]> git.ipfire.org Git - thirdparty/u-boot.git/blob - cmd/nvedit.c
gpio: Show inactive GPIOs when explicitly requested
[thirdparty/u-boot.git] / cmd / nvedit.c
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * (C) Copyright 2000-2013
4 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5 *
6 * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
7 * Andreas Heppel <aheppel@sysgo.de>
8 *
9 * Copyright 2011 Freescale Semiconductor, Inc.
10 */
11
12 /*
13 * Support for persistent environment data
14 *
15 * The "environment" is stored on external storage as a list of '\0'
16 * terminated "name=value" strings. The end of the list is marked by
17 * a double '\0'. The environment is preceded by a 32 bit CRC over
18 * the data part and, in case of redundant environment, a byte of
19 * flags.
20 *
21 * This linearized representation will also be used before
22 * relocation, i. e. as long as we don't have a full C runtime
23 * environment. After that, we use a hash table.
24 */
25
26 #include <common.h>
27 #include <cli.h>
28 #include <command.h>
29 #include <console.h>
30 #include <environment.h>
31 #include <search.h>
32 #include <errno.h>
33 #include <malloc.h>
34 #include <mapmem.h>
35 #include <watchdog.h>
36 #include <linux/stddef.h>
37 #include <asm/byteorder.h>
38 #include <asm/io.h>
39
40 DECLARE_GLOBAL_DATA_PTR;
41
42 #if !defined(CONFIG_ENV_IS_IN_EEPROM) && \
43 !defined(CONFIG_ENV_IS_IN_FLASH) && \
44 !defined(CONFIG_ENV_IS_IN_MMC) && \
45 !defined(CONFIG_ENV_IS_IN_FAT) && \
46 !defined(CONFIG_ENV_IS_IN_EXT4) && \
47 !defined(CONFIG_ENV_IS_IN_NAND) && \
48 !defined(CONFIG_ENV_IS_IN_NVRAM) && \
49 !defined(CONFIG_ENV_IS_IN_ONENAND) && \
50 !defined(CONFIG_ENV_IS_IN_SATA) && \
51 !defined(CONFIG_ENV_IS_IN_SPI_FLASH) && \
52 !defined(CONFIG_ENV_IS_IN_REMOTE) && \
53 !defined(CONFIG_ENV_IS_IN_UBI) && \
54 !defined(CONFIG_ENV_IS_NOWHERE)
55 # error Define one of CONFIG_ENV_IS_IN_{EEPROM|FLASH|MMC|FAT|EXT4|\
56 NAND|NVRAM|ONENAND|SATA|SPI_FLASH|REMOTE|UBI} or CONFIG_ENV_IS_NOWHERE
57 #endif
58
59 /*
60 * Maximum expected input data size for import command
61 */
62 #define MAX_ENV_SIZE (1 << 20) /* 1 MiB */
63
64 /*
65 * This variable is incremented on each do_env_set(), so it can
66 * be used via get_env_id() as an indication, if the environment
67 * has changed or not. So it is possible to reread an environment
68 * variable only if the environment was changed ... done so for
69 * example in NetInitLoop()
70 */
71 static int env_id = 1;
72
73 int get_env_id(void)
74 {
75 return env_id;
76 }
77
78 #ifndef CONFIG_SPL_BUILD
79 /*
80 * Command interface: print one or all environment variables
81 *
82 * Returns 0 in case of error, or length of printed string
83 */
84 static int env_print(char *name, int flag)
85 {
86 char *res = NULL;
87 ssize_t len;
88
89 if (name) { /* print a single name */
90 ENTRY e, *ep;
91
92 e.key = name;
93 e.data = NULL;
94 hsearch_r(e, FIND, &ep, &env_htab, flag);
95 if (ep == NULL)
96 return 0;
97 len = printf("%s=%s\n", ep->key, ep->data);
98 return len;
99 }
100
101 /* print whole list */
102 len = hexport_r(&env_htab, '\n', flag, &res, 0, 0, NULL);
103
104 if (len > 0) {
105 puts(res);
106 free(res);
107 return len;
108 }
109
110 /* should never happen */
111 printf("## Error: cannot export environment\n");
112 return 0;
113 }
114
115 static int do_env_print(cmd_tbl_t *cmdtp, int flag, int argc,
116 char * const argv[])
117 {
118 int i;
119 int rcode = 0;
120 int env_flag = H_HIDE_DOT;
121
122 if (argc > 1 && argv[1][0] == '-' && argv[1][1] == 'a') {
123 argc--;
124 argv++;
125 env_flag &= ~H_HIDE_DOT;
126 }
127
128 if (argc == 1) {
129 /* print all env vars */
130 rcode = env_print(NULL, env_flag);
131 if (!rcode)
132 return 1;
133 printf("\nEnvironment size: %d/%ld bytes\n",
134 rcode, (ulong)ENV_SIZE);
135 return 0;
136 }
137
138 /* print selected env vars */
139 env_flag &= ~H_HIDE_DOT;
140 for (i = 1; i < argc; ++i) {
141 int rc = env_print(argv[i], env_flag);
142 if (!rc) {
143 printf("## Error: \"%s\" not defined\n", argv[i]);
144 ++rcode;
145 }
146 }
147
148 return rcode;
149 }
150
151 #ifdef CONFIG_CMD_GREPENV
152 static int do_env_grep(cmd_tbl_t *cmdtp, int flag,
153 int argc, char * const argv[])
154 {
155 char *res = NULL;
156 int len, grep_how, grep_what;
157
158 if (argc < 2)
159 return CMD_RET_USAGE;
160
161 grep_how = H_MATCH_SUBSTR; /* default: substring search */
162 grep_what = H_MATCH_BOTH; /* default: grep names and values */
163
164 while (--argc > 0 && **++argv == '-') {
165 char *arg = *argv;
166 while (*++arg) {
167 switch (*arg) {
168 #ifdef CONFIG_REGEX
169 case 'e': /* use regex matching */
170 grep_how = H_MATCH_REGEX;
171 break;
172 #endif
173 case 'n': /* grep for name */
174 grep_what = H_MATCH_KEY;
175 break;
176 case 'v': /* grep for value */
177 grep_what = H_MATCH_DATA;
178 break;
179 case 'b': /* grep for both */
180 grep_what = H_MATCH_BOTH;
181 break;
182 case '-':
183 goto DONE;
184 default:
185 return CMD_RET_USAGE;
186 }
187 }
188 }
189
190 DONE:
191 len = hexport_r(&env_htab, '\n',
192 flag | grep_what | grep_how,
193 &res, 0, argc, argv);
194
195 if (len > 0) {
196 puts(res);
197 free(res);
198 }
199
200 if (len < 2)
201 return 1;
202
203 return 0;
204 }
205 #endif
206 #endif /* CONFIG_SPL_BUILD */
207
208 /*
209 * Set a new environment variable,
210 * or replace or delete an existing one.
211 */
212 static int _do_env_set(int flag, int argc, char * const argv[], int env_flag)
213 {
214 int i, len;
215 char *name, *value, *s;
216 ENTRY e, *ep;
217
218 debug("Initial value for argc=%d\n", argc);
219 while (argc > 1 && **(argv + 1) == '-') {
220 char *arg = *++argv;
221
222 --argc;
223 while (*++arg) {
224 switch (*arg) {
225 case 'f': /* force */
226 env_flag |= H_FORCE;
227 break;
228 default:
229 return CMD_RET_USAGE;
230 }
231 }
232 }
233 debug("Final value for argc=%d\n", argc);
234 name = argv[1];
235
236 if (strchr(name, '=')) {
237 printf("## Error: illegal character '='"
238 "in variable name \"%s\"\n", name);
239 return 1;
240 }
241
242 env_id++;
243
244 /* Delete only ? */
245 if (argc < 3 || argv[2] == NULL) {
246 int rc = hdelete_r(name, &env_htab, env_flag);
247 return !rc;
248 }
249
250 /*
251 * Insert / replace new value
252 */
253 for (i = 2, len = 0; i < argc; ++i)
254 len += strlen(argv[i]) + 1;
255
256 value = malloc(len);
257 if (value == NULL) {
258 printf("## Can't malloc %d bytes\n", len);
259 return 1;
260 }
261 for (i = 2, s = value; i < argc; ++i) {
262 char *v = argv[i];
263
264 while ((*s++ = *v++) != '\0')
265 ;
266 *(s - 1) = ' ';
267 }
268 if (s != value)
269 *--s = '\0';
270
271 e.key = name;
272 e.data = value;
273 hsearch_r(e, ENTER, &ep, &env_htab, env_flag);
274 free(value);
275 if (!ep) {
276 printf("## Error inserting \"%s\" variable, errno=%d\n",
277 name, errno);
278 return 1;
279 }
280
281 return 0;
282 }
283
284 int env_set(const char *varname, const char *varvalue)
285 {
286 const char * const argv[4] = { "setenv", varname, varvalue, NULL };
287
288 /* before import into hashtable */
289 if (!(gd->flags & GD_FLG_ENV_READY))
290 return 1;
291
292 if (varvalue == NULL || varvalue[0] == '\0')
293 return _do_env_set(0, 2, (char * const *)argv, H_PROGRAMMATIC);
294 else
295 return _do_env_set(0, 3, (char * const *)argv, H_PROGRAMMATIC);
296 }
297
298 /**
299 * Set an environment variable to an integer value
300 *
301 * @param varname Environment variable to set
302 * @param value Value to set it to
303 * @return 0 if ok, 1 on error
304 */
305 int env_set_ulong(const char *varname, ulong value)
306 {
307 /* TODO: this should be unsigned */
308 char *str = simple_itoa(value);
309
310 return env_set(varname, str);
311 }
312
313 /**
314 * Set an environment variable to an value in hex
315 *
316 * @param varname Environment variable to set
317 * @param value Value to set it to
318 * @return 0 if ok, 1 on error
319 */
320 int env_set_hex(const char *varname, ulong value)
321 {
322 char str[17];
323
324 sprintf(str, "%lx", value);
325 return env_set(varname, str);
326 }
327
328 ulong env_get_hex(const char *varname, ulong default_val)
329 {
330 const char *s;
331 ulong value;
332 char *endp;
333
334 s = env_get(varname);
335 if (s)
336 value = simple_strtoul(s, &endp, 16);
337 if (!s || endp == s)
338 return default_val;
339
340 return value;
341 }
342
343 void eth_parse_enetaddr(const char *addr, uint8_t *enetaddr)
344 {
345 char *end;
346 int i;
347
348 for (i = 0; i < 6; ++i) {
349 enetaddr[i] = addr ? simple_strtoul(addr, &end, 16) : 0;
350 if (addr)
351 addr = (*end) ? end + 1 : end;
352 }
353 }
354
355 int eth_env_get_enetaddr(const char *name, uint8_t *enetaddr)
356 {
357 eth_parse_enetaddr(env_get(name), enetaddr);
358 return is_valid_ethaddr(enetaddr);
359 }
360
361 int eth_env_set_enetaddr(const char *name, const uint8_t *enetaddr)
362 {
363 char buf[ARP_HLEN_ASCII + 1];
364
365 if (eth_env_get_enetaddr(name, (uint8_t *)buf))
366 return -EEXIST;
367
368 sprintf(buf, "%pM", enetaddr);
369
370 return env_set(name, buf);
371 }
372
373 #ifndef CONFIG_SPL_BUILD
374 static int do_env_set(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
375 {
376 if (argc < 2)
377 return CMD_RET_USAGE;
378
379 return _do_env_set(flag, argc, argv, H_INTERACTIVE);
380 }
381
382 /*
383 * Prompt for environment variable
384 */
385 #if defined(CONFIG_CMD_ASKENV)
386 int do_env_ask(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
387 {
388 char message[CONFIG_SYS_CBSIZE];
389 int i, len, pos, size;
390 char *local_args[4];
391 char *endptr;
392
393 local_args[0] = argv[0];
394 local_args[1] = argv[1];
395 local_args[2] = NULL;
396 local_args[3] = NULL;
397
398 /*
399 * Check the syntax:
400 *
401 * env_ask envname [message1 ...] [size]
402 */
403 if (argc == 1)
404 return CMD_RET_USAGE;
405
406 /*
407 * We test the last argument if it can be converted
408 * into a decimal number. If yes, we assume it's
409 * the size. Otherwise we echo it as part of the
410 * message.
411 */
412 i = simple_strtoul(argv[argc - 1], &endptr, 10);
413 if (*endptr != '\0') { /* no size */
414 size = CONFIG_SYS_CBSIZE - 1;
415 } else { /* size given */
416 size = i;
417 --argc;
418 }
419
420 if (argc <= 2) {
421 sprintf(message, "Please enter '%s': ", argv[1]);
422 } else {
423 /* env_ask envname message1 ... messagen [size] */
424 for (i = 2, pos = 0; i < argc && pos+1 < sizeof(message); i++) {
425 if (pos)
426 message[pos++] = ' ';
427
428 strncpy(message + pos, argv[i], sizeof(message) - pos);
429 pos += strlen(argv[i]);
430 }
431 if (pos < sizeof(message) - 1) {
432 message[pos++] = ' ';
433 message[pos] = '\0';
434 } else
435 message[CONFIG_SYS_CBSIZE - 1] = '\0';
436 }
437
438 if (size >= CONFIG_SYS_CBSIZE)
439 size = CONFIG_SYS_CBSIZE - 1;
440
441 if (size <= 0)
442 return 1;
443
444 /* prompt for input */
445 len = cli_readline(message);
446
447 if (size < len)
448 console_buffer[size] = '\0';
449
450 len = 2;
451 if (console_buffer[0] != '\0') {
452 local_args[2] = console_buffer;
453 len = 3;
454 }
455
456 /* Continue calling setenv code */
457 return _do_env_set(flag, len, local_args, H_INTERACTIVE);
458 }
459 #endif
460
461 #if defined(CONFIG_CMD_ENV_CALLBACK)
462 static int print_static_binding(const char *var_name, const char *callback_name,
463 void *priv)
464 {
465 printf("\t%-20s %-20s\n", var_name, callback_name);
466
467 return 0;
468 }
469
470 static int print_active_callback(ENTRY *entry)
471 {
472 struct env_clbk_tbl *clbkp;
473 int i;
474 int num_callbacks;
475
476 if (entry->callback == NULL)
477 return 0;
478
479 /* look up the callback in the linker-list */
480 num_callbacks = ll_entry_count(struct env_clbk_tbl, env_clbk);
481 for (i = 0, clbkp = ll_entry_start(struct env_clbk_tbl, env_clbk);
482 i < num_callbacks;
483 i++, clbkp++) {
484 #if defined(CONFIG_NEEDS_MANUAL_RELOC)
485 if (entry->callback == clbkp->callback + gd->reloc_off)
486 #else
487 if (entry->callback == clbkp->callback)
488 #endif
489 break;
490 }
491
492 if (i == num_callbacks)
493 /* this should probably never happen, but just in case... */
494 printf("\t%-20s %p\n", entry->key, entry->callback);
495 else
496 printf("\t%-20s %-20s\n", entry->key, clbkp->name);
497
498 return 0;
499 }
500
501 /*
502 * Print the callbacks available and what they are bound to
503 */
504 int do_env_callback(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
505 {
506 struct env_clbk_tbl *clbkp;
507 int i;
508 int num_callbacks;
509
510 /* Print the available callbacks */
511 puts("Available callbacks:\n");
512 puts("\tCallback Name\n");
513 puts("\t-------------\n");
514 num_callbacks = ll_entry_count(struct env_clbk_tbl, env_clbk);
515 for (i = 0, clbkp = ll_entry_start(struct env_clbk_tbl, env_clbk);
516 i < num_callbacks;
517 i++, clbkp++)
518 printf("\t%s\n", clbkp->name);
519 puts("\n");
520
521 /* Print the static bindings that may exist */
522 puts("Static callback bindings:\n");
523 printf("\t%-20s %-20s\n", "Variable Name", "Callback Name");
524 printf("\t%-20s %-20s\n", "-------------", "-------------");
525 env_attr_walk(ENV_CALLBACK_LIST_STATIC, print_static_binding, NULL);
526 puts("\n");
527
528 /* walk through each variable and print the callback if it has one */
529 puts("Active callback bindings:\n");
530 printf("\t%-20s %-20s\n", "Variable Name", "Callback Name");
531 printf("\t%-20s %-20s\n", "-------------", "-------------");
532 hwalk_r(&env_htab, print_active_callback);
533 return 0;
534 }
535 #endif
536
537 #if defined(CONFIG_CMD_ENV_FLAGS)
538 static int print_static_flags(const char *var_name, const char *flags,
539 void *priv)
540 {
541 enum env_flags_vartype type = env_flags_parse_vartype(flags);
542 enum env_flags_varaccess access = env_flags_parse_varaccess(flags);
543
544 printf("\t%-20s %-20s %-20s\n", var_name,
545 env_flags_get_vartype_name(type),
546 env_flags_get_varaccess_name(access));
547
548 return 0;
549 }
550
551 static int print_active_flags(ENTRY *entry)
552 {
553 enum env_flags_vartype type;
554 enum env_flags_varaccess access;
555
556 if (entry->flags == 0)
557 return 0;
558
559 type = (enum env_flags_vartype)
560 (entry->flags & ENV_FLAGS_VARTYPE_BIN_MASK);
561 access = env_flags_parse_varaccess_from_binflags(entry->flags);
562 printf("\t%-20s %-20s %-20s\n", entry->key,
563 env_flags_get_vartype_name(type),
564 env_flags_get_varaccess_name(access));
565
566 return 0;
567 }
568
569 /*
570 * Print the flags available and what variables have flags
571 */
572 int do_env_flags(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
573 {
574 /* Print the available variable types */
575 printf("Available variable type flags (position %d):\n",
576 ENV_FLAGS_VARTYPE_LOC);
577 puts("\tFlag\tVariable Type Name\n");
578 puts("\t----\t------------------\n");
579 env_flags_print_vartypes();
580 puts("\n");
581
582 /* Print the available variable access types */
583 printf("Available variable access flags (position %d):\n",
584 ENV_FLAGS_VARACCESS_LOC);
585 puts("\tFlag\tVariable Access Name\n");
586 puts("\t----\t--------------------\n");
587 env_flags_print_varaccess();
588 puts("\n");
589
590 /* Print the static flags that may exist */
591 puts("Static flags:\n");
592 printf("\t%-20s %-20s %-20s\n", "Variable Name", "Variable Type",
593 "Variable Access");
594 printf("\t%-20s %-20s %-20s\n", "-------------", "-------------",
595 "---------------");
596 env_attr_walk(ENV_FLAGS_LIST_STATIC, print_static_flags, NULL);
597 puts("\n");
598
599 /* walk through each variable and print the flags if non-default */
600 puts("Active flags:\n");
601 printf("\t%-20s %-20s %-20s\n", "Variable Name", "Variable Type",
602 "Variable Access");
603 printf("\t%-20s %-20s %-20s\n", "-------------", "-------------",
604 "---------------");
605 hwalk_r(&env_htab, print_active_flags);
606 return 0;
607 }
608 #endif
609
610 /*
611 * Interactively edit an environment variable
612 */
613 #if defined(CONFIG_CMD_EDITENV)
614 static int do_env_edit(cmd_tbl_t *cmdtp, int flag, int argc,
615 char * const argv[])
616 {
617 char buffer[CONFIG_SYS_CBSIZE];
618 char *init_val;
619
620 if (argc < 2)
621 return CMD_RET_USAGE;
622
623 /* before import into hashtable */
624 if (!(gd->flags & GD_FLG_ENV_READY))
625 return 1;
626
627 /* Set read buffer to initial value or empty sting */
628 init_val = env_get(argv[1]);
629 if (init_val)
630 snprintf(buffer, CONFIG_SYS_CBSIZE, "%s", init_val);
631 else
632 buffer[0] = '\0';
633
634 if (cli_readline_into_buffer("edit: ", buffer, 0) < 0)
635 return 1;
636
637 if (buffer[0] == '\0') {
638 const char * const _argv[3] = { "setenv", argv[1], NULL };
639
640 return _do_env_set(0, 2, (char * const *)_argv, H_INTERACTIVE);
641 } else {
642 const char * const _argv[4] = { "setenv", argv[1], buffer,
643 NULL };
644
645 return _do_env_set(0, 3, (char * const *)_argv, H_INTERACTIVE);
646 }
647 }
648 #endif /* CONFIG_CMD_EDITENV */
649 #endif /* CONFIG_SPL_BUILD */
650
651 /*
652 * Look up variable from environment,
653 * return address of storage for that variable,
654 * or NULL if not found
655 */
656 char *env_get(const char *name)
657 {
658 if (gd->flags & GD_FLG_ENV_READY) { /* after import into hashtable */
659 ENTRY e, *ep;
660
661 WATCHDOG_RESET();
662
663 e.key = name;
664 e.data = NULL;
665 hsearch_r(e, FIND, &ep, &env_htab, 0);
666
667 return ep ? ep->data : NULL;
668 }
669
670 /* restricted capabilities before import */
671 if (env_get_f(name, (char *)(gd->env_buf), sizeof(gd->env_buf)) > 0)
672 return (char *)(gd->env_buf);
673
674 return NULL;
675 }
676
677 /*
678 * Look up variable from environment for restricted C runtime env.
679 */
680 int env_get_f(const char *name, char *buf, unsigned len)
681 {
682 int i, nxt, c;
683
684 for (i = 0; env_get_char(i) != '\0'; i = nxt + 1) {
685 int val, n;
686
687 for (nxt = i; (c = env_get_char(nxt)) != '\0'; ++nxt) {
688 if (c < 0)
689 return c;
690 if (nxt >= CONFIG_ENV_SIZE)
691 return -1;
692 }
693
694 val = envmatch((uchar *)name, i);
695 if (val < 0)
696 continue;
697
698 /* found; copy out */
699 for (n = 0; n < len; ++n, ++buf) {
700 c = env_get_char(val++);
701 if (c < 0)
702 return c;
703 *buf = c;
704 if (*buf == '\0')
705 return n;
706 }
707
708 if (n)
709 *--buf = '\0';
710
711 printf("env_buf [%u bytes] too small for value of \"%s\"\n",
712 len, name);
713
714 return n;
715 }
716
717 return -1;
718 }
719
720 /**
721 * Decode the integer value of an environment variable and return it.
722 *
723 * @param name Name of environment variable
724 * @param base Number base to use (normally 10, or 16 for hex)
725 * @param default_val Default value to return if the variable is not
726 * found
727 * @return the decoded value, or default_val if not found
728 */
729 ulong env_get_ulong(const char *name, int base, ulong default_val)
730 {
731 /*
732 * We can use env_get() here, even before relocation, since the
733 * environment variable value is an integer and thus short.
734 */
735 const char *str = env_get(name);
736
737 return str ? simple_strtoul(str, NULL, base) : default_val;
738 }
739
740 #ifndef CONFIG_SPL_BUILD
741 #if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE)
742 static int do_env_save(cmd_tbl_t *cmdtp, int flag, int argc,
743 char * const argv[])
744 {
745 return env_save() ? 1 : 0;
746 }
747
748 U_BOOT_CMD(
749 saveenv, 1, 0, do_env_save,
750 "save environment variables to persistent storage",
751 ""
752 );
753 #endif
754 #endif /* CONFIG_SPL_BUILD */
755
756
757 /*
758 * Match a name / name=value pair
759 *
760 * s1 is either a simple 'name', or a 'name=value' pair.
761 * i2 is the environment index for a 'name2=value2' pair.
762 * If the names match, return the index for the value2, else -1.
763 */
764 int envmatch(uchar *s1, int i2)
765 {
766 if (s1 == NULL)
767 return -1;
768
769 while (*s1 == env_get_char(i2++))
770 if (*s1++ == '=')
771 return i2;
772
773 if (*s1 == '\0' && env_get_char(i2-1) == '=')
774 return i2;
775
776 return -1;
777 }
778
779 #ifndef CONFIG_SPL_BUILD
780 static int do_env_default(cmd_tbl_t *cmdtp, int flag,
781 int argc, char * const argv[])
782 {
783 int all = 0, env_flag = H_INTERACTIVE;
784
785 debug("Initial value for argc=%d\n", argc);
786 while (--argc > 0 && **++argv == '-') {
787 char *arg = *argv;
788
789 while (*++arg) {
790 switch (*arg) {
791 case 'a': /* default all */
792 all = 1;
793 break;
794 case 'f': /* force */
795 env_flag |= H_FORCE;
796 break;
797 default:
798 return cmd_usage(cmdtp);
799 }
800 }
801 }
802 debug("Final value for argc=%d\n", argc);
803 if (all && (argc == 0)) {
804 /* Reset the whole environment */
805 set_default_env("## Resetting to default environment\n",
806 env_flag);
807 return 0;
808 }
809 if (!all && (argc > 0)) {
810 /* Reset individual variables */
811 set_default_vars(argc, argv, env_flag);
812 return 0;
813 }
814
815 return cmd_usage(cmdtp);
816 }
817
818 static int do_env_delete(cmd_tbl_t *cmdtp, int flag,
819 int argc, char * const argv[])
820 {
821 int env_flag = H_INTERACTIVE;
822 int ret = 0;
823
824 debug("Initial value for argc=%d\n", argc);
825 while (argc > 1 && **(argv + 1) == '-') {
826 char *arg = *++argv;
827
828 --argc;
829 while (*++arg) {
830 switch (*arg) {
831 case 'f': /* force */
832 env_flag |= H_FORCE;
833 break;
834 default:
835 return CMD_RET_USAGE;
836 }
837 }
838 }
839 debug("Final value for argc=%d\n", argc);
840
841 env_id++;
842
843 while (--argc > 0) {
844 char *name = *++argv;
845
846 if (!hdelete_r(name, &env_htab, env_flag))
847 ret = 1;
848 }
849
850 return ret;
851 }
852
853 #ifdef CONFIG_CMD_EXPORTENV
854 /*
855 * env export [-t | -b | -c] [-s size] addr [var ...]
856 * -t: export as text format; if size is given, data will be
857 * padded with '\0' bytes; if not, one terminating '\0'
858 * will be added (which is included in the "filesize"
859 * setting so you can for exmple copy this to flash and
860 * keep the termination).
861 * -b: export as binary format (name=value pairs separated by
862 * '\0', list end marked by double "\0\0")
863 * -c: export as checksum protected environment format as
864 * used for example by "saveenv" command
865 * -s size:
866 * size of output buffer
867 * addr: memory address where environment gets stored
868 * var... List of variable names that get included into the
869 * export. Without arguments, the whole environment gets
870 * exported.
871 *
872 * With "-c" and size is NOT given, then the export command will
873 * format the data as currently used for the persistent storage,
874 * i. e. it will use CONFIG_ENV_SECT_SIZE as output block size and
875 * prepend a valid CRC32 checksum and, in case of redundant
876 * environment, a "current" redundancy flag. If size is given, this
877 * value will be used instead of CONFIG_ENV_SECT_SIZE; again, CRC32
878 * checksum and redundancy flag will be inserted.
879 *
880 * With "-b" and "-t", always only the real data (including a
881 * terminating '\0' byte) will be written; here the optional size
882 * argument will be used to make sure not to overflow the user
883 * provided buffer; the command will abort if the size is not
884 * sufficient. Any remaining space will be '\0' padded.
885 *
886 * On successful return, the variable "filesize" will be set.
887 * Note that filesize includes the trailing/terminating '\0' byte(s).
888 *
889 * Usage scenario: create a text snapshot/backup of the current settings:
890 *
891 * => env export -t 100000
892 * => era ${backup_addr} +${filesize}
893 * => cp.b 100000 ${backup_addr} ${filesize}
894 *
895 * Re-import this snapshot, deleting all other settings:
896 *
897 * => env import -d -t ${backup_addr}
898 */
899 static int do_env_export(cmd_tbl_t *cmdtp, int flag,
900 int argc, char * const argv[])
901 {
902 char buf[32];
903 ulong addr;
904 char *ptr, *cmd, *res;
905 size_t size = 0;
906 ssize_t len;
907 env_t *envp;
908 char sep = '\n';
909 int chk = 0;
910 int fmt = 0;
911
912 cmd = *argv;
913
914 while (--argc > 0 && **++argv == '-') {
915 char *arg = *argv;
916 while (*++arg) {
917 switch (*arg) {
918 case 'b': /* raw binary format */
919 if (fmt++)
920 goto sep_err;
921 sep = '\0';
922 break;
923 case 'c': /* external checksum format */
924 if (fmt++)
925 goto sep_err;
926 sep = '\0';
927 chk = 1;
928 break;
929 case 's': /* size given */
930 if (--argc <= 0)
931 return cmd_usage(cmdtp);
932 size = simple_strtoul(*++argv, NULL, 16);
933 goto NXTARG;
934 case 't': /* text format */
935 if (fmt++)
936 goto sep_err;
937 sep = '\n';
938 break;
939 default:
940 return CMD_RET_USAGE;
941 }
942 }
943 NXTARG: ;
944 }
945
946 if (argc < 1)
947 return CMD_RET_USAGE;
948
949 addr = simple_strtoul(argv[0], NULL, 16);
950 ptr = map_sysmem(addr, size);
951
952 if (size)
953 memset(ptr, '\0', size);
954
955 argc--;
956 argv++;
957
958 if (sep) { /* export as text file */
959 len = hexport_r(&env_htab, sep,
960 H_MATCH_KEY | H_MATCH_IDENT,
961 &ptr, size, argc, argv);
962 if (len < 0) {
963 pr_err("## Error: Cannot export environment: errno = %d\n",
964 errno);
965 return 1;
966 }
967 sprintf(buf, "%zX", (size_t)len);
968 env_set("filesize", buf);
969
970 return 0;
971 }
972
973 envp = (env_t *)ptr;
974
975 if (chk) /* export as checksum protected block */
976 res = (char *)envp->data;
977 else /* export as raw binary data */
978 res = ptr;
979
980 len = hexport_r(&env_htab, '\0',
981 H_MATCH_KEY | H_MATCH_IDENT,
982 &res, ENV_SIZE, argc, argv);
983 if (len < 0) {
984 pr_err("## Error: Cannot export environment: errno = %d\n",
985 errno);
986 return 1;
987 }
988
989 if (chk) {
990 envp->crc = crc32(0, envp->data,
991 size ? size - offsetof(env_t, data) : ENV_SIZE);
992 #ifdef CONFIG_ENV_ADDR_REDUND
993 envp->flags = ACTIVE_FLAG;
994 #endif
995 }
996 env_set_hex("filesize", len + offsetof(env_t, data));
997
998 return 0;
999
1000 sep_err:
1001 printf("## Error: %s: only one of \"-b\", \"-c\" or \"-t\" allowed\n",
1002 cmd);
1003 return 1;
1004 }
1005 #endif
1006
1007 #ifdef CONFIG_CMD_IMPORTENV
1008 /*
1009 * env import [-d] [-t [-r] | -b | -c] addr [size] [var ...]
1010 * -d: delete existing environment before importing if no var is
1011 * passed; if vars are passed, if one var is in the current
1012 * environment but not in the environment at addr, delete var from
1013 * current environment;
1014 * otherwise overwrite / append to existing definitions
1015 * -t: assume text format; either "size" must be given or the
1016 * text data must be '\0' terminated
1017 * -r: handle CRLF like LF, that means exported variables with
1018 * a content which ends with \r won't get imported. Used
1019 * to import text files created with editors which are using CRLF
1020 * for line endings. Only effective in addition to -t.
1021 * -b: assume binary format ('\0' separated, "\0\0" terminated)
1022 * -c: assume checksum protected environment format
1023 * addr: memory address to read from
1024 * size: length of input data; if missing, proper '\0'
1025 * termination is mandatory
1026 * if var is set and size should be missing (i.e. '\0'
1027 * termination), set size to '-'
1028 * var... List of the names of the only variables that get imported from
1029 * the environment at address 'addr'. Without arguments, the whole
1030 * environment gets imported.
1031 */
1032 static int do_env_import(cmd_tbl_t *cmdtp, int flag,
1033 int argc, char * const argv[])
1034 {
1035 ulong addr;
1036 char *cmd, *ptr;
1037 char sep = '\n';
1038 int chk = 0;
1039 int fmt = 0;
1040 int del = 0;
1041 int crlf_is_lf = 0;
1042 int wl = 0;
1043 size_t size;
1044
1045 cmd = *argv;
1046
1047 while (--argc > 0 && **++argv == '-') {
1048 char *arg = *argv;
1049 while (*++arg) {
1050 switch (*arg) {
1051 case 'b': /* raw binary format */
1052 if (fmt++)
1053 goto sep_err;
1054 sep = '\0';
1055 break;
1056 case 'c': /* external checksum format */
1057 if (fmt++)
1058 goto sep_err;
1059 sep = '\0';
1060 chk = 1;
1061 break;
1062 case 't': /* text format */
1063 if (fmt++)
1064 goto sep_err;
1065 sep = '\n';
1066 break;
1067 case 'r': /* handle CRLF like LF */
1068 crlf_is_lf = 1;
1069 break;
1070 case 'd':
1071 del = 1;
1072 break;
1073 default:
1074 return CMD_RET_USAGE;
1075 }
1076 }
1077 }
1078
1079 if (argc < 1)
1080 return CMD_RET_USAGE;
1081
1082 if (!fmt)
1083 printf("## Warning: defaulting to text format\n");
1084
1085 if (sep != '\n' && crlf_is_lf )
1086 crlf_is_lf = 0;
1087
1088 addr = simple_strtoul(argv[0], NULL, 16);
1089 ptr = map_sysmem(addr, 0);
1090
1091 if (argc >= 2 && strcmp(argv[1], "-")) {
1092 size = simple_strtoul(argv[1], NULL, 16);
1093 } else if (chk) {
1094 puts("## Error: external checksum format must pass size\n");
1095 return CMD_RET_FAILURE;
1096 } else {
1097 char *s = ptr;
1098
1099 size = 0;
1100
1101 while (size < MAX_ENV_SIZE) {
1102 if ((*s == sep) && (*(s+1) == '\0'))
1103 break;
1104 ++s;
1105 ++size;
1106 }
1107 if (size == MAX_ENV_SIZE) {
1108 printf("## Warning: Input data exceeds %d bytes"
1109 " - truncated\n", MAX_ENV_SIZE);
1110 }
1111 size += 2;
1112 printf("## Info: input data size = %zu = 0x%zX\n", size, size);
1113 }
1114
1115 if (argc > 2)
1116 wl = 1;
1117
1118 if (chk) {
1119 uint32_t crc;
1120 env_t *ep = (env_t *)ptr;
1121
1122 size -= offsetof(env_t, data);
1123 memcpy(&crc, &ep->crc, sizeof(crc));
1124
1125 if (crc32(0, ep->data, size) != crc) {
1126 puts("## Error: bad CRC, import failed\n");
1127 return 1;
1128 }
1129 ptr = (char *)ep->data;
1130 }
1131
1132 if (!himport_r(&env_htab, ptr, size, sep, del ? 0 : H_NOCLEAR,
1133 crlf_is_lf, wl ? argc - 2 : 0, wl ? &argv[2] : NULL)) {
1134 pr_err("## Error: Environment import failed: errno = %d\n",
1135 errno);
1136 return 1;
1137 }
1138 gd->flags |= GD_FLG_ENV_READY;
1139
1140 return 0;
1141
1142 sep_err:
1143 printf("## %s: only one of \"-b\", \"-c\" or \"-t\" allowed\n",
1144 cmd);
1145 return 1;
1146 }
1147 #endif
1148
1149 #if defined(CONFIG_CMD_ENV_EXISTS)
1150 static int do_env_exists(cmd_tbl_t *cmdtp, int flag, int argc,
1151 char * const argv[])
1152 {
1153 ENTRY e, *ep;
1154
1155 if (argc < 2)
1156 return CMD_RET_USAGE;
1157
1158 e.key = argv[1];
1159 e.data = NULL;
1160 hsearch_r(e, FIND, &ep, &env_htab, 0);
1161
1162 return (ep == NULL) ? 1 : 0;
1163 }
1164 #endif
1165
1166 /*
1167 * New command line interface: "env" command with subcommands
1168 */
1169 static cmd_tbl_t cmd_env_sub[] = {
1170 #if defined(CONFIG_CMD_ASKENV)
1171 U_BOOT_CMD_MKENT(ask, CONFIG_SYS_MAXARGS, 1, do_env_ask, "", ""),
1172 #endif
1173 U_BOOT_CMD_MKENT(default, 1, 0, do_env_default, "", ""),
1174 U_BOOT_CMD_MKENT(delete, CONFIG_SYS_MAXARGS, 0, do_env_delete, "", ""),
1175 #if defined(CONFIG_CMD_EDITENV)
1176 U_BOOT_CMD_MKENT(edit, 2, 0, do_env_edit, "", ""),
1177 #endif
1178 #if defined(CONFIG_CMD_ENV_CALLBACK)
1179 U_BOOT_CMD_MKENT(callbacks, 1, 0, do_env_callback, "", ""),
1180 #endif
1181 #if defined(CONFIG_CMD_ENV_FLAGS)
1182 U_BOOT_CMD_MKENT(flags, 1, 0, do_env_flags, "", ""),
1183 #endif
1184 #if defined(CONFIG_CMD_EXPORTENV)
1185 U_BOOT_CMD_MKENT(export, 4, 0, do_env_export, "", ""),
1186 #endif
1187 #if defined(CONFIG_CMD_GREPENV)
1188 U_BOOT_CMD_MKENT(grep, CONFIG_SYS_MAXARGS, 1, do_env_grep, "", ""),
1189 #endif
1190 #if defined(CONFIG_CMD_IMPORTENV)
1191 U_BOOT_CMD_MKENT(import, 5, 0, do_env_import, "", ""),
1192 #endif
1193 U_BOOT_CMD_MKENT(print, CONFIG_SYS_MAXARGS, 1, do_env_print, "", ""),
1194 #if defined(CONFIG_CMD_RUN)
1195 U_BOOT_CMD_MKENT(run, CONFIG_SYS_MAXARGS, 1, do_run, "", ""),
1196 #endif
1197 #if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE)
1198 U_BOOT_CMD_MKENT(save, 1, 0, do_env_save, "", ""),
1199 #endif
1200 U_BOOT_CMD_MKENT(set, CONFIG_SYS_MAXARGS, 0, do_env_set, "", ""),
1201 #if defined(CONFIG_CMD_ENV_EXISTS)
1202 U_BOOT_CMD_MKENT(exists, 2, 0, do_env_exists, "", ""),
1203 #endif
1204 };
1205
1206 #if defined(CONFIG_NEEDS_MANUAL_RELOC)
1207 void env_reloc(void)
1208 {
1209 fixup_cmdtable(cmd_env_sub, ARRAY_SIZE(cmd_env_sub));
1210 }
1211 #endif
1212
1213 static int do_env(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
1214 {
1215 cmd_tbl_t *cp;
1216
1217 if (argc < 2)
1218 return CMD_RET_USAGE;
1219
1220 /* drop initial "env" arg */
1221 argc--;
1222 argv++;
1223
1224 cp = find_cmd_tbl(argv[0], cmd_env_sub, ARRAY_SIZE(cmd_env_sub));
1225
1226 if (cp)
1227 return cp->cmd(cmdtp, flag, argc, argv);
1228
1229 return CMD_RET_USAGE;
1230 }
1231
1232 #ifdef CONFIG_SYS_LONGHELP
1233 static char env_help_text[] =
1234 #if defined(CONFIG_CMD_ASKENV)
1235 "ask name [message] [size] - ask for environment variable\nenv "
1236 #endif
1237 #if defined(CONFIG_CMD_ENV_CALLBACK)
1238 "callbacks - print callbacks and their associated variables\nenv "
1239 #endif
1240 "default [-f] -a - [forcibly] reset default environment\n"
1241 "env default [-f] var [...] - [forcibly] reset variable(s) to their default values\n"
1242 "env delete [-f] var [...] - [forcibly] delete variable(s)\n"
1243 #if defined(CONFIG_CMD_EDITENV)
1244 "env edit name - edit environment variable\n"
1245 #endif
1246 #if defined(CONFIG_CMD_ENV_EXISTS)
1247 "env exists name - tests for existence of variable\n"
1248 #endif
1249 #if defined(CONFIG_CMD_EXPORTENV)
1250 "env export [-t | -b | -c] [-s size] addr [var ...] - export environment\n"
1251 #endif
1252 #if defined(CONFIG_CMD_ENV_FLAGS)
1253 "env flags - print variables that have non-default flags\n"
1254 #endif
1255 #if defined(CONFIG_CMD_GREPENV)
1256 #ifdef CONFIG_REGEX
1257 "env grep [-e] [-n | -v | -b] string [...] - search environment\n"
1258 #else
1259 "env grep [-n | -v | -b] string [...] - search environment\n"
1260 #endif
1261 #endif
1262 #if defined(CONFIG_CMD_IMPORTENV)
1263 "env import [-d] [-t [-r] | -b | -c] addr [size] [var ...] - import environment\n"
1264 #endif
1265 "env print [-a | name ...] - print environment\n"
1266 #if defined(CONFIG_CMD_RUN)
1267 "env run var [...] - run commands in an environment variable\n"
1268 #endif
1269 #if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE)
1270 "env save - save environment\n"
1271 #endif
1272 "env set [-f] name [arg ...]\n";
1273 #endif
1274
1275 U_BOOT_CMD(
1276 env, CONFIG_SYS_MAXARGS, 1, do_env,
1277 "environment handling commands", env_help_text
1278 );
1279
1280 /*
1281 * Old command line interface, kept for compatibility
1282 */
1283
1284 #if defined(CONFIG_CMD_EDITENV)
1285 U_BOOT_CMD_COMPLETE(
1286 editenv, 2, 0, do_env_edit,
1287 "edit environment variable",
1288 "name\n"
1289 " - edit environment variable 'name'",
1290 var_complete
1291 );
1292 #endif
1293
1294 U_BOOT_CMD_COMPLETE(
1295 printenv, CONFIG_SYS_MAXARGS, 1, do_env_print,
1296 "print environment variables",
1297 "[-a]\n - print [all] values of all environment variables\n"
1298 "printenv name ...\n"
1299 " - print value of environment variable 'name'",
1300 var_complete
1301 );
1302
1303 #ifdef CONFIG_CMD_GREPENV
1304 U_BOOT_CMD_COMPLETE(
1305 grepenv, CONFIG_SYS_MAXARGS, 0, do_env_grep,
1306 "search environment variables",
1307 #ifdef CONFIG_REGEX
1308 "[-e] [-n | -v | -b] string ...\n"
1309 #else
1310 "[-n | -v | -b] string ...\n"
1311 #endif
1312 " - list environment name=value pairs matching 'string'\n"
1313 #ifdef CONFIG_REGEX
1314 " \"-e\": enable regular expressions;\n"
1315 #endif
1316 " \"-n\": search variable names; \"-v\": search values;\n"
1317 " \"-b\": search both names and values (default)",
1318 var_complete
1319 );
1320 #endif
1321
1322 U_BOOT_CMD_COMPLETE(
1323 setenv, CONFIG_SYS_MAXARGS, 0, do_env_set,
1324 "set environment variables",
1325 "[-f] name value ...\n"
1326 " - [forcibly] set environment variable 'name' to 'value ...'\n"
1327 "setenv [-f] name\n"
1328 " - [forcibly] delete environment variable 'name'",
1329 var_complete
1330 );
1331
1332 #if defined(CONFIG_CMD_ASKENV)
1333
1334 U_BOOT_CMD(
1335 askenv, CONFIG_SYS_MAXARGS, 1, do_env_ask,
1336 "get environment variables from stdin",
1337 "name [message] [size]\n"
1338 " - get environment variable 'name' from stdin (max 'size' chars)"
1339 );
1340 #endif
1341
1342 #if defined(CONFIG_CMD_RUN)
1343 U_BOOT_CMD_COMPLETE(
1344 run, CONFIG_SYS_MAXARGS, 1, do_run,
1345 "run commands in an environment variable",
1346 "var [...]\n"
1347 " - run the commands in the environment variable(s) 'var'",
1348 var_complete
1349 );
1350 #endif
1351 #endif /* CONFIG_SPL_BUILD */