board/Arcturus/ucp1020/spl.c

   1 /*
   2  * Copyright 2013-2015 Arcturus Networks, Inc.
   3  *           http://www.arcturusnetworks.com/products/ucp1020/
   4  * based on board/freescale/p1_p2_rdb_pc/spl.c
   5  * original copyright follows:
   6  * Copyright 2013 Freescale Semiconductor, Inc.
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #include <common.h>
  12 #include <console.h>
  13 #include <environment.h>
  14 #include <ns16550.h>
  15 #include <malloc.h>
  16 #include <mmc.h>
  17 #include <nand.h>
  18 #include <i2c.h>
  19 #include <fsl_esdhc.h>
  20 #include <spi_flash.h>
  21
  22 DECLARE_GLOBAL_DATA_PTR;
  23
  24 static const u32 sysclk_tbl[] = {
  25         66666000, 7499900, 83332500, 8999900,
  26         99999000, 11111000, 12499800, 13333200
  27 };
  28
  29 phys_size_t get_effective_memsize(void)
  30 {
  31         return CONFIG_SYS_L2_SIZE;
  32 }
  33
  34 void board_init_f(ulong bootflag)
  35 {
  36         u32 plat_ratio, bus_clk;
  37         ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
  38
  39         console_init_f();
  40
  41         /* Set pmuxcr to allow both i2c1 and i2c2 */
  42         setbits_be32(&gur->pmuxcr, in_be32(&gur->pmuxcr) | 0x1000);
  43         setbits_be32(&gur->pmuxcr,
  44                      in_be32(&gur->pmuxcr) | MPC85xx_PMUXCR_SD_DATA);
  45
  46         /* Read back the register to synchronize the write. */
  47         in_be32(&gur->pmuxcr);
  48
  49 #ifdef CONFIG_SPL_SPI_BOOT
  50         clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SD_DATA);
  51 #endif
  52
  53         /* initialize selected port with appropriate baud rate */
  54         plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
  55         plat_ratio >>= 1;
  56         bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
  57         gd->bus_clk = bus_clk;
  58
  59         NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
  60                      bus_clk / 16 / CONFIG_BAUDRATE);
  61 #ifdef CONFIG_SPL_MMC_BOOT
  62         puts("\nSD boot...\n");
  63 #elif defined(CONFIG_SPL_SPI_BOOT)
  64         puts("\nSPI Flash boot...\n");
  65 #endif
  66
  67         /* copy code to RAM and jump to it - this should not return */
  68         /* NOTE - code has to be copied out of NAND buffer before
  69          * other blocks can be read.
  70          */
  71         relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
  72 }
  73
  74 void board_init_r(gd_t *gd, ulong dest_addr)
  75 {
  76         /* Pointer is writable since we allocated a register for it */
  77         gd = (gd_t *)CONFIG_SPL_GD_ADDR;
  78         bd_t *bd;
  79
  80         memset(gd, 0, sizeof(gd_t));
  81         bd = (bd_t *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t));
  82         memset(bd, 0, sizeof(bd_t));
  83         gd->bd = bd;
  84         bd->bi_memstart = CONFIG_SYS_INIT_L2_ADDR;
  85         bd->bi_memsize = CONFIG_SYS_L2_SIZE;
  86
  87         arch_cpu_init();
  88         get_clocks();
  89         mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
  90                         CONFIG_SPL_RELOC_MALLOC_SIZE);
  91
  92 #ifndef CONFIG_SPL_NAND_BOOT
  93         env_init();
  94 #endif
  95 #ifdef CONFIG_SPL_MMC_BOOT
  96         mmc_initialize(bd);
  97 #endif
  98         /* relocate environment function pointers etc. */
  99 #ifdef CONFIG_SPL_NAND_BOOT
 100         nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
 101                             (uchar *)CONFIG_ENV_ADDR);
 102         gd->env_addr = (ulong)(CONFIG_ENV_ADDR);
 103         gd->env_valid = ENV_VALID;
 104 #else
 105         env_relocate();
 106 #endif
 107
 108 #ifdef CONFIG_SYS_I2C
 109         i2c_init_all();
 110 #else
 111         i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 112 #endif
 113
 114         dram_init();
 115 #ifdef CONFIG_SPL_NAND_BOOT
 116         puts("Tertiary program loader running in sram...");
 117 #else
 118         puts("Second program loader running in sram...\n");
 119 #endif
 120
 121 #ifdef CONFIG_SPL_MMC_BOOT
 122         mmc_boot();
 123 #elif defined(CONFIG_SPL_NAND_BOOT)
 124         nand_boot();
 125 #endif
 126 }