board/renesas/ulcb/ulcb.c

   1 /*
   2  * board/renesas/ulcb/ulcb.c
   3  *     This file is ULCB board support.
   4  *
   5  * Copyright (C) 2017 Renesas Electronics Corporation
   6  *
   7  * SPDX-License-Identifier: GPL-2.0+
   8  */
   9
  10 #include <common.h>
  11 #include <malloc.h>
  12 #include <netdev.h>
  13 #include <dm.h>
  14 #include <dm/platform_data/serial_sh.h>
  15 #include <asm/processor.h>
  16 #include <asm/mach-types.h>
  17 #include <asm/io.h>
  18 #include <linux/errno.h>
  19 #include <asm/arch/sys_proto.h>
  20 #include <asm/gpio.h>
  21 #include <asm/arch/gpio.h>
  22 #include <asm/arch/rmobile.h>
  23 #include <asm/arch/rcar-mstp.h>
  24 #include <asm/arch/sh_sdhi.h>
  25 #include <i2c.h>
  26 #include <mmc.h>
  27
  28 DECLARE_GLOBAL_DATA_PTR;
  29
  30 #define CPGWPCR 0xE6150904
  31 #define CPGWPR  0xE615090C
  32
  33 #define CLK2MHZ(clk)    (clk / 1000 / 1000)
  34 void s_init(void)
  35 {
  36         struct rcar_rwdt *rwdt = (struct rcar_rwdt *)RWDT_BASE;
  37         struct rcar_swdt *swdt = (struct rcar_swdt *)SWDT_BASE;
  38
  39         /* Watchdog init */
  40         writel(0xA5A5A500, &rwdt->rwtcsra);
  41         writel(0xA5A5A500, &swdt->swtcsra);
  42
  43         writel(0xA5A50000, CPGWPCR);
  44         writel(0xFFFFFFFF, CPGWPR);
  45 }
  46
  47 #define GSX_MSTP112             BIT(12) /* 3DG */
  48 #define TMU0_MSTP125            BIT(25) /* secure */
  49 #define TMU1_MSTP124            BIT(24) /* non-secure */
  50 #define SCIF2_MSTP310           BIT(10) /* SCIF2 */
  51 #define ETHERAVB_MSTP812        BIT(12)
  52 #define DVFS_MSTP926            BIT(26)
  53 #define SD0_MSTP314             BIT(14)
  54 #define SD1_MSTP313             BIT(13)
  55 #define SD2_MSTP312             BIT(12) /* either MMC0 */
  56
  57 #define SD0CKCR                 0xE6150074
  58 #define SD1CKCR                 0xE6150078
  59 #define SD2CKCR                 0xE6150268
  60 #define SD3CKCR                 0xE615026C
  61
  62 int board_early_init_f(void)
  63 {
  64         /* TMU0,1 */            /* which use ? */
  65         mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125 | TMU1_MSTP124);
  66         /* SCIF2 */
  67         mstp_clrbits_le32(MSTPSR3, SMSTPCR3, SCIF2_MSTP310);
  68         /* EHTERAVB */
  69         mstp_clrbits_le32(MSTPSR8, SMSTPCR8, ETHERAVB_MSTP812);
  70         /* eMMC */
  71         mstp_clrbits_le32(MSTPSR3, SMSTPCR3, SD1_MSTP313 | SD2_MSTP312);
  72         /* SDHI0 */
  73         mstp_clrbits_le32(MSTPSR3, SMSTPCR3, SD0_MSTP314);
  74
  75         writel(0, SD0CKCR);
  76         writel(0, SD1CKCR);
  77         writel(0, SD2CKCR);
  78         writel(0, SD3CKCR);
  79
  80 #if defined(CONFIG_SYS_I2C) && defined(CONFIG_SYS_I2C_SH)
  81         /* DVFS for reset */
  82         mstp_clrbits_le32(MSTPSR9, SMSTPCR9, DVFS_MSTP926);
  83 #endif
  84         return 0;
  85 }
  86
  87 /* SYSC */
  88 /* R/- 32 Power status register 2(3DG) */
  89 #define SYSC_PWRSR2     0xE6180100
  90 /* -/W 32 Power resume control register 2 (3DG) */
  91 #define SYSC_PWRONCR2   0xE618010C
  92
  93 int board_init(void)
  94 {
  95         /* adress of boot parameters */
  96         gd->bd->bi_boot_params = CONFIG_SYS_TEXT_BASE + 0x50000;
  97
  98         /* Init PFC controller */
  99 #if defined(CONFIG_R8A7795)
 100         r8a7795_pinmux_init();
 101 #elif defined(CONFIG_R8A7796)
 102         r8a7796_pinmux_init();
 103 #endif
 104
 105         /* USB1 pull-up */
 106         setbits_le32(PFC_PUEN6, PUEN_USB1_OVC | PUEN_USB1_PWEN);
 107
 108 #ifdef CONFIG_RAVB
 109         /* EtherAVB Enable */
 110         /* GPSR2 */
 111         gpio_request(GPIO_GFN_AVB_AVTP_CAPTURE_A, NULL);
 112         gpio_request(GPIO_GFN_AVB_AVTP_MATCH_A, NULL);
 113         gpio_request(GPIO_GFN_AVB_LINK, NULL);
 114         gpio_request(GPIO_GFN_AVB_PHY_INT, NULL);
 115         gpio_request(GPIO_GFN_AVB_MAGIC, NULL);
 116         gpio_request(GPIO_GFN_AVB_MDC, NULL);
 117
 118         /* IPSR0 */
 119         gpio_request(GPIO_IFN_AVB_MDC, NULL);
 120         gpio_request(GPIO_IFN_AVB_MAGIC, NULL);
 121         gpio_request(GPIO_IFN_AVB_PHY_INT, NULL);
 122         gpio_request(GPIO_IFN_AVB_LINK, NULL);
 123         gpio_request(GPIO_IFN_AVB_AVTP_MATCH_A, NULL);
 124         gpio_request(GPIO_IFN_AVB_AVTP_CAPTURE_A, NULL);
 125         /* IPSR1 */
 126         gpio_request(GPIO_FN_AVB_AVTP_PPS, NULL);
 127         /* IPSR2 */
 128         gpio_request(GPIO_FN_AVB_AVTP_MATCH_B, NULL);
 129         /* IPSR3 */
 130         gpio_request(GPIO_FN_AVB_AVTP_CAPTURE_B, NULL);
 131
 132         /* AVB_PHY_RST */
 133         gpio_request(GPIO_GP_2_10, NULL);
 134         gpio_direction_output(GPIO_GP_2_10, 0);
 135         mdelay(20);
 136         gpio_set_value(GPIO_GP_2_10, 1);
 137         udelay(1);
 138 #endif
 139
 140         return 0;
 141 }
 142
 143 static struct eth_pdata salvator_x_ravb_platdata = {
 144         .iobase         = 0xE6800000,
 145         .phy_interface  = 0,
 146         .max_speed      = 1000,
 147 };
 148
 149 U_BOOT_DEVICE(salvator_x_ravb) = {
 150         .name           = "ravb",
 151         .platdata       = &salvator_x_ravb_platdata,
 152 };
 153
 154 #ifdef CONFIG_SH_SDHI
 155 int board_mmc_init(bd_t *bis)
 156 {
 157         int ret = -ENODEV;
 158
 159         /* SDHI0 */
 160         gpio_request(GPIO_GFN_SD0_DAT0, NULL);
 161         gpio_request(GPIO_GFN_SD0_DAT1, NULL);
 162         gpio_request(GPIO_GFN_SD0_DAT2, NULL);
 163         gpio_request(GPIO_GFN_SD0_DAT3, NULL);
 164         gpio_request(GPIO_GFN_SD0_CLK, NULL);
 165         gpio_request(GPIO_GFN_SD0_CMD, NULL);
 166         gpio_request(GPIO_GFN_SD0_CD, NULL);
 167         gpio_request(GPIO_GFN_SD0_WP, NULL);
 168
 169         gpio_request(GPIO_GP_5_2, NULL);
 170         gpio_request(GPIO_GP_5_1, NULL);
 171         gpio_direction_output(GPIO_GP_5_2, 1);  /* power on */
 172         gpio_direction_output(GPIO_GP_5_1, 1);  /* 1: 3.3V, 0: 1.8V */
 173
 174         ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI0_BASE, 0,
 175                            SH_SDHI_QUIRK_64BIT_BUF);
 176         if (ret)
 177                 return ret;
 178
 179         /* SDHI1/SDHI2 eMMC */
 180         gpio_request(GPIO_GFN_SD1_DAT0, NULL);
 181         gpio_request(GPIO_GFN_SD1_DAT1, NULL);
 182         gpio_request(GPIO_GFN_SD1_DAT2, NULL);
 183         gpio_request(GPIO_GFN_SD1_DAT3, NULL);
 184         gpio_request(GPIO_GFN_SD2_DAT0, NULL);
 185         gpio_request(GPIO_GFN_SD2_DAT1, NULL);
 186         gpio_request(GPIO_GFN_SD2_DAT2, NULL);
 187         gpio_request(GPIO_GFN_SD2_DAT3, NULL);
 188         gpio_request(GPIO_GFN_SD2_CLK, NULL);
 189 #if defined(CONFIG_R8A7795)
 190         gpio_request(GPIO_GFN_SD2_CMD, NULL);
 191 #elif defined(CONFIG_R8A7796)
 192         gpio_request(GPIO_FN_SD2_CMD, NULL);
 193 #else
 194 #error Only R8A7795 and R87796 is supported
 195 #endif
 196         gpio_request(GPIO_GP_5_3, NULL);
 197         gpio_request(GPIO_GP_5_9, NULL);
 198         gpio_direction_output(GPIO_GP_5_3, 0);  /* 1: 3.3V, 0: 1.8V */
 199         gpio_direction_output(GPIO_GP_5_9, 0);  /* 1: 3.3V, 0: 1.8V */
 200
 201         ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI2_BASE, 1,
 202                            SH_SDHI_QUIRK_64BIT_BUF);
 203
 204         return ret;
 205 }
 206 #endif
 207
 208 int dram_init(void)
 209 {
 210         gd->ram_size = PHYS_SDRAM_1_SIZE;
 211 #if (CONFIG_NR_DRAM_BANKS >= 2)
 212         gd->ram_size += PHYS_SDRAM_2_SIZE;
 213 #endif
 214 #if (CONFIG_NR_DRAM_BANKS >= 3)
 215         gd->ram_size += PHYS_SDRAM_3_SIZE;
 216 #endif
 217 #if (CONFIG_NR_DRAM_BANKS >= 4)
 218         gd->ram_size += PHYS_SDRAM_4_SIZE;
 219 #endif
 220
 221         return 0;
 222 }
 223
 224 int dram_init_banksize(void)
 225 {
 226         gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 227         gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 228 #if (CONFIG_NR_DRAM_BANKS >= 2)
 229         gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
 230         gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
 231 #endif
 232 #if (CONFIG_NR_DRAM_BANKS >= 3)
 233         gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
 234         gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
 235 #endif
 236 #if (CONFIG_NR_DRAM_BANKS >= 4)
 237         gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
 238         gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
 239 #endif
 240         return 0;
 241 }
 242
 243 const struct rmobile_sysinfo sysinfo = {
 244         CONFIG_RCAR_BOARD_STRING
 245 };
 246
 247 static const struct sh_serial_platdata serial_platdata = {
 248         .base = SCIF2_BASE,
 249         .type = PORT_SCIF,
 250         .clk = CONFIG_SH_SCIF_CLK_FREQ,
 251         .clk_mode = INT_CLK,
 252 };
 253
 254 U_BOOT_DEVICE(salvator_x_scif2) = {
 255         .name = "serial_sh",
 256         .platdata = &serial_platdata,
 257 };