board/freescale/mpc8572ds/mpc8572ds.c

   1 /*
   2  * Copyright 2007-2008 Freescale Semiconductor, Inc.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 #include <common.h>
  24 #include <command.h>
  25 #include <pci.h>
  26 #include <asm/processor.h>
  27 #include <asm/mmu.h>
  28 #include <asm/immap_85xx.h>
  29 #include <asm/immap_fsl_pci.h>
  30 #include <asm/fsl_ddr_sdram.h>
  31 #include <asm/io.h>
  32 #include <miiphy.h>
  33 #include <libfdt.h>
  34 #include <fdt_support.h>
  35
  36 #include "../common/pixis.h"
  37
  38 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
  39 extern void ddr_enable_ecc(unsigned int dram_size);
  40 #endif
  41
  42 long int fixed_sdram(void);
  43
  44 int checkboard (void)
  45 {
  46         printf ("Board: MPC8572DS, System ID: 0x%02x, "
  47                 "System Version: 0x%02x, FPGA Version: 0x%02x\n",
  48                 in8(PIXIS_BASE + PIXIS_ID), in8(PIXIS_BASE + PIXIS_VER),
  49                 in8(PIXIS_BASE + PIXIS_PVER));
  50         return 0;
  51 }
  52
  53 phys_size_t initdram(int board_type)
  54 {
  55         phys_size_t dram_size = 0;
  56
  57         puts("Initializing....");
  58
  59 #ifdef CONFIG_SPD_EEPROM
  60         dram_size = fsl_ddr_sdram();
  61
  62         dram_size = setup_ddr_tlbs(dram_size / 0x100000);
  63
  64         dram_size *= 0x100000;
  65 #else
  66         dram_size = fixed_sdram();
  67 #endif
  68
  69 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
  70         /*
  71          * Initialize and enable DDR ECC.
  72          */
  73         ddr_enable_ecc(dram_size);
  74 #endif
  75         puts("    DDR: ");
  76         return dram_size;
  77 }
  78
  79 #if !defined(CONFIG_SPD_EEPROM)
  80 /*
  81  * Fixed sdram init -- doesn't use serial presence detect.
  82  */
  83
  84 phys_size_t fixed_sdram (void)
  85 {
  86         volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
  87         volatile ccsr_ddr_t *ddr= &immap->im_ddr;
  88         uint d_init;
  89
  90         ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
  91         ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
  92
  93         ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
  94         ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
  95         ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
  96         ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
  97         ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1;
  98         ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2;
  99         ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
 100         ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT;
 101         ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL;
 102         ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2;
 103
 104 #if defined (CONFIG_DDR_ECC)
 105         ddr->err_int_en = CONFIG_SYS_DDR_ERR_INT_EN;
 106         ddr->err_disable = CONFIG_SYS_DDR_ERR_DIS;
 107         ddr->err_sbe = CONFIG_SYS_DDR_SBE;
 108 #endif
 109         asm("sync;isync");
 110
 111         udelay(500);
 112
 113         ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
 114
 115 #if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
 116         d_init = 1;
 117         debug("DDR - 1st controller: memory initializing\n");
 118         /*
 119          * Poll until memory is initialized.
 120          * 512 Meg at 400 might hit this 200 times or so.
 121          */
 122         while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0) {
 123                 udelay(1000);
 124         }
 125         debug("DDR: memory initialized\n\n");
 126         asm("sync; isync");
 127         udelay(500);
 128 #endif
 129
 130         return 512 * 1024 * 1024;
 131 }
 132
 133 #endif
 134
 135 #ifdef CONFIG_PCIE1
 136 static struct pci_controller pcie1_hose;
 137 #endif
 138
 139 #ifdef CONFIG_PCIE2
 140 static struct pci_controller pcie2_hose;
 141 #endif
 142
 143 #ifdef CONFIG_PCIE3
 144 static struct pci_controller pcie3_hose;
 145 #endif
 146
 147 int first_free_busno=0;
 148 #ifdef CONFIG_PCI
 149 void pci_init_board(void)
 150 {
 151         volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 152         uint devdisr = gur->devdisr;
 153         uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
 154         uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
 155
 156         debug ("   pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n",
 157                         devdisr, io_sel, host_agent);
 158
 159         if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS))
 160                 printf ("    eTSEC1 is in sgmii mode.\n");
 161         if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS))
 162                 printf ("    eTSEC2 is in sgmii mode.\n");
 163         if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS))
 164                 printf ("    eTSEC3 is in sgmii mode.\n");
 165         if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII4_DIS))
 166                 printf ("    eTSEC4 is in sgmii mode.\n");
 167
 168
 169 #ifdef CONFIG_PCIE3
 170         {
 171                 volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR;
 172                 extern void fsl_pci_init(struct pci_controller *hose);
 173                 struct pci_controller *hose = &pcie3_hose;
 174                 int pcie_ep = (host_agent == 0) || (host_agent == 3) ||
 175                         (host_agent == 5) || (host_agent == 6);
 176                 int pcie_configured  = io_sel >= 1;
 177                 u32 temp32;
 178
 179                 if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
 180                         printf ("\n    PCIE3 connected to ULI as %s (base address %x)",
 181                                         pcie_ep ? "End Point" : "Root Complex",
 182                                         (uint)pci);
 183                         if (pci->pme_msg_det) {
 184                                 pci->pme_msg_det = 0xffffffff;
 185                                 debug (" with errors.  Clearing.  Now 0x%08x",pci->pme_msg_det);
 186                         }
 187                         printf ("\n");
 188
 189                         /* inbound */
 190                         pci_set_region(hose->regions + 0,
 191                                         CONFIG_SYS_PCI_MEMORY_BUS,
 192                                         CONFIG_SYS_PCI_MEMORY_PHYS,
 193                                         CONFIG_SYS_PCI_MEMORY_SIZE,
 194                                         PCI_REGION_MEM | PCI_REGION_MEMORY);
 195
 196                         /* outbound memory */
 197                         pci_set_region(hose->regions + 1,
 198                                         CONFIG_SYS_PCIE3_MEM_BASE,
 199                                         CONFIG_SYS_PCIE3_MEM_PHYS,
 200                                         CONFIG_SYS_PCIE3_MEM_SIZE,
 201                                         PCI_REGION_MEM);
 202
 203                         /* outbound io */
 204                         pci_set_region(hose->regions + 2,
 205                                         CONFIG_SYS_PCIE3_IO_BASE,
 206                                         CONFIG_SYS_PCIE3_IO_PHYS,
 207                                         CONFIG_SYS_PCIE3_IO_SIZE,
 208                                         PCI_REGION_IO);
 209
 210                         hose->region_count = 3;
 211                         hose->first_busno=first_free_busno;
 212                         pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
 213
 214                         fsl_pci_init(hose);
 215
 216                         first_free_busno=hose->last_busno+1;
 217                         printf ("    PCIE3 on bus %02x - %02x\n",
 218                                         hose->first_busno,hose->last_busno);
 219
 220                         /*
 221                          * Activate ULI1575 legacy chip by performing a fake
 222                          * memory access.  Needed to make ULI RTC work.
 223                          * Device 1d has the first on-board memory BAR.
 224                          */
 225
 226                         pci_hose_read_config_dword(hose, PCI_BDF(2, 0x1d, 0 ),
 227                                         PCI_BASE_ADDRESS_1, &temp32);
 228                         if (temp32 >= CONFIG_SYS_PCIE3_MEM_PHYS) {
 229                                 debug(" uli1572 read to %x\n", temp32);
 230                                 in_be32((unsigned *)temp32);
 231                         }
 232                 } else {
 233                         printf ("    PCIE3: disabled\n");
 234                 }
 235
 236         }
 237 #else
 238         gur->devdisr |= MPC85xx_DEVDISR_PCIE3; /* disable */
 239 #endif
 240
 241 #ifdef CONFIG_PCIE2
 242         {
 243                 volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
 244                 extern void fsl_pci_init(struct pci_controller *hose);
 245                 struct pci_controller *hose = &pcie2_hose;
 246                 int pcie_ep = (host_agent == 2) || (host_agent == 4) ||
 247                         (host_agent == 6);
 248                 int pcie_configured  = io_sel & 4;
 249
 250                 if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
 251                         printf ("\n    PCIE2 connected to Slot 1 as %s (base address %x)",
 252                                         pcie_ep ? "End Point" : "Root Complex",
 253                                         (uint)pci);
 254                         if (pci->pme_msg_det) {
 255                                 pci->pme_msg_det = 0xffffffff;
 256                                 debug (" with errors.  Clearing.  Now 0x%08x",pci->pme_msg_det);
 257                         }
 258                         printf ("\n");
 259
 260                         /* inbound */
 261                         pci_set_region(hose->regions + 0,
 262                                         CONFIG_SYS_PCI_MEMORY_BUS,
 263                                         CONFIG_SYS_PCI_MEMORY_PHYS,
 264                                         CONFIG_SYS_PCI_MEMORY_SIZE,
 265                                         PCI_REGION_MEM | PCI_REGION_MEMORY);
 266
 267                         /* outbound memory */
 268                         pci_set_region(hose->regions + 1,
 269                                         CONFIG_SYS_PCIE2_MEM_BASE,
 270                                         CONFIG_SYS_PCIE2_MEM_PHYS,
 271                                         CONFIG_SYS_PCIE2_MEM_SIZE,
 272                                         PCI_REGION_MEM);
 273
 274                         /* outbound io */
 275                         pci_set_region(hose->regions + 2,
 276                                         CONFIG_SYS_PCIE2_IO_BASE,
 277                                         CONFIG_SYS_PCIE2_IO_PHYS,
 278                                         CONFIG_SYS_PCIE2_IO_SIZE,
 279                                         PCI_REGION_IO);
 280
 281                         hose->region_count = 3;
 282                         hose->first_busno=first_free_busno;
 283                         pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
 284
 285                         fsl_pci_init(hose);
 286                         first_free_busno=hose->last_busno+1;
 287                         printf ("    PCIE2 on bus %02x - %02x\n",
 288                                         hose->first_busno,hose->last_busno);
 289
 290                 } else {
 291                         printf ("    PCIE2: disabled\n");
 292                 }
 293
 294         }
 295 #else
 296         gur->devdisr |= MPC85xx_DEVDISR_PCIE2; /* disable */
 297 #endif
 298 #ifdef CONFIG_PCIE1
 299         {
 300                 volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
 301                 extern void fsl_pci_init(struct pci_controller *hose);
 302                 struct pci_controller *hose = &pcie1_hose;
 303                 int pcie_ep = (host_agent == 1) || (host_agent == 4) ||
 304                         (host_agent == 5);
 305                 int pcie_configured  = io_sel & 6;
 306
 307                 if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
 308                         printf ("\n    PCIE1 connected to Slot 2 as %s (base address %x)",
 309                                         pcie_ep ? "End Point" : "Root Complex",
 310                                         (uint)pci);
 311                         if (pci->pme_msg_det) {
 312                                 pci->pme_msg_det = 0xffffffff;
 313                                 debug (" with errors.  Clearing.  Now 0x%08x",pci->pme_msg_det);
 314                         }
 315                         printf ("\n");
 316
 317                         /* inbound */
 318                         pci_set_region(hose->regions + 0,
 319                                         CONFIG_SYS_PCI_MEMORY_BUS,
 320                                         CONFIG_SYS_PCI_MEMORY_PHYS,
 321                                         CONFIG_SYS_PCI_MEMORY_SIZE,
 322                                         PCI_REGION_MEM | PCI_REGION_MEMORY);
 323
 324                         /* outbound memory */
 325                         pci_set_region(hose->regions + 1,
 326                                         CONFIG_SYS_PCIE1_MEM_BASE,
 327                                         CONFIG_SYS_PCIE1_MEM_PHYS,
 328                                         CONFIG_SYS_PCIE1_MEM_SIZE,
 329                                         PCI_REGION_MEM);
 330
 331                         /* outbound io */
 332                         pci_set_region(hose->regions + 2,
 333                                         CONFIG_SYS_PCIE1_IO_BASE,
 334                                         CONFIG_SYS_PCIE1_IO_PHYS,
 335                                         CONFIG_SYS_PCIE1_IO_SIZE,
 336                                         PCI_REGION_IO);
 337
 338                         hose->region_count = 3;
 339                         hose->first_busno=first_free_busno;
 340
 341                         pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
 342
 343                         fsl_pci_init(hose);
 344
 345                         first_free_busno=hose->last_busno+1;
 346                         printf("    PCIE1 on bus %02x - %02x\n",
 347                                         hose->first_busno,hose->last_busno);
 348
 349                 } else {
 350                         printf ("    PCIE1: disabled\n");
 351                 }
 352
 353         }
 354 #else
 355         gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
 356 #endif
 357 }
 358 #endif
 359
 360 int board_early_init_r(void)
 361 {
 362         unsigned int i;
 363         const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
 364         const u8 flash_esel = 2;
 365
 366         /*
 367          * Remap Boot flash + PROMJET region to caching-inhibited
 368          * so that flash can be erased properly.
 369          */
 370
 371         /* Invalidate any remaining lines of the flash from caches. */
 372         for (i = 0; i < 256*1024*1024; i+=32) {
 373                 asm volatile ("dcbi %0,%1": : "b" (flashbase), "r" (i));
 374                 asm volatile ("icbi %0,%1": : "b" (flashbase), "r" (i));
 375         }
 376
 377         /* invalidate existing TLB entry for flash + promjet */
 378         disable_tlb(flash_esel);
 379
 380         set_tlb(1, flashbase, flashbase,                /* tlb, epn, rpn */
 381                         MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */
 382                         0, flash_esel, BOOKE_PAGESZ_256M, 1);   /* ts, esel, tsize, iprot */
 383
 384         return 0;
 385 }
 386
 387 #ifdef CONFIG_GET_CLK_FROM_ICS307
 388 /* decode S[0-2] to Output Divider (OD) */
 389 static unsigned char ics307_S_to_OD[] = {
 390         10, 2, 8, 4, 5, 7, 3, 6
 391 };
 392
 393 /* Calculate frequency being generated by ICS307-02 clock chip based upon
 394  * the control bytes being programmed into it. */
 395 /* XXX: This function should probably go into a common library */
 396 static unsigned long
 397 ics307_clk_freq (unsigned char cw0, unsigned char cw1, unsigned char cw2)
 398 {
 399         const unsigned long InputFrequency = CONFIG_ICS307_REFCLK_HZ;
 400         unsigned long VDW = ((cw1 << 1) & 0x1FE) + ((cw2 >> 7) & 1);
 401         unsigned long RDW = cw2 & 0x7F;
 402         unsigned long OD = ics307_S_to_OD[cw0 & 0x7];
 403         unsigned long freq;
 404
 405         /* CLK1Frequency = InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD) */
 406
 407         /* cw0:  C1 C0 TTL F1 F0 S2 S1 S0
 408          * cw1:  V8 V7 V6 V5 V4 V3 V2 V1
 409          * cw2:  V0 R6 R5 R4 R3 R2 R1 R0
 410          *
 411          * R6:R0 = Reference Divider Word (RDW)
 412          * V8:V0 = VCO Divider Word (VDW)
 413          * S2:S0 = Output Divider Select (OD)
 414          * F1:F0 = Function of CLK2 Output
 415          * TTL = duty cycle
 416          * C1:C0 = internal load capacitance for cyrstal
 417          */
 418
 419         /* Adding 1 to get a "nicely" rounded number, but this needs
 420          * more tweaking to get a "properly" rounded number. */
 421
 422         freq = 1 + (InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD));
 423
 424         debug("ICS307: CW[0-2]: %02X %02X %02X => %u Hz\n", cw0, cw1, cw2,
 425                         freq);
 426         return freq;
 427 }
 428
 429 unsigned long get_board_sys_clk(ulong dummy)
 430 {
 431         return ics307_clk_freq (
 432                         in8(PIXIS_BASE + PIXIS_VSYSCLK0),
 433                         in8(PIXIS_BASE + PIXIS_VSYSCLK1),
 434                         in8(PIXIS_BASE + PIXIS_VSYSCLK2)
 435                         );
 436 }
 437
 438 unsigned long get_board_ddr_clk(ulong dummy)
 439 {
 440         return ics307_clk_freq (
 441                         in8(PIXIS_BASE + PIXIS_VDDRCLK0),
 442                         in8(PIXIS_BASE + PIXIS_VDDRCLK1),
 443                         in8(PIXIS_BASE + PIXIS_VDDRCLK2)
 444                         );
 445 }
 446 #else
 447 unsigned long get_board_sys_clk(ulong dummy)
 448 {
 449         u8 i;
 450         ulong val = 0;
 451
 452         i = in8(PIXIS_BASE + PIXIS_SPD);
 453         i &= 0x07;
 454
 455         switch (i) {
 456                 case 0:
 457                         val = 33333333;
 458                         break;
 459                 case 1:
 460                         val = 40000000;
 461                         break;
 462                 case 2:
 463                         val = 50000000;
 464                         break;
 465                 case 3:
 466                         val = 66666666;
 467                         break;
 468                 case 4:
 469                         val = 83333333;
 470                         break;
 471                 case 5:
 472                         val = 100000000;
 473                         break;
 474                 case 6:
 475                         val = 133333333;
 476                         break;
 477                 case 7:
 478                         val = 166666666;
 479                         break;
 480         }
 481
 482         return val;
 483 }
 484
 485 unsigned long get_board_ddr_clk(ulong dummy)
 486 {
 487         u8 i;
 488         ulong val = 0;
 489
 490         i = in8(PIXIS_BASE + PIXIS_SPD);
 491         i &= 0x38;
 492         i >>= 3;
 493
 494         switch (i) {
 495                 case 0:
 496                         val = 33333333;
 497                         break;
 498                 case 1:
 499                         val = 40000000;
 500                         break;
 501                 case 2:
 502                         val = 50000000;
 503                         break;
 504                 case 3:
 505                         val = 66666666;
 506                         break;
 507                 case 4:
 508                         val = 83333333;
 509                         break;
 510                 case 5:
 511                         val = 100000000;
 512                         break;
 513                 case 6:
 514                         val = 133333333;
 515                         break;
 516                 case 7:
 517                         val = 166666666;
 518                         break;
 519         }
 520         return val;
 521 }
 522 #endif
 523
 524 #if defined(CONFIG_OF_BOARD_SETUP)
 525 void ft_board_setup(void *blob, bd_t *bd)
 526 {
 527         int node, tmp[2];
 528         const char *path;
 529         ulong base, size;
 530
 531         ft_cpu_setup(blob, bd);
 532
 533         base = getenv_bootm_low();
 534         size = getenv_bootm_size();
 535
 536         fdt_fixup_memory(blob, (u64)base, (u64)size);
 537
 538         node = fdt_path_offset(blob, "/aliases");
 539         tmp[0] = 0;
 540         if (node >= 0) {
 541 #ifdef CONFIG_PCIE3
 542                 path = fdt_getprop(blob, node, "pci0", NULL);
 543                 if (path) {
 544                         tmp[1] = pcie3_hose.last_busno - pcie3_hose.first_busno;
 545                         do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
 546                 }
 547 #endif
 548 #ifdef CONFIG_PCIE2
 549                 path = fdt_getprop(blob, node, "pci1", NULL);
 550                 if (path) {
 551                         tmp[1] = pcie2_hose.last_busno - pcie2_hose.first_busno;
 552                         do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
 553                 }
 554 #endif
 555 #ifdef CONFIG_PCIE1
 556                 path = fdt_getprop(blob, node, "pci2", NULL);
 557                 if (path) {
 558                         tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
 559                         do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
 560                 }
 561 #endif
 562         }
 563 }
 564 #endif
 565
 566 #ifdef CONFIG_MP
 567 extern void cpu_mp_lmb_reserve(struct lmb *lmb);
 568
 569 void board_lmb_reserve(struct lmb *lmb)
 570 {
 571         cpu_mp_lmb_reserve(lmb);
 572 }
 573 #endif