3 * Denis Peter, MPL AG Switzerland
5 * Adapted for U-Boot driver model
6 * (C) Copyright 2015 Google, Inc
8 * Most of this source has been derived from the Linux USB
11 * SPDX-License-Identifier: GPL-2.0+
18 #include <dm/uclass-internal.h>
20 #include <asm/byteorder.h>
21 #include <asm/unaligned.h>
25 #ifdef CONFIG_USB_STORAGE
26 static int usb_stor_curr_dev
= -1; /* current device */
28 #if defined(CONFIG_USB_HOST_ETHER) && !defined(CONFIG_DM_ETH)
29 static int __maybe_unused usb_ether_curr_dev
= -1; /* current ethernet device */
32 /* some display routines (info command) */
33 static char *usb_get_class_desc(unsigned char dclass
)
36 case USB_CLASS_PER_INTERFACE
:
37 return "See Interface";
41 return "Communication";
43 return "Human Interface";
44 case USB_CLASS_PRINTER
:
46 case USB_CLASS_MASS_STORAGE
:
47 return "Mass Storage";
52 case USB_CLASS_VENDOR_SPEC
:
53 return "Vendor specific";
59 static void usb_display_class_sub(unsigned char dclass
, unsigned char subclass
,
63 case USB_CLASS_PER_INTERFACE
:
64 printf("See Interface");
67 printf("Human Interface, Subclass: ");
69 case USB_SUB_HID_NONE
:
72 case USB_SUB_HID_BOOT
:
75 case USB_PROT_HID_NONE
:
78 case USB_PROT_HID_KEYBOARD
:
81 case USB_PROT_HID_MOUSE
:
94 case USB_CLASS_MASS_STORAGE
:
95 printf("Mass Storage, ");
101 printf("SFF-8020i (ATAPI)");
104 printf("QIC-157 (Tape)");
113 printf("Transp. SCSI");
122 printf("Command/Bulk");
125 printf("Command/Bulk/Int");
136 printf("%s", usb_get_class_desc(dclass
));
141 static void usb_display_string(struct usb_device
*dev
, int index
)
143 ALLOC_CACHE_ALIGN_BUFFER(char, buffer
, 256);
146 if (usb_string(dev
, index
, &buffer
[0], 256) > 0)
147 printf("String: \"%s\"", buffer
);
151 static void usb_display_desc(struct usb_device
*dev
)
153 if (dev
->descriptor
.bDescriptorType
== USB_DT_DEVICE
) {
154 printf("%d: %s, USB Revision %x.%x\n", dev
->devnum
,
155 usb_get_class_desc(dev
->config
.if_desc
[0].desc
.bInterfaceClass
),
156 (dev
->descriptor
.bcdUSB
>>8) & 0xff,
157 dev
->descriptor
.bcdUSB
& 0xff);
159 if (strlen(dev
->mf
) || strlen(dev
->prod
) ||
161 printf(" - %s %s %s\n", dev
->mf
, dev
->prod
,
163 if (dev
->descriptor
.bDeviceClass
) {
164 printf(" - Class: ");
165 usb_display_class_sub(dev
->descriptor
.bDeviceClass
,
166 dev
->descriptor
.bDeviceSubClass
,
167 dev
->descriptor
.bDeviceProtocol
);
170 printf(" - Class: (from Interface) %s\n",
172 dev
->config
.if_desc
[0].desc
.bInterfaceClass
));
174 printf(" - PacketSize: %d Configurations: %d\n",
175 dev
->descriptor
.bMaxPacketSize0
,
176 dev
->descriptor
.bNumConfigurations
);
177 printf(" - Vendor: 0x%04x Product 0x%04x Version %d.%d\n",
178 dev
->descriptor
.idVendor
, dev
->descriptor
.idProduct
,
179 (dev
->descriptor
.bcdDevice
>>8) & 0xff,
180 dev
->descriptor
.bcdDevice
& 0xff);
185 static void usb_display_conf_desc(struct usb_config_descriptor
*config
,
186 struct usb_device
*dev
)
188 printf(" Configuration: %d\n", config
->bConfigurationValue
);
189 printf(" - Interfaces: %d %s%s%dmA\n", config
->bNumInterfaces
,
190 (config
->bmAttributes
& 0x40) ? "Self Powered " : "Bus Powered ",
191 (config
->bmAttributes
& 0x20) ? "Remote Wakeup " : "",
192 config
->bMaxPower
*2);
193 if (config
->iConfiguration
) {
195 usb_display_string(dev
, config
->iConfiguration
);
200 static void usb_display_if_desc(struct usb_interface_descriptor
*ifdesc
,
201 struct usb_device
*dev
)
203 printf(" Interface: %d\n", ifdesc
->bInterfaceNumber
);
204 printf(" - Alternate Setting %d, Endpoints: %d\n",
205 ifdesc
->bAlternateSetting
, ifdesc
->bNumEndpoints
);
207 usb_display_class_sub(ifdesc
->bInterfaceClass
,
208 ifdesc
->bInterfaceSubClass
, ifdesc
->bInterfaceProtocol
);
210 if (ifdesc
->iInterface
) {
212 usb_display_string(dev
, ifdesc
->iInterface
);
217 static void usb_display_ep_desc(struct usb_endpoint_descriptor
*epdesc
)
219 printf(" - Endpoint %d %s ", epdesc
->bEndpointAddress
& 0xf,
220 (epdesc
->bEndpointAddress
& 0x80) ? "In" : "Out");
221 switch ((epdesc
->bmAttributes
& 0x03)) {
226 printf("Isochronous");
235 printf(" MaxPacket %d", get_unaligned(&epdesc
->wMaxPacketSize
));
236 if ((epdesc
->bmAttributes
& 0x03) == 0x3)
237 printf(" Interval %dms", epdesc
->bInterval
);
241 /* main routine to diasplay the configs, interfaces and endpoints */
242 static void usb_display_config(struct usb_device
*dev
)
244 struct usb_config
*config
;
245 struct usb_interface
*ifdesc
;
246 struct usb_endpoint_descriptor
*epdesc
;
249 config
= &dev
->config
;
250 usb_display_conf_desc(&config
->desc
, dev
);
251 for (i
= 0; i
< config
->no_of_if
; i
++) {
252 ifdesc
= &config
->if_desc
[i
];
253 usb_display_if_desc(&ifdesc
->desc
, dev
);
254 for (ii
= 0; ii
< ifdesc
->no_of_ep
; ii
++) {
255 epdesc
= &ifdesc
->ep_desc
[ii
];
256 usb_display_ep_desc(epdesc
);
263 * With driver model this isn't right since we can have multiple controllers
264 * and the device numbering starts at 1 on each bus.
265 * TODO(sjg@chromium.org): Add a way to specify the controller/bus.
267 static struct usb_device
*usb_find_device(int devnum
)
270 struct usb_device
*udev
;
275 /* Device addresses start at 1 */
277 ret
= uclass_get(UCLASS_USB_HUB
, &uc
);
281 uclass_foreach_dev(hub
, uc
) {
284 if (!device_active(hub
))
286 udev
= dev_get_parent_priv(hub
);
287 if (udev
->devnum
== devnum
)
290 for (device_find_first_child(hub
, &dev
);
292 device_find_next_child(&dev
)) {
293 if (!device_active(hub
))
296 udev
= dev_get_parent_priv(dev
);
297 if (udev
->devnum
== devnum
)
302 struct usb_device
*udev
;
305 for (d
= 0; d
< USB_MAX_DEVICE
; d
++) {
306 udev
= usb_get_dev_index(d
);
309 if (udev
->devnum
== devnum
)
317 static inline char *portspeed(int speed
)
322 case USB_SPEED_SUPER
:
323 speed_str
= "5 Gb/s";
326 speed_str
= "480 Mb/s";
329 speed_str
= "1.5 Mb/s";
332 speed_str
= "12 Mb/s";
339 /* shows the device tree recursively */
340 static void usb_show_tree_graph(struct usb_device
*dev
, char *pre
)
343 int has_child
, last_child
;
348 has_child
= device_has_active_children(dev
->dev
);
350 /* check if the device has connected children */
354 for (i
= 0; i
< dev
->maxchild
; i
++) {
355 if (dev
->children
[i
] != NULL
)
359 /* check if we are the last one */
361 /* Not the root of the usb tree? */
362 if (device_get_uclass_id(dev
->dev
->parent
) != UCLASS_USB
) {
363 last_child
= device_is_last_sibling(dev
->dev
);
365 if (dev
->parent
!= NULL
) { /* not root? */
367 for (i
= 0; i
< dev
->parent
->maxchild
; i
++) {
368 /* search for children */
369 if (dev
->parent
->children
[i
] == dev
) {
370 /* found our pointer, see if we have a
373 while (i
++ < dev
->parent
->maxchild
) {
374 if (dev
->parent
->children
[i
] != NULL
) {
381 } /* for all children of the parent */
384 /* correct last child */
385 if (last_child
&& index
)
387 } /* if not root hub */
390 printf("%d ", dev
->devnum
);
392 pre
[index
++] = has_child
? '|' : ' ';
394 printf(" %s (%s, %dmA)\n", usb_get_class_desc(
395 dev
->config
.if_desc
[0].desc
.bInterfaceClass
),
396 portspeed(dev
->speed
),
397 dev
->config
.desc
.bMaxPower
* 2);
398 if (strlen(dev
->mf
) || strlen(dev
->prod
) || strlen(dev
->serial
))
399 printf(" %s %s %s %s\n", pre
, dev
->mf
, dev
->prod
, dev
->serial
);
400 printf(" %s\n", pre
);
402 struct udevice
*child
;
404 for (device_find_first_child(dev
->dev
, &child
);
406 device_find_next_child(&child
)) {
407 struct usb_device
*udev
;
409 if (!device_active(child
))
412 udev
= dev_get_parent_priv(child
);
414 /* Ignore emulators, we only want real devices */
415 if (device_get_uclass_id(child
) != UCLASS_USB_EMUL
) {
416 usb_show_tree_graph(udev
, pre
);
421 if (dev
->maxchild
> 0) {
422 for (i
= 0; i
< dev
->maxchild
; i
++) {
423 if (dev
->children
[i
] != NULL
) {
424 usb_show_tree_graph(dev
->children
[i
], pre
);
432 /* main routine for the tree command */
433 static void usb_show_subtree(struct usb_device
*dev
)
437 memset(preamble
, '\0', sizeof(preamble
));
438 usb_show_tree_graph(dev
, &preamble
[0]);
441 void usb_show_tree(void)
446 for (uclass_find_first_device(UCLASS_USB
, &bus
);
448 uclass_find_next_device(&bus
)) {
449 struct usb_device
*udev
;
452 if (!device_active(bus
))
455 device_find_first_child(bus
, &dev
);
456 if (dev
&& device_active(dev
)) {
457 udev
= dev_get_parent_priv(dev
);
458 usb_show_subtree(udev
);
462 struct usb_device
*udev
;
465 for (i
= 0; i
< USB_MAX_DEVICE
; i
++) {
466 udev
= usb_get_dev_index(i
);
469 if (udev
->parent
== NULL
)
470 usb_show_subtree(udev
);
475 static int usb_test(struct usb_device
*dev
, int port
, char* arg
)
479 if (port
> dev
->maxchild
) {
480 printf("Device is no hub or does not have %d ports.\n", port
);
487 printf("Setting Test_J mode");
488 mode
= USB_TEST_MODE_J
;
492 printf("Setting Test_K mode");
493 mode
= USB_TEST_MODE_K
;
497 printf("Setting Test_SE0_NAK mode");
498 mode
= USB_TEST_MODE_SE0_NAK
;
502 printf("Setting Test_Packet mode");
503 mode
= USB_TEST_MODE_PACKET
;
507 printf("Setting Test_Force_Enable mode");
508 mode
= USB_TEST_MODE_FORCE_ENABLE
;
511 printf("Unrecognized test mode: %s\nAvailable modes: "
512 "J, K, S[E0_NAK], P[acket], F[orce_Enable]\n", arg
);
517 printf(" on downstream facing port %d...\n", port
);
519 printf(" on upstream facing port...\n");
521 if (usb_control_msg(dev
, usb_sndctrlpipe(dev
, 0), USB_REQ_SET_FEATURE
,
522 port
? USB_RT_PORT
: USB_RECIP_DEVICE
,
523 port
? USB_PORT_FEAT_TEST
: USB_FEAT_TEST
,
525 NULL
, 0, USB_CNTL_TIMEOUT
) == -1) {
526 printf("Error during SET_FEATURE.\n");
529 printf("Test mode successfully set. Use 'usb start' "
530 "to return to normal operation.\n");
536 /******************************************************************************
537 * usb boot command intepreter. Derived from diskboot
539 #ifdef CONFIG_USB_STORAGE
540 static int do_usbboot(cmd_tbl_t
*cmdtp
, int flag
, int argc
, char * const argv
[])
542 return common_diskboot(cmdtp
, "usb", argc
, argv
);
544 #endif /* CONFIG_USB_STORAGE */
546 static int do_usb_stop_keyboard(int force
)
548 #if !defined CONFIG_DM_USB && defined CONFIG_USB_KEYBOARD
549 if (usb_kbd_deregister(force
) != 0) {
550 printf("USB not stopped: usbkbd still using USB\n");
557 static void do_usb_start(void)
559 bootstage_mark_name(BOOTSTAGE_ID_USB_START
, "usb_start");
564 /* Driver model will probe the devices as they are found */
565 #ifndef CONFIG_DM_USB
566 # ifdef CONFIG_USB_STORAGE
567 /* try to recognize storage devices immediately */
568 usb_stor_curr_dev
= usb_stor_scan(1);
570 # ifdef CONFIG_USB_KEYBOARD
573 #endif /* !CONFIG_DM_USB */
574 #ifdef CONFIG_USB_HOST_ETHER
575 # ifdef CONFIG_DM_ETH
576 # ifndef CONFIG_DM_USB
577 # error "You must use CONFIG_DM_USB if you want to use CONFIG_USB_HOST_ETHER with CONFIG_DM_ETH"
580 /* try to recognize ethernet devices immediately */
581 usb_ether_curr_dev
= usb_host_eth_scan(1);
587 static void show_info(struct udevice
*dev
)
589 struct udevice
*child
;
590 struct usb_device
*udev
;
592 udev
= dev_get_parent_priv(dev
);
593 usb_display_desc(udev
);
594 usb_display_config(udev
);
595 for (device_find_first_child(dev
, &child
);
597 device_find_next_child(&child
)) {
598 if (device_active(child
))
603 static int usb_device_info(void)
607 for (uclass_first_device(UCLASS_USB
, &bus
);
609 uclass_next_device(&bus
)) {
612 device_find_first_child(bus
, &hub
);
613 if (device_get_uclass_id(hub
) == UCLASS_USB_HUB
&&
614 device_active(hub
)) {
623 /******************************************************************************
624 * usb command intepreter
626 static int do_usb(cmd_tbl_t
*cmdtp
, int flag
, int argc
, char * const argv
[])
628 struct usb_device
*udev
= NULL
;
630 extern char usb_started
;
631 #ifdef CONFIG_USB_STORAGE
632 struct blk_desc
*stor_dev
;
636 return CMD_RET_USAGE
;
638 if (strncmp(argv
[1], "start", 5) == 0) {
640 return 0; /* Already started */
641 printf("starting USB...\n");
646 if (strncmp(argv
[1], "reset", 5) == 0) {
647 printf("resetting USB...\n");
648 if (do_usb_stop_keyboard(1) != 0)
654 if (strncmp(argv
[1], "stop", 4) == 0) {
656 console_assign(stdin
, "serial");
657 if (do_usb_stop_keyboard(0) != 0)
659 printf("stopping USB..\n");
664 printf("USB is stopped. Please issue 'usb start' first.\n");
667 if (strncmp(argv
[1], "tree", 4) == 0) {
668 puts("USB device tree:\n");
672 if (strncmp(argv
[1], "inf", 3) == 0) {
678 for (d
= 0; d
< USB_MAX_DEVICE
; d
++) {
679 udev
= usb_get_dev_index(d
);
682 usb_display_desc(udev
);
683 usb_display_config(udev
);
689 * With driver model this isn't right since we can
690 * have multiple controllers and the device numbering
691 * starts at 1 on each bus.
693 i
= simple_strtoul(argv
[2], NULL
, 10);
694 printf("config for device %d\n", i
);
695 udev
= usb_find_device(i
);
697 printf("*** No device available ***\n");
700 usb_display_desc(udev
);
701 usb_display_config(udev
);
706 if (strncmp(argv
[1], "test", 4) == 0) {
708 return CMD_RET_USAGE
;
709 i
= simple_strtoul(argv
[2], NULL
, 10);
710 udev
= usb_find_device(i
);
712 printf("Device %d does not exist.\n", i
);
715 i
= simple_strtoul(argv
[3], NULL
, 10);
716 return usb_test(udev
, i
, argv
[4]);
718 #ifdef CONFIG_USB_STORAGE
719 if (strncmp(argv
[1], "stor", 4) == 0)
720 return usb_stor_info();
722 if (strncmp(argv
[1], "part", 4) == 0) {
725 for (devno
= 0; ; ++devno
) {
726 stor_dev
= blk_get_devnum_by_type(IF_TYPE_USB
,
728 if (stor_dev
== NULL
)
730 if (stor_dev
->type
!= DEV_TYPE_UNKNOWN
) {
734 debug("print_part of %x\n", devno
);
735 part_print(stor_dev
);
739 devno
= simple_strtoul(argv
[2], NULL
, 16);
740 stor_dev
= blk_get_devnum_by_type(IF_TYPE_USB
, devno
);
741 if (stor_dev
!= NULL
&&
742 stor_dev
->type
!= DEV_TYPE_UNKNOWN
) {
744 debug("print_part of %x\n", devno
);
745 part_print(stor_dev
);
749 printf("\nno USB devices available\n");
754 if (strcmp(argv
[1], "read") == 0) {
755 if (usb_stor_curr_dev
< 0) {
756 printf("no current device selected\n");
760 unsigned long addr
= simple_strtoul(argv
[2], NULL
, 16);
761 unsigned long blk
= simple_strtoul(argv
[3], NULL
, 16);
762 unsigned long cnt
= simple_strtoul(argv
[4], NULL
, 16);
764 printf("\nUSB read: device %d block # %ld, count %ld"
765 " ... ", usb_stor_curr_dev
, blk
, cnt
);
766 stor_dev
= blk_get_devnum_by_type(IF_TYPE_USB
,
768 n
= blk_dread(stor_dev
, blk
, cnt
, (ulong
*)addr
);
769 printf("%ld blocks read: %s\n", n
,
770 (n
== cnt
) ? "OK" : "ERROR");
776 if (strcmp(argv
[1], "write") == 0) {
777 if (usb_stor_curr_dev
< 0) {
778 printf("no current device selected\n");
782 unsigned long addr
= simple_strtoul(argv
[2], NULL
, 16);
783 unsigned long blk
= simple_strtoul(argv
[3], NULL
, 16);
784 unsigned long cnt
= simple_strtoul(argv
[4], NULL
, 16);
786 printf("\nUSB write: device %d block # %ld, count %ld"
787 " ... ", usb_stor_curr_dev
, blk
, cnt
);
788 stor_dev
= blk_get_devnum_by_type(IF_TYPE_USB
,
790 n
= blk_dwrite(stor_dev
, blk
, cnt
, (ulong
*)addr
);
791 printf("%ld blocks write: %s\n", n
,
792 (n
== cnt
) ? "OK" : "ERROR");
798 if (strncmp(argv
[1], "dev", 3) == 0) {
800 int dev
= (int)simple_strtoul(argv
[2], NULL
, 10);
801 printf("\nUSB device %d: ", dev
);
802 stor_dev
= blk_get_devnum_by_type(IF_TYPE_USB
, dev
);
803 if ((stor_dev
== NULL
) ||
804 (stor_dev
->if_type
== IF_TYPE_UNKNOWN
)) {
805 printf("unknown device\n");
808 printf("\n Device %d: ", dev
);
810 if (stor_dev
->type
== DEV_TYPE_UNKNOWN
)
812 usb_stor_curr_dev
= dev
;
813 printf("... is now current device\n");
816 printf("\nUSB device %d: ", usb_stor_curr_dev
);
817 stor_dev
= blk_get_devnum_by_type(IF_TYPE_USB
,
820 if (stor_dev
->type
== DEV_TYPE_UNKNOWN
)
826 #endif /* CONFIG_USB_STORAGE */
827 return CMD_RET_USAGE
;
833 "start - start (scan) USB controller\n"
834 "usb reset - reset (rescan) USB controller\n"
835 "usb stop [f] - stop USB [f]=force stop\n"
836 "usb tree - show USB device tree\n"
837 "usb info [dev] - show available USB devices\n"
838 "usb test [dev] [port] [mode] - set USB 2.0 test mode\n"
839 " (specify port 0 to indicate the device's upstream port)\n"
840 " Available modes: J, K, S[E0_NAK], P[acket], F[orce_Enable]\n"
841 #ifdef CONFIG_USB_STORAGE
842 "usb storage - show details of USB storage devices\n"
843 "usb dev [dev] - show or set current USB storage device\n"
844 "usb part [dev] - print partition table of one or all USB storage"
846 "usb read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n"
847 " to memory address `addr'\n"
848 "usb write addr blk# cnt - write `cnt' blocks starting at block `blk#'\n"
849 " from memory address `addr'"
850 #endif /* CONFIG_USB_STORAGE */
854 #ifdef CONFIG_USB_STORAGE
856 usbboot
, 3, 1, do_usbboot
,
857 "boot from USB device",
860 #endif /* CONFIG_USB_STORAGE */