]>
git.ipfire.org Git - people/ms/u-boot.git/blob - board/cm5200/cm5200.c
2 * (C) Copyright 2003-2007
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
6 * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
8 * (C) Copyright 2004-2005
9 * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
11 * Adapted to U-Boot 1.2 by:
12 * Bartlomiej Sieka <tur@semihalf.com>:
13 * - HW ID readout from EEPROM
15 * Grzegorz Bernacki <gjb@semihalf.com>:
16 * - run-time SDRAM controller configuration
19 * SPDX-License-Identifier: GPL-2.0+
25 #include <asm/processor.h>
27 #include <linux/ctype.h>
29 #ifdef CONFIG_OF_LIBFDT
31 #include <fdt_support.h>
32 #endif /* CONFIG_OF_LIBFDT */
38 DECLARE_GLOBAL_DATA_PTR
;
43 #ifndef CONFIG_SYS_RAMBOOT
45 * Helper function to initialize SDRAM controller.
47 static void sdram_start(int hi_addr
, mem_conf_t
*mem_conf
)
49 long hi_addr_bit
= hi_addr
? 0x01000000 : 0;
51 /* unlock mode register */
52 *(vu_long
*)MPC5XXX_SDRAM_CTRL
= mem_conf
->control
| 0x80000000 |
55 /* precharge all banks */
56 *(vu_long
*)MPC5XXX_SDRAM_CTRL
= mem_conf
->control
| 0x80000002 |
60 *(vu_long
*)MPC5XXX_SDRAM_CTRL
= mem_conf
->control
| 0x80000004 |
63 /* auto refresh, second time */
64 *(vu_long
*)MPC5XXX_SDRAM_CTRL
= mem_conf
->control
| 0x80000004 |
67 /* set mode register */
68 *(vu_long
*)MPC5XXX_SDRAM_MODE
= mem_conf
->mode
;
70 /* normal operation */
71 *(vu_long
*)MPC5XXX_SDRAM_CTRL
= mem_conf
->control
| hi_addr_bit
;
73 #endif /* CONFIG_SYS_RAMBOOT */
77 * Retrieve memory configuration for a given module. board_type is the index
78 * in hw_id_list[] corresponding to the module we are executing on; we return
79 * SDRAM controller settings approprate for this module.
81 static mem_conf_t
* get_mem_config(int board_type
)
85 return memory_config
[0];
88 return memory_config
[1];
90 printf("ERROR: Unknown module, using a default SDRAM "
91 "configuration - things may not work!!!.\n");
92 return memory_config
[0];
98 * Initalize SDRAM - configure SDRAM controller, detect memory size.
100 phys_size_t
initdram(int board_type
)
103 #ifndef CONFIG_SYS_RAMBOOT
105 mem_conf_t
*mem_conf
;
107 mem_conf
= get_mem_config(board_type
);
109 /* configure SDRAM start/end for detection */
110 *(vu_long
*)MPC5XXX_SDRAM_CS0CFG
= 0x0000001e; /* 2G at 0x0 */
112 /* setup config registers */
113 *(vu_long
*)MPC5XXX_SDRAM_CONFIG1
= mem_conf
->config1
;
114 *(vu_long
*)MPC5XXX_SDRAM_CONFIG2
= mem_conf
->config2
;
116 sdram_start(0, mem_conf
);
117 test1
= get_ram_size((long *)CONFIG_SYS_SDRAM_BASE
, 0x80000000);
118 sdram_start(1, mem_conf
);
119 test2
= get_ram_size((long *)CONFIG_SYS_SDRAM_BASE
, 0x80000000);
121 sdram_start(0, mem_conf
);
126 /* memory smaller than 1MB is impossible */
127 if (dramsize
< (1 << 20))
130 /* set SDRAM CS0 size according to the amount of RAM found */
132 *(vu_long
*)MPC5XXX_SDRAM_CS0CFG
= 0x13 +
133 __builtin_ffs(dramsize
>> 20) - 1;
135 *(vu_long
*)MPC5XXX_SDRAM_CS0CFG
= 0; /* disabled */
136 #else /* CONFIG_SYS_RAMBOOT */
137 /* retrieve size of memory connected to SDRAM CS0 */
138 dramsize
= *(vu_long
*)MPC5XXX_SDRAM_CS0CFG
& 0xFF;
139 if (dramsize
>= 0x13)
140 dramsize
= (1 << (dramsize
- 0x13)) << 20;
143 #endif /* !CONFIG_SYS_RAMBOOT */
146 * On MPC5200B we need to set the special configuration delay in the
147 * DDR controller. Refer to chapter 8.7.5 SDelay--MBAR + 0x0190 of
148 * the MPC5200B User's Manual.
150 *(vu_long
*)MPC5XXX_SDRAM_SDELAY
= 0x04;
151 __asm__
volatile ("sync");
158 * Read module hardware identification data from the I2C EEPROM.
160 static void read_hw_id(hw_id_t hw_id
)
163 for (i
= 0; i
< HW_ID_ELEM_COUNT
; ++i
)
164 if (i2c_read(CONFIG_SYS_I2C_EEPROM
,
165 hw_id_format
[i
].offset
,
167 (uchar
*)&hw_id
[i
][0],
168 hw_id_format
[i
].length
) != 0)
169 printf("ERROR: can't read HW ID from EEPROM\n");
174 * Identify module we are running on, set gd->board_type to the index in
175 * hw_id_list[] corresponding to the module identifed, or to
176 * CM5200_UNKNOWN_MODULE if we can't identify the module.
178 static void identify_module(hw_id_t hw_id
)
182 gd
->board_type
= CM5200_UNKNOWN_MODULE
;
183 for (i
= 0; i
< sizeof (hw_id_list
) / sizeof (char **); ++i
) {
185 for (j
= 0; j
< sizeof (hw_id_identify
) / sizeof (int); ++j
) {
186 element
= hw_id_identify
[j
];
187 if (strncmp(hw_id_list
[i
][element
],
189 hw_id_format
[element
].length
) != 0) {
203 * Compose string with module name.
204 * buf is assumed to have enough space, and be null-terminated.
206 static void compose_module_name(hw_id_t hw_id
, char *buf
)
208 char tmp
[MODULE_NAME_MAXLEN
];
209 strncat(buf
, &hw_id
[PCB_NAME
][0], hw_id_format
[PCB_NAME
].length
);
210 strncat(buf
, ".", 1);
211 strncat(buf
, &hw_id
[FORM
][0], hw_id_format
[FORM
].length
);
212 strncat(buf
, &hw_id
[VERSION
][0], hw_id_format
[VERSION
].length
);
213 strncat(buf
, " (", 2);
214 strncat(buf
, &hw_id
[IDENTIFICATION_NUMBER
][0],
215 hw_id_format
[IDENTIFICATION_NUMBER
].length
);
216 sprintf(tmp
, " / %u.%u)",
217 hw_id
[MAJOR_SW_VERSION
][0],
218 hw_id
[MINOR_SW_VERSION
][0]);
224 * Compose string with hostname.
225 * buf is assumed to have enough space, and be null-terminated.
227 static void compose_hostname(hw_id_t hw_id
, char *buf
)
230 strncat(buf
, &hw_id
[PCB_NAME
][0], hw_id_format
[PCB_NAME
].length
);
231 strncat(buf
, "_", 1);
232 strncat(buf
, &hw_id
[FORM
][0], hw_id_format
[FORM
].length
);
233 strncat(buf
, &hw_id
[VERSION
][0], hw_id_format
[VERSION
].length
);
234 for (p
= buf
; *p
; ++p
)
240 #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
242 * Update 'model' and 'memory' properties in the blob according to the module
243 * that we are running on.
245 static void ft_blob_update(void *blob
, bd_t
*bd
)
247 int len
, ret
, nodeoffset
= 0;
248 char module_name
[MODULE_NAME_MAXLEN
] = {0};
250 compose_module_name(hw_id
, module_name
);
251 len
= strlen(module_name
) + 1;
253 ret
= fdt_setprop(blob
, nodeoffset
, "model", module_name
, len
);
255 printf("ft_blob_update(): cannot set /model property err:%s\n",
258 #endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
262 * Read HW ID from I2C EEPROM and detect the modue we are running on. Note
263 * that we need to use local variable for readout, because global data is not
264 * writable yet (and we'll have to redo the readout later on).
269 char module_name_tmp
[MODULE_NAME_MAXLEN
] = "";
272 * We need I2C to access HW ID data from EEPROM, so we call i2c_init()
273 * here despite the fact that it will be called again later on. We
274 * also use a little trick to silence I2C-related output.
276 gd
->flags
|= GD_FLG_SILENT
;
277 i2c_init (CONFIG_SYS_I2C_SPEED
, CONFIG_SYS_I2C_SLAVE
);
278 gd
->flags
&= ~GD_FLG_SILENT
;
280 read_hw_id(hw_id_tmp
);
281 identify_module(hw_id_tmp
); /* this sets gd->board_type */
282 compose_module_name(hw_id_tmp
, module_name_tmp
);
284 if (gd
->board_type
!= CM5200_UNKNOWN_MODULE
)
285 printf("Board: %s\n", module_name_tmp
);
287 printf("Board: unrecognized cm5200 module (%s)\n",
294 int board_early_init_r(void)
297 * Now, when we are in RAM, enable flash write access for detection
298 * process. Note that CS_BOOT cannot be cleared when executing in
301 *(vu_long
*)MPC5XXX_BOOTCS_CFG
&= ~0x1; /* clear RO */
303 /* Now that we can write to global data, read HW ID again. */
309 #ifdef CONFIG_MISC_INIT_R
310 int misc_init_r(void)
312 #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C_SOFT)
315 char hostname
[MODULE_NAME_MAXLEN
];
317 /* Read ethaddr from EEPROM */
318 if (i2c_read(CONFIG_SYS_I2C_EEPROM
, CONFIG_MAC_OFFSET
, 2, buf
, 6) == 0) {
319 sprintf(str
, "%02X:%02X:%02X:%02X:%02X:%02X",
320 buf
[0], buf
[1], buf
[2], buf
[3], buf
[4], buf
[5]);
321 /* Check if MAC addr is owned by Schindler */
322 if (strstr(str
, "00:06:C3") != str
)
323 printf(LOG_PREFIX
"Warning - Illegal MAC address (%s)"
324 " in EEPROM.\n", str
);
326 printf(LOG_PREFIX
"Using MAC (%s) from I2C EEPROM\n",
328 setenv("ethaddr", str
);
331 printf(LOG_PREFIX
"Warning - Unable to read MAC from I2C"
332 " device at address %02X:%04X\n", CONFIG_SYS_I2C_EEPROM
,
335 #endif /* defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C_SOFT) */
336 if (!getenv("ethaddr"))
337 printf(LOG_PREFIX
"MAC address not set, networking is not "
340 /* set the hostname appropriate to the module we're running on */
342 compose_hostname(hw_id
, hostname
);
343 setenv("hostname", hostname
);
347 #endif /* CONFIG_MISC_INIT_R */
350 #ifdef CONFIG_LAST_STAGE_INIT
351 int last_stage_init(void)
353 #ifdef CONFIG_USB_STORAGE
355 #endif /* CONFIG_USB_STORAGE */
358 #endif /* CONFIG_LAST_STAGE_INIT */
361 #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
362 int ft_board_setup(void *blob
, bd_t
*bd
)
364 ft_cpu_setup(blob
, bd
);
365 ft_blob_update(blob
, bd
);
369 #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */