2 * Copyright (C) 2003 ETC s.r.o.
4 * This code was inspired by Marius Groeger and Kyle Harris code
5 * available in other board ports for U-Boot
7 * See file CREDITS for list of people who contributed to this
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of
13 * the License, or (at your option) any later version.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
25 * Written by Peter Figuli <peposh@etc.sk>, 2003.
34 * This code should handle CFI FLASH memory device. This code is very
35 * minimalistic approach without many essential error handling code as well.
36 * Because U-Boot actually is missing smart handling of FLASH device,
37 * we just set flash_id to anything else to FLASH_UNKNOW, so common code
38 * can call us without any restrictions.
39 * TODO: Add CFI Query, to be able to determine FLASH device.
40 * TODO: Add error handling code
41 * NOTE: This code was tested with BUS_WIDTH 4 and ITERLEAVE 2 only, but
42 * hopefully may work with other configurations.
45 #if ( SCB9328_FLASH_BUS_WIDTH == 1 )
46 # define FLASH_BUS vu_char
47 # define FLASH_BUS_RET u_char
48 # if ( SCB9328_FLASH_INTERLEAVE == 1 )
49 # define FLASH_CMD( x ) x
51 # error "With 8bit bus only one chip is allowed"
55 #elif ( SCB9328_FLASH_BUS_WIDTH == 2 )
56 # define FLASH_BUS vu_short
57 # define FLASH_BUS_RET u_short
58 # if ( SCB9328_FLASH_INTERLEAVE == 1 )
59 # define FLASH_CMD( x ) x
60 # elif ( SCB9328_FLASH_INTERLEAVE == 2 )
61 # define FLASH_CMD( x ) (( x << 8 )| x )
63 # error "With 16bit bus only 1 or 2 chip(s) are allowed"
67 #elif ( SCB9328_FLASH_BUS_WIDTH == 4 )
68 # define FLASH_BUS vu_long
69 # define FLASH_BUS_RET u_long
70 # if ( SCB9328_FLASH_INTERLEAVE == 1 )
71 # define FLASH_CMD( x ) x
72 # elif ( SCB9328_FLASH_INTERLEAVE == 2 )
73 # define FLASH_CMD( x ) (( x << 16 )| x )
74 # elif ( SCB9328_FLASH_INTERLEAVE == 4 )
75 # define FLASH_CMD( x ) (( x << 24 )|( x << 16 ) ( x << 8 )| x )
77 # error "With 32bit bus only 1,2 or 4 chip(s) are allowed"
81 # error "Flash bus width might be 1,2,4 for 8,16,32 bit configuration"
85 flash_info_t flash_info
[CFG_MAX_FLASH_BANKS
];
87 static FLASH_BUS_RET
flash_status_reg (void)
90 FLASH_BUS
*addr
= (FLASH_BUS
*) 0;
92 *addr
= FLASH_CMD (CFI_INTEL_CMD_READ_STATUS_REGISTER
);
97 static int flash_ready (ulong timeout
)
101 reset_timer_masked ();
102 while ((flash_status_reg () & FLASH_CMD (CFI_INTEL_SR_READY
)) !=
103 FLASH_CMD (CFI_INTEL_SR_READY
)) {
104 if (get_timer_masked () > timeout
&& timeout
!= 0) {
112 #if ( CFG_MAX_FLASH_BANKS != 1 )
113 # error "SCB9328 platform has only one flash bank!"
117 ulong
flash_init (void)
120 unsigned long address
= SCB9328_FLASH_BASE
;
122 flash_info
[0].size
= SCB9328_FLASH_BANK_SIZE
;
123 flash_info
[0].sector_count
= CFG_MAX_FLASH_SECT
;
124 flash_info
[0].flash_id
= INTEL_MANUFACT
;
125 memset (flash_info
[0].protect
, 0, CFG_MAX_FLASH_SECT
);
127 for (i
= 0; i
< CFG_MAX_FLASH_SECT
; i
++) {
128 flash_info
[0].start
[i
] = address
;
129 #ifdef SCB9328_FLASH_UNLOCK
130 /* Some devices are hw locked after start. */
131 *((FLASH_BUS
*) address
) = FLASH_CMD (CFI_INTEL_CMD_LOCK_SETUP
);
132 *((FLASH_BUS
*) address
) = FLASH_CMD (CFI_INTEL_CMD_UNLOCK_BLOCK
);
134 *((FLASH_BUS
*) address
) = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY
);
136 address
+= SCB9328_FLASH_SECT_SIZE
;
139 flash_protect (FLAG_PROTECT_SET
,
141 CFG_FLASH_BASE
+ monitor_flash_len
- 1,
144 flash_protect (FLAG_PROTECT_SET
,
146 CFG_ENV_ADDR
+ CFG_ENV_SIZE
- 1, &flash_info
[0]);
148 return SCB9328_FLASH_BANK_SIZE
;
151 void flash_print_info (flash_info_t
* info
)
155 printf (" Intel vendor\n");
156 printf (" Size: %ld MB in %d Sectors\n",
157 info
->size
>> 20, info
->sector_count
);
159 printf (" Sector Start Addresses:");
160 for (i
= 0; i
< info
->sector_count
; i
++) {
165 printf (" %08lX%s", info
->start
[i
],
166 info
->protect
[i
] ? " (RO)" : " ");
172 int flash_erase (flash_info_t
* info
, int s_first
, int s_last
)
174 int flag
, non_protected
= 0, sector
;
179 for (sector
= s_first
; sector
<= s_last
; sector
++) {
180 if (!info
->protect
[sector
]) {
185 if (!non_protected
) {
186 return ERR_PROTECTED
;
190 * Disable interrupts which might cause a timeout
191 * here. Remember that our exception vectors are
192 * at address 0 in the flash, and we don't want a
193 * (ticker) exception to happen while the flash
194 * chip is in programming mode.
196 flag
= disable_interrupts ();
199 /* Start erase on unprotected sectors */
200 for (sector
= s_first
; sector
<= s_last
&& !ctrlc (); sector
++) {
201 if (info
->protect
[sector
]) {
202 printf ("Protected sector %2d skipping...\n", sector
);
205 printf ("Erasing sector %2d ... ", sector
);
208 address
= (FLASH_BUS
*) (info
->start
[sector
]);
210 *address
= FLASH_CMD (CFI_INTEL_CMD_BLOCK_ERASE
);
211 *address
= FLASH_CMD (CFI_INTEL_CMD_CONFIRM
);
212 if (flash_ready (CFG_FLASH_ERASE_TOUT
)) {
213 *address
= FLASH_CMD (CFI_INTEL_CMD_CLEAR_STATUS_REGISTER
);
216 *address
= FLASH_CMD (CFI_INTEL_CMD_SUSPEND
);
218 printf ("timeout! Aborting...\n");
221 *address
= FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY
);
224 printf ("User Interrupt!\n");
226 /* allow flash to settle - wait 10 ms */
227 udelay_masked (10000);
229 enable_interrupts ();
235 static int write_data (flash_info_t
* info
, ulong dest
, FLASH_BUS data
)
237 FLASH_BUS
*address
= (FLASH_BUS
*) dest
;
241 /* Check if Flash is (sufficiently) erased */
242 if ((*address
& data
) != data
) {
243 return ERR_NOT_ERASED
;
247 * Disable interrupts which might cause a timeout
248 * here. Remember that our exception vectors are
249 * at address 0 in the flash, and we don't want a
250 * (ticker) exception to happen while the flash
251 * chip is in programming mode.
254 flag
= disable_interrupts ();
256 *address
= FLASH_CMD (CFI_INTEL_CMD_CLEAR_STATUS_REGISTER
);
257 *address
= FLASH_CMD (CFI_INTEL_CMD_PROGRAM1
);
260 if (!flash_ready (CFG_FLASH_WRITE_TOUT
)) {
261 *address
= FLASH_CMD (CFI_INTEL_CMD_SUSPEND
);
263 printf ("timeout! Aborting...\n");
266 *address
= FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY
);
268 enable_interrupts ();
274 int write_buff (flash_info_t
* info
, uchar
* src
, ulong addr
, ulong cnt
)
276 ulong read_addr
, write_addr
;
278 int i
, result
= ERR_OK
;
281 read_addr
= addr
& ~(sizeof (FLASH_BUS
) - 1);
282 write_addr
= read_addr
;
283 if (read_addr
!= addr
) {
285 for (i
= 0; i
< sizeof (FLASH_BUS
); i
++) {
286 if (read_addr
< addr
|| cnt
== 0) {
287 data
|= *((uchar
*) read_addr
) << i
* 8;
289 data
|= (*src
++) << i
* 8;
294 if ((result
= write_data (info
, write_addr
, data
)) != ERR_OK
) {
297 write_addr
+= sizeof (FLASH_BUS
);
299 for (; cnt
>= sizeof (FLASH_BUS
); cnt
-= sizeof (FLASH_BUS
)) {
300 if ((result
= write_data (info
, write_addr
,
301 *((FLASH_BUS
*) src
))) != ERR_OK
) {
304 write_addr
+= sizeof (FLASH_BUS
);
305 src
+= sizeof (FLASH_BUS
);
308 read_addr
= write_addr
;
310 for (i
= 0; i
< sizeof (FLASH_BUS
); i
++) {
312 data
|= (*src
++) << i
* 8;
315 data
|= *((uchar
*) read_addr
) << i
* 8;
319 if ((result
= write_data (info
, write_addr
, data
)) != 0) {