board/freescale/mpc8569mds/ddr.c

   1 /*
   2  * Copyright 2009 Freescale Semiconductor, Inc.
   3  *
   4  * This program is free software; you can redistribute it and/or
   5  * modify it under the terms of the GNU General Public License
   6  * Version 2 as published by the Free Software Foundation.
   7  */
   8
   9 #include <common.h>
  10 #include <i2c.h>
  11
  12 #include <asm/fsl_ddr_sdram.h>
  13 #include <asm/fsl_ddr_dimm_params.h>
  14
  15 static void
  16 get_spd(ddr3_spd_eeprom_t *spd, unsigned char i2c_address)
  17 {
  18         i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr3_spd_eeprom_t));
  19 }
  20
  21
  22 unsigned int fsl_ddr_get_mem_data_rate(void)
  23 {
  24         return get_ddr_freq(0);
  25 }
  26
  27 void fsl_ddr_get_spd(ddr3_spd_eeprom_t *ctrl_dimms_spd,
  28                       unsigned int ctrl_num)
  29 {
  30         unsigned int i;
  31         unsigned int i2c_address = 0;
  32
  33         for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
  34                 if (ctrl_num == 0 && i == 0)
  35                         i2c_address = SPD_EEPROM_ADDRESS1;
  36                 if (ctrl_num == 0 && i == 1)
  37                         i2c_address = SPD_EEPROM_ADDRESS2;
  38                 get_spd(&(ctrl_dimms_spd[i]), i2c_address);
  39         }
  40 }
  41
  42 void fsl_ddr_board_options(memctl_options_t *popts,
  43                                 dimm_params_t *pdimm,
  44                                 unsigned int ctrl_num)
  45 {
  46         /*
  47          * Factors to consider for clock adjust:
  48          *      - number of chips on bus
  49          *      - position of slot
  50          *      - DDR1 vs. DDR2?
  51          *      - ???
  52          *
  53          * This needs to be determined on a board-by-board basis.
  54          *      0110    3/4 cycle late
  55          *      0111    7/8 cycle late
  56          */
  57         popts->clk_adjust = 6;
  58
  59         /*
  60          * Factors to consider for CPO:
  61          *      - frequency
  62          *      - ddr1 vs. ddr2
  63          */
  64         popts->cpo_override = 0xff;
  65
  66         /*
  67          * Factors to consider for write data delay:
  68          *      - number of DIMMs
  69          *
  70          * 1 = 1/4 clock delay
  71          * 2 = 1/2 clock delay
  72          * 3 = 3/4 clock delay
  73          * 4 = 1   clock delay
  74          * 5 = 5/4 clock delay
  75          * 6 = 3/2 clock delay
  76          */
  77         popts->write_data_delay = 2;
  78
  79         /*
  80          * Factors to consider for half-strength driver enable:
  81          *      - number of DIMMs installed
  82          */
  83         popts->half_strength_driver_enable = 0;
  84 }