]>
git.ipfire.org Git - people/ms/u-boot.git/blob - board/trab/trab.c
3 * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
5 * See file CREDITS for list of people who contributed to this
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
31 /* ------------------------------------------------------------------------- */
34 static void spi_init(void);
35 static void wait_transmit_done(void);
36 static void tsc2000_write(unsigned int page
, unsigned int reg
,
38 static void tsc2000_set_brightness(void);
40 #ifdef CONFIG_MODEM_SUPPORT
41 static int key_pressed(void);
42 extern void disable_putc(void);
43 extern int do_mdm_init
; /* defined in common/main.c */
46 * We need a delay of at least 500 us after turning on the VFD clock
47 * before we can read any useful information for the CPLD controlling
48 * the keyboard switches. Let's play safe and wait 5 ms. The problem
49 * is that timers are not available yet, so we use a manually timed
52 #define KBD_MDELAY 5000
53 static void udelay_no_timer (int usec
)
55 DECLARE_GLOBAL_DATA_PTR
;
60 for (i
= 0; i
< delay
; i
++) gd
->bd
->bi_arch_number
= 145;
62 #endif /* CONFIG_MODEM_SUPPORT */
65 * Miscellaneous platform dependent initialisations
70 #if defined(CONFIG_VFD)
71 extern int vfd_init_clocks(void);
73 DECLARE_GLOBAL_DATA_PTR
;
74 S3C24X0_CLOCK_POWER
* const clk_power
= S3C24X0_GetBase_CLOCK_POWER();
75 S3C24X0_GPIO
* const gpio
= S3C24X0_GetBase_GPIO();
77 /* memory and cpu-speed are setup before relocation */
78 #ifdef CONFIG_TRAB_50MHZ
79 /* change the clock to be 50 MHz 1:1:1 */
80 /* MDIV:0x5c PDIV:4 SDIV:2 */
81 clk_power
->MPLLCON
= 0x5c042;
82 clk_power
->CLKDIVN
= 0;
84 /* change the clock to be 133 MHz 1:2:4 */
85 /* MDIV:0x7d PDIV:4 SDIV:1 */
86 clk_power
->MPLLCON
= 0x7d041;
87 clk_power
->CLKDIVN
= 3;
90 /* set up the I/O ports */
91 gpio
->PACON
= 0x3ffff;
92 gpio
->PBCON
= 0xaaaaaaaa;
94 /* INPUT nCTS0 nRTS0 TXD[1] TXD[0] RXD[1] RXD[0] */
95 /* 00, 10, 10, 10, 10, 10, 10 */
96 gpio
->PFCON
= (2<<0) | (2<<2) | (2<<4) | (2<<6) | (2<<8) | (2<<10);
98 /* do not pull up RXD0, RXD1, TXD0, TXD1, CTS0, RTS0 */
99 gpio
->PFUP
= (1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<4) | (1<<5);
101 /* do not pull up RXD0, RXD1, TXD0, TXD1 */
102 gpio
->PFUP
= (1<<0) | (1<<1) | (1<<2) | (1<<3);
108 /* arch number of SAMSUNG-Board */
109 /* MACH_TYPE_SMDK2400 */
110 /* XXX this isn't really correct, but keep it for now */
111 gd
->bd
->bi_arch_number
= 145;
113 /* adress of boot parameters */
114 gd
->bd
->bi_boot_params
= 0x0c000100;
116 /* Make sure both buzzers are turned off */
117 gpio
->PDCON
|= 0x5400;
118 gpio
->PDDAT
&= ~0xE0;
122 #endif /* CONFIG_VFD */
124 #ifdef CONFIG_MODEM_SUPPORT
125 udelay_no_timer (KBD_MDELAY
);
128 disable_putc(); /* modem doesn't understand banner etc */
131 #endif /* CONFIG_MODEM_SUPPORT */
138 DECLARE_GLOBAL_DATA_PTR
;
140 gd
->bd
->bi_dram
[0].start
= PHYS_SDRAM_1
;
141 gd
->bd
->bi_dram
[0].size
= PHYS_SDRAM_1_SIZE
;
145 /*-----------------------------------------------------------------------
146 * Keyboard Controller
149 /* Maximum key number */
150 #define KEYBD_KEY_NUM 4
152 #define KBD_DATA (((*(volatile ulong *)0x04020000) >> 16) & 0xF)
154 static uchar
*key_match (ulong
);
156 int misc_init_r (void)
158 ulong kbd_data
= KBD_DATA
;
159 uchar keybd_env
[KEYBD_KEY_NUM
+ 1];
163 for (i
= 0; i
< KEYBD_KEY_NUM
; ++i
) {
164 keybd_env
[i
] = '0' + ((kbd_data
>> i
) & 1);
167 debug ("** Setting keybd=\"%s\"\n", keybd_env
);
168 setenv ("keybd", keybd_env
);
170 str
= strdup (key_match (kbd_data
)); /* decode keys */
172 #ifdef CONFIG_PREBOOT /* automatically configure "preboot" command on key match */
173 debug ("** Setting preboot=\"%s\"\n", str
);
174 setenv ("preboot", str
); /* set or delete definition */
175 #endif /* CONFIG_PREBOOT */
180 #ifdef CFG_BRIGHTNESS
181 tsc2000_set_brightness();
186 #ifdef CONFIG_PREBOOT
188 static uchar kbd_magic_prefix
[] = "key_magic";
189 static uchar kbd_command_prefix
[] = "key_cmd";
191 static int compare_magic (ulong kbd_data
, uchar
*str
)
195 debug ("compare_magic: kbd: %04lx str: \"%s\"\n",kbd_data
,str
);
198 uchar c
= *str
- '1';
200 if (c
>= KEYBD_KEY_NUM
) /* bad key number */
205 if (!(kbd_data
& key_mask
)) { /* key not pressed */
206 debug ( "compare_magic: "
207 "kbd: %04lx mask: %04lx - key not pressed\n",
208 kbd_data
, key_mask
);
212 kbd_data
&= ~key_mask
;
215 if (kbd_data
) { /* key(s) not released */
216 debug ( "compare_magic: "
217 "kbd: %04lx - key(s) not released\n", kbd_data
);
224 /*-----------------------------------------------------------------------
225 * Check if pressed key(s) match magic sequence,
226 * and return the command string associated with that key(s).
228 * If no key press was decoded, NULL is returned.
230 * Note: the first character of the argument will be overwritten with
231 * the "magic charcter code" of the decoded key(s), or '\0'.
234 * Note: the string points to static environment data and must be
235 * saved before you call any function that modifies the environment.
237 static uchar
*key_match (ulong kbd_data
)
239 uchar magic
[sizeof (kbd_magic_prefix
) + 1];
240 uchar cmd_name
[sizeof (kbd_command_prefix
) + 1];
242 uchar
*kbd_magic_keys
;
245 * The following string defines the characters that can pe appended
246 * to "key_magic" to form the names of environment variables that
247 * hold "magic" key codes, i. e. such key codes that can cause
248 * pre-boot actions. If the string is empty (""), then only
249 * "key_magic" is checked (old behaviour); the string "125" causes
250 * checks for "key_magic1", "key_magic2" and "key_magic5", etc.
252 if ((kbd_magic_keys
= getenv ("magic_keys")) == NULL
)
255 debug ("key_match: magic_keys=\"%s\"\n", kbd_magic_keys
);
257 /* loop over all magic keys;
258 * use '\0' suffix in case of empty string
260 for (suffix
=kbd_magic_keys
; *suffix
|| suffix
==kbd_magic_keys
; ++suffix
)
262 sprintf (magic
, "%s%c", kbd_magic_prefix
, *suffix
);
264 debug ("key_match: magic=\"%s\"\n",
265 getenv(magic
) ? getenv(magic
) : "<UNDEFINED>");
267 if (compare_magic(kbd_data
, getenv(magic
)) == 0)
269 sprintf (cmd_name
, "%s%c", kbd_command_prefix
, *suffix
);
270 debug ("key_match: cmdname %s=\"%s\"\n",
275 return (getenv (cmd_name
));
278 debug ("key_match: no match\n");
281 #endif /* CONFIG_PREBOOT */
283 /* Read Keyboard status */
284 int do_kbd (cmd_tbl_t
* cmdtp
, int flag
, int argc
, char *argv
[])
286 ulong kbd_data
= KBD_DATA
;
287 uchar keybd_env
[KEYBD_KEY_NUM
+ 1];
291 for (i
= 0; i
< KEYBD_KEY_NUM
; ++i
) {
292 keybd_env
[i
] = '0' + ((kbd_data
>> i
) & 1);
293 printf (" %c", keybd_env
[i
]);
297 setenv ("keybd", keybd_env
);
301 #ifdef CONFIG_MODEM_SUPPORT
302 static int key_pressed(void)
304 return (compare_magic(KBD_DATA
, CONFIG_MODEM_KEY_MAGIC
) == 0);
306 #endif /* CONFIG_MODEM_SUPPORT */
308 #ifdef CFG_BRIGHTNESS
310 static inline void SET_CS_TOUCH(void)
312 S3C24X0_GPIO
* const gpio
= S3C24X0_GetBase_GPIO();
314 gpio
->PDDAT
&= 0x5FF;
317 static inline void CLR_CS_TOUCH(void)
319 S3C24X0_GPIO
* const gpio
= S3C24X0_GetBase_GPIO();
321 gpio
->PDDAT
|= 0x200;
324 static void spi_init(void)
326 S3C24X0_GPIO
* const gpio
= S3C24X0_GetBase_GPIO();
327 S3C24X0_SPI
* const spi
= S3C24X0_GetBase_SPI();
330 /* Configure I/O ports. */
331 gpio
->PDCON
= (gpio
->PDCON
& 0xF3FFFF) | 0x040000;
332 gpio
->PGCON
= (gpio
->PGCON
& 0x0F3FFF) | 0x008000;
333 gpio
->PGCON
= (gpio
->PGCON
& 0x0CFFFF) | 0x020000;
334 gpio
->PGCON
= (gpio
->PGCON
& 0x03FFFF) | 0x080000;
338 spi
->ch
[0].SPPRE
= 0x1F; /* Baudrate ca. 514kHz */
339 spi
->ch
[0].SPPIN
= 0x01; /* SPI-MOSI holds Level after last bit */
340 spi
->ch
[0].SPCON
= 0x1A; /* Polling, Prescaler, Master, CPOL=0, CPHA=1 */
342 /* Dummy byte ensures clock to be low. */
343 for (i
= 0; i
< 10; i
++) {
344 spi
->ch
[0].SPTDAT
= 0xFF;
346 wait_transmit_done();
349 static void wait_transmit_done(void)
351 S3C24X0_SPI
* const spi
= S3C24X0_GetBase_SPI();
353 while (!(spi
->ch
[0].SPSTA
& 0x01)); /* wait until transfer is done */
356 static void tsc2000_write(unsigned int page
, unsigned int reg
,
359 S3C24X0_SPI
* const spi
= S3C24X0_GetBase_SPI();
360 unsigned int command
;
364 command
|= (page
<< 11);
365 command
|= (reg
<< 5);
367 spi
->ch
[0].SPTDAT
= (command
& 0xFF00) >> 8;
368 wait_transmit_done();
369 spi
->ch
[0].SPTDAT
= (command
& 0x00FF);
370 wait_transmit_done();
371 spi
->ch
[0].SPTDAT
= (data
& 0xFF00) >> 8;
372 wait_transmit_done();
373 spi
->ch
[0].SPTDAT
= (data
& 0x00FF);
374 wait_transmit_done();
379 static void tsc2000_set_brightness(void)
385 tsc2000_write(1, 2, 0x0); /* Power up DAC */
387 i
= getenv_r("brightness", tmp
, sizeof(tmp
));
389 ? (int) simple_strtoul (tmp
, NULL
, 10)
392 tsc2000_write(0, 0xb, br
& 0xff);