cmd/mdio.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * (C) Copyright 2011 Freescale Semiconductor, Inc
   4  * Andy Fleming
   5  */
   6
   7 /*
   8  * MDIO Commands
   9  */
  10
  11 #include <common.h>
  12 #include <command.h>
  13 #include <miiphy.h>
  14 #include <phy.h>
  15
  16 static char last_op[2];
  17 static uint last_data;
  18 static uint last_addr_lo;
  19 static uint last_addr_hi;
  20 static uint last_devad_lo;
  21 static uint last_devad_hi;
  22 static uint last_reg_lo;
  23 static uint last_reg_hi;
  24
  25 static int extract_range(char *input, int *plo, int *phi)
  26 {
  27         char *end;
  28         *plo = simple_strtol(input, &end, 16);
  29         if (end == input)
  30                 return -1;
  31
  32         if ((*end == '-') && *(++end))
  33                 *phi = simple_strtol(end, NULL, 16);
  34         else if (*end == '\0')
  35                 *phi = *plo;
  36         else
  37                 return -1;
  38
  39         return 0;
  40 }
  41
  42 static int mdio_write_ranges(struct mii_dev *bus,
  43                              int addrlo,
  44                              int addrhi, int devadlo, int devadhi,
  45                              int reglo, int reghi, unsigned short data,
  46                              int extended)
  47 {
  48         struct phy_device *phydev;
  49         int addr, devad, reg;
  50         int err = 0;
  51
  52         for (addr = addrlo; addr <= addrhi; addr++) {
  53                 phydev = bus->phymap[addr];
  54
  55                 for (devad = devadlo; devad <= devadhi; devad++) {
  56                         for (reg = reglo; reg <= reghi; reg++) {
  57                                 if (!phydev)
  58                                         err = bus->write(bus, addr, devad,
  59                                                          reg, data);
  60                                 else if (!extended)
  61                                         err = phy_write_mmd(phydev, devad,
  62                                                             reg, data);
  63                                 else
  64                                         err = phydev->drv->writeext(phydev,
  65                                                         addr, devad, reg, data);
  66
  67                                 if (err)
  68                                         goto err_out;
  69                         }
  70                 }
  71         }
  72
  73 err_out:
  74         return err;
  75 }
  76
  77 static int mdio_read_ranges(struct mii_dev *bus,
  78                             int addrlo,
  79                             int addrhi, int devadlo, int devadhi,
  80                             int reglo, int reghi, int extended)
  81 {
  82         int addr, devad, reg;
  83         struct phy_device *phydev;
  84
  85         printf("Reading from bus %s\n", bus->name);
  86         for (addr = addrlo; addr <= addrhi; addr++) {
  87                 phydev = bus->phymap[addr];
  88                 printf("PHY at address %x:\n", addr);
  89
  90                 for (devad = devadlo; devad <= devadhi; devad++) {
  91                         for (reg = reglo; reg <= reghi; reg++) {
  92                                 int val;
  93
  94                                 if (!phydev)
  95                                         val = bus->read(bus, addr, devad, reg);
  96                                 else if (!extended)
  97                                         val = phy_read_mmd(phydev, devad, reg);
  98                                 else
  99                                         val = phydev->drv->readext(phydev, addr,
 100                                                 devad, reg);
 101
 102                                 if (val < 0) {
 103                                         printf("Error\n");
 104
 105                                         return val;
 106                                 }
 107
 108                                 if (devad >= 0)
 109                                         printf("%d.", devad);
 110
 111                                 printf("%d - 0x%x\n", reg, val & 0xffff);
 112                         }
 113                 }
 114         }
 115
 116         return 0;
 117 }
 118
 119 /* The register will be in the form [a[-b].]x[-y] */
 120 static int extract_reg_range(char *input, int *devadlo, int *devadhi,
 121                              int *reglo, int *reghi)
 122 {
 123         char *regstr;
 124
 125         /* use strrchr to find the last string after a '.' */
 126         regstr = strrchr(input, '.');
 127
 128         /* If it exists, extract the devad(s) */
 129         if (regstr) {
 130                 char devadstr[32];
 131
 132                 strncpy(devadstr, input, regstr - input);
 133                 devadstr[regstr - input] = '\0';
 134
 135                 if (extract_range(devadstr, devadlo, devadhi))
 136                         return -1;
 137
 138                 regstr++;
 139         } else {
 140                 /* Otherwise, we have no devad, and we just got regs */
 141                 *devadlo = *devadhi = MDIO_DEVAD_NONE;
 142
 143                 regstr = input;
 144         }
 145
 146         return extract_range(regstr, reglo, reghi);
 147 }
 148
 149 static int extract_phy_range(char *const argv[], int argc, struct mii_dev **bus,
 150                              struct phy_device **phydev,
 151                              int *addrlo, int *addrhi)
 152 {
 153         struct phy_device *dev = *phydev;
 154
 155         if ((argc < 1) || (argc > 2))
 156                 return -1;
 157
 158         /* If there are two arguments, it's busname addr */
 159         if (argc == 2) {
 160                 *bus = miiphy_get_dev_by_name(argv[0]);
 161
 162                 if (!*bus)
 163                         return -1;
 164
 165                 return extract_range(argv[1], addrlo, addrhi);
 166         }
 167
 168         /* It must be one argument, here */
 169
 170         /*
 171          * This argument can be one of two things:
 172          * 1) Ethernet device name
 173          * 2) Just an address (use the previously-used bus)
 174          *
 175          * We check all buses for a PHY which is connected to an ethernet
 176          * device by the given name.  If none are found, we call
 177          * extract_range() on the string, and see if it's an address range.
 178          */
 179         dev = mdio_phydev_for_ethname(argv[0]);
 180
 181         if (dev) {
 182                 *addrlo = *addrhi = dev->addr;
 183                 *bus = dev->bus;
 184
 185                 return 0;
 186         }
 187
 188         /* It's an address or nothing useful */
 189         return extract_range(argv[0], addrlo, addrhi);
 190 }
 191
 192 /* ---------------------------------------------------------------- */
 193 static int do_mdio(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 194 {
 195         char op[2];
 196         int addrlo, addrhi, reglo, reghi, devadlo, devadhi;
 197         unsigned short  data;
 198         int pos = argc - 1;
 199         struct mii_dev *bus;
 200         struct phy_device *phydev = NULL;
 201         int extended = 0;
 202
 203         if (argc < 2)
 204                 return CMD_RET_USAGE;
 205
 206         /*
 207          * We use the last specified parameters, unless new ones are
 208          * entered.
 209          */
 210         op[0] = argv[1][0];
 211         addrlo = last_addr_lo;
 212         addrhi = last_addr_hi;
 213         devadlo = last_devad_lo;
 214         devadhi = last_devad_hi;
 215         reglo  = last_reg_lo;
 216         reghi  = last_reg_hi;
 217         data   = last_data;
 218
 219         bus = mdio_get_current_dev();
 220
 221         if (flag & CMD_FLAG_REPEAT)
 222                 op[0] = last_op[0];
 223
 224         if (strlen(argv[1]) > 1) {
 225                 op[1] = argv[1][1];
 226                 if (op[1] == 'x') {
 227                         phydev = mdio_phydev_for_ethname(argv[2]);
 228
 229                         if (phydev) {
 230                                 addrlo = phydev->addr;
 231                                 addrhi = addrlo;
 232                                 bus = phydev->bus;
 233                                 extended = 1;
 234                         } else {
 235                                 return CMD_RET_FAILURE;
 236                         }
 237
 238                         if (!phydev->drv ||
 239                             (!phydev->drv->writeext && (op[0] == 'w')) ||
 240                             (!phydev->drv->readext && (op[0] == 'r'))) {
 241                                 puts("PHY does not have extended functions\n");
 242                                 return CMD_RET_FAILURE;
 243                         }
 244                 }
 245         }
 246
 247         switch (op[0]) {
 248         case 'w':
 249                 if (pos > 1)
 250                         data = simple_strtoul(argv[pos--], NULL, 16);
 251         case 'r':
 252                 if (pos > 1)
 253                         if (extract_reg_range(argv[pos--], &devadlo, &devadhi,
 254                                               &reglo, &reghi))
 255                                 return CMD_RET_FAILURE;
 256
 257         default:
 258                 if (pos > 1)
 259                         if (extract_phy_range(&argv[2], pos - 1, &bus,
 260                                               &phydev, &addrlo, &addrhi))
 261                                 return CMD_RET_FAILURE;
 262
 263                 break;
 264         }
 265
 266         if (op[0] == 'l') {
 267                 mdio_list_devices();
 268
 269                 return 0;
 270         }
 271
 272         /* Save the chosen bus */
 273         miiphy_set_current_dev(bus->name);
 274
 275         switch (op[0]) {
 276         case 'w':
 277                 mdio_write_ranges(bus, addrlo, addrhi, devadlo, devadhi,
 278                                   reglo, reghi, data, extended);
 279                 break;
 280
 281         case 'r':
 282                 mdio_read_ranges(bus, addrlo, addrhi, devadlo, devadhi,
 283                                  reglo, reghi, extended);
 284                 break;
 285         }
 286
 287         /*
 288          * Save the parameters for repeats.
 289          */
 290         last_op[0] = op[0];
 291         last_addr_lo = addrlo;
 292         last_addr_hi = addrhi;
 293         last_devad_lo = devadlo;
 294         last_devad_hi = devadhi;
 295         last_reg_lo  = reglo;
 296         last_reg_hi  = reghi;
 297         last_data    = data;
 298
 299         return 0;
 300 }
 301
 302 /***************************************************/
 303
 304 U_BOOT_CMD(
 305         mdio,   6,      1,      do_mdio,
 306         "MDIO utility commands",
 307         "list                   - List MDIO buses\n"
 308         "mdio read <phydev> [<devad>.]<reg> - "
 309                 "read PHY's register at <devad>.<reg>\n"
 310         "mdio write <phydev> [<devad>.]<reg> <data> - "
 311                 "write PHY's register at <devad>.<reg>\n"
 312         "mdio rx <phydev> [<devad>.]<reg> - "
 313                 "read PHY's extended register at <devad>.<reg>\n"
 314         "mdio wx <phydev> [<devad>.]<reg> <data> - "
 315                 "write PHY's extended register at <devad>.<reg>\n"
 316         "<phydev> may be:\n"
 317         "   <busname>  <addr>\n"
 318         "   <addr>\n"
 319         "   <eth name>\n"
 320         "<addr> <devad>, and <reg> may be ranges, e.g. 1-5.4-0x1f.\n"
 321 );