arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
   4  * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
   5  * Copyright (c) 2020 Tobias Schramm <t.schramm@manjaro.org>
   6  */
   7
   8 /dts-v1/;
   9 #include <dt-bindings/input/gpio-keys.h>
  10 #include <dt-bindings/input/linux-event-codes.h>
  11 #include <dt-bindings/pwm/pwm.h>
  12 #include <dt-bindings/usb/pd.h>
  13 #include <dt-bindings/leds/common.h>
  14 #include "rk3399.dtsi"
  15 #include "rk3399-opp.dtsi"
  16
  17 / {
  18         model = "Pine64 Pinebook Pro";
  19         compatible = "pine64,pinebook-pro", "rockchip,rk3399";
  20
  21         chosen {
  22                 stdout-path = "serial2:1500000n8";
  23         };
  24
  25         backlight: edp-backlight {
  26                 compatible = "pwm-backlight";
  27                 power-supply = <&vcc_12v>;
  28                 pwms = <&pwm0 0 740740 0>;
  29         };
  30
  31         edp_panel: edp-panel {
  32                 compatible = "boe,nv140fhmn49";
  33                 backlight = <&backlight>;
  34                 enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
  35                 pinctrl-names = "default";
  36                 pinctrl-0 = <&panel_en_gpio>;
  37                 power-supply = <&vcc3v3_panel>;
  38
  39                 ports {
  40                         #address-cells = <1>;
  41                         #size-cells = <0>;
  42
  43                         port@0 {
  44                                 reg = <0>;
  45                                 #address-cells = <1>;
  46                                 #size-cells = <0>;
  47
  48                                 panel_in_edp: endpoint@0 {
  49                                         reg = <0>;
  50                                         remote-endpoint = <&edp_out_panel>;
  51                                 };
  52                         };
  53                 };
  54         };
  55
  56         /*
  57          * Use separate nodes for gpio-keys to allow for selective deactivation
  58          * of wakeup sources via sysfs without disabling the whole key
  59          */
  60         gpio-key-lid {
  61                 compatible = "gpio-keys";
  62                 pinctrl-names = "default";
  63                 pinctrl-0 = <&lidbtn_gpio>;
  64
  65                 lid {
  66                         debounce-interval = <20>;
  67                         gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>;
  68                         label = "Lid";
  69                         linux,code = <SW_LID>;
  70                         linux,input-type = <EV_SW>;
  71                         wakeup-event-action = <EV_ACT_DEASSERTED>;
  72                         wakeup-source;
  73                 };
  74         };
  75
  76         gpio-key-power {
  77                 compatible = "gpio-keys";
  78                 pinctrl-names = "default";
  79                 pinctrl-0 = <&pwrbtn_gpio>;
  80
  81                 power {
  82                         debounce-interval = <20>;
  83                         gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
  84                         label = "Power";
  85                         linux,code = <KEY_POWER>;
  86                         wakeup-source;
  87                 };
  88         };
  89
  90         leds {
  91                 compatible = "gpio-leds";
  92                 pinctrl-names = "default";
  93                 pinctrl-0 = <&pwrled_gpio &slpled_gpio>;
  94
  95                 green-led {
  96                         color = <LED_COLOR_ID_GREEN>;
  97                         default-state = "on";
  98                         function = LED_FUNCTION_POWER;
  99                         gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
 100                         label = "green:power";
 101                 };
 102
 103                 red-led {
 104                         color = <LED_COLOR_ID_RED>;
 105                         default-state = "off";
 106                         function = LED_FUNCTION_STANDBY;
 107                         gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
 108                         label = "red:standby";
 109                         panic-indicator;
 110                         retain-state-suspended;
 111                 };
 112         };
 113
 114         /* Power sequence for SDIO WiFi module */
 115         sdio_pwrseq: sdio-pwrseq {
 116                 compatible = "mmc-pwrseq-simple";
 117                 clocks = <&rk808 1>;
 118                 clock-names = "ext_clock";
 119                 pinctrl-names = "default";
 120                 pinctrl-0 = <&wifi_enable_h_gpio>;
 121                 post-power-on-delay-ms = <100>;
 122                 power-off-delay-us = <500000>;
 123
 124                 /* WL_REG_ON on module */
 125                 reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
 126         };
 127
 128         /* Audio components */
 129         es8316-sound {
 130                 compatible = "simple-audio-card";
 131                 pinctrl-names = "default";
 132                 pinctrl-0 = <&hp_det_gpio>;
 133                 simple-audio-card,name = "rockchip,es8316-codec";
 134                 simple-audio-card,format = "i2s";
 135                 simple-audio-card,mclk-fs = <256>;
 136
 137                 simple-audio-card,widgets =
 138                         "Microphone", "Mic Jack",
 139                         "Headphone", "Headphones",
 140                         "Speaker", "Speaker";
 141                 simple-audio-card,routing =
 142                         "MIC1", "Mic Jack",
 143                         "Headphones", "HPOL",
 144                         "Headphones", "HPOR",
 145                         "Speaker Amplifier INL", "HPOL",
 146                         "Speaker Amplifier INR", "HPOR",
 147                         "Speaker", "Speaker Amplifier OUTL",
 148                         "Speaker", "Speaker Amplifier OUTR";
 149
 150                 simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
 151                 simple-audio-card,aux-devs = <&speaker_amp>;
 152                 simple-audio-card,pin-switches = "Speaker";
 153
 154                 simple-audio-card,cpu {
 155                         sound-dai = <&i2s1>;
 156                 };
 157
 158                 simple-audio-card,codec {
 159                         sound-dai = <&es8316>;
 160                 };
 161         };
 162
 163         speaker_amp: speaker-amplifier {
 164                 compatible = "simple-audio-amplifier";
 165                 enable-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
 166                 sound-name-prefix = "Speaker Amplifier";
 167                 VCC-supply = <&pa_5v>;
 168         };
 169
 170         /* Power tree */
 171         /* Root power source */
 172         vcc_sysin: vcc-sysin {
 173                 compatible = "regulator-fixed";
 174                 regulator-name = "vcc_sysin";
 175                 regulator-always-on;
 176                 regulator-boot-on;
 177         };
 178
 179         /* Regulators supplied by vcc_sysin */
 180         /* LCD backlight supply */
 181         vcc_12v: vcc-12v {
 182                 compatible = "regulator-fixed";
 183                 regulator-name = "vcc_12v";
 184                 regulator-always-on;
 185                 regulator-boot-on;
 186                 regulator-min-microvolt = <12000000>;
 187                 regulator-max-microvolt = <12000000>;
 188                 vin-supply = <&vcc_sysin>;
 189
 190                 regulator-state-mem {
 191                         regulator-off-in-suspend;
 192                 };
 193         };
 194
 195         /* Main 3.3 V supply */
 196         vcc3v3_sys: wifi_bat: vcc3v3-sys {
 197                 compatible = "regulator-fixed";
 198                 regulator-name = "vcc3v3_sys";
 199                 regulator-always-on;
 200                 regulator-boot-on;
 201                 regulator-min-microvolt = <3300000>;
 202                 regulator-max-microvolt = <3300000>;
 203                 vin-supply = <&vcc_sysin>;
 204
 205                 regulator-state-mem {
 206                         regulator-on-in-suspend;
 207                 };
 208         };
 209
 210         /* 5 V USB power supply */
 211         vcc5v0_usb: pa_5v: vcc5v0-usb-regulator {
 212                 compatible = "regulator-fixed";
 213                 enable-active-high;
 214                 gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
 215                 pinctrl-names = "default";
 216                 pinctrl-0 = <&pwr_5v_gpio>;
 217                 regulator-name = "vcc5v0_usb";
 218                 regulator-always-on;
 219                 regulator-min-microvolt = <5000000>;
 220                 regulator-max-microvolt = <5000000>;
 221                 vin-supply = <&vcc_sysin>;
 222
 223                 regulator-state-mem {
 224                         regulator-off-in-suspend;
 225                 };
 226         };
 227
 228         /* RK3399 logic supply */
 229         vdd_log: vdd-log {
 230                 compatible = "pwm-regulator";
 231                 pwms = <&pwm2 0 25000 1>;
 232                 regulator-name = "vdd_log";
 233                 regulator-always-on;
 234                 regulator-boot-on;
 235                 regulator-min-microvolt = <800000>;
 236                 regulator-max-microvolt = <1400000>;
 237                 vin-supply = <&vcc_sysin>;
 238
 239                 regulator-state-mem {
 240                         regulator-on-in-suspend;
 241                 };
 242         };
 243
 244         /* Regulators supplied by vcc3v3_sys */
 245         /* 0.9 V supply, always on */
 246         vcc_0v9: vcc-0v9 {
 247                 compatible = "regulator-fixed";
 248                 regulator-name = "vcc_0v9";
 249                 regulator-always-on;
 250                 regulator-boot-on;
 251                 regulator-min-microvolt = <900000>;
 252                 regulator-max-microvolt = <900000>;
 253                 vin-supply = <&vcc3v3_sys>;
 254         };
 255
 256         /* S3 1.8 V supply, switched by vcc1v8_s3 */
 257         vcca1v8_s3: vcc1v8-s3 {
 258                 compatible = "regulator-fixed";
 259                 regulator-name = "vcca1v8_s3";
 260                 regulator-always-on;
 261                 regulator-boot-on;
 262                 regulator-min-microvolt = <1800000>;
 263                 regulator-max-microvolt = <1800000>;
 264                 vin-supply = <&vcc3v3_sys>;
 265         };
 266
 267         /* micro SD card power */
 268         vcc3v0_sd: vcc3v0-sd {
 269                 compatible = "regulator-fixed";
 270                 enable-active-high;
 271                 gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
 272                 pinctrl-names = "default";
 273                 pinctrl-0 = <&sdmmc0_pwr_h_gpio>;
 274                 regulator-name = "vcc3v0_sd";
 275                 regulator-always-on;
 276                 regulator-min-microvolt = <3000000>;
 277                 regulator-max-microvolt = <3000000>;
 278                 vin-supply = <&vcc3v3_sys>;
 279
 280                 regulator-state-mem {
 281                         regulator-off-in-suspend;
 282                 };
 283         };
 284
 285         /* LCD panel power, called VCC3V3_S0 in schematic */
 286         vcc3v3_panel: vcc3v3-panel {
 287                 compatible = "regulator-fixed";
 288                 enable-active-high;
 289                 gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
 290                 pinctrl-names = "default";
 291                 pinctrl-0 = <&lcdvcc_en_gpio>;
 292                 regulator-name = "vcc3v3_panel";
 293                 regulator-always-on;
 294                 regulator-min-microvolt = <3300000>;
 295                 regulator-max-microvolt = <3300000>;
 296                 regulator-enable-ramp-delay = <100000>;
 297                 vin-supply = <&vcc3v3_sys>;
 298
 299                 regulator-state-mem {
 300                         regulator-off-in-suspend;
 301                 };
 302         };
 303
 304         /* M.2 adapter power, switched by vcc1v8_s3 */
 305         vcc3v3_ssd: vcc3v3-ssd {
 306                 compatible = "regulator-fixed";
 307                 regulator-name = "vcc3v3_ssd";
 308                 regulator-min-microvolt = <3300000>;
 309                 regulator-max-microvolt = <3300000>;
 310                 vin-supply = <&vcc3v3_sys>;
 311         };
 312
 313         /* Regulators supplied by vcc5v0_usb */
 314         /* USB 3 port power supply regulator  */
 315         vcc5v0_otg: vcc5v0-otg {
 316                 compatible = "regulator-fixed";
 317                 enable-active-high;
 318                 gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
 319                 pinctrl-names = "default";
 320                 pinctrl-0 = <&vcc5v0_host_en_gpio>;
 321                 regulator-name = "vcc5v0_otg";
 322                 regulator-always-on;
 323                 regulator-min-microvolt = <5000000>;
 324                 regulator-max-microvolt = <5000000>;
 325                 vin-supply = <&vcc5v0_usb>;
 326
 327                 regulator-state-mem {
 328                         regulator-off-in-suspend;
 329                 };
 330         };
 331
 332         /* Regulators supplied by vcc5v0_usb */
 333         /* Type C port power supply regulator */
 334         vbus_5vout: vbus_typec: vbus-5vout {
 335                 compatible = "regulator-fixed";
 336                 enable-active-high;
 337                 gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
 338                 pinctrl-names = "default";
 339                 pinctrl-0 = <&vcc5v0_typec0_en_gpio>;
 340                 regulator-name = "vbus_5vout";
 341                 regulator-min-microvolt = <5000000>;
 342                 regulator-max-microvolt = <5000000>;
 343                 vin-supply = <&vcc5v0_usb>;
 344
 345                 regulator-state-mem {
 346                         regulator-off-in-suspend;
 347                 };
 348         };
 349
 350         /* Regulators supplied by vcc_1v8 */
 351         /* Primary 0.9 V LDO */
 352         vcca0v9_s3: vcca0v9-s3 {
 353                 compatible = "regulator-fixed";
 354                 regulator-name = "vcc0v9_s3";
 355                 regulator-min-microvolt = <5000000>;
 356                 regulator-max-microvolt = <5000000>;
 357                 vin-supply = <&vcc_1v8>;
 358
 359                 regulator-state-mem {
 360                         regulator-on-in-suspend;
 361                 };
 362         };
 363
 364         mains_charger: dc-charger {
 365                 compatible = "gpio-charger";
 366                 charger-type = "mains";
 367                 gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_LOW>;
 368
 369                 /* Also triggered by USB charger */
 370                 pinctrl-names = "default";
 371                 pinctrl-0 = <&dc_det_gpio>;
 372         };
 373 };
 374
 375 &cdn_dp {
 376         status = "okay";
 377 };
 378
 379 &cpu_b0 {
 380         cpu-supply = <&vdd_cpu_b>;
 381 };
 382
 383 &cpu_b1 {
 384         cpu-supply = <&vdd_cpu_b>;
 385 };
 386
 387 &cpu_l0 {
 388         cpu-supply = <&vdd_cpu_l>;
 389 };
 390
 391 &cpu_l1 {
 392         cpu-supply = <&vdd_cpu_l>;
 393 };
 394
 395 &cpu_l2 {
 396         cpu-supply = <&vdd_cpu_l>;
 397 };
 398
 399 &cpu_l3 {
 400         cpu-supply = <&vdd_cpu_l>;
 401 };
 402
 403 &edp {
 404         force-hpd;
 405         pinctrl-names = "default";
 406         pinctrl-0 = <&edp_hpd>;
 407         status = "okay";
 408
 409         ports {
 410                 edp_out: port@1 {
 411                         reg = <1>;
 412                         #address-cells = <1>;
 413                         #size-cells = <0>;
 414
 415                         edp_out_panel: endpoint@0 {
 416                                 reg = <0>;
 417                                 remote-endpoint = <&panel_in_edp>;
 418                         };
 419                 };
 420         };
 421 };
 422
 423 &emmc_phy {
 424         status = "okay";
 425 };
 426
 427 &gpu {
 428         mali-supply = <&vdd_gpu>;
 429         status = "okay";
 430 };
 431
 432 &hdmi_sound {
 433         status = "okay";
 434 };
 435
 436 &i2c0 {
 437         clock-frequency = <400000>;
 438         i2c-scl-falling-time-ns = <4>;
 439         i2c-scl-rising-time-ns = <168>;
 440         status = "okay";
 441
 442         rk808: pmic@1b {
 443                 compatible = "rockchip,rk808";
 444                 reg = <0x1b>;
 445                 #clock-cells = <1>;
 446                 clock-output-names = "xin32k", "rk808-clkout2";
 447                 interrupt-parent = <&gpio3>;
 448                 interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
 449                 pinctrl-names = "default";
 450                 pinctrl-0 = <&pmic_int_l_gpio>;
 451                 rockchip,system-power-controller;
 452                 wakeup-source;
 453
 454                 vcc1-supply = <&vcc_sysin>;
 455                 vcc2-supply = <&vcc_sysin>;
 456                 vcc3-supply = <&vcc_sysin>;
 457                 vcc4-supply = <&vcc_sysin>;
 458                 vcc6-supply = <&vcc_sysin>;
 459                 vcc7-supply = <&vcc_sysin>;
 460                 vcc8-supply = <&vcc3v3_sys>;
 461                 vcc9-supply = <&vcc_sysin>;
 462                 vcc10-supply = <&vcc_sysin>;
 463                 vcc11-supply = <&vcc_sysin>;
 464                 vcc12-supply = <&vcc3v3_sys>;
 465                 vcc13-supply = <&vcc_sysin>;
 466                 vcc14-supply = <&vcc_sysin>;
 467
 468                 regulators {
 469                         /* rk3399 center logic supply */
 470                         vdd_center: DCDC_REG1 {
 471                                 regulator-name = "vdd_center";
 472                                 regulator-always-on;
 473                                 regulator-boot-on;
 474                                 regulator-min-microvolt = <750000>;
 475                                 regulator-max-microvolt = <1350000>;
 476                                 regulator-ramp-delay = <6001>;
 477
 478                                 regulator-state-mem {
 479                                         regulator-off-in-suspend;
 480                                 };
 481                         };
 482
 483                         vdd_cpu_l: DCDC_REG2 {
 484                                 regulator-name = "vdd_cpu_l";
 485                                 regulator-always-on;
 486                                 regulator-boot-on;
 487                                 regulator-min-microvolt = <750000>;
 488                                 regulator-max-microvolt = <1350000>;
 489                                 regulator-ramp-delay = <6001>;
 490
 491                                 regulator-state-mem {
 492                                         regulator-off-in-suspend;
 493                                 };
 494                         };
 495
 496                         vcc_ddr: DCDC_REG3 {
 497                                 regulator-name = "vcc_ddr";
 498                                 regulator-always-on;
 499                                 regulator-boot-on;
 500
 501                                 regulator-state-mem {
 502                                         regulator-on-in-suspend;
 503                                 };
 504                         };
 505
 506                         vcc_1v8: vcc_wl: DCDC_REG4 {
 507                                 regulator-name = "vcc_1v8";
 508                                 regulator-always-on;
 509                                 regulator-boot-on;
 510                                 regulator-min-microvolt = <1800000>;
 511                                 regulator-max-microvolt = <1800000>;
 512
 513                                 regulator-state-mem {
 514                                         regulator-on-in-suspend;
 515                                         regulator-suspend-microvolt = <1800000>;
 516                                 };
 517                         };
 518
 519                         /* not used */
 520                         LDO_REG1 {
 521                         };
 522
 523                         /* not used */
 524                         LDO_REG2 {
 525                         };
 526
 527                         vcc1v8_pmupll: LDO_REG3 {
 528                                 regulator-name = "vcc1v8_pmupll";
 529                                 regulator-always-on;
 530                                 regulator-boot-on;
 531                                 regulator-min-microvolt = <1800000>;
 532                                 regulator-max-microvolt = <1800000>;
 533
 534                                 regulator-state-mem {
 535                                         regulator-on-in-suspend;
 536                                         regulator-suspend-microvolt = <1800000>;
 537                                 };
 538                         };
 539
 540                         vcc_sdio: LDO_REG4 {
 541                                 regulator-name = "vcc_sdio";
 542                                 regulator-always-on;
 543                                 regulator-boot-on;
 544                                 regulator-min-microvolt = <1800000>;
 545                                 regulator-max-microvolt = <3000000>;
 546
 547                                 regulator-state-mem {
 548                                         regulator-on-in-suspend;
 549                                         regulator-suspend-microvolt = <3000000>;
 550                                 };
 551                         };
 552
 553                         vcca3v0_codec: LDO_REG5 {
 554                                 regulator-name = "vcca3v0_codec";
 555                                 regulator-always-on;
 556                                 regulator-boot-on;
 557                                 regulator-min-microvolt = <3000000>;
 558                                 regulator-max-microvolt = <3000000>;
 559
 560                                 regulator-state-mem {
 561                                         regulator-off-in-suspend;
 562                                 };
 563                         };
 564
 565                         vcc_1v5: LDO_REG6 {
 566                                 regulator-name = "vcc_1v5";
 567                                 regulator-always-on;
 568                                 regulator-boot-on;
 569                                 regulator-min-microvolt = <1500000>;
 570                                 regulator-max-microvolt = <1500000>;
 571
 572                                 regulator-state-mem {
 573                                         regulator-on-in-suspend;
 574                                         regulator-suspend-microvolt = <1500000>;
 575                                 };
 576                         };
 577
 578                         vcca1v8_codec: LDO_REG7 {
 579                                 regulator-name = "vcca1v8_codec";
 580                                 regulator-always-on;
 581                                 regulator-boot-on;
 582                                 regulator-min-microvolt = <1800000>;
 583                                 regulator-max-microvolt = <1800000>;
 584
 585                                 regulator-state-mem {
 586                                         regulator-off-in-suspend;
 587                                 };
 588                         };
 589
 590                         vcc_3v0: LDO_REG8 {
 591                                 regulator-name = "vcc_3v0";
 592                                 regulator-always-on;
 593                                 regulator-boot-on;
 594                                 regulator-min-microvolt = <3000000>;
 595                                 regulator-max-microvolt = <3000000>;
 596
 597                                 regulator-state-mem {
 598                                         regulator-on-in-suspend;
 599                                         regulator-suspend-microvolt = <3000000>;
 600                                 };
 601                         };
 602
 603                         vcc3v3_s3: SWITCH_REG1 {
 604                                 regulator-name = "vcc3v3_s3";
 605                                 regulator-always-on;
 606                                 regulator-boot-on;
 607
 608                                 regulator-state-mem {
 609                                         regulator-off-in-suspend;
 610                                 };
 611                         };
 612
 613                         vcc3v3_s0: SWITCH_REG2 {
 614                                 regulator-name = "vcc3v3_s0";
 615                                 regulator-always-on;
 616                                 regulator-boot-on;
 617
 618                                 regulator-state-mem {
 619                                         regulator-off-in-suspend;
 620                                 };
 621                         };
 622                 };
 623         };
 624
 625         vdd_cpu_b: regulator@40 {
 626                 compatible = "silergy,syr827";
 627                 reg = <0x40>;
 628                 fcs,suspend-voltage-selector = <1>;
 629                 pinctrl-names = "default";
 630                 pinctrl-0 = <&vsel1_gpio>;
 631                 regulator-name = "vdd_cpu_b";
 632                 regulator-always-on;
 633                 regulator-boot-on;
 634                 regulator-min-microvolt = <712500>;
 635                 regulator-max-microvolt = <1500000>;
 636                 regulator-ramp-delay = <1000>;
 637                 vin-supply = <&vcc_1v8>;
 638
 639                 regulator-state-mem {
 640                         regulator-off-in-suspend;
 641                 };
 642         };
 643
 644         vdd_gpu: regulator@41 {
 645                 compatible = "silergy,syr828";
 646                 reg = <0x41>;
 647                 fcs,suspend-voltage-selector = <1>;
 648                 pinctrl-names = "default";
 649                 pinctrl-0 = <&vsel2_gpio>;
 650                 regulator-name = "vdd_gpu";
 651                 regulator-always-on;
 652                 regulator-boot-on;
 653                 regulator-min-microvolt = <712500>;
 654                 regulator-max-microvolt = <1500000>;
 655                 regulator-ramp-delay = <1000>;
 656                 vin-supply = <&vcc_1v8>;
 657
 658                 regulator-state-mem {
 659                         regulator-off-in-suspend;
 660                 };
 661         };
 662 };
 663
 664 &i2c1 {
 665         clock-frequency = <100000>;
 666         i2c-scl-falling-time-ns = <4>;
 667         i2c-scl-rising-time-ns = <168>;
 668         status = "okay";
 669
 670         es8316: es8316@11 {
 671                 compatible = "everest,es8316";
 672                 reg = <0x11>;
 673                 clocks = <&cru SCLK_I2S_8CH_OUT>;
 674                 clock-names = "mclk";
 675                 #sound-dai-cells = <0>;
 676         };
 677 };
 678
 679 &i2c3 {
 680         i2c-scl-falling-time-ns = <15>;
 681         i2c-scl-rising-time-ns = <450>;
 682         status = "okay";
 683 };
 684
 685 &i2c4 {
 686         i2c-scl-falling-time-ns = <20>;
 687         i2c-scl-rising-time-ns = <600>;
 688         status = "okay";
 689
 690         fusb0: fusb30x@22 {
 691                 compatible = "fcs,fusb302";
 692                 reg = <0x22>;
 693                 fcs,int_n = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
 694                 pinctrl-names = "default";
 695                 pinctrl-0 = <&fusb0_int_gpio>;
 696                 vbus-supply = <&vbus_typec>;
 697
 698                 connector {
 699                         compatible = "usb-c-connector";
 700                         data-role = "host";
 701                         label = "USB-C";
 702                         op-sink-microwatt = <1000000>;
 703                         power-role = "dual";
 704                         sink-pdos =
 705                                 <PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>;
 706                         source-pdos =
 707                                 <PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
 708                         try-power-role = "sink";
 709
 710                         ports {
 711                                 #address-cells = <1>;
 712                                 #size-cells = <0>;
 713
 714                                 port@0 {
 715                                         reg = <0>;
 716
 717                                         usbc_hs: endpoint {
 718                                                 remote-endpoint =
 719                                                         <&u2phy0_typec_hs>;
 720                                         };
 721                                 };
 722
 723                                 port@1 {
 724                                         reg = <1>;
 725
 726                                         usbc_ss: endpoint {
 727                                                 remote-endpoint =
 728                                                         <&tcphy0_typec_ss>;
 729                                         };
 730                                 };
 731
 732                                 port@2 {
 733                                         reg = <2>;
 734
 735                                         usbc_dp: endpoint {
 736                                                 remote-endpoint =
 737                                                         <&tcphy0_typec_dp>;
 738                                         };
 739                                 };
 740                         };
 741                 };
 742         };
 743 };
 744
 745 &i2s1 {
 746         #sound-dai-cells = <0>;
 747         pinctrl-names = "default";
 748         pinctrl-0 = <&i2s_8ch_mclk_gpio>, <&i2s1_2ch_bus>;
 749         rockchip,capture-channels = <8>;
 750         rockchip,playback-channels = <8>;
 751         status = "okay";
 752 };
 753
 754 &io_domains {
 755         audio-supply = <&vcc_3v0>;
 756         gpio1830-supply = <&vcc_3v0>;
 757         sdmmc-supply = <&vcc_sdio>;
 758         status = "okay";
 759 };
 760
 761 &pcie_phy {
 762         status = "okay";
 763 };
 764
 765 &pcie0 {
 766         bus-scan-delay-ms = <1000>;
 767         ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
 768         max-link-speed = <2>;
 769         num-lanes = <4>;
 770         pinctrl-names = "default";
 771         pinctrl-0 = <&pcie_clkreqn_cpm>;
 772         vpcie0v9-supply = <&vcca0v9_s3>;
 773         vpcie1v8-supply = <&vcca1v8_s3>;
 774         vpcie3v3-supply = <&vcc3v3_ssd>;
 775         status = "okay";
 776 };
 777
 778 &pinctrl {
 779         buttons {
 780                 pwrbtn_gpio: pwrbtn-gpio {
 781                         rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
 782                 };
 783
 784                 lidbtn_gpio: lidbtn-gpio {
 785                         rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
 786                 };
 787         };
 788
 789         dc-charger {
 790                 dc_det_gpio: dc-det-gpio {
 791                         rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
 792                 };
 793         };
 794
 795         es8316 {
 796                 hp_det_gpio: hp-det-gpio {
 797                         rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
 798                 };
 799         };
 800
 801         fusb302x {
 802                 fusb0_int_gpio: fusb0-int-gpio {
 803                         rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
 804                 };
 805         };
 806
 807         i2s1 {
 808                 i2s_8ch_mclk_gpio: i2s-8ch-mclk-gpio {
 809                         rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>;
 810                 };
 811         };
 812
 813         lcd-panel {
 814                 lcdvcc_en_gpio: lcdvcc-en-gpio {
 815                         rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
 816                 };
 817
 818                 panel_en_gpio: panel-en-gpio {
 819                         rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
 820                 };
 821
 822                 lcd_panel_reset_gpio: lcd-panel-reset-gpio {
 823                         rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
 824                 };
 825         };
 826
 827         leds {
 828                 pwrled_gpio: pwrled_gpio {
 829                         rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
 830                 };
 831
 832                 slpled_gpio: slpled_gpio {
 833                         rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 834                 };
 835         };
 836
 837         pmic {
 838                 pmic_int_l_gpio: pmic-int-l-gpio {
 839                         rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
 840                 };
 841
 842                 vsel1_gpio: vsel1-gpio {
 843                         rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
 844                 };
 845
 846                 vsel2_gpio: vsel2-gpio {
 847                         rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 848                 };
 849         };
 850
 851         sdcard {
 852                 sdmmc0_pwr_h_gpio: sdmmc0-pwr-h-gpio {
 853                         rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
 854                 };
 855
 856         };
 857
 858         sdio-pwrseq {
 859                 wifi_enable_h_gpio: wifi-enable-h-gpio {
 860                         rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
 861                 };
 862         };
 863
 864         usb-typec {
 865                 vcc5v0_typec0_en_gpio: vcc5v0-typec0-en-gpio {
 866                         rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
 867                 };
 868         };
 869
 870         usb2 {
 871                 pwr_5v_gpio: pwr-5v-gpio {
 872                         rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
 873                 };
 874
 875                 vcc5v0_host_en_gpio: vcc5v0-host-en-gpio {
 876                         rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
 877                 };
 878         };
 879
 880         wireless-bluetooth {
 881                 bt_wake_gpio: bt-wake-gpio {
 882                         rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
 883                 };
 884
 885                 bt_host_wake_gpio: bt-host-wake-gpio {
 886                         rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
 887                 };
 888
 889                 bt_reset_gpio: bt-reset-gpio {
 890                         rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
 891                 };
 892         };
 893 };
 894
 895 &pmu_io_domains {
 896         pmu1830-supply = <&vcc_3v0>;
 897         status = "okay";
 898 };
 899
 900 &pwm0 {
 901         status = "okay";
 902 };
 903
 904 &pwm2 {
 905         status = "okay";
 906 };
 907
 908 &saradc {
 909         vref-supply = <&vcca1v8_s3>;
 910         status = "okay";
 911 };
 912
 913 &sdmmc {
 914         bus-width = <4>;
 915         cap-mmc-highspeed;
 916         cap-sd-highspeed;
 917         cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
 918         disable-wp;
 919         pinctrl-names = "default";
 920         pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
 921         sd-uhs-sdr104;
 922         vmmc-supply = <&vcc3v0_sd>;
 923         vqmmc-supply = <&vcc_sdio>;
 924         status = "okay";
 925 };
 926
 927 &sdio0 {
 928         bus-width = <4>;
 929         cap-sd-highspeed;
 930         cap-sdio-irq;
 931         keep-power-in-suspend;
 932         mmc-pwrseq = <&sdio_pwrseq>;
 933         non-removable;
 934         pinctrl-names = "default";
 935         pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
 936         sd-uhs-sdr104;
 937         status = "okay";
 938 };
 939
 940 &sdhci {
 941         bus-width = <8>;
 942         mmc-hs200-1_8v;
 943         non-removable;
 944         status = "okay";
 945 };
 946
 947 &spi1 {
 948         max-freq = <10000000>;
 949         status = "okay";
 950
 951         spiflash: flash@0 {
 952                 compatible = "jedec,spi-nor";
 953                 reg = <0>;
 954                 m25p,fast-read;
 955                 spi-max-frequency = <10000000>;
 956         };
 957 };
 958
 959 &tcphy0 {
 960         status = "okay";
 961 };
 962
 963 &tcphy0_dp {
 964         port {
 965                 tcphy0_typec_dp: endpoint {
 966                         remote-endpoint = <&usbc_dp>;
 967                 };
 968         };
 969 };
 970
 971 &tcphy0_usb3 {
 972         port {
 973                 tcphy0_typec_ss: endpoint {
 974                         remote-endpoint = <&usbc_ss>;
 975                 };
 976         };
 977 };
 978
 979 &tcphy1 {
 980         status = "okay";
 981 };
 982
 983 &tsadc {
 984         /* tshut mode 0:CRU 1:GPIO */
 985         rockchip,hw-tshut-mode = <1>;
 986         /* tshut polarity 0:LOW 1:HIGH */
 987         rockchip,hw-tshut-polarity = <1>;
 988         status = "okay";
 989 };
 990
 991 &u2phy0 {
 992         status = "okay";
 993
 994         u2phy0_otg: otg-port {
 995                 status = "okay";
 996         };
 997
 998         u2phy0_host: host-port {
 999                 phy-supply = <&vcc5v0_otg>;
1000                 status = "okay";
1001         };
1002
1003         port {
1004                 u2phy0_typec_hs: endpoint {
1005                         remote-endpoint = <&usbc_hs>;
1006                 };
1007         };
1008 };
1009
1010 &u2phy1 {
1011         status = "okay";
1012
1013         u2phy1_otg: otg-port {
1014                 status = "okay";
1015         };
1016
1017         u2phy1_host: host-port {
1018                 phy-supply = <&vcc5v0_otg>;
1019                 status = "okay";
1020         };
1021 };
1022
1023 &uart0 {
1024         pinctrl-names = "default";
1025         pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
1026         uart-has-rtscts;
1027         status = "okay";
1028
1029         bluetooth {
1030                 compatible = "brcm,bcm4345c5";
1031                 clocks = <&rk808 1>;
1032                 clock-names = "lpo";
1033                 device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
1034                 host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
1035                 max-speed = <1500000>;
1036                 pinctrl-names = "default";
1037                 pinctrl-0 = <&bt_host_wake_gpio &bt_wake_gpio &bt_reset_gpio>;
1038                 shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
1039                 vbat-supply = <&wifi_bat>;
1040                 vddio-supply = <&vcc_wl>;
1041         };
1042 };
1043
1044 &uart2 {
1045         status = "okay";
1046 };
1047
1048 &usb_host0_ehci {
1049         status = "okay";
1050 };
1051
1052 &usb_host0_ohci {
1053         status = "okay";
1054 };
1055
1056 &usb_host1_ehci {
1057         status = "okay";
1058 };
1059
1060 &usb_host1_ohci {
1061         status = "okay";
1062 };
1063
1064 &usbdrd3_0 {
1065         status = "okay";
1066 };
1067
1068 &usbdrd_dwc3_0 {
1069         dr_mode = "host";
1070         status = "okay";
1071 };
1072
1073 &usbdrd3_1 {
1074         status = "okay";
1075 };
1076
1077 &usbdrd_dwc3_1 {
1078         dr_mode = "host";
1079         status = "okay";
1080 };
1081
1082 &vopb {
1083         status = "okay";
1084 };
1085
1086 &vopb_mmu {
1087         status = "okay";
1088 };
1089
1090 &vopl {
1091         status = "okay";
1092 };
1093
1094 &vopl_mmu {
1095         status = "okay";
1096 };