board/sunxi/Kconfig

   1 if ARCH_SUNXI
   2
   3 choice
   4         prompt "Sunxi SoC Variant"
   5
   6 config MACH_SUN4I
   7         bool "sun4i (Allwinner A10)"
   8         select CPU_V7
   9         select SUPPORT_SPL
  10
  11 config MACH_SUN5I
  12         bool "sun5i (Allwinner A13)"
  13         select CPU_V7
  14         select SUPPORT_SPL
  15
  16 config MACH_SUN6I
  17         bool "sun6i (Allwinner A31)"
  18         select CPU_V7
  19         select SUPPORT_SPL
  20
  21 config MACH_SUN7I
  22         bool "sun7i (Allwinner A20)"
  23         select CPU_V7
  24         select CPU_V7_HAS_NONSEC
  25         select CPU_V7_HAS_VIRT
  26         select SUPPORT_SPL
  27         select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
  28
  29 config MACH_SUN8I
  30         bool "sun8i (Allwinner A23)"
  31         select CPU_V7
  32         select SUPPORT_SPL
  33
  34 endchoice
  35
  36 if MACH_SUN6I || MACH_SUN8I
  37
  38 config DRAM_CLK
  39         int "sun6i dram clock speed"
  40         default 312
  41         ---help---
  42         Set the dram clock speed, valid range 240 - 480, must be a multiple
  43         of 24.
  44
  45 config DRAM_ZQ
  46         int "sun6i dram zq value"
  47         default 123
  48         ---help---
  49         Set the dram zq value.
  50
  51 endif
  52
  53 config SYS_CONFIG_NAME
  54         default "sun4i" if MACH_SUN4I
  55         default "sun5i" if MACH_SUN5I
  56         default "sun6i" if MACH_SUN6I
  57         default "sun7i" if MACH_SUN7I
  58         default "sun8i" if MACH_SUN8I
  59
  60 choice
  61         prompt "Board"
  62
  63 config TARGET_A10_OLINUXINO_L
  64         bool "A10_OLINUXINO_L"
  65         depends on MACH_SUN4I
  66
  67 config TARGET_A10S_OLINUXINO_M
  68         bool "A10S_OLINUXINO_M"
  69         depends on MACH_SUN5I
  70
  71 config TARGET_A13_OLINUXINOM
  72         bool "A13_OLINUXINOM"
  73         depends on MACH_SUN5I
  74
  75 config TARGET_A13_OLINUXINO
  76         bool "A13_OLINUXINO"
  77         depends on MACH_SUN5I
  78
  79 config TARGET_A20_OLINUXINO_L2
  80         bool "A20_OLINUXINO_L2"
  81         depends on MACH_SUN7I
  82
  83 config TARGET_A20_OLINUXINO_L
  84         bool "A20_OLINUXINO_L"
  85         depends on MACH_SUN7I
  86
  87 config TARGET_A20_OLINUXINO_M
  88         bool "A20_OLINUXINO_M"
  89         depends on MACH_SUN7I
  90
  91 config TARGET_AUXTEK_T004
  92         bool "AUXTEK_T004"
  93         depends on MACH_SUN5I
  94
  95 config TARGET_BANANAPI
  96         bool "BANANAPI"
  97         depends on MACH_SUN7I
  98
  99 config TARGET_COLOMBUS
 100         bool "COLOMBUS"
 101         depends on MACH_SUN6I
 102
 103 config TARGET_CUBIEBOARD2
 104         bool "CUBIEBOARD2"
 105         depends on MACH_SUN7I
 106
 107 config TARGET_CUBIEBOARD
 108         bool "CUBIEBOARD"
 109         depends on MACH_SUN4I
 110
 111 config TARGET_CUBIETRUCK
 112         bool "CUBIETRUCK"
 113         depends on MACH_SUN7I
 114
 115 config TARGET_HUMMINGBIRD_A31
 116         bool "HUMMINGBIRD_A31"
 117         depends on MACH_SUN6I
 118
 119 config TARGET_IPPO_Q8H_V5
 120         bool "IPPO_Q8H_V5"
 121         depends on MACH_SUN8I
 122
 123 config TARGET_PCDUINO3
 124         bool "PCDUINO3"
 125         depends on MACH_SUN7I
 126
 127 config TARGET_MELE_A1000G
 128         bool "MELE_A1000G"
 129         depends on MACH_SUN4I
 130
 131 config TARGET_MELE_A1000
 132         bool "MELE_A1000"
 133         depends on MACH_SUN4I
 134
 135 config TARGET_MELE_M3
 136         bool "MELE_M3"
 137         depends on MACH_SUN7I
 138
 139 config TARGET_MELE_M9
 140         bool "MELE_M9"
 141         depends on MACH_SUN6I
 142
 143 config TARGET_MINI_X_1GB
 144         bool "MINI_X_1GB"
 145         depends on MACH_SUN4I
 146
 147 config TARGET_MINI_X
 148         bool "MINI_X"
 149         depends on MACH_SUN4I
 150
 151 config TARGET_MSI_PRIMO73
 152         bool "MSI Primo73 (7\" tablet)"
 153         depends on MACH_SUN7I
 154         ---help---
 155         The MSI Primo73 is an A20 based tablet, with 1G RAM, 16G NAND,
 156         1024x600 TN LCD display, mono speaker, 0.3 MP front camera, 2.0 MP
 157         rear camera, 3000 mAh battery, gt911 touchscreen, mma8452 accelerometer
 158         and rtl8188etv usb wifi. Has "power", "volume+" and "volume-" buttons
 159         (both volume buttons are also connected to the UBOOT_SEL pin). The
 160         external connectors are represented by MicroSD slot, MiniHDMI, MicroUSB
 161         OTG and 3.5mm headphone jack. More details are available at
 162             http://linux-sunxi.org/MSI_Primo73
 163
 164 config TARGET_MSI_PRIMO81
 165         bool "MSI Primo81 (7.85\" tablet)"
 166         depends on MACH_SUN6I
 167         ---help---
 168         The MSI Primo81 is an A31s based tablet, with 1G RAM, 16G NAND,
 169         1024x768 IPS LCD display, mono speaker, 0.3 MP front camera, 2.0 MP
 170         rear camera, 3500 mAh battery, gt911 touchscreen, mma8452 accelerometer
 171         and rtl8188etv usb wifi. Has "power", "volume+" and "volume-" buttons
 172         (both volume buttons are also connected to the UBOOT_SEL pin). The
 173         external connectors are represented by MicroSD slot, MiniHDMI, MicroUSB
 174         OTG and 3.5mm headphone jack. More details are available at
 175             http://linux-sunxi.org/MSI_Primo81
 176
 177 config TARGET_BA10_TV_BOX
 178         bool "BA10_TV_BOX"
 179         depends on MACH_SUN4I
 180
 181 config TARGET_I12_TVBOX
 182         bool "I12_TVBOX"
 183         depends on MACH_SUN7I
 184
 185 config TARGET_QT840A
 186         bool "QT840A"
 187         depends on MACH_SUN7I
 188
 189 config TARGET_R7DONGLE
 190         bool "R7DONGLE"
 191         depends on MACH_SUN5I
 192
 193 endchoice
 194
 195 config SYS_BOARD
 196         default "sunxi"
 197
 198 config SYS_SOC
 199         default "sunxi"
 200
 201 config SPL_FEL
 202         bool "SPL/FEL mode support"
 203         depends on SPL
 204         default n
 205
 206 config UART0_PORT_F
 207         bool "UART0 on MicroSD breakout board"
 208         depends on SPL_FEL
 209         default n
 210         ---help---
 211         Repurpose the SD card slot for getting access to the UART0 serial
 212         console. Primarily useful only for low level u-boot debugging on
 213         tablets, where normal UART0 is difficult to access and requires
 214         device disassembly and/or soldering. As the SD card can't be used
 215         at the same time, the system can be only booted in the FEL mode.
 216         Only enable this if you really know what you are doing.
 217
 218 config FDTFILE
 219         string "Default fdtfile env setting for this board"
 220
 221 config OLD_SUNXI_KERNEL_COMPAT
 222         boolean "Enable workarounds for booting old kernels"
 223         default n
 224         ---help---
 225         Set this to enable various workarounds for old kernels, this results in
 226         sub-optimal settings for newer kernels, only enable if needed.
 227
 228 config MMC0_CD_PIN
 229         string "Card detect pin for mmc0"
 230         default ""
 231         ---help---
 232         Set the card detect pin for mmc0, leave empty to not use cd. This
 233         takes a string in the format understood by sunxi_name_to_gpio, e.g.
 234         PH1 for pin 1 of port H.
 235
 236 config MMC1_CD_PIN
 237         string "Card detect pin for mmc1"
 238         default ""
 239         ---help---
 240         See MMC0_CD_PIN help text.
 241
 242 config MMC2_CD_PIN
 243         string "Card detect pin for mmc2"
 244         default ""
 245         ---help---
 246         See MMC0_CD_PIN help text.
 247
 248 config MMC3_CD_PIN
 249         string "Card detect pin for mmc3"
 250         default ""
 251         ---help---
 252         See MMC0_CD_PIN help text.
 253
 254 config MMC_SUNXI_SLOT_EXTRA
 255         int "mmc extra slot number"
 256         default -1
 257         ---help---
 258         sunxi builds always enable mmc0, some boards also have a second sdcard
 259         slot or emmc on mmc1 - mmc3. Setting this to 1, 2 or 3 will enable
 260         support for this.
 261
 262 config USB1_VBUS_PIN
 263         string "Vbus enable pin for usb1 (ehci0)"
 264         default "PH6" if MACH_SUN4I || MACH_SUN7I
 265         default "PH27" if MACH_SUN6I
 266         ---help---
 267         Set the Vbus enable pin for usb1 (ehci0, usb0 is the otg). This takes
 268         a string in the format understood by sunxi_name_to_gpio, e.g.
 269         PH1 for pin 1 of port H.
 270
 271 config USB2_VBUS_PIN
 272         string "Vbus enable pin for usb2 (ehci1)"
 273         default "PH3" if MACH_SUN4I || MACH_SUN7I
 274         default "PH24" if MACH_SUN6I
 275         ---help---
 276         See USB1_VBUS_PIN help text.
 277
 278 config VIDEO
 279         boolean "Enable graphical uboot console on HDMI"
 280         default y
 281         ---help---
 282         Say Y here to add support for using a cfb console on the HDMI output
 283         found on most sunxi devices.
 284
 285 config USB_KEYBOARD
 286         boolean "Enable USB keyboard support"
 287         default y
 288         ---help---
 289         Say Y here to add support for using a USB keyboard (typically used
 290         in combination with a graphical console on HDMI).
 291
 292 endif