board/actux1/actux1.c

   1 /*
   2  * (C) Copyright 2007
   3  * Michael Schwingen, michael@schwingen.org
   4  *
   5  * (C) Copyright 2006
   6  * Stefan Roese, DENX Software Engineering, sr@denx.de.
   7  *
   8  * (C) Copyright 2002
   9  * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
  10  *
  11  * (C) Copyright 2002
  12  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
  13  * Marius Groeger <mgroeger@sysgo.de>
  14  *
  15  * See file CREDITS for list of people who contributed to this
  16  * project.
  17  *
  18  * This program is free software; you can redistribute it and/or
  19  * modify it under the terms of the GNU General Public License as
  20  * published by the Free Software Foundation; either version 2 of
  21  * the License, or (at your option) any later version.
  22  *
  23  * This program is distributed in the hope that it will be useful,
  24  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  25  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  26  * GNU General Public License for more details.
  27  *
  28  * You should have received a copy of the GNU General Public License
  29  * along with this program; if not, write to the Free Software
  30  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  31  * MA 02111-1307 USA
  32  */
  33
  34 #include <common.h>
  35 #include <command.h>
  36 #include <malloc.h>
  37 #include <asm/arch/ixp425.h>
  38 #include <asm/io.h>
  39 #include <miiphy.h>
  40
  41 #include "actux1_hw.h"
  42
  43 DECLARE_GLOBAL_DATA_PTR;
  44
  45 int board_init (void)
  46 {
  47         gd->bd->bi_arch_number = MACH_TYPE_ACTUX1;
  48
  49         /* adress of boot parameters */
  50         gd->bd->bi_boot_params = 0x00000100;
  51
  52         GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_IORST);
  53         GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_IORST);
  54
  55         /* Setup GPIO's for PCI INTA */
  56         GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_PCI1_INTA);
  57         GPIO_INT_ACT_LOW_SET (CONFIG_SYS_GPIO_PCI1_INTA);
  58
  59         /* Setup GPIO's for 33MHz clock output */
  60         GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_PCI_CLK);
  61         GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_EXTBUS_CLK);
  62         *IXP425_GPIO_GPCLKR = 0x011001FF;
  63
  64         /* CS5: Debug port */
  65         *IXP425_EXP_CS5 = 0x9d520003;
  66         /* CS6: HwRel */
  67         *IXP425_EXP_CS6 = 0x81860001;
  68         /* CS7: LEDs */
  69         *IXP425_EXP_CS7 = 0x80900003;
  70
  71         udelay (533);
  72         GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_IORST);
  73
  74         ACTUX1_LED1 (2);
  75         ACTUX1_LED2 (2);
  76         ACTUX1_LED3 (0);
  77         ACTUX1_LED4 (0);
  78         ACTUX1_LED5 (0);
  79         ACTUX1_LED6 (0);
  80         ACTUX1_LED7 (0);
  81
  82         ACTUX1_HS (ACTUX1_HS_DCD);
  83
  84         return 0;
  85 }
  86
  87 /*
  88  * Check Board Identity
  89  */
  90 int checkboard (void)
  91 {
  92         char buf[64];
  93         int i = getenv_f("serial#", buf, sizeof(buf));
  94
  95         puts ("Board: AcTux-1 rev.");
  96         putc (ACTUX1_BOARDREL + 'A' - 1);
  97
  98         if (i > 0) {
  99                 puts(", serial# ");
 100                 puts(buf);
 101         }
 102         putc ('\n');
 103
 104         return (0);
 105 }
 106
 107 /*************************************************************************
 108  * get_board_rev() - setup to pass kernel board revision information
 109  * 0 = reserved
 110  * 1 = Rev. A
 111  * 2 = Rev. B
 112  *************************************************************************/
 113 u32 get_board_rev (void)
 114 {
 115         return ACTUX1_BOARDREL;
 116 }
 117
 118 int dram_init (void)
 119 {
 120         gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 121         gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 122
 123         return (0);
 124 }
 125
 126 #if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI)
 127 extern struct pci_controller hose;
 128 extern void pci_ixp_init (struct pci_controller *hose);
 129
 130 void pci_init_board (void)
 131 {
 132         extern void pci_ixp_init (struct pci_controller *hose);
 133         pci_ixp_init (&hose);
 134 }
 135 #endif
 136
 137 void reset_phy (void)
 138 {
 139         u16 id1, id2;
 140
 141         /* initialize the PHY */
 142         miiphy_reset ("NPE0", CONFIG_PHY_ADDR);
 143
 144         miiphy_read ("NPE0", CONFIG_PHY_ADDR, MII_PHYSID1, &id1);
 145         miiphy_read ("NPE0", CONFIG_PHY_ADDR, MII_PHYSID2, &id2);
 146
 147         id2 &= 0xFFF0;          /* mask out revision bits */
 148
 149         if (id1 == 0x13 && id2 == 0x78e0) {
 150                 /*
 151                  * LXT971/LXT972 PHY: set LED outputs:
 152                  * LED1(green) = Link/ACT,
 153                  * LED2 (unused) = LINK,
 154                  * LED3(red) = Coll
 155                  */
 156                 miiphy_write ("NPE0", CONFIG_PHY_ADDR, 20, 0xD432);
 157         } else if (id1 == 0x143 && id2 == 0xbc30) {
 158                 /* BCM5241: default values are OK */
 159         } else
 160                 printf ("unknown ethernet PHY ID: %x %x\n", id1, id2);
 161 }