net: e1000: Add initialized eth_device & e1000_hw structure

[people/ms/u-boot.git] / arch / powerpc / cpu / mpc83xx / start.S

/*
 * Copyright (C) 1998  Dan Malek <dmalek@jlc.net>
 * Copyright (C) 1999  Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
 * Copyright (C) 2000, 2001,2002 Wolfgang Denk <wd@denx.de>
 * Copyright Freescale Semiconductor, Inc. 2004, 2006, 2008.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 *  U-Boot - Startup Code for MPC83xx PowerPC based Embedded Boards
 */

#include <asm-offsets.h>
#include <config.h>
#include <mpc83xx.h>
#include <timestamp.h>
#include <version.h>

#define CONFIG_83XX     1               /* needed for Linux kernel header files*/
#define _LINUX_CONFIG_H 1       /* avoid reading Linux autoconf.h file */

#include <ppc_asm.tmpl>
#include <ppc_defs.h>

#include <asm/cache.h>
#include <asm/mmu.h>
#include <asm/u-boot.h>

#ifndef  CONFIG_IDENT_STRING
#define  CONFIG_IDENT_STRING "MPC83XX"
#endif

/* We don't want the  MMU yet.
 */
#undef  MSR_KERNEL

/*
 * Floating Point enable, Machine Check and Recoverable Interr.
 */
#ifdef DEBUG
#define MSR_KERNEL (MSR_FP|MSR_RI)
#else
#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
#endif

#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SYS_RAMBOOT)
#define CONFIG_SYS_FLASHBOOT
#endif

/*
 * Set up GOT: Global Offset Table
 *
 * Use r12 to access the GOT
 */
        START_GOT
        GOT_ENTRY(_GOT2_TABLE_)
        GOT_ENTRY(__bss_start)
        GOT_ENTRY(_end)

#ifndef CONFIG_NAND_SPL
        GOT_ENTRY(_FIXUP_TABLE_)
        GOT_ENTRY(_start)
        GOT_ENTRY(_start_of_vectors)
        GOT_ENTRY(_end_of_vectors)
        GOT_ENTRY(transfer_to_handler)
#endif
        END_GOT

/*
 * The Hard Reset Configuration Word (HRCW) table is in the first 64
 * (0x40) bytes of flash.  It has 8 bytes, but each byte is repeated 8
 * times so the processor can fetch it out of flash whether the flash
 * is 8, 16, 32, or 64 bits wide (hardware trickery).
 */
        .text
#define _HRCW_TABLE_ENTRY(w)            \
        .fill   8,1,(((w)>>24)&0xff);   \
        .fill   8,1,(((w)>>16)&0xff);   \
        .fill   8,1,(((w)>> 8)&0xff);   \
        .fill   8,1,(((w)    )&0xff)

        _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_LOW)
        _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_HIGH)

/*
 * Magic number and version string - put it after the HRCW since it
 * cannot be first in flash like it is in many other processors.
 */
        .long   0x27051956              /* U-Boot Magic Number */

        .globl  version_string
version_string:
        .ascii U_BOOT_VERSION
        .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
        .ascii " ", CONFIG_IDENT_STRING, "\0"

        .align 2

        .globl enable_addr_trans
enable_addr_trans:
        /* enable address translation */
        mfmsr   r5
        ori     r5, r5, (MSR_IR | MSR_DR)
        mtmsr   r5
        isync
        blr

        .globl disable_addr_trans
disable_addr_trans:
        /* disable address translation */
        mflr    r4
        mfmsr   r3
        andi.   r0, r3, (MSR_IR | MSR_DR)
        beqlr
        andc    r3, r3, r0
        mtspr   SRR0, r4
        mtspr   SRR1, r3
        rfi

        .globl get_pvr
get_pvr:
        mfspr   r3, PVR
        blr

        .globl  ppcDWstore
ppcDWstore:
        lfd     1, 0(r4)
        stfd    1, 0(r3)
        blr

        .globl  ppcDWload
ppcDWload:
        lfd     1, 0(r3)
        stfd    1, 0(r4)
        blr

#ifndef CONFIG_DEFAULT_IMMR
#error CONFIG_DEFAULT_IMMR must be defined
#endif /* CONFIG_SYS_DEFAULT_IMMR */
#ifndef CONFIG_SYS_IMMR
#define CONFIG_SYS_IMMR CONFIG_DEFAULT_IMMR
#endif /* CONFIG_SYS_IMMR */

/*
 * After configuration, a system reset exception is executed using the
 * vector at offset 0x100 relative to the base set by MSR[IP]. If
 * MSR[IP] is 0, the base address is 0x00000000. If MSR[IP] is 1, the
 * base address is 0xfff00000. In the case of a Power On Reset or Hard
 * Reset, the value of MSR[IP] is determined by the CIP field in the
 * HRCW.
 *
 * Other bits in the HRCW set up the Base Address and Port Size in BR0.
 * This determines the location of the boot ROM (flash or EPROM) in the
 * processor's address space at boot time. As long as the HRCW is set up
 * so that we eventually end up executing the code below when the
 * processor executes the reset exception, the actual values used should
 * not matter.
 *
 * Once we have got here, the address mask in OR0 is cleared so that the
 * bottom 32K of the boot ROM is effectively repeated all throughout the
 * processor's address space, after which we can jump to the absolute
 * address at which the boot ROM was linked at compile time, and proceed
 * to initialise the memory controller without worrying if the rug will
 * be pulled out from under us, so to speak (it will be fine as long as
 * we configure BR0 with the same boot ROM link address).
 */
        . = EXC_OFF_SYS_RESET

        .globl  _start
_start: /* time t 0 */
        lis     r4, CONFIG_DEFAULT_IMMR@h
        nop

        mfmsr   r5                      /* save msr contents    */

        /* 83xx manuals prescribe a specific sequence for updating IMMRBAR. */
        bl      1f
1:      mflr    r7

        lis     r3, CONFIG_SYS_IMMR@h
        ori     r3, r3, CONFIG_SYS_IMMR@l

        lwz     r6, IMMRBAR(r4)
        isync

        stw     r3, IMMRBAR(r4)
        lwz     r6, 0(r7)               /* Arbitrary external load */
        isync

        lwz     r6, IMMRBAR(r3)
        isync

        /* Initialise the E300 processor core           */
        /*------------------------------------------*/

#ifdef CONFIG_NAND_SPL
        /* The FCM begins execution after only the first page
         * is loaded.  Wait for the rest before branching
         * to another flash page.
         */
1:      lwz     r6, 0x50b0(r3)
        andi.   r6, r6, 1
        beq     1b
#endif

        bl      init_e300_core

#ifdef CONFIG_SYS_FLASHBOOT

        /* Inflate flash location so it appears everywhere, calculate */
        /* the absolute address in final location of the FLASH, jump  */
        /* there and deflate the flash size back to minimal size      */
        /*------------------------------------------------------------*/
        bl map_flash_by_law1
        lis r4, (CONFIG_SYS_MONITOR_BASE)@h
        ori r4, r4, (CONFIG_SYS_MONITOR_BASE)@l
        addi r5, r4, in_flash - _start + EXC_OFF_SYS_RESET
        mtlr r5
        blr
in_flash:
#if 1 /* Remapping flash with LAW0. */
        bl remap_flash_by_law0
#endif
#endif  /* CONFIG_SYS_FLASHBOOT */

        /* setup the bats */
        bl      setup_bats
        sync

        /*
         * Cache must be enabled here for stack-in-cache trick.
         * This means we need to enable the BATS.
         * This means:
         *   1) for the EVB, original gt regs need to be mapped
         *   2) need to have an IBAT for the 0xf region,
         *      we are running there!
         * Cache should be turned on after BATs, since by default
         * everything is write-through.
         * The init-mem BAT can be reused after reloc. The old
         * gt-regs BAT can be reused after board_init_f calls
         * board_early_init_f (EVB only).
         */
        /* enable address translation */
        bl      enable_addr_trans
        sync

        /* enable the data cache */
        bl      dcache_enable
        sync
#ifdef CONFIG_SYS_INIT_RAM_LOCK
        bl      lock_ram_in_cache
        sync
#endif

        /* set up the stack pointer in our newly created
         * cache-ram (r1) */
        lis     r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h
        ori     r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l

        li      r0, 0           /* Make room for stack frame header and */
        stwu    r0, -4(r1)      /* clear final stack frame so that      */
        stwu    r0, -4(r1)      /* stack backtraces terminate cleanly   */


        /* let the C-code set up the rest                           */
        /*                                                          */
        /* Be careful to keep code relocatable & stack humble   */
        /*------------------------------------------------------*/

        GET_GOT                 /* initialize GOT access        */

        /* r3: IMMR */
        lis     r3, CONFIG_SYS_IMMR@h
        /* run low-level CPU init code (in Flash)*/
        bl      cpu_init_f

        /* run 1st part of board init code (in Flash)*/
        bl      board_init_f

        /* NOTREACHED - board_init_f() does not return */

#ifndef CONFIG_NAND_SPL
/*
 * Vector Table
 */

        .globl  _start_of_vectors
_start_of_vectors:

/* Machine check */
        STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)

/* Data Storage exception. */
        STD_EXCEPTION(0x300, DataStorage, UnknownException)

/* Instruction Storage exception. */
        STD_EXCEPTION(0x400, InstStorage, UnknownException)

/* External Interrupt exception. */
#ifndef FIXME
        STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
#endif

/* Alignment exception. */
        . = 0x600
Alignment:
        EXCEPTION_PROLOG(SRR0, SRR1)
        mfspr   r4,DAR
        stw     r4,_DAR(r21)
        mfspr   r5,DSISR
        stw     r5,_DSISR(r21)
        addi    r3,r1,STACK_FRAME_OVERHEAD
        EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)

/* Program check exception */
        . = 0x700
ProgramCheck:
        EXCEPTION_PROLOG(SRR0, SRR1)
        addi    r3,r1,STACK_FRAME_OVERHEAD
        EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
                MSR_KERNEL, COPY_EE)

        STD_EXCEPTION(0x800, FPUnavailable, UnknownException)

        /* I guess we could implement decrementer, and may have
         * to someday for timekeeping.
         */
        STD_EXCEPTION(0x900, Decrementer, timer_interrupt)

        STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
        STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
        STD_EXCEPTION(0xc00, SystemCall, UnknownException)
        STD_EXCEPTION(0xd00, SingleStep, UnknownException)

        STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
        STD_EXCEPTION(0xf00, Trap_0f, UnknownException)

        STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException)
        STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException)
        STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException)
#ifdef DEBUG
        . = 0x1300
        /*
         * This exception occurs when the program counter matches the
         * Instruction Address Breakpoint Register (IABR).
         *
         * I want the cpu to halt if this occurs so I can hunt around
         * with the debugger and look at things.
         *
         * When DEBUG is defined, both machine check enable (in the MSR)
         * and checkstop reset enable (in the reset mode register) are
         * turned off and so a checkstop condition will result in the cpu
         * halting.
         *
         * I force the cpu into a checkstop condition by putting an illegal
         * instruction here (at least this is the theory).
         *
         * well - that didnt work, so just do an infinite loop!
         */
1:      b       1b
#else
        STD_EXCEPTION(0x1300, InstructionBreakpoint, DebugException)
#endif
        STD_EXCEPTION(0x1400, SMI, UnknownException)

        STD_EXCEPTION(0x1500, Trap_15, UnknownException)
        STD_EXCEPTION(0x1600, Trap_16, UnknownException)
        STD_EXCEPTION(0x1700, Trap_17, UnknownException)
        STD_EXCEPTION(0x1800, Trap_18, UnknownException)
        STD_EXCEPTION(0x1900, Trap_19, UnknownException)
        STD_EXCEPTION(0x1a00, Trap_1a, UnknownException)
        STD_EXCEPTION(0x1b00, Trap_1b, UnknownException)
        STD_EXCEPTION(0x1c00, Trap_1c, UnknownException)
        STD_EXCEPTION(0x1d00, Trap_1d, UnknownException)
        STD_EXCEPTION(0x1e00, Trap_1e, UnknownException)
        STD_EXCEPTION(0x1f00, Trap_1f, UnknownException)
        STD_EXCEPTION(0x2000, Trap_20, UnknownException)
        STD_EXCEPTION(0x2100, Trap_21, UnknownException)
        STD_EXCEPTION(0x2200, Trap_22, UnknownException)
        STD_EXCEPTION(0x2300, Trap_23, UnknownException)
        STD_EXCEPTION(0x2400, Trap_24, UnknownException)
        STD_EXCEPTION(0x2500, Trap_25, UnknownException)
        STD_EXCEPTION(0x2600, Trap_26, UnknownException)
        STD_EXCEPTION(0x2700, Trap_27, UnknownException)
        STD_EXCEPTION(0x2800, Trap_28, UnknownException)
        STD_EXCEPTION(0x2900, Trap_29, UnknownException)
        STD_EXCEPTION(0x2a00, Trap_2a, UnknownException)
        STD_EXCEPTION(0x2b00, Trap_2b, UnknownException)
        STD_EXCEPTION(0x2c00, Trap_2c, UnknownException)
        STD_EXCEPTION(0x2d00, Trap_2d, UnknownException)
        STD_EXCEPTION(0x2e00, Trap_2e, UnknownException)
        STD_EXCEPTION(0x2f00, Trap_2f, UnknownException)


        .globl  _end_of_vectors
_end_of_vectors:

        . = 0x3000

/*
 * This code finishes saving the registers to the exception frame
 * and jumps to the appropriate handler for the exception.
 * Register r21 is pointer into trap frame, r1 has new stack pointer.
 */
        .globl  transfer_to_handler
transfer_to_handler:
        stw     r22,_NIP(r21)
        lis     r22,MSR_POW@h
        andc    r23,r23,r22
        stw     r23,_MSR(r21)
        SAVE_GPR(7, r21)
        SAVE_4GPRS(8, r21)
        SAVE_8GPRS(12, r21)
        SAVE_8GPRS(24, r21)
        mflr    r23
        andi.   r24,r23,0x3f00          /* get vector offset */
        stw     r24,TRAP(r21)
        li      r22,0
        stw     r22,RESULT(r21)
        lwz     r24,0(r23)              /* virtual address of handler */
        lwz     r23,4(r23)              /* where to go when done */
        mtspr   SRR0,r24
        mtspr   SRR1,r20
        mtlr    r23
        SYNC
        rfi                             /* jump to handler, enable MMU */

int_return:
        mfmsr   r28             /* Disable interrupts */
        li      r4,0
        ori     r4,r4,MSR_EE
        andc    r28,r28,r4
        SYNC                    /* Some chip revs need this... */
        mtmsr   r28
        SYNC
        lwz     r2,_CTR(r1)
        lwz     r0,_LINK(r1)
        mtctr   r2
        mtlr    r0
        lwz     r2,_XER(r1)
        lwz     r0,_CCR(r1)
        mtspr   XER,r2
        mtcrf   0xFF,r0
        REST_10GPRS(3, r1)
        REST_10GPRS(13, r1)
        REST_8GPRS(23, r1)
        REST_GPR(31, r1)
        lwz     r2,_NIP(r1)     /* Restore environment */
        lwz     r0,_MSR(r1)
        mtspr   SRR0,r2
        mtspr   SRR1,r0
        lwz     r0,GPR0(r1)
        lwz     r2,GPR2(r1)
        lwz     r1,GPR1(r1)
        SYNC
        rfi
#endif /* !CONFIG_NAND_SPL */

/*
 * This code initialises the E300 processor core
 * (conforms to PowerPC 603e spec)
 * Note: expects original MSR contents to be in r5.
 */
        .globl  init_e300_core
init_e300_core: /* time t 10 */
        /* Initialize machine status; enable machine check interrupt */
        /*-----------------------------------------------------------*/

        li      r3, MSR_KERNEL                  /* Set ME and RI flags */
        rlwimi  r3, r5, 0, 25, 25       /* preserve IP bit set by HRCW */
#ifdef DEBUG
        rlwimi  r3, r5, 0, 21, 22   /* debugger might set SE & BE bits */
#endif
        SYNC                                            /* Some chip revs need this... */
        mtmsr   r3
        SYNC
        mtspr   SRR1, r3                        /* Make SRR1 match MSR */


        lis     r3, CONFIG_SYS_IMMR@h
#if defined(CONFIG_WATCHDOG)
        /* Initialise the Watchdog values and reset it (if req) */
        /*------------------------------------------------------*/
        lis r4, CONFIG_SYS_WATCHDOG_VALUE
        ori r4, r4, (SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR)
        stw r4, SWCRR(r3)

        /* and reset it */

        li      r4, 0x556C
        sth     r4, SWSRR@l(r3)
        li      r4, -0x55C7
        sth     r4, SWSRR@l(r3)
#else
        /* Disable Watchdog  */
        /*-------------------*/
        lwz r4, SWCRR(r3)
        /* Check to see if its enabled for disabling
           once disabled by SW you can't re-enable */
        andi. r4, r4, 0x4
        beq 1f
        xor r4, r4, r4
        stw r4, SWCRR(r3)
1:
#endif /* CONFIG_WATCHDOG */

#if defined(CONFIG_MASK_AER_AO)
        /* Write the Arbiter Event Enable to mask Address Only traps. */
        /* This prevents the dcbz instruction from being trapped when */
        /* HID0_ABE Address Broadcast Enable is set and the MEMORY    */
        /* COHERENCY bit is set in the WIMG bits, which is often      */
        /* needed for PCI operation.                                  */
        lwz     r4, 0x0808(r3)
        rlwinm  r0, r4, 0, ~AER_AO
        stw     r0, 0x0808(r3)
#endif /* CONFIG_MASK_AER_AO */

        /* Initialize the Hardware Implementation-dependent Registers */
        /* HID0 also contains cache control                     */
        /* - force invalidation of data and instruction caches  */
        /*------------------------------------------------------*/

        lis     r3, CONFIG_SYS_HID0_INIT@h
        ori     r3, r3, (CONFIG_SYS_HID0_INIT | HID0_ICFI | HID0_DCFI)@l
        SYNC
        mtspr   HID0, r3

        lis     r3, CONFIG_SYS_HID0_FINAL@h
        ori     r3, r3, (CONFIG_SYS_HID0_FINAL & ~(HID0_ICFI | HID0_DCFI))@l
        SYNC
        mtspr   HID0, r3

        lis     r3, CONFIG_SYS_HID2@h
        ori     r3, r3, CONFIG_SYS_HID2@l
        SYNC
        mtspr   HID2, r3

        /* Done!                                                */
        /*------------------------------*/
        blr

        /* setup_bats - set them up to some initial state */
        .globl  setup_bats
setup_bats:
        addis   r0, r0, 0x0000

        /* IBAT 0 */
        addis   r4, r0, CONFIG_SYS_IBAT0L@h
        ori     r4, r4, CONFIG_SYS_IBAT0L@l
        addis   r3, r0, CONFIG_SYS_IBAT0U@h
        ori     r3, r3, CONFIG_SYS_IBAT0U@l
        mtspr   IBAT0L, r4
        mtspr   IBAT0U, r3

        /* DBAT 0 */
        addis   r4, r0, CONFIG_SYS_DBAT0L@h
        ori     r4, r4, CONFIG_SYS_DBAT0L@l
        addis   r3, r0, CONFIG_SYS_DBAT0U@h
        ori     r3, r3, CONFIG_SYS_DBAT0U@l
        mtspr   DBAT0L, r4
        mtspr   DBAT0U, r3

        /* IBAT 1 */
        addis   r4, r0, CONFIG_SYS_IBAT1L@h
        ori     r4, r4, CONFIG_SYS_IBAT1L@l
        addis   r3, r0, CONFIG_SYS_IBAT1U@h
        ori     r3, r3, CONFIG_SYS_IBAT1U@l
        mtspr   IBAT1L, r4
        mtspr   IBAT1U, r3

        /* DBAT 1 */
        addis   r4, r0, CONFIG_SYS_DBAT1L@h
        ori     r4, r4, CONFIG_SYS_DBAT1L@l
        addis   r3, r0, CONFIG_SYS_DBAT1U@h
        ori     r3, r3, CONFIG_SYS_DBAT1U@l
        mtspr   DBAT1L, r4
        mtspr   DBAT1U, r3

        /* IBAT 2 */
        addis   r4, r0, CONFIG_SYS_IBAT2L@h
        ori     r4, r4, CONFIG_SYS_IBAT2L@l
        addis   r3, r0, CONFIG_SYS_IBAT2U@h
        ori     r3, r3, CONFIG_SYS_IBAT2U@l
        mtspr   IBAT2L, r4
        mtspr   IBAT2U, r3

        /* DBAT 2 */
        addis   r4, r0, CONFIG_SYS_DBAT2L@h
        ori     r4, r4, CONFIG_SYS_DBAT2L@l
        addis   r3, r0, CONFIG_SYS_DBAT2U@h
        ori     r3, r3, CONFIG_SYS_DBAT2U@l
        mtspr   DBAT2L, r4
        mtspr   DBAT2U, r3

        /* IBAT 3 */
        addis   r4, r0, CONFIG_SYS_IBAT3L@h
        ori     r4, r4, CONFIG_SYS_IBAT3L@l
        addis   r3, r0, CONFIG_SYS_IBAT3U@h
        ori     r3, r3, CONFIG_SYS_IBAT3U@l
        mtspr   IBAT3L, r4
        mtspr   IBAT3U, r3

        /* DBAT 3 */
        addis   r4, r0, CONFIG_SYS_DBAT3L@h
        ori     r4, r4, CONFIG_SYS_DBAT3L@l
        addis   r3, r0, CONFIG_SYS_DBAT3U@h
        ori     r3, r3, CONFIG_SYS_DBAT3U@l
        mtspr   DBAT3L, r4
        mtspr   DBAT3U, r3

#ifdef CONFIG_HIGH_BATS
        /* IBAT 4 */
        addis   r4, r0, CONFIG_SYS_IBAT4L@h
        ori     r4, r4, CONFIG_SYS_IBAT4L@l
        addis   r3, r0, CONFIG_SYS_IBAT4U@h
        ori     r3, r3, CONFIG_SYS_IBAT4U@l
        mtspr   IBAT4L, r4
        mtspr   IBAT4U, r3

        /* DBAT 4 */
        addis   r4, r0, CONFIG_SYS_DBAT4L@h
        ori     r4, r4, CONFIG_SYS_DBAT4L@l
        addis   r3, r0, CONFIG_SYS_DBAT4U@h
        ori     r3, r3, CONFIG_SYS_DBAT4U@l
        mtspr   DBAT4L, r4
        mtspr   DBAT4U, r3

        /* IBAT 5 */
        addis   r4, r0, CONFIG_SYS_IBAT5L@h
        ori     r4, r4, CONFIG_SYS_IBAT5L@l
        addis   r3, r0, CONFIG_SYS_IBAT5U@h
        ori     r3, r3, CONFIG_SYS_IBAT5U@l
        mtspr   IBAT5L, r4
        mtspr   IBAT5U, r3

        /* DBAT 5 */
        addis   r4, r0, CONFIG_SYS_DBAT5L@h
        ori     r4, r4, CONFIG_SYS_DBAT5L@l
        addis   r3, r0, CONFIG_SYS_DBAT5U@h
        ori     r3, r3, CONFIG_SYS_DBAT5U@l
        mtspr   DBAT5L, r4
        mtspr   DBAT5U, r3

        /* IBAT 6 */
        addis   r4, r0, CONFIG_SYS_IBAT6L@h
        ori     r4, r4, CONFIG_SYS_IBAT6L@l
        addis   r3, r0, CONFIG_SYS_IBAT6U@h
        ori     r3, r3, CONFIG_SYS_IBAT6U@l
        mtspr   IBAT6L, r4
        mtspr   IBAT6U, r3

        /* DBAT 6 */
        addis   r4, r0, CONFIG_SYS_DBAT6L@h
        ori     r4, r4, CONFIG_SYS_DBAT6L@l
        addis   r3, r0, CONFIG_SYS_DBAT6U@h
        ori     r3, r3, CONFIG_SYS_DBAT6U@l
        mtspr   DBAT6L, r4
        mtspr   DBAT6U, r3

        /* IBAT 7 */
        addis   r4, r0, CONFIG_SYS_IBAT7L@h
        ori     r4, r4, CONFIG_SYS_IBAT7L@l
        addis   r3, r0, CONFIG_SYS_IBAT7U@h
        ori     r3, r3, CONFIG_SYS_IBAT7U@l
        mtspr   IBAT7L, r4
        mtspr   IBAT7U, r3

        /* DBAT 7 */
        addis   r4, r0, CONFIG_SYS_DBAT7L@h
        ori     r4, r4, CONFIG_SYS_DBAT7L@l
        addis   r3, r0, CONFIG_SYS_DBAT7U@h
        ori     r3, r3, CONFIG_SYS_DBAT7U@l
        mtspr   DBAT7L, r4
        mtspr   DBAT7U, r3
#endif

        isync

        /* invalidate all tlb's
         *
         * From the 603e User Manual: "The 603e provides the ability to
         * invalidate a TLB entry. The TLB Invalidate Entry (tlbie)
         * instruction invalidates the TLB entry indexed by the EA, and
         * operates on both the instruction and data TLBs simultaneously
         * invalidating four TLB entries (both sets in each TLB). The
         * index corresponds to bits 15-19 of the EA. To invalidate all
         * entries within both TLBs, 32 tlbie instructions should be
         * issued, incrementing this field by one each time."
         *
         * "Note that the tlbia instruction is not implemented on the
         * 603e."
         *
         * bits 15-19 correspond to addresses 0x00000000 to 0x0001F000
         * incrementing by 0x1000 each time. The code below is sort of
         * based on code in "flush_tlbs" from arch/powerpc/kernel/head.S
         *
         */
        lis     r3, 0
        lis     r5, 2

1:
        tlbie   r3
        addi    r3, r3, 0x1000
        cmp     0, 0, r3, r5
        blt     1b

        blr

/* Cache functions.
 *
 * Note: requires that all cache bits in
 * HID0 are in the low half word.
 */
#ifndef CONFIG_NAND_SPL
        .globl  icache_enable
icache_enable:
        mfspr   r3, HID0
        ori     r3, r3, HID0_ICE
        li      r4, HID0_ICFI|HID0_ILOCK
        andc    r3, r3, r4
        ori     r4, r3, HID0_ICFI
        isync
        mtspr   HID0, r4    /* sets enable and invalidate, clears lock */
        isync
        mtspr   HID0, r3        /* clears invalidate */
        blr

        .globl  icache_disable
icache_disable:
        mfspr   r3, HID0
        lis     r4, 0
        ori     r4, r4, HID0_ICE|HID0_ICFI|HID0_ILOCK
        andc    r3, r3, r4
        isync
        mtspr   HID0, r3        /* clears invalidate, enable and lock */
        blr

        .globl  icache_status
icache_status:
        mfspr   r3, HID0
        rlwinm  r3, r3, (31 - HID0_ICE_SHIFT + 1), 31, 31
        blr
#endif  /* !CONFIG_NAND_SPL */

        .globl  dcache_enable
dcache_enable:
        mfspr   r3, HID0
        li      r5, HID0_DCFI|HID0_DLOCK
        andc    r3, r3, r5
        ori     r3, r3, HID0_DCE
        sync
        mtspr   HID0, r3                /* enable, no invalidate */
        blr

        .globl  dcache_disable
dcache_disable:
        mflr    r4
        bl      flush_dcache            /* uses r3 and r5 */
        mfspr   r3, HID0
        li      r5, HID0_DCE|HID0_DLOCK
        andc    r3, r3, r5
        ori     r5, r3, HID0_DCFI
        sync
        mtspr   HID0, r5        /* sets invalidate, clears enable and lock */
        sync
        mtspr   HID0, r3        /* clears invalidate */
        mtlr    r4
        blr

        .globl  dcache_status
dcache_status:
        mfspr   r3, HID0
        rlwinm  r3, r3, (31 - HID0_DCE_SHIFT + 1), 31, 31
        blr

        .globl  flush_dcache
flush_dcache:
        lis     r3, 0
        lis     r5, CONFIG_SYS_CACHELINE_SIZE
1:      cmp     0, 1, r3, r5
        bge     2f
        lwz     r5, 0(r3)
        lis     r5, CONFIG_SYS_CACHELINE_SIZE
        addi    r3, r3, 0x4
        b       1b
2:      blr

/*-------------------------------------------------------------------*/

/*
 * void relocate_code (addr_sp, gd, addr_moni)
 *
 * This "function" does not return, instead it continues in RAM
 * after relocating the monitor code.
 *
 * r3 = dest
 * r4 = src
 * r5 = length in bytes
 * r6 = cachelinesize
 */
        .globl  relocate_code
relocate_code:
        mr      r1,  r3         /* Set new stack pointer        */
        mr      r9,  r4         /* Save copy of Global Data pointer */
        mr      r10, r5         /* Save copy of Destination Address */

        GET_GOT
        mr      r3,  r5                         /* Destination Address */
        lis     r4, CONFIG_SYS_MONITOR_BASE@h           /* Source      Address */
        ori     r4, r4, CONFIG_SYS_MONITOR_BASE@l
        lwz     r5, GOT(__bss_start)
        sub     r5, r5, r4
        li      r6, CONFIG_SYS_CACHELINE_SIZE           /* Cache Line Size */

        /*
         * Fix GOT pointer:
         *
         * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE)
         *              + Destination Address
         *
         * Offset:
         */
        sub     r15, r10, r4

        /* First our own GOT */
        add     r12, r12, r15
        /* then the one used by the C code */
        add     r30, r30, r15

        /*
         * Now relocate code
         */

        cmplw   cr1,r3,r4
        addi    r0,r5,3
        srwi.   r0,r0,2
        beq     cr1,4f          /* In place copy is not necessary */
        beq     7f              /* Protect against 0 count        */
        mtctr   r0
        bge     cr1,2f
        la      r8,-4(r4)
        la      r7,-4(r3)

        /* copy */
1:      lwzu    r0,4(r8)
        stwu    r0,4(r7)
        bdnz    1b

        addi    r0,r5,3
        srwi.   r0,r0,2
        mtctr   r0
        la      r8,-4(r4)
        la      r7,-4(r3)

        /* and compare */
20:     lwzu    r20,4(r8)
        lwzu    r21,4(r7)
        xor. r22, r20, r21
        bne  30f
        bdnz    20b
        b 4f

        /* compare failed */
30:     li r3, 0
        blr

2:      slwi    r0,r0,2 /* re copy in reverse order ... y do we needed it? */
        add     r8,r4,r0
        add     r7,r3,r0
3:      lwzu    r0,-4(r8)
        stwu    r0,-4(r7)
        bdnz    3b

/*
 * Now flush the cache: note that we must start from a cache aligned
 * address. Otherwise we might miss one cache line.
 */
4:      cmpwi   r6,0
        add     r5,r3,r5
        beq     7f              /* Always flush prefetch queue in any case */
        subi    r0,r6,1
        andc    r3,r3,r0
        mr      r4,r3
5:      dcbst   0,r4
        add     r4,r4,r6
        cmplw   r4,r5
        blt     5b
        sync                    /* Wait for all dcbst to complete on bus */
        mr      r4,r3
6:      icbi    0,r4
        add     r4,r4,r6
        cmplw   r4,r5
        blt     6b
7:      sync                    /* Wait for all icbi to complete on bus */
        isync

/*
 * We are done. Do not return, instead branch to second part of board
 * initialization, now running from RAM.
 */
        addi    r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
        mtlr    r0
        blr

in_ram:

        /*
         * Relocation Function, r12 point to got2+0x8000
         *
         * Adjust got2 pointers, no need to check for 0, this code
         * already puts a few entries in the table.
         */
        li      r0,__got2_entries@sectoff@l
        la      r3,GOT(_GOT2_TABLE_)
        lwz     r11,GOT(_GOT2_TABLE_)
        mtctr   r0
        sub     r11,r3,r11
        addi    r3,r3,-4
1:      lwzu    r0,4(r3)
        cmpwi   r0,0
        beq-    2f
        add     r0,r0,r11
        stw     r0,0(r3)
2:      bdnz    1b

#ifndef CONFIG_NAND_SPL
        /*
         * Now adjust the fixups and the pointers to the fixups
         * in case we need to move ourselves again.
         */
        li      r0,__fixup_entries@sectoff@l
        lwz     r3,GOT(_FIXUP_TABLE_)
        cmpwi   r0,0
        mtctr   r0
        addi    r3,r3,-4
        beq     4f
3:      lwzu    r4,4(r3)
        lwzux   r0,r4,r11
        cmpwi   r0,0
        add     r0,r0,r11
        stw     r10,0(r3)
        beq-    5f
        stw     r0,0(r4)
5:      bdnz    3b
4:
#endif

clear_bss:
        /*
         * Now clear BSS segment
         */
        lwz     r3,GOT(__bss_start)
#if defined(CONFIG_HYMOD)
        /*
         * For HYMOD - the environment is the very last item in flash.
         * The real .bss stops just before environment starts, so only
         * clear up to that point.
         *
         * taken from mods for FADS board
         */
        lwz     r4,GOT(environment)
#else
        lwz     r4,GOT(_end)
#endif

        cmplw   0, r3, r4
        beq     6f

        li      r0, 0
5:
        stw     r0, 0(r3)
        addi    r3, r3, 4
        cmplw   0, r3, r4
        bne     5b
6:

        mr      r3, r9          /* Global Data pointer          */
        mr      r4, r10         /* Destination Address          */
        bl      board_init_r

#ifndef CONFIG_NAND_SPL
        /*
         * Copy exception vector code to low memory
         *
         * r3: dest_addr
         * r7: source address, r8: end address, r9: target address
         */
        .globl  trap_init
trap_init:
        mflr    r4              /* save link register */
        GET_GOT
        lwz     r7, GOT(_start)
        lwz     r8, GOT(_end_of_vectors)

        li      r9, 0x100       /* reset vector always at 0x100 */

        cmplw   0, r7, r8
        bgelr                   /* return if r7>=r8 - just in case */
1:
        lwz     r0, 0(r7)
        stw     r0, 0(r9)
        addi    r7, r7, 4
        addi    r9, r9, 4
        cmplw   0, r7, r8
        bne     1b

        /*
         * relocate `hdlr' and `int_return' entries
         */
        li      r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
        li      r8, Alignment - _start + EXC_OFF_SYS_RESET
2:
        bl      trap_reloc
        addi    r7, r7, 0x100           /* next exception vector */
        cmplw   0, r7, r8
        blt     2b

        li      r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
        bl      trap_reloc

        li      r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
        bl      trap_reloc

        li      r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
        li      r8, SystemCall - _start + EXC_OFF_SYS_RESET
3:
        bl      trap_reloc
        addi    r7, r7, 0x100           /* next exception vector */
        cmplw   0, r7, r8
        blt     3b

        li      r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
        li      r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
4:
        bl      trap_reloc
        addi    r7, r7, 0x100           /* next exception vector */
        cmplw   0, r7, r8
        blt     4b

        mfmsr   r3                      /* now that the vectors have */
        lis     r7, MSR_IP@h            /* relocated into low memory */
        ori     r7, r7, MSR_IP@l        /* MSR[IP] can be turned off */
        andc    r3, r3, r7              /* (if it was on) */
        SYNC                            /* Some chip revs need this... */
        mtmsr   r3
        SYNC

        mtlr    r4                      /* restore link register    */
        blr

#endif /* !CONFIG_NAND_SPL */

#ifdef CONFIG_SYS_INIT_RAM_LOCK
lock_ram_in_cache:
        /* Allocate Initial RAM in data cache.
         */
        lis     r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
        ori     r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
        li      r4, ((CONFIG_SYS_INIT_RAM_SIZE & ~31) + \
                     (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
        mtctr   r4
1:
        dcbz    r0, r3
        addi    r3, r3, 32
        bdnz    1b

        /* Lock the data cache */
        mfspr   r0, HID0
        ori     r0, r0, HID0_DLOCK
        sync
        mtspr   HID0, r0
        sync
        blr

#ifndef CONFIG_NAND_SPL
.globl unlock_ram_in_cache
unlock_ram_in_cache:
        /* invalidate the INIT_RAM section */
        lis     r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
        ori     r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
        li      r4, ((CONFIG_SYS_INIT_RAM_SIZE & ~31) + \
                     (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
        mtctr   r4
1:      icbi    r0, r3
        dcbi    r0, r3
        addi    r3, r3, 32
        bdnz    1b
        sync                    /* Wait for all icbi to complete on bus */
        isync

        /* Unlock the data cache and invalidate it */
        mfspr   r3, HID0
        li      r5, HID0_DLOCK|HID0_DCFI
        andc    r3, r3, r5              /* no invalidate, unlock */
        ori     r5, r3, HID0_DCFI       /* invalidate, unlock */
        sync
        mtspr   HID0, r5                /* invalidate, unlock */
        sync
        mtspr   HID0, r3                /* no invalidate, unlock */
        blr
#endif /* !CONFIG_NAND_SPL */
#endif /* CONFIG_SYS_INIT_RAM_LOCK */

#ifdef CONFIG_SYS_FLASHBOOT
map_flash_by_law1:
        /* When booting from ROM (Flash or EPROM), clear the  */
        /* Address Mask in OR0 so ROM appears everywhere      */
        /*----------------------------------------------------*/
        lis     r3, (CONFIG_SYS_IMMR)@h  /* r3 <= CONFIG_SYS_IMMR    */
        lwz     r4, OR0@l(r3)
        li      r5, 0x7fff        /* r5 <= 0x00007FFFF */
        and     r4, r4, r5
        stw     r4, OR0@l(r3)     /* OR0 <= OR0 & 0x00007FFFF */

        /* As MPC8349E User's Manual presented, when RCW[BMS] is set to 0,
         * system will boot from 0x0000_0100, and the LBLAWBAR0[BASE_ADDR]
         * reset value is 0x00000; when RCW[BMS] is set to 1, system will boot
         * from 0xFFF0_0100, and the LBLAWBAR0[BASE_ADDR] reset value is
         * 0xFF800.  From the hard resetting to here, the processor fetched and
         * executed the instructions one by one.  There is not absolutely
         * jumping happened.  Laterly, the u-boot code has to do an absolutely
         * jumping to tell the CPU instruction fetching component what the
         * u-boot TEXT base address is.  Because the TEXT base resides in the
         * boot ROM memory space, to garantee the code can run smoothly after
         * that jumping, we must map in the entire boot ROM by Local Access
         * Window.  Sometimes, we desire an non-0x00000 or non-0xFF800 starting
         * address for boot ROM, such as 0xFE000000.  In this case, the default
         * LBIU Local Access Widow 0 will not cover this memory space.  So, we
         * need another window to map in it.
         */
        lis r4, (CONFIG_SYS_FLASH_BASE)@h
        ori r4, r4, (CONFIG_SYS_FLASH_BASE)@l
        stw r4, LBLAWBAR1(r3) /* LBLAWBAR1 <= CONFIG_SYS_FLASH_BASE */

        /* Store 0x80000012 + log2(CONFIG_SYS_FLASH_SIZE) into LBLAWAR1 */
        lis r4, (0x80000012)@h
        ori r4, r4, (0x80000012)@l
        li r5, CONFIG_SYS_FLASH_SIZE
1:      srawi. r5, r5, 1        /* r5 = r5 >> 1 */
        addi r4, r4, 1
        bne 1b

        stw r4, LBLAWAR1(r3) /* LBLAWAR1 <= 8MB Flash Size */
        blr

        /* Though all the LBIU Local Access Windows and LBC Banks will be
         * initialized in the C code, we'd better configure boot ROM's
         * window 0 and bank 0 correctly at here.
         */
remap_flash_by_law0:
        /* Initialize the BR0 with the boot ROM starting address. */
        lwz r4, BR0(r3)
        li  r5, 0x7FFF
        and r4, r4, r5
        lis r5, (CONFIG_SYS_FLASH_BASE & 0xFFFF8000)@h
        ori r5, r5, (CONFIG_SYS_FLASH_BASE & 0xFFFF8000)@l
        or  r5, r5, r4
        stw r5, BR0(r3) /* r5 <= (CONFIG_SYS_FLASH_BASE & 0xFFFF8000) | (BR0 & 0x00007FFF) */

        lwz r4, OR0(r3)
        lis r5, ~((CONFIG_SYS_FLASH_SIZE << 4) - 1)
        or r4, r4, r5
        stw r4, OR0(r3)

        lis r4, (CONFIG_SYS_FLASH_BASE)@h
        ori r4, r4, (CONFIG_SYS_FLASH_BASE)@l
        stw r4, LBLAWBAR0(r3) /* LBLAWBAR0 <= CONFIG_SYS_FLASH_BASE */

        /* Store 0x80000012 + log2(CONFIG_SYS_FLASH_SIZE) into LBLAWAR0 */
        lis r4, (0x80000012)@h
        ori r4, r4, (0x80000012)@l
        li r5, CONFIG_SYS_FLASH_SIZE
1:      srawi. r5, r5, 1 /* r5 = r5 >> 1 */
        addi r4, r4, 1
        bne 1b
        stw r4, LBLAWAR0(r3) /* LBLAWAR0 <= Flash Size */


        xor r4, r4, r4
        stw r4, LBLAWBAR1(r3)
        stw r4, LBLAWAR1(r3) /* Off LBIU LAW1 */
        blr
#endif /* CONFIG_SYS_FLASHBOOT */