2 * Copyright (C) 2004 PaulReynolds@lhsolutions.com
5 * Stefan Roese, DENX Software Engineering, sr@denx.de.
7 * See file CREDITS for list of people who contributed to this
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of
13 * the License, or (at your option) any later version.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
29 #include <asm/processor.h>
30 #include <spd_sdram.h>
31 #include <ppc4xx_enet.h>
33 DECLARE_GLOBAL_DATA_PTR
;
35 #define BOOT_SMALL_FLASH 32 /* 00100000 */
36 #define FLASH_ONBD_N 2 /* 00000010 */
37 #define FLASH_SRAM_SEL 1 /* 00000001 */
39 long int fixed_sdram (void);
40 void fpga_init (void);
42 int board_early_init_f (void)
45 unsigned char *fpga_base
= (unsigned char *) CFG_FPGA_BASE
;
46 unsigned char switch_status
;
47 unsigned long cs0_base
;
48 unsigned long cs0_size
;
49 unsigned long cs0_twt
;
50 unsigned long cs2_base
;
51 unsigned long cs2_size
;
52 unsigned long cs2_twt
;
54 /*-------------------------------------------------------------------------+
55 | Initialize EBC CONFIG
56 +-------------------------------------------------------------------------*/
57 mtebc(xbcfg
, EBC_CFG_LE_UNLOCK
|
58 EBC_CFG_PTD_ENABLE
| EBC_CFG_RTC_64PERCLK
|
59 EBC_CFG_ATC_PREVIOUS
| EBC_CFG_DTC_PREVIOUS
|
60 EBC_CFG_CTC_PREVIOUS
| EBC_CFG_EMC_NONDEFAULT
|
61 EBC_CFG_PME_DISABLE
| EBC_CFG_PR_32
);
63 /*-------------------------------------------------------------------------+
64 | FPGA. Initialize bank 7 with default values.
65 +-------------------------------------------------------------------------*/
66 mtebc(pb7ap
, EBC_BXAP_BME_DISABLED
|EBC_BXAP_TWT_ENCODE(7)|
68 EBC_BXAP_CSN_ENCODE(1)|EBC_BXAP_OEN_ENCODE(1)|
69 EBC_BXAP_WBN_ENCODE(1)|EBC_BXAP_WBF_ENCODE(1)|
70 EBC_BXAP_TH_ENCODE(1)|EBC_BXAP_RE_DISABLED
|
71 EBC_BXAP_BEM_WRITEONLY
|
72 EBC_BXAP_PEN_DISABLED
);
73 mtebc(pb7cr
, EBC_BXCR_BAS_ENCODE(0x48300000)|
74 EBC_BXCR_BS_1MB
|EBC_BXCR_BU_RW
|EBC_BXCR_BW_8BIT
);
76 /* read FPGA base register FPGA_REG0 */
77 switch_status
= *fpga_base
;
79 if (switch_status
& 0x40) {
80 cs0_base
= 0xFFE00000;
81 cs0_size
= EBC_BXCR_BS_2MB
;
83 cs2_base
= 0xFF800000;
84 cs2_size
= EBC_BXCR_BS_4MB
;
87 cs0_base
= 0xFFC00000;
88 cs0_size
= EBC_BXCR_BS_4MB
;
90 cs2_base
= 0xFF800000;
91 cs2_size
= EBC_BXCR_BS_2MB
;
95 /*-------------------------------------------------------------------------+
96 | 1 MB FLASH / 1 MB SRAM. Initialize bank 0 with default values.
97 +-------------------------------------------------------------------------*/
98 mtebc(pb0ap
, EBC_BXAP_BME_DISABLED
|EBC_BXAP_TWT_ENCODE(cs0_twt
)|
100 EBC_BXAP_CSN_ENCODE(1)|EBC_BXAP_OEN_ENCODE(1)|
101 EBC_BXAP_WBN_ENCODE(1)|EBC_BXAP_WBF_ENCODE(1)|
102 EBC_BXAP_TH_ENCODE(1)|EBC_BXAP_RE_DISABLED
|
103 EBC_BXAP_BEM_WRITEONLY
|
104 EBC_BXAP_PEN_DISABLED
);
105 mtebc(pb0cr
, EBC_BXCR_BAS_ENCODE(cs0_base
)|
106 cs0_size
|EBC_BXCR_BU_RW
|EBC_BXCR_BW_8BIT
);
108 /*-------------------------------------------------------------------------+
109 | 8KB NVRAM/RTC. Initialize bank 1 with default values.
110 +-------------------------------------------------------------------------*/
111 mtebc(pb1ap
, EBC_BXAP_BME_DISABLED
|EBC_BXAP_TWT_ENCODE(10)|
112 EBC_BXAP_BCE_DISABLE
|
113 EBC_BXAP_CSN_ENCODE(1)|EBC_BXAP_OEN_ENCODE(1)|
114 EBC_BXAP_WBN_ENCODE(1)|EBC_BXAP_WBF_ENCODE(1)|
115 EBC_BXAP_TH_ENCODE(1)|EBC_BXAP_RE_DISABLED
|
116 EBC_BXAP_BEM_WRITEONLY
|
117 EBC_BXAP_PEN_DISABLED
);
118 mtebc(pb1cr
, EBC_BXCR_BAS_ENCODE(0x48000000)|
119 EBC_BXCR_BS_1MB
|EBC_BXCR_BU_RW
|EBC_BXCR_BW_8BIT
);
121 /*-------------------------------------------------------------------------+
122 | 4 MB FLASH. Initialize bank 2 with default values.
123 +-------------------------------------------------------------------------*/
124 mtebc(pb2ap
, EBC_BXAP_BME_DISABLED
|EBC_BXAP_TWT_ENCODE(cs2_twt
)|
125 EBC_BXAP_BCE_DISABLE
|
126 EBC_BXAP_CSN_ENCODE(1)|EBC_BXAP_OEN_ENCODE(1)|
127 EBC_BXAP_WBN_ENCODE(1)|EBC_BXAP_WBF_ENCODE(1)|
128 EBC_BXAP_TH_ENCODE(1)|EBC_BXAP_RE_DISABLED
|
129 EBC_BXAP_BEM_WRITEONLY
|
130 EBC_BXAP_PEN_DISABLED
);
131 mtebc(pb2cr
, EBC_BXCR_BAS_ENCODE(cs2_base
)|
132 cs2_size
|EBC_BXCR_BU_RW
|EBC_BXCR_BW_8BIT
);
134 /*-------------------------------------------------------------------------+
135 | FPGA. Initialize bank 7 with default values.
136 +-------------------------------------------------------------------------*/
137 mtebc(pb7ap
, EBC_BXAP_BME_DISABLED
|EBC_BXAP_TWT_ENCODE(7)|
138 EBC_BXAP_BCE_DISABLE
|
139 EBC_BXAP_CSN_ENCODE(1)|EBC_BXAP_OEN_ENCODE(1)|
140 EBC_BXAP_WBN_ENCODE(1)|EBC_BXAP_WBF_ENCODE(1)|
141 EBC_BXAP_TH_ENCODE(1)|EBC_BXAP_RE_DISABLED
|
142 EBC_BXAP_BEM_WRITEONLY
|
143 EBC_BXAP_PEN_DISABLED
);
144 mtebc(pb7cr
, EBC_BXCR_BAS_ENCODE(0x48300000)|
145 EBC_BXCR_BS_1MB
|EBC_BXCR_BU_RW
|EBC_BXCR_BW_8BIT
);
147 /*--------------------------------------------------------------------
148 * Setup the interrupt controller polarities, triggers, etc.
149 *-------------------------------------------------------------------*/
150 mtdcr (uic0sr
, 0xffffffff); /* clear all */
151 mtdcr (uic0er
, 0x00000000); /* disable all */
152 mtdcr (uic0cr
, 0x00000009); /* SMI & UIC1 crit are critical */
153 mtdcr (uic0pr
, 0xfffffe13); /* per ref-board manual */
154 mtdcr (uic0tr
, 0x01c00008); /* per ref-board manual */
155 mtdcr (uic0vr
, 0x00000001); /* int31 highest, base=0x000 */
156 mtdcr (uic0sr
, 0xffffffff); /* clear all */
158 mtdcr (uic1sr
, 0xffffffff); /* clear all */
159 mtdcr (uic1er
, 0x00000000); /* disable all */
160 mtdcr (uic1cr
, 0x00000000); /* all non-critical */
161 mtdcr (uic1pr
, 0xffffe0ff); /* per ref-board manual */
162 mtdcr (uic1tr
, 0x00ffc000); /* per ref-board manual */
163 mtdcr (uic1vr
, 0x00000001); /* int31 highest, base=0x000 */
164 mtdcr (uic1sr
, 0xffffffff); /* clear all */
166 mtdcr (uic2sr
, 0xffffffff); /* clear all */
167 mtdcr (uic2er
, 0x00000000); /* disable all */
168 mtdcr (uic2cr
, 0x00000000); /* all non-critical */
169 mtdcr (uic2pr
, 0xffffffff); /* per ref-board manual */
170 mtdcr (uic2tr
, 0x00ff8c0f); /* per ref-board manual */
171 mtdcr (uic2vr
, 0x00000001); /* int31 highest, base=0x000 */
172 mtdcr (uic2sr
, 0xffffffff); /* clear all */
174 mtdcr (uicb0sr
, 0xfc000000); /* clear all */
175 mtdcr (uicb0er
, 0x00000000); /* disable all */
176 mtdcr (uicb0cr
, 0x00000000); /* all non-critical */
177 mtdcr (uicb0pr
, 0xfc000000); /* */
178 mtdcr (uicb0tr
, 0x00000000); /* */
179 mtdcr (uicb0vr
, 0x00000001); /* */
180 mfsdr (sdr_mfr
, mfr
);
181 mfr
&= ~SDR0_MFR_ECS_MASK
;
182 /* mtsdr(sdr_mfr, mfr); */
189 int checkboard (void)
191 char *s
= getenv ("serial#");
193 printf ("Board: Ocotea - AMCC PPC440GX Evaluation Board");
204 long int initdram (int board_type
)
208 #if defined(CONFIG_SPD_EEPROM)
209 dram_size
= spd_sdram ();
211 dram_size
= fixed_sdram ();
217 #if !defined(CONFIG_SPD_EEPROM)
218 /*************************************************************************
219 * fixed sdram init -- doesn't use serial presence detect.
221 * Assumes: 128 MB, non-ECC, non-registered
224 ************************************************************************/
225 long int fixed_sdram (void)
229 /*--------------------------------------------------------------------
231 *------------------------------------------------------------------*/
232 mtsdram (mem_uabba
, 0x00000000); /* ubba=0 (default) */
233 mtsdram (mem_slio
, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
234 mtsdram (mem_devopt
, 0x00000000); /* dll=0 ds=0 (normal) */
235 mtsdram (mem_wddctr
, 0x00000000); /* wrcp=0 dcd=0 */
236 mtsdram (mem_clktr
, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
238 /*--------------------------------------------------------------------
239 * Setup for board-specific specific mem
240 *------------------------------------------------------------------*/
242 * Following for CAS Latency = 2.5 @ 133 MHz PLB
244 mtsdram (mem_b0cr
, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
245 mtsdram (mem_tr0
, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */
247 mtsdram (mem_tr1
, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */
248 mtsdram (mem_rtr
, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */
249 mtsdram (mem_cfg1
, 0x00000000); /* Self-refresh exit, disable PM */
250 udelay (400); /* Delay 200 usecs (min) */
252 /*--------------------------------------------------------------------
253 * Enable the controller, then wait for DCEN to complete
254 *------------------------------------------------------------------*/
255 mtsdram (mem_cfg0
, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */
257 mfsdram (mem_mcsts
, reg
);
258 if (reg
& 0x80000000)
262 return (128 * 1024 * 1024); /* 128 MB */
264 #endif /* !defined(CONFIG_SPD_EEPROM) */
267 /*************************************************************************
270 * This routine is called just prior to registering the hose and gives
271 * the board the opportunity to check things. Returning a value of zero
272 * indicates that things are bad & PCI initialization should be aborted.
274 * Different boards may wish to customize the pci controller structure
275 * (add regions, override default access routines, etc) or perform
276 * certain pre-initialization actions.
278 ************************************************************************/
279 #if defined(CONFIG_PCI)
280 int pci_pre_init(struct pci_controller
* hose
)
284 /*--------------------------------------------------------------------------+
285 * The ocotea board is always configured as the host & requires the
286 * PCI arbiter to be enabled.
287 *--------------------------------------------------------------------------*/
288 mfsdr(sdr_sdstp1
, strap
);
289 if( (strap
& SDR0_SDSTP1_PAE_MASK
) == 0 ){
290 printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap
);
296 #endif /* defined(CONFIG_PCI) */
298 /*************************************************************************
301 * The bootstrap configuration provides default settings for the pci
302 * inbound map (PIM). But the bootstrap config choices are limited and
303 * may not be sufficient for a given board.
305 ************************************************************************/
306 #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
307 void pci_target_init(struct pci_controller
* hose
)
309 /*--------------------------------------------------------------------------+
311 *--------------------------------------------------------------------------*/
312 out32r( PCIX0_PIM0SA
, 0 ); /* disable */
313 out32r( PCIX0_PIM1SA
, 0 ); /* disable */
314 out32r( PCIX0_PIM2SA
, 0 ); /* disable */
315 out32r( PCIX0_EROMBA
, 0 ); /* disable expansion rom */
317 /*--------------------------------------------------------------------------+
318 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
319 * options to not support sizes such as 128/256 MB.
320 *--------------------------------------------------------------------------*/
321 out32r( PCIX0_PIM0LAL
, CFG_SDRAM_BASE
);
322 out32r( PCIX0_PIM0LAH
, 0 );
323 out32r( PCIX0_PIM0SA
, ~(gd
->ram_size
- 1) | 1 );
325 out32r( PCIX0_BAR0
, 0 );
327 /*--------------------------------------------------------------------------+
328 * Program the board's subsystem id/vendor id
329 *--------------------------------------------------------------------------*/
330 out16r( PCIX0_SBSYSVID
, CFG_PCI_SUBSYS_VENDORID
);
331 out16r( PCIX0_SBSYSID
, CFG_PCI_SUBSYS_DEVICEID
);
333 out16r( PCIX0_CMD
, in16r(PCIX0_CMD
) | PCI_COMMAND_MEMORY
);
335 #endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
338 /*************************************************************************
341 * This routine is called to determine if a pci scan should be
342 * performed. With various hardware environments (especially cPCI and
343 * PPMC) it's insufficient to depend on the state of the arbiter enable
344 * bit in the strap register, or generic host/adapter assumptions.
346 * Rather than hard-code a bad assumption in the general 440 code, the
347 * 440 pci code requires the board to decide at runtime.
349 * Return 0 for adapter mode, non-zero for host (monarch) mode.
352 ************************************************************************/
353 #if defined(CONFIG_PCI)
354 int is_pci_host(struct pci_controller
*hose
)
356 /* The ocotea board is always configured as host. */
359 #endif /* defined(CONFIG_PCI) */
365 unsigned long sdr0_pfc0
;
366 unsigned long sdr0_pfc1
;
367 unsigned long sdr0_cust0
;
370 mfsdr (sdr_pfc0
, sdr0_pfc0
);
371 mfsdr (sdr_pfc1
, sdr0_pfc1
);
372 group
= SDR0_PFC1_EPS_DECODE(sdr0_pfc1
);
375 sdr0_pfc0
= (sdr0_pfc0
& ~SDR0_PFC0_GEIE_MASK
) | SDR0_PFC0_GEIE_TRE
;
376 if ( ((pvr
== PVR_440GX_RA
) || (pvr
== PVR_440GX_RB
)) && ((group
== 4) || (group
== 5))) {
377 sdr0_pfc0
= (sdr0_pfc0
& ~SDR0_PFC0_TRE_MASK
) | SDR0_PFC0_TRE_DISABLE
;
378 sdr0_pfc1
= (sdr0_pfc1
& ~SDR0_PFC1_CTEMS_MASK
) | SDR0_PFC1_CTEMS_EMS
;
379 out8(FPGA_REG2
, (in8(FPGA_REG2
) & ~FPGA_REG2_EXT_INTFACE_MASK
) |
380 FPGA_REG2_EXT_INTFACE_ENABLE
);
381 mtsdr (sdr_pfc0
, sdr0_pfc0
);
382 mtsdr (sdr_pfc1
, sdr0_pfc1
);
384 sdr0_pfc0
= (sdr0_pfc0
& ~SDR0_PFC0_TRE_MASK
) | SDR0_PFC0_TRE_ENABLE
;
391 out8(FPGA_REG2
, (in8(FPGA_REG2
) & ~FPGA_REG2_EXT_INTFACE_MASK
) |
392 FPGA_REG2_EXT_INTFACE_ENABLE
);
393 sdr0_pfc1
= (sdr0_pfc1
& ~SDR0_PFC1_CTEMS_MASK
) | SDR0_PFC1_CTEMS_EMS
;
394 mtsdr (sdr_pfc0
, sdr0_pfc0
);
395 mtsdr (sdr_pfc1
, sdr0_pfc1
);
401 /* CPU trace B - Over EBMI */
402 sdr0_pfc1
= (sdr0_pfc1
& ~SDR0_PFC1_CTEMS_MASK
) | SDR0_PFC1_CTEMS_CPUTRACE
;
403 mtsdr (sdr_pfc0
, sdr0_pfc0
);
404 mtsdr (sdr_pfc1
, sdr0_pfc1
);
405 out8(FPGA_REG2
, (in8(FPGA_REG2
) & ~FPGA_REG2_EXT_INTFACE_MASK
) |
406 FPGA_REG2_EXT_INTFACE_DISABLE
);
411 /* Initialize the ethernet specific functions in the fpga */
412 mfsdr(sdr_pfc1
, sdr0_pfc1
);
413 mfsdr(sdr_cust0
, sdr0_cust0
);
414 if ( (SDR0_PFC1_EPS_DECODE(sdr0_pfc1
) == 4) &&
415 ((SDR0_CUST0_RGMII2_DECODE(sdr0_cust0
) == RGMII_FER_GMII
) ||
416 (SDR0_CUST0_RGMII2_DECODE(sdr0_cust0
) == RGMII_FER_TBI
)))
418 if ((in8(FPGA_REG0
) & FPGA_REG0_ECLS_MASK
) == FPGA_REG0_ECLS_VER1
)
420 out8(FPGA_REG3
, (in8(FPGA_REG3
) & ~FPGA_REG3_ENET_MASK1
) |
421 FPGA_REG3_ENET_GROUP7
);
425 if (SDR0_CUST0_RGMII2_DECODE(sdr0_cust0
) == RGMII_FER_GMII
)
427 out8(FPGA_REG3
, (in8(FPGA_REG3
) & ~FPGA_REG3_ENET_MASK2
) |
428 FPGA_REG3_ENET_GROUP7
);
432 out8(FPGA_REG3
, (in8(FPGA_REG3
) & ~FPGA_REG3_ENET_MASK2
) |
433 FPGA_REG3_ENET_GROUP8
);
439 if ((in8(FPGA_REG0
) & FPGA_REG0_ECLS_MASK
) == FPGA_REG0_ECLS_VER1
)
441 out8(FPGA_REG3
, (in8(FPGA_REG3
) & ~FPGA_REG3_ENET_MASK1
) |
442 FPGA_REG3_ENET_ENCODE1(SDR0_PFC1_EPS_DECODE(sdr0_pfc1
)));
446 out8(FPGA_REG3
, (in8(FPGA_REG3
) & ~FPGA_REG3_ENET_MASK2
) |
447 FPGA_REG3_ENET_ENCODE2(SDR0_PFC1_EPS_DECODE(sdr0_pfc1
)));
450 out8(FPGA_REG4
, FPGA_REG4_GPHY_MODE10
|
451 FPGA_REG4_GPHY_MODE100
| FPGA_REG4_GPHY_MODE1000
|
452 FPGA_REG4_GPHY_FRC_DPLX
| FPGA_REG4_CONNECT_PHYS
);
454 /* reset the gigabyte phy if necessary */
455 if (SDR0_PFC1_EPS_DECODE(sdr0_pfc1
) >= 3)
457 if ((in8(FPGA_REG0
) & FPGA_REG0_ECLS_MASK
) == FPGA_REG0_ECLS_VER1
)
459 out8(FPGA_REG3
, in8(FPGA_REG3
) & ~FPGA_REG3_GIGABIT_RESET_DISABLE
);
461 out8(FPGA_REG3
, in8(FPGA_REG3
) | FPGA_REG3_GIGABIT_RESET_DISABLE
);
465 out8(FPGA_REG2
, in8(FPGA_REG2
) & ~FPGA_REG2_GIGABIT_RESET_DISABLE
);
467 out8(FPGA_REG2
, in8(FPGA_REG2
) | FPGA_REG2_GIGABIT_RESET_DISABLE
);
472 * new Ocotea with Rev. F (pass 3) chips has SMII PHY reset
474 if ((in8(FPGA_REG0
) & FPGA_REG0_ECLS_MASK
) == FPGA_REG0_ECLS_VER2
) {
475 out8(FPGA_REG2
, in8(FPGA_REG2
) & ~FPGA_REG2_SMII_RESET_DISABLE
);
477 out8(FPGA_REG2
, in8(FPGA_REG2
) | FPGA_REG2_SMII_RESET_DISABLE
);
480 /* Turn off the LED's */
481 out8(FPGA_REG3
, (in8(FPGA_REG3
) & ~FPGA_REG3_STAT_MASK
) |
482 FPGA_REG3_STAT_LED8_DISAB
| FPGA_REG3_STAT_LED4_DISAB
|
483 FPGA_REG3_STAT_LED2_DISAB
| FPGA_REG3_STAT_LED1_DISAB
);
490 * Returns 1 if keys pressed to start the power-on long-running tests
491 * Called from board_init_f().
493 int post_hotkeys_pressed(void)