board/freescale/mx25pdk/imximage.cfg

   1 /*
   2  * (C) Copyright 2009
   3  * Stefano Babic DENX Software Engineering sbabic@denx.de.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  *
   7  * Refer doc/README.imximage for more details about how-to configure
   8  * and create imximage boot image
   9  *
  10  * The syntax is taken as close as possible with the kwbimage
  11  */
  12
  13 /*
  14  * Boot Device : one of
  15  * spi, sd (the board has no nand neither onenand)
  16  */
  17 BOOT_FROM       sd
  18
  19 /*
  20  * Device Configuration Data (DCD)
  21  *
  22  * Each entry must have the format:
  23  * Addr-type           Address        Value
  24  *
  25  * where:
  26  *      Addr-type register length (1,2 or 4 bytes)
  27  *      Address   absolute address of the register
  28  *      value     value to be stored in the register
  29  */
  30 /* EIM config-CS5 init -- CPLD */
  31 DATA 4 0xB8002050 0x0000D843
  32 DATA 4 0xB8002054 0x22252521
  33 DATA 4 0xB8002058 0x22220A00
  34
  35 /* DDR2 init */
  36 DATA 4 0xB8001004 0x0076E83A
  37 DATA 4 0xB8001010 0x00000204
  38 DATA 4 0xB8001000 0x92210000
  39 DATA 4 0x80000f00 0x12344321
  40 DATA 4 0xB8001000 0xB2210000
  41 DATA 1 0x82000000 0xda
  42 DATA 1 0x83000000 0xda
  43 DATA 1 0x81000400 0xda
  44 DATA 1 0x80000333 0xda
  45
  46 DATA 4 0xB8001000 0x92210000
  47 DATA 1 0x80000400 0x12345678
  48
  49 DATA 4 0xB8001000 0xA2210000
  50 DATA 4 0x80000000 0x87654321
  51 DATA 4 0x80000000 0x87654321
  52
  53 DATA 4 0xB8001000 0xB2210000
  54 DATA 1 0x80000233 0xda
  55 DATA 1 0x81000780 0xda
  56 DATA 1 0x81000400 0xda
  57 DATA 4 0xB8001000 0x82216080
  58 DATA 4 0x43FAC454 0x00001000
  59
  60 DATA 4 0x53F80008 0x20034000
  61
  62 /* Enable the clocks */
  63 DATA 4 0x53f8000c 0x1fffffff
  64 DATA 4 0x53f80010 0xffffffff
  65 DATA 4 0x53f80014 0xfdfff