]> git.ipfire.org Git - people/ms/u-boot.git/blob - board/renesas/rsk7203/rsk7203.c
Merge branch 'u-boot/master' into u-boot-arm/master
[people/ms/u-boot.git] / board / renesas / rsk7203 / rsk7203.c
1 /*
2 * Copyright (C) 2008 Nobuhiro Iwamatsu
3 * Copyright (C) 2008 Renesas Solutions Corp.
4 *
5 * u-boot/board/rsk7203/rsk7203.c
6 *
7 * SPDX-License-Identifier: GPL-2.0+
8 */
9
10 #include <common.h>
11 #include <net.h>
12 #include <netdev.h>
13 #include <asm/io.h>
14 #include <asm/processor.h>
15
16 DECLARE_GLOBAL_DATA_PTR;
17
18 int checkboard(void)
19 {
20 puts("BOARD: Renesas Technology RSK7203\n");
21 return 0;
22 }
23
24 int board_init(void)
25 {
26 return 0;
27 }
28
29 int dram_init(void)
30 {
31 gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
32 gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
33 printf("DRAM: %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));
34 return 0;
35 }
36
37 void led_set_state(unsigned short value)
38 {
39 }
40
41 /*
42 * The RSK board has the SMSC9118 wired up 'incorrectly'.
43 * Byte-swapping is necessary, and so poor performance is inevitable.
44 * This problem cannot evade by the swap function of CHIP, this can
45 * evade by software Byte-swapping.
46 * And this has problem by FIFO access only. pkt_data_pull/pkt_data_push
47 * functions necessary to solve this problem.
48 */
49 u32 pkt_data_pull(struct eth_device *dev, u32 addr)
50 {
51 volatile u16 *addr_16 = (u16 *)(dev->iobase + addr);
52 return (u32)((swab16(*addr_16) << 16) & 0xFFFF0000)\
53 | swab16(*(addr_16 + 1));
54 }
55
56 void pkt_data_push(struct eth_device *dev, u32 addr, u32 val)
57 {
58 addr += dev->iobase;
59 *(volatile u16 *)(addr + 2) = swab16((u16)val);
60 *(volatile u16 *)(addr) = swab16((u16)(val >> 16));
61 }
62
63 int board_eth_init(bd_t *bis)
64 {
65 int rc = 0;
66 #ifdef CONFIG_SMC911X
67 rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
68 #endif
69 return rc;
70 }