arch/blackfin/mach-bf518/Kconfig

   1 # SPDX-License-Identifier: GPL-2.0
   2 config BF51x
   3         def_bool y
   4         depends on (BF512 || BF514 || BF516 || BF518)
   5
   6 if (BF51x)
   7
   8 source "arch/blackfin/mach-bf518/boards/Kconfig"
   9
  10 menu "BF518 Specific Configuration"
  11
  12 comment "Alternative Multiplexing Scheme"
  13
  14 choice
  15         prompt "PWM Channel Pins"
  16         default BF518_PWM_ALL_PORTF
  17         help
  18           Select pins used for the PWM channels:
  19             PWM_AH PWM_AL PWM_BH PWM_BL PWM_CH PWM_CL
  20
  21           See the Hardware Reference Manual for more details.
  22
  23 config BF518_PWM_ALL_PORTF
  24         bool "PF1 - PF6"
  25         help
  26           PF{1,2,3,4,5,6} <-> PWM_{AH,AL,BH,BL,CH,CL}
  27
  28 config BF518_PWM_PORTF_PORTG
  29         bool "PF11 - PF14 / PG1 - PG2"
  30         help
  31           PF{11,12,13,14} <-> PWM_{AH,AL,BH,BL}
  32           PG{1,2} <-> PWM_{CH,CL}
  33
  34 endchoice
  35
  36 choice
  37         prompt "PWM Sync Pin"
  38         default BF518_PWM_SYNC_PF7
  39         help
  40           Select the pin used for PWM_SYNC.
  41
  42           See the Hardware Reference Manual for more details.
  43
  44 config BF518_PWM_SYNC_PF7
  45         bool "PF7"
  46 config BF518_PWM_SYNC_PF15
  47         bool "PF15"
  48 endchoice
  49
  50 choice
  51         prompt "PWM Trip B Pin"
  52         default BF518_PWM_TRIPB_PG10
  53         help
  54           Select the pin used for PWM_TRIPB.
  55
  56           See the Hardware Reference Manual for more details.
  57
  58 config BF518_PWM_TRIPB_PG10
  59         bool "PG10"
  60 config BF518_PWM_TRIPB_PG14
  61         bool "PG14"
  62 endchoice
  63
  64 choice
  65         prompt "PPI / Timer Pins"
  66         default BF518_PPI_TMR_PG5
  67         help
  68           Select pins used for PPI/Timer:
  69             PPICLK PPIFS1 PPIFS2
  70             TMRCLK TMR0 TMR1
  71
  72           See the Hardware Reference Manual for more details.
  73
  74 config BF518_PPI_TMR_PG5
  75         bool "PG5 - PG7"
  76         help
  77           PG{5,6,7} <-> {PPICLK/TMRCLK,TMR0/PPIFS1,TMR1/PPIFS2}
  78
  79 config BF518_PPI_TMR_PG12
  80         bool "PG12 - PG14"
  81         help
  82           PG{12,13,14} <-> {PPICLK/TMRCLK,TMR0/PPIFS1,TMR1/PPIFS2}
  83
  84 endchoice
  85
  86 comment "Hysteresis/Schmitt Trigger Control"
  87 config BFIN_HYSTERESIS_CONTROL
  88         bool "Enable Hysteresis Control"
  89         help
  90           The ADSP-BF51x allows to control input hysteresis for Port F,
  91           Port G and Port H and other processor signal inputs.
  92           The Schmitt trigger enables can be set only for pin groups.
  93           Saying Y will overwrite the default reset or boot loader
  94           initialization.
  95
  96 menu "PORT F"
  97         depends on BFIN_HYSTERESIS_CONTROL
  98 config GPIO_HYST_PORTF_0_7
  99         bool "Enable Hysteresis on PORTF {0...7}"
 100 config GPIO_HYST_PORTF_8_9
 101         bool "Enable Hysteresis on PORTF {8, 9}"
 102 config GPIO_HYST_PORTF_10
 103         bool "Enable Hysteresis on PORTF 10"
 104 config GPIO_HYST_PORTF_11
 105         bool "Enable Hysteresis on PORTF 11"
 106 config GPIO_HYST_PORTF_12_13
 107         bool "Enable Hysteresis on PORTF {12, 13}"
 108 config GPIO_HYST_PORTF_14_15
 109         bool "Enable Hysteresis on PORTF {14, 15}"
 110 endmenu
 111
 112 menu "PORT G"
 113         depends on BFIN_HYSTERESIS_CONTROL
 114 config GPIO_HYST_PORTG_0
 115         bool "Enable Hysteresis on PORTG 0"
 116 config GPIO_HYST_PORTG_1_4
 117         bool "Enable Hysteresis on PORTG {1...4}"
 118 config GPIO_HYST_PORTG_5_6
 119         bool "Enable Hysteresis on PORTG {5, 6}"
 120 config GPIO_HYST_PORTG_7_8
 121         bool "Enable Hysteresis on PORTG {7, 8}"
 122 config GPIO_HYST_PORTG_9
 123         bool "Enable Hysteresis on PORTG 9"
 124 config GPIO_HYST_PORTG_10
 125         bool "Enable Hysteresis on PORTG 10"
 126 config GPIO_HYST_PORTG_11_13
 127         bool "Enable Hysteresis on PORTG {11...13}"
 128 config GPIO_HYST_PORTG_14_15
 129         bool "Enable Hysteresis on PORTG {14, 15}"
 130 endmenu
 131
 132 menu "PORT H"
 133         depends on BFIN_HYSTERESIS_CONTROL
 134 config GPIO_HYST_PORTH_0_7
 135         bool "Enable Hysteresis on PORTH {0...7}"
 136
 137 endmenu
 138
 139 menu "None-GPIO"
 140         depends on BFIN_HYSTERESIS_CONTROL
 141 config NONEGPIO_HYST_NMI_RST_BMODE
 142         bool "Enable Hysteresis on {NMI, RESET, BMODE}"
 143 config NONEGPIO_HYST_JTAG
 144         bool "Enable Hysteresis on JTAG"
 145 endmenu
 146
 147 comment "Interrupt Priority Assignment"
 148 menu "Priority"
 149
 150 config IRQ_PLL_WAKEUP
 151         int "IRQ_PLL_WAKEUP"
 152         default 7
 153 config IRQ_DMA0_ERROR
 154         int "IRQ_DMA0_ERROR"
 155         default 7
 156 config IRQ_DMAR0_BLK
 157         int "IRQ_DMAR0_BLK"
 158         default 7
 159 config IRQ_DMAR1_BLK
 160         int "IRQ_DMAR1_BLK"
 161         default 7
 162 config IRQ_DMAR0_OVR
 163         int "IRQ_DMAR0_OVR"
 164         default 7
 165 config IRQ_DMAR1_OVR
 166         int "IRQ_DMAR1_OVR"
 167         default 7
 168 config IRQ_PPI_ERROR
 169         int "IRQ_PPI_ERROR"
 170         default 7
 171 config IRQ_MAC_ERROR
 172         int "IRQ_MAC_ERROR"
 173         default 7
 174 config IRQ_SPORT0_ERROR
 175         int "IRQ_SPORT0_ERROR"
 176         default 7
 177 config IRQ_SPORT1_ERROR
 178         int "IRQ_SPORT1_ERROR"
 179         default 7
 180 config IRQ_PTP_ERROR
 181         int "IRQ_PTP_ERROR"
 182         default 7
 183 config IRQ_UART0_ERROR
 184         int "IRQ_UART0_ERROR"
 185         default 7
 186 config IRQ_UART1_ERROR
 187         int "IRQ_UART1_ERROR"
 188         default 7
 189 config IRQ_RTC
 190         int "IRQ_RTC"
 191         default 8
 192 config IRQ_PPI
 193         int "IRQ_PPI"
 194         default 8
 195 config IRQ_SPORT0_RX
 196         int "IRQ_SPORT0_RX"
 197         default 9
 198 config IRQ_SPORT0_TX
 199         int "IRQ_SPORT0_TX"
 200         default 9
 201 config IRQ_SPORT1_RX
 202         int "IRQ_SPORT1_RX"
 203         default 9
 204 config IRQ_SPORT1_TX
 205         int "IRQ_SPORT1_TX"
 206         default 9
 207 config IRQ_TWI
 208         int "IRQ_TWI"
 209         default 10
 210 config IRQ_SPI0
 211         int "IRQ_SPI"
 212         default 10
 213 config IRQ_UART0_RX
 214         int "IRQ_UART0_RX"
 215         default 10
 216 config IRQ_UART0_TX
 217         int "IRQ_UART0_TX"
 218         default 10
 219 config IRQ_UART1_RX
 220         int "IRQ_UART1_RX"
 221         default 10
 222 config IRQ_UART1_TX
 223         int "IRQ_UART1_TX"
 224         default 10
 225 config IRQ_OPTSEC
 226         int "IRQ_OPTSEC"
 227         default 11
 228 config IRQ_CNT
 229         int "IRQ_CNT"
 230         default 11
 231 config IRQ_MAC_RX
 232         int "IRQ_MAC_RX"
 233         default 11
 234 config IRQ_PORTH_INTA
 235         int "IRQ_PORTH_INTA"
 236         default 11
 237 config IRQ_MAC_TX
 238         int "IRQ_MAC_TX/NFC"
 239         default 11
 240 config IRQ_PORTH_INTB
 241         int "IRQ_PORTH_INTB"
 242         default 11
 243 config IRQ_TIMER0
 244         int "IRQ_TIMER0"
 245         default 7 if TICKSOURCE_GPTMR0
 246         default 8
 247 config IRQ_TIMER1
 248         int "IRQ_TIMER1"
 249         default 12
 250 config IRQ_TIMER2
 251         int "IRQ_TIMER2"
 252         default 12
 253 config IRQ_TIMER3
 254         int "IRQ_TIMER3"
 255         default 12
 256 config IRQ_TIMER4
 257         int "IRQ_TIMER4"
 258         default 12
 259 config IRQ_TIMER5
 260         int "IRQ_TIMER5"
 261         default 12
 262 config IRQ_TIMER6
 263         int "IRQ_TIMER6"
 264         default 12
 265 config IRQ_TIMER7
 266         int "IRQ_TIMER7"
 267         default 12
 268 config IRQ_PORTG_INTA
 269         int "IRQ_PORTG_INTA"
 270         default 12
 271 config IRQ_PORTG_INTB
 272         int "IRQ_PORTG_INTB"
 273         default 12
 274 config IRQ_MEM_DMA0
 275         int "IRQ_MEM_DMA0"
 276         default 13
 277 config IRQ_MEM_DMA1
 278         int "IRQ_MEM_DMA1"
 279         default 13
 280 config IRQ_WATCH
 281         int "IRQ_WATCH"
 282         default 13
 283 config IRQ_PORTF_INTA
 284         int "IRQ_PORTF_INTA"
 285         default 13
 286 config IRQ_PORTF_INTB
 287         int "IRQ_PORTF_INTB"
 288         default 13
 289 config IRQ_SPI0_ERROR
 290         int "IRQ_SPI0_ERROR"
 291         default 7
 292 config IRQ_SPI1_ERROR
 293         int "IRQ_SPI1_ERROR"
 294         default 7
 295 config IRQ_RSI_INT0
 296         int "IRQ_RSI_INT0"
 297         default 7
 298 config IRQ_RSI_INT1
 299         int "IRQ_RSI_INT1"
 300         default 7
 301 config IRQ_PWM_TRIP
 302         int "IRQ_PWM_TRIP"
 303         default 10
 304 config IRQ_PWM_SYNC
 305         int "IRQ_PWM_SYNC"
 306         default 10
 307 config IRQ_PTP_STAT
 308         int "IRQ_PTP_STAT"
 309         default 10
 310
 311         help
 312           Enter the priority numbers between 7-13 ONLY.  Others are Reserved.
 313           This applies to all the above.  It is not recommended to assign the
 314           highest priority number 7 to UART or any other device.
 315
 316 endmenu
 317
 318 endmenu
 319
 320 endif