arch/m68k/Kconfig.devices

   1 # SPDX-License-Identifier: GPL-2.0
   2 if MMU
   3
   4 config ARCH_MAY_HAVE_PC_FDC
   5         bool
   6         depends on BROKEN && (Q40 || SUN3X)
   7         default y
   8
   9 menu "Platform devices"
  10
  11 config HEARTBEAT
  12         bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || Q40
  13         default y if !AMIGA && !APOLLO && !ATARI && !Q40 && HP300
  14         help
  15           Use the power-on LED on your machine as a load meter.  The exact
  16           behavior is platform-dependent, but normally the flash frequency is
  17           a hyperbolic function of the 5-minute load average.
  18
  19 # We have a dedicated heartbeat LED. :-)
  20 config PROC_HARDWARE
  21         bool "/proc/hardware support"
  22         help
  23           Say Y here to support the /proc/hardware file, which gives you
  24           access to information about the machine you're running on,
  25           including the model, CPU, MMU, clock speed, BogoMIPS rating,
  26           and memory size.
  27
  28 config NATFEAT
  29         bool "ARAnyM emulator support"
  30         depends on ATARI
  31         help
  32           This option enables support for ARAnyM native features, such as
  33           access to a disk image as /dev/hda.
  34
  35 config NFBLOCK
  36         tristate "NatFeat block device support"
  37         depends on BLOCK && NATFEAT
  38         help
  39           Say Y to include support for the ARAnyM NatFeat block device
  40           which allows direct access to the hard drives without using
  41           the hardware emulation.
  42
  43 config NFCON
  44         tristate "NatFeat console driver"
  45         depends on TTY && NATFEAT
  46         help
  47           Say Y to include support for the ARAnyM NatFeat console driver
  48           which allows the console output to be redirected to the stderr
  49           output of ARAnyM.
  50
  51 config NFETH
  52         tristate "NatFeat Ethernet support"
  53         depends on ETHERNET && NATFEAT
  54         help
  55           Say Y to include support for the ARAnyM NatFeat network device
  56           which will emulate a regular ethernet device while presenting an
  57           ethertap device to the host system.
  58
  59 config ATARI_ETHERNAT
  60         bool "Atari EtherNAT Ethernet support"
  61         depends on ATARI
  62         ---help---
  63           Say Y to include support for the EtherNAT network adapter for the
  64           CT/60 extension port.
  65
  66           To compile the actual ethernet driver, choose Y or M for the SMC91X
  67           option in the network device section; the module will be called smc91x.
  68
  69 config ATARI_ETHERNEC
  70         bool "Atari EtherNEC Ethernet support"
  71         depends on ATARI_ROM_ISA
  72         ---help---
  73           Say Y to include support for the EtherNEC network adapter for the
  74           ROM port. The driver works by polling instead of interrupts, so it
  75           is quite slow.
  76
  77           This driver also supports the ethernet part of the NetUSBee ROM
  78           port combined Ethernet/USB adapter.
  79
  80           To compile the actual ethernet driver, choose Y or M in for the NE2000
  81           option in the network device section; the module will be called ne.
  82
  83 endmenu
  84
  85 menu "Character devices"
  86
  87 config ATARI_DSP56K
  88         tristate "Atari DSP56k support"
  89         depends on ATARI
  90         help
  91           If you want to be able to use the DSP56001 in Falcons, say Y. This
  92           driver is still experimental, and if you don't know what it is, or
  93           if you don't have this processor, just say N.
  94
  95           To compile this driver as a module, choose M here.
  96
  97 config AMIGA_BUILTIN_SERIAL
  98         tristate "Amiga builtin serial support"
  99         depends on AMIGA && TTY
 100         help
 101           If you want to use your Amiga's built-in serial port in Linux,
 102           answer Y.
 103
 104           To compile this driver as a module, choose M here.
 105
 106 config HPDCA
 107         tristate "HP DCA serial support"
 108         depends on DIO && SERIAL_8250
 109         help
 110           If you want to use the internal "DCA" serial ports on an HP300
 111           machine, say Y here.
 112
 113 config HPAPCI
 114         tristate "HP APCI serial support"
 115         depends on HP300 && SERIAL_8250
 116         help
 117           If you want to use the internal "APCI" serial ports on an HP400
 118           machine, say Y here.
 119
 120 config SERIAL_CONSOLE
 121         bool "Support for serial port console"
 122         depends on AMIGA_BUILTIN_SERIAL=y
 123         ---help---
 124           If you say Y here, it will be possible to use a serial port as the
 125           system console (the system console is the device which receives all
 126           kernel messages and warnings and which allows logins in single user
 127           mode). This could be useful if some terminal or printer is connected
 128           to that serial port.
 129
 130           Even if you say Y here, the currently visible virtual console
 131           (/dev/tty0) will still be used as the system console by default, but
 132           you can alter that using a kernel command line option such as
 133           "console=ttyS1". (Try "man bootparam" or see the documentation of
 134           your boot loader about how to pass options to the kernel at boot
 135           time.)
 136
 137           If you don't have a graphical console and you say Y here, the
 138           kernel will automatically use the first serial line, /dev/ttyS0, as
 139           system console.
 140
 141           If unsure, say N.
 142
 143 endmenu
 144
 145 endif