]> git.ipfire.org Git - people/ms/u-boot.git/blob - arch/x86/dts/minnowmax.dts
x86: baytrail: Change "fsp, mrc-init-tseg-size" default value to 1
[people/ms/u-boot.git] / arch / x86 / dts / minnowmax.dts
1 /*
2 * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7 /dts-v1/;
8
9 #include <dt-bindings/gpio/x86-gpio.h>
10 #include <dt-bindings/interrupt-router/intel-irq.h>
11
12 /include/ "skeleton.dtsi"
13 /include/ "serial.dtsi"
14 /include/ "rtc.dtsi"
15 /include/ "tsc_timer.dtsi"
16 /include/ "coreboot_fb.dtsi"
17
18 / {
19 model = "Intel Minnowboard Max";
20 compatible = "intel,minnowmax", "intel,baytrail";
21
22 aliases {
23 serial0 = &serial;
24 spi0 = &spi;
25 };
26
27 config {
28 silent_console = <0>;
29 };
30
31 pch_pinctrl {
32 compatible = "intel,x86-pinctrl";
33 reg = <0 0>;
34
35 /* GPIO E0 */
36 soc_gpio_s5_0@0 {
37 gpio-offset = <0x80 0>;
38 mode-gpio;
39 output-value = <0>;
40 direction = <PIN_OUTPUT>;
41 };
42
43 /* GPIO E1 */
44 soc_gpio_s5_1@0 {
45 gpio-offset = <0x80 1>;
46 mode-gpio;
47 output-value = <0>;
48 direction = <PIN_OUTPUT>;
49 };
50
51 /* GPIO E2 */
52 soc_gpio_s5_2@0 {
53 gpio-offset = <0x80 2>;
54 mode-gpio;
55 output-value = <0>;
56 direction = <PIN_OUTPUT>;
57 };
58
59 pin_usb_host_en0@0 {
60 gpio-offset = <0x80 8>;
61 mode-gpio;
62 output-value = <1>;
63 direction = <PIN_OUTPUT>;
64 };
65
66 pin_usb_host_en1@0 {
67 gpio-offset = <0x80 9>;
68 mode-gpio;
69 output-value = <1>;
70 direction = <PIN_OUTPUT>;
71 };
72
73 /*
74 * As of today, the latest version FSP (gold4) for BayTrail
75 * misses the PAD configuration of the SD controller's Card
76 * Detect signal. The default PAD value for the CD pin sets
77 * the pin to work in GPIO mode, which causes card detect
78 * status cannot be reflected by the Present State register
79 * in the SD controller (bit 16 & bit 18 are always zero).
80 *
81 * Configure this pin to function 1 (SD controller).
82 */
83 sdmmc3_cd@0 {
84 pad-offset = <0x3a0>;
85 mode-func = <1>;
86 };
87 };
88
89 chosen {
90 stdout-path = "/serial";
91 };
92
93 cpus {
94 #address-cells = <1>;
95 #size-cells = <0>;
96
97 cpu@0 {
98 device_type = "cpu";
99 compatible = "intel,baytrail-cpu";
100 reg = <0>;
101 intel,apic-id = <0>;
102 };
103
104 cpu@1 {
105 device_type = "cpu";
106 compatible = "intel,baytrail-cpu";
107 reg = <1>;
108 intel,apic-id = <4>;
109 };
110
111 };
112
113 pci {
114 compatible = "intel,pci-baytrail", "pci-x86";
115 #address-cells = <3>;
116 #size-cells = <2>;
117 u-boot,dm-pre-reloc;
118 ranges = <0x02000000 0x0 0x80000000 0x80000000 0 0x40000000
119 0x42000000 0x0 0xc0000000 0xc0000000 0 0x20000000
120 0x01000000 0x0 0x2000 0x2000 0 0xe000>;
121
122 pch@1f,0 {
123 reg = <0x0000f800 0 0 0 0>;
124 compatible = "pci8086,0f1c", "intel,pch9";
125 #address-cells = <1>;
126 #size-cells = <1>;
127
128 irq-router {
129 compatible = "intel,irq-router";
130 intel,pirq-config = "ibase";
131 intel,ibase-offset = <0x50>;
132 intel,actl-addr = <0>;
133 intel,pirq-link = <8 8>;
134 intel,pirq-mask = <0xdee0>;
135 intel,pirq-routing = <
136 /* BayTrail PCI devices */
137 PCI_BDF(0, 2, 0) INTA PIRQA
138 PCI_BDF(0, 3, 0) INTA PIRQA
139 PCI_BDF(0, 16, 0) INTA PIRQA
140 PCI_BDF(0, 17, 0) INTA PIRQA
141 PCI_BDF(0, 18, 0) INTA PIRQA
142 PCI_BDF(0, 19, 0) INTA PIRQA
143 PCI_BDF(0, 20, 0) INTA PIRQA
144 PCI_BDF(0, 21, 0) INTA PIRQA
145 PCI_BDF(0, 22, 0) INTA PIRQA
146 PCI_BDF(0, 23, 0) INTA PIRQA
147 PCI_BDF(0, 24, 0) INTA PIRQA
148 PCI_BDF(0, 24, 1) INTC PIRQC
149 PCI_BDF(0, 24, 2) INTD PIRQD
150 PCI_BDF(0, 24, 3) INTB PIRQB
151 PCI_BDF(0, 24, 4) INTA PIRQA
152 PCI_BDF(0, 24, 5) INTC PIRQC
153 PCI_BDF(0, 24, 6) INTD PIRQD
154 PCI_BDF(0, 24, 7) INTB PIRQB
155 PCI_BDF(0, 26, 0) INTA PIRQA
156 PCI_BDF(0, 27, 0) INTA PIRQA
157 PCI_BDF(0, 28, 0) INTA PIRQA
158 PCI_BDF(0, 28, 1) INTB PIRQB
159 PCI_BDF(0, 28, 2) INTC PIRQC
160 PCI_BDF(0, 28, 3) INTD PIRQD
161 PCI_BDF(0, 29, 0) INTA PIRQA
162 PCI_BDF(0, 30, 0) INTA PIRQA
163 PCI_BDF(0, 30, 1) INTD PIRQD
164 PCI_BDF(0, 30, 2) INTB PIRQB
165 PCI_BDF(0, 30, 3) INTC PIRQC
166 PCI_BDF(0, 30, 4) INTD PIRQD
167 PCI_BDF(0, 30, 5) INTB PIRQB
168 PCI_BDF(0, 31, 3) INTB PIRQB
169
170 /*
171 * PCIe root ports downstream
172 * interrupts
173 */
174 PCI_BDF(1, 0, 0) INTA PIRQA
175 PCI_BDF(1, 0, 0) INTB PIRQB
176 PCI_BDF(1, 0, 0) INTC PIRQC
177 PCI_BDF(1, 0, 0) INTD PIRQD
178 PCI_BDF(2, 0, 0) INTA PIRQB
179 PCI_BDF(2, 0, 0) INTB PIRQC
180 PCI_BDF(2, 0, 0) INTC PIRQD
181 PCI_BDF(2, 0, 0) INTD PIRQA
182 PCI_BDF(3, 0, 0) INTA PIRQC
183 PCI_BDF(3, 0, 0) INTB PIRQD
184 PCI_BDF(3, 0, 0) INTC PIRQA
185 PCI_BDF(3, 0, 0) INTD PIRQB
186 PCI_BDF(4, 0, 0) INTA PIRQD
187 PCI_BDF(4, 0, 0) INTB PIRQA
188 PCI_BDF(4, 0, 0) INTC PIRQB
189 PCI_BDF(4, 0, 0) INTD PIRQC
190 >;
191 };
192
193 spi: spi {
194 #address-cells = <1>;
195 #size-cells = <0>;
196 compatible = "intel,ich9-spi";
197 spi-flash@0 {
198 #address-cells = <1>;
199 #size-cells = <1>;
200 reg = <0>;
201 compatible = "stmicro,n25q064a",
202 "spi-flash";
203 memory-map = <0xff800000 0x00800000>;
204 rw-mrc-cache {
205 label = "rw-mrc-cache";
206 reg = <0x006f0000 0x00010000>;
207 };
208 };
209 };
210
211 gpioa {
212 compatible = "intel,ich6-gpio";
213 u-boot,dm-pre-reloc;
214 reg = <0 0x20>;
215 bank-name = "A";
216 use-lvl-write-cache;
217 };
218
219 gpiob {
220 compatible = "intel,ich6-gpio";
221 u-boot,dm-pre-reloc;
222 reg = <0x20 0x20>;
223 bank-name = "B";
224 use-lvl-write-cache;
225 };
226
227 gpioc {
228 compatible = "intel,ich6-gpio";
229 u-boot,dm-pre-reloc;
230 reg = <0x40 0x20>;
231 bank-name = "C";
232 use-lvl-write-cache;
233 };
234
235 gpiod {
236 compatible = "intel,ich6-gpio";
237 u-boot,dm-pre-reloc;
238 reg = <0x60 0x20>;
239 bank-name = "D";
240 use-lvl-write-cache;
241 };
242
243 gpioe {
244 compatible = "intel,ich6-gpio";
245 u-boot,dm-pre-reloc;
246 reg = <0x80 0x20>;
247 bank-name = "E";
248 use-lvl-write-cache;
249 };
250
251 gpiof {
252 compatible = "intel,ich6-gpio";
253 u-boot,dm-pre-reloc;
254 reg = <0xA0 0x20>;
255 bank-name = "F";
256 use-lvl-write-cache;
257 };
258 };
259 };
260
261 fsp {
262 compatible = "intel,baytrail-fsp";
263 fsp,mrc-init-tseg-size = <1>;
264 fsp,mrc-init-mmio-size = <0x800>;
265 fsp,mrc-init-spd-addr1 = <0xa0>;
266 fsp,mrc-init-spd-addr2 = <0xa2>;
267 fsp,emmc-boot-mode = <1>;
268 fsp,enable-sdio;
269 fsp,enable-sdcard;
270 fsp,enable-hsuart1;
271 fsp,enable-spi;
272 fsp,enable-sata;
273 fsp,sata-mode = <1>;
274 fsp,enable-lpe;
275 fsp,lpss-sio-enable-pci-mode;
276 fsp,enable-dma0;
277 fsp,enable-dma1;
278 fsp,enable-i2c0;
279 fsp,enable-i2c1;
280 fsp,enable-i2c2;
281 fsp,enable-i2c3;
282 fsp,enable-i2c4;
283 fsp,enable-i2c5;
284 fsp,enable-i2c6;
285 fsp,enable-pwm0;
286 fsp,enable-pwm1;
287 fsp,igd-dvmt50-pre-alloc = <2>;
288 fsp,aperture-size = <2>;
289 fsp,gtt-size = <2>;
290 fsp,serial-debug-port-address = <0x3f8>;
291 fsp,serial-debug-port-type = <1>;
292 fsp,scc-enable-pci-mode;
293 fsp,os-selection = <4>;
294 fsp,emmc45-ddr50-enabled;
295 fsp,emmc45-retune-timer-value = <8>;
296 fsp,enable-igd;
297 fsp,enable-memory-down;
298 fsp,memory-down-params {
299 compatible = "intel,baytrail-fsp-mdp";
300 fsp,dram-speed = <1>;
301 fsp,dram-type = <1>;
302 fsp,dimm-0-enable;
303 fsp,dimm-width = <1>;
304 fsp,dimm-density = <2>;
305 fsp,dimm-bus-width = <3>;
306 fsp,dimm-sides = <0>;
307 fsp,dimm-tcl = <0xb>;
308 fsp,dimm-trpt-rcd = <0xb>;
309 fsp,dimm-twr = <0xc>;
310 fsp,dimm-twtr = <6>;
311 fsp,dimm-trrd = <6>;
312 fsp,dimm-trtp = <6>;
313 fsp,dimm-tfaw = <0x14>;
314 };
315 };
316
317 microcode {
318 update@0 {
319 #include "microcode/m0130673325.dtsi"
320 };
321 update@1 {
322 #include "microcode/m0130679907.dtsi"
323 };
324 };
325
326 };