arch/x86/cpu/queensbay/Kconfig

   1 #
   2 # Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
   3 #
   4 # SPDX-License-Identifier:      GPL-2.0+
   5 #
   6
   7 config INTEL_QUEENSBAY
   8         bool
   9         select HAVE_FSP
  10         select HAVE_CMC
  11         select ARCH_EARLY_INIT_R
  12         imply AHCI_PCI
  13         imply ICH_SPI
  14         imply INTEL_ICH6_GPIO
  15         imply MMC
  16         imply MMC_PCI
  17         imply MMC_SDHCI
  18         imply MMC_SDHCI_SDMA
  19         imply PCH_GBE
  20         imply SCSI
  21         imply SPI_FLASH
  22         imply SYS_NS16550
  23         imply USB
  24         imply USB_EHCI_HCD
  25         imply VIDEO_VESA
  26
  27 if INTEL_QUEENSBAY
  28
  29 config HAVE_CMC
  30         bool "Add a Chipset Micro Code state machine binary"
  31         help
  32           Select this option to add a Chipset Micro Code state machine binary
  33           to the resulting U-Boot image. It is a 64K data block of machine
  34           specific code which must be put in the flash for the processor to
  35           access when powered up before system BIOS is executed.
  36
  37 config CMC_FILE
  38         string "Chipset Micro Code state machine filename"
  39         depends on HAVE_CMC
  40         default "cmc.bin"
  41         help
  42           The filename of the file to use as Chipset Micro Code state machine
  43           binary in the board directory.
  44
  45 config CMC_ADDR
  46         hex "Chipset Micro Code state machine binary location"
  47         depends on HAVE_CMC
  48         default 0xfffb0000
  49         help
  50           The location of the CMC binary is determined by a strap. It must be
  51           put in flash at a location matching the strap-determined base address.
  52
  53           The default base address of 0xfffb0000 indicates that the binary must
  54           be located at offset 0xb0000 from the beginning of a 1MB flash device.
  55
  56 config CPU_ADDR_BITS
  57         int
  58         default 32
  59
  60 config DISABLE_IGD
  61         bool "Disable Integrated Graphics Device (IGD)"
  62         help
  63           Disable the Integrated Graphics Device (IGD) so that it does not
  64           show in the PCI configuration space as a VGA disaplay controller.
  65           This gives a chance for U-Boot to run PCI/PCIe based graphics
  66           card's VGA BIOS and use that card for the graphics console.
  67
  68 endif