board/pm828/flash.c

   1 /*
   2  * (C) Copyright 2001-2004
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * Flash Routines for Intel devices
   6  *
   7  *--------------------------------------------------------------------
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #include <common.h>
  12 #include <mpc8xx.h>
  13
  14
  15 flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
  16
  17 /*-----------------------------------------------------------------------
  18  */
  19 ulong flash_get_size (volatile unsigned long *baseaddr,
  20                                           flash_info_t * info)
  21 {
  22         short i;
  23         unsigned long flashtest_h, flashtest_l;
  24
  25         info->sector_count = info->size = 0;
  26         info->flash_id = FLASH_UNKNOWN;
  27
  28         /* Write query command sequence and test FLASH answer
  29          */
  30         baseaddr[0] = 0x00980098;
  31         baseaddr[1] = 0x00980098;
  32
  33         flashtest_h = baseaddr[0];      /* manufacturer ID      */
  34         flashtest_l = baseaddr[1];
  35
  36         if (flashtest_h != INTEL_MANUFACT || flashtest_l != INTEL_MANUFACT)
  37                 return (0);             /* no or unknown flash  */
  38
  39         flashtest_h = baseaddr[2];      /* device ID            */
  40         flashtest_l = baseaddr[3];
  41
  42         if (flashtest_h != flashtest_l)
  43                 return (0);
  44
  45         switch (flashtest_h) {
  46         case INTEL_ID_28F160C3B:
  47                 info->flash_id = FLASH_28F160C3B;
  48                 info->sector_count = 39;
  49                 info->size = 0x00800000;        /* 4 * 2 MB = 8 MB      */
  50                 break;
  51         case INTEL_ID_28F160F3B:
  52                 info->flash_id = FLASH_28F160F3B;
  53                 info->sector_count = 39;
  54                 info->size = 0x00800000;        /* 4 * 2 MB = 8 MB      */
  55                 break;
  56         case INTEL_ID_28F640C3B:
  57                 info->flash_id = FLASH_28F640C3B;
  58                 info->sector_count = 135;
  59                 info->size = 0x02000000;        /* 16 * 2 MB = 32 MB    */
  60                 break;
  61         default:
  62                 return (0);                     /* no or unknown flash  */
  63         }
  64
  65         info->flash_id |= INTEL_MANUFACT << 16; /* set manufacturer offset */
  66
  67         if (info->flash_id & FLASH_BTYPE) {
  68                 volatile unsigned long *tmp = baseaddr;
  69
  70                 /* set up sector start adress table (bottom sector type)
  71                  * AND unlock the sectors (if our chip is 160C3 or 640c3)
  72                  */
  73                 for (i = 0; i < info->sector_count; i++) {
  74                         if (((info->flash_id & FLASH_TYPEMASK) == FLASH_28F160C3B) ||
  75                             ((info->flash_id & FLASH_TYPEMASK) == FLASH_28F640C3B)) {
  76                                 tmp[0] = 0x00600060;
  77                                 tmp[1] = 0x00600060;
  78                                 tmp[0] = 0x00D000D0;
  79                                 tmp[1] = 0x00D000D0;
  80                         }
  81                         info->start[i] = (uint) tmp;
  82                         tmp += i < 8 ? 0x2000 : 0x10000; /* pointer arith       */
  83                 }
  84         }
  85
  86         memset (info->protect, 0, info->sector_count);
  87
  88         baseaddr[0] = 0x00FF00FF;
  89         baseaddr[1] = 0x00FF00FF;
  90
  91         return (info->size);
  92 }
  93
  94 /*-----------------------------------------------------------------------
  95  */
  96 unsigned long flash_init (void)
  97 {
  98         unsigned long size_b0 = 0;
  99         int i;
 100
 101         /* Init: no FLASHes known
 102          */
 103         for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 104                 flash_info[i].flash_id = FLASH_UNKNOWN;
 105         }
 106
 107         /* Static FLASH Bank configuration here (only one bank) */
 108
 109         size_b0 = flash_get_size ((ulong *) CONFIG_SYS_FLASH0_BASE, &flash_info[0]);
 110         if (flash_info[0].flash_id == FLASH_UNKNOWN || size_b0 == 0) {
 111                 printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
 112                                 size_b0, size_b0 >> 20);
 113         }
 114
 115         /* protect monitor and environment sectors
 116          */
 117
 118 #ifndef CONFIG_BOOT_ROM
 119         /* If U-Boot is  booted from ROM the CONFIG_SYS_MONITOR_BASE > CONFIG_SYS_FLASH0_BASE
 120          * but we shouldn't protect it.
 121          */
 122
 123 # if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH0_BASE
 124         flash_protect (FLAG_PROTECT_SET,
 125                        CONFIG_SYS_MONITOR_BASE,
 126                        CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]
 127         );
 128 # endif
 129 #endif  /* CONFIG_BOOT_ROM */
 130
 131 #if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
 132 # ifndef  CONFIG_ENV_SIZE
 133 #  define CONFIG_ENV_SIZE       CONFIG_ENV_SECT_SIZE
 134 # endif
 135         flash_protect (FLAG_PROTECT_SET,
 136                        CONFIG_ENV_ADDR,
 137                        CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
 138 #endif
 139
 140         return (size_b0);
 141 }
 142
 143 /*-----------------------------------------------------------------------
 144  */
 145 void flash_print_info (flash_info_t * info)
 146 {
 147         int i;
 148
 149         if (info->flash_id == FLASH_UNKNOWN) {
 150                 printf ("missing or unknown FLASH type\n");
 151                 return;
 152         }
 153
 154         switch ((info->flash_id >> 16) & 0xff) {
 155         case 0x89:
 156                 printf ("INTEL ");
 157                 break;
 158         default:
 159                 printf ("Unknown Vendor ");
 160                 break;
 161         }
 162
 163         switch (info->flash_id & FLASH_TYPEMASK) {
 164         case FLASH_28F160C3B:
 165                 printf ("28F160C3B (16 M, bottom sector)\n");
 166                 break;
 167         case FLASH_28F160F3B:
 168                 printf ("28F160F3B (16 M, bottom sector)\n");
 169                 break;
 170         case FLASH_28F640C3B:
 171                 printf ("28F640C3B (64 M, bottom sector)\n");
 172                 break;
 173         default:
 174                 printf ("Unknown Chip Type\n");
 175                 break;
 176         }
 177
 178         printf ("  Size: %ld MB in %d Sectors\n",
 179                         info->size >> 20, info->sector_count);
 180
 181         printf ("  Sector Start Addresses:");
 182         for (i = 0; i < info->sector_count; ++i) {
 183                 if ((i % 5) == 0)
 184                         printf ("\n   ");
 185                 printf (" %08lX%s",
 186                         info->start[i],
 187                         info->protect[i] ? " (RO)" : "     "
 188                 );
 189         }
 190         printf ("\n");
 191 }
 192
 193 /*-----------------------------------------------------------------------
 194  */
 195 int flash_erase (flash_info_t * info, int s_first, int s_last)
 196 {
 197         int flag, prot, sect;
 198         ulong start, now, last;
 199
 200         if ((s_first < 0) || (s_first > s_last)) {
 201                 if (info->flash_id == FLASH_UNKNOWN) {
 202                         printf ("- missing\n");
 203                 } else {
 204                         printf ("- no sectors to erase\n");
 205                 }
 206                 return 1;
 207         }
 208
 209         prot = 0;
 210         for (sect = s_first; sect <= s_last; sect++) {
 211                 if (info->protect[sect])
 212                         prot++;
 213         }
 214
 215         if (prot) {
 216                 printf ("- Warning: %d protected sectors will not be erased!\n",
 217                                 prot);
 218         } else {
 219                 printf ("\n");
 220         }
 221
 222         /* Start erase on unprotected sectors
 223          */
 224         for (sect = s_first; sect <= s_last; sect++) {
 225                 volatile ulong *addr =
 226                                 (volatile unsigned long *) info->start[sect];
 227
 228                 start = get_timer (0);
 229                 last = start;
 230                 if (info->protect[sect] == 0) {
 231                         /* Disable interrupts which might cause a timeout here
 232                          */
 233                         flag = disable_interrupts ();
 234
 235                         /* Erase the block
 236                          */
 237                         addr[0] = 0x00200020;
 238                         addr[1] = 0x00200020;
 239                         addr[0] = 0x00D000D0;
 240                         addr[1] = 0x00D000D0;
 241
 242                         /* re-enable interrupts if necessary
 243                          */
 244                         if (flag)
 245                                 enable_interrupts ();
 246
 247                         /* wait at least 80us - let's wait 1 ms
 248                          */
 249                         udelay (1000);
 250
 251                         last = start;
 252                         while ((addr[0] & 0x00800080) != 0x00800080 ||
 253                                    (addr[1] & 0x00800080) != 0x00800080) {
 254                                 if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 255                                         printf ("Timeout (erase suspended!)\n");
 256                                         /* Suspend erase
 257                                          */
 258                                         addr[0] = 0x00B000B0;
 259                                         addr[1] = 0x00B000B0;
 260                                         goto DONE;
 261                                 }
 262                                 /* show that we're waiting
 263                                  */
 264                                 if ((now - last) > 1000) {      /* every second */
 265                                         serial_putc ('.');
 266                                         last = now;
 267                                 }
 268                         }
 269                         if (addr[0] & 0x00220022 || addr[1] & 0x00220022) {
 270                                 printf ("*** ERROR: erase failed!\n");
 271                                 goto DONE;
 272                         }
 273                 }
 274                 /* Clear status register and reset to read mode
 275                  */
 276                 addr[0] = 0x00500050;
 277                 addr[1] = 0x00500050;
 278                 addr[0] = 0x00FF00FF;
 279                 addr[1] = 0x00FF00FF;
 280         }
 281
 282         printf (" done\n");
 283
 284 DONE:
 285         return 0;
 286 }
 287
 288 static int write_word (flash_info_t *, volatile unsigned long *, ulong);
 289
 290 /*-----------------------------------------------------------------------
 291  * Copy memory to flash, returns:
 292  * 0 - OK
 293  * 1 - write timeout
 294  * 2 - Flash not erased
 295  */
 296 int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 297 {
 298         ulong v;
 299         int i, l, cc = cnt, res = 0;
 300
 301
 302         for (v=0; cc > 0; addr += 4, cc -= 4 - l) {
 303                 l = (addr & 3);
 304                 addr &= ~3;
 305
 306                 for (i = 0; i < 4; i++) {
 307                         v = (v << 8) + (i < l || i - l >= cc ?
 308                                 *((unsigned char *) addr + i) : *src++);
 309                 }
 310
 311                 if ((res = write_word (info, (volatile unsigned long *) addr, v)) != 0)
 312                         break;
 313         }
 314
 315         return (res);
 316 }
 317
 318 /*-----------------------------------------------------------------------
 319  * Write a word to Flash, returns:
 320  * 0 - OK
 321  * 1 - write timeout
 322  * 2 - Flash not erased
 323  */
 324 static int write_word (flash_info_t * info, volatile unsigned long *addr,
 325                                            ulong data)
 326 {
 327         int flag, res = 0;
 328         ulong start;
 329
 330         /* Check if Flash is (sufficiently) erased
 331          */
 332         if ((*addr & data) != data)
 333                 return (2);
 334
 335         /* Disable interrupts which might cause a timeout here
 336          */
 337         flag = disable_interrupts ();
 338
 339         *addr = 0x00400040;
 340         *addr = data;
 341
 342         /* re-enable interrupts if necessary
 343          */
 344         if (flag)
 345                 enable_interrupts ();
 346
 347         start = get_timer (0);
 348         while ((*addr & 0x00800080) != 0x00800080) {
 349                 if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 350                         /* Suspend program
 351                          */
 352                         *addr = 0x00B000B0;
 353                         res = 1;
 354                         goto OUT;
 355                 }
 356         }
 357
 358         if (*addr & 0x00220022) {
 359                 printf ("*** ERROR: program failed!\n");
 360                 res = 1;
 361         }
 362
 363 OUT:
 364         /* Clear status register and reset to read mode
 365          */
 366         *addr = 0x00500050;
 367         *addr = 0x00FF00FF;
 368
 369         return (res);
 370 }