board/bf609-ezkit/soft_switch.h

   1 /*
   2  * U-boot - main board file
   3  *
   4  * Copyright (c) 2008-2011 Analog Devices Inc.
   5  *
   6  * Licensed under the GPL-2 or later.
   7  */
   8
   9 #ifndef __SOFT_SWITCH_H__
  10 #define __SOFT_SWITCH_H__
  11
  12 /* switch 0 port A */
  13 #define CAN_EN                 0x1
  14 #define CAN_STB                0x2
  15 #define CAN0_ERR_EN            0x4
  16 #define CAN0RX_EN              0x8
  17 #define CNT0UD_EN              0x10
  18 #define CNT0DG_EN              0x20
  19 #define CNT0ZM_EN              0x40
  20 #define RMII_CLK_EN            0x80
  21
  22 /* switch 0 port B */
  23 #define UART0RTS_EN            0x1
  24 #define UART0RX_EN             0x2
  25 #define UART0CTS_EN            0x4
  26 #define UART0CTS_RTS_LPBK      0x8
  27 #define UART0CTS_RST_EN        0x10
  28 #define UART0CTS_146_EN        0x20
  29 #define TEMP_IRQ_EN            0x40
  30 #define TEMP_THERM_EN          0x80
  31
  32 /* switch 1 port A */
  33 #define OVERRIDE_SMC0_LP0_BOOT 0x1
  34 #define SMC0_EPPI2_LP1_SWITCH  0x2
  35 #define SMC0_LP0_EN            0x8
  36 #define LED1_GPIO_EN           0x10
  37 #define LED2_GPIO_EN           0x20
  38 #define LED3_GPIO_EN           0x40
  39 #define LED4_GPIO_EN           0x80
  40
  41 /* switch 1 port B */
  42 #define PUSHBUTTON1_EN         0x1
  43 #define PUSHBUTTON2_EN         0x2
  44 #define SD_CD_EN               0x4
  45 #define SD_WP_EN               0x8
  46 #define SPIFLASH_CS_EN         0x10
  47 #define SPI0D2_EN              0x20
  48 #define SPI0D3_EN              0x40
  49
  50 /* switch 2 port A */
  51 #define PHYINT_EN              0x1
  52 #define PHY_PWR_DWN_INT        0x2
  53 #define PHYAD0                 0x4
  54 #define ETHERNET_EN            0x8
  55 #define WAKE_PUSHBUTTON_EN     0x10
  56 #define PD0_SPI0D2_EN          0x20
  57 #define PD1_SPI0D3_EN          0x40
  58 #define PD2_SPI0MISO_EN        0x80
  59
  60 /* switch 2 port B */
  61 #define PD3_SPI0MOSI_EN        0x1
  62 #define PD4_SPI0CK_EN          0x2
  63
  64 #define IO_PORT_A              0
  65 #define IO_PORT_B              1
  66 #define IO_PORT_INPUT          0
  67 #define IO_PORT_OUTPUT         1
  68
  69 int config_switch_bit(int num, int port, int bit, int dir, uchar value);
  70 int setup_board_switches(void);
  71 #endif