]> git.ipfire.org Git - thirdparty/qemu.git/blob - block.c
docs: document missing POWERDOWN event
[thirdparty/qemu.git] / block.c
1 /*
2 * QEMU System Emulator block driver
3 *
4 * Copyright (c) 2003 Fabrice Bellard
5 *
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
12 *
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
15 *
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
23 */
24 #include "config-host.h"
25 #include "qemu-common.h"
26 #include "trace.h"
27 #include "block/block_int.h"
28 #include "block/blockjob.h"
29 #include "qemu/module.h"
30 #include "qapi/qmp/qjson.h"
31 #include "sysemu/sysemu.h"
32 #include "qemu/notify.h"
33 #include "block/coroutine.h"
34 #include "block/qapi.h"
35 #include "qmp-commands.h"
36 #include "qemu/timer.h"
37 #include "qapi-event.h"
38
39 #ifdef CONFIG_BSD
40 #include <sys/types.h>
41 #include <sys/stat.h>
42 #include <sys/ioctl.h>
43 #include <sys/queue.h>
44 #ifndef __DragonFly__
45 #include <sys/disk.h>
46 #endif
47 #endif
48
49 #ifdef _WIN32
50 #include <windows.h>
51 #endif
52
53 struct BdrvDirtyBitmap {
54 HBitmap *bitmap;
55 QLIST_ENTRY(BdrvDirtyBitmap) list;
56 };
57
58 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
59
60 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load);
61 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
62 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
63 BlockDriverCompletionFunc *cb, void *opaque);
64 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
65 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
66 BlockDriverCompletionFunc *cb, void *opaque);
67 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
68 int64_t sector_num, int nb_sectors,
69 QEMUIOVector *iov);
70 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
71 int64_t sector_num, int nb_sectors,
72 QEMUIOVector *iov);
73 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
74 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
75 BdrvRequestFlags flags);
76 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
77 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
78 BdrvRequestFlags flags);
79 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
80 int64_t sector_num,
81 QEMUIOVector *qiov,
82 int nb_sectors,
83 BdrvRequestFlags flags,
84 BlockDriverCompletionFunc *cb,
85 void *opaque,
86 bool is_write);
87 static void coroutine_fn bdrv_co_do_rw(void *opaque);
88 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
89 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags);
90
91 static QTAILQ_HEAD(, BlockDriverState) bdrv_states =
92 QTAILQ_HEAD_INITIALIZER(bdrv_states);
93
94 static QTAILQ_HEAD(, BlockDriverState) graph_bdrv_states =
95 QTAILQ_HEAD_INITIALIZER(graph_bdrv_states);
96
97 static QLIST_HEAD(, BlockDriver) bdrv_drivers =
98 QLIST_HEAD_INITIALIZER(bdrv_drivers);
99
100 /* If non-zero, use only whitelisted block drivers */
101 static int use_bdrv_whitelist;
102
103 #ifdef _WIN32
104 static int is_windows_drive_prefix(const char *filename)
105 {
106 return (((filename[0] >= 'a' && filename[0] <= 'z') ||
107 (filename[0] >= 'A' && filename[0] <= 'Z')) &&
108 filename[1] == ':');
109 }
110
111 int is_windows_drive(const char *filename)
112 {
113 if (is_windows_drive_prefix(filename) &&
114 filename[2] == '\0')
115 return 1;
116 if (strstart(filename, "\\\\.\\", NULL) ||
117 strstart(filename, "//./", NULL))
118 return 1;
119 return 0;
120 }
121 #endif
122
123 /* throttling disk I/O limits */
124 void bdrv_set_io_limits(BlockDriverState *bs,
125 ThrottleConfig *cfg)
126 {
127 int i;
128
129 throttle_config(&bs->throttle_state, cfg);
130
131 for (i = 0; i < 2; i++) {
132 qemu_co_enter_next(&bs->throttled_reqs[i]);
133 }
134 }
135
136 /* this function drain all the throttled IOs */
137 static bool bdrv_start_throttled_reqs(BlockDriverState *bs)
138 {
139 bool drained = false;
140 bool enabled = bs->io_limits_enabled;
141 int i;
142
143 bs->io_limits_enabled = false;
144
145 for (i = 0; i < 2; i++) {
146 while (qemu_co_enter_next(&bs->throttled_reqs[i])) {
147 drained = true;
148 }
149 }
150
151 bs->io_limits_enabled = enabled;
152
153 return drained;
154 }
155
156 void bdrv_io_limits_disable(BlockDriverState *bs)
157 {
158 bs->io_limits_enabled = false;
159
160 bdrv_start_throttled_reqs(bs);
161
162 throttle_destroy(&bs->throttle_state);
163 }
164
165 static void bdrv_throttle_read_timer_cb(void *opaque)
166 {
167 BlockDriverState *bs = opaque;
168 qemu_co_enter_next(&bs->throttled_reqs[0]);
169 }
170
171 static void bdrv_throttle_write_timer_cb(void *opaque)
172 {
173 BlockDriverState *bs = opaque;
174 qemu_co_enter_next(&bs->throttled_reqs[1]);
175 }
176
177 /* should be called before bdrv_set_io_limits if a limit is set */
178 void bdrv_io_limits_enable(BlockDriverState *bs)
179 {
180 assert(!bs->io_limits_enabled);
181 throttle_init(&bs->throttle_state,
182 bdrv_get_aio_context(bs),
183 QEMU_CLOCK_VIRTUAL,
184 bdrv_throttle_read_timer_cb,
185 bdrv_throttle_write_timer_cb,
186 bs);
187 bs->io_limits_enabled = true;
188 }
189
190 /* This function makes an IO wait if needed
191 *
192 * @nb_sectors: the number of sectors of the IO
193 * @is_write: is the IO a write
194 */
195 static void bdrv_io_limits_intercept(BlockDriverState *bs,
196 unsigned int bytes,
197 bool is_write)
198 {
199 /* does this io must wait */
200 bool must_wait = throttle_schedule_timer(&bs->throttle_state, is_write);
201
202 /* if must wait or any request of this type throttled queue the IO */
203 if (must_wait ||
204 !qemu_co_queue_empty(&bs->throttled_reqs[is_write])) {
205 qemu_co_queue_wait(&bs->throttled_reqs[is_write]);
206 }
207
208 /* the IO will be executed, do the accounting */
209 throttle_account(&bs->throttle_state, is_write, bytes);
210
211
212 /* if the next request must wait -> do nothing */
213 if (throttle_schedule_timer(&bs->throttle_state, is_write)) {
214 return;
215 }
216
217 /* else queue next request for execution */
218 qemu_co_queue_next(&bs->throttled_reqs[is_write]);
219 }
220
221 size_t bdrv_opt_mem_align(BlockDriverState *bs)
222 {
223 if (!bs || !bs->drv) {
224 /* 4k should be on the safe side */
225 return 4096;
226 }
227
228 return bs->bl.opt_mem_alignment;
229 }
230
231 /* check if the path starts with "<protocol>:" */
232 static int path_has_protocol(const char *path)
233 {
234 const char *p;
235
236 #ifdef _WIN32
237 if (is_windows_drive(path) ||
238 is_windows_drive_prefix(path)) {
239 return 0;
240 }
241 p = path + strcspn(path, ":/\\");
242 #else
243 p = path + strcspn(path, ":/");
244 #endif
245
246 return *p == ':';
247 }
248
249 int path_is_absolute(const char *path)
250 {
251 #ifdef _WIN32
252 /* specific case for names like: "\\.\d:" */
253 if (is_windows_drive(path) || is_windows_drive_prefix(path)) {
254 return 1;
255 }
256 return (*path == '/' || *path == '\\');
257 #else
258 return (*path == '/');
259 #endif
260 }
261
262 /* if filename is absolute, just copy it to dest. Otherwise, build a
263 path to it by considering it is relative to base_path. URL are
264 supported. */
265 void path_combine(char *dest, int dest_size,
266 const char *base_path,
267 const char *filename)
268 {
269 const char *p, *p1;
270 int len;
271
272 if (dest_size <= 0)
273 return;
274 if (path_is_absolute(filename)) {
275 pstrcpy(dest, dest_size, filename);
276 } else {
277 p = strchr(base_path, ':');
278 if (p)
279 p++;
280 else
281 p = base_path;
282 p1 = strrchr(base_path, '/');
283 #ifdef _WIN32
284 {
285 const char *p2;
286 p2 = strrchr(base_path, '\\');
287 if (!p1 || p2 > p1)
288 p1 = p2;
289 }
290 #endif
291 if (p1)
292 p1++;
293 else
294 p1 = base_path;
295 if (p1 > p)
296 p = p1;
297 len = p - base_path;
298 if (len > dest_size - 1)
299 len = dest_size - 1;
300 memcpy(dest, base_path, len);
301 dest[len] = '\0';
302 pstrcat(dest, dest_size, filename);
303 }
304 }
305
306 void bdrv_get_full_backing_filename(BlockDriverState *bs, char *dest, size_t sz)
307 {
308 if (bs->backing_file[0] == '\0' || path_has_protocol(bs->backing_file)) {
309 pstrcpy(dest, sz, bs->backing_file);
310 } else {
311 path_combine(dest, sz, bs->filename, bs->backing_file);
312 }
313 }
314
315 void bdrv_register(BlockDriver *bdrv)
316 {
317 /* Block drivers without coroutine functions need emulation */
318 if (!bdrv->bdrv_co_readv) {
319 bdrv->bdrv_co_readv = bdrv_co_readv_em;
320 bdrv->bdrv_co_writev = bdrv_co_writev_em;
321
322 /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
323 * the block driver lacks aio we need to emulate that too.
324 */
325 if (!bdrv->bdrv_aio_readv) {
326 /* add AIO emulation layer */
327 bdrv->bdrv_aio_readv = bdrv_aio_readv_em;
328 bdrv->bdrv_aio_writev = bdrv_aio_writev_em;
329 }
330 }
331
332 QLIST_INSERT_HEAD(&bdrv_drivers, bdrv, list);
333 }
334
335 /* create a new block device (by default it is empty) */
336 BlockDriverState *bdrv_new(const char *device_name, Error **errp)
337 {
338 BlockDriverState *bs;
339 int i;
340
341 if (bdrv_find(device_name)) {
342 error_setg(errp, "Device with id '%s' already exists",
343 device_name);
344 return NULL;
345 }
346 if (bdrv_find_node(device_name)) {
347 error_setg(errp, "Device with node-name '%s' already exists",
348 device_name);
349 return NULL;
350 }
351
352 bs = g_malloc0(sizeof(BlockDriverState));
353 QLIST_INIT(&bs->dirty_bitmaps);
354 pstrcpy(bs->device_name, sizeof(bs->device_name), device_name);
355 if (device_name[0] != '\0') {
356 QTAILQ_INSERT_TAIL(&bdrv_states, bs, device_list);
357 }
358 for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
359 QLIST_INIT(&bs->op_blockers[i]);
360 }
361 bdrv_iostatus_disable(bs);
362 notifier_list_init(&bs->close_notifiers);
363 notifier_with_return_list_init(&bs->before_write_notifiers);
364 qemu_co_queue_init(&bs->throttled_reqs[0]);
365 qemu_co_queue_init(&bs->throttled_reqs[1]);
366 bs->refcnt = 1;
367 bs->aio_context = qemu_get_aio_context();
368
369 return bs;
370 }
371
372 void bdrv_add_close_notifier(BlockDriverState *bs, Notifier *notify)
373 {
374 notifier_list_add(&bs->close_notifiers, notify);
375 }
376
377 BlockDriver *bdrv_find_format(const char *format_name)
378 {
379 BlockDriver *drv1;
380 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
381 if (!strcmp(drv1->format_name, format_name)) {
382 return drv1;
383 }
384 }
385 return NULL;
386 }
387
388 static int bdrv_is_whitelisted(BlockDriver *drv, bool read_only)
389 {
390 static const char *whitelist_rw[] = {
391 CONFIG_BDRV_RW_WHITELIST
392 };
393 static const char *whitelist_ro[] = {
394 CONFIG_BDRV_RO_WHITELIST
395 };
396 const char **p;
397
398 if (!whitelist_rw[0] && !whitelist_ro[0]) {
399 return 1; /* no whitelist, anything goes */
400 }
401
402 for (p = whitelist_rw; *p; p++) {
403 if (!strcmp(drv->format_name, *p)) {
404 return 1;
405 }
406 }
407 if (read_only) {
408 for (p = whitelist_ro; *p; p++) {
409 if (!strcmp(drv->format_name, *p)) {
410 return 1;
411 }
412 }
413 }
414 return 0;
415 }
416
417 BlockDriver *bdrv_find_whitelisted_format(const char *format_name,
418 bool read_only)
419 {
420 BlockDriver *drv = bdrv_find_format(format_name);
421 return drv && bdrv_is_whitelisted(drv, read_only) ? drv : NULL;
422 }
423
424 typedef struct CreateCo {
425 BlockDriver *drv;
426 char *filename;
427 QemuOpts *opts;
428 int ret;
429 Error *err;
430 } CreateCo;
431
432 static void coroutine_fn bdrv_create_co_entry(void *opaque)
433 {
434 Error *local_err = NULL;
435 int ret;
436
437 CreateCo *cco = opaque;
438 assert(cco->drv);
439
440 ret = cco->drv->bdrv_create(cco->filename, cco->opts, &local_err);
441 if (local_err) {
442 error_propagate(&cco->err, local_err);
443 }
444 cco->ret = ret;
445 }
446
447 int bdrv_create(BlockDriver *drv, const char* filename,
448 QemuOpts *opts, Error **errp)
449 {
450 int ret;
451
452 Coroutine *co;
453 CreateCo cco = {
454 .drv = drv,
455 .filename = g_strdup(filename),
456 .opts = opts,
457 .ret = NOT_DONE,
458 .err = NULL,
459 };
460
461 if (!drv->bdrv_create) {
462 error_setg(errp, "Driver '%s' does not support image creation", drv->format_name);
463 ret = -ENOTSUP;
464 goto out;
465 }
466
467 if (qemu_in_coroutine()) {
468 /* Fast-path if already in coroutine context */
469 bdrv_create_co_entry(&cco);
470 } else {
471 co = qemu_coroutine_create(bdrv_create_co_entry);
472 qemu_coroutine_enter(co, &cco);
473 while (cco.ret == NOT_DONE) {
474 aio_poll(qemu_get_aio_context(), true);
475 }
476 }
477
478 ret = cco.ret;
479 if (ret < 0) {
480 if (cco.err) {
481 error_propagate(errp, cco.err);
482 } else {
483 error_setg_errno(errp, -ret, "Could not create image");
484 }
485 }
486
487 out:
488 g_free(cco.filename);
489 return ret;
490 }
491
492 int bdrv_create_file(const char *filename, QemuOpts *opts, Error **errp)
493 {
494 BlockDriver *drv;
495 Error *local_err = NULL;
496 int ret;
497
498 drv = bdrv_find_protocol(filename, true);
499 if (drv == NULL) {
500 error_setg(errp, "Could not find protocol for file '%s'", filename);
501 return -ENOENT;
502 }
503
504 ret = bdrv_create(drv, filename, opts, &local_err);
505 if (local_err) {
506 error_propagate(errp, local_err);
507 }
508 return ret;
509 }
510
511 void bdrv_refresh_limits(BlockDriverState *bs, Error **errp)
512 {
513 BlockDriver *drv = bs->drv;
514 Error *local_err = NULL;
515
516 memset(&bs->bl, 0, sizeof(bs->bl));
517
518 if (!drv) {
519 return;
520 }
521
522 /* Take some limits from the children as a default */
523 if (bs->file) {
524 bdrv_refresh_limits(bs->file, &local_err);
525 if (local_err) {
526 error_propagate(errp, local_err);
527 return;
528 }
529 bs->bl.opt_transfer_length = bs->file->bl.opt_transfer_length;
530 bs->bl.opt_mem_alignment = bs->file->bl.opt_mem_alignment;
531 } else {
532 bs->bl.opt_mem_alignment = 512;
533 }
534
535 if (bs->backing_hd) {
536 bdrv_refresh_limits(bs->backing_hd, &local_err);
537 if (local_err) {
538 error_propagate(errp, local_err);
539 return;
540 }
541 bs->bl.opt_transfer_length =
542 MAX(bs->bl.opt_transfer_length,
543 bs->backing_hd->bl.opt_transfer_length);
544 bs->bl.opt_mem_alignment =
545 MAX(bs->bl.opt_mem_alignment,
546 bs->backing_hd->bl.opt_mem_alignment);
547 }
548
549 /* Then let the driver override it */
550 if (drv->bdrv_refresh_limits) {
551 drv->bdrv_refresh_limits(bs, errp);
552 }
553 }
554
555 /*
556 * Create a uniquely-named empty temporary file.
557 * Return 0 upon success, otherwise a negative errno value.
558 */
559 int get_tmp_filename(char *filename, int size)
560 {
561 #ifdef _WIN32
562 char temp_dir[MAX_PATH];
563 /* GetTempFileName requires that its output buffer (4th param)
564 have length MAX_PATH or greater. */
565 assert(size >= MAX_PATH);
566 return (GetTempPath(MAX_PATH, temp_dir)
567 && GetTempFileName(temp_dir, "qem", 0, filename)
568 ? 0 : -GetLastError());
569 #else
570 int fd;
571 const char *tmpdir;
572 tmpdir = getenv("TMPDIR");
573 if (!tmpdir) {
574 tmpdir = "/var/tmp";
575 }
576 if (snprintf(filename, size, "%s/vl.XXXXXX", tmpdir) >= size) {
577 return -EOVERFLOW;
578 }
579 fd = mkstemp(filename);
580 if (fd < 0) {
581 return -errno;
582 }
583 if (close(fd) != 0) {
584 unlink(filename);
585 return -errno;
586 }
587 return 0;
588 #endif
589 }
590
591 /*
592 * Detect host devices. By convention, /dev/cdrom[N] is always
593 * recognized as a host CDROM.
594 */
595 static BlockDriver *find_hdev_driver(const char *filename)
596 {
597 int score_max = 0, score;
598 BlockDriver *drv = NULL, *d;
599
600 QLIST_FOREACH(d, &bdrv_drivers, list) {
601 if (d->bdrv_probe_device) {
602 score = d->bdrv_probe_device(filename);
603 if (score > score_max) {
604 score_max = score;
605 drv = d;
606 }
607 }
608 }
609
610 return drv;
611 }
612
613 BlockDriver *bdrv_find_protocol(const char *filename,
614 bool allow_protocol_prefix)
615 {
616 BlockDriver *drv1;
617 char protocol[128];
618 int len;
619 const char *p;
620
621 /* TODO Drivers without bdrv_file_open must be specified explicitly */
622
623 /*
624 * XXX(hch): we really should not let host device detection
625 * override an explicit protocol specification, but moving this
626 * later breaks access to device names with colons in them.
627 * Thanks to the brain-dead persistent naming schemes on udev-
628 * based Linux systems those actually are quite common.
629 */
630 drv1 = find_hdev_driver(filename);
631 if (drv1) {
632 return drv1;
633 }
634
635 if (!path_has_protocol(filename) || !allow_protocol_prefix) {
636 return bdrv_find_format("file");
637 }
638
639 p = strchr(filename, ':');
640 assert(p != NULL);
641 len = p - filename;
642 if (len > sizeof(protocol) - 1)
643 len = sizeof(protocol) - 1;
644 memcpy(protocol, filename, len);
645 protocol[len] = '\0';
646 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
647 if (drv1->protocol_name &&
648 !strcmp(drv1->protocol_name, protocol)) {
649 return drv1;
650 }
651 }
652 return NULL;
653 }
654
655 static int find_image_format(BlockDriverState *bs, const char *filename,
656 BlockDriver **pdrv, Error **errp)
657 {
658 int score, score_max;
659 BlockDriver *drv1, *drv;
660 uint8_t buf[2048];
661 int ret = 0;
662
663 /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
664 if (bs->sg || !bdrv_is_inserted(bs) || bdrv_getlength(bs) == 0) {
665 drv = bdrv_find_format("raw");
666 if (!drv) {
667 error_setg(errp, "Could not find raw image format");
668 ret = -ENOENT;
669 }
670 *pdrv = drv;
671 return ret;
672 }
673
674 ret = bdrv_pread(bs, 0, buf, sizeof(buf));
675 if (ret < 0) {
676 error_setg_errno(errp, -ret, "Could not read image for determining its "
677 "format");
678 *pdrv = NULL;
679 return ret;
680 }
681
682 score_max = 0;
683 drv = NULL;
684 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
685 if (drv1->bdrv_probe) {
686 score = drv1->bdrv_probe(buf, ret, filename);
687 if (score > score_max) {
688 score_max = score;
689 drv = drv1;
690 }
691 }
692 }
693 if (!drv) {
694 error_setg(errp, "Could not determine image format: No compatible "
695 "driver found");
696 ret = -ENOENT;
697 }
698 *pdrv = drv;
699 return ret;
700 }
701
702 /**
703 * Set the current 'total_sectors' value
704 */
705 static int refresh_total_sectors(BlockDriverState *bs, int64_t hint)
706 {
707 BlockDriver *drv = bs->drv;
708
709 /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
710 if (bs->sg)
711 return 0;
712
713 /* query actual device if possible, otherwise just trust the hint */
714 if (drv->bdrv_getlength) {
715 int64_t length = drv->bdrv_getlength(bs);
716 if (length < 0) {
717 return length;
718 }
719 hint = DIV_ROUND_UP(length, BDRV_SECTOR_SIZE);
720 }
721
722 bs->total_sectors = hint;
723 return 0;
724 }
725
726 /**
727 * Set open flags for a given discard mode
728 *
729 * Return 0 on success, -1 if the discard mode was invalid.
730 */
731 int bdrv_parse_discard_flags(const char *mode, int *flags)
732 {
733 *flags &= ~BDRV_O_UNMAP;
734
735 if (!strcmp(mode, "off") || !strcmp(mode, "ignore")) {
736 /* do nothing */
737 } else if (!strcmp(mode, "on") || !strcmp(mode, "unmap")) {
738 *flags |= BDRV_O_UNMAP;
739 } else {
740 return -1;
741 }
742
743 return 0;
744 }
745
746 /**
747 * Set open flags for a given cache mode
748 *
749 * Return 0 on success, -1 if the cache mode was invalid.
750 */
751 int bdrv_parse_cache_flags(const char *mode, int *flags)
752 {
753 *flags &= ~BDRV_O_CACHE_MASK;
754
755 if (!strcmp(mode, "off") || !strcmp(mode, "none")) {
756 *flags |= BDRV_O_NOCACHE | BDRV_O_CACHE_WB;
757 } else if (!strcmp(mode, "directsync")) {
758 *flags |= BDRV_O_NOCACHE;
759 } else if (!strcmp(mode, "writeback")) {
760 *flags |= BDRV_O_CACHE_WB;
761 } else if (!strcmp(mode, "unsafe")) {
762 *flags |= BDRV_O_CACHE_WB;
763 *flags |= BDRV_O_NO_FLUSH;
764 } else if (!strcmp(mode, "writethrough")) {
765 /* this is the default */
766 } else {
767 return -1;
768 }
769
770 return 0;
771 }
772
773 /**
774 * The copy-on-read flag is actually a reference count so multiple users may
775 * use the feature without worrying about clobbering its previous state.
776 * Copy-on-read stays enabled until all users have called to disable it.
777 */
778 void bdrv_enable_copy_on_read(BlockDriverState *bs)
779 {
780 bs->copy_on_read++;
781 }
782
783 void bdrv_disable_copy_on_read(BlockDriverState *bs)
784 {
785 assert(bs->copy_on_read > 0);
786 bs->copy_on_read--;
787 }
788
789 /*
790 * Returns the flags that a temporary snapshot should get, based on the
791 * originally requested flags (the originally requested image will have flags
792 * like a backing file)
793 */
794 static int bdrv_temp_snapshot_flags(int flags)
795 {
796 return (flags & ~BDRV_O_SNAPSHOT) | BDRV_O_TEMPORARY;
797 }
798
799 /*
800 * Returns the flags that bs->file should get, based on the given flags for
801 * the parent BDS
802 */
803 static int bdrv_inherited_flags(int flags)
804 {
805 /* Enable protocol handling, disable format probing for bs->file */
806 flags |= BDRV_O_PROTOCOL;
807
808 /* Our block drivers take care to send flushes and respect unmap policy,
809 * so we can enable both unconditionally on lower layers. */
810 flags |= BDRV_O_CACHE_WB | BDRV_O_UNMAP;
811
812 /* Clear flags that only apply to the top layer */
813 flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING | BDRV_O_COPY_ON_READ);
814
815 return flags;
816 }
817
818 /*
819 * Returns the flags that bs->backing_hd should get, based on the given flags
820 * for the parent BDS
821 */
822 static int bdrv_backing_flags(int flags)
823 {
824 /* backing files always opened read-only */
825 flags &= ~(BDRV_O_RDWR | BDRV_O_COPY_ON_READ);
826
827 /* snapshot=on is handled on the top layer */
828 flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_TEMPORARY);
829
830 return flags;
831 }
832
833 static int bdrv_open_flags(BlockDriverState *bs, int flags)
834 {
835 int open_flags = flags | BDRV_O_CACHE_WB;
836
837 /*
838 * Clear flags that are internal to the block layer before opening the
839 * image.
840 */
841 open_flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING | BDRV_O_PROTOCOL);
842
843 /*
844 * Snapshots should be writable.
845 */
846 if (flags & BDRV_O_TEMPORARY) {
847 open_flags |= BDRV_O_RDWR;
848 }
849
850 return open_flags;
851 }
852
853 static void bdrv_assign_node_name(BlockDriverState *bs,
854 const char *node_name,
855 Error **errp)
856 {
857 if (!node_name) {
858 return;
859 }
860
861 /* empty string node name is invalid */
862 if (node_name[0] == '\0') {
863 error_setg(errp, "Empty node name");
864 return;
865 }
866
867 /* takes care of avoiding namespaces collisions */
868 if (bdrv_find(node_name)) {
869 error_setg(errp, "node-name=%s is conflicting with a device id",
870 node_name);
871 return;
872 }
873
874 /* takes care of avoiding duplicates node names */
875 if (bdrv_find_node(node_name)) {
876 error_setg(errp, "Duplicate node name");
877 return;
878 }
879
880 /* copy node name into the bs and insert it into the graph list */
881 pstrcpy(bs->node_name, sizeof(bs->node_name), node_name);
882 QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs, node_list);
883 }
884
885 /*
886 * Common part for opening disk images and files
887 *
888 * Removes all processed options from *options.
889 */
890 static int bdrv_open_common(BlockDriverState *bs, BlockDriverState *file,
891 QDict *options, int flags, BlockDriver *drv, Error **errp)
892 {
893 int ret, open_flags;
894 const char *filename;
895 const char *node_name = NULL;
896 Error *local_err = NULL;
897
898 assert(drv != NULL);
899 assert(bs->file == NULL);
900 assert(options != NULL && bs->options != options);
901
902 if (file != NULL) {
903 filename = file->filename;
904 } else {
905 filename = qdict_get_try_str(options, "filename");
906 }
907
908 if (drv->bdrv_needs_filename && !filename) {
909 error_setg(errp, "The '%s' block driver requires a file name",
910 drv->format_name);
911 return -EINVAL;
912 }
913
914 trace_bdrv_open_common(bs, filename ?: "", flags, drv->format_name);
915
916 node_name = qdict_get_try_str(options, "node-name");
917 bdrv_assign_node_name(bs, node_name, &local_err);
918 if (local_err) {
919 error_propagate(errp, local_err);
920 return -EINVAL;
921 }
922 qdict_del(options, "node-name");
923
924 /* bdrv_open() with directly using a protocol as drv. This layer is already
925 * opened, so assign it to bs (while file becomes a closed BlockDriverState)
926 * and return immediately. */
927 if (file != NULL && drv->bdrv_file_open) {
928 bdrv_swap(file, bs);
929 return 0;
930 }
931
932 bs->open_flags = flags;
933 bs->guest_block_size = 512;
934 bs->request_alignment = 512;
935 bs->zero_beyond_eof = true;
936 open_flags = bdrv_open_flags(bs, flags);
937 bs->read_only = !(open_flags & BDRV_O_RDWR);
938 bs->growable = !!(flags & BDRV_O_PROTOCOL);
939
940 if (use_bdrv_whitelist && !bdrv_is_whitelisted(drv, bs->read_only)) {
941 error_setg(errp,
942 !bs->read_only && bdrv_is_whitelisted(drv, true)
943 ? "Driver '%s' can only be used for read-only devices"
944 : "Driver '%s' is not whitelisted",
945 drv->format_name);
946 return -ENOTSUP;
947 }
948
949 assert(bs->copy_on_read == 0); /* bdrv_new() and bdrv_close() make it so */
950 if (flags & BDRV_O_COPY_ON_READ) {
951 if (!bs->read_only) {
952 bdrv_enable_copy_on_read(bs);
953 } else {
954 error_setg(errp, "Can't use copy-on-read on read-only device");
955 return -EINVAL;
956 }
957 }
958
959 if (filename != NULL) {
960 pstrcpy(bs->filename, sizeof(bs->filename), filename);
961 } else {
962 bs->filename[0] = '\0';
963 }
964
965 bs->drv = drv;
966 bs->opaque = g_malloc0(drv->instance_size);
967
968 bs->enable_write_cache = !!(flags & BDRV_O_CACHE_WB);
969
970 /* Open the image, either directly or using a protocol */
971 if (drv->bdrv_file_open) {
972 assert(file == NULL);
973 assert(!drv->bdrv_needs_filename || filename != NULL);
974 ret = drv->bdrv_file_open(bs, options, open_flags, &local_err);
975 } else {
976 if (file == NULL) {
977 error_setg(errp, "Can't use '%s' as a block driver for the "
978 "protocol level", drv->format_name);
979 ret = -EINVAL;
980 goto free_and_fail;
981 }
982 bs->file = file;
983 ret = drv->bdrv_open(bs, options, open_flags, &local_err);
984 }
985
986 if (ret < 0) {
987 if (local_err) {
988 error_propagate(errp, local_err);
989 } else if (bs->filename[0]) {
990 error_setg_errno(errp, -ret, "Could not open '%s'", bs->filename);
991 } else {
992 error_setg_errno(errp, -ret, "Could not open image");
993 }
994 goto free_and_fail;
995 }
996
997 ret = refresh_total_sectors(bs, bs->total_sectors);
998 if (ret < 0) {
999 error_setg_errno(errp, -ret, "Could not refresh total sector count");
1000 goto free_and_fail;
1001 }
1002
1003 bdrv_refresh_limits(bs, &local_err);
1004 if (local_err) {
1005 error_propagate(errp, local_err);
1006 ret = -EINVAL;
1007 goto free_and_fail;
1008 }
1009
1010 assert(bdrv_opt_mem_align(bs) != 0);
1011 assert((bs->request_alignment != 0) || bs->sg);
1012 return 0;
1013
1014 free_and_fail:
1015 bs->file = NULL;
1016 g_free(bs->opaque);
1017 bs->opaque = NULL;
1018 bs->drv = NULL;
1019 return ret;
1020 }
1021
1022 static QDict *parse_json_filename(const char *filename, Error **errp)
1023 {
1024 QObject *options_obj;
1025 QDict *options;
1026 int ret;
1027
1028 ret = strstart(filename, "json:", &filename);
1029 assert(ret);
1030
1031 options_obj = qobject_from_json(filename);
1032 if (!options_obj) {
1033 error_setg(errp, "Could not parse the JSON options");
1034 return NULL;
1035 }
1036
1037 if (qobject_type(options_obj) != QTYPE_QDICT) {
1038 qobject_decref(options_obj);
1039 error_setg(errp, "Invalid JSON object given");
1040 return NULL;
1041 }
1042
1043 options = qobject_to_qdict(options_obj);
1044 qdict_flatten(options);
1045
1046 return options;
1047 }
1048
1049 /*
1050 * Fills in default options for opening images and converts the legacy
1051 * filename/flags pair to option QDict entries.
1052 */
1053 static int bdrv_fill_options(QDict **options, const char **pfilename, int flags,
1054 BlockDriver *drv, Error **errp)
1055 {
1056 const char *filename = *pfilename;
1057 const char *drvname;
1058 bool protocol = flags & BDRV_O_PROTOCOL;
1059 bool parse_filename = false;
1060 Error *local_err = NULL;
1061
1062 /* Parse json: pseudo-protocol */
1063 if (filename && g_str_has_prefix(filename, "json:")) {
1064 QDict *json_options = parse_json_filename(filename, &local_err);
1065 if (local_err) {
1066 error_propagate(errp, local_err);
1067 return -EINVAL;
1068 }
1069
1070 /* Options given in the filename have lower priority than options
1071 * specified directly */
1072 qdict_join(*options, json_options, false);
1073 QDECREF(json_options);
1074 *pfilename = filename = NULL;
1075 }
1076
1077 /* Fetch the file name from the options QDict if necessary */
1078 if (protocol && filename) {
1079 if (!qdict_haskey(*options, "filename")) {
1080 qdict_put(*options, "filename", qstring_from_str(filename));
1081 parse_filename = true;
1082 } else {
1083 error_setg(errp, "Can't specify 'file' and 'filename' options at "
1084 "the same time");
1085 return -EINVAL;
1086 }
1087 }
1088
1089 /* Find the right block driver */
1090 filename = qdict_get_try_str(*options, "filename");
1091 drvname = qdict_get_try_str(*options, "driver");
1092
1093 if (drv) {
1094 if (drvname) {
1095 error_setg(errp, "Driver specified twice");
1096 return -EINVAL;
1097 }
1098 drvname = drv->format_name;
1099 qdict_put(*options, "driver", qstring_from_str(drvname));
1100 } else {
1101 if (!drvname && protocol) {
1102 if (filename) {
1103 drv = bdrv_find_protocol(filename, parse_filename);
1104 if (!drv) {
1105 error_setg(errp, "Unknown protocol");
1106 return -EINVAL;
1107 }
1108
1109 drvname = drv->format_name;
1110 qdict_put(*options, "driver", qstring_from_str(drvname));
1111 } else {
1112 error_setg(errp, "Must specify either driver or file");
1113 return -EINVAL;
1114 }
1115 } else if (drvname) {
1116 drv = bdrv_find_format(drvname);
1117 if (!drv) {
1118 error_setg(errp, "Unknown driver '%s'", drvname);
1119 return -ENOENT;
1120 }
1121 }
1122 }
1123
1124 assert(drv || !protocol);
1125
1126 /* Driver-specific filename parsing */
1127 if (drv && drv->bdrv_parse_filename && parse_filename) {
1128 drv->bdrv_parse_filename(filename, *options, &local_err);
1129 if (local_err) {
1130 error_propagate(errp, local_err);
1131 return -EINVAL;
1132 }
1133
1134 if (!drv->bdrv_needs_filename) {
1135 qdict_del(*options, "filename");
1136 }
1137 }
1138
1139 return 0;
1140 }
1141
1142 void bdrv_set_backing_hd(BlockDriverState *bs, BlockDriverState *backing_hd)
1143 {
1144
1145 if (bs->backing_hd) {
1146 assert(bs->backing_blocker);
1147 bdrv_op_unblock_all(bs->backing_hd, bs->backing_blocker);
1148 } else if (backing_hd) {
1149 error_setg(&bs->backing_blocker,
1150 "device is used as backing hd of '%s'",
1151 bs->device_name);
1152 }
1153
1154 bs->backing_hd = backing_hd;
1155 if (!backing_hd) {
1156 error_free(bs->backing_blocker);
1157 bs->backing_blocker = NULL;
1158 goto out;
1159 }
1160 bs->open_flags &= ~BDRV_O_NO_BACKING;
1161 pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_hd->filename);
1162 pstrcpy(bs->backing_format, sizeof(bs->backing_format),
1163 backing_hd->drv ? backing_hd->drv->format_name : "");
1164
1165 bdrv_op_block_all(bs->backing_hd, bs->backing_blocker);
1166 /* Otherwise we won't be able to commit due to check in bdrv_commit */
1167 bdrv_op_unblock(bs->backing_hd, BLOCK_OP_TYPE_COMMIT,
1168 bs->backing_blocker);
1169 out:
1170 bdrv_refresh_limits(bs, NULL);
1171 }
1172
1173 /*
1174 * Opens the backing file for a BlockDriverState if not yet open
1175 *
1176 * options is a QDict of options to pass to the block drivers, or NULL for an
1177 * empty set of options. The reference to the QDict is transferred to this
1178 * function (even on failure), so if the caller intends to reuse the dictionary,
1179 * it needs to use QINCREF() before calling bdrv_file_open.
1180 */
1181 int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
1182 {
1183 char *backing_filename = g_malloc0(PATH_MAX);
1184 int ret = 0;
1185 BlockDriver *back_drv = NULL;
1186 BlockDriverState *backing_hd;
1187 Error *local_err = NULL;
1188
1189 if (bs->backing_hd != NULL) {
1190 QDECREF(options);
1191 goto free_exit;
1192 }
1193
1194 /* NULL means an empty set of options */
1195 if (options == NULL) {
1196 options = qdict_new();
1197 }
1198
1199 bs->open_flags &= ~BDRV_O_NO_BACKING;
1200 if (qdict_haskey(options, "file.filename")) {
1201 backing_filename[0] = '\0';
1202 } else if (bs->backing_file[0] == '\0' && qdict_size(options) == 0) {
1203 QDECREF(options);
1204 goto free_exit;
1205 } else {
1206 bdrv_get_full_backing_filename(bs, backing_filename, PATH_MAX);
1207 }
1208
1209 if (!bs->drv || !bs->drv->supports_backing) {
1210 ret = -EINVAL;
1211 error_setg(errp, "Driver doesn't support backing files");
1212 QDECREF(options);
1213 goto free_exit;
1214 }
1215
1216 backing_hd = bdrv_new("", errp);
1217
1218 if (bs->backing_format[0] != '\0') {
1219 back_drv = bdrv_find_format(bs->backing_format);
1220 }
1221
1222 assert(bs->backing_hd == NULL);
1223 ret = bdrv_open(&backing_hd,
1224 *backing_filename ? backing_filename : NULL, NULL, options,
1225 bdrv_backing_flags(bs->open_flags), back_drv, &local_err);
1226 if (ret < 0) {
1227 bdrv_unref(backing_hd);
1228 backing_hd = NULL;
1229 bs->open_flags |= BDRV_O_NO_BACKING;
1230 error_setg(errp, "Could not open backing file: %s",
1231 error_get_pretty(local_err));
1232 error_free(local_err);
1233 goto free_exit;
1234 }
1235 bdrv_set_backing_hd(bs, backing_hd);
1236
1237 free_exit:
1238 g_free(backing_filename);
1239 return ret;
1240 }
1241
1242 /*
1243 * Opens a disk image whose options are given as BlockdevRef in another block
1244 * device's options.
1245 *
1246 * If allow_none is true, no image will be opened if filename is false and no
1247 * BlockdevRef is given. *pbs will remain unchanged and 0 will be returned.
1248 *
1249 * bdrev_key specifies the key for the image's BlockdevRef in the options QDict.
1250 * That QDict has to be flattened; therefore, if the BlockdevRef is a QDict
1251 * itself, all options starting with "${bdref_key}." are considered part of the
1252 * BlockdevRef.
1253 *
1254 * The BlockdevRef will be removed from the options QDict.
1255 *
1256 * To conform with the behavior of bdrv_open(), *pbs has to be NULL.
1257 */
1258 int bdrv_open_image(BlockDriverState **pbs, const char *filename,
1259 QDict *options, const char *bdref_key, int flags,
1260 bool allow_none, Error **errp)
1261 {
1262 QDict *image_options;
1263 int ret;
1264 char *bdref_key_dot;
1265 const char *reference;
1266
1267 assert(pbs);
1268 assert(*pbs == NULL);
1269
1270 bdref_key_dot = g_strdup_printf("%s.", bdref_key);
1271 qdict_extract_subqdict(options, &image_options, bdref_key_dot);
1272 g_free(bdref_key_dot);
1273
1274 reference = qdict_get_try_str(options, bdref_key);
1275 if (!filename && !reference && !qdict_size(image_options)) {
1276 if (allow_none) {
1277 ret = 0;
1278 } else {
1279 error_setg(errp, "A block device must be specified for \"%s\"",
1280 bdref_key);
1281 ret = -EINVAL;
1282 }
1283 QDECREF(image_options);
1284 goto done;
1285 }
1286
1287 ret = bdrv_open(pbs, filename, reference, image_options, flags, NULL, errp);
1288
1289 done:
1290 qdict_del(options, bdref_key);
1291 return ret;
1292 }
1293
1294 int bdrv_append_temp_snapshot(BlockDriverState *bs, int flags, Error **errp)
1295 {
1296 /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
1297 char *tmp_filename = g_malloc0(PATH_MAX + 1);
1298 int64_t total_size;
1299 BlockDriver *bdrv_qcow2;
1300 QemuOpts *opts = NULL;
1301 QDict *snapshot_options;
1302 BlockDriverState *bs_snapshot;
1303 Error *local_err;
1304 int ret;
1305
1306 /* if snapshot, we create a temporary backing file and open it
1307 instead of opening 'filename' directly */
1308
1309 /* Get the required size from the image */
1310 total_size = bdrv_getlength(bs);
1311 if (total_size < 0) {
1312 ret = total_size;
1313 error_setg_errno(errp, -total_size, "Could not get image size");
1314 goto out;
1315 }
1316 total_size &= BDRV_SECTOR_MASK;
1317
1318 /* Create the temporary image */
1319 ret = get_tmp_filename(tmp_filename, PATH_MAX + 1);
1320 if (ret < 0) {
1321 error_setg_errno(errp, -ret, "Could not get temporary filename");
1322 goto out;
1323 }
1324
1325 bdrv_qcow2 = bdrv_find_format("qcow2");
1326 opts = qemu_opts_create(bdrv_qcow2->create_opts, NULL, 0,
1327 &error_abort);
1328 qemu_opt_set_number(opts, BLOCK_OPT_SIZE, total_size);
1329 ret = bdrv_create(bdrv_qcow2, tmp_filename, opts, &local_err);
1330 qemu_opts_del(opts);
1331 if (ret < 0) {
1332 error_setg_errno(errp, -ret, "Could not create temporary overlay "
1333 "'%s': %s", tmp_filename,
1334 error_get_pretty(local_err));
1335 error_free(local_err);
1336 goto out;
1337 }
1338
1339 /* Prepare a new options QDict for the temporary file */
1340 snapshot_options = qdict_new();
1341 qdict_put(snapshot_options, "file.driver",
1342 qstring_from_str("file"));
1343 qdict_put(snapshot_options, "file.filename",
1344 qstring_from_str(tmp_filename));
1345
1346 bs_snapshot = bdrv_new("", &error_abort);
1347
1348 ret = bdrv_open(&bs_snapshot, NULL, NULL, snapshot_options,
1349 flags, bdrv_qcow2, &local_err);
1350 if (ret < 0) {
1351 error_propagate(errp, local_err);
1352 goto out;
1353 }
1354
1355 bdrv_append(bs_snapshot, bs);
1356
1357 out:
1358 g_free(tmp_filename);
1359 return ret;
1360 }
1361
1362 /*
1363 * Opens a disk image (raw, qcow2, vmdk, ...)
1364 *
1365 * options is a QDict of options to pass to the block drivers, or NULL for an
1366 * empty set of options. The reference to the QDict belongs to the block layer
1367 * after the call (even on failure), so if the caller intends to reuse the
1368 * dictionary, it needs to use QINCREF() before calling bdrv_open.
1369 *
1370 * If *pbs is NULL, a new BDS will be created with a pointer to it stored there.
1371 * If it is not NULL, the referenced BDS will be reused.
1372 *
1373 * The reference parameter may be used to specify an existing block device which
1374 * should be opened. If specified, neither options nor a filename may be given,
1375 * nor can an existing BDS be reused (that is, *pbs has to be NULL).
1376 */
1377 int bdrv_open(BlockDriverState **pbs, const char *filename,
1378 const char *reference, QDict *options, int flags,
1379 BlockDriver *drv, Error **errp)
1380 {
1381 int ret;
1382 BlockDriverState *file = NULL, *bs;
1383 const char *drvname;
1384 Error *local_err = NULL;
1385 int snapshot_flags = 0;
1386
1387 assert(pbs);
1388
1389 if (reference) {
1390 bool options_non_empty = options ? qdict_size(options) : false;
1391 QDECREF(options);
1392
1393 if (*pbs) {
1394 error_setg(errp, "Cannot reuse an existing BDS when referencing "
1395 "another block device");
1396 return -EINVAL;
1397 }
1398
1399 if (filename || options_non_empty) {
1400 error_setg(errp, "Cannot reference an existing block device with "
1401 "additional options or a new filename");
1402 return -EINVAL;
1403 }
1404
1405 bs = bdrv_lookup_bs(reference, reference, errp);
1406 if (!bs) {
1407 return -ENODEV;
1408 }
1409 bdrv_ref(bs);
1410 *pbs = bs;
1411 return 0;
1412 }
1413
1414 if (*pbs) {
1415 bs = *pbs;
1416 } else {
1417 bs = bdrv_new("", &error_abort);
1418 }
1419
1420 /* NULL means an empty set of options */
1421 if (options == NULL) {
1422 options = qdict_new();
1423 }
1424
1425 ret = bdrv_fill_options(&options, &filename, flags, drv, &local_err);
1426 if (local_err) {
1427 goto fail;
1428 }
1429
1430 /* Find the right image format driver */
1431 drv = NULL;
1432 drvname = qdict_get_try_str(options, "driver");
1433 if (drvname) {
1434 drv = bdrv_find_format(drvname);
1435 qdict_del(options, "driver");
1436 if (!drv) {
1437 error_setg(errp, "Unknown driver: '%s'", drvname);
1438 ret = -EINVAL;
1439 goto fail;
1440 }
1441 }
1442
1443 assert(drvname || !(flags & BDRV_O_PROTOCOL));
1444 if (drv && !drv->bdrv_file_open) {
1445 /* If the user explicitly wants a format driver here, we'll need to add
1446 * another layer for the protocol in bs->file */
1447 flags &= ~BDRV_O_PROTOCOL;
1448 }
1449
1450 bs->options = options;
1451 options = qdict_clone_shallow(options);
1452
1453 /* Open image file without format layer */
1454 if ((flags & BDRV_O_PROTOCOL) == 0) {
1455 if (flags & BDRV_O_RDWR) {
1456 flags |= BDRV_O_ALLOW_RDWR;
1457 }
1458 if (flags & BDRV_O_SNAPSHOT) {
1459 snapshot_flags = bdrv_temp_snapshot_flags(flags);
1460 flags = bdrv_backing_flags(flags);
1461 }
1462
1463 assert(file == NULL);
1464 ret = bdrv_open_image(&file, filename, options, "file",
1465 bdrv_inherited_flags(flags),
1466 true, &local_err);
1467 if (ret < 0) {
1468 goto fail;
1469 }
1470 }
1471
1472 /* Image format probing */
1473 if (!drv && file) {
1474 ret = find_image_format(file, filename, &drv, &local_err);
1475 if (ret < 0) {
1476 goto fail;
1477 }
1478 } else if (!drv) {
1479 error_setg(errp, "Must specify either driver or file");
1480 ret = -EINVAL;
1481 goto fail;
1482 }
1483
1484 /* Open the image */
1485 ret = bdrv_open_common(bs, file, options, flags, drv, &local_err);
1486 if (ret < 0) {
1487 goto fail;
1488 }
1489
1490 if (file && (bs->file != file)) {
1491 bdrv_unref(file);
1492 file = NULL;
1493 }
1494
1495 /* If there is a backing file, use it */
1496 if ((flags & BDRV_O_NO_BACKING) == 0) {
1497 QDict *backing_options;
1498
1499 qdict_extract_subqdict(options, &backing_options, "backing.");
1500 ret = bdrv_open_backing_file(bs, backing_options, &local_err);
1501 if (ret < 0) {
1502 goto close_and_fail;
1503 }
1504 }
1505
1506 /* For snapshot=on, create a temporary qcow2 overlay. bs points to the
1507 * temporary snapshot afterwards. */
1508 if (snapshot_flags) {
1509 ret = bdrv_append_temp_snapshot(bs, snapshot_flags, &local_err);
1510 if (local_err) {
1511 goto close_and_fail;
1512 }
1513 }
1514
1515 /* Check if any unknown options were used */
1516 if (options && (qdict_size(options) != 0)) {
1517 const QDictEntry *entry = qdict_first(options);
1518 if (flags & BDRV_O_PROTOCOL) {
1519 error_setg(errp, "Block protocol '%s' doesn't support the option "
1520 "'%s'", drv->format_name, entry->key);
1521 } else {
1522 error_setg(errp, "Block format '%s' used by device '%s' doesn't "
1523 "support the option '%s'", drv->format_name,
1524 bs->device_name, entry->key);
1525 }
1526
1527 ret = -EINVAL;
1528 goto close_and_fail;
1529 }
1530
1531 if (!bdrv_key_required(bs)) {
1532 bdrv_dev_change_media_cb(bs, true);
1533 } else if (!runstate_check(RUN_STATE_PRELAUNCH)
1534 && !runstate_check(RUN_STATE_INMIGRATE)
1535 && !runstate_check(RUN_STATE_PAUSED)) { /* HACK */
1536 error_setg(errp,
1537 "Guest must be stopped for opening of encrypted image");
1538 ret = -EBUSY;
1539 goto close_and_fail;
1540 }
1541
1542 QDECREF(options);
1543 *pbs = bs;
1544 return 0;
1545
1546 fail:
1547 if (file != NULL) {
1548 bdrv_unref(file);
1549 }
1550 QDECREF(bs->options);
1551 QDECREF(options);
1552 bs->options = NULL;
1553 if (!*pbs) {
1554 /* If *pbs is NULL, a new BDS has been created in this function and
1555 needs to be freed now. Otherwise, it does not need to be closed,
1556 since it has not really been opened yet. */
1557 bdrv_unref(bs);
1558 }
1559 if (local_err) {
1560 error_propagate(errp, local_err);
1561 }
1562 return ret;
1563
1564 close_and_fail:
1565 /* See fail path, but now the BDS has to be always closed */
1566 if (*pbs) {
1567 bdrv_close(bs);
1568 } else {
1569 bdrv_unref(bs);
1570 }
1571 QDECREF(options);
1572 if (local_err) {
1573 error_propagate(errp, local_err);
1574 }
1575 return ret;
1576 }
1577
1578 typedef struct BlockReopenQueueEntry {
1579 bool prepared;
1580 BDRVReopenState state;
1581 QSIMPLEQ_ENTRY(BlockReopenQueueEntry) entry;
1582 } BlockReopenQueueEntry;
1583
1584 /*
1585 * Adds a BlockDriverState to a simple queue for an atomic, transactional
1586 * reopen of multiple devices.
1587 *
1588 * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
1589 * already performed, or alternatively may be NULL a new BlockReopenQueue will
1590 * be created and initialized. This newly created BlockReopenQueue should be
1591 * passed back in for subsequent calls that are intended to be of the same
1592 * atomic 'set'.
1593 *
1594 * bs is the BlockDriverState to add to the reopen queue.
1595 *
1596 * flags contains the open flags for the associated bs
1597 *
1598 * returns a pointer to bs_queue, which is either the newly allocated
1599 * bs_queue, or the existing bs_queue being used.
1600 *
1601 */
1602 BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue,
1603 BlockDriverState *bs, int flags)
1604 {
1605 assert(bs != NULL);
1606
1607 BlockReopenQueueEntry *bs_entry;
1608 if (bs_queue == NULL) {
1609 bs_queue = g_new0(BlockReopenQueue, 1);
1610 QSIMPLEQ_INIT(bs_queue);
1611 }
1612
1613 /* bdrv_open() masks this flag out */
1614 flags &= ~BDRV_O_PROTOCOL;
1615
1616 if (bs->file) {
1617 bdrv_reopen_queue(bs_queue, bs->file, bdrv_inherited_flags(flags));
1618 }
1619
1620 bs_entry = g_new0(BlockReopenQueueEntry, 1);
1621 QSIMPLEQ_INSERT_TAIL(bs_queue, bs_entry, entry);
1622
1623 bs_entry->state.bs = bs;
1624 bs_entry->state.flags = flags;
1625
1626 return bs_queue;
1627 }
1628
1629 /*
1630 * Reopen multiple BlockDriverStates atomically & transactionally.
1631 *
1632 * The queue passed in (bs_queue) must have been built up previous
1633 * via bdrv_reopen_queue().
1634 *
1635 * Reopens all BDS specified in the queue, with the appropriate
1636 * flags. All devices are prepared for reopen, and failure of any
1637 * device will cause all device changes to be abandonded, and intermediate
1638 * data cleaned up.
1639 *
1640 * If all devices prepare successfully, then the changes are committed
1641 * to all devices.
1642 *
1643 */
1644 int bdrv_reopen_multiple(BlockReopenQueue *bs_queue, Error **errp)
1645 {
1646 int ret = -1;
1647 BlockReopenQueueEntry *bs_entry, *next;
1648 Error *local_err = NULL;
1649
1650 assert(bs_queue != NULL);
1651
1652 bdrv_drain_all();
1653
1654 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1655 if (bdrv_reopen_prepare(&bs_entry->state, bs_queue, &local_err)) {
1656 error_propagate(errp, local_err);
1657 goto cleanup;
1658 }
1659 bs_entry->prepared = true;
1660 }
1661
1662 /* If we reach this point, we have success and just need to apply the
1663 * changes
1664 */
1665 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1666 bdrv_reopen_commit(&bs_entry->state);
1667 }
1668
1669 ret = 0;
1670
1671 cleanup:
1672 QSIMPLEQ_FOREACH_SAFE(bs_entry, bs_queue, entry, next) {
1673 if (ret && bs_entry->prepared) {
1674 bdrv_reopen_abort(&bs_entry->state);
1675 }
1676 g_free(bs_entry);
1677 }
1678 g_free(bs_queue);
1679 return ret;
1680 }
1681
1682
1683 /* Reopen a single BlockDriverState with the specified flags. */
1684 int bdrv_reopen(BlockDriverState *bs, int bdrv_flags, Error **errp)
1685 {
1686 int ret = -1;
1687 Error *local_err = NULL;
1688 BlockReopenQueue *queue = bdrv_reopen_queue(NULL, bs, bdrv_flags);
1689
1690 ret = bdrv_reopen_multiple(queue, &local_err);
1691 if (local_err != NULL) {
1692 error_propagate(errp, local_err);
1693 }
1694 return ret;
1695 }
1696
1697
1698 /*
1699 * Prepares a BlockDriverState for reopen. All changes are staged in the
1700 * 'opaque' field of the BDRVReopenState, which is used and allocated by
1701 * the block driver layer .bdrv_reopen_prepare()
1702 *
1703 * bs is the BlockDriverState to reopen
1704 * flags are the new open flags
1705 * queue is the reopen queue
1706 *
1707 * Returns 0 on success, non-zero on error. On error errp will be set
1708 * as well.
1709 *
1710 * On failure, bdrv_reopen_abort() will be called to clean up any data.
1711 * It is the responsibility of the caller to then call the abort() or
1712 * commit() for any other BDS that have been left in a prepare() state
1713 *
1714 */
1715 int bdrv_reopen_prepare(BDRVReopenState *reopen_state, BlockReopenQueue *queue,
1716 Error **errp)
1717 {
1718 int ret = -1;
1719 Error *local_err = NULL;
1720 BlockDriver *drv;
1721
1722 assert(reopen_state != NULL);
1723 assert(reopen_state->bs->drv != NULL);
1724 drv = reopen_state->bs->drv;
1725
1726 /* if we are to stay read-only, do not allow permission change
1727 * to r/w */
1728 if (!(reopen_state->bs->open_flags & BDRV_O_ALLOW_RDWR) &&
1729 reopen_state->flags & BDRV_O_RDWR) {
1730 error_set(errp, QERR_DEVICE_IS_READ_ONLY,
1731 reopen_state->bs->device_name);
1732 goto error;
1733 }
1734
1735
1736 ret = bdrv_flush(reopen_state->bs);
1737 if (ret) {
1738 error_set(errp, ERROR_CLASS_GENERIC_ERROR, "Error (%s) flushing drive",
1739 strerror(-ret));
1740 goto error;
1741 }
1742
1743 if (drv->bdrv_reopen_prepare) {
1744 ret = drv->bdrv_reopen_prepare(reopen_state, queue, &local_err);
1745 if (ret) {
1746 if (local_err != NULL) {
1747 error_propagate(errp, local_err);
1748 } else {
1749 error_setg(errp, "failed while preparing to reopen image '%s'",
1750 reopen_state->bs->filename);
1751 }
1752 goto error;
1753 }
1754 } else {
1755 /* It is currently mandatory to have a bdrv_reopen_prepare()
1756 * handler for each supported drv. */
1757 error_set(errp, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED,
1758 drv->format_name, reopen_state->bs->device_name,
1759 "reopening of file");
1760 ret = -1;
1761 goto error;
1762 }
1763
1764 ret = 0;
1765
1766 error:
1767 return ret;
1768 }
1769
1770 /*
1771 * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1772 * makes them final by swapping the staging BlockDriverState contents into
1773 * the active BlockDriverState contents.
1774 */
1775 void bdrv_reopen_commit(BDRVReopenState *reopen_state)
1776 {
1777 BlockDriver *drv;
1778
1779 assert(reopen_state != NULL);
1780 drv = reopen_state->bs->drv;
1781 assert(drv != NULL);
1782
1783 /* If there are any driver level actions to take */
1784 if (drv->bdrv_reopen_commit) {
1785 drv->bdrv_reopen_commit(reopen_state);
1786 }
1787
1788 /* set BDS specific flags now */
1789 reopen_state->bs->open_flags = reopen_state->flags;
1790 reopen_state->bs->enable_write_cache = !!(reopen_state->flags &
1791 BDRV_O_CACHE_WB);
1792 reopen_state->bs->read_only = !(reopen_state->flags & BDRV_O_RDWR);
1793
1794 bdrv_refresh_limits(reopen_state->bs, NULL);
1795 }
1796
1797 /*
1798 * Abort the reopen, and delete and free the staged changes in
1799 * reopen_state
1800 */
1801 void bdrv_reopen_abort(BDRVReopenState *reopen_state)
1802 {
1803 BlockDriver *drv;
1804
1805 assert(reopen_state != NULL);
1806 drv = reopen_state->bs->drv;
1807 assert(drv != NULL);
1808
1809 if (drv->bdrv_reopen_abort) {
1810 drv->bdrv_reopen_abort(reopen_state);
1811 }
1812 }
1813
1814
1815 void bdrv_close(BlockDriverState *bs)
1816 {
1817 if (bs->job) {
1818 block_job_cancel_sync(bs->job);
1819 }
1820 bdrv_drain_all(); /* complete I/O */
1821 bdrv_flush(bs);
1822 bdrv_drain_all(); /* in case flush left pending I/O */
1823 notifier_list_notify(&bs->close_notifiers, bs);
1824
1825 if (bs->drv) {
1826 if (bs->backing_hd) {
1827 BlockDriverState *backing_hd = bs->backing_hd;
1828 bdrv_set_backing_hd(bs, NULL);
1829 bdrv_unref(backing_hd);
1830 }
1831 bs->drv->bdrv_close(bs);
1832 g_free(bs->opaque);
1833 bs->opaque = NULL;
1834 bs->drv = NULL;
1835 bs->copy_on_read = 0;
1836 bs->backing_file[0] = '\0';
1837 bs->backing_format[0] = '\0';
1838 bs->total_sectors = 0;
1839 bs->encrypted = 0;
1840 bs->valid_key = 0;
1841 bs->sg = 0;
1842 bs->growable = 0;
1843 bs->zero_beyond_eof = false;
1844 QDECREF(bs->options);
1845 bs->options = NULL;
1846
1847 if (bs->file != NULL) {
1848 bdrv_unref(bs->file);
1849 bs->file = NULL;
1850 }
1851 }
1852
1853 bdrv_dev_change_media_cb(bs, false);
1854
1855 /*throttling disk I/O limits*/
1856 if (bs->io_limits_enabled) {
1857 bdrv_io_limits_disable(bs);
1858 }
1859 }
1860
1861 void bdrv_close_all(void)
1862 {
1863 BlockDriverState *bs;
1864
1865 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1866 AioContext *aio_context = bdrv_get_aio_context(bs);
1867
1868 aio_context_acquire(aio_context);
1869 bdrv_close(bs);
1870 aio_context_release(aio_context);
1871 }
1872 }
1873
1874 /* Check if any requests are in-flight (including throttled requests) */
1875 static bool bdrv_requests_pending(BlockDriverState *bs)
1876 {
1877 if (!QLIST_EMPTY(&bs->tracked_requests)) {
1878 return true;
1879 }
1880 if (!qemu_co_queue_empty(&bs->throttled_reqs[0])) {
1881 return true;
1882 }
1883 if (!qemu_co_queue_empty(&bs->throttled_reqs[1])) {
1884 return true;
1885 }
1886 if (bs->file && bdrv_requests_pending(bs->file)) {
1887 return true;
1888 }
1889 if (bs->backing_hd && bdrv_requests_pending(bs->backing_hd)) {
1890 return true;
1891 }
1892 return false;
1893 }
1894
1895 /*
1896 * Wait for pending requests to complete across all BlockDriverStates
1897 *
1898 * This function does not flush data to disk, use bdrv_flush_all() for that
1899 * after calling this function.
1900 *
1901 * Note that completion of an asynchronous I/O operation can trigger any
1902 * number of other I/O operations on other devices---for example a coroutine
1903 * can be arbitrarily complex and a constant flow of I/O can come until the
1904 * coroutine is complete. Because of this, it is not possible to have a
1905 * function to drain a single device's I/O queue.
1906 */
1907 void bdrv_drain_all(void)
1908 {
1909 /* Always run first iteration so any pending completion BHs run */
1910 bool busy = true;
1911 BlockDriverState *bs;
1912
1913 while (busy) {
1914 busy = false;
1915
1916 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1917 AioContext *aio_context = bdrv_get_aio_context(bs);
1918 bool bs_busy;
1919
1920 aio_context_acquire(aio_context);
1921 bdrv_flush_io_queue(bs);
1922 bdrv_start_throttled_reqs(bs);
1923 bs_busy = bdrv_requests_pending(bs);
1924 bs_busy |= aio_poll(aio_context, bs_busy);
1925 aio_context_release(aio_context);
1926
1927 busy |= bs_busy;
1928 }
1929 }
1930 }
1931
1932 /* make a BlockDriverState anonymous by removing from bdrv_state and
1933 * graph_bdrv_state list.
1934 Also, NULL terminate the device_name to prevent double remove */
1935 void bdrv_make_anon(BlockDriverState *bs)
1936 {
1937 if (bs->device_name[0] != '\0') {
1938 QTAILQ_REMOVE(&bdrv_states, bs, device_list);
1939 }
1940 bs->device_name[0] = '\0';
1941 if (bs->node_name[0] != '\0') {
1942 QTAILQ_REMOVE(&graph_bdrv_states, bs, node_list);
1943 }
1944 bs->node_name[0] = '\0';
1945 }
1946
1947 static void bdrv_rebind(BlockDriverState *bs)
1948 {
1949 if (bs->drv && bs->drv->bdrv_rebind) {
1950 bs->drv->bdrv_rebind(bs);
1951 }
1952 }
1953
1954 static void bdrv_move_feature_fields(BlockDriverState *bs_dest,
1955 BlockDriverState *bs_src)
1956 {
1957 /* move some fields that need to stay attached to the device */
1958
1959 /* dev info */
1960 bs_dest->dev_ops = bs_src->dev_ops;
1961 bs_dest->dev_opaque = bs_src->dev_opaque;
1962 bs_dest->dev = bs_src->dev;
1963 bs_dest->guest_block_size = bs_src->guest_block_size;
1964 bs_dest->copy_on_read = bs_src->copy_on_read;
1965
1966 bs_dest->enable_write_cache = bs_src->enable_write_cache;
1967
1968 /* i/o throttled req */
1969 memcpy(&bs_dest->throttle_state,
1970 &bs_src->throttle_state,
1971 sizeof(ThrottleState));
1972 bs_dest->throttled_reqs[0] = bs_src->throttled_reqs[0];
1973 bs_dest->throttled_reqs[1] = bs_src->throttled_reqs[1];
1974 bs_dest->io_limits_enabled = bs_src->io_limits_enabled;
1975
1976 /* r/w error */
1977 bs_dest->on_read_error = bs_src->on_read_error;
1978 bs_dest->on_write_error = bs_src->on_write_error;
1979
1980 /* i/o status */
1981 bs_dest->iostatus_enabled = bs_src->iostatus_enabled;
1982 bs_dest->iostatus = bs_src->iostatus;
1983
1984 /* dirty bitmap */
1985 bs_dest->dirty_bitmaps = bs_src->dirty_bitmaps;
1986
1987 /* reference count */
1988 bs_dest->refcnt = bs_src->refcnt;
1989
1990 /* job */
1991 bs_dest->job = bs_src->job;
1992
1993 /* keep the same entry in bdrv_states */
1994 pstrcpy(bs_dest->device_name, sizeof(bs_dest->device_name),
1995 bs_src->device_name);
1996 bs_dest->device_list = bs_src->device_list;
1997 memcpy(bs_dest->op_blockers, bs_src->op_blockers,
1998 sizeof(bs_dest->op_blockers));
1999 }
2000
2001 /*
2002 * Swap bs contents for two image chains while they are live,
2003 * while keeping required fields on the BlockDriverState that is
2004 * actually attached to a device.
2005 *
2006 * This will modify the BlockDriverState fields, and swap contents
2007 * between bs_new and bs_old. Both bs_new and bs_old are modified.
2008 *
2009 * bs_new is required to be anonymous.
2010 *
2011 * This function does not create any image files.
2012 */
2013 void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old)
2014 {
2015 BlockDriverState tmp;
2016
2017 /* The code needs to swap the node_name but simply swapping node_list won't
2018 * work so first remove the nodes from the graph list, do the swap then
2019 * insert them back if needed.
2020 */
2021 if (bs_new->node_name[0] != '\0') {
2022 QTAILQ_REMOVE(&graph_bdrv_states, bs_new, node_list);
2023 }
2024 if (bs_old->node_name[0] != '\0') {
2025 QTAILQ_REMOVE(&graph_bdrv_states, bs_old, node_list);
2026 }
2027
2028 /* bs_new must be anonymous and shouldn't have anything fancy enabled */
2029 assert(bs_new->device_name[0] == '\0');
2030 assert(QLIST_EMPTY(&bs_new->dirty_bitmaps));
2031 assert(bs_new->job == NULL);
2032 assert(bs_new->dev == NULL);
2033 assert(bs_new->io_limits_enabled == false);
2034 assert(!throttle_have_timer(&bs_new->throttle_state));
2035
2036 tmp = *bs_new;
2037 *bs_new = *bs_old;
2038 *bs_old = tmp;
2039
2040 /* there are some fields that should not be swapped, move them back */
2041 bdrv_move_feature_fields(&tmp, bs_old);
2042 bdrv_move_feature_fields(bs_old, bs_new);
2043 bdrv_move_feature_fields(bs_new, &tmp);
2044
2045 /* bs_new shouldn't be in bdrv_states even after the swap! */
2046 assert(bs_new->device_name[0] == '\0');
2047
2048 /* Check a few fields that should remain attached to the device */
2049 assert(bs_new->dev == NULL);
2050 assert(bs_new->job == NULL);
2051 assert(bs_new->io_limits_enabled == false);
2052 assert(!throttle_have_timer(&bs_new->throttle_state));
2053
2054 /* insert the nodes back into the graph node list if needed */
2055 if (bs_new->node_name[0] != '\0') {
2056 QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs_new, node_list);
2057 }
2058 if (bs_old->node_name[0] != '\0') {
2059 QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs_old, node_list);
2060 }
2061
2062 bdrv_rebind(bs_new);
2063 bdrv_rebind(bs_old);
2064 }
2065
2066 /*
2067 * Add new bs contents at the top of an image chain while the chain is
2068 * live, while keeping required fields on the top layer.
2069 *
2070 * This will modify the BlockDriverState fields, and swap contents
2071 * between bs_new and bs_top. Both bs_new and bs_top are modified.
2072 *
2073 * bs_new is required to be anonymous.
2074 *
2075 * This function does not create any image files.
2076 */
2077 void bdrv_append(BlockDriverState *bs_new, BlockDriverState *bs_top)
2078 {
2079 bdrv_swap(bs_new, bs_top);
2080
2081 /* The contents of 'tmp' will become bs_top, as we are
2082 * swapping bs_new and bs_top contents. */
2083 bdrv_set_backing_hd(bs_top, bs_new);
2084 }
2085
2086 static void bdrv_delete(BlockDriverState *bs)
2087 {
2088 assert(!bs->dev);
2089 assert(!bs->job);
2090 assert(bdrv_op_blocker_is_empty(bs));
2091 assert(!bs->refcnt);
2092 assert(QLIST_EMPTY(&bs->dirty_bitmaps));
2093
2094 bdrv_close(bs);
2095
2096 /* remove from list, if necessary */
2097 bdrv_make_anon(bs);
2098
2099 g_free(bs);
2100 }
2101
2102 int bdrv_attach_dev(BlockDriverState *bs, void *dev)
2103 /* TODO change to DeviceState *dev when all users are qdevified */
2104 {
2105 if (bs->dev) {
2106 return -EBUSY;
2107 }
2108 bs->dev = dev;
2109 bdrv_iostatus_reset(bs);
2110 return 0;
2111 }
2112
2113 /* TODO qdevified devices don't use this, remove when devices are qdevified */
2114 void bdrv_attach_dev_nofail(BlockDriverState *bs, void *dev)
2115 {
2116 if (bdrv_attach_dev(bs, dev) < 0) {
2117 abort();
2118 }
2119 }
2120
2121 void bdrv_detach_dev(BlockDriverState *bs, void *dev)
2122 /* TODO change to DeviceState *dev when all users are qdevified */
2123 {
2124 assert(bs->dev == dev);
2125 bs->dev = NULL;
2126 bs->dev_ops = NULL;
2127 bs->dev_opaque = NULL;
2128 bs->guest_block_size = 512;
2129 }
2130
2131 /* TODO change to return DeviceState * when all users are qdevified */
2132 void *bdrv_get_attached_dev(BlockDriverState *bs)
2133 {
2134 return bs->dev;
2135 }
2136
2137 void bdrv_set_dev_ops(BlockDriverState *bs, const BlockDevOps *ops,
2138 void *opaque)
2139 {
2140 bs->dev_ops = ops;
2141 bs->dev_opaque = opaque;
2142 }
2143
2144 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load)
2145 {
2146 if (bs->dev_ops && bs->dev_ops->change_media_cb) {
2147 bool tray_was_closed = !bdrv_dev_is_tray_open(bs);
2148 bs->dev_ops->change_media_cb(bs->dev_opaque, load);
2149 if (tray_was_closed) {
2150 /* tray open */
2151 qapi_event_send_device_tray_moved(bdrv_get_device_name(bs),
2152 true, &error_abort);
2153 }
2154 if (load) {
2155 /* tray close */
2156 qapi_event_send_device_tray_moved(bdrv_get_device_name(bs),
2157 false, &error_abort);
2158 }
2159 }
2160 }
2161
2162 bool bdrv_dev_has_removable_media(BlockDriverState *bs)
2163 {
2164 return !bs->dev || (bs->dev_ops && bs->dev_ops->change_media_cb);
2165 }
2166
2167 void bdrv_dev_eject_request(BlockDriverState *bs, bool force)
2168 {
2169 if (bs->dev_ops && bs->dev_ops->eject_request_cb) {
2170 bs->dev_ops->eject_request_cb(bs->dev_opaque, force);
2171 }
2172 }
2173
2174 bool bdrv_dev_is_tray_open(BlockDriverState *bs)
2175 {
2176 if (bs->dev_ops && bs->dev_ops->is_tray_open) {
2177 return bs->dev_ops->is_tray_open(bs->dev_opaque);
2178 }
2179 return false;
2180 }
2181
2182 static void bdrv_dev_resize_cb(BlockDriverState *bs)
2183 {
2184 if (bs->dev_ops && bs->dev_ops->resize_cb) {
2185 bs->dev_ops->resize_cb(bs->dev_opaque);
2186 }
2187 }
2188
2189 bool bdrv_dev_is_medium_locked(BlockDriverState *bs)
2190 {
2191 if (bs->dev_ops && bs->dev_ops->is_medium_locked) {
2192 return bs->dev_ops->is_medium_locked(bs->dev_opaque);
2193 }
2194 return false;
2195 }
2196
2197 /*
2198 * Run consistency checks on an image
2199 *
2200 * Returns 0 if the check could be completed (it doesn't mean that the image is
2201 * free of errors) or -errno when an internal error occurred. The results of the
2202 * check are stored in res.
2203 */
2204 int bdrv_check(BlockDriverState *bs, BdrvCheckResult *res, BdrvCheckMode fix)
2205 {
2206 if (bs->drv->bdrv_check == NULL) {
2207 return -ENOTSUP;
2208 }
2209
2210 memset(res, 0, sizeof(*res));
2211 return bs->drv->bdrv_check(bs, res, fix);
2212 }
2213
2214 #define COMMIT_BUF_SECTORS 2048
2215
2216 /* commit COW file into the raw image */
2217 int bdrv_commit(BlockDriverState *bs)
2218 {
2219 BlockDriver *drv = bs->drv;
2220 int64_t sector, total_sectors, length, backing_length;
2221 int n, ro, open_flags;
2222 int ret = 0;
2223 uint8_t *buf = NULL;
2224 char filename[PATH_MAX];
2225
2226 if (!drv)
2227 return -ENOMEDIUM;
2228
2229 if (!bs->backing_hd) {
2230 return -ENOTSUP;
2231 }
2232
2233 if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_COMMIT, NULL) ||
2234 bdrv_op_is_blocked(bs->backing_hd, BLOCK_OP_TYPE_COMMIT, NULL)) {
2235 return -EBUSY;
2236 }
2237
2238 ro = bs->backing_hd->read_only;
2239 /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
2240 pstrcpy(filename, sizeof(filename), bs->backing_hd->filename);
2241 open_flags = bs->backing_hd->open_flags;
2242
2243 if (ro) {
2244 if (bdrv_reopen(bs->backing_hd, open_flags | BDRV_O_RDWR, NULL)) {
2245 return -EACCES;
2246 }
2247 }
2248
2249 length = bdrv_getlength(bs);
2250 if (length < 0) {
2251 ret = length;
2252 goto ro_cleanup;
2253 }
2254
2255 backing_length = bdrv_getlength(bs->backing_hd);
2256 if (backing_length < 0) {
2257 ret = backing_length;
2258 goto ro_cleanup;
2259 }
2260
2261 /* If our top snapshot is larger than the backing file image,
2262 * grow the backing file image if possible. If not possible,
2263 * we must return an error */
2264 if (length > backing_length) {
2265 ret = bdrv_truncate(bs->backing_hd, length);
2266 if (ret < 0) {
2267 goto ro_cleanup;
2268 }
2269 }
2270
2271 total_sectors = length >> BDRV_SECTOR_BITS;
2272 buf = g_malloc(COMMIT_BUF_SECTORS * BDRV_SECTOR_SIZE);
2273
2274 for (sector = 0; sector < total_sectors; sector += n) {
2275 ret = bdrv_is_allocated(bs, sector, COMMIT_BUF_SECTORS, &n);
2276 if (ret < 0) {
2277 goto ro_cleanup;
2278 }
2279 if (ret) {
2280 ret = bdrv_read(bs, sector, buf, n);
2281 if (ret < 0) {
2282 goto ro_cleanup;
2283 }
2284
2285 ret = bdrv_write(bs->backing_hd, sector, buf, n);
2286 if (ret < 0) {
2287 goto ro_cleanup;
2288 }
2289 }
2290 }
2291
2292 if (drv->bdrv_make_empty) {
2293 ret = drv->bdrv_make_empty(bs);
2294 if (ret < 0) {
2295 goto ro_cleanup;
2296 }
2297 bdrv_flush(bs);
2298 }
2299
2300 /*
2301 * Make sure all data we wrote to the backing device is actually
2302 * stable on disk.
2303 */
2304 if (bs->backing_hd) {
2305 bdrv_flush(bs->backing_hd);
2306 }
2307
2308 ret = 0;
2309 ro_cleanup:
2310 g_free(buf);
2311
2312 if (ro) {
2313 /* ignoring error return here */
2314 bdrv_reopen(bs->backing_hd, open_flags & ~BDRV_O_RDWR, NULL);
2315 }
2316
2317 return ret;
2318 }
2319
2320 int bdrv_commit_all(void)
2321 {
2322 BlockDriverState *bs;
2323
2324 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
2325 AioContext *aio_context = bdrv_get_aio_context(bs);
2326
2327 aio_context_acquire(aio_context);
2328 if (bs->drv && bs->backing_hd) {
2329 int ret = bdrv_commit(bs);
2330 if (ret < 0) {
2331 aio_context_release(aio_context);
2332 return ret;
2333 }
2334 }
2335 aio_context_release(aio_context);
2336 }
2337 return 0;
2338 }
2339
2340 /**
2341 * Remove an active request from the tracked requests list
2342 *
2343 * This function should be called when a tracked request is completing.
2344 */
2345 static void tracked_request_end(BdrvTrackedRequest *req)
2346 {
2347 if (req->serialising) {
2348 req->bs->serialising_in_flight--;
2349 }
2350
2351 QLIST_REMOVE(req, list);
2352 qemu_co_queue_restart_all(&req->wait_queue);
2353 }
2354
2355 /**
2356 * Add an active request to the tracked requests list
2357 */
2358 static void tracked_request_begin(BdrvTrackedRequest *req,
2359 BlockDriverState *bs,
2360 int64_t offset,
2361 unsigned int bytes, bool is_write)
2362 {
2363 *req = (BdrvTrackedRequest){
2364 .bs = bs,
2365 .offset = offset,
2366 .bytes = bytes,
2367 .is_write = is_write,
2368 .co = qemu_coroutine_self(),
2369 .serialising = false,
2370 .overlap_offset = offset,
2371 .overlap_bytes = bytes,
2372 };
2373
2374 qemu_co_queue_init(&req->wait_queue);
2375
2376 QLIST_INSERT_HEAD(&bs->tracked_requests, req, list);
2377 }
2378
2379 static void mark_request_serialising(BdrvTrackedRequest *req, uint64_t align)
2380 {
2381 int64_t overlap_offset = req->offset & ~(align - 1);
2382 unsigned int overlap_bytes = ROUND_UP(req->offset + req->bytes, align)
2383 - overlap_offset;
2384
2385 if (!req->serialising) {
2386 req->bs->serialising_in_flight++;
2387 req->serialising = true;
2388 }
2389
2390 req->overlap_offset = MIN(req->overlap_offset, overlap_offset);
2391 req->overlap_bytes = MAX(req->overlap_bytes, overlap_bytes);
2392 }
2393
2394 /**
2395 * Round a region to cluster boundaries
2396 */
2397 void bdrv_round_to_clusters(BlockDriverState *bs,
2398 int64_t sector_num, int nb_sectors,
2399 int64_t *cluster_sector_num,
2400 int *cluster_nb_sectors)
2401 {
2402 BlockDriverInfo bdi;
2403
2404 if (bdrv_get_info(bs, &bdi) < 0 || bdi.cluster_size == 0) {
2405 *cluster_sector_num = sector_num;
2406 *cluster_nb_sectors = nb_sectors;
2407 } else {
2408 int64_t c = bdi.cluster_size / BDRV_SECTOR_SIZE;
2409 *cluster_sector_num = QEMU_ALIGN_DOWN(sector_num, c);
2410 *cluster_nb_sectors = QEMU_ALIGN_UP(sector_num - *cluster_sector_num +
2411 nb_sectors, c);
2412 }
2413 }
2414
2415 static int bdrv_get_cluster_size(BlockDriverState *bs)
2416 {
2417 BlockDriverInfo bdi;
2418 int ret;
2419
2420 ret = bdrv_get_info(bs, &bdi);
2421 if (ret < 0 || bdi.cluster_size == 0) {
2422 return bs->request_alignment;
2423 } else {
2424 return bdi.cluster_size;
2425 }
2426 }
2427
2428 static bool tracked_request_overlaps(BdrvTrackedRequest *req,
2429 int64_t offset, unsigned int bytes)
2430 {
2431 /* aaaa bbbb */
2432 if (offset >= req->overlap_offset + req->overlap_bytes) {
2433 return false;
2434 }
2435 /* bbbb aaaa */
2436 if (req->overlap_offset >= offset + bytes) {
2437 return false;
2438 }
2439 return true;
2440 }
2441
2442 static bool coroutine_fn wait_serialising_requests(BdrvTrackedRequest *self)
2443 {
2444 BlockDriverState *bs = self->bs;
2445 BdrvTrackedRequest *req;
2446 bool retry;
2447 bool waited = false;
2448
2449 if (!bs->serialising_in_flight) {
2450 return false;
2451 }
2452
2453 do {
2454 retry = false;
2455 QLIST_FOREACH(req, &bs->tracked_requests, list) {
2456 if (req == self || (!req->serialising && !self->serialising)) {
2457 continue;
2458 }
2459 if (tracked_request_overlaps(req, self->overlap_offset,
2460 self->overlap_bytes))
2461 {
2462 /* Hitting this means there was a reentrant request, for
2463 * example, a block driver issuing nested requests. This must
2464 * never happen since it means deadlock.
2465 */
2466 assert(qemu_coroutine_self() != req->co);
2467
2468 /* If the request is already (indirectly) waiting for us, or
2469 * will wait for us as soon as it wakes up, then just go on
2470 * (instead of producing a deadlock in the former case). */
2471 if (!req->waiting_for) {
2472 self->waiting_for = req;
2473 qemu_co_queue_wait(&req->wait_queue);
2474 self->waiting_for = NULL;
2475 retry = true;
2476 waited = true;
2477 break;
2478 }
2479 }
2480 }
2481 } while (retry);
2482
2483 return waited;
2484 }
2485
2486 /*
2487 * Return values:
2488 * 0 - success
2489 * -EINVAL - backing format specified, but no file
2490 * -ENOSPC - can't update the backing file because no space is left in the
2491 * image file header
2492 * -ENOTSUP - format driver doesn't support changing the backing file
2493 */
2494 int bdrv_change_backing_file(BlockDriverState *bs,
2495 const char *backing_file, const char *backing_fmt)
2496 {
2497 BlockDriver *drv = bs->drv;
2498 int ret;
2499
2500 /* Backing file format doesn't make sense without a backing file */
2501 if (backing_fmt && !backing_file) {
2502 return -EINVAL;
2503 }
2504
2505 if (drv->bdrv_change_backing_file != NULL) {
2506 ret = drv->bdrv_change_backing_file(bs, backing_file, backing_fmt);
2507 } else {
2508 ret = -ENOTSUP;
2509 }
2510
2511 if (ret == 0) {
2512 pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_file ?: "");
2513 pstrcpy(bs->backing_format, sizeof(bs->backing_format), backing_fmt ?: "");
2514 }
2515 return ret;
2516 }
2517
2518 /*
2519 * Finds the image layer in the chain that has 'bs' as its backing file.
2520 *
2521 * active is the current topmost image.
2522 *
2523 * Returns NULL if bs is not found in active's image chain,
2524 * or if active == bs.
2525 *
2526 * Returns the bottommost base image if bs == NULL.
2527 */
2528 BlockDriverState *bdrv_find_overlay(BlockDriverState *active,
2529 BlockDriverState *bs)
2530 {
2531 while (active && bs != active->backing_hd) {
2532 active = active->backing_hd;
2533 }
2534
2535 return active;
2536 }
2537
2538 /* Given a BDS, searches for the base layer. */
2539 BlockDriverState *bdrv_find_base(BlockDriverState *bs)
2540 {
2541 return bdrv_find_overlay(bs, NULL);
2542 }
2543
2544 typedef struct BlkIntermediateStates {
2545 BlockDriverState *bs;
2546 QSIMPLEQ_ENTRY(BlkIntermediateStates) entry;
2547 } BlkIntermediateStates;
2548
2549
2550 /*
2551 * Drops images above 'base' up to and including 'top', and sets the image
2552 * above 'top' to have base as its backing file.
2553 *
2554 * Requires that the overlay to 'top' is opened r/w, so that the backing file
2555 * information in 'bs' can be properly updated.
2556 *
2557 * E.g., this will convert the following chain:
2558 * bottom <- base <- intermediate <- top <- active
2559 *
2560 * to
2561 *
2562 * bottom <- base <- active
2563 *
2564 * It is allowed for bottom==base, in which case it converts:
2565 *
2566 * base <- intermediate <- top <- active
2567 *
2568 * to
2569 *
2570 * base <- active
2571 *
2572 * If backing_file_str is non-NULL, it will be used when modifying top's
2573 * overlay image metadata.
2574 *
2575 * Error conditions:
2576 * if active == top, that is considered an error
2577 *
2578 */
2579 int bdrv_drop_intermediate(BlockDriverState *active, BlockDriverState *top,
2580 BlockDriverState *base, const char *backing_file_str)
2581 {
2582 BlockDriverState *intermediate;
2583 BlockDriverState *base_bs = NULL;
2584 BlockDriverState *new_top_bs = NULL;
2585 BlkIntermediateStates *intermediate_state, *next;
2586 int ret = -EIO;
2587
2588 QSIMPLEQ_HEAD(states_to_delete, BlkIntermediateStates) states_to_delete;
2589 QSIMPLEQ_INIT(&states_to_delete);
2590
2591 if (!top->drv || !base->drv) {
2592 goto exit;
2593 }
2594
2595 new_top_bs = bdrv_find_overlay(active, top);
2596
2597 if (new_top_bs == NULL) {
2598 /* we could not find the image above 'top', this is an error */
2599 goto exit;
2600 }
2601
2602 /* special case of new_top_bs->backing_hd already pointing to base - nothing
2603 * to do, no intermediate images */
2604 if (new_top_bs->backing_hd == base) {
2605 ret = 0;
2606 goto exit;
2607 }
2608
2609 intermediate = top;
2610
2611 /* now we will go down through the list, and add each BDS we find
2612 * into our deletion queue, until we hit the 'base'
2613 */
2614 while (intermediate) {
2615 intermediate_state = g_malloc0(sizeof(BlkIntermediateStates));
2616 intermediate_state->bs = intermediate;
2617 QSIMPLEQ_INSERT_TAIL(&states_to_delete, intermediate_state, entry);
2618
2619 if (intermediate->backing_hd == base) {
2620 base_bs = intermediate->backing_hd;
2621 break;
2622 }
2623 intermediate = intermediate->backing_hd;
2624 }
2625 if (base_bs == NULL) {
2626 /* something went wrong, we did not end at the base. safely
2627 * unravel everything, and exit with error */
2628 goto exit;
2629 }
2630
2631 /* success - we can delete the intermediate states, and link top->base */
2632 backing_file_str = backing_file_str ? backing_file_str : base_bs->filename;
2633 ret = bdrv_change_backing_file(new_top_bs, backing_file_str,
2634 base_bs->drv ? base_bs->drv->format_name : "");
2635 if (ret) {
2636 goto exit;
2637 }
2638 bdrv_set_backing_hd(new_top_bs, base_bs);
2639
2640 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2641 /* so that bdrv_close() does not recursively close the chain */
2642 bdrv_set_backing_hd(intermediate_state->bs, NULL);
2643 bdrv_unref(intermediate_state->bs);
2644 }
2645 ret = 0;
2646
2647 exit:
2648 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2649 g_free(intermediate_state);
2650 }
2651 return ret;
2652 }
2653
2654
2655 static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset,
2656 size_t size)
2657 {
2658 int64_t len;
2659
2660 if (size > INT_MAX) {
2661 return -EIO;
2662 }
2663
2664 if (!bdrv_is_inserted(bs))
2665 return -ENOMEDIUM;
2666
2667 if (bs->growable)
2668 return 0;
2669
2670 len = bdrv_getlength(bs);
2671
2672 if (offset < 0)
2673 return -EIO;
2674
2675 if ((offset > len) || (len - offset < size))
2676 return -EIO;
2677
2678 return 0;
2679 }
2680
2681 static int bdrv_check_request(BlockDriverState *bs, int64_t sector_num,
2682 int nb_sectors)
2683 {
2684 if (nb_sectors < 0 || nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) {
2685 return -EIO;
2686 }
2687
2688 return bdrv_check_byte_request(bs, sector_num * BDRV_SECTOR_SIZE,
2689 nb_sectors * BDRV_SECTOR_SIZE);
2690 }
2691
2692 typedef struct RwCo {
2693 BlockDriverState *bs;
2694 int64_t offset;
2695 QEMUIOVector *qiov;
2696 bool is_write;
2697 int ret;
2698 BdrvRequestFlags flags;
2699 } RwCo;
2700
2701 static void coroutine_fn bdrv_rw_co_entry(void *opaque)
2702 {
2703 RwCo *rwco = opaque;
2704
2705 if (!rwco->is_write) {
2706 rwco->ret = bdrv_co_do_preadv(rwco->bs, rwco->offset,
2707 rwco->qiov->size, rwco->qiov,
2708 rwco->flags);
2709 } else {
2710 rwco->ret = bdrv_co_do_pwritev(rwco->bs, rwco->offset,
2711 rwco->qiov->size, rwco->qiov,
2712 rwco->flags);
2713 }
2714 }
2715
2716 /*
2717 * Process a vectored synchronous request using coroutines
2718 */
2719 static int bdrv_prwv_co(BlockDriverState *bs, int64_t offset,
2720 QEMUIOVector *qiov, bool is_write,
2721 BdrvRequestFlags flags)
2722 {
2723 Coroutine *co;
2724 RwCo rwco = {
2725 .bs = bs,
2726 .offset = offset,
2727 .qiov = qiov,
2728 .is_write = is_write,
2729 .ret = NOT_DONE,
2730 .flags = flags,
2731 };
2732
2733 /**
2734 * In sync call context, when the vcpu is blocked, this throttling timer
2735 * will not fire; so the I/O throttling function has to be disabled here
2736 * if it has been enabled.
2737 */
2738 if (bs->io_limits_enabled) {
2739 fprintf(stderr, "Disabling I/O throttling on '%s' due "
2740 "to synchronous I/O.\n", bdrv_get_device_name(bs));
2741 bdrv_io_limits_disable(bs);
2742 }
2743
2744 if (qemu_in_coroutine()) {
2745 /* Fast-path if already in coroutine context */
2746 bdrv_rw_co_entry(&rwco);
2747 } else {
2748 AioContext *aio_context = bdrv_get_aio_context(bs);
2749
2750 co = qemu_coroutine_create(bdrv_rw_co_entry);
2751 qemu_coroutine_enter(co, &rwco);
2752 while (rwco.ret == NOT_DONE) {
2753 aio_poll(aio_context, true);
2754 }
2755 }
2756 return rwco.ret;
2757 }
2758
2759 /*
2760 * Process a synchronous request using coroutines
2761 */
2762 static int bdrv_rw_co(BlockDriverState *bs, int64_t sector_num, uint8_t *buf,
2763 int nb_sectors, bool is_write, BdrvRequestFlags flags)
2764 {
2765 QEMUIOVector qiov;
2766 struct iovec iov = {
2767 .iov_base = (void *)buf,
2768 .iov_len = nb_sectors * BDRV_SECTOR_SIZE,
2769 };
2770
2771 if (nb_sectors < 0 || nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) {
2772 return -EINVAL;
2773 }
2774
2775 qemu_iovec_init_external(&qiov, &iov, 1);
2776 return bdrv_prwv_co(bs, sector_num << BDRV_SECTOR_BITS,
2777 &qiov, is_write, flags);
2778 }
2779
2780 /* return < 0 if error. See bdrv_write() for the return codes */
2781 int bdrv_read(BlockDriverState *bs, int64_t sector_num,
2782 uint8_t *buf, int nb_sectors)
2783 {
2784 return bdrv_rw_co(bs, sector_num, buf, nb_sectors, false, 0);
2785 }
2786
2787 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2788 int bdrv_read_unthrottled(BlockDriverState *bs, int64_t sector_num,
2789 uint8_t *buf, int nb_sectors)
2790 {
2791 bool enabled;
2792 int ret;
2793
2794 enabled = bs->io_limits_enabled;
2795 bs->io_limits_enabled = false;
2796 ret = bdrv_read(bs, sector_num, buf, nb_sectors);
2797 bs->io_limits_enabled = enabled;
2798 return ret;
2799 }
2800
2801 /* Return < 0 if error. Important errors are:
2802 -EIO generic I/O error (may happen for all errors)
2803 -ENOMEDIUM No media inserted.
2804 -EINVAL Invalid sector number or nb_sectors
2805 -EACCES Trying to write a read-only device
2806 */
2807 int bdrv_write(BlockDriverState *bs, int64_t sector_num,
2808 const uint8_t *buf, int nb_sectors)
2809 {
2810 return bdrv_rw_co(bs, sector_num, (uint8_t *)buf, nb_sectors, true, 0);
2811 }
2812
2813 int bdrv_write_zeroes(BlockDriverState *bs, int64_t sector_num,
2814 int nb_sectors, BdrvRequestFlags flags)
2815 {
2816 return bdrv_rw_co(bs, sector_num, NULL, nb_sectors, true,
2817 BDRV_REQ_ZERO_WRITE | flags);
2818 }
2819
2820 /*
2821 * Completely zero out a block device with the help of bdrv_write_zeroes.
2822 * The operation is sped up by checking the block status and only writing
2823 * zeroes to the device if they currently do not return zeroes. Optional
2824 * flags are passed through to bdrv_write_zeroes (e.g. BDRV_REQ_MAY_UNMAP).
2825 *
2826 * Returns < 0 on error, 0 on success. For error codes see bdrv_write().
2827 */
2828 int bdrv_make_zero(BlockDriverState *bs, BdrvRequestFlags flags)
2829 {
2830 int64_t target_size;
2831 int64_t ret, nb_sectors, sector_num = 0;
2832 int n;
2833
2834 target_size = bdrv_getlength(bs);
2835 if (target_size < 0) {
2836 return target_size;
2837 }
2838 target_size /= BDRV_SECTOR_SIZE;
2839
2840 for (;;) {
2841 nb_sectors = target_size - sector_num;
2842 if (nb_sectors <= 0) {
2843 return 0;
2844 }
2845 if (nb_sectors > INT_MAX) {
2846 nb_sectors = INT_MAX;
2847 }
2848 ret = bdrv_get_block_status(bs, sector_num, nb_sectors, &n);
2849 if (ret < 0) {
2850 error_report("error getting block status at sector %" PRId64 ": %s",
2851 sector_num, strerror(-ret));
2852 return ret;
2853 }
2854 if (ret & BDRV_BLOCK_ZERO) {
2855 sector_num += n;
2856 continue;
2857 }
2858 ret = bdrv_write_zeroes(bs, sector_num, n, flags);
2859 if (ret < 0) {
2860 error_report("error writing zeroes at sector %" PRId64 ": %s",
2861 sector_num, strerror(-ret));
2862 return ret;
2863 }
2864 sector_num += n;
2865 }
2866 }
2867
2868 int bdrv_pread(BlockDriverState *bs, int64_t offset, void *buf, int bytes)
2869 {
2870 QEMUIOVector qiov;
2871 struct iovec iov = {
2872 .iov_base = (void *)buf,
2873 .iov_len = bytes,
2874 };
2875 int ret;
2876
2877 if (bytes < 0) {
2878 return -EINVAL;
2879 }
2880
2881 qemu_iovec_init_external(&qiov, &iov, 1);
2882 ret = bdrv_prwv_co(bs, offset, &qiov, false, 0);
2883 if (ret < 0) {
2884 return ret;
2885 }
2886
2887 return bytes;
2888 }
2889
2890 int bdrv_pwritev(BlockDriverState *bs, int64_t offset, QEMUIOVector *qiov)
2891 {
2892 int ret;
2893
2894 ret = bdrv_prwv_co(bs, offset, qiov, true, 0);
2895 if (ret < 0) {
2896 return ret;
2897 }
2898
2899 return qiov->size;
2900 }
2901
2902 int bdrv_pwrite(BlockDriverState *bs, int64_t offset,
2903 const void *buf, int bytes)
2904 {
2905 QEMUIOVector qiov;
2906 struct iovec iov = {
2907 .iov_base = (void *) buf,
2908 .iov_len = bytes,
2909 };
2910
2911 if (bytes < 0) {
2912 return -EINVAL;
2913 }
2914
2915 qemu_iovec_init_external(&qiov, &iov, 1);
2916 return bdrv_pwritev(bs, offset, &qiov);
2917 }
2918
2919 /*
2920 * Writes to the file and ensures that no writes are reordered across this
2921 * request (acts as a barrier)
2922 *
2923 * Returns 0 on success, -errno in error cases.
2924 */
2925 int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset,
2926 const void *buf, int count)
2927 {
2928 int ret;
2929
2930 ret = bdrv_pwrite(bs, offset, buf, count);
2931 if (ret < 0) {
2932 return ret;
2933 }
2934
2935 /* No flush needed for cache modes that already do it */
2936 if (bs->enable_write_cache) {
2937 bdrv_flush(bs);
2938 }
2939
2940 return 0;
2941 }
2942
2943 static int coroutine_fn bdrv_co_do_copy_on_readv(BlockDriverState *bs,
2944 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
2945 {
2946 /* Perform I/O through a temporary buffer so that users who scribble over
2947 * their read buffer while the operation is in progress do not end up
2948 * modifying the image file. This is critical for zero-copy guest I/O
2949 * where anything might happen inside guest memory.
2950 */
2951 void *bounce_buffer;
2952
2953 BlockDriver *drv = bs->drv;
2954 struct iovec iov;
2955 QEMUIOVector bounce_qiov;
2956 int64_t cluster_sector_num;
2957 int cluster_nb_sectors;
2958 size_t skip_bytes;
2959 int ret;
2960
2961 /* Cover entire cluster so no additional backing file I/O is required when
2962 * allocating cluster in the image file.
2963 */
2964 bdrv_round_to_clusters(bs, sector_num, nb_sectors,
2965 &cluster_sector_num, &cluster_nb_sectors);
2966
2967 trace_bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors,
2968 cluster_sector_num, cluster_nb_sectors);
2969
2970 iov.iov_len = cluster_nb_sectors * BDRV_SECTOR_SIZE;
2971 iov.iov_base = bounce_buffer = qemu_blockalign(bs, iov.iov_len);
2972 qemu_iovec_init_external(&bounce_qiov, &iov, 1);
2973
2974 ret = drv->bdrv_co_readv(bs, cluster_sector_num, cluster_nb_sectors,
2975 &bounce_qiov);
2976 if (ret < 0) {
2977 goto err;
2978 }
2979
2980 if (drv->bdrv_co_write_zeroes &&
2981 buffer_is_zero(bounce_buffer, iov.iov_len)) {
2982 ret = bdrv_co_do_write_zeroes(bs, cluster_sector_num,
2983 cluster_nb_sectors, 0);
2984 } else {
2985 /* This does not change the data on the disk, it is not necessary
2986 * to flush even in cache=writethrough mode.
2987 */
2988 ret = drv->bdrv_co_writev(bs, cluster_sector_num, cluster_nb_sectors,
2989 &bounce_qiov);
2990 }
2991
2992 if (ret < 0) {
2993 /* It might be okay to ignore write errors for guest requests. If this
2994 * is a deliberate copy-on-read then we don't want to ignore the error.
2995 * Simply report it in all cases.
2996 */
2997 goto err;
2998 }
2999
3000 skip_bytes = (sector_num - cluster_sector_num) * BDRV_SECTOR_SIZE;
3001 qemu_iovec_from_buf(qiov, 0, bounce_buffer + skip_bytes,
3002 nb_sectors * BDRV_SECTOR_SIZE);
3003
3004 err:
3005 qemu_vfree(bounce_buffer);
3006 return ret;
3007 }
3008
3009 /*
3010 * Forwards an already correctly aligned request to the BlockDriver. This
3011 * handles copy on read and zeroing after EOF; any other features must be
3012 * implemented by the caller.
3013 */
3014 static int coroutine_fn bdrv_aligned_preadv(BlockDriverState *bs,
3015 BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
3016 int64_t align, QEMUIOVector *qiov, int flags)
3017 {
3018 BlockDriver *drv = bs->drv;
3019 int ret;
3020
3021 int64_t sector_num = offset >> BDRV_SECTOR_BITS;
3022 unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
3023
3024 assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
3025 assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
3026 assert(!qiov || bytes == qiov->size);
3027
3028 /* Handle Copy on Read and associated serialisation */
3029 if (flags & BDRV_REQ_COPY_ON_READ) {
3030 /* If we touch the same cluster it counts as an overlap. This
3031 * guarantees that allocating writes will be serialized and not race
3032 * with each other for the same cluster. For example, in copy-on-read
3033 * it ensures that the CoR read and write operations are atomic and
3034 * guest writes cannot interleave between them. */
3035 mark_request_serialising(req, bdrv_get_cluster_size(bs));
3036 }
3037
3038 wait_serialising_requests(req);
3039
3040 if (flags & BDRV_REQ_COPY_ON_READ) {
3041 int pnum;
3042
3043 ret = bdrv_is_allocated(bs, sector_num, nb_sectors, &pnum);
3044 if (ret < 0) {
3045 goto out;
3046 }
3047
3048 if (!ret || pnum != nb_sectors) {
3049 ret = bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors, qiov);
3050 goto out;
3051 }
3052 }
3053
3054 /* Forward the request to the BlockDriver */
3055 if (!(bs->zero_beyond_eof && bs->growable)) {
3056 ret = drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
3057 } else {
3058 /* Read zeros after EOF of growable BDSes */
3059 int64_t len, total_sectors, max_nb_sectors;
3060
3061 len = bdrv_getlength(bs);
3062 if (len < 0) {
3063 ret = len;
3064 goto out;
3065 }
3066
3067 total_sectors = DIV_ROUND_UP(len, BDRV_SECTOR_SIZE);
3068 max_nb_sectors = ROUND_UP(MAX(0, total_sectors - sector_num),
3069 align >> BDRV_SECTOR_BITS);
3070 if (max_nb_sectors > 0) {
3071 QEMUIOVector local_qiov;
3072 size_t local_sectors;
3073
3074 max_nb_sectors = MIN(max_nb_sectors, SIZE_MAX / BDRV_SECTOR_BITS);
3075 local_sectors = MIN(max_nb_sectors, nb_sectors);
3076
3077 qemu_iovec_init(&local_qiov, qiov->niov);
3078 qemu_iovec_concat(&local_qiov, qiov, 0,
3079 local_sectors * BDRV_SECTOR_SIZE);
3080
3081 ret = drv->bdrv_co_readv(bs, sector_num, local_sectors,
3082 &local_qiov);
3083
3084 qemu_iovec_destroy(&local_qiov);
3085 } else {
3086 ret = 0;
3087 }
3088
3089 /* Reading beyond end of file is supposed to produce zeroes */
3090 if (ret == 0 && total_sectors < sector_num + nb_sectors) {
3091 uint64_t offset = MAX(0, total_sectors - sector_num);
3092 uint64_t bytes = (sector_num + nb_sectors - offset) *
3093 BDRV_SECTOR_SIZE;
3094 qemu_iovec_memset(qiov, offset * BDRV_SECTOR_SIZE, 0, bytes);
3095 }
3096 }
3097
3098 out:
3099 return ret;
3100 }
3101
3102 /*
3103 * Handle a read request in coroutine context
3104 */
3105 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
3106 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
3107 BdrvRequestFlags flags)
3108 {
3109 BlockDriver *drv = bs->drv;
3110 BdrvTrackedRequest req;
3111
3112 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3113 uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
3114 uint8_t *head_buf = NULL;
3115 uint8_t *tail_buf = NULL;
3116 QEMUIOVector local_qiov;
3117 bool use_local_qiov = false;
3118 int ret;
3119
3120 if (!drv) {
3121 return -ENOMEDIUM;
3122 }
3123 if (bdrv_check_byte_request(bs, offset, bytes)) {
3124 return -EIO;
3125 }
3126
3127 if (bs->copy_on_read) {
3128 flags |= BDRV_REQ_COPY_ON_READ;
3129 }
3130
3131 /* throttling disk I/O */
3132 if (bs->io_limits_enabled) {
3133 bdrv_io_limits_intercept(bs, bytes, false);
3134 }
3135
3136 /* Align read if necessary by padding qiov */
3137 if (offset & (align - 1)) {
3138 head_buf = qemu_blockalign(bs, align);
3139 qemu_iovec_init(&local_qiov, qiov->niov + 2);
3140 qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1));
3141 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3142 use_local_qiov = true;
3143
3144 bytes += offset & (align - 1);
3145 offset = offset & ~(align - 1);
3146 }
3147
3148 if ((offset + bytes) & (align - 1)) {
3149 if (!use_local_qiov) {
3150 qemu_iovec_init(&local_qiov, qiov->niov + 1);
3151 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3152 use_local_qiov = true;
3153 }
3154 tail_buf = qemu_blockalign(bs, align);
3155 qemu_iovec_add(&local_qiov, tail_buf,
3156 align - ((offset + bytes) & (align - 1)));
3157
3158 bytes = ROUND_UP(bytes, align);
3159 }
3160
3161 tracked_request_begin(&req, bs, offset, bytes, false);
3162 ret = bdrv_aligned_preadv(bs, &req, offset, bytes, align,
3163 use_local_qiov ? &local_qiov : qiov,
3164 flags);
3165 tracked_request_end(&req);
3166
3167 if (use_local_qiov) {
3168 qemu_iovec_destroy(&local_qiov);
3169 qemu_vfree(head_buf);
3170 qemu_vfree(tail_buf);
3171 }
3172
3173 return ret;
3174 }
3175
3176 static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
3177 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
3178 BdrvRequestFlags flags)
3179 {
3180 if (nb_sectors < 0 || nb_sectors > (UINT_MAX >> BDRV_SECTOR_BITS)) {
3181 return -EINVAL;
3182 }
3183
3184 return bdrv_co_do_preadv(bs, sector_num << BDRV_SECTOR_BITS,
3185 nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
3186 }
3187
3188 int coroutine_fn bdrv_co_readv(BlockDriverState *bs, int64_t sector_num,
3189 int nb_sectors, QEMUIOVector *qiov)
3190 {
3191 trace_bdrv_co_readv(bs, sector_num, nb_sectors);
3192
3193 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov, 0);
3194 }
3195
3196 int coroutine_fn bdrv_co_copy_on_readv(BlockDriverState *bs,
3197 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
3198 {
3199 trace_bdrv_co_copy_on_readv(bs, sector_num, nb_sectors);
3200
3201 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov,
3202 BDRV_REQ_COPY_ON_READ);
3203 }
3204
3205 /* if no limit is specified in the BlockLimits use a default
3206 * of 32768 512-byte sectors (16 MiB) per request.
3207 */
3208 #define MAX_WRITE_ZEROES_DEFAULT 32768
3209
3210 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
3211 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags)
3212 {
3213 BlockDriver *drv = bs->drv;
3214 QEMUIOVector qiov;
3215 struct iovec iov = {0};
3216 int ret = 0;
3217
3218 int max_write_zeroes = bs->bl.max_write_zeroes ?
3219 bs->bl.max_write_zeroes : MAX_WRITE_ZEROES_DEFAULT;
3220
3221 while (nb_sectors > 0 && !ret) {
3222 int num = nb_sectors;
3223
3224 /* Align request. Block drivers can expect the "bulk" of the request
3225 * to be aligned.
3226 */
3227 if (bs->bl.write_zeroes_alignment
3228 && num > bs->bl.write_zeroes_alignment) {
3229 if (sector_num % bs->bl.write_zeroes_alignment != 0) {
3230 /* Make a small request up to the first aligned sector. */
3231 num = bs->bl.write_zeroes_alignment;
3232 num -= sector_num % bs->bl.write_zeroes_alignment;
3233 } else if ((sector_num + num) % bs->bl.write_zeroes_alignment != 0) {
3234 /* Shorten the request to the last aligned sector. num cannot
3235 * underflow because num > bs->bl.write_zeroes_alignment.
3236 */
3237 num -= (sector_num + num) % bs->bl.write_zeroes_alignment;
3238 }
3239 }
3240
3241 /* limit request size */
3242 if (num > max_write_zeroes) {
3243 num = max_write_zeroes;
3244 }
3245
3246 ret = -ENOTSUP;
3247 /* First try the efficient write zeroes operation */
3248 if (drv->bdrv_co_write_zeroes) {
3249 ret = drv->bdrv_co_write_zeroes(bs, sector_num, num, flags);
3250 }
3251
3252 if (ret == -ENOTSUP) {
3253 /* Fall back to bounce buffer if write zeroes is unsupported */
3254 iov.iov_len = num * BDRV_SECTOR_SIZE;
3255 if (iov.iov_base == NULL) {
3256 iov.iov_base = qemu_blockalign(bs, num * BDRV_SECTOR_SIZE);
3257 memset(iov.iov_base, 0, num * BDRV_SECTOR_SIZE);
3258 }
3259 qemu_iovec_init_external(&qiov, &iov, 1);
3260
3261 ret = drv->bdrv_co_writev(bs, sector_num, num, &qiov);
3262
3263 /* Keep bounce buffer around if it is big enough for all
3264 * all future requests.
3265 */
3266 if (num < max_write_zeroes) {
3267 qemu_vfree(iov.iov_base);
3268 iov.iov_base = NULL;
3269 }
3270 }
3271
3272 sector_num += num;
3273 nb_sectors -= num;
3274 }
3275
3276 qemu_vfree(iov.iov_base);
3277 return ret;
3278 }
3279
3280 /*
3281 * Forwards an already correctly aligned write request to the BlockDriver.
3282 */
3283 static int coroutine_fn bdrv_aligned_pwritev(BlockDriverState *bs,
3284 BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
3285 QEMUIOVector *qiov, int flags)
3286 {
3287 BlockDriver *drv = bs->drv;
3288 bool waited;
3289 int ret;
3290
3291 int64_t sector_num = offset >> BDRV_SECTOR_BITS;
3292 unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
3293
3294 assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
3295 assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
3296 assert(!qiov || bytes == qiov->size);
3297
3298 waited = wait_serialising_requests(req);
3299 assert(!waited || !req->serialising);
3300 assert(req->overlap_offset <= offset);
3301 assert(offset + bytes <= req->overlap_offset + req->overlap_bytes);
3302
3303 ret = notifier_with_return_list_notify(&bs->before_write_notifiers, req);
3304
3305 if (!ret && bs->detect_zeroes != BLOCKDEV_DETECT_ZEROES_OPTIONS_OFF &&
3306 !(flags & BDRV_REQ_ZERO_WRITE) && drv->bdrv_co_write_zeroes &&
3307 qemu_iovec_is_zero(qiov)) {
3308 flags |= BDRV_REQ_ZERO_WRITE;
3309 if (bs->detect_zeroes == BLOCKDEV_DETECT_ZEROES_OPTIONS_UNMAP) {
3310 flags |= BDRV_REQ_MAY_UNMAP;
3311 }
3312 }
3313
3314 if (ret < 0) {
3315 /* Do nothing, write notifier decided to fail this request */
3316 } else if (flags & BDRV_REQ_ZERO_WRITE) {
3317 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_ZERO);
3318 ret = bdrv_co_do_write_zeroes(bs, sector_num, nb_sectors, flags);
3319 } else {
3320 BLKDBG_EVENT(bs, BLKDBG_PWRITEV);
3321 ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov);
3322 }
3323 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_DONE);
3324
3325 if (ret == 0 && !bs->enable_write_cache) {
3326 ret = bdrv_co_flush(bs);
3327 }
3328
3329 bdrv_set_dirty(bs, sector_num, nb_sectors);
3330
3331 if (bs->wr_highest_sector < sector_num + nb_sectors - 1) {
3332 bs->wr_highest_sector = sector_num + nb_sectors - 1;
3333 }
3334 if (bs->growable && ret >= 0) {
3335 bs->total_sectors = MAX(bs->total_sectors, sector_num + nb_sectors);
3336 }
3337
3338 return ret;
3339 }
3340
3341 /*
3342 * Handle a write request in coroutine context
3343 */
3344 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
3345 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
3346 BdrvRequestFlags flags)
3347 {
3348 BdrvTrackedRequest req;
3349 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3350 uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
3351 uint8_t *head_buf = NULL;
3352 uint8_t *tail_buf = NULL;
3353 QEMUIOVector local_qiov;
3354 bool use_local_qiov = false;
3355 int ret;
3356
3357 if (!bs->drv) {
3358 return -ENOMEDIUM;
3359 }
3360 if (bs->read_only) {
3361 return -EACCES;
3362 }
3363 if (bdrv_check_byte_request(bs, offset, bytes)) {
3364 return -EIO;
3365 }
3366
3367 /* throttling disk I/O */
3368 if (bs->io_limits_enabled) {
3369 bdrv_io_limits_intercept(bs, bytes, true);
3370 }
3371
3372 /*
3373 * Align write if necessary by performing a read-modify-write cycle.
3374 * Pad qiov with the read parts and be sure to have a tracked request not
3375 * only for bdrv_aligned_pwritev, but also for the reads of the RMW cycle.
3376 */
3377 tracked_request_begin(&req, bs, offset, bytes, true);
3378
3379 if (offset & (align - 1)) {
3380 QEMUIOVector head_qiov;
3381 struct iovec head_iov;
3382
3383 mark_request_serialising(&req, align);
3384 wait_serialising_requests(&req);
3385
3386 head_buf = qemu_blockalign(bs, align);
3387 head_iov = (struct iovec) {
3388 .iov_base = head_buf,
3389 .iov_len = align,
3390 };
3391 qemu_iovec_init_external(&head_qiov, &head_iov, 1);
3392
3393 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_HEAD);
3394 ret = bdrv_aligned_preadv(bs, &req, offset & ~(align - 1), align,
3395 align, &head_qiov, 0);
3396 if (ret < 0) {
3397 goto fail;
3398 }
3399 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_HEAD);
3400
3401 qemu_iovec_init(&local_qiov, qiov->niov + 2);
3402 qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1));
3403 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3404 use_local_qiov = true;
3405
3406 bytes += offset & (align - 1);
3407 offset = offset & ~(align - 1);
3408 }
3409
3410 if ((offset + bytes) & (align - 1)) {
3411 QEMUIOVector tail_qiov;
3412 struct iovec tail_iov;
3413 size_t tail_bytes;
3414 bool waited;
3415
3416 mark_request_serialising(&req, align);
3417 waited = wait_serialising_requests(&req);
3418 assert(!waited || !use_local_qiov);
3419
3420 tail_buf = qemu_blockalign(bs, align);
3421 tail_iov = (struct iovec) {
3422 .iov_base = tail_buf,
3423 .iov_len = align,
3424 };
3425 qemu_iovec_init_external(&tail_qiov, &tail_iov, 1);
3426
3427 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_TAIL);
3428 ret = bdrv_aligned_preadv(bs, &req, (offset + bytes) & ~(align - 1), align,
3429 align, &tail_qiov, 0);
3430 if (ret < 0) {
3431 goto fail;
3432 }
3433 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_TAIL);
3434
3435 if (!use_local_qiov) {
3436 qemu_iovec_init(&local_qiov, qiov->niov + 1);
3437 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3438 use_local_qiov = true;
3439 }
3440
3441 tail_bytes = (offset + bytes) & (align - 1);
3442 qemu_iovec_add(&local_qiov, tail_buf + tail_bytes, align - tail_bytes);
3443
3444 bytes = ROUND_UP(bytes, align);
3445 }
3446
3447 ret = bdrv_aligned_pwritev(bs, &req, offset, bytes,
3448 use_local_qiov ? &local_qiov : qiov,
3449 flags);
3450
3451 fail:
3452 tracked_request_end(&req);
3453
3454 if (use_local_qiov) {
3455 qemu_iovec_destroy(&local_qiov);
3456 }
3457 qemu_vfree(head_buf);
3458 qemu_vfree(tail_buf);
3459
3460 return ret;
3461 }
3462
3463 static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
3464 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
3465 BdrvRequestFlags flags)
3466 {
3467 if (nb_sectors < 0 || nb_sectors > (INT_MAX >> BDRV_SECTOR_BITS)) {
3468 return -EINVAL;
3469 }
3470
3471 return bdrv_co_do_pwritev(bs, sector_num << BDRV_SECTOR_BITS,
3472 nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
3473 }
3474
3475 int coroutine_fn bdrv_co_writev(BlockDriverState *bs, int64_t sector_num,
3476 int nb_sectors, QEMUIOVector *qiov)
3477 {
3478 trace_bdrv_co_writev(bs, sector_num, nb_sectors);
3479
3480 return bdrv_co_do_writev(bs, sector_num, nb_sectors, qiov, 0);
3481 }
3482
3483 int coroutine_fn bdrv_co_write_zeroes(BlockDriverState *bs,
3484 int64_t sector_num, int nb_sectors,
3485 BdrvRequestFlags flags)
3486 {
3487 trace_bdrv_co_write_zeroes(bs, sector_num, nb_sectors, flags);
3488
3489 if (!(bs->open_flags & BDRV_O_UNMAP)) {
3490 flags &= ~BDRV_REQ_MAY_UNMAP;
3491 }
3492
3493 return bdrv_co_do_writev(bs, sector_num, nb_sectors, NULL,
3494 BDRV_REQ_ZERO_WRITE | flags);
3495 }
3496
3497 /**
3498 * Truncate file to 'offset' bytes (needed only for file protocols)
3499 */
3500 int bdrv_truncate(BlockDriverState *bs, int64_t offset)
3501 {
3502 BlockDriver *drv = bs->drv;
3503 int ret;
3504 if (!drv)
3505 return -ENOMEDIUM;
3506 if (!drv->bdrv_truncate)
3507 return -ENOTSUP;
3508 if (bs->read_only)
3509 return -EACCES;
3510
3511 ret = drv->bdrv_truncate(bs, offset);
3512 if (ret == 0) {
3513 ret = refresh_total_sectors(bs, offset >> BDRV_SECTOR_BITS);
3514 bdrv_dev_resize_cb(bs);
3515 }
3516 return ret;
3517 }
3518
3519 /**
3520 * Length of a allocated file in bytes. Sparse files are counted by actual
3521 * allocated space. Return < 0 if error or unknown.
3522 */
3523 int64_t bdrv_get_allocated_file_size(BlockDriverState *bs)
3524 {
3525 BlockDriver *drv = bs->drv;
3526 if (!drv) {
3527 return -ENOMEDIUM;
3528 }
3529 if (drv->bdrv_get_allocated_file_size) {
3530 return drv->bdrv_get_allocated_file_size(bs);
3531 }
3532 if (bs->file) {
3533 return bdrv_get_allocated_file_size(bs->file);
3534 }
3535 return -ENOTSUP;
3536 }
3537
3538 /**
3539 * Length of a file in bytes. Return < 0 if error or unknown.
3540 */
3541 int64_t bdrv_getlength(BlockDriverState *bs)
3542 {
3543 BlockDriver *drv = bs->drv;
3544 if (!drv)
3545 return -ENOMEDIUM;
3546
3547 if (drv->has_variable_length) {
3548 int ret = refresh_total_sectors(bs, bs->total_sectors);
3549 if (ret < 0) {
3550 return ret;
3551 }
3552 }
3553 return bs->total_sectors * BDRV_SECTOR_SIZE;
3554 }
3555
3556 /* return 0 as number of sectors if no device present or error */
3557 void bdrv_get_geometry(BlockDriverState *bs, uint64_t *nb_sectors_ptr)
3558 {
3559 int64_t length;
3560 length = bdrv_getlength(bs);
3561 if (length < 0)
3562 length = 0;
3563 else
3564 length = length >> BDRV_SECTOR_BITS;
3565 *nb_sectors_ptr = length;
3566 }
3567
3568 void bdrv_set_on_error(BlockDriverState *bs, BlockdevOnError on_read_error,
3569 BlockdevOnError on_write_error)
3570 {
3571 bs->on_read_error = on_read_error;
3572 bs->on_write_error = on_write_error;
3573 }
3574
3575 BlockdevOnError bdrv_get_on_error(BlockDriverState *bs, bool is_read)
3576 {
3577 return is_read ? bs->on_read_error : bs->on_write_error;
3578 }
3579
3580 BlockErrorAction bdrv_get_error_action(BlockDriverState *bs, bool is_read, int error)
3581 {
3582 BlockdevOnError on_err = is_read ? bs->on_read_error : bs->on_write_error;
3583
3584 switch (on_err) {
3585 case BLOCKDEV_ON_ERROR_ENOSPC:
3586 return (error == ENOSPC) ?
3587 BLOCK_ERROR_ACTION_STOP : BLOCK_ERROR_ACTION_REPORT;
3588 case BLOCKDEV_ON_ERROR_STOP:
3589 return BLOCK_ERROR_ACTION_STOP;
3590 case BLOCKDEV_ON_ERROR_REPORT:
3591 return BLOCK_ERROR_ACTION_REPORT;
3592 case BLOCKDEV_ON_ERROR_IGNORE:
3593 return BLOCK_ERROR_ACTION_IGNORE;
3594 default:
3595 abort();
3596 }
3597 }
3598
3599 /* This is done by device models because, while the block layer knows
3600 * about the error, it does not know whether an operation comes from
3601 * the device or the block layer (from a job, for example).
3602 */
3603 void bdrv_error_action(BlockDriverState *bs, BlockErrorAction action,
3604 bool is_read, int error)
3605 {
3606 assert(error >= 0);
3607
3608 if (action == BLOCK_ERROR_ACTION_STOP) {
3609 /* First set the iostatus, so that "info block" returns an iostatus
3610 * that matches the events raised so far (an additional error iostatus
3611 * is fine, but not a lost one).
3612 */
3613 bdrv_iostatus_set_err(bs, error);
3614
3615 /* Then raise the request to stop the VM and the event.
3616 * qemu_system_vmstop_request_prepare has two effects. First,
3617 * it ensures that the STOP event always comes after the
3618 * BLOCK_IO_ERROR event. Second, it ensures that even if management
3619 * can observe the STOP event and do a "cont" before the STOP
3620 * event is issued, the VM will not stop. In this case, vm_start()
3621 * also ensures that the STOP/RESUME pair of events is emitted.
3622 */
3623 qemu_system_vmstop_request_prepare();
3624 qapi_event_send_block_io_error(bdrv_get_device_name(bs),
3625 is_read ? IO_OPERATION_TYPE_READ :
3626 IO_OPERATION_TYPE_WRITE,
3627 action, &error_abort);
3628 qemu_system_vmstop_request(RUN_STATE_IO_ERROR);
3629 } else {
3630 qapi_event_send_block_io_error(bdrv_get_device_name(bs),
3631 is_read ? IO_OPERATION_TYPE_READ :
3632 IO_OPERATION_TYPE_WRITE,
3633 action, &error_abort);
3634 }
3635 }
3636
3637 int bdrv_is_read_only(BlockDriverState *bs)
3638 {
3639 return bs->read_only;
3640 }
3641
3642 int bdrv_is_sg(BlockDriverState *bs)
3643 {
3644 return bs->sg;
3645 }
3646
3647 int bdrv_enable_write_cache(BlockDriverState *bs)
3648 {
3649 return bs->enable_write_cache;
3650 }
3651
3652 void bdrv_set_enable_write_cache(BlockDriverState *bs, bool wce)
3653 {
3654 bs->enable_write_cache = wce;
3655
3656 /* so a reopen() will preserve wce */
3657 if (wce) {
3658 bs->open_flags |= BDRV_O_CACHE_WB;
3659 } else {
3660 bs->open_flags &= ~BDRV_O_CACHE_WB;
3661 }
3662 }
3663
3664 int bdrv_is_encrypted(BlockDriverState *bs)
3665 {
3666 if (bs->backing_hd && bs->backing_hd->encrypted)
3667 return 1;
3668 return bs->encrypted;
3669 }
3670
3671 int bdrv_key_required(BlockDriverState *bs)
3672 {
3673 BlockDriverState *backing_hd = bs->backing_hd;
3674
3675 if (backing_hd && backing_hd->encrypted && !backing_hd->valid_key)
3676 return 1;
3677 return (bs->encrypted && !bs->valid_key);
3678 }
3679
3680 int bdrv_set_key(BlockDriverState *bs, const char *key)
3681 {
3682 int ret;
3683 if (bs->backing_hd && bs->backing_hd->encrypted) {
3684 ret = bdrv_set_key(bs->backing_hd, key);
3685 if (ret < 0)
3686 return ret;
3687 if (!bs->encrypted)
3688 return 0;
3689 }
3690 if (!bs->encrypted) {
3691 return -EINVAL;
3692 } else if (!bs->drv || !bs->drv->bdrv_set_key) {
3693 return -ENOMEDIUM;
3694 }
3695 ret = bs->drv->bdrv_set_key(bs, key);
3696 if (ret < 0) {
3697 bs->valid_key = 0;
3698 } else if (!bs->valid_key) {
3699 bs->valid_key = 1;
3700 /* call the change callback now, we skipped it on open */
3701 bdrv_dev_change_media_cb(bs, true);
3702 }
3703 return ret;
3704 }
3705
3706 const char *bdrv_get_format_name(BlockDriverState *bs)
3707 {
3708 return bs->drv ? bs->drv->format_name : NULL;
3709 }
3710
3711 void bdrv_iterate_format(void (*it)(void *opaque, const char *name),
3712 void *opaque)
3713 {
3714 BlockDriver *drv;
3715 int count = 0;
3716 const char **formats = NULL;
3717
3718 QLIST_FOREACH(drv, &bdrv_drivers, list) {
3719 if (drv->format_name) {
3720 bool found = false;
3721 int i = count;
3722 while (formats && i && !found) {
3723 found = !strcmp(formats[--i], drv->format_name);
3724 }
3725
3726 if (!found) {
3727 formats = g_realloc(formats, (count + 1) * sizeof(char *));
3728 formats[count++] = drv->format_name;
3729 it(opaque, drv->format_name);
3730 }
3731 }
3732 }
3733 g_free(formats);
3734 }
3735
3736 /* This function is to find block backend bs */
3737 BlockDriverState *bdrv_find(const char *name)
3738 {
3739 BlockDriverState *bs;
3740
3741 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3742 if (!strcmp(name, bs->device_name)) {
3743 return bs;
3744 }
3745 }
3746 return NULL;
3747 }
3748
3749 /* This function is to find a node in the bs graph */
3750 BlockDriverState *bdrv_find_node(const char *node_name)
3751 {
3752 BlockDriverState *bs;
3753
3754 assert(node_name);
3755
3756 QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) {
3757 if (!strcmp(node_name, bs->node_name)) {
3758 return bs;
3759 }
3760 }
3761 return NULL;
3762 }
3763
3764 /* Put this QMP function here so it can access the static graph_bdrv_states. */
3765 BlockDeviceInfoList *bdrv_named_nodes_list(void)
3766 {
3767 BlockDeviceInfoList *list, *entry;
3768 BlockDriverState *bs;
3769
3770 list = NULL;
3771 QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) {
3772 entry = g_malloc0(sizeof(*entry));
3773 entry->value = bdrv_block_device_info(bs);
3774 entry->next = list;
3775 list = entry;
3776 }
3777
3778 return list;
3779 }
3780
3781 BlockDriverState *bdrv_lookup_bs(const char *device,
3782 const char *node_name,
3783 Error **errp)
3784 {
3785 BlockDriverState *bs = NULL;
3786
3787 if (device) {
3788 bs = bdrv_find(device);
3789
3790 if (bs) {
3791 return bs;
3792 }
3793 }
3794
3795 if (node_name) {
3796 bs = bdrv_find_node(node_name);
3797
3798 if (bs) {
3799 return bs;
3800 }
3801 }
3802
3803 error_setg(errp, "Cannot find device=%s nor node_name=%s",
3804 device ? device : "",
3805 node_name ? node_name : "");
3806 return NULL;
3807 }
3808
3809 /* If 'base' is in the same chain as 'top', return true. Otherwise,
3810 * return false. If either argument is NULL, return false. */
3811 bool bdrv_chain_contains(BlockDriverState *top, BlockDriverState *base)
3812 {
3813 while (top && top != base) {
3814 top = top->backing_hd;
3815 }
3816
3817 return top != NULL;
3818 }
3819
3820 BlockDriverState *bdrv_next(BlockDriverState *bs)
3821 {
3822 if (!bs) {
3823 return QTAILQ_FIRST(&bdrv_states);
3824 }
3825 return QTAILQ_NEXT(bs, device_list);
3826 }
3827
3828 void bdrv_iterate(void (*it)(void *opaque, BlockDriverState *bs), void *opaque)
3829 {
3830 BlockDriverState *bs;
3831
3832 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3833 it(opaque, bs);
3834 }
3835 }
3836
3837 const char *bdrv_get_device_name(BlockDriverState *bs)
3838 {
3839 return bs->device_name;
3840 }
3841
3842 int bdrv_get_flags(BlockDriverState *bs)
3843 {
3844 return bs->open_flags;
3845 }
3846
3847 int bdrv_flush_all(void)
3848 {
3849 BlockDriverState *bs;
3850 int result = 0;
3851
3852 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3853 AioContext *aio_context = bdrv_get_aio_context(bs);
3854 int ret;
3855
3856 aio_context_acquire(aio_context);
3857 ret = bdrv_flush(bs);
3858 if (ret < 0 && !result) {
3859 result = ret;
3860 }
3861 aio_context_release(aio_context);
3862 }
3863
3864 return result;
3865 }
3866
3867 int bdrv_has_zero_init_1(BlockDriverState *bs)
3868 {
3869 return 1;
3870 }
3871
3872 int bdrv_has_zero_init(BlockDriverState *bs)
3873 {
3874 assert(bs->drv);
3875
3876 /* If BS is a copy on write image, it is initialized to
3877 the contents of the base image, which may not be zeroes. */
3878 if (bs->backing_hd) {
3879 return 0;
3880 }
3881 if (bs->drv->bdrv_has_zero_init) {
3882 return bs->drv->bdrv_has_zero_init(bs);
3883 }
3884
3885 /* safe default */
3886 return 0;
3887 }
3888
3889 bool bdrv_unallocated_blocks_are_zero(BlockDriverState *bs)
3890 {
3891 BlockDriverInfo bdi;
3892
3893 if (bs->backing_hd) {
3894 return false;
3895 }
3896
3897 if (bdrv_get_info(bs, &bdi) == 0) {
3898 return bdi.unallocated_blocks_are_zero;
3899 }
3900
3901 return false;
3902 }
3903
3904 bool bdrv_can_write_zeroes_with_unmap(BlockDriverState *bs)
3905 {
3906 BlockDriverInfo bdi;
3907
3908 if (bs->backing_hd || !(bs->open_flags & BDRV_O_UNMAP)) {
3909 return false;
3910 }
3911
3912 if (bdrv_get_info(bs, &bdi) == 0) {
3913 return bdi.can_write_zeroes_with_unmap;
3914 }
3915
3916 return false;
3917 }
3918
3919 typedef struct BdrvCoGetBlockStatusData {
3920 BlockDriverState *bs;
3921 BlockDriverState *base;
3922 int64_t sector_num;
3923 int nb_sectors;
3924 int *pnum;
3925 int64_t ret;
3926 bool done;
3927 } BdrvCoGetBlockStatusData;
3928
3929 /*
3930 * Returns true iff the specified sector is present in the disk image. Drivers
3931 * not implementing the functionality are assumed to not support backing files,
3932 * hence all their sectors are reported as allocated.
3933 *
3934 * If 'sector_num' is beyond the end of the disk image the return value is 0
3935 * and 'pnum' is set to 0.
3936 *
3937 * 'pnum' is set to the number of sectors (including and immediately following
3938 * the specified sector) that are known to be in the same
3939 * allocated/unallocated state.
3940 *
3941 * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
3942 * beyond the end of the disk image it will be clamped.
3943 */
3944 static int64_t coroutine_fn bdrv_co_get_block_status(BlockDriverState *bs,
3945 int64_t sector_num,
3946 int nb_sectors, int *pnum)
3947 {
3948 int64_t length;
3949 int64_t n;
3950 int64_t ret, ret2;
3951
3952 length = bdrv_getlength(bs);
3953 if (length < 0) {
3954 return length;
3955 }
3956
3957 if (sector_num >= (length >> BDRV_SECTOR_BITS)) {
3958 *pnum = 0;
3959 return 0;
3960 }
3961
3962 n = bs->total_sectors - sector_num;
3963 if (n < nb_sectors) {
3964 nb_sectors = n;
3965 }
3966
3967 if (!bs->drv->bdrv_co_get_block_status) {
3968 *pnum = nb_sectors;
3969 ret = BDRV_BLOCK_DATA | BDRV_BLOCK_ALLOCATED;
3970 if (bs->drv->protocol_name) {
3971 ret |= BDRV_BLOCK_OFFSET_VALID | (sector_num * BDRV_SECTOR_SIZE);
3972 }
3973 return ret;
3974 }
3975
3976 ret = bs->drv->bdrv_co_get_block_status(bs, sector_num, nb_sectors, pnum);
3977 if (ret < 0) {
3978 *pnum = 0;
3979 return ret;
3980 }
3981
3982 if (ret & BDRV_BLOCK_RAW) {
3983 assert(ret & BDRV_BLOCK_OFFSET_VALID);
3984 return bdrv_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
3985 *pnum, pnum);
3986 }
3987
3988 if (ret & (BDRV_BLOCK_DATA | BDRV_BLOCK_ZERO)) {
3989 ret |= BDRV_BLOCK_ALLOCATED;
3990 }
3991
3992 if (!(ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO)) {
3993 if (bdrv_unallocated_blocks_are_zero(bs)) {
3994 ret |= BDRV_BLOCK_ZERO;
3995 } else if (bs->backing_hd) {
3996 BlockDriverState *bs2 = bs->backing_hd;
3997 int64_t length2 = bdrv_getlength(bs2);
3998 if (length2 >= 0 && sector_num >= (length2 >> BDRV_SECTOR_BITS)) {
3999 ret |= BDRV_BLOCK_ZERO;
4000 }
4001 }
4002 }
4003
4004 if (bs->file &&
4005 (ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO) &&
4006 (ret & BDRV_BLOCK_OFFSET_VALID)) {
4007 ret2 = bdrv_co_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
4008 *pnum, pnum);
4009 if (ret2 >= 0) {
4010 /* Ignore errors. This is just providing extra information, it
4011 * is useful but not necessary.
4012 */
4013 ret |= (ret2 & BDRV_BLOCK_ZERO);
4014 }
4015 }
4016
4017 return ret;
4018 }
4019
4020 /* Coroutine wrapper for bdrv_get_block_status() */
4021 static void coroutine_fn bdrv_get_block_status_co_entry(void *opaque)
4022 {
4023 BdrvCoGetBlockStatusData *data = opaque;
4024 BlockDriverState *bs = data->bs;
4025
4026 data->ret = bdrv_co_get_block_status(bs, data->sector_num, data->nb_sectors,
4027 data->pnum);
4028 data->done = true;
4029 }
4030
4031 /*
4032 * Synchronous wrapper around bdrv_co_get_block_status().
4033 *
4034 * See bdrv_co_get_block_status() for details.
4035 */
4036 int64_t bdrv_get_block_status(BlockDriverState *bs, int64_t sector_num,
4037 int nb_sectors, int *pnum)
4038 {
4039 Coroutine *co;
4040 BdrvCoGetBlockStatusData data = {
4041 .bs = bs,
4042 .sector_num = sector_num,
4043 .nb_sectors = nb_sectors,
4044 .pnum = pnum,
4045 .done = false,
4046 };
4047
4048 if (qemu_in_coroutine()) {
4049 /* Fast-path if already in coroutine context */
4050 bdrv_get_block_status_co_entry(&data);
4051 } else {
4052 AioContext *aio_context = bdrv_get_aio_context(bs);
4053
4054 co = qemu_coroutine_create(bdrv_get_block_status_co_entry);
4055 qemu_coroutine_enter(co, &data);
4056 while (!data.done) {
4057 aio_poll(aio_context, true);
4058 }
4059 }
4060 return data.ret;
4061 }
4062
4063 int coroutine_fn bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num,
4064 int nb_sectors, int *pnum)
4065 {
4066 int64_t ret = bdrv_get_block_status(bs, sector_num, nb_sectors, pnum);
4067 if (ret < 0) {
4068 return ret;
4069 }
4070 return !!(ret & BDRV_BLOCK_ALLOCATED);
4071 }
4072
4073 /*
4074 * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
4075 *
4076 * Return true if the given sector is allocated in any image between
4077 * BASE and TOP (inclusive). BASE can be NULL to check if the given
4078 * sector is allocated in any image of the chain. Return false otherwise.
4079 *
4080 * 'pnum' is set to the number of sectors (including and immediately following
4081 * the specified sector) that are known to be in the same
4082 * allocated/unallocated state.
4083 *
4084 */
4085 int bdrv_is_allocated_above(BlockDriverState *top,
4086 BlockDriverState *base,
4087 int64_t sector_num,
4088 int nb_sectors, int *pnum)
4089 {
4090 BlockDriverState *intermediate;
4091 int ret, n = nb_sectors;
4092
4093 intermediate = top;
4094 while (intermediate && intermediate != base) {
4095 int pnum_inter;
4096 ret = bdrv_is_allocated(intermediate, sector_num, nb_sectors,
4097 &pnum_inter);
4098 if (ret < 0) {
4099 return ret;
4100 } else if (ret) {
4101 *pnum = pnum_inter;
4102 return 1;
4103 }
4104
4105 /*
4106 * [sector_num, nb_sectors] is unallocated on top but intermediate
4107 * might have
4108 *
4109 * [sector_num+x, nr_sectors] allocated.
4110 */
4111 if (n > pnum_inter &&
4112 (intermediate == top ||
4113 sector_num + pnum_inter < intermediate->total_sectors)) {
4114 n = pnum_inter;
4115 }
4116
4117 intermediate = intermediate->backing_hd;
4118 }
4119
4120 *pnum = n;
4121 return 0;
4122 }
4123
4124 const char *bdrv_get_encrypted_filename(BlockDriverState *bs)
4125 {
4126 if (bs->backing_hd && bs->backing_hd->encrypted)
4127 return bs->backing_file;
4128 else if (bs->encrypted)
4129 return bs->filename;
4130 else
4131 return NULL;
4132 }
4133
4134 void bdrv_get_backing_filename(BlockDriverState *bs,
4135 char *filename, int filename_size)
4136 {
4137 pstrcpy(filename, filename_size, bs->backing_file);
4138 }
4139
4140 int bdrv_write_compressed(BlockDriverState *bs, int64_t sector_num,
4141 const uint8_t *buf, int nb_sectors)
4142 {
4143 BlockDriver *drv = bs->drv;
4144 if (!drv)
4145 return -ENOMEDIUM;
4146 if (!drv->bdrv_write_compressed)
4147 return -ENOTSUP;
4148 if (bdrv_check_request(bs, sector_num, nb_sectors))
4149 return -EIO;
4150
4151 assert(QLIST_EMPTY(&bs->dirty_bitmaps));
4152
4153 return drv->bdrv_write_compressed(bs, sector_num, buf, nb_sectors);
4154 }
4155
4156 int bdrv_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
4157 {
4158 BlockDriver *drv = bs->drv;
4159 if (!drv)
4160 return -ENOMEDIUM;
4161 if (!drv->bdrv_get_info)
4162 return -ENOTSUP;
4163 memset(bdi, 0, sizeof(*bdi));
4164 return drv->bdrv_get_info(bs, bdi);
4165 }
4166
4167 ImageInfoSpecific *bdrv_get_specific_info(BlockDriverState *bs)
4168 {
4169 BlockDriver *drv = bs->drv;
4170 if (drv && drv->bdrv_get_specific_info) {
4171 return drv->bdrv_get_specific_info(bs);
4172 }
4173 return NULL;
4174 }
4175
4176 int bdrv_save_vmstate(BlockDriverState *bs, const uint8_t *buf,
4177 int64_t pos, int size)
4178 {
4179 QEMUIOVector qiov;
4180 struct iovec iov = {
4181 .iov_base = (void *) buf,
4182 .iov_len = size,
4183 };
4184
4185 qemu_iovec_init_external(&qiov, &iov, 1);
4186 return bdrv_writev_vmstate(bs, &qiov, pos);
4187 }
4188
4189 int bdrv_writev_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos)
4190 {
4191 BlockDriver *drv = bs->drv;
4192
4193 if (!drv) {
4194 return -ENOMEDIUM;
4195 } else if (drv->bdrv_save_vmstate) {
4196 return drv->bdrv_save_vmstate(bs, qiov, pos);
4197 } else if (bs->file) {
4198 return bdrv_writev_vmstate(bs->file, qiov, pos);
4199 }
4200
4201 return -ENOTSUP;
4202 }
4203
4204 int bdrv_load_vmstate(BlockDriverState *bs, uint8_t *buf,
4205 int64_t pos, int size)
4206 {
4207 BlockDriver *drv = bs->drv;
4208 if (!drv)
4209 return -ENOMEDIUM;
4210 if (drv->bdrv_load_vmstate)
4211 return drv->bdrv_load_vmstate(bs, buf, pos, size);
4212 if (bs->file)
4213 return bdrv_load_vmstate(bs->file, buf, pos, size);
4214 return -ENOTSUP;
4215 }
4216
4217 void bdrv_debug_event(BlockDriverState *bs, BlkDebugEvent event)
4218 {
4219 if (!bs || !bs->drv || !bs->drv->bdrv_debug_event) {
4220 return;
4221 }
4222
4223 bs->drv->bdrv_debug_event(bs, event);
4224 }
4225
4226 int bdrv_debug_breakpoint(BlockDriverState *bs, const char *event,
4227 const char *tag)
4228 {
4229 while (bs && bs->drv && !bs->drv->bdrv_debug_breakpoint) {
4230 bs = bs->file;
4231 }
4232
4233 if (bs && bs->drv && bs->drv->bdrv_debug_breakpoint) {
4234 return bs->drv->bdrv_debug_breakpoint(bs, event, tag);
4235 }
4236
4237 return -ENOTSUP;
4238 }
4239
4240 int bdrv_debug_remove_breakpoint(BlockDriverState *bs, const char *tag)
4241 {
4242 while (bs && bs->drv && !bs->drv->bdrv_debug_remove_breakpoint) {
4243 bs = bs->file;
4244 }
4245
4246 if (bs && bs->drv && bs->drv->bdrv_debug_remove_breakpoint) {
4247 return bs->drv->bdrv_debug_remove_breakpoint(bs, tag);
4248 }
4249
4250 return -ENOTSUP;
4251 }
4252
4253 int bdrv_debug_resume(BlockDriverState *bs, const char *tag)
4254 {
4255 while (bs && (!bs->drv || !bs->drv->bdrv_debug_resume)) {
4256 bs = bs->file;
4257 }
4258
4259 if (bs && bs->drv && bs->drv->bdrv_debug_resume) {
4260 return bs->drv->bdrv_debug_resume(bs, tag);
4261 }
4262
4263 return -ENOTSUP;
4264 }
4265
4266 bool bdrv_debug_is_suspended(BlockDriverState *bs, const char *tag)
4267 {
4268 while (bs && bs->drv && !bs->drv->bdrv_debug_is_suspended) {
4269 bs = bs->file;
4270 }
4271
4272 if (bs && bs->drv && bs->drv->bdrv_debug_is_suspended) {
4273 return bs->drv->bdrv_debug_is_suspended(bs, tag);
4274 }
4275
4276 return false;
4277 }
4278
4279 int bdrv_is_snapshot(BlockDriverState *bs)
4280 {
4281 return !!(bs->open_flags & BDRV_O_SNAPSHOT);
4282 }
4283
4284 /* backing_file can either be relative, or absolute, or a protocol. If it is
4285 * relative, it must be relative to the chain. So, passing in bs->filename
4286 * from a BDS as backing_file should not be done, as that may be relative to
4287 * the CWD rather than the chain. */
4288 BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
4289 const char *backing_file)
4290 {
4291 char *filename_full = NULL;
4292 char *backing_file_full = NULL;
4293 char *filename_tmp = NULL;
4294 int is_protocol = 0;
4295 BlockDriverState *curr_bs = NULL;
4296 BlockDriverState *retval = NULL;
4297
4298 if (!bs || !bs->drv || !backing_file) {
4299 return NULL;
4300 }
4301
4302 filename_full = g_malloc(PATH_MAX);
4303 backing_file_full = g_malloc(PATH_MAX);
4304 filename_tmp = g_malloc(PATH_MAX);
4305
4306 is_protocol = path_has_protocol(backing_file);
4307
4308 for (curr_bs = bs; curr_bs->backing_hd; curr_bs = curr_bs->backing_hd) {
4309
4310 /* If either of the filename paths is actually a protocol, then
4311 * compare unmodified paths; otherwise make paths relative */
4312 if (is_protocol || path_has_protocol(curr_bs->backing_file)) {
4313 if (strcmp(backing_file, curr_bs->backing_file) == 0) {
4314 retval = curr_bs->backing_hd;
4315 break;
4316 }
4317 } else {
4318 /* If not an absolute filename path, make it relative to the current
4319 * image's filename path */
4320 path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
4321 backing_file);
4322
4323 /* We are going to compare absolute pathnames */
4324 if (!realpath(filename_tmp, filename_full)) {
4325 continue;
4326 }
4327
4328 /* We need to make sure the backing filename we are comparing against
4329 * is relative to the current image filename (or absolute) */
4330 path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
4331 curr_bs->backing_file);
4332
4333 if (!realpath(filename_tmp, backing_file_full)) {
4334 continue;
4335 }
4336
4337 if (strcmp(backing_file_full, filename_full) == 0) {
4338 retval = curr_bs->backing_hd;
4339 break;
4340 }
4341 }
4342 }
4343
4344 g_free(filename_full);
4345 g_free(backing_file_full);
4346 g_free(filename_tmp);
4347 return retval;
4348 }
4349
4350 int bdrv_get_backing_file_depth(BlockDriverState *bs)
4351 {
4352 if (!bs->drv) {
4353 return 0;
4354 }
4355
4356 if (!bs->backing_hd) {
4357 return 0;
4358 }
4359
4360 return 1 + bdrv_get_backing_file_depth(bs->backing_hd);
4361 }
4362
4363 /**************************************************************/
4364 /* async I/Os */
4365
4366 BlockDriverAIOCB *bdrv_aio_readv(BlockDriverState *bs, int64_t sector_num,
4367 QEMUIOVector *qiov, int nb_sectors,
4368 BlockDriverCompletionFunc *cb, void *opaque)
4369 {
4370 trace_bdrv_aio_readv(bs, sector_num, nb_sectors, opaque);
4371
4372 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0,
4373 cb, opaque, false);
4374 }
4375
4376 BlockDriverAIOCB *bdrv_aio_writev(BlockDriverState *bs, int64_t sector_num,
4377 QEMUIOVector *qiov, int nb_sectors,
4378 BlockDriverCompletionFunc *cb, void *opaque)
4379 {
4380 trace_bdrv_aio_writev(bs, sector_num, nb_sectors, opaque);
4381
4382 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0,
4383 cb, opaque, true);
4384 }
4385
4386 BlockDriverAIOCB *bdrv_aio_write_zeroes(BlockDriverState *bs,
4387 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags,
4388 BlockDriverCompletionFunc *cb, void *opaque)
4389 {
4390 trace_bdrv_aio_write_zeroes(bs, sector_num, nb_sectors, flags, opaque);
4391
4392 return bdrv_co_aio_rw_vector(bs, sector_num, NULL, nb_sectors,
4393 BDRV_REQ_ZERO_WRITE | flags,
4394 cb, opaque, true);
4395 }
4396
4397
4398 typedef struct MultiwriteCB {
4399 int error;
4400 int num_requests;
4401 int num_callbacks;
4402 struct {
4403 BlockDriverCompletionFunc *cb;
4404 void *opaque;
4405 QEMUIOVector *free_qiov;
4406 } callbacks[];
4407 } MultiwriteCB;
4408
4409 static void multiwrite_user_cb(MultiwriteCB *mcb)
4410 {
4411 int i;
4412
4413 for (i = 0; i < mcb->num_callbacks; i++) {
4414 mcb->callbacks[i].cb(mcb->callbacks[i].opaque, mcb->error);
4415 if (mcb->callbacks[i].free_qiov) {
4416 qemu_iovec_destroy(mcb->callbacks[i].free_qiov);
4417 }
4418 g_free(mcb->callbacks[i].free_qiov);
4419 }
4420 }
4421
4422 static void multiwrite_cb(void *opaque, int ret)
4423 {
4424 MultiwriteCB *mcb = opaque;
4425
4426 trace_multiwrite_cb(mcb, ret);
4427
4428 if (ret < 0 && !mcb->error) {
4429 mcb->error = ret;
4430 }
4431
4432 mcb->num_requests--;
4433 if (mcb->num_requests == 0) {
4434 multiwrite_user_cb(mcb);
4435 g_free(mcb);
4436 }
4437 }
4438
4439 static int multiwrite_req_compare(const void *a, const void *b)
4440 {
4441 const BlockRequest *req1 = a, *req2 = b;
4442
4443 /*
4444 * Note that we can't simply subtract req2->sector from req1->sector
4445 * here as that could overflow the return value.
4446 */
4447 if (req1->sector > req2->sector) {
4448 return 1;
4449 } else if (req1->sector < req2->sector) {
4450 return -1;
4451 } else {
4452 return 0;
4453 }
4454 }
4455
4456 /*
4457 * Takes a bunch of requests and tries to merge them. Returns the number of
4458 * requests that remain after merging.
4459 */
4460 static int multiwrite_merge(BlockDriverState *bs, BlockRequest *reqs,
4461 int num_reqs, MultiwriteCB *mcb)
4462 {
4463 int i, outidx;
4464
4465 // Sort requests by start sector
4466 qsort(reqs, num_reqs, sizeof(*reqs), &multiwrite_req_compare);
4467
4468 // Check if adjacent requests touch the same clusters. If so, combine them,
4469 // filling up gaps with zero sectors.
4470 outidx = 0;
4471 for (i = 1; i < num_reqs; i++) {
4472 int merge = 0;
4473 int64_t oldreq_last = reqs[outidx].sector + reqs[outidx].nb_sectors;
4474
4475 // Handle exactly sequential writes and overlapping writes.
4476 if (reqs[i].sector <= oldreq_last) {
4477 merge = 1;
4478 }
4479
4480 if (reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1 > IOV_MAX) {
4481 merge = 0;
4482 }
4483
4484 if (merge) {
4485 size_t size;
4486 QEMUIOVector *qiov = g_malloc0(sizeof(*qiov));
4487 qemu_iovec_init(qiov,
4488 reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1);
4489
4490 // Add the first request to the merged one. If the requests are
4491 // overlapping, drop the last sectors of the first request.
4492 size = (reqs[i].sector - reqs[outidx].sector) << 9;
4493 qemu_iovec_concat(qiov, reqs[outidx].qiov, 0, size);
4494
4495 // We should need to add any zeros between the two requests
4496 assert (reqs[i].sector <= oldreq_last);
4497
4498 // Add the second request
4499 qemu_iovec_concat(qiov, reqs[i].qiov, 0, reqs[i].qiov->size);
4500
4501 reqs[outidx].nb_sectors = qiov->size >> 9;
4502 reqs[outidx].qiov = qiov;
4503
4504 mcb->callbacks[i].free_qiov = reqs[outidx].qiov;
4505 } else {
4506 outidx++;
4507 reqs[outidx].sector = reqs[i].sector;
4508 reqs[outidx].nb_sectors = reqs[i].nb_sectors;
4509 reqs[outidx].qiov = reqs[i].qiov;
4510 }
4511 }
4512
4513 return outidx + 1;
4514 }
4515
4516 /*
4517 * Submit multiple AIO write requests at once.
4518 *
4519 * On success, the function returns 0 and all requests in the reqs array have
4520 * been submitted. In error case this function returns -1, and any of the
4521 * requests may or may not be submitted yet. In particular, this means that the
4522 * callback will be called for some of the requests, for others it won't. The
4523 * caller must check the error field of the BlockRequest to wait for the right
4524 * callbacks (if error != 0, no callback will be called).
4525 *
4526 * The implementation may modify the contents of the reqs array, e.g. to merge
4527 * requests. However, the fields opaque and error are left unmodified as they
4528 * are used to signal failure for a single request to the caller.
4529 */
4530 int bdrv_aio_multiwrite(BlockDriverState *bs, BlockRequest *reqs, int num_reqs)
4531 {
4532 MultiwriteCB *mcb;
4533 int i;
4534
4535 /* don't submit writes if we don't have a medium */
4536 if (bs->drv == NULL) {
4537 for (i = 0; i < num_reqs; i++) {
4538 reqs[i].error = -ENOMEDIUM;
4539 }
4540 return -1;
4541 }
4542
4543 if (num_reqs == 0) {
4544 return 0;
4545 }
4546
4547 // Create MultiwriteCB structure
4548 mcb = g_malloc0(sizeof(*mcb) + num_reqs * sizeof(*mcb->callbacks));
4549 mcb->num_requests = 0;
4550 mcb->num_callbacks = num_reqs;
4551
4552 for (i = 0; i < num_reqs; i++) {
4553 mcb->callbacks[i].cb = reqs[i].cb;
4554 mcb->callbacks[i].opaque = reqs[i].opaque;
4555 }
4556
4557 // Check for mergable requests
4558 num_reqs = multiwrite_merge(bs, reqs, num_reqs, mcb);
4559
4560 trace_bdrv_aio_multiwrite(mcb, mcb->num_callbacks, num_reqs);
4561
4562 /* Run the aio requests. */
4563 mcb->num_requests = num_reqs;
4564 for (i = 0; i < num_reqs; i++) {
4565 bdrv_co_aio_rw_vector(bs, reqs[i].sector, reqs[i].qiov,
4566 reqs[i].nb_sectors, reqs[i].flags,
4567 multiwrite_cb, mcb,
4568 true);
4569 }
4570
4571 return 0;
4572 }
4573
4574 void bdrv_aio_cancel(BlockDriverAIOCB *acb)
4575 {
4576 acb->aiocb_info->cancel(acb);
4577 }
4578
4579 /**************************************************************/
4580 /* async block device emulation */
4581
4582 typedef struct BlockDriverAIOCBSync {
4583 BlockDriverAIOCB common;
4584 QEMUBH *bh;
4585 int ret;
4586 /* vector translation state */
4587 QEMUIOVector *qiov;
4588 uint8_t *bounce;
4589 int is_write;
4590 } BlockDriverAIOCBSync;
4591
4592 static void bdrv_aio_cancel_em(BlockDriverAIOCB *blockacb)
4593 {
4594 BlockDriverAIOCBSync *acb =
4595 container_of(blockacb, BlockDriverAIOCBSync, common);
4596 qemu_bh_delete(acb->bh);
4597 acb->bh = NULL;
4598 qemu_aio_release(acb);
4599 }
4600
4601 static const AIOCBInfo bdrv_em_aiocb_info = {
4602 .aiocb_size = sizeof(BlockDriverAIOCBSync),
4603 .cancel = bdrv_aio_cancel_em,
4604 };
4605
4606 static void bdrv_aio_bh_cb(void *opaque)
4607 {
4608 BlockDriverAIOCBSync *acb = opaque;
4609
4610 if (!acb->is_write)
4611 qemu_iovec_from_buf(acb->qiov, 0, acb->bounce, acb->qiov->size);
4612 qemu_vfree(acb->bounce);
4613 acb->common.cb(acb->common.opaque, acb->ret);
4614 qemu_bh_delete(acb->bh);
4615 acb->bh = NULL;
4616 qemu_aio_release(acb);
4617 }
4618
4619 static BlockDriverAIOCB *bdrv_aio_rw_vector(BlockDriverState *bs,
4620 int64_t sector_num,
4621 QEMUIOVector *qiov,
4622 int nb_sectors,
4623 BlockDriverCompletionFunc *cb,
4624 void *opaque,
4625 int is_write)
4626
4627 {
4628 BlockDriverAIOCBSync *acb;
4629
4630 acb = qemu_aio_get(&bdrv_em_aiocb_info, bs, cb, opaque);
4631 acb->is_write = is_write;
4632 acb->qiov = qiov;
4633 acb->bounce = qemu_blockalign(bs, qiov->size);
4634 acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_aio_bh_cb, acb);
4635
4636 if (is_write) {
4637 qemu_iovec_to_buf(acb->qiov, 0, acb->bounce, qiov->size);
4638 acb->ret = bs->drv->bdrv_write(bs, sector_num, acb->bounce, nb_sectors);
4639 } else {
4640 acb->ret = bs->drv->bdrv_read(bs, sector_num, acb->bounce, nb_sectors);
4641 }
4642
4643 qemu_bh_schedule(acb->bh);
4644
4645 return &acb->common;
4646 }
4647
4648 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
4649 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
4650 BlockDriverCompletionFunc *cb, void *opaque)
4651 {
4652 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 0);
4653 }
4654
4655 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
4656 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
4657 BlockDriverCompletionFunc *cb, void *opaque)
4658 {
4659 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 1);
4660 }
4661
4662
4663 typedef struct BlockDriverAIOCBCoroutine {
4664 BlockDriverAIOCB common;
4665 BlockRequest req;
4666 bool is_write;
4667 bool *done;
4668 QEMUBH* bh;
4669 } BlockDriverAIOCBCoroutine;
4670
4671 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB *blockacb)
4672 {
4673 AioContext *aio_context = bdrv_get_aio_context(blockacb->bs);
4674 BlockDriverAIOCBCoroutine *acb =
4675 container_of(blockacb, BlockDriverAIOCBCoroutine, common);
4676 bool done = false;
4677
4678 acb->done = &done;
4679 while (!done) {
4680 aio_poll(aio_context, true);
4681 }
4682 }
4683
4684 static const AIOCBInfo bdrv_em_co_aiocb_info = {
4685 .aiocb_size = sizeof(BlockDriverAIOCBCoroutine),
4686 .cancel = bdrv_aio_co_cancel_em,
4687 };
4688
4689 static void bdrv_co_em_bh(void *opaque)
4690 {
4691 BlockDriverAIOCBCoroutine *acb = opaque;
4692
4693 acb->common.cb(acb->common.opaque, acb->req.error);
4694
4695 if (acb->done) {
4696 *acb->done = true;
4697 }
4698
4699 qemu_bh_delete(acb->bh);
4700 qemu_aio_release(acb);
4701 }
4702
4703 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
4704 static void coroutine_fn bdrv_co_do_rw(void *opaque)
4705 {
4706 BlockDriverAIOCBCoroutine *acb = opaque;
4707 BlockDriverState *bs = acb->common.bs;
4708
4709 if (!acb->is_write) {
4710 acb->req.error = bdrv_co_do_readv(bs, acb->req.sector,
4711 acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
4712 } else {
4713 acb->req.error = bdrv_co_do_writev(bs, acb->req.sector,
4714 acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
4715 }
4716
4717 acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_co_em_bh, acb);
4718 qemu_bh_schedule(acb->bh);
4719 }
4720
4721 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
4722 int64_t sector_num,
4723 QEMUIOVector *qiov,
4724 int nb_sectors,
4725 BdrvRequestFlags flags,
4726 BlockDriverCompletionFunc *cb,
4727 void *opaque,
4728 bool is_write)
4729 {
4730 Coroutine *co;
4731 BlockDriverAIOCBCoroutine *acb;
4732
4733 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4734 acb->req.sector = sector_num;
4735 acb->req.nb_sectors = nb_sectors;
4736 acb->req.qiov = qiov;
4737 acb->req.flags = flags;
4738 acb->is_write = is_write;
4739 acb->done = NULL;
4740
4741 co = qemu_coroutine_create(bdrv_co_do_rw);
4742 qemu_coroutine_enter(co, acb);
4743
4744 return &acb->common;
4745 }
4746
4747 static void coroutine_fn bdrv_aio_flush_co_entry(void *opaque)
4748 {
4749 BlockDriverAIOCBCoroutine *acb = opaque;
4750 BlockDriverState *bs = acb->common.bs;
4751
4752 acb->req.error = bdrv_co_flush(bs);
4753 acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_co_em_bh, acb);
4754 qemu_bh_schedule(acb->bh);
4755 }
4756
4757 BlockDriverAIOCB *bdrv_aio_flush(BlockDriverState *bs,
4758 BlockDriverCompletionFunc *cb, void *opaque)
4759 {
4760 trace_bdrv_aio_flush(bs, opaque);
4761
4762 Coroutine *co;
4763 BlockDriverAIOCBCoroutine *acb;
4764
4765 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4766 acb->done = NULL;
4767
4768 co = qemu_coroutine_create(bdrv_aio_flush_co_entry);
4769 qemu_coroutine_enter(co, acb);
4770
4771 return &acb->common;
4772 }
4773
4774 static void coroutine_fn bdrv_aio_discard_co_entry(void *opaque)
4775 {
4776 BlockDriverAIOCBCoroutine *acb = opaque;
4777 BlockDriverState *bs = acb->common.bs;
4778
4779 acb->req.error = bdrv_co_discard(bs, acb->req.sector, acb->req.nb_sectors);
4780 acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_co_em_bh, acb);
4781 qemu_bh_schedule(acb->bh);
4782 }
4783
4784 BlockDriverAIOCB *bdrv_aio_discard(BlockDriverState *bs,
4785 int64_t sector_num, int nb_sectors,
4786 BlockDriverCompletionFunc *cb, void *opaque)
4787 {
4788 Coroutine *co;
4789 BlockDriverAIOCBCoroutine *acb;
4790
4791 trace_bdrv_aio_discard(bs, sector_num, nb_sectors, opaque);
4792
4793 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4794 acb->req.sector = sector_num;
4795 acb->req.nb_sectors = nb_sectors;
4796 acb->done = NULL;
4797 co = qemu_coroutine_create(bdrv_aio_discard_co_entry);
4798 qemu_coroutine_enter(co, acb);
4799
4800 return &acb->common;
4801 }
4802
4803 void bdrv_init(void)
4804 {
4805 module_call_init(MODULE_INIT_BLOCK);
4806 }
4807
4808 void bdrv_init_with_whitelist(void)
4809 {
4810 use_bdrv_whitelist = 1;
4811 bdrv_init();
4812 }
4813
4814 void *qemu_aio_get(const AIOCBInfo *aiocb_info, BlockDriverState *bs,
4815 BlockDriverCompletionFunc *cb, void *opaque)
4816 {
4817 BlockDriverAIOCB *acb;
4818
4819 acb = g_slice_alloc(aiocb_info->aiocb_size);
4820 acb->aiocb_info = aiocb_info;
4821 acb->bs = bs;
4822 acb->cb = cb;
4823 acb->opaque = opaque;
4824 return acb;
4825 }
4826
4827 void qemu_aio_release(void *p)
4828 {
4829 BlockDriverAIOCB *acb = p;
4830 g_slice_free1(acb->aiocb_info->aiocb_size, acb);
4831 }
4832
4833 /**************************************************************/
4834 /* Coroutine block device emulation */
4835
4836 typedef struct CoroutineIOCompletion {
4837 Coroutine *coroutine;
4838 int ret;
4839 } CoroutineIOCompletion;
4840
4841 static void bdrv_co_io_em_complete(void *opaque, int ret)
4842 {
4843 CoroutineIOCompletion *co = opaque;
4844
4845 co->ret = ret;
4846 qemu_coroutine_enter(co->coroutine, NULL);
4847 }
4848
4849 static int coroutine_fn bdrv_co_io_em(BlockDriverState *bs, int64_t sector_num,
4850 int nb_sectors, QEMUIOVector *iov,
4851 bool is_write)
4852 {
4853 CoroutineIOCompletion co = {
4854 .coroutine = qemu_coroutine_self(),
4855 };
4856 BlockDriverAIOCB *acb;
4857
4858 if (is_write) {
4859 acb = bs->drv->bdrv_aio_writev(bs, sector_num, iov, nb_sectors,
4860 bdrv_co_io_em_complete, &co);
4861 } else {
4862 acb = bs->drv->bdrv_aio_readv(bs, sector_num, iov, nb_sectors,
4863 bdrv_co_io_em_complete, &co);
4864 }
4865
4866 trace_bdrv_co_io_em(bs, sector_num, nb_sectors, is_write, acb);
4867 if (!acb) {
4868 return -EIO;
4869 }
4870 qemu_coroutine_yield();
4871
4872 return co.ret;
4873 }
4874
4875 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
4876 int64_t sector_num, int nb_sectors,
4877 QEMUIOVector *iov)
4878 {
4879 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, false);
4880 }
4881
4882 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
4883 int64_t sector_num, int nb_sectors,
4884 QEMUIOVector *iov)
4885 {
4886 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, true);
4887 }
4888
4889 static void coroutine_fn bdrv_flush_co_entry(void *opaque)
4890 {
4891 RwCo *rwco = opaque;
4892
4893 rwco->ret = bdrv_co_flush(rwco->bs);
4894 }
4895
4896 int coroutine_fn bdrv_co_flush(BlockDriverState *bs)
4897 {
4898 int ret;
4899
4900 if (!bs || !bdrv_is_inserted(bs) || bdrv_is_read_only(bs)) {
4901 return 0;
4902 }
4903
4904 /* Write back cached data to the OS even with cache=unsafe */
4905 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_OS);
4906 if (bs->drv->bdrv_co_flush_to_os) {
4907 ret = bs->drv->bdrv_co_flush_to_os(bs);
4908 if (ret < 0) {
4909 return ret;
4910 }
4911 }
4912
4913 /* But don't actually force it to the disk with cache=unsafe */
4914 if (bs->open_flags & BDRV_O_NO_FLUSH) {
4915 goto flush_parent;
4916 }
4917
4918 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_DISK);
4919 if (bs->drv->bdrv_co_flush_to_disk) {
4920 ret = bs->drv->bdrv_co_flush_to_disk(bs);
4921 } else if (bs->drv->bdrv_aio_flush) {
4922 BlockDriverAIOCB *acb;
4923 CoroutineIOCompletion co = {
4924 .coroutine = qemu_coroutine_self(),
4925 };
4926
4927 acb = bs->drv->bdrv_aio_flush(bs, bdrv_co_io_em_complete, &co);
4928 if (acb == NULL) {
4929 ret = -EIO;
4930 } else {
4931 qemu_coroutine_yield();
4932 ret = co.ret;
4933 }
4934 } else {
4935 /*
4936 * Some block drivers always operate in either writethrough or unsafe
4937 * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4938 * know how the server works (because the behaviour is hardcoded or
4939 * depends on server-side configuration), so we can't ensure that
4940 * everything is safe on disk. Returning an error doesn't work because
4941 * that would break guests even if the server operates in writethrough
4942 * mode.
4943 *
4944 * Let's hope the user knows what he's doing.
4945 */
4946 ret = 0;
4947 }
4948 if (ret < 0) {
4949 return ret;
4950 }
4951
4952 /* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH
4953 * in the case of cache=unsafe, so there are no useless flushes.
4954 */
4955 flush_parent:
4956 return bdrv_co_flush(bs->file);
4957 }
4958
4959 void bdrv_invalidate_cache(BlockDriverState *bs, Error **errp)
4960 {
4961 Error *local_err = NULL;
4962 int ret;
4963
4964 if (!bs->drv) {
4965 return;
4966 }
4967
4968 if (bs->drv->bdrv_invalidate_cache) {
4969 bs->drv->bdrv_invalidate_cache(bs, &local_err);
4970 } else if (bs->file) {
4971 bdrv_invalidate_cache(bs->file, &local_err);
4972 }
4973 if (local_err) {
4974 error_propagate(errp, local_err);
4975 return;
4976 }
4977
4978 ret = refresh_total_sectors(bs, bs->total_sectors);
4979 if (ret < 0) {
4980 error_setg_errno(errp, -ret, "Could not refresh total sector count");
4981 return;
4982 }
4983 }
4984
4985 void bdrv_invalidate_cache_all(Error **errp)
4986 {
4987 BlockDriverState *bs;
4988 Error *local_err = NULL;
4989
4990 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
4991 AioContext *aio_context = bdrv_get_aio_context(bs);
4992
4993 aio_context_acquire(aio_context);
4994 bdrv_invalidate_cache(bs, &local_err);
4995 aio_context_release(aio_context);
4996 if (local_err) {
4997 error_propagate(errp, local_err);
4998 return;
4999 }
5000 }
5001 }
5002
5003 void bdrv_clear_incoming_migration_all(void)
5004 {
5005 BlockDriverState *bs;
5006
5007 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
5008 AioContext *aio_context = bdrv_get_aio_context(bs);
5009
5010 aio_context_acquire(aio_context);
5011 bs->open_flags = bs->open_flags & ~(BDRV_O_INCOMING);
5012 aio_context_release(aio_context);
5013 }
5014 }
5015
5016 int bdrv_flush(BlockDriverState *bs)
5017 {
5018 Coroutine *co;
5019 RwCo rwco = {
5020 .bs = bs,
5021 .ret = NOT_DONE,
5022 };
5023
5024 if (qemu_in_coroutine()) {
5025 /* Fast-path if already in coroutine context */
5026 bdrv_flush_co_entry(&rwco);
5027 } else {
5028 AioContext *aio_context = bdrv_get_aio_context(bs);
5029
5030 co = qemu_coroutine_create(bdrv_flush_co_entry);
5031 qemu_coroutine_enter(co, &rwco);
5032 while (rwco.ret == NOT_DONE) {
5033 aio_poll(aio_context, true);
5034 }
5035 }
5036
5037 return rwco.ret;
5038 }
5039
5040 typedef struct DiscardCo {
5041 BlockDriverState *bs;
5042 int64_t sector_num;
5043 int nb_sectors;
5044 int ret;
5045 } DiscardCo;
5046 static void coroutine_fn bdrv_discard_co_entry(void *opaque)
5047 {
5048 DiscardCo *rwco = opaque;
5049
5050 rwco->ret = bdrv_co_discard(rwco->bs, rwco->sector_num, rwco->nb_sectors);
5051 }
5052
5053 /* if no limit is specified in the BlockLimits use a default
5054 * of 32768 512-byte sectors (16 MiB) per request.
5055 */
5056 #define MAX_DISCARD_DEFAULT 32768
5057
5058 int coroutine_fn bdrv_co_discard(BlockDriverState *bs, int64_t sector_num,
5059 int nb_sectors)
5060 {
5061 int max_discard;
5062
5063 if (!bs->drv) {
5064 return -ENOMEDIUM;
5065 } else if (bdrv_check_request(bs, sector_num, nb_sectors)) {
5066 return -EIO;
5067 } else if (bs->read_only) {
5068 return -EROFS;
5069 }
5070
5071 bdrv_reset_dirty(bs, sector_num, nb_sectors);
5072
5073 /* Do nothing if disabled. */
5074 if (!(bs->open_flags & BDRV_O_UNMAP)) {
5075 return 0;
5076 }
5077
5078 if (!bs->drv->bdrv_co_discard && !bs->drv->bdrv_aio_discard) {
5079 return 0;
5080 }
5081
5082 max_discard = bs->bl.max_discard ? bs->bl.max_discard : MAX_DISCARD_DEFAULT;
5083 while (nb_sectors > 0) {
5084 int ret;
5085 int num = nb_sectors;
5086
5087 /* align request */
5088 if (bs->bl.discard_alignment &&
5089 num >= bs->bl.discard_alignment &&
5090 sector_num % bs->bl.discard_alignment) {
5091 if (num > bs->bl.discard_alignment) {
5092 num = bs->bl.discard_alignment;
5093 }
5094 num -= sector_num % bs->bl.discard_alignment;
5095 }
5096
5097 /* limit request size */
5098 if (num > max_discard) {
5099 num = max_discard;
5100 }
5101
5102 if (bs->drv->bdrv_co_discard) {
5103 ret = bs->drv->bdrv_co_discard(bs, sector_num, num);
5104 } else {
5105 BlockDriverAIOCB *acb;
5106 CoroutineIOCompletion co = {
5107 .coroutine = qemu_coroutine_self(),
5108 };
5109
5110 acb = bs->drv->bdrv_aio_discard(bs, sector_num, nb_sectors,
5111 bdrv_co_io_em_complete, &co);
5112 if (acb == NULL) {
5113 return -EIO;
5114 } else {
5115 qemu_coroutine_yield();
5116 ret = co.ret;
5117 }
5118 }
5119 if (ret && ret != -ENOTSUP) {
5120 return ret;
5121 }
5122
5123 sector_num += num;
5124 nb_sectors -= num;
5125 }
5126 return 0;
5127 }
5128
5129 int bdrv_discard(BlockDriverState *bs, int64_t sector_num, int nb_sectors)
5130 {
5131 Coroutine *co;
5132 DiscardCo rwco = {
5133 .bs = bs,
5134 .sector_num = sector_num,
5135 .nb_sectors = nb_sectors,
5136 .ret = NOT_DONE,
5137 };
5138
5139 if (qemu_in_coroutine()) {
5140 /* Fast-path if already in coroutine context */
5141 bdrv_discard_co_entry(&rwco);
5142 } else {
5143 AioContext *aio_context = bdrv_get_aio_context(bs);
5144
5145 co = qemu_coroutine_create(bdrv_discard_co_entry);
5146 qemu_coroutine_enter(co, &rwco);
5147 while (rwco.ret == NOT_DONE) {
5148 aio_poll(aio_context, true);
5149 }
5150 }
5151
5152 return rwco.ret;
5153 }
5154
5155 /**************************************************************/
5156 /* removable device support */
5157
5158 /**
5159 * Return TRUE if the media is present
5160 */
5161 int bdrv_is_inserted(BlockDriverState *bs)
5162 {
5163 BlockDriver *drv = bs->drv;
5164
5165 if (!drv)
5166 return 0;
5167 if (!drv->bdrv_is_inserted)
5168 return 1;
5169 return drv->bdrv_is_inserted(bs);
5170 }
5171
5172 /**
5173 * Return whether the media changed since the last call to this
5174 * function, or -ENOTSUP if we don't know. Most drivers don't know.
5175 */
5176 int bdrv_media_changed(BlockDriverState *bs)
5177 {
5178 BlockDriver *drv = bs->drv;
5179
5180 if (drv && drv->bdrv_media_changed) {
5181 return drv->bdrv_media_changed(bs);
5182 }
5183 return -ENOTSUP;
5184 }
5185
5186 /**
5187 * If eject_flag is TRUE, eject the media. Otherwise, close the tray
5188 */
5189 void bdrv_eject(BlockDriverState *bs, bool eject_flag)
5190 {
5191 BlockDriver *drv = bs->drv;
5192
5193 if (drv && drv->bdrv_eject) {
5194 drv->bdrv_eject(bs, eject_flag);
5195 }
5196
5197 if (bs->device_name[0] != '\0') {
5198 qapi_event_send_device_tray_moved(bdrv_get_device_name(bs),
5199 eject_flag, &error_abort);
5200 }
5201 }
5202
5203 /**
5204 * Lock or unlock the media (if it is locked, the user won't be able
5205 * to eject it manually).
5206 */
5207 void bdrv_lock_medium(BlockDriverState *bs, bool locked)
5208 {
5209 BlockDriver *drv = bs->drv;
5210
5211 trace_bdrv_lock_medium(bs, locked);
5212
5213 if (drv && drv->bdrv_lock_medium) {
5214 drv->bdrv_lock_medium(bs, locked);
5215 }
5216 }
5217
5218 /* needed for generic scsi interface */
5219
5220 int bdrv_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
5221 {
5222 BlockDriver *drv = bs->drv;
5223
5224 if (drv && drv->bdrv_ioctl)
5225 return drv->bdrv_ioctl(bs, req, buf);
5226 return -ENOTSUP;
5227 }
5228
5229 BlockDriverAIOCB *bdrv_aio_ioctl(BlockDriverState *bs,
5230 unsigned long int req, void *buf,
5231 BlockDriverCompletionFunc *cb, void *opaque)
5232 {
5233 BlockDriver *drv = bs->drv;
5234
5235 if (drv && drv->bdrv_aio_ioctl)
5236 return drv->bdrv_aio_ioctl(bs, req, buf, cb, opaque);
5237 return NULL;
5238 }
5239
5240 void bdrv_set_guest_block_size(BlockDriverState *bs, int align)
5241 {
5242 bs->guest_block_size = align;
5243 }
5244
5245 void *qemu_blockalign(BlockDriverState *bs, size_t size)
5246 {
5247 return qemu_memalign(bdrv_opt_mem_align(bs), size);
5248 }
5249
5250 /*
5251 * Check if all memory in this vector is sector aligned.
5252 */
5253 bool bdrv_qiov_is_aligned(BlockDriverState *bs, QEMUIOVector *qiov)
5254 {
5255 int i;
5256 size_t alignment = bdrv_opt_mem_align(bs);
5257
5258 for (i = 0; i < qiov->niov; i++) {
5259 if ((uintptr_t) qiov->iov[i].iov_base % alignment) {
5260 return false;
5261 }
5262 if (qiov->iov[i].iov_len % alignment) {
5263 return false;
5264 }
5265 }
5266
5267 return true;
5268 }
5269
5270 BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs, int granularity,
5271 Error **errp)
5272 {
5273 int64_t bitmap_size;
5274 BdrvDirtyBitmap *bitmap;
5275
5276 assert((granularity & (granularity - 1)) == 0);
5277
5278 granularity >>= BDRV_SECTOR_BITS;
5279 assert(granularity);
5280 bitmap_size = bdrv_getlength(bs);
5281 if (bitmap_size < 0) {
5282 error_setg_errno(errp, -bitmap_size, "could not get length of device");
5283 errno = -bitmap_size;
5284 return NULL;
5285 }
5286 bitmap_size >>= BDRV_SECTOR_BITS;
5287 bitmap = g_malloc0(sizeof(BdrvDirtyBitmap));
5288 bitmap->bitmap = hbitmap_alloc(bitmap_size, ffs(granularity) - 1);
5289 QLIST_INSERT_HEAD(&bs->dirty_bitmaps, bitmap, list);
5290 return bitmap;
5291 }
5292
5293 void bdrv_release_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
5294 {
5295 BdrvDirtyBitmap *bm, *next;
5296 QLIST_FOREACH_SAFE(bm, &bs->dirty_bitmaps, list, next) {
5297 if (bm == bitmap) {
5298 QLIST_REMOVE(bitmap, list);
5299 hbitmap_free(bitmap->bitmap);
5300 g_free(bitmap);
5301 return;
5302 }
5303 }
5304 }
5305
5306 BlockDirtyInfoList *bdrv_query_dirty_bitmaps(BlockDriverState *bs)
5307 {
5308 BdrvDirtyBitmap *bm;
5309 BlockDirtyInfoList *list = NULL;
5310 BlockDirtyInfoList **plist = &list;
5311
5312 QLIST_FOREACH(bm, &bs->dirty_bitmaps, list) {
5313 BlockDirtyInfo *info = g_malloc0(sizeof(BlockDirtyInfo));
5314 BlockDirtyInfoList *entry = g_malloc0(sizeof(BlockDirtyInfoList));
5315 info->count = bdrv_get_dirty_count(bs, bm);
5316 info->granularity =
5317 ((int64_t) BDRV_SECTOR_SIZE << hbitmap_granularity(bm->bitmap));
5318 entry->value = info;
5319 *plist = entry;
5320 plist = &entry->next;
5321 }
5322
5323 return list;
5324 }
5325
5326 int bdrv_get_dirty(BlockDriverState *bs, BdrvDirtyBitmap *bitmap, int64_t sector)
5327 {
5328 if (bitmap) {
5329 return hbitmap_get(bitmap->bitmap, sector);
5330 } else {
5331 return 0;
5332 }
5333 }
5334
5335 void bdrv_dirty_iter_init(BlockDriverState *bs,
5336 BdrvDirtyBitmap *bitmap, HBitmapIter *hbi)
5337 {
5338 hbitmap_iter_init(hbi, bitmap->bitmap, 0);
5339 }
5340
5341 void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector,
5342 int nr_sectors)
5343 {
5344 BdrvDirtyBitmap *bitmap;
5345 QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
5346 hbitmap_set(bitmap->bitmap, cur_sector, nr_sectors);
5347 }
5348 }
5349
5350 void bdrv_reset_dirty(BlockDriverState *bs, int64_t cur_sector, int nr_sectors)
5351 {
5352 BdrvDirtyBitmap *bitmap;
5353 QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
5354 hbitmap_reset(bitmap->bitmap, cur_sector, nr_sectors);
5355 }
5356 }
5357
5358 int64_t bdrv_get_dirty_count(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
5359 {
5360 return hbitmap_count(bitmap->bitmap);
5361 }
5362
5363 /* Get a reference to bs */
5364 void bdrv_ref(BlockDriverState *bs)
5365 {
5366 bs->refcnt++;
5367 }
5368
5369 /* Release a previously grabbed reference to bs.
5370 * If after releasing, reference count is zero, the BlockDriverState is
5371 * deleted. */
5372 void bdrv_unref(BlockDriverState *bs)
5373 {
5374 assert(bs->refcnt > 0);
5375 if (--bs->refcnt == 0) {
5376 bdrv_delete(bs);
5377 }
5378 }
5379
5380 struct BdrvOpBlocker {
5381 Error *reason;
5382 QLIST_ENTRY(BdrvOpBlocker) list;
5383 };
5384
5385 bool bdrv_op_is_blocked(BlockDriverState *bs, BlockOpType op, Error **errp)
5386 {
5387 BdrvOpBlocker *blocker;
5388 assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
5389 if (!QLIST_EMPTY(&bs->op_blockers[op])) {
5390 blocker = QLIST_FIRST(&bs->op_blockers[op]);
5391 if (errp) {
5392 error_setg(errp, "Device '%s' is busy: %s",
5393 bs->device_name, error_get_pretty(blocker->reason));
5394 }
5395 return true;
5396 }
5397 return false;
5398 }
5399
5400 void bdrv_op_block(BlockDriverState *bs, BlockOpType op, Error *reason)
5401 {
5402 BdrvOpBlocker *blocker;
5403 assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
5404
5405 blocker = g_malloc0(sizeof(BdrvOpBlocker));
5406 blocker->reason = reason;
5407 QLIST_INSERT_HEAD(&bs->op_blockers[op], blocker, list);
5408 }
5409
5410 void bdrv_op_unblock(BlockDriverState *bs, BlockOpType op, Error *reason)
5411 {
5412 BdrvOpBlocker *blocker, *next;
5413 assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
5414 QLIST_FOREACH_SAFE(blocker, &bs->op_blockers[op], list, next) {
5415 if (blocker->reason == reason) {
5416 QLIST_REMOVE(blocker, list);
5417 g_free(blocker);
5418 }
5419 }
5420 }
5421
5422 void bdrv_op_block_all(BlockDriverState *bs, Error *reason)
5423 {
5424 int i;
5425 for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
5426 bdrv_op_block(bs, i, reason);
5427 }
5428 }
5429
5430 void bdrv_op_unblock_all(BlockDriverState *bs, Error *reason)
5431 {
5432 int i;
5433 for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
5434 bdrv_op_unblock(bs, i, reason);
5435 }
5436 }
5437
5438 bool bdrv_op_blocker_is_empty(BlockDriverState *bs)
5439 {
5440 int i;
5441
5442 for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
5443 if (!QLIST_EMPTY(&bs->op_blockers[i])) {
5444 return false;
5445 }
5446 }
5447 return true;
5448 }
5449
5450 void bdrv_iostatus_enable(BlockDriverState *bs)
5451 {
5452 bs->iostatus_enabled = true;
5453 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
5454 }
5455
5456 /* The I/O status is only enabled if the drive explicitly
5457 * enables it _and_ the VM is configured to stop on errors */
5458 bool bdrv_iostatus_is_enabled(const BlockDriverState *bs)
5459 {
5460 return (bs->iostatus_enabled &&
5461 (bs->on_write_error == BLOCKDEV_ON_ERROR_ENOSPC ||
5462 bs->on_write_error == BLOCKDEV_ON_ERROR_STOP ||
5463 bs->on_read_error == BLOCKDEV_ON_ERROR_STOP));
5464 }
5465
5466 void bdrv_iostatus_disable(BlockDriverState *bs)
5467 {
5468 bs->iostatus_enabled = false;
5469 }
5470
5471 void bdrv_iostatus_reset(BlockDriverState *bs)
5472 {
5473 if (bdrv_iostatus_is_enabled(bs)) {
5474 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
5475 if (bs->job) {
5476 block_job_iostatus_reset(bs->job);
5477 }
5478 }
5479 }
5480
5481 void bdrv_iostatus_set_err(BlockDriverState *bs, int error)
5482 {
5483 assert(bdrv_iostatus_is_enabled(bs));
5484 if (bs->iostatus == BLOCK_DEVICE_IO_STATUS_OK) {
5485 bs->iostatus = error == ENOSPC ? BLOCK_DEVICE_IO_STATUS_NOSPACE :
5486 BLOCK_DEVICE_IO_STATUS_FAILED;
5487 }
5488 }
5489
5490 void
5491 bdrv_acct_start(BlockDriverState *bs, BlockAcctCookie *cookie, int64_t bytes,
5492 enum BlockAcctType type)
5493 {
5494 assert(type < BDRV_MAX_IOTYPE);
5495
5496 cookie->bytes = bytes;
5497 cookie->start_time_ns = get_clock();
5498 cookie->type = type;
5499 }
5500
5501 void
5502 bdrv_acct_done(BlockDriverState *bs, BlockAcctCookie *cookie)
5503 {
5504 assert(cookie->type < BDRV_MAX_IOTYPE);
5505
5506 bs->nr_bytes[cookie->type] += cookie->bytes;
5507 bs->nr_ops[cookie->type]++;
5508 bs->total_time_ns[cookie->type] += get_clock() - cookie->start_time_ns;
5509 }
5510
5511 void bdrv_img_create(const char *filename, const char *fmt,
5512 const char *base_filename, const char *base_fmt,
5513 char *options, uint64_t img_size, int flags,
5514 Error **errp, bool quiet)
5515 {
5516 QemuOptsList *create_opts = NULL;
5517 QemuOpts *opts = NULL;
5518 const char *backing_fmt, *backing_file;
5519 int64_t size;
5520 BlockDriver *drv, *proto_drv;
5521 BlockDriver *backing_drv = NULL;
5522 Error *local_err = NULL;
5523 int ret = 0;
5524
5525 /* Find driver and parse its options */
5526 drv = bdrv_find_format(fmt);
5527 if (!drv) {
5528 error_setg(errp, "Unknown file format '%s'", fmt);
5529 return;
5530 }
5531
5532 proto_drv = bdrv_find_protocol(filename, true);
5533 if (!proto_drv) {
5534 error_setg(errp, "Unknown protocol '%s'", filename);
5535 return;
5536 }
5537
5538 create_opts = qemu_opts_append(create_opts, drv->create_opts);
5539 create_opts = qemu_opts_append(create_opts, proto_drv->create_opts);
5540
5541 /* Create parameter list with default values */
5542 opts = qemu_opts_create(create_opts, NULL, 0, &error_abort);
5543 qemu_opt_set_number(opts, BLOCK_OPT_SIZE, img_size);
5544
5545 /* Parse -o options */
5546 if (options) {
5547 if (qemu_opts_do_parse(opts, options, NULL) != 0) {
5548 error_setg(errp, "Invalid options for file format '%s'", fmt);
5549 goto out;
5550 }
5551 }
5552
5553 if (base_filename) {
5554 if (qemu_opt_set(opts, BLOCK_OPT_BACKING_FILE, base_filename)) {
5555 error_setg(errp, "Backing file not supported for file format '%s'",
5556 fmt);
5557 goto out;
5558 }
5559 }
5560
5561 if (base_fmt) {
5562 if (qemu_opt_set(opts, BLOCK_OPT_BACKING_FMT, base_fmt)) {
5563 error_setg(errp, "Backing file format not supported for file "
5564 "format '%s'", fmt);
5565 goto out;
5566 }
5567 }
5568
5569 backing_file = qemu_opt_get(opts, BLOCK_OPT_BACKING_FILE);
5570 if (backing_file) {
5571 if (!strcmp(filename, backing_file)) {
5572 error_setg(errp, "Error: Trying to create an image with the "
5573 "same filename as the backing file");
5574 goto out;
5575 }
5576 }
5577
5578 backing_fmt = qemu_opt_get(opts, BLOCK_OPT_BACKING_FMT);
5579 if (backing_fmt) {
5580 backing_drv = bdrv_find_format(backing_fmt);
5581 if (!backing_drv) {
5582 error_setg(errp, "Unknown backing file format '%s'",
5583 backing_fmt);
5584 goto out;
5585 }
5586 }
5587
5588 // The size for the image must always be specified, with one exception:
5589 // If we are using a backing file, we can obtain the size from there
5590 size = qemu_opt_get_size(opts, BLOCK_OPT_SIZE, 0);
5591 if (size == -1) {
5592 if (backing_file) {
5593 BlockDriverState *bs;
5594 uint64_t size;
5595 int back_flags;
5596
5597 /* backing files always opened read-only */
5598 back_flags =
5599 flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
5600
5601 bs = NULL;
5602 ret = bdrv_open(&bs, backing_file, NULL, NULL, back_flags,
5603 backing_drv, &local_err);
5604 if (ret < 0) {
5605 error_setg_errno(errp, -ret, "Could not open '%s': %s",
5606 backing_file,
5607 error_get_pretty(local_err));
5608 error_free(local_err);
5609 local_err = NULL;
5610 goto out;
5611 }
5612 bdrv_get_geometry(bs, &size);
5613 size *= 512;
5614
5615 qemu_opt_set_number(opts, BLOCK_OPT_SIZE, size);
5616
5617 bdrv_unref(bs);
5618 } else {
5619 error_setg(errp, "Image creation needs a size parameter");
5620 goto out;
5621 }
5622 }
5623
5624 if (!quiet) {
5625 printf("Formatting '%s', fmt=%s ", filename, fmt);
5626 qemu_opts_print(opts);
5627 puts("");
5628 }
5629
5630 ret = bdrv_create(drv, filename, opts, &local_err);
5631
5632 if (ret == -EFBIG) {
5633 /* This is generally a better message than whatever the driver would
5634 * deliver (especially because of the cluster_size_hint), since that
5635 * is most probably not much different from "image too large". */
5636 const char *cluster_size_hint = "";
5637 if (qemu_opt_get_size(opts, BLOCK_OPT_CLUSTER_SIZE, 0)) {
5638 cluster_size_hint = " (try using a larger cluster size)";
5639 }
5640 error_setg(errp, "The image size is too large for file format '%s'"
5641 "%s", fmt, cluster_size_hint);
5642 error_free(local_err);
5643 local_err = NULL;
5644 }
5645
5646 out:
5647 qemu_opts_del(opts);
5648 qemu_opts_free(create_opts);
5649 if (local_err) {
5650 error_propagate(errp, local_err);
5651 }
5652 }
5653
5654 AioContext *bdrv_get_aio_context(BlockDriverState *bs)
5655 {
5656 return bs->aio_context;
5657 }
5658
5659 void bdrv_detach_aio_context(BlockDriverState *bs)
5660 {
5661 if (!bs->drv) {
5662 return;
5663 }
5664
5665 if (bs->io_limits_enabled) {
5666 throttle_detach_aio_context(&bs->throttle_state);
5667 }
5668 if (bs->drv->bdrv_detach_aio_context) {
5669 bs->drv->bdrv_detach_aio_context(bs);
5670 }
5671 if (bs->file) {
5672 bdrv_detach_aio_context(bs->file);
5673 }
5674 if (bs->backing_hd) {
5675 bdrv_detach_aio_context(bs->backing_hd);
5676 }
5677
5678 bs->aio_context = NULL;
5679 }
5680
5681 void bdrv_attach_aio_context(BlockDriverState *bs,
5682 AioContext *new_context)
5683 {
5684 if (!bs->drv) {
5685 return;
5686 }
5687
5688 bs->aio_context = new_context;
5689
5690 if (bs->backing_hd) {
5691 bdrv_attach_aio_context(bs->backing_hd, new_context);
5692 }
5693 if (bs->file) {
5694 bdrv_attach_aio_context(bs->file, new_context);
5695 }
5696 if (bs->drv->bdrv_attach_aio_context) {
5697 bs->drv->bdrv_attach_aio_context(bs, new_context);
5698 }
5699 if (bs->io_limits_enabled) {
5700 throttle_attach_aio_context(&bs->throttle_state, new_context);
5701 }
5702 }
5703
5704 void bdrv_set_aio_context(BlockDriverState *bs, AioContext *new_context)
5705 {
5706 bdrv_drain_all(); /* ensure there are no in-flight requests */
5707
5708 bdrv_detach_aio_context(bs);
5709
5710 /* This function executes in the old AioContext so acquire the new one in
5711 * case it runs in a different thread.
5712 */
5713 aio_context_acquire(new_context);
5714 bdrv_attach_aio_context(bs, new_context);
5715 aio_context_release(new_context);
5716 }
5717
5718 void bdrv_add_before_write_notifier(BlockDriverState *bs,
5719 NotifierWithReturn *notifier)
5720 {
5721 notifier_with_return_list_add(&bs->before_write_notifiers, notifier);
5722 }
5723
5724 int bdrv_amend_options(BlockDriverState *bs, QemuOpts *opts)
5725 {
5726 if (!bs->drv->bdrv_amend_options) {
5727 return -ENOTSUP;
5728 }
5729 return bs->drv->bdrv_amend_options(bs, opts);
5730 }
5731
5732 /* This function will be called by the bdrv_recurse_is_first_non_filter method
5733 * of block filter and by bdrv_is_first_non_filter.
5734 * It is used to test if the given bs is the candidate or recurse more in the
5735 * node graph.
5736 */
5737 bool bdrv_recurse_is_first_non_filter(BlockDriverState *bs,
5738 BlockDriverState *candidate)
5739 {
5740 /* return false if basic checks fails */
5741 if (!bs || !bs->drv) {
5742 return false;
5743 }
5744
5745 /* the code reached a non block filter driver -> check if the bs is
5746 * the same as the candidate. It's the recursion termination condition.
5747 */
5748 if (!bs->drv->is_filter) {
5749 return bs == candidate;
5750 }
5751 /* Down this path the driver is a block filter driver */
5752
5753 /* If the block filter recursion method is defined use it to recurse down
5754 * the node graph.
5755 */
5756 if (bs->drv->bdrv_recurse_is_first_non_filter) {
5757 return bs->drv->bdrv_recurse_is_first_non_filter(bs, candidate);
5758 }
5759
5760 /* the driver is a block filter but don't allow to recurse -> return false
5761 */
5762 return false;
5763 }
5764
5765 /* This function checks if the candidate is the first non filter bs down it's
5766 * bs chain. Since we don't have pointers to parents it explore all bs chains
5767 * from the top. Some filters can choose not to pass down the recursion.
5768 */
5769 bool bdrv_is_first_non_filter(BlockDriverState *candidate)
5770 {
5771 BlockDriverState *bs;
5772
5773 /* walk down the bs forest recursively */
5774 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
5775 bool perm;
5776
5777 /* try to recurse in this top level bs */
5778 perm = bdrv_recurse_is_first_non_filter(bs, candidate);
5779
5780 /* candidate is the first non filter */
5781 if (perm) {
5782 return true;
5783 }
5784 }
5785
5786 return false;
5787 }
5788
5789 BlockDriverState *check_to_replace_node(const char *node_name, Error **errp)
5790 {
5791 BlockDriverState *to_replace_bs = bdrv_find_node(node_name);
5792 if (!to_replace_bs) {
5793 error_setg(errp, "Node name '%s' not found", node_name);
5794 return NULL;
5795 }
5796
5797 if (bdrv_op_is_blocked(to_replace_bs, BLOCK_OP_TYPE_REPLACE, errp)) {
5798 return NULL;
5799 }
5800
5801 /* We don't want arbitrary node of the BDS chain to be replaced only the top
5802 * most non filter in order to prevent data corruption.
5803 * Another benefit is that this tests exclude backing files which are
5804 * blocked by the backing blockers.
5805 */
5806 if (!bdrv_is_first_non_filter(to_replace_bs)) {
5807 error_setg(errp, "Only top most non filter can be replaced");
5808 return NULL;
5809 }
5810
5811 return to_replace_bs;
5812 }
5813
5814 void bdrv_io_plug(BlockDriverState *bs)
5815 {
5816 BlockDriver *drv = bs->drv;
5817 if (drv && drv->bdrv_io_plug) {
5818 drv->bdrv_io_plug(bs);
5819 } else if (bs->file) {
5820 bdrv_io_plug(bs->file);
5821 }
5822 }
5823
5824 void bdrv_io_unplug(BlockDriverState *bs)
5825 {
5826 BlockDriver *drv = bs->drv;
5827 if (drv && drv->bdrv_io_unplug) {
5828 drv->bdrv_io_unplug(bs);
5829 } else if (bs->file) {
5830 bdrv_io_unplug(bs->file);
5831 }
5832 }
5833
5834 void bdrv_flush_io_queue(BlockDriverState *bs)
5835 {
5836 BlockDriver *drv = bs->drv;
5837 if (drv && drv->bdrv_flush_io_queue) {
5838 drv->bdrv_flush_io_queue(bs);
5839 } else if (bs->file) {
5840 bdrv_flush_io_queue(bs->file);
5841 }
5842 }