]>
git.ipfire.org Git - people/ms/u-boot.git/blob - arch/powerpc/cpu/74xx_7xx/cpu.c
3 * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
5 * See file CREDITS for list of people who contributed to this
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
29 * written or collected and sometimes rewritten by
30 * Magnus Damm <damm@bitsmart.com>
32 * minor modifications by
33 * Wolfgang Denk <wd@denx.de>
35 * more modifications by
36 * Josh Huber <huber@mclx.com>
37 * added support for the 74xx series of cpus
38 * added support for the 7xx series of cpus
39 * made the code a little less hard-coded, and more auto-detectish
45 #include <asm/cache.h>
47 #if defined(CONFIG_OF_LIBFDT)
49 #include <fdt_support.h>
52 #ifdef CONFIG_AMIGAONEG3SE
53 #include "../board/MAI/AmigaOneG3SE/via686.h"
54 #include "../board/MAI/AmigaOneG3SE/memio.h"
57 DECLARE_GLOBAL_DATA_PTR
;
67 switch (PVR_VER(pvr
)) {
74 if (((pvr
>> 8) & 0xff) == 0x01) {
75 type
= CPU_750CX
; /* old CX (80100 and 8010x?)*/
76 } else if (((pvr
>> 8) & 0xff) == 0x22) {
77 type
= CPU_750CX
; /* CX (82201,82202) and CXe (82214) */
78 } else if (((pvr
>> 8) & 0xff) == 0x33) {
79 type
= CPU_750CX
; /* CXe (83311) */
80 } else if (((pvr
>> 12) & 0xF) == 0x3) {
124 /* ------------------------------------------------------------------------- */
126 #if !defined(CONFIG_BAB7xx)
129 uint type
= get_cpu_type();
130 uint pvr
= get_pvr();
131 ulong clock
= gd
->cpu_clk
;
139 printf ("750CX%s v%d.%d", (pvr
&0xf0)?"e":"",
189 printf("Unknown CPU -- PVR: 0x%08x\n", pvr
);
193 printf ("%s v%d.%d", str
, (pvr
>> 8) & 0xFF, pvr
& 0xFF);
195 printf (" @ %s MHz\n", strmhz(buf
, clock
));
200 /* these two functions are unimplemented currently [josh] */
202 /* -------------------------------------------------------------------- */
211 /* -------------------------------------------------------------------- */
220 /* -------------------------------------------------------------------- */
223 soft_restart(unsigned long addr
)
225 /* SRR0 has system reset vector, SRR1 has default MSR value */
226 /* rfi restores MSR from SRR1 and sets the PC to the SRR0 value */
228 __asm__
__volatile__ ("mtspr 26, %0" :: "r" (addr
));
229 __asm__
__volatile__ ("li 4, (1 << 6)" ::: "r4");
230 __asm__
__volatile__ ("mtspr 27, 4");
231 __asm__
__volatile__ ("rfi");
233 while(1); /* not reached */
237 #if !defined(CONFIG_PCIPPC2) && \
238 !defined(CONFIG_BAB7xx) && \
239 !defined(CONFIG_ELPPC) && \
240 !defined(CONFIG_PPMC7XX)
241 /* no generic way to do board reset. simply call soft_reset. */
243 do_reset (cmd_tbl_t
*cmdtp
, int flag
, int argc
, char *argv
[])
246 /* flush and disable I/D cache */
247 __asm__
__volatile__ ("mfspr 3, 1008" ::: "r3");
248 __asm__
__volatile__ ("ori 5, 5, 0xcc00" ::: "r5");
249 __asm__
__volatile__ ("ori 4, 3, 0xc00" ::: "r4");
250 __asm__
__volatile__ ("andc 5, 3, 5" ::: "r5");
251 __asm__
__volatile__ ("sync");
252 __asm__
__volatile__ ("mtspr 1008, 4");
253 __asm__
__volatile__ ("isync");
254 __asm__
__volatile__ ("sync");
255 __asm__
__volatile__ ("mtspr 1008, 5");
256 __asm__
__volatile__ ("isync");
257 __asm__
__volatile__ ("sync");
259 #ifdef CONFIG_SYS_RESET_ADDRESS
260 addr
= CONFIG_SYS_RESET_ADDRESS
;
263 * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address,
264 * CONFIG_SYS_MONITOR_BASE - sizeof (ulong) is usually a valid
265 * address. Better pick an address known to be invalid on your
266 * system and assign it to CONFIG_SYS_RESET_ADDRESS.
268 addr
= CONFIG_SYS_MONITOR_BASE
- sizeof (ulong
);
271 while(1); /* not reached */
275 /* ------------------------------------------------------------------------- */
278 * For the 7400 the TB clock runs at 1/4 the cpu bus speed.
280 #if defined(CONFIG_AMIGAONEG3SE) || defined(CONFIG_SYS_CONFIG_BUS_CLK)
281 unsigned long get_tbclk(void)
283 return (gd
->bus_clk
/ 4);
285 #else /* ! CONFIG_AMIGAONEG3SE and !CONFIG_SYS_CONFIG_BUS_CLK*/
287 unsigned long get_tbclk (void)
289 return CONFIG_SYS_BUS_HZ
/ 4;
291 #endif /* CONFIG_AMIGAONEG3SE or CONFIG_SYS_CONFIG_BUS_CLK*/
292 /* ------------------------------------------------------------------------- */
293 #if defined(CONFIG_WATCHDOG)
294 #if !defined(CONFIG_PCIPPC2) && !defined(CONFIG_BAB7xx)
300 #endif /* !CONFIG_PCIPPC2 && !CONFIG_BAB7xx */
301 #endif /* CONFIG_WATCHDOG */
303 /* ------------------------------------------------------------------------- */
305 #ifdef CONFIG_OF_LIBFDT
306 void ft_cpu_setup(void *blob
, bd_t
*bd
)
308 do_fixup_by_prop_u32(blob
, "device_type", "cpu", 4,
309 "timebase-frequency", bd
->bi_busfreq
/ 4, 1);
310 do_fixup_by_prop_u32(blob
, "device_type", "cpu", 4,
311 "bus-frequency", bd
->bi_busfreq
, 1);
312 do_fixup_by_prop_u32(blob
, "device_type", "cpu", 4,
313 "clock-frequency", bd
->bi_intfreq
, 1);
315 fdt_fixup_memory(blob
, (u64
)bd
->bi_memstart
, (u64
)bd
->bi_memsize
);
317 fdt_fixup_ethernet(blob
);
320 /* ------------------------------------------------------------------------- */