common/board_f.c

   1 /*
   2  * Copyright (c) 2011 The Chromium OS Authors.
   3  * (C) Copyright 2002-2006
   4  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   5  *
   6  * (C) Copyright 2002
   7  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
   8  * Marius Groeger <mgroeger@sysgo.de>
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #include <common.h>
  14 #include <linux/compiler.h>
  15 #include <version.h>
  16 #include <environment.h>
  17 #include <fdtdec.h>
  18 #include <fs.h>
  19 #if defined(CONFIG_CMD_IDE)
  20 #include <ide.h>
  21 #endif
  22 #include <i2c.h>
  23 #include <initcall.h>
  24 #include <logbuff.h>
  25
  26 /* TODO: Can we move these into arch/ headers? */
  27 #ifdef CONFIG_8xx
  28 #include <mpc8xx.h>
  29 #endif
  30 #ifdef CONFIG_5xx
  31 #include <mpc5xx.h>
  32 #endif
  33 #ifdef CONFIG_MPC5xxx
  34 #include <mpc5xxx.h>
  35 #endif
  36
  37 #include <os.h>
  38 #include <post.h>
  39 #include <spi.h>
  40 #include <trace.h>
  41 #include <watchdog.h>
  42 #include <asm/errno.h>
  43 #include <asm/io.h>
  44 #ifdef CONFIG_MP
  45 #include <asm/mp.h>
  46 #endif
  47 #include <asm/sections.h>
  48 #ifdef CONFIG_X86
  49 #include <asm/init_helpers.h>
  50 #include <asm/relocate.h>
  51 #endif
  52 #ifdef CONFIG_SANDBOX
  53 #include <asm/state.h>
  54 #endif
  55 #include <linux/compiler.h>
  56
  57 /*
  58  * Pointer to initial global data area
  59  *
  60  * Here we initialize it if needed.
  61  */
  62 #ifdef XTRN_DECLARE_GLOBAL_DATA_PTR
  63 #undef  XTRN_DECLARE_GLOBAL_DATA_PTR
  64 #define XTRN_DECLARE_GLOBAL_DATA_PTR    /* empty = allocate here */
  65 DECLARE_GLOBAL_DATA_PTR = (gd_t *) (CONFIG_SYS_INIT_GD_ADDR);
  66 #else
  67 DECLARE_GLOBAL_DATA_PTR;
  68 #endif
  69
  70 /*
  71  * sjg: IMO this code should be
  72  * refactored to a single function, something like:
  73  *
  74  * void led_set_state(enum led_colour_t colour, int on);
  75  */
  76 /************************************************************************
  77  * Coloured LED functionality
  78  ************************************************************************
  79  * May be supplied by boards if desired
  80  */
  81 inline void __coloured_LED_init(void) {}
  82 void coloured_LED_init(void)
  83         __attribute__((weak, alias("__coloured_LED_init")));
  84 inline void __red_led_on(void) {}
  85 void red_led_on(void) __attribute__((weak, alias("__red_led_on")));
  86 inline void __red_led_off(void) {}
  87 void red_led_off(void) __attribute__((weak, alias("__red_led_off")));
  88 inline void __green_led_on(void) {}
  89 void green_led_on(void) __attribute__((weak, alias("__green_led_on")));
  90 inline void __green_led_off(void) {}
  91 void green_led_off(void) __attribute__((weak, alias("__green_led_off")));
  92 inline void __yellow_led_on(void) {}
  93 void yellow_led_on(void) __attribute__((weak, alias("__yellow_led_on")));
  94 inline void __yellow_led_off(void) {}
  95 void yellow_led_off(void) __attribute__((weak, alias("__yellow_led_off")));
  96 inline void __blue_led_on(void) {}
  97 void blue_led_on(void) __attribute__((weak, alias("__blue_led_on")));
  98 inline void __blue_led_off(void) {}
  99 void blue_led_off(void) __attribute__((weak, alias("__blue_led_off")));
 100
 101 /*
 102  * Why is gd allocated a register? Prior to reloc it might be better to
 103  * just pass it around to each function in this file?
 104  *
 105  * After reloc one could argue that it is hardly used and doesn't need
 106  * to be in a register. Or if it is it should perhaps hold pointers to all
 107  * global data for all modules, so that post-reloc we can avoid the massive
 108  * literal pool we get on ARM. Or perhaps just encourage each module to use
 109  * a structure...
 110  */
 111
 112 /*
 113  * Could the CONFIG_SPL_BUILD infection become a flag in gd?
 114  */
 115
 116 #if defined(CONFIG_WATCHDOG)
 117 static int init_func_watchdog_init(void)
 118 {
 119         puts("       Watchdog enabled\n");
 120         WATCHDOG_RESET();
 121
 122         return 0;
 123 }
 124
 125 int init_func_watchdog_reset(void)
 126 {
 127         WATCHDOG_RESET();
 128
 129         return 0;
 130 }
 131 #endif /* CONFIG_WATCHDOG */
 132
 133 void __board_add_ram_info(int use_default)
 134 {
 135         /* please define platform specific board_add_ram_info() */
 136 }
 137
 138 void board_add_ram_info(int)
 139         __attribute__ ((weak, alias("__board_add_ram_info")));
 140
 141 static int init_baud_rate(void)
 142 {
 143         gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE);
 144         return 0;
 145 }
 146
 147 static int display_text_info(void)
 148 {
 149 #ifndef CONFIG_SANDBOX
 150         ulong bss_start, bss_end;
 151
 152         bss_start = (ulong)&__bss_start;
 153         bss_end = (ulong)&__bss_end;
 154
 155         debug("U-Boot code: %08X -> %08lX  BSS: -> %08lX\n",
 156               CONFIG_SYS_TEXT_BASE, bss_start, bss_end);
 157 #endif
 158
 159 #ifdef CONFIG_MODEM_SUPPORT
 160         debug("Modem Support enabled\n");
 161 #endif
 162 #ifdef CONFIG_USE_IRQ
 163         debug("IRQ Stack: %08lx\n", IRQ_STACK_START);
 164         debug("FIQ Stack: %08lx\n", FIQ_STACK_START);
 165 #endif
 166
 167         return 0;
 168 }
 169
 170 static int announce_dram_init(void)
 171 {
 172         puts("DRAM:  ");
 173         return 0;
 174 }
 175
 176 #if defined(CONFIG_MIPS) || defined(CONFIG_PPC)
 177 static int init_func_ram(void)
 178 {
 179 #ifdef  CONFIG_BOARD_TYPES
 180         int board_type = gd->board_type;
 181 #else
 182         int board_type = 0;     /* use dummy arg */
 183 #endif
 184
 185         gd->ram_size = initdram(board_type);
 186
 187         if (gd->ram_size > 0)
 188                 return 0;
 189
 190         puts("*** failed ***\n");
 191         return 1;
 192 }
 193 #endif
 194
 195 static int show_dram_config(void)
 196 {
 197         unsigned long long size;
 198
 199 #ifdef CONFIG_NR_DRAM_BANKS
 200         int i;
 201
 202         debug("\nRAM Configuration:\n");
 203         for (i = size = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
 204                 size += gd->bd->bi_dram[i].size;
 205                 debug("Bank #%d: %08lx ", i, gd->bd->bi_dram[i].start);
 206 #ifdef DEBUG
 207                 print_size(gd->bd->bi_dram[i].size, "\n");
 208 #endif
 209         }
 210         debug("\nDRAM:  ");
 211 #else
 212         size = gd->ram_size;
 213 #endif
 214
 215         print_size(size, "");
 216         board_add_ram_info(0);
 217         putc('\n');
 218
 219         return 0;
 220 }
 221
 222 void __dram_init_banksize(void)
 223 {
 224 #if defined(CONFIG_NR_DRAM_BANKS) && defined(CONFIG_SYS_SDRAM_BASE)
 225         gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
 226         gd->bd->bi_dram[0].size = get_effective_memsize();
 227 #endif
 228 }
 229
 230 void dram_init_banksize(void)
 231         __attribute__((weak, alias("__dram_init_banksize")));
 232
 233 #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C)
 234 static int init_func_i2c(void)
 235 {
 236         puts("I2C:   ");
 237 #ifdef CONFIG_SYS_I2C
 238         i2c_init_all();
 239 #else
 240         i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 241 #endif
 242         puts("ready\n");
 243         return 0;
 244 }
 245 #endif
 246
 247 #if defined(CONFIG_HARD_SPI)
 248 static int init_func_spi(void)
 249 {
 250         puts("SPI:   ");
 251         spi_init();
 252         puts("ready\n");
 253         return 0;
 254 }
 255 #endif
 256
 257 __maybe_unused
 258 static int zero_global_data(void)
 259 {
 260         memset((void *)gd, '\0', sizeof(gd_t));
 261
 262         return 0;
 263 }
 264
 265 static int setup_mon_len(void)
 266 {
 267 #ifdef __ARM__
 268         gd->mon_len = (ulong)&__bss_end - (ulong)_start;
 269 #elif defined(CONFIG_SANDBOX)
 270         gd->mon_len = (ulong)&_end - (ulong)_init;
 271 #else
 272         /* TODO: use (ulong)&__bss_end - (ulong)&__text_start; ? */
 273         gd->mon_len = (ulong)&__bss_end - CONFIG_SYS_MONITOR_BASE;
 274 #endif
 275         return 0;
 276 }
 277
 278 __weak int arch_cpu_init(void)
 279 {
 280         return 0;
 281 }
 282
 283 #ifdef CONFIG_OF_HOSTFILE
 284
 285 static int read_fdt_from_file(void)
 286 {
 287         struct sandbox_state *state = state_get_current();
 288         const char *fname = state->fdt_fname;
 289         void *blob;
 290         ssize_t size;
 291         int err;
 292         int fd;
 293
 294         blob = map_sysmem(CONFIG_SYS_FDT_LOAD_ADDR, 0);
 295         if (!state->fdt_fname) {
 296                 err = fdt_create_empty_tree(blob, 256);
 297                 if (!err)
 298                         goto done;
 299                 printf("Unable to create empty FDT: %s\n", fdt_strerror(err));
 300                 return -EINVAL;
 301         }
 302
 303         size = os_get_filesize(fname);
 304         if (size < 0) {
 305                 printf("Failed to file FDT file '%s'\n", fname);
 306                 return -ENOENT;
 307         }
 308         fd = os_open(fname, OS_O_RDONLY);
 309         if (fd < 0) {
 310                 printf("Failed to open FDT file '%s'\n", fname);
 311                 return -EACCES;
 312         }
 313         if (os_read(fd, blob, size) != size) {
 314                 os_close(fd);
 315                 return -EIO;
 316         }
 317         os_close(fd);
 318
 319 done:
 320         gd->fdt_blob = blob;
 321
 322         return 0;
 323 }
 324 #endif
 325
 326 #ifdef CONFIG_SANDBOX
 327 static int setup_ram_buf(void)
 328 {
 329         struct sandbox_state *state = state_get_current();
 330
 331         gd->arch.ram_buf = state->ram_buf;
 332         gd->ram_size = state->ram_size;
 333
 334         return 0;
 335 }
 336 #endif
 337
 338 static int setup_fdt(void)
 339 {
 340 #ifdef CONFIG_OF_EMBED
 341         /* Get a pointer to the FDT */
 342         gd->fdt_blob = __dtb_dt_begin;
 343 #elif defined CONFIG_OF_SEPARATE
 344         /* FDT is at end of image */
 345         gd->fdt_blob = (ulong *)&_end;
 346 #elif defined(CONFIG_OF_HOSTFILE)
 347         if (read_fdt_from_file()) {
 348                 puts("Failed to read control FDT\n");
 349                 return -1;
 350         }
 351 #endif
 352         /* Allow the early environment to override the fdt address */
 353         gd->fdt_blob = (void *)getenv_ulong("fdtcontroladdr", 16,
 354                                                 (uintptr_t)gd->fdt_blob);
 355         return 0;
 356 }
 357
 358 /* Get the top of usable RAM */
 359 __weak ulong board_get_usable_ram_top(ulong total_size)
 360 {
 361         return gd->ram_top;
 362 }
 363
 364 static int setup_dest_addr(void)
 365 {
 366         debug("Monitor len: %08lX\n", gd->mon_len);
 367         /*
 368          * Ram is setup, size stored in gd !!
 369          */
 370         debug("Ram size: %08lX\n", (ulong)gd->ram_size);
 371 #if defined(CONFIG_SYS_MEM_TOP_HIDE)
 372         /*
 373          * Subtract specified amount of memory to hide so that it won't
 374          * get "touched" at all by U-Boot. By fixing up gd->ram_size
 375          * the Linux kernel should now get passed the now "corrected"
 376          * memory size and won't touch it either. This should work
 377          * for arch/ppc and arch/powerpc. Only Linux board ports in
 378          * arch/powerpc with bootwrapper support, that recalculate the
 379          * memory size from the SDRAM controller setup will have to
 380          * get fixed.
 381          */
 382         gd->ram_size -= CONFIG_SYS_MEM_TOP_HIDE;
 383 #endif
 384 #ifdef CONFIG_SYS_SDRAM_BASE
 385         gd->ram_top = CONFIG_SYS_SDRAM_BASE;
 386 #endif
 387         gd->ram_top += get_effective_memsize();
 388         gd->ram_top = board_get_usable_ram_top(gd->mon_len);
 389         gd->relocaddr = gd->ram_top;
 390         debug("Ram top: %08lX\n", (ulong)gd->ram_top);
 391 #if defined(CONFIG_MP) && (defined(CONFIG_MPC86xx) || defined(CONFIG_E500))
 392         /*
 393          * We need to make sure the location we intend to put secondary core
 394          * boot code is reserved and not used by any part of u-boot
 395          */
 396         if (gd->relocaddr > determine_mp_bootpg(NULL)) {
 397                 gd->relocaddr = determine_mp_bootpg(NULL);
 398                 debug("Reserving MP boot page to %08lx\n", gd->relocaddr);
 399         }
 400 #endif
 401         return 0;
 402 }
 403
 404 #if defined(CONFIG_LOGBUFFER) && !defined(CONFIG_ALT_LB_ADDR)
 405 static int reserve_logbuffer(void)
 406 {
 407         /* reserve kernel log buffer */
 408         gd->relocaddr -= LOGBUFF_RESERVE;
 409         debug("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN,
 410                 gd->relocaddr);
 411         return 0;
 412 }
 413 #endif
 414
 415 #ifdef CONFIG_PRAM
 416 /* reserve protected RAM */
 417 static int reserve_pram(void)
 418 {
 419         ulong reg;
 420
 421         reg = getenv_ulong("pram", 10, CONFIG_PRAM);
 422         gd->relocaddr -= (reg << 10);           /* size is in kB */
 423         debug("Reserving %ldk for protected RAM at %08lx\n", reg,
 424               gd->relocaddr);
 425         return 0;
 426 }
 427 #endif /* CONFIG_PRAM */
 428
 429 /* Round memory pointer down to next 4 kB limit */
 430 static int reserve_round_4k(void)
 431 {
 432         gd->relocaddr &= ~(4096 - 1);
 433         return 0;
 434 }
 435
 436 #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF)) && \
 437                 defined(CONFIG_ARM)
 438 static int reserve_mmu(void)
 439 {
 440         /* reserve TLB table */
 441         gd->arch.tlb_size = PGTABLE_SIZE;
 442         gd->relocaddr -= gd->arch.tlb_size;
 443
 444         /* round down to next 64 kB limit */
 445         gd->relocaddr &= ~(0x10000 - 1);
 446
 447         gd->arch.tlb_addr = gd->relocaddr;
 448         debug("TLB table from %08lx to %08lx\n", gd->arch.tlb_addr,
 449               gd->arch.tlb_addr + gd->arch.tlb_size);
 450         return 0;
 451 }
 452 #endif
 453
 454 #ifdef CONFIG_LCD
 455 static int reserve_lcd(void)
 456 {
 457 #ifdef CONFIG_FB_ADDR
 458         gd->fb_base = CONFIG_FB_ADDR;
 459 #else
 460         /* reserve memory for LCD display (always full pages) */
 461         gd->relocaddr = lcd_setmem(gd->relocaddr);
 462         gd->fb_base = gd->relocaddr;
 463 #endif /* CONFIG_FB_ADDR */
 464         return 0;
 465 }
 466 #endif /* CONFIG_LCD */
 467
 468 static int reserve_trace(void)
 469 {
 470 #ifdef CONFIG_TRACE
 471         gd->relocaddr -= CONFIG_TRACE_BUFFER_SIZE;
 472         gd->trace_buff = map_sysmem(gd->relocaddr, CONFIG_TRACE_BUFFER_SIZE);
 473         debug("Reserving %dk for trace data at: %08lx\n",
 474               CONFIG_TRACE_BUFFER_SIZE >> 10, gd->relocaddr);
 475 #endif
 476
 477         return 0;
 478 }
 479
 480 #if defined(CONFIG_VIDEO) && (!defined(CONFIG_PPC) || defined(CONFIG_8xx)) \
 481                 && !defined(CONFIG_ARM) && !defined(CONFIG_X86)
 482 static int reserve_video(void)
 483 {
 484         /* reserve memory for video display (always full pages) */
 485         gd->relocaddr = video_setmem(gd->relocaddr);
 486         gd->fb_base = gd->relocaddr;
 487
 488         return 0;
 489 }
 490 #endif
 491
 492 static int reserve_uboot(void)
 493 {
 494         /*
 495          * reserve memory for U-Boot code, data & bss
 496          * round down to next 4 kB limit
 497          */
 498         gd->relocaddr -= gd->mon_len;
 499         gd->relocaddr &= ~(4096 - 1);
 500 #ifdef CONFIG_E500
 501         /* round down to next 64 kB limit so that IVPR stays aligned */
 502         gd->relocaddr &= ~(65536 - 1);
 503 #endif
 504
 505         debug("Reserving %ldk for U-Boot at: %08lx\n", gd->mon_len >> 10,
 506               gd->relocaddr);
 507
 508         gd->start_addr_sp = gd->relocaddr;
 509
 510         return 0;
 511 }
 512
 513 #ifndef CONFIG_SPL_BUILD
 514 /* reserve memory for malloc() area */
 515 static int reserve_malloc(void)
 516 {
 517         gd->start_addr_sp = gd->start_addr_sp - TOTAL_MALLOC_LEN;
 518         debug("Reserving %dk for malloc() at: %08lx\n",
 519                         TOTAL_MALLOC_LEN >> 10, gd->start_addr_sp);
 520         return 0;
 521 }
 522
 523 /* (permanently) allocate a Board Info struct */
 524 static int reserve_board(void)
 525 {
 526         gd->start_addr_sp -= sizeof(bd_t);
 527         gd->bd = (bd_t *)map_sysmem(gd->start_addr_sp, sizeof(bd_t));
 528         memset(gd->bd, '\0', sizeof(bd_t));
 529         debug("Reserving %zu Bytes for Board Info at: %08lx\n",
 530                         sizeof(bd_t), gd->start_addr_sp);
 531         return 0;
 532 }
 533 #endif
 534
 535 static int setup_machine(void)
 536 {
 537 #ifdef CONFIG_MACH_TYPE
 538         gd->bd->bi_arch_number = CONFIG_MACH_TYPE; /* board id for Linux */
 539 #endif
 540         return 0;
 541 }
 542
 543 static int reserve_global_data(void)
 544 {
 545         gd->start_addr_sp -= sizeof(gd_t);
 546         gd->new_gd = (gd_t *)map_sysmem(gd->start_addr_sp, sizeof(gd_t));
 547         debug("Reserving %zu Bytes for Global Data at: %08lx\n",
 548                         sizeof(gd_t), gd->start_addr_sp);
 549         return 0;
 550 }
 551
 552 static int reserve_fdt(void)
 553 {
 554         /*
 555          * If the device tree is sitting immediate above our image then we
 556          * must relocate it. If it is embedded in the data section, then it
 557          * will be relocated with other data.
 558          */
 559         if (gd->fdt_blob) {
 560                 gd->fdt_size = ALIGN(fdt_totalsize(gd->fdt_blob) + 0x1000, 32);
 561
 562                 gd->start_addr_sp -= gd->fdt_size;
 563                 gd->new_fdt = map_sysmem(gd->start_addr_sp, gd->fdt_size);
 564                 debug("Reserving %lu Bytes for FDT at: %08lx\n",
 565                       gd->fdt_size, gd->start_addr_sp);
 566         }
 567
 568         return 0;
 569 }
 570
 571 static int reserve_stacks(void)
 572 {
 573 #ifdef CONFIG_SPL_BUILD
 574 # ifdef CONFIG_ARM
 575         gd->start_addr_sp -= 128;       /* leave 32 words for abort-stack */
 576         gd->irq_sp = gd->start_addr_sp;
 577 # endif
 578 #else
 579 # ifdef CONFIG_PPC
 580         ulong *s;
 581 # endif
 582
 583         /* setup stack pointer for exceptions */
 584         gd->start_addr_sp -= 16;
 585         gd->start_addr_sp &= ~0xf;
 586         gd->irq_sp = gd->start_addr_sp;
 587
 588         /*
 589          * Handle architecture-specific things here
 590          * TODO(sjg@chromium.org): Perhaps create arch_reserve_stack()
 591          * to handle this and put in arch/xxx/lib/stack.c
 592          */
 593 # if defined(CONFIG_ARM) && !defined(CONFIG_ARM64)
 594 #  ifdef CONFIG_USE_IRQ
 595         gd->start_addr_sp -= (CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ);
 596         debug("Reserving %zu Bytes for IRQ stack at: %08lx\n",
 597                 CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ, gd->start_addr_sp);
 598
 599         /* 8-byte alignment for ARM ABI compliance */
 600         gd->start_addr_sp &= ~0x07;
 601 #  endif
 602         /* leave 3 words for abort-stack, plus 1 for alignment */
 603         gd->start_addr_sp -= 16;
 604 # elif defined(CONFIG_PPC)
 605         /* Clear initial stack frame */
 606         s = (ulong *) gd->start_addr_sp;
 607         *s = 0; /* Terminate back chain */
 608         *++s = 0; /* NULL return address */
 609 # endif /* Architecture specific code */
 610
 611         return 0;
 612 #endif
 613 }
 614
 615 static int display_new_sp(void)
 616 {
 617         debug("New Stack Pointer is: %08lx\n", gd->start_addr_sp);
 618
 619         return 0;
 620 }
 621
 622 #ifdef CONFIG_PPC
 623 static int setup_board_part1(void)
 624 {
 625         bd_t *bd = gd->bd;
 626
 627         /*
 628          * Save local variables to board info struct
 629          */
 630
 631         bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;        /* start of memory */
 632         bd->bi_memsize = gd->ram_size;                  /* size in bytes */
 633
 634 #ifdef CONFIG_SYS_SRAM_BASE
 635         bd->bi_sramstart = CONFIG_SYS_SRAM_BASE;        /* start of SRAM */
 636         bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE;         /* size  of SRAM */
 637 #endif
 638
 639 #if defined(CONFIG_8xx) || defined(CONFIG_MPC8260) || defined(CONFIG_5xx) || \
 640                 defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
 641         bd->bi_immr_base = CONFIG_SYS_IMMR;     /* base  of IMMR register     */
 642 #endif
 643 #if defined(CONFIG_MPC5xxx)
 644         bd->bi_mbar_base = CONFIG_SYS_MBAR;     /* base of internal registers */
 645 #endif
 646 #if defined(CONFIG_MPC83xx)
 647         bd->bi_immrbar = CONFIG_SYS_IMMR;
 648 #endif
 649
 650         return 0;
 651 }
 652
 653 static int setup_board_part2(void)
 654 {
 655         bd_t *bd = gd->bd;
 656
 657         bd->bi_intfreq = gd->cpu_clk;   /* Internal Freq, in Hz */
 658         bd->bi_busfreq = gd->bus_clk;   /* Bus Freq,      in Hz */
 659 #if defined(CONFIG_CPM2)
 660         bd->bi_cpmfreq = gd->arch.cpm_clk;
 661         bd->bi_brgfreq = gd->arch.brg_clk;
 662         bd->bi_sccfreq = gd->arch.scc_clk;
 663         bd->bi_vco = gd->arch.vco_out;
 664 #endif /* CONFIG_CPM2 */
 665 #if defined(CONFIG_MPC512X)
 666         bd->bi_ipsfreq = gd->arch.ips_clk;
 667 #endif /* CONFIG_MPC512X */
 668 #if defined(CONFIG_MPC5xxx)
 669         bd->bi_ipbfreq = gd->arch.ipb_clk;
 670         bd->bi_pcifreq = gd->pci_clk;
 671 #endif /* CONFIG_MPC5xxx */
 672
 673         return 0;
 674 }
 675 #endif
 676
 677 #ifdef CONFIG_SYS_EXTBDINFO
 678 static int setup_board_extra(void)
 679 {
 680         bd_t *bd = gd->bd;
 681
 682         strncpy((char *) bd->bi_s_version, "1.2", sizeof(bd->bi_s_version));
 683         strncpy((char *) bd->bi_r_version, U_BOOT_VERSION,
 684                 sizeof(bd->bi_r_version));
 685
 686         bd->bi_procfreq = gd->cpu_clk;  /* Processor Speed, In Hz */
 687         bd->bi_plb_busfreq = gd->bus_clk;
 688 #if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \
 689                 defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
 690                 defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 691         bd->bi_pci_busfreq = get_PCI_freq();
 692         bd->bi_opbfreq = get_OPB_freq();
 693 #elif defined(CONFIG_XILINX_405)
 694         bd->bi_pci_busfreq = get_PCI_freq();
 695 #endif
 696
 697         return 0;
 698 }
 699 #endif
 700
 701 #ifdef CONFIG_POST
 702 static int init_post(void)
 703 {
 704         post_bootmode_init();
 705         post_run(NULL, POST_ROM | post_bootmode_get(0));
 706
 707         return 0;
 708 }
 709 #endif
 710
 711 static int setup_dram_config(void)
 712 {
 713         /* Ram is board specific, so move it to board code ... */
 714         dram_init_banksize();
 715
 716         return 0;
 717 }
 718
 719 static int reloc_fdt(void)
 720 {
 721         if (gd->new_fdt) {
 722                 memcpy(gd->new_fdt, gd->fdt_blob, gd->fdt_size);
 723                 gd->fdt_blob = gd->new_fdt;
 724         }
 725
 726         return 0;
 727 }
 728
 729 static int setup_reloc(void)
 730 {
 731         gd->reloc_off = gd->relocaddr - CONFIG_SYS_TEXT_BASE;
 732         memcpy(gd->new_gd, (char *)gd, sizeof(gd_t));
 733
 734         debug("Relocation Offset is: %08lx\n", gd->reloc_off);
 735         debug("Relocating to %08lx, new gd at %08lx, sp at %08lx\n",
 736               gd->relocaddr, (ulong)map_to_sysmem(gd->new_gd),
 737               gd->start_addr_sp);
 738
 739         return 0;
 740 }
 741
 742 /* ARM calls relocate_code from its crt0.S */
 743 #if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX)
 744
 745 static int jump_to_copy(void)
 746 {
 747         /*
 748          * x86 is special, but in a nice way. It uses a trampoline which
 749          * enables the dcache if possible.
 750          *
 751          * For now, other archs use relocate_code(), which is implemented
 752          * similarly for all archs. When we do generic relocation, hopefully
 753          * we can make all archs enable the dcache prior to relocation.
 754          */
 755 #ifdef CONFIG_X86
 756         /*
 757          * SDRAM and console are now initialised. The final stack can now
 758          * be setup in SDRAM. Code execution will continue in Flash, but
 759          * with the stack in SDRAM and Global Data in temporary memory
 760          * (CPU cache)
 761          */
 762         board_init_f_r_trampoline(gd->start_addr_sp);
 763 #else
 764         relocate_code(gd->start_addr_sp, gd->new_gd, gd->relocaddr);
 765 #endif
 766
 767         return 0;
 768 }
 769 #endif
 770
 771 /* Record the board_init_f() bootstage (after arch_cpu_init()) */
 772 static int mark_bootstage(void)
 773 {
 774         bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_F, "board_init_f");
 775
 776         return 0;
 777 }
 778
 779 static init_fnc_t init_sequence_f[] = {
 780 #ifdef CONFIG_SANDBOX
 781         setup_ram_buf,
 782 #endif
 783         setup_mon_len,
 784         setup_fdt,
 785         trace_early_init,
 786 #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
 787         /* TODO: can this go into arch_cpu_init()? */
 788         probecpu,
 789 #endif
 790         arch_cpu_init,          /* basic arch cpu dependent setup */
 791 #ifdef CONFIG_X86
 792         cpu_init_f,             /* TODO(sjg@chromium.org): remove */
 793 # ifdef CONFIG_OF_CONTROL
 794         find_fdt,               /* TODO(sjg@chromium.org): remove */
 795 # endif
 796 #endif
 797         mark_bootstage,
 798 #ifdef CONFIG_OF_CONTROL
 799         fdtdec_check_fdt,
 800 #endif
 801 #if defined(CONFIG_BOARD_EARLY_INIT_F)
 802         board_early_init_f,
 803 #endif
 804         /* TODO: can any of this go into arch_cpu_init()? */
 805 #if defined(CONFIG_PPC) && !defined(CONFIG_8xx_CPUCLK_DEFAULT)
 806         get_clocks,             /* get CPU and bus clocks (etc.) */
 807 #if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) \
 808                 && !defined(CONFIG_TQM885D)
 809         adjust_sdram_tbs_8xx,
 810 #endif
 811         /* TODO: can we rename this to timer_init()? */
 812         init_timebase,
 813 #endif
 814 #if defined(CONFIG_ARM) || defined(CONFIG_MIPS)
 815         timer_init,             /* initialize timer */
 816 #endif
 817 #ifdef CONFIG_SYS_ALLOC_DPRAM
 818 #if !defined(CONFIG_CPM2)
 819         dpram_init,
 820 #endif
 821 #endif
 822 #if defined(CONFIG_BOARD_POSTCLK_INIT)
 823         board_postclk_init,
 824 #endif
 825 #ifdef CONFIG_FSL_ESDHC
 826         get_clocks,
 827 #endif
 828         env_init,               /* initialize environment */
 829 #if defined(CONFIG_8xx_CPUCLK_DEFAULT)
 830         /* get CPU and bus clocks according to the environment variable */
 831         get_clocks_866,
 832         /* adjust sdram refresh rate according to the new clock */
 833         sdram_adjust_866,
 834         init_timebase,
 835 #endif
 836         init_baud_rate,         /* initialze baudrate settings */
 837         serial_init,            /* serial communications setup */
 838         console_init_f,         /* stage 1 init of console */
 839 #ifdef CONFIG_SANDBOX
 840         sandbox_early_getopt_check,
 841 #endif
 842 #ifdef CONFIG_OF_CONTROL
 843         fdtdec_prepare_fdt,
 844 #endif
 845         display_options,        /* say that we are here */
 846         display_text_info,      /* show debugging info if required */
 847 #if defined(CONFIG_MPC8260)
 848         prt_8260_rsr,
 849         prt_8260_clks,
 850 #endif /* CONFIG_MPC8260 */
 851 #if defined(CONFIG_MPC83xx)
 852         prt_83xx_rsr,
 853 #endif
 854 #ifdef CONFIG_PPC
 855         checkcpu,
 856 #endif
 857         print_cpuinfo,          /* display cpu info (and speed) */
 858 #if defined(CONFIG_MPC5xxx)
 859         prt_mpc5xxx_clks,
 860 #endif /* CONFIG_MPC5xxx */
 861 #if defined(CONFIG_DISPLAY_BOARDINFO)
 862         checkboard,             /* display board info */
 863 #endif
 864         INIT_FUNC_WATCHDOG_INIT
 865 #if defined(CONFIG_MISC_INIT_F)
 866         misc_init_f,
 867 #endif
 868         INIT_FUNC_WATCHDOG_RESET
 869 #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C)
 870         init_func_i2c,
 871 #endif
 872 #if defined(CONFIG_HARD_SPI)
 873         init_func_spi,
 874 #endif
 875 #ifdef CONFIG_X86
 876         dram_init_f,            /* configure available RAM banks */
 877         calculate_relocation_address,
 878 #endif
 879         announce_dram_init,
 880         /* TODO: unify all these dram functions? */
 881 #ifdef CONFIG_ARM
 882         dram_init,              /* configure available RAM banks */
 883 #endif
 884 #if defined(CONFIG_MIPS) || defined(CONFIG_PPC)
 885         init_func_ram,
 886 #endif
 887 #ifdef CONFIG_POST
 888         post_init_f,
 889 #endif
 890         INIT_FUNC_WATCHDOG_RESET
 891 #if defined(CONFIG_SYS_DRAM_TEST)
 892         testdram,
 893 #endif /* CONFIG_SYS_DRAM_TEST */
 894         INIT_FUNC_WATCHDOG_RESET
 895
 896 #ifdef CONFIG_POST
 897         init_post,
 898 #endif
 899         INIT_FUNC_WATCHDOG_RESET
 900         /*
 901          * Now that we have DRAM mapped and working, we can
 902          * relocate the code and continue running from DRAM.
 903          *
 904          * Reserve memory at end of RAM for (top down in that order):
 905          *  - area that won't get touched by U-Boot and Linux (optional)
 906          *  - kernel log buffer
 907          *  - protected RAM
 908          *  - LCD framebuffer
 909          *  - monitor code
 910          *  - board info struct
 911          */
 912         setup_dest_addr,
 913 #if defined(CONFIG_LOGBUFFER) && !defined(CONFIG_ALT_LB_ADDR)
 914         reserve_logbuffer,
 915 #endif
 916 #ifdef CONFIG_PRAM
 917         reserve_pram,
 918 #endif
 919         reserve_round_4k,
 920 #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF)) && \
 921                 defined(CONFIG_ARM)
 922         reserve_mmu,
 923 #endif
 924 #ifdef CONFIG_LCD
 925         reserve_lcd,
 926 #endif
 927         reserve_trace,
 928         /* TODO: Why the dependency on CONFIG_8xx? */
 929 #if defined(CONFIG_VIDEO) && (!defined(CONFIG_PPC) || defined(CONFIG_8xx)) \
 930                 && !defined(CONFIG_ARM) && !defined(CONFIG_X86)
 931         reserve_video,
 932 #endif
 933         reserve_uboot,
 934 #ifndef CONFIG_SPL_BUILD
 935         reserve_malloc,
 936         reserve_board,
 937 #endif
 938         setup_machine,
 939         reserve_global_data,
 940         reserve_fdt,
 941         reserve_stacks,
 942         setup_dram_config,
 943         show_dram_config,
 944 #ifdef CONFIG_PPC
 945         setup_board_part1,
 946         INIT_FUNC_WATCHDOG_RESET
 947         setup_board_part2,
 948 #endif
 949         display_new_sp,
 950 #ifdef CONFIG_SYS_EXTBDINFO
 951         setup_board_extra,
 952 #endif
 953         INIT_FUNC_WATCHDOG_RESET
 954         reloc_fdt,
 955         setup_reloc,
 956 #if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX)
 957         jump_to_copy,
 958 #endif
 959         NULL,
 960 };
 961
 962 void board_init_f(ulong boot_flags)
 963 {
 964 #ifdef CONFIG_SYS_GENERIC_GLOBAL_DATA
 965         /*
 966          * For some archtectures, global data is initialized and used before
 967          * calling this function. The data should be preserved. For others,
 968          * CONFIG_SYS_GENERIC_GLOBAL_DATA should be defined and use the stack
 969          * here to host global data until relocation.
 970          */
 971         gd_t data;
 972
 973         gd = &data;
 974
 975         /*
 976          * Clear global data before it is accessed at debug print
 977          * in initcall_run_list. Otherwise the debug print probably
 978          * get the wrong vaule of gd->have_console.
 979          */
 980         zero_global_data();
 981 #endif
 982
 983         gd->flags = boot_flags;
 984         gd->have_console = 0;
 985
 986         if (initcall_run_list(init_sequence_f))
 987                 hang();
 988
 989 #if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX)
 990         /* NOTREACHED - jump_to_copy() does not return */
 991         hang();
 992 #endif
 993 }
 994
 995 #ifdef CONFIG_X86
 996 /*
 997  * For now this code is only used on x86.
 998  *
 999  * init_sequence_f_r is the list of init functions which are run when
1000  * U-Boot is executing from Flash with a semi-limited 'C' environment.
1001  * The following limitations must be considered when implementing an
1002  * '_f_r' function:
1003  *  - 'static' variables are read-only
1004  *  - Global Data (gd->xxx) is read/write
1005  *
1006  * The '_f_r' sequence must, as a minimum, copy U-Boot to RAM (if
1007  * supported).  It _should_, if possible, copy global data to RAM and
1008  * initialise the CPU caches (to speed up the relocation process)
1009  *
1010  * NOTE: At present only x86 uses this route, but it is intended that
1011  * all archs will move to this when generic relocation is implemented.
1012  */
1013 static init_fnc_t init_sequence_f_r[] = {
1014         init_cache_f_r,
1015         copy_uboot_to_ram,
1016         clear_bss,
1017         do_elf_reloc_fixups,
1018
1019         NULL,
1020 };
1021
1022 void board_init_f_r(void)
1023 {
1024         if (initcall_run_list(init_sequence_f_r))
1025                 hang();
1026
1027         /*
1028          * U-Boot has been copied into SDRAM, the BSS has been cleared etc.
1029          * Transfer execution from Flash to RAM by calculating the address
1030          * of the in-RAM copy of board_init_r() and calling it
1031          */
1032         (board_init_r + gd->reloc_off)(gd, gd->relocaddr);
1033
1034         /* NOTREACHED - board_init_r() does not return */
1035         hang();
1036 }
1037 #endif /* CONFIG_X86 */