board/gateworks/gw_ventana/common.h

   1 /*
   2  * Copyright (C) 2013 Gateworks Corporation
   3  *
   4  * Author: Tim Harvey <tharvey@gateworks.com>
   5  *
   6  * SPDX-License-Identifier: GPL-2.0+
   7  */
   8
   9 #ifndef _GWVENTANA_COMMON_H_
  10 #define _GWVENTANA_COMMON_H_
  11
  12 #include "ventana_eeprom.h"
  13
  14 /* GPIO's common to all baseboards */
  15 #define GP_PHY_RST      IMX_GPIO_NR(1, 30)
  16 #define GP_USB_OTG_PWR  IMX_GPIO_NR(3, 22)
  17 #define GP_SD3_CD       IMX_GPIO_NR(7, 0)
  18 #define GP_RS232_EN     IMX_GPIO_NR(2, 11)
  19 #define GP_MSATA_SEL    IMX_GPIO_NR(2, 8)
  20 #define GP_SD3_VSELECT  IMX_GPIO_NR(6, 14)
  21
  22 #define UART_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE |             \
  23         PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |               \
  24         PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
  25
  26 #define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE |             \
  27         PAD_CTL_PUS_47K_UP  | PAD_CTL_SPEED_LOW |               \
  28         PAD_CTL_DSE_80ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
  29
  30 #define ENET_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE |             \
  31         PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED   |             \
  32         PAD_CTL_DSE_40ohm   | PAD_CTL_HYS)
  33
  34 #define SPI_PAD_CTRL (PAD_CTL_HYS |                             \
  35         PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_MED |             \
  36         PAD_CTL_DSE_40ohm     | PAD_CTL_SRE_FAST)
  37
  38 #define I2C_PAD_CTRL  (PAD_CTL_PUS_100K_UP |                    \
  39         PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS |   \
  40         PAD_CTL_ODE | PAD_CTL_SRE_FAST)
  41
  42 #define IRQ_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE |              \
  43         PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |               \
  44         PAD_CTL_DSE_34ohm | PAD_CTL_HYS | PAD_CTL_SRE_FAST)
  45
  46 #define DIO_PAD_CFG   (MUX_PAD_CTRL(IRQ_PAD_CTRL) | MUX_MODE_SION)
  47
  48 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
  49
  50 /*
  51  * each baseboard has an optional set user configurable Digital IO lines which
  52  * can be pinmuxed as a GPIO or in some cases a PWM
  53  */
  54 struct dio_cfg {
  55         iomux_v3_cfg_t gpio_padmux[2];
  56         unsigned gpio_param;
  57         iomux_v3_cfg_t pwm_padmux[2];
  58         unsigned pwm_param;
  59 };
  60
  61 struct ventana {
  62         /* pinmux */
  63         iomux_v3_cfg_t const *gpio_pads;
  64         int num_pads;
  65         /* DIO pinmux/val */
  66         struct dio_cfg *dio_cfg;
  67         int dio_num;
  68         /* various gpios (0 if non-existent) */
  69         int leds[3];
  70         int pcie_rst;
  71         int mezz_pwren;
  72         int mezz_irq;
  73         int rs485en;
  74         int gps_shdn;
  75         int vidin_en;
  76         int dioi2c_en;
  77         int pcie_sson;
  78         int usb_sel;
  79         int wdis;
  80         int msata_en;
  81         int rs232_en;
  82         /* various features */
  83         bool usd_vsel;
  84 };
  85
  86 extern struct ventana gpio_cfg[GW_UNKNOWN];
  87
  88 /* configure i2c iomux */
  89 void setup_ventana_i2c(void);
  90 /* configure uart iomux */
  91 void setup_iomux_uart(void);
  92 /* conifgure PMIC */
  93 void setup_pmic(void);
  94 /* configure gpio iomux/defaults */
  95 void setup_iomux_gpio(int board, struct ventana_board_info *);
  96 /* late setup of GPIO (configuration per baseboard and env) */
  97 void setup_board_gpio(int board, struct ventana_board_info *);
  98
  99 #endif /* #ifndef _GWVENTANA_COMMON_H_ */