board/freescale/t102xrdb/cpld.c

   1 /**
   2  * Copyright 2014 Freescale Semiconductor
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  *
   6  * Freescale T1024RDB board-specific CPLD controlling supports.
   7  *
   8  * The following macros need to be defined:
   9  */
  10
  11 #include <common.h>
  12 #include <command.h>
  13 #include <asm/io.h>
  14 #include "cpld.h"
  15
  16 u8 cpld_read(unsigned int reg)
  17 {
  18         void *p = (void *)CONFIG_SYS_CPLD_BASE;
  19
  20         return in_8(p + reg);
  21 }
  22
  23 void cpld_write(unsigned int reg, u8 value)
  24 {
  25         void *p = (void *)CONFIG_SYS_CPLD_BASE;
  26
  27         out_8(p + reg, value);
  28 }
  29
  30 /**
  31  * Set the boot bank to the alternate bank
  32  */
  33 void cpld_set_altbank(void)
  34 {
  35         u8 reg = CPLD_READ(flash_csr);
  36
  37         reg = (reg & ~CPLD_BANK_SEL_MASK) | CPLD_LBMAP_ALTBANK;
  38
  39         CPLD_WRITE(flash_csr, reg);
  40         CPLD_WRITE(reset_ctl1, CPLD_LBMAP_RESET);
  41 }
  42
  43 /**
  44  * Set the boot bank to the default bank
  45  */
  46 void cpld_set_defbank(void)
  47 {
  48         u8 reg = CPLD_READ(flash_csr);
  49
  50         reg = (reg & ~CPLD_BANK_SEL_MASK) | CPLD_LBMAP_DFLTBANK;
  51
  52         CPLD_WRITE(flash_csr, reg);
  53         CPLD_WRITE(reset_ctl1, CPLD_LBMAP_RESET);
  54 }
  55
  56 static void cpld_dump_regs(void)
  57 {
  58         printf("cpld_ver         = 0x%02x\n", CPLD_READ(cpld_ver));
  59         printf("cpld_ver_sub     = 0x%02x\n", CPLD_READ(cpld_ver_sub));
  60         printf("hw_ver           = 0x%02x\n", CPLD_READ(hw_ver));
  61         printf("sw_ver           = 0x%02x\n", CPLD_READ(sw_ver));
  62         printf("reset_ctl1       = 0x%02x\n", CPLD_READ(reset_ctl1));
  63         printf("reset_ctl2       = 0x%02x\n", CPLD_READ(reset_ctl2));
  64         printf("int_status       = 0x%02x\n", CPLD_READ(int_status));
  65         printf("flash_csr        = 0x%02x\n", CPLD_READ(flash_csr));
  66         printf("fan_ctl_status   = 0x%02x\n", CPLD_READ(fan_ctl_status));
  67         printf("led_ctl_status   = 0x%02x\n", CPLD_READ(led_ctl_status));
  68         printf("sfp_ctl_status   = 0x%02x\n", CPLD_READ(sfp_ctl_status));
  69         printf("misc_ctl_status  = 0x%02x\n", CPLD_READ(misc_ctl_status));
  70         printf("boot_override    = 0x%02x\n", CPLD_READ(boot_override));
  71         printf("boot_config1     = 0x%02x\n", CPLD_READ(boot_config1));
  72         printf("boot_config2     = 0x%02x\n", CPLD_READ(boot_config2));
  73         putc('\n');
  74 }
  75
  76 int do_cpld(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
  77 {
  78         int rc = 0;
  79
  80         if (argc <= 1)
  81                 return cmd_usage(cmdtp);
  82
  83         if (strcmp(argv[1], "reset") == 0) {
  84                 if (strcmp(argv[2], "altbank") == 0)
  85                         cpld_set_altbank();
  86                 else
  87                         cpld_set_defbank();
  88         } else if (strcmp(argv[1], "dump") == 0) {
  89                 cpld_dump_regs();
  90         } else {
  91                 rc = cmd_usage(cmdtp);
  92         }
  93
  94         return rc;
  95 }
  96
  97 U_BOOT_CMD(
  98         cpld, CONFIG_SYS_MAXARGS, 1, do_cpld,
  99         "Reset the board or alternate bank",
 100         "reset - hard reset to default bank\n"
 101         "cpld reset altbank - reset to alternate bank\n"
 102         "cpld dump - display the CPLD registers\n"
 103         );