board/esd/pf5200/pf5200.c

   1 /*
   2  * (C) Copyright 2003
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * (C) Copyright 2004
   6  * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
   7  *
   8  * See file CREDITS for list of people who contributed to this
   9  * project.
  10  *
  11  * This program is free software; you can redistribute it and/or
  12  * modify it under the terms of the GNU General Public License as
  13  * published by the Free Software Foundation; either version 2 of
  14  * the License, or (at your option) any later version.
  15  *
  16  * This program is distributed in the hope that it will be useful,
  17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  * GNU General Public License for more details.
  20  *
  21  * You should have received a copy of the GNU General Public License
  22  * along with this program; if not, write to the Free Software
  23  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  24  * MA 02111-1307 USA
  25  */
  26
  27 /*
  28  * pf5200.c - main board support/init for the esd pf5200.
  29  */
  30
  31 #include <common.h>
  32 #include <mpc5xxx.h>
  33 #include <pci.h>
  34 #include <command.h>
  35
  36 #include "mt46v16m16-75.h"
  37
  38 void init_power_switch(void);
  39
  40 static void sdram_start(int hi_addr)
  41 {
  42         long hi_addr_bit = hi_addr ? 0x01000000 : 0;
  43
  44         /* unlock mode register */
  45         *(vu_long *) MPC5XXX_SDRAM_CTRL =
  46             SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
  47         __asm__ volatile ("sync");
  48
  49         /* precharge all banks */
  50         *(vu_long *) MPC5XXX_SDRAM_CTRL =
  51             SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
  52         __asm__ volatile ("sync");
  53
  54         /* set mode register: extended mode */
  55         *(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
  56         __asm__ volatile ("sync");
  57
  58         /* set mode register: reset DLL */
  59         *(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
  60         __asm__ volatile ("sync");
  61
  62         /* precharge all banks */
  63         *(vu_long *) MPC5XXX_SDRAM_CTRL =
  64             SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
  65         __asm__ volatile ("sync");
  66
  67         /* auto refresh */
  68         *(vu_long *) MPC5XXX_SDRAM_CTRL =
  69             SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
  70         __asm__ volatile ("sync");
  71
  72         /* set mode register */
  73         *(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_MODE;
  74         __asm__ volatile ("sync");
  75
  76         /* normal operation */
  77         *(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
  78         __asm__ volatile ("sync");
  79 }
  80
  81 /*
  82  * ATTENTION: Although partially referenced initdram does NOT make real use
  83  *            use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
  84  *            is something else than 0x00000000.
  85  */
  86
  87 long int initdram(int board_type)
  88 {
  89         ulong dramsize = 0;
  90         ulong test1, test2;
  91
  92         /* setup SDRAM chip selects */
  93         *(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */
  94         *(vu_long *) MPC5XXX_SDRAM_CS1CFG = 0x80000000; /* disabled */
  95         __asm__ volatile ("sync");
  96
  97         /* setup config registers */
  98         *(vu_long *) MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
  99         *(vu_long *) MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
 100         __asm__ volatile ("sync");
 101
 102         /* set tap delay */
 103         *(vu_long *) MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
 104         __asm__ volatile ("sync");
 105
 106         /* find RAM size using SDRAM CS0 only */
 107         sdram_start(0);
 108         test1 = get_ram_size((long *) CFG_SDRAM_BASE, 0x80000000);
 109         sdram_start(1);
 110         test2 = get_ram_size((long *) CFG_SDRAM_BASE, 0x80000000);
 111
 112         if (test1 > test2) {
 113                 sdram_start(0);
 114                 dramsize = test1;
 115         } else {
 116                 dramsize = test2;
 117         }
 118
 119         /* memory smaller than 1MB is impossible */
 120         if (dramsize < (1 << 20)) {
 121                 dramsize = 0;
 122         }
 123
 124         /* set SDRAM CS0 size according to the amount of RAM found */
 125         if (dramsize > 0) {
 126                 *(vu_long *) MPC5XXX_SDRAM_CS0CFG =
 127                     0x13 + __builtin_ffs(dramsize >> 20) - 1;
 128                 /* let SDRAM CS1 start right after CS0 */
 129                 *(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;      /* 2G */
 130         } else {
 131 #if 0
 132                 *(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0;  /* disabled */
 133                 /* let SDRAM CS1 start right after CS0 */
 134                 *(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;      /* 2G */
 135 #else
 136                 *(vu_long *) MPC5XXX_SDRAM_CS0CFG =
 137                     0x13 + __builtin_ffs(0x08000000 >> 20) - 1;
 138                 /* let SDRAM CS1 start right after CS0 */
 139                 *(vu_long *) MPC5XXX_SDRAM_CS1CFG = 0x08000000 + 0x0000001e;    /* 2G */
 140 #endif
 141         }
 142
 143 #if 0
 144         /* find RAM size using SDRAM CS1 only */
 145         sdram_start(0);
 146         get_ram_size((ulong *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
 147         sdram_start(1);
 148         get_ram_size((ulong *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
 149         sdram_start(0);
 150 #endif
 151         /* set SDRAM CS1 size according to the amount of RAM found */
 152
 153         *(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize;   /* disabled */
 154
 155         init_power_switch();
 156         return (dramsize);
 157 }
 158
 159 int checkboard(void)
 160 {
 161         puts("Board: esd ParaFinder (pf5200)\n");
 162         return 0;
 163 }
 164
 165 void flash_preinit(void)
 166 {
 167         /*
 168          * Now, when we are in RAM, enable flash write
 169          * access for detection process.
 170          * Note that CS_BOOT cannot be cleared when
 171          * executing in flash.
 172          */
 173         *(vu_long *) MPC5XXX_BOOTCS_CFG &= ~0x1;        /* clear RO */
 174 }
 175
 176 void flash_afterinit(ulong size)
 177 {
 178         if (size == 0x02000000) {
 179                 /* adjust mapping */
 180                 *(vu_long *) MPC5XXX_BOOTCS_START =
 181                     *(vu_long *) MPC5XXX_CS0_START =
 182                     START_REG(CFG_BOOTCS_START | size);
 183                 *(vu_long *) MPC5XXX_BOOTCS_STOP =
 184                     *(vu_long *) MPC5XXX_CS0_STOP =
 185                     STOP_REG(CFG_BOOTCS_START | size, size);
 186         }
 187 }
 188
 189 #ifdef  CONFIG_PCI
 190 static struct pci_controller hose;
 191
 192 extern void pci_mpc5xxx_init(struct pci_controller *);
 193
 194 void pci_init_board(void
 195     ) {
 196         pci_mpc5xxx_init(&hose);
 197 }
 198 #endif
 199
 200 #if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
 201
 202 void init_ide_reset(void)
 203 {
 204         debug("init_ide_reset\n");
 205
 206         /* Configure PSC1_4 as GPIO output for ATA reset */
 207         *(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
 208         *(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4;
 209 }
 210
 211 void ide_set_reset(int idereset)
 212 {
 213         debug("ide_reset(%d)\n", idereset);
 214
 215         if (idereset) {
 216                 *(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
 217         } else {
 218                 *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
 219         }
 220 }
 221 #endif                          /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
 222
 223 #define MPC5XXX_SIMPLEIO_GPIO_ENABLE       (MPC5XXX_GPIO + 0x0004)
 224 #define MPC5XXX_SIMPLEIO_GPIO_DIR          (MPC5XXX_GPIO + 0x000C)
 225 #define MPC5XXX_SIMPLEIO_GPIO_DATA_OUTPUT  (MPC5XXX_GPIO + 0x0010)
 226 #define MPC5XXX_SIMPLEIO_GPIO_DATA_INPUT   (MPC5XXX_GPIO + 0x0014)
 227
 228 #define MPC5XXX_INTERRUPT_GPIO_ENABLE      (MPC5XXX_GPIO + 0x0020)
 229 #define MPC5XXX_INTERRUPT_GPIO_DIR         (MPC5XXX_GPIO + 0x0028)
 230 #define MPC5XXX_INTERRUPT_GPIO_DATA_OUTPUT (MPC5XXX_GPIO + 0x002C)
 231 #define MPC5XXX_INTERRUPT_GPIO_STATUS      (MPC5XXX_GPIO + 0x003C)
 232
 233 #define GPIO_WU6        0x40000000UL
 234 #define GPIO_USB0       0x00010000UL
 235 #define GPIO_USB9       0x08000000UL
 236 #define GPIO_USB9S      0x00080000UL
 237
 238 void init_power_switch(void)
 239 {
 240         debug("init_power_switch\n");
 241
 242         /* Configure GPIO_WU6 as GPIO output for ATA reset */
 243         *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_WU6;
 244         *(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_WU6;
 245         *(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_WU6;
 246         __asm__ volatile ("sync");
 247
 248         *(vu_long *) MPC5XXX_SIMPLEIO_GPIO_DATA_OUTPUT &= ~GPIO_USB0;
 249         *(vu_long *) MPC5XXX_SIMPLEIO_GPIO_ENABLE |= GPIO_USB0;
 250         *(vu_long *) MPC5XXX_SIMPLEIO_GPIO_DIR |= GPIO_USB0;
 251         __asm__ volatile ("sync");
 252
 253         *(vu_long *) MPC5XXX_INTERRUPT_GPIO_DATA_OUTPUT &= ~GPIO_USB9;
 254         *(vu_long *) MPC5XXX_INTERRUPT_GPIO_ENABLE &= ~GPIO_USB9;
 255         __asm__ volatile ("sync");
 256
 257         if ((*(vu_long *) MPC5XXX_INTERRUPT_GPIO_STATUS & GPIO_USB9S) == 0) {
 258                 *(vu_long *) MPC5XXX_SIMPLEIO_GPIO_DATA_OUTPUT |= GPIO_USB0;
 259                 __asm__ volatile ("sync");
 260         }
 261         *(vu_char *) CFG_CS1_START = 0x02;      /* Red Power LED on */
 262         __asm__ volatile ("sync");
 263
 264         *(vu_char *) (CFG_CS1_START + 1) = 0x02;        /* Disable driver for KB11 */
 265         __asm__ volatile ("sync");
 266 }
 267
 268 void power_set_reset(int power)
 269 {
 270         debug("ide_set_reset(%d)\n", power);
 271
 272         if (power) {
 273                 *(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_WU6;
 274                 *(vu_long *) MPC5XXX_INTERRUPT_GPIO_DATA_OUTPUT &= ~GPIO_USB9;
 275         } else {
 276                 *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_WU6;
 277                 if ((*(vu_long *) MPC5XXX_INTERRUPT_GPIO_STATUS & GPIO_USB9S) ==
 278                     0) {
 279                         *(vu_long *) MPC5XXX_SIMPLEIO_GPIO_DATA_OUTPUT |=
 280                             GPIO_USB0;
 281                 }
 282
 283         }
 284 }
 285
 286 int do_poweroff(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 287 {
 288         power_set_reset(1);
 289         return (0);
 290 }
 291
 292 U_BOOT_CMD(poweroff, 1, 1, do_poweroff, "poweroff- Switch off power\n", NULL);
 293
 294 int phypower(int flag)
 295 {
 296         u32 addr;
 297         vu_long *reg;
 298         int status;
 299         pci_dev_t dev;
 300
 301         dev = PCI_BDF(0, 0x18, 0);
 302         status = pci_read_config_dword(dev, PCI_BASE_ADDRESS_1, &addr);
 303         if (status == 0) {
 304                 reg = (vu_long *) (addr + 0x00000040);
 305                 *reg |= 0x40000000;
 306                 __asm__ volatile ("sync");
 307
 308                 reg = (vu_long *) (addr + 0x001000c);
 309                 *reg |= 0x20000000;
 310                 __asm__ volatile ("sync");
 311
 312                 reg = (vu_long *) (addr + 0x0010004);
 313                 if (flag != 0) {
 314                         *reg &= ~0x20000000;
 315                 } else {
 316                         *reg |= 0x20000000;
 317                 }
 318                 __asm__ volatile ("sync");
 319         }
 320         return (status);
 321 }
 322
 323 int do_phypower(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 324 {
 325         int status;
 326
 327         if (argv[1][0] == '0') {
 328                 status = phypower(0);
 329         } else {
 330                 status = phypower(1);
 331         }
 332         return (0);
 333 }
 334
 335 U_BOOT_CMD(phypower, 2, 2, do_phypower,
 336            "phypower- Switch power of ethernet phy\n", NULL);
 337
 338 int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 339 {
 340         unsigned int addr;
 341         unsigned int size;
 342         int i;
 343         volatile unsigned long *ptr;
 344
 345         addr = simple_strtol(argv[1], NULL, 16);
 346         size = simple_strtol(argv[2], NULL, 16);
 347
 348         printf("\nWriting at addr %08x, size %08x.\n", addr, size);
 349
 350         while (1) {
 351                 ptr = (volatile unsigned long *)addr;
 352                 for (i = 0; i < (size >> 2); i++) {
 353                         *ptr++ = i;
 354                 }
 355
 356                 /* Abort if ctrl-c was pressed */
 357                 if (ctrlc()) {
 358                         puts("\nAbort\n");
 359                         return 0;
 360                 }
 361                 putc('.');
 362         }
 363         return 0;
 364 }
 365
 366 U_BOOT_CMD(writepci, 3, 1, do_writepci,
 367            "writepci- Write some data to pcibus\n",
 368            "<addr> <size>\n" "        - Write some data to pcibus.\n");