-names = "default";
 283                 pinctrl-0 = <&i2c2_hid_active>;
 284         };
 285 };
 286
 287 &i2c5 {
 288         status = "okay";
 289         clock-frequency = <400000>;
 290
 291         hid@10 {
 292                 compatible = "hid-over-i2c";
 293                 reg = <0x10>;
 294                 hid-descr-addr = <0x1>;
 295
 296                 interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
 297
 298                 pinctrl-names = "default";
 299                 pinctrl-0 = <&i2c6_hid_active>;
 300         };
 301 };
 302
 303 &i2c11 {
 304         status = "okay";
 305         clock-frequency = <400000>;
 306
 307         hid@5c {
 308                 compatible = "hid-over-i2c";
 309                 reg = <0x5c>;
 310                 hid-descr-addr = <0x1>;
 311
 312                 interrupts-extended = <&tlmm 92 IRQ_TYPE_LEVEL_LOW>;
 313
 314                 pinctrl-names = "default";
 315                 pinctrl-0 = <&i2c12_hid_active>;
 316         };
 317 };
 318
 319 &mss_pil {
 320         firmware-name = "qcom/LENOVO/81JL/qcdsp1v2850.mbn", "qcom/LENOVO/81JL/qcdsp2850.mbn";
 321 };
 322
 323 &qup_i2c12_default {
 324         drive-strength = <2>;
 325         bias-disable;
 326 };
 327
 328 &qup_uart6_default {
 329         pinmux {
 330                  pins = "gpio45", "gpio46", "gpio47", "gpio48";
 331                  function = "qup6";
 332         };
 333
 334         cts {
 335                 pins = "gpio45";
 336                 bias-pull-down;
 337         };
 338
 339         rts-tx {
 340                 pins = "gpio46", "gpio47";
 341                 drive-strength = <2>;
 342                 bias-disable;
 343         };
 344
 345         rx {
 346                 pins = "gpio48";
 347                 bias-pull-up;
 348         };
 349 };
 350
 351 &qupv3_id_0 {
 352         status = "okay";
 353 };
 354
 355 &qupv3_id_1 {
 356         status = "okay";
 357 };
 358
 359 &q6asmdai {
 360         dai@0 {
 361                 reg = <0>;
 362         };
 363
 364         dai@1 {
 365                 reg = <1>;
 366         };
 367 };
 368
 369 &sound {
 370         compatible = "qcom,db845c-sndcard";
 371         model = "Lenovo-YOGA-C630-13Q50";
 372
 373         audio-routing =
 374                 "RX_BIAS", "MCLK",
 375                 "AMIC2", "MIC BIAS2",
 376                 "SpkrLeft IN", "SPK1 OUT",
 377                 "SpkrRight IN", "SPK2 OUT",
 378                 "MM_DL1",  "MultiMedia1 Playback",
 379                 "MultiMedia2 Capture", "MM_UL2";
 380
 381         mm1-dai-link {
 382                 link-name = "MultiMedia1";
 383                 cpu {
 384                         sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
 385                 };
 386         };
 387
 388         mm2-dai-link {
 389                 link-name = "MultiMedia2";
 390                 cpu {
 391                         sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
 392                 };
 393         };
 394
 395         slim-dai-link {
 396                 link-name = "SLIM Playback";
 397                 cpu {
 398                         sound-dai = <&q6afedai SLIMBUS_0_RX>;
 399                 };
 400
 401                 platform {
 402                         sound-dai = <&q6routing>;
 403                 };
 404
 405                 codec {
 406                         sound-dai =  <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>;
 407                 };
 408         };
 409
 410         slimcap-dai-link {
 411                 link-name = "SLIM Capture";
 412                 cpu {
 413                         sound-dai = <&q6afedai SLIMBUS_0_TX>;
 414                 };
 415
 416                 platform {
 417                         sound-dai = <&q6routing>;
 418                 };
 419
 420                 codec {
 421                         sound-dai = <&wcd9340 1>;
 422                 };
 423         };
 424 };
 425
 426 &tlmm {
 427         gpio-reserved-ranges = <0 4>, <81 4>;
 428
 429         i2c2_hid_active: i2c2-hid-active {
 430                 pins = <37>;
 431                 function = "gpio";
 432
 433                 input-enable;
 434                 bias-pull-up;
 435                 drive-strength = <2>;
 436         };
 437
 438         i2c6_hid_active: i2c6-hid-active {
 439                 pins = <125>;
 440                 function = "gpio";
 441
 442                 input-enable;
 443                 bias-pull-up;
 444                 drive-strength = <2>;
 445         };
 446
 447         i2c12_hid_active: i2c12-hid-active {
 448                 pins = <92>;
 449                 function = "gpio";
 450
 451                 input-enable;
 452                 bias-pull-up;
 453                 drive-strength = <2>;
 454         };
 455
 456         wcd_intr_default: wcd_intr_default {
 457                 pins = <54>;
 458                 function = "gpio";
 459
 460                 input-enable;
 461                 bias-pull-down;
 462                 drive-strength = <2>;
 463         };
 464 };
 465
 466 &uart6 {
 467         status = "okay";
 468
 469         bluetooth {
 470                 compatible = "qcom,wcn3990-bt";
 471
 472                 vddio-supply = <&vreg_s4a_1p8>;
 473                 vddxo-supply = <&vreg_l7a_1p8>;
 474                 vddrf-supply = <&vreg_l17a_1p3>;
 475                 vddch0-supply = <&vreg_l25a_3p3>;
 476                 max-speed = <3200000>;
 477         };
 478 };
 479
 480 &ufs_mem_hc {
 481         status = "okay";
 482
 483         vcc-supply = <&vreg_l20a_2p95>;
 484         vcc-max-microamp = <600000>;
 485 };
 486
 487 &ufs_mem_phy {
 488         status = "okay";
 489
 490         vdda-phy-supply = <&vdda_ufs1_core>;
 491         vdda-pll-supply = <&vdda_ufs1_1p2>;
 492 };
 493
 494 &usb_1 {
 495         status = "okay";
 496 };
 497
 498 &usb_1_dwc3 {
 499         dr_mode = "host";
 500 };
 501
 502 &usb_1_hsphy {
 503         status = "okay";
 504
 505         vdd-supply = <&vdda_usb1_ss_core>;
 506         vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
 507         vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
 508
 509         qcom,imp-res-offset-value = <8>;
 510         qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
 511         qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
 512         qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
 513 };
 514
 515 &usb_1_qmpphy {
 516         status = "okay";
 517
 518         vdda-phy-supply = <&vdda_usb1_ss_1p2>;
 519         vdda-pll-supply = <&vdda_usb1_ss_core>;
 520 };
 521
 522 &usb_2 {
 523         status = "okay";
 524 };
 525
 526 &usb_2_dwc3 {
 527         dr_mode = "host";
 528 };
 529
 530 &usb_2_hsphy {
 531         status = "okay";
 532
 533         vdd-supply = <&vdda_usb2_ss_core>;
 534         vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
 535         vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
 536
 537         qcom,imp-res-offset-value = <8>;
 538         qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
 539 };
 540
 541 &usb_2_qmpphy {
 542         status = "okay";
 543
 544         vdda-phy-supply = <&vdda_usb2_ss_1p2>;
 545         vdda-pll-supply = <&vdda_usb2_ss_core>;
 546 };
 547
 548 &wcd9340{
 549         pinctrl-0 = <&wcd_intr_default>;
 550         pinctrl-names = "default";
 551         clock-names = "extclk";
 552         clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
 553         reset-gpios = <&tlmm 64 0>;
 554         vdd-buck-supply = <&vreg_s4a_1p8>;
 555         vdd-buck-sido-supply = <&vreg_s4a_1p8>;
 556         vdd-tx-supply = <&vreg_s4a_1p8>;
 557         vdd-rx-supply = <&vreg_s4a_1p8>;
 558         vdd-io-supply = <&vreg_s4a_1p8>;
 559
 560         swm: swm@c85 {
 561                 left_spkr: wsa8810-left{
 562                         compatible = "sdw10217211000";
 563                         reg = <0 3>;
 564                         powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
 565                         #thermal-sensor-cells = <0>;
 566                         sound-name-prefix = "SpkrLeft";
 567                         #sound-dai-cells = <0>;
 568                 };
 569
 570                 right_spkr: wsa8810-right{
 571                         compatible = "sdw10217211000";
 572                         powerdown-gpios = <&wcdgpio 3 GPIO_ACTIVE_HIGH>;
 573                         reg = <0 4>;
 574                         #thermal-sensor-cells = <0>;
 575                         sound-name-prefix = "SpkrRight";
 576                         #sound-dai-cells = <0>;
 577                 };
 578         };
 579 };