]> git.ipfire.org Git - people/ms/u-boot.git/blob - board/ti/am335x/board.h
am33xx: Enable UART{1,2,3,4,5} pin-mux
[people/ms/u-boot.git] / board / ti / am335x / board.h
1 /*
2 * board.h
3 *
4 * TI AM335x boards information header
5 *
6 * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
16 * GNU General Public License for more details.
17 */
18
19 #ifndef _BOARD_H_
20 #define _BOARD_H_
21
22 /*
23 * TI AM335x parts define a system EEPROM that defines certain sub-fields.
24 * We use these fields to in turn see what board we are on, and what
25 * that might require us to set or not set.
26 */
27 #define HDR_NO_OF_MAC_ADDR 3
28 #define HDR_ETH_ALEN 6
29 #define HDR_NAME_LEN 8
30
31 struct am335x_baseboard_id {
32 unsigned int magic;
33 char name[HDR_NAME_LEN];
34 char version[4];
35 char serial[12];
36 char config[32];
37 char mac_addr[HDR_NO_OF_MAC_ADDR][HDR_ETH_ALEN];
38 };
39
40 /*
41 * We have three pin mux functions that must exist. We must be able to enable
42 * uart0, for initial output and i2c0 to read the main EEPROM. We then have a
43 * main pinmux function that can be overridden to enable all other pinmux that
44 * is required on the board.
45 */
46 void enable_uart0_pin_mux(void);
47 void enable_uart1_pin_mux(void);
48 void enable_uart2_pin_mux(void);
49 void enable_uart3_pin_mux(void);
50 void enable_uart4_pin_mux(void);
51 void enable_uart5_pin_mux(void);
52 void enable_i2c0_pin_mux(void);
53 void enable_board_pin_mux(struct am335x_baseboard_id *header);
54 #endif