board/actux3/actux3.c

   1 /*
   2  * (C) Copyright 2007
   3  * Michael Schwingen, michael@schwingen.org
   4  *
   5  * (C) Copyright 2006
   6  * Stefan Roese, DENX Software Engineering, sr@denx.de.
   7  *
   8  * (C) Copyright 2002
   9  * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
  10  *
  11  * (C) Copyright 2002
  12  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
  13  * Marius Groeger <mgroeger@sysgo.de>
  14  *
  15  * See file CREDITS for list of people who contributed to this
  16  * project.
  17  *
  18  * This program is free software; you can redistribute it and/or
  19  * modify it under the terms of the GNU General Public License as
  20  * published by the Free Software Foundation; either version 2 of
  21  * the License, or (at your option) any later version.
  22  *
  23  * This program is distributed in the hope that it will be useful,
  24  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  25  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  26  * GNU General Public License for more details.
  27  *
  28  * You should have received a copy of the GNU General Public License
  29  * along with this program; if not, write to the Free Software
  30  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  31  * MA 02111-1307 USA
  32  */
  33
  34 #include <common.h>
  35 #include <command.h>
  36 #include <malloc.h>
  37 #include <asm/arch/ixp425.h>
  38 #include <asm/io.h>
  39
  40 #include <miiphy.h>
  41
  42 #include "actux3_hw.h"
  43
  44 DECLARE_GLOBAL_DATA_PTR;
  45
  46 int board_init (void)
  47 {
  48         gd->bd->bi_arch_number = MACH_TYPE_ACTUX3;
  49
  50         /* adress of boot parameters */
  51         gd->bd->bi_boot_params = 0x00000100;
  52
  53         GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_IORST);
  54         GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_ETHRST);
  55         GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_DSR);
  56         GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_DCD);
  57         GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_LED5_GN);
  58         GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_LED6_RT);
  59         GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_LED6_GN);
  60
  61         GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_IORST);
  62         GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_ETHRST);
  63
  64         GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_DSR);
  65         GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_DCD);
  66
  67         GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_LED5_GN);
  68         GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_LED6_RT);
  69         GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_LED6_GN);
  70
  71         /*
  72          * Setup GPIO's for Interrupt inputs
  73          */
  74         GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_DBGINT);
  75         GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_ETHINT);
  76
  77         /*
  78          * Setup GPIO's for 33MHz clock output
  79          */
  80         GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_PCI_CLK);
  81         GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_EXTBUS_CLK);
  82         *IXP425_GPIO_GPCLKR = 0x011001FF;
  83
  84         /* CS1: IPAC-X */
  85         *IXP425_EXP_CS1 = 0x94d10013;
  86         /* CS5: Debug port */
  87         *IXP425_EXP_CS5 = 0x9d520003;
  88         /* CS6: Release/Option register */
  89         *IXP425_EXP_CS6 = 0x81860001;
  90         /* CS7: LEDs */
  91         *IXP425_EXP_CS7 = 0x80900003;
  92
  93         udelay (533);
  94         GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_IORST);
  95         GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_ETHRST);
  96
  97         ACTUX3_LED1_RT (1);
  98         ACTUX3_LED1_GN (0);
  99         ACTUX3_LED2_RT (0);
 100         ACTUX3_LED2_GN (0);
 101         ACTUX3_LED3_RT (0);
 102         ACTUX3_LED3_GN (0);
 103         ACTUX3_LED4_GN (0);
 104         ACTUX3_LED5_RT (0);
 105
 106         return 0;
 107 }
 108
 109 /*
 110  * Check Board Identity
 111  */
 112 int checkboard (void)
 113 {
 114         char buf[64];
 115         int i = getenv_f("serial#", buf, sizeof(buf));
 116
 117         puts ("Board: AcTux-3 rev.");
 118         putc (ACTUX3_BOARDREL + 'A' - 1);
 119
 120         if (i > 0) {
 121                 puts (", serial# ");
 122                 puts (buf);
 123         }
 124         putc ('\n');
 125
 126         return (0);
 127 }
 128
 129 /*************************************************************************
 130  * get_board_rev() - setup to pass kernel board revision information
 131  * 0 = reserved
 132  * 1 = Rev. A
 133  * 2 = Rev. B
 134  *************************************************************************/
 135 u32 get_board_rev (void)
 136 {
 137         return ACTUX3_BOARDREL;
 138 }
 139
 140 int dram_init (void)
 141 {
 142         gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 143         gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 144
 145         return (0);
 146 }
 147
 148 void reset_phy (void)
 149 {
 150         int i;
 151
 152         /* initialize the PHY */
 153         miiphy_reset ("NPE0", CONFIG_PHY_ADDR);
 154
 155         /* all LED outputs = Link/Act */
 156         miiphy_write ("NPE0", CONFIG_PHY_ADDR, 0x16, 0x0AAA);
 157
 158         /*
 159          * The Marvell 88E6060 switch comes up with all ports disabled.
 160          * set all ethernet switch ports to forwarding state
 161         */
 162         for (i = 1; i <= 5; i++)
 163                 miiphy_write ("NPE0", CONFIG_PHY_ADDR + 8 + i, 0x04, 0x03);
 164
 165 }