board/sunxi/Kconfig

   1 if ARCH_SUNXI
   2
   3 choice
   4         prompt "Sunxi SoC Variant"
   5
   6 config MACH_SUN4I
   7         bool "sun4i (Allwinner A10)"
   8         select CPU_V7
   9         select SUPPORT_SPL
  10
  11 config MACH_SUN5I
  12         bool "sun5i (Allwinner A13)"
  13         select CPU_V7
  14         select SUPPORT_SPL
  15
  16 config MACH_SUN6I
  17         bool "sun6i (Allwinner A31)"
  18         select CPU_V7
  19         select SUPPORT_SPL
  20
  21 config MACH_SUN7I
  22         bool "sun7i (Allwinner A20)"
  23         select CPU_V7
  24         select CPU_V7_HAS_NONSEC
  25         select CPU_V7_HAS_VIRT
  26         select SUPPORT_SPL
  27         select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
  28
  29 config MACH_SUN8I
  30         bool "sun8i (Allwinner A23)"
  31         select CPU_V7
  32
  33 endchoice
  34
  35 config SYS_CONFIG_NAME
  36         string
  37         default "sun4i" if MACH_SUN4I
  38         default "sun5i" if MACH_SUN5I
  39         default "sun6i" if MACH_SUN6I
  40         default "sun7i" if MACH_SUN7I
  41         default "sun8i" if MACH_SUN8I
  42
  43 choice
  44         prompt "Board"
  45
  46 config TARGET_A10_OLINUXINO_L
  47         bool "A10_OLINUXINO_L"
  48         depends on MACH_SUN4I
  49
  50 config TARGET_A10S_OLINUXINO_M
  51         bool "A10S_OLINUXINO_M"
  52         depends on MACH_SUN5I
  53
  54 config TARGET_A13_OLINUXINOM
  55         bool "A13_OLINUXINOM"
  56         depends on MACH_SUN5I
  57
  58 config TARGET_A13_OLINUXINO
  59         bool "A13_OLINUXINO"
  60         depends on MACH_SUN5I
  61
  62 config TARGET_A20_OLINUXINO_L2
  63         bool "A20_OLINUXINO_L2"
  64         depends on MACH_SUN7I
  65
  66 config TARGET_A20_OLINUXINO_L
  67         bool "A20_OLINUXINO_L"
  68         depends on MACH_SUN7I
  69
  70 config TARGET_A20_OLINUXINO_M
  71         bool "A20_OLINUXINO_M"
  72         depends on MACH_SUN7I
  73
  74 config TARGET_AUXTEK_T004
  75         bool "AUXTEK_T004"
  76         depends on MACH_SUN5I
  77
  78 config TARGET_BANANAPI
  79         bool "BANANAPI"
  80         depends on MACH_SUN7I
  81
  82 config TARGET_COLOMBUS
  83         bool "COLOMBUS"
  84         depends on MACH_SUN6I
  85
  86 config TARGET_CUBIEBOARD2
  87         bool "CUBIEBOARD2"
  88         depends on MACH_SUN7I
  89
  90 config TARGET_CUBIEBOARD
  91         bool "CUBIEBOARD"
  92         depends on MACH_SUN4I
  93
  94 config TARGET_CUBIETRUCK
  95         bool "CUBIETRUCK"
  96         depends on MACH_SUN7I
  97
  98 config TARGET_IPPO_Q8H_V5
  99         bool "IPPO_Q8H_V5"
 100         depends on MACH_SUN8I
 101
 102 config TARGET_PCDUINO3
 103         bool "PCDUINO3"
 104         depends on MACH_SUN7I
 105
 106 config TARGET_MELE_A1000G
 107         bool "MELE_A1000G"
 108         depends on MACH_SUN4I
 109
 110 config TARGET_MELE_A1000
 111         bool "MELE_A1000"
 112         depends on MACH_SUN4I
 113
 114 config TARGET_MELE_M3
 115         bool "MELE_M3"
 116         depends on MACH_SUN7I
 117
 118 config TARGET_MELE_M9
 119         bool "MELE_M9"
 120         depends on MACH_SUN6I
 121
 122 config TARGET_MINI_X_1GB
 123         bool "MINI_X_1GB"
 124         depends on MACH_SUN4I
 125
 126 config TARGET_MINI_X
 127         bool "MINI_X"
 128         depends on MACH_SUN4I
 129
 130 config TARGET_BA10_TV_BOX
 131         bool "BA10_TV_BOX"
 132         depends on MACH_SUN4I
 133
 134 config TARGET_I12_TVBOX
 135         bool "I12_TVBOX"
 136         depends on MACH_SUN7I
 137
 138 config TARGET_QT840A
 139         bool "QT840A"
 140         depends on MACH_SUN7I
 141
 142 config TARGET_R7DONGLE
 143         bool "R7DONGLE"
 144         depends on MACH_SUN5I
 145
 146 endchoice
 147
 148 config SYS_BOARD
 149         default "sunxi"
 150
 151 config SYS_SOC
 152         default "sunxi"
 153
 154 config SPL_FEL
 155         bool "SPL/FEL mode support"
 156         depends on SPL
 157         default n
 158
 159 config FDTFILE
 160         string "Default fdtfile env setting for this board"
 161
 162 config OLD_SUNXI_KERNEL_COMPAT
 163         boolean "Enable workarounds for booting old kernels"
 164         default n
 165         ---help---
 166         Set this to enable various workarounds for old kernels, this results in
 167         sub-optimal settings for newer kernels, only enable if needed.
 168
 169 config MMC0_CD_PIN
 170         string "Card detect pin for mmc0"
 171         default ""
 172         ---help---
 173         Set the card detect pin for mmc0, leave empty to not use cd. This
 174         takes a string in the format understood by sunxi_name_to_gpio, e.g.
 175         PH1 for pin 1 of port H.
 176
 177 config MMC1_CD_PIN
 178         string "Card detect pin for mmc1"
 179         default ""
 180         ---help---
 181         See MMC0_CD_PIN help text.
 182
 183 config MMC2_CD_PIN
 184         string "Card detect pin for mmc2"
 185         default ""
 186         ---help---
 187         See MMC0_CD_PIN help text.
 188
 189 config MMC3_CD_PIN
 190         string "Card detect pin for mmc3"
 191         default ""
 192         ---help---
 193         See MMC0_CD_PIN help text.
 194
 195 config MMC_SUNXI_SLOT_EXTRA
 196         int "mmc extra slot number"
 197         default -1
 198         ---help---
 199         sunxi builds always enable mmc0, some boards also have a second sdcard
 200         slot or emmc on mmc1 - mmc3. Setting this to 1, 2 or 3 will enable
 201         support for this.
 202
 203 config USB1_VBUS_PIN
 204         string "Vbus enable pin for usb1 (ehci0)"
 205         default "PH6" if MACH_SUN4I || MACH_SUN7I
 206         default "PH27" if MACH_SUN6I
 207         ---help---
 208         Set the Vbus enable pin for usb1 (ehci0, usb0 is the otg). This takes
 209         a string in the format understood by sunxi_name_to_gpio, e.g.
 210         PH1 for pin 1 of port H.
 211
 212 config USB2_VBUS_PIN
 213         string "Vbus enable pin for usb2 (ehci1)"
 214         default "PH3" if MACH_SUN4I || MACH_SUN7I
 215         default "PH24" if MACH_SUN6I
 216         ---help---
 217         See USB1_VBUS_PIN help text.
 218
 219 config VIDEO
 220         boolean "Enable graphical uboot console on HDMI"
 221         default y
 222         ---help---
 223         Say Y here to add support for using a cfb console on the HDMI output
 224         found on most sunxi devices.
 225
 226 config USB_KEYBOARD
 227         boolean "Enable USB keyboard support"
 228         default y
 229         ---help---
 230         Say Y here to add support for using a USB keyboard (typically used
 231         in combination with a graphical console on HDMI).
 232
 233 endif